aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2020-03-24serial: uartps: Remove unconditional wait inside set_termiosRaviteja Narayanam1-14/+2
set_termios function should not wait for the transmit FIFO empty (CDNS_UART_SR_TXEMPTY) unconditionally. The tty layer takes care of it based on the parameter passed (TCSANOW/TCSADRAIN/TCSAFLUSH). Signed-off-by: Raviteja Narayanam <[email protected]> Signed-off-by: Shubhrajyoti Datta <[email protected]> Link: https://lore.kernel.org/r/536e190dd5bbb474007a67e6323c048288942a28.1584610774.git.shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-23Merge 5.6-rc7 into tty-nextGreg Kroah-Hartman1-8/+6
We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-23Merge 5.6-rc7 into char-misc-nextGreg Kroah-Hartman1-8/+6
We need the char/misc driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: fix compat TIOCGSERIAL checking wrong function ptrEric Biggers1-1/+1
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start checking for the presence of the ->set_serial function pointer rather than ->get_serial. This appears to be a copy-and-paste error, since ->get_serial is the function pointer that is called as well as the pointer that is checked by the non-compat version of TIOCGSERIAL. Fix this by checking the correct function pointer. Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <[email protected]> # v4.20+ Signed-off-by: Eric Biggers <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: fix compat TIOCGSERIAL leaking uninitialized memoryEric Biggers1-1/+3
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start copying a whole 'serial_struct32' to userspace rather than individual fields, but failed to initialize all padding and fields -- namely the hole after the 'iomem_reg_shift' field, and the 'reserved' field. Fix this by initializing the struct to zero. [v2: use sizeof, and convert the adjacent line for consistency.] Reported-by: [email protected] Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <[email protected]> # v4.20+ Signed-off-by: Eric Biggers <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: drop outdated comments about release_tty() lockingEric Biggers1-6/+2
The current version of the TTY code unlocks the tty_struct(s) before release_tty() rather than after. Moreover, tty_unlock_pair() no longer exists. Thus, remove the outdated comments regarding tty_unlock_pair(). Signed-off-by: Eric Biggers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: n_tracesink: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file related to Kernel driver API to route trace data. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Nishad Kamdar <[email protected]> Link: https://lore.kernel.org/r/20200302143642.GA3335@nishad Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: hvc: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file related to the HVC driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Nishad Kamdar <[email protected]> Link: https://lore.kernel.org/r/20200301170419.GA7125@nishad Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: nozomi: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-34/+33
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Also rewrite the code in a standard if-form instead of ugly conditional operators. Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: serial: pch_uart: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-11/+11
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: nozomi: fix spelling mistake "reserverd" -> "reserved"Alexandre Belloni1-1/+1
The reserved bits should be named reserved. Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18serial: sprd: remove redundant sprd_port cleanupChunyan Zhang1-3/+1
We don't need to cleanup sprd_port anymore, since we've dropped the way of using the sprd_port[] array to get port index. Reviewed-by: Baolin Wang <[email protected]> Signed-off-by: Chunyan Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18serial: sprd: getting port index via serial aliases onlyChunyan Zhang1-31/+5
This patch simplifies the process of getting serial port number, with this patch, serial devices must have aliases configured in devicetree. The serial port searched out via sprd_port array maybe wrong if we don't have serial alias defined in devicetree, and specify console with command line, we would get the wrong port number if other serial ports probe failed before console's. So using aliases is mandatory. Reviewed-by: Baolin Wang <[email protected]> Signed-off-by: Chunyan Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: serial: Add CONSOLE_POLL support to SiFive UARTVincent Chen1-0/+27
Add CONSOLE_POLL support for future KGDB porting. Signed-off-by: Vincent Chen <[email protected]> Changes since v1: 1. Fix the compile error reported by kbuild test robot Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17serial: 8250_port: Disable DMA operations for kernel consoleAndy Shevchenko1-3/+8
It would be too tricky and error prone to allow DMA operations on kernel console. One of the concern is when DMA is a separate device, for example on Intel CherryTrail platforms, and might need special work around to be functional, see the commit eebb3e8d8aaf ("ACPI / LPSS: override power state for LPSS DMA device") for more information. Another one is that kernel console is used in atomic context, e.g. when printing crucial information to the user (Oops or crash), and DMA may not serve due to power management complications including non-atomic ACPI calls but not limited to it (see above). Besides that, other concerns are described in the commit 84b40e3b57ee ("serial: 8250: omap: Disable DMA for console UART") done for OMAP UART and may be repeated here. Disable any kind of DMA operations on kernel console due to above concerns. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17serial: 8250_port: Don't use power management for kernel consoleAndy Shevchenko2-4/+29
Doing any kind of power management for kernel console is really bad idea. First of all, it runs in poll and atomic mode. This fact attaches a limitation on the functions that might be called. For example, pm_runtime_get_sync() might sleep and thus can't be used. This call needs, for example, to bring the device to powered on state on the system, where the power on sequence may require on-atomic operations, such as Intel Cherrytrail with ACPI enumerated UARTs. That said, on ACPI enabled platforms it might even call firmware for a job. On the other hand pm_runtime_get() doesn't guarantee that device will become powered on fast enough. Besides that, imagine the case when console is about to print a kernel Oops and it's powered off. In such an emergency case calling the complex functions is not the best what we can do, taking into consideration that user wants to see at least something of the last kernel word before it passes away. Here we modify the 8250 console code to prevent runtime power management. Note, there is a behaviour change for OMAP boards. It will require to detach kernel console to become idle. Link: https://lists.openwall.net/linux-kernel/2018/09/29/65 Suggested-by: Russell King <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17serial: core: Allow detach and attach serial device for consoleAndy Shevchenko1-4/+56
In the future we would like to disable power management on the serial devices used as kernel consoles to avoid weird behaviour in some cases. However, disabling PM may prevent system to go to deep sleep states, which in its turn leads to the higher power consumption. Tony Lindgren proposed a work around, i.e. allow user to detach such consoles to make PM working again. In case user wants to see what's going on, it also provides a mechanism to attach console back. Link: https://lists.openwall.net/linux-kernel/2018/09/29/65 Suggested-by: Tony Lindgren <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17Revert "tty: serial: samsung_tty: build it for any platform"Geert Uytterhoeven1-0/+1
This reverts commit 175b558d0efb8b4f33aa7bd2c1b5389b912d3019. When the user configures a kernel without support for Samsung SoCs, it makes no sense to ask the user about enabling "Samsung SoC serial support", as Samsung serial ports can only be found on Samsung SoCs. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17serial: sprd: Fix a dereference warningLanqing Liu1-2/+1
We should validate if the 'sup' is NULL or not before freeing DMA memory, to fix below warning. "drivers/tty/serial/sprd_serial.c:1141 sprd_remove() error: we previously assumed 'sup' could be null (see line 1132)" Fixes: f4487db58eb7 ("serial: sprd: Add DMA mode support") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Lanqing Liu <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/e2bd92691538e95b04a2c2a728f3292e1617018f.1584325957.git.liuhhome@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17serial: sprd: remove __init from sprd_console_setupChunyan Zhang1-1/+1
The function sprd_console_setup() would be called from .probe() which can be called after freeing __init functions, for example the .probe() would return -EPROBE_DEFER since it depends on clock modules. Signed-off-by: Chunyan Zhang <[email protected]> Reviewed-by: Baolin Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17serial: sprd: check console via stdout-path in additionChunyan Zhang1-1/+2
The SPRD serial driver need to know which serial port would be used as console in an early period during initialization, the purpose is to keep the console port alive as possible even if there's some error caused by no clock configured under serial devicetree nodes. But with the patch [1], the console port couldn't be identified if missing console command line. So this patch adds using another interface to do check by reading stdout-path. [1] https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Chunyan Zhang <[email protected]> Reviewed-by: Baolin Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17tty: evh_bytechan: Fix out of bounds accessesStephen Rothwell1-3/+18
ev_byte_channel_send() assumes that its third argument is a 16 byte array. Some places where it is called it may not be (or we can't easily tell if it is). Newer compilers have started producing warnings about this, so make sure we actually pass a 16 byte array. There may be more elegant solutions to this, but the driver is quite old and hasn't been updated in many years. The warnings (from a powerpc allyesconfig build) are: In file included from include/linux/byteorder/big_endian.h:5, from arch/powerpc/include/uapi/asm/byteorder.h:14, from include/asm-generic/bitops/le.h:6, from arch/powerpc/include/asm/bitops.h:250, from include/linux/bitops.h:29, from include/linux/kernel.h:12, from include/asm-generic/bug.h:19, from arch/powerpc/include/asm/bug.h:109, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/gfp.h:5, from include/linux/slab.h:15, from drivers/tty/ehv_bytechan.c:24: drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’: arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds] 298 | r6 = be32_to_cpu(p[1]); include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’ 40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) | ^ arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’ 298 | r6 = be32_to_cpu(p[1]); | ^~~~~~~~~~~ drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’ 166 | static void ehv_bc_udbg_putc(char c) | ^~~~~~~~~~~~~~~~ Fixes: dcd83aaff1c8 ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by: Stephen Rothwell <[email protected]> Tested-by: Laurentiu Tudor <[email protected]> [mpe: Trim warnings from change log] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-03-16vt: indent switch-case in setterm_command properlyJiri Slaby1-61/+59
Shift cases one level left. This makes the code more readable and some lines need not wrap anymore. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-16vt: selection, use rounddown() for start/endline computationJiri Slaby1-3/+3
We have a helper called rounddown for these modulo computations. So use it. No functional change intended and "objdump -d" proves that. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-16vt: use min() to limit intervalsJiri Slaby1-2/+2
Instead of awkward ternary operator with comparison, use simple min() for blankinterval and vesa_off_interval. No functional change intended and "objdump -d" proves that. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-16tty: n_hdlc, remove FILE and LINE from pr_debugJiri Slaby1-21/+12
As Joe suggests, dynamic debug can print module name and line number along with message. So remove __FILE__ and __LINE__ from all those pr_debug calls. Out of curiosity, I measured the savings, 200 bytes of code are gone. Signed-off-by: Jiri Slaby <[email protected]> Suggested-by: Joe Perches <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-16vt: selection, fix double lock introduced by a mergeJiri Slaby1-1/+0
The merge commit cb05c6c82fb0 (Merge 5.6-rc5 into tty-next) introduced a double lock to set_selection_kernel. vc_sel.lock is locked both in set_selection_kernel and its callee __set_selection_kernel now. Remove the latter. Signed-off-by: Jiri Slaby <[email protected]> Cc: Stephen Rothwell <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-14tty: serial: qcom_geni_serial: Don't try to manually disable the consoleDouglas Anderson1-4/+0
The geni serial driver's shutdown code had a special case to call console_stop(). Grepping through the code, it was the only serial driver doing something like this (the only other caller of console_stop() was in serial_core.c). As far as I can tell there's no reason to call console_stop() in the geni code. ...and a good reason _not_ to call it. Specifically if you have an agetty running on the same serial port as the console then killing the agetty kills your console and if you start the agetty again the console doesn't come back. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20200313134635.2.I3648fac6c98b887742934146ac2729ecb7232eb1@changeid Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-14tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdownDouglas Anderson1-6/+0
On a board using qcom_geni_serial I found that I could no longer interact with kdb if I got a crash after the "agetty" running on the same serial port was killed. This meant that various classes of crashes that happened at reboot time were undebuggable. Reading through the code, I couldn't figure out why qcom_geni_serial felt the need to run so much code at port shutdown time. All we need to do is disable the interrupt. After I make this change then a hardcoded kgdb_breakpoint in some late shutdown code now allows me to interact with the debugger. I also could freely close / re-open the port without problems. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20200313134635.1.Icf54c533065306b02b880c46dfd401d8db34e213@changeid Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12vt: vt_ioctl: remove unnecessary console allocation checksEric Biggers1-15/+1
The vc_cons_allocated() checks in vt_ioctl() and vt_compat_ioctl() are unnecessary because they can only be reached by calling ioctl() on an open tty, which implies the corresponding virtual console is allocated. And even if the virtual console *could* be freed concurrently, then these checks would be broken since they aren't done under console_lock, and the vc_data is dereferenced before them anyway. So, remove these unneeded checks to avoid confusion. Signed-off-by: Eric Biggers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12vt: drop redundant might_sleep() in do_con_write()Eric Biggers1-2/+0
The might_sleep() in do_con_write() is redundant because console_lock() already contains might_sleep(). Remove it. Signed-off-by: Eric Biggers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: reorganize tty & serial menusRandy Dunlap1-87/+86
Move LDISC_AUTOLOAD ahead of the Serial drivers menu. Move the Serial drivers menu ahead of the Non-standard serial port support menu. Move NOZOMI out of the SERIAL_NONSTANDARD area since it does not depend on SERIAL_NONSTANDARD and it breaks the SERIAL_NONSTANDARD menu list. Alphabetize the remaining drivers (in tty/Kconfig) by their prompt strings. [The drivers in tty/hvc/Kconfig and tty/serial/Kconfig have not been alphabetized.] Cc: Jiri Slaby <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Arnd Bergmann <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: source all tty Kconfig files in one placeRandy Dunlap3-7/+6
'source' (include) all of the tty/*/Kconfig files from drivers/tty/Kconfig instead of from drivers/char/Kconfig. This consolidates them both in source code and in menu presentation to the user. Move hvc/Kconfig and serial/Kconfig 'source' lines into the if TTY/endif block and remove the if TTY/endif blocks from those 2 files. Cc: [email protected] Cc: Jiri Slaby <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Arnd Bergmann <[email protected]> Suggested-by: Jiri Slaby <[email protected]> Suggested-by: Arnd Bergmann <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12serial: core: Refactor uart_unlock_and_check_sysrq()Andy Shevchenko1-13/+10
Refactor uart_unlock_and_check_sysrq() to: - explicitly show that we release a port lock which makes static analyzers happy: CHECK drivers/tty/serial/serial_core.c .../serial_core.c:3290:17: warning: context imbalance in 'uart_unlock_and_check_sysrq' - unexpected unlock - use flags instead of irqflags to avoid confusion with IRQ flags - provide one return point - be more compact Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Dmitry Safonov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12serial: core: Use uart_console() helper in SysRq codeAndy Shevchenko1-7/+5
Use uart_console() helper in SysRq code instead of open coded variant. This eliminates the conditional entirely for SERIAL_CORE_CONSOLE=n case. While here, refactor the conditional to be more compact. Reviewed-by: Dmitry Safonov <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12serial: core: Print escaped SysRq Magic sequence if enabledAndy Shevchenko1-1/+4
It is useful to see on the serial console the magic sequence itself to enable SysRq without rummaging source code. Reviewed-by: Dmitry Safonov <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12serial: core: Use string length for SysRq magic sequenceAndy Shevchenko1-3/+4
Compiler is not happy about using ARRAY_SIZE() in comparison to smaller type: CC drivers/tty/serial/serial_core.o .../serial_core.c: In function ‘uart_try_toggle_sysrq’: .../serial_core.c:3222:24: warning: comparison is always false due to limited range of data type [-Wtype-limits] 3222 | if (++port->sysrq_seq < (ARRAY_SIZE(sysrq_toggle_seq) - 1)) { | ^ Looking at the code it appears that there is an additional weirdness, i.e. use ARRAY_SIZE() against simple string literal. Yes, the idea probably was to allow '\0' in the sequence, but it's impractical: kernel configuration won't accept it to begin with followed by a comment about '\0' before comparison in question. Drop all these by switching to strlen() and convert code accordingly. Note, GCC seems clever enough to calculate string length at compile time. Fixes: 68af43173d3f ("serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE") Reviewed-by: Dmitry Safonov <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probesatya priya1-10/+9
To fix the RX cancel command failure, rx_fifo buffer needs to be flushed in stop_rx() by calling handle_rx().In handle_rx() the data in rx_fifo buffer is read and then dropped, not sent to upper layers. If set_termios is called before startup, by this time memory is not allocated to port->rx_fifo buffer, which leads to a NULL pointer dereference. To avoid this NULL pointer dereference allocate memory to port->rx_fifo in probe itself. Signed-off-by: satya priya <[email protected]> Reported-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: serial: ifx6x60: Convert to GPIO descriptorsLinus Walleij2-118/+65
This driver for the Intel MID never seems to have been properly integrated upstream: the platform data in <linux/spi/ifx_modem.h> is not used anywhere in the kernel and haven't been since it was merged into the kernel in 2010. There might be out-of-tree users, so I don't want to delete the driver, but I will refactor it to use GPIO descriptors, which means that out-of-tree users will need to adapt. There are several examples in the kernel of how to provide the resources necessary for using GPIO descriptors to pass in the GPIO lines, for the MID platform in particular, it will suffice to inspect the code in files like: arch/x86/platform/intel-mid/device_libs/platform_bt.c This refactoring transfers all GPIOs in the driver, including a hard-coded "PMU reset" in the driver to use GPIO descriptors instead. The following named GPIO descriptors need to be supplied: - reset - power - mrdy - srdy - rst_out - pmu_reset Cc: Russ Gorby <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: serial: ifx6x60: Use helper variable for devLinus Walleij1-22/+23
The &spi->dev is used so many times that the code gets visibly better by introducing a simple dev helper variable. Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: serial: fsl_lpuart: add LS1028A earlycon supportMichael Walle1-8/+43
Add a early_console_setup() for the LS1028A SoC with 32bit, little endian access. If the bootloader does a fixup of the clock-frequency node the baudrate divisor register will automatically be set. Signed-off-by: Michael Walle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: serial: fsl_lpuart: add LS1028A supportMichael Walle1-2/+25
The LS1028A uses little endian register access and has a different FIFO size encoding. Signed-off-by: Michael Walle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: serial: fsl_lpuart: fix DMA mappingMichael Walle1-20/+28
Use the correct device to request the DMA mapping. Otherwise the IOMMU doesn't get the mapping and it will generate a page fault. The error messages look like: [ 19.012140] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xbbfff800, fsynr=0x3e0021, cbfrsynra=0x828, cb=9 [ 19.023593] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xbbfff800, fsynr=0x3e0021, cbfrsynra=0x828, cb=9 This was tested on a custom board with a LS1028A SoC. Signed-off-by: Michael Walle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: serial: fsl_lpuart: fix DMA operation when using IOMMUMichael Walle1-31/+57
The DMA channel might not be available at probe time. This is esp. the case if the DMA controller has an IOMMU mapping. There is also another caveat. If there is no DMA controller at all, dma_request_chan() will also return -EPROBE_DEFER. Thus we cannot test for -EPROBE_DEFER in probe(). Otherwise the lpuart driver will fail to probe if, for example, the DMA driver is not enabled in the kernel configuration. To workaround this, we request the DMA channel in _startup(). Other serial drivers do it the same way. Signed-off-by: Michael Walle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty/serial: atmel: Use uart_console() helperAndy Shevchenko1-15/+5
Use uart_console() helper in instead of open coded variant. Note, SERIAL_CORE_CONSOLE is selected by SERIAL_ATMEL_CONSOLE, thus no functional changes expected. Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Richard Genoud <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12serial: pic32_uart: Use uart_console() helperAndy Shevchenko1-7/+1
Use uart_console() helper in instead of open coded variant. Note, SERIAL_CORE_CONSOLE is selected by SERIAL_PIC32_CONSOLE, thus no functional changes expected. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-12tty: sifive: Finish transmission before changing the clockPalmer Dabbelt1-4/+24
SiFive's UART has a software controller clock divider that produces the final baud rate clock. Whenever the clock that drives the UART is changed this divider must be updated accordingly, and given that these two events are controlled by software they cannot be done atomically. During the period between updating the UART's driving clock and internal divider the UART will transmit a different baud rate than what the user has configured, which will probably result in a corrupted transmission stream. The SiFive UART has a FIFO, but due to an issue with the programming interface there is no way to directly determine when the UART has finished transmitting. We're essentially restricted to dead reckoning in order to figure that out: we can use the FIFO's TX busy register to figure out when the last frame has begun transmission and just delay for a long enough that the last frame is guaranteed to get out. As far as the actual implementation goes: I've modified the existing existing clock notifier function to drain both the FIFO and the shift register in on PRE_RATE_CHANGE. As far as I know there is no hardware flow control in this UART, so there's no good way to ask the other end to stop transmission while we can't receive (inserting software flow control messages seems like a bad idea here). Signed-off-by: Palmer Dabbelt <[email protected]> Tested-by: Yash Shah <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-10Merge 5.6-rc5 into tty-nextGreg Kroah-Hartman6-26/+88
We need the vt fixes in here and it resolves a merge issue with drivers/tty/vt/selection.c Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-07tty: mips_ejtag_fdc: Mark expected switch fall-throughSerge Semin1-0/+1
Mark mips_ejtag_fdc_encode() methods switch-case-4 as expecting to fall through. This patch fixes the following warning: drivers/tty/mips_ejtag_fdc.c: In function ‘mips_ejtag_fdc_encode’: drivers/tty/mips_ejtag_fdc.c:245:13: warning: this statement may fall through [-Wimplicit-fallthrough=] word.word &= 0x00ffffff; ~~~~~~~~~~^~~~~~~~~~~~~ drivers/tty/mips_ejtag_fdc.c:246:2: note: here case 3: ^~~~ Signed-off-by: Serge Semin <[email protected]> Signed-off-by: Alexey Malahov <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: Paul Burton <[email protected]> Cc: Ralf Baechle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-07serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCEDmitry Safonov1-7/+68
Many embedded boards have a disconnected TTL level serial which can generate some garbage that can lead to spurious false sysrq detects. Currently, sysrq can be either completely disabled for serial console or always disabled (with CONFIG_MAGIC_SYSRQ_SERIAL), since commit 732dbf3a6104 ("serial: do not accept sysrq characters via serial port") At Arista, we have such boards that can generate BREAK and random garbage. While disabling sysrq for serial console would solve the problem with spurious false sysrq triggers, it's also desirable to have a way to enable sysrq back. As a measure of balance between on and off options, add MAGIC_SYSRQ_SERIAL_SEQUENCE which is a string sequence that can enable sysrq if it follows BREAK on a serial line. The longer the string - the less likely it may be in the garbage. Having the way to enable sysrq was beneficial to debug lockups with a manual investigation in field and on the other side preventing false sysrq detections. Based-on-patch-by: Vasiliy Khoruzhick <[email protected]> Signed-off-by: Dmitry Safonov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.