aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2014-01-23Merge tag 'drivers-for-linus' of ↵Linus Torvalds2-51/+138
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM driver updates from Olof Johansson: "Updates of SoC-near drivers and other driver updates that makes more sense to take through our tree. The largest part of this is a conversion of device registration for some renesas shmobile/sh devices over to use resources. This has required coordination with the corresponding arch/sh changes, and we've agreed to merge the arch/sh changes through our tree. Added in this branch is support for Trusted Foundations secure firmware, which is what is used on many of the commercial Nvidia Tegra products that are in the market, including the Nvidia Shield. The code is local to arch/arm at this time since it's uncertain whether it will be shared with arm64 longer-term, if needed we will refactor later. A couple of new RTC drivers used on ARM boards, merged through our tree on request by the RTC maintainer. ... plus a bunch of smaller updates across the board, gpio conversions for davinci, etc" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) watchdog: davinci: rename platform driver to davinci-wdt tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field ...
2014-01-23Merge tag 'cleanup-for-linus' of ↵Linus Torvalds3-190/+170
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2014-01-23Merge git://git.infradead.org/users/eparis/auditLinus Torvalds1-1/+1
Pull audit update from Eric Paris: "Again we stayed pretty well contained inside the audit system. Venturing out was fixing a couple of function prototypes which were inconsistent (didn't hurt anything, but we used the same value as an int, uint, u32, and I think even a long in a couple of places). We also made a couple of minor changes to when a couple of LSMs called the audit system. We hoped to add aarch64 audit support this go round, but it wasn't ready. I'm disappearing on vacation on Thursday. I should have internet access, but it'll be spotty. If anything goes wrong please be sure to cc rgb@redhat.com. He'll make fixing things his top priority" * git://git.infradead.org/users/eparis/audit: (50 commits) audit: whitespace fix in kernel-parameters.txt audit: fix location of __net_initdata for audit_net_ops audit: remove pr_info for every network namespace audit: Modify a set of system calls in audit class definitions audit: Convert int limit uses to u32 audit: Use more current logging style audit: Use hex_byte_pack_upper audit: correct a type mismatch in audit_syscall_exit() audit: reorder AUDIT_TTY_SET arguments audit: rework AUDIT_TTY_SET to only grab spin_lock once audit: remove needless switch in AUDIT_SET audit: use define's for audit version audit: documentation of audit= kernel parameter audit: wait_for_auditd rework for readability audit: update MAINTAINERS audit: log task info on feature change audit: fix incorrect set of audit_sock audit: print error message when fail to create audit socket audit: fix dangling keywords in audit_log_set_loginuid() output audit: log on errors from filter user rules ...
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-13audit: convert all sessionid declaration to unsigned intEric Paris1-1/+1
Right now the sessionid value in the kernel is a combination of u32, int, and unsigned int. Just use unsigned int throughout. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13tty/serial: at91: disable uart timer at start of shutdownMarek Roszko1-12/+10
The uart timer will schedule a tasklet when it fires. It is possible that it can fire inside _shutdown before it is killed in the dma and pdc cleanup routines. This causes a tasklet that exists after the port is shutdown, so when the kernel finally executes it, it panics as the tty port is NULL. This is a somewhat rare condition but its possible if a program keeps on opening/closing the port. It has been observed in particular with systemd boot messages that were causing a kernel panic because of this behavior. Moving the timer deletion to the beginning of the function stops a tasklet from being scheduled unexpectedly. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Cc: stable <stable@vger.kernel.org> # v3.12 [nicolas.ferre@atmel.com: modify commit message, call setup_timer() in any case] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09Merge branch 'qcom/drivers' into next/driversOlof Johansson1-1/+1
* qcom/drivers: tty: serial: Limit msm_serial_hs driver to platforms that use it mmc: msm_sdcc: Limit driver to platforms that use it usb: phy: msm: Move mach dependent code to platform data Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-09tty: serial: Limit msm_serial_hs driver to platforms that use itStephen Boyd1-1/+1
The msm_serial_hs driver uses mach specific dma APIs. This is not compatible with the multi-platform ARM effort. Let's only compile this driver on MSM devices that are prepared to support it; allowing the DT based MSM devices to enter the multi-platform ARM build. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-07serial: 8250: enable UART_BUG_NOMSR for TegraStephen Warren1-0/+4
Tegra chips have 4 or 5 identical UART modules embedded. UARTs C..E have their MODEM-control signals tied off to a static state. However UARTs A and B can optionally route those signals to/from package pins, depending on the exact pinmux configuration. When these signals are not routed to package pins, false interrupts may trigger either temporarily, or permanently, all while not showing up in the IIR; it will read as NO_INT. This will eventually lead to the UART IRQ being disabled due to unhandled interrupts. When this happens, the kernel may print e.g.: irq 68: nobody cared (try booting with the "irqpoll" option) In order to prevent this, enable UART_BUG_NOMSR. This prevents UART_IER_MSI from being enabled, which prevents the false interrupts from triggering. In practice, this is not needed under any of the following conditions: * On Tegra chips after Tegra30, since the HW bug has apparently been fixed. * On UARTs C..E since their MODEM control signals are tied to the correct static state which doesn't trigger the issue. * On UARTs A..B if the MODEM control signals are routed out to package pins, since they will then carry valid signals. However, we ignore these exceptions for now, since they are only relevant if a board actually hooks up more than a 4-wire UART, and no currently supported board does this. If we ever support a board that does, we can refine the algorithm that enables UART_BUG_NOMSR to take those exceptions into account, and/or read a flag from DT/... that indicates that the board has hooked up and pinmux'd more than a 4-wire UART. Reported-by: Olof Johansson <olof@lixom.net> # autotester Cc: <stable@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty/serial: at91: reset rx_ring when port is shutdownMark Deneen1-0/+6
When using RX DMA, the driver won't pass any data to the uart layer until the buffer is flipped. When the port is shutdown, the dma buffers are unmapped, but the head and tail of the ring buffer are not reseted. Since the serial console will keep the port open, this will only present itself when the uart is not shared. To reproduce the issue, with an unpatched driver, run a getty on /dev/ttyS0 with no serial console and exit. Getty will exit, and when the new one returns you will be unable to log in. If you hold down a key long enough to fill the DMA buffer and flip it, you can then log in. Signed-off-by: Mark Deneen <mdeneen@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> [nicolas.ferre@atmel.com: adapt to mainline kernel, handle !DMA case] Cc: <stable@vger.kernel.org> # v3.12 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty/serial: at91: fix race condition in atmel_serial_removeMarek Roszko1-1/+2
The _remove callback could be called when a tasklet is scheduled. tasklet_kill was called inside the function in order to free up any scheduled tasklets. However it was called after uart_remove_one_port which destroys tty references needed in the port for atmel_tasklet_func. Simply putting the tasklet_kill at the start of the function will prevent this conflict. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> Cc: <stable@vger.kernel.org> # v3.12 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty/serial: at91: Handle shutdown more safelyMarek Roszko1-7/+13
Interrupts were being cleaned up late in the shutdown handler, it is possible that an interrupt can occur and schedule a tasklet that runs after the port is cleaned up. There is a null dereference due to this race condition with the following stacktrace: [<c02092b0>] (atmel_tasklet_func+0x514/0x814) from [<c001fd34>] (tasklet_action+0x70/0xa8) [<c001fd34>] (tasklet_action+0x70/0xa8) from [<c001f60c>] (__do_softirq+0x90/0x144) [<c001f60c>] (__do_softirq+0x90/0x144) from [<c001fa18>] (irq_exit+0x40/0x4c) [<c001fa18>] (irq_exit+0x40/0x4c) from [<c000e298>] (handle_IRQ+0x64/0x84) [<c000e298>] (handle_IRQ+0x64/0x84) from [<c000d6c0>] (__irq_svc+0x40/0x50) [<c000d6c0>] (__irq_svc+0x40/0x50) from [<c0208060>] (atmel_rx_dma_release+0x88/0xb8) [<c0208060>] (atmel_rx_dma_release+0x88/0xb8) from [<c0209740>] (atmel_shutdown+0x104/0x160) [<c0209740>] (atmel_shutdown+0x104/0x160) from [<c0205e8c>] (uart_port_shutdown+0x2c/0x38) Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Leilei Zhao <leilei.zhao@atmel.com> Cc: <stable@vger.kernel.org> # v3.12 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07serial: sirf: correct condition for fetching dma buffer into ttyQipan Li1-2/+6
In rx dma-callback it calls tasklet_schedule, if the tasklet be scheduled after all the dma-callback in the rx dma channel, current check condition in the tasklet will not do fetch dma buffer into tty because tx_issued is equal with tx_completed, so as timeout tasklet does. so we check whether we should fetch the whole dma buffer into tty according to the status of transactions in rx dma channel. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07serial: sirf: provide pm entries of uart_opsQipan Li1-3/+11
this patch provides PM entry of uart_ops, then drop clk enable and disable because serial core will do it. the patch also fixes the issue that uart hang in resume caused by not-enabled clock. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07serial: sirf: use PM macro initialize PM functionsQipan Li1-6/+11
use SET_SYSTEM_SLEEP_PM_OPS to initialize suspend/resume functions instead of legacy suspend and resume entries of platform_driver. this will add hibernation support automatically as suspend to disk entries are also set. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07serial: clps711x: Enable driver compilation with COMPILE_TESTAlexander Shiyan2-20/+23
This helps increasing build testing coverage. To do this, read{write}_relaxed() functions was be replaced with simple read{write}() variants. Potential "uninitialized variable" warnings was be fixed if driver compiled without MFD_SYSCON. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07serial: clps711x: Add support for N_IRDA line disciplineAlexander Shiyan1-8/+12
This patch replace custom handling of IrDA feature with N_IRDA line discipline, so IrDA mode can be used with irtty driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty: synclink: avoid sleep_on raceArnd Bergmann3-6/+6
The four variants of the synclink driver use the same code in their open() callback to wait for a port in process of being closed, using interruptible_sleep_on, which is racy and going away soon. Making things worse, these functions hold the BTM while doing so, which means that if we ever enter this code path, we cannot actually continue since the other thread that is in process of closing the port can no longer get the BTM. This addresses both issues by using wait_event_interruptible_tty() instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty/amiserial: avoid interruptible_sleep_onArnd Bergmann1-8/+18
interruptible_sleep_on is generally problematic and we want to get rid of it. In case of TIOCMIWAIT, that race is actually in user space and does not get fixed since we can only detect changes after entering the ioctl handler, but it removes one more caller. This instance can not be trivially replaced with wait_event, so I chose to open-code the wait loop using prepare_to_wait/finish_wait. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07tty: delete non-required instances of include <linux/init.h>Paul Gortmaker15-15/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-07treewide: fix comments and printk msgsMasanari Iida1-1/+1
This patch fixed several typo in printk from various part of kernel source. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-02Merge tag 'davinci-for-v3.14/gpio' of ↵Olof Johansson1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/drivers From Sekhar Nori: DaVinci GPIO driver updates --------------------------- This pull request contains updates to DaVinci GPIO driver and the resultant platform code changes. The updates include DT-conversion and changes to make the driver cross-platform ready. * tag 'davinci-for-v3.14/gpio' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: gpio: davinci: don't create irq_domain in case of unbanked irqs gpio: davinci: use chained_irq_enter/chained_irq_exit API gpio: davinci: add OF support gpio: davinci: remove unused variable intc_irq_num gpio: davinci: convert to use irqdomain support. gpio: introduce GPIO_DAVINCI kconfig option gpio: davinci: get rid of DAVINCI_N_GPIO gpio: davinci: use {readl|writel}_relaxed() instead of __raw_* Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge tag 'renesas-sh-sci3-for-v3.14' of ↵Olof Johansson1-50/+137
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers From Simon Horman: Third Round of Renesas SH SCI Updates for v3.14 * Add Device Tree Support * Remove platform data mapbase and irqs fields * Remove platform data scbrr_algo_id field * tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: serial: sh-sci: Add OF support serial: sh-sci: Add device tree bindings documentation serial: sh-sci: Remove platform data mapbase and irqs fields serial: sh-sci: Remove platform data scbrr_algo_id field Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge branch 'renesas/drivers-sci2' into next/driversOlof Johansson2-168/+154
* renesas/drivers-sci2: serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically serial: sh-sci: Convert to clk_prepare/unprepare serial: sh-sci: Don't enable/disable port from within break timer serial: sh-sci: Fix warnings due to improper casts and printk formats
2014-01-02Merge tag 'renesas-sh-sci2-for-v3.14' of ↵Olof Johansson2-151/+132
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup From Simon Horman: Second Round of Renesas SH SCI updates for v3.14 * Rework baud rate calculation * Compute overrun_bit without using baud rate algo * Remove unused GPIO request code * Move overrun_bit and error_mask fields out of pdata * Support resources passed through platform resources * Don't check IRQ in verify port operation * Set the UPF_FIXED_PORT flag * Remove duplicate interrupt check in verify port op * Simplify baud rate calculation algorithms * Remove baud rate calculation algorithm 5 * Sort headers alphabetically * tag 'renesas-sh-sci2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-29Merge tag 'renesas-sh-sci-for-v3.14' of ↵Olof Johansson1-17/+22
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup From Simon Horman: Renesas SH SCI updates for v3.14 Updates for the SH SCI serial driver * Convert to clk_prepare/unprepare * Fix warnings due to improper casts and printk formats * tag 'renesas-sh-sci-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: serial: sh-sci: Convert to clk_prepare/unprepare serial: sh-sci: Don't enable/disable port from within break timer serial: sh-sci: Fix warnings due to improper casts and printk formats Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26Merge tag 'tegra-for-3.14-dmas-resets-rework' of ↵Olof Johansson1-22/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup From Stephen Warren: ARM: tegra: implement common DMA and resets DT bindings This series converts the Tegra DTs and drivers to use the common/ standard DMA and reset bindings, rather than custom bindings. It also adds complete documentation for the Tegra clock bindings without actually changing any binding definitions. This conversion relies on a few sets of patches in branches from outside the Tegra tree: 1) A patch to add an DMA channel request API which allows deferred probe to be implemented. 2) A patch to implement a common part of the of_xlate function for DMA controllers. 3) Some ASoC patches (which in turn rely on (1) above), which support deferred probe during DMA channel allocation. 4) The Tegra clock driver changes for 3.14. Consequently, this branch is based on a merge of all of those external branches. In turn, this branch is or will be pulled into a few places that either rely on features introduced here, or would otherwise conflict with the patches: a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid conflicts. b) The DRM tree, which introduces new code that relies on the reset controller framework introduced in this branch, and to avoid conflicts. * tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-24Merge 3.13-rc5 into tty-nextGreg Kroah-Hartman4-6/+27
We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-24serial: sh-sci: Add OF supportBastian Hecht1-3/+98
Extend the driver to with support for SCIx device tree bindings. A minimal set of features is supported, additional properties can be added later should the need to describe more device features arise. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove platform data mapbase and irqs fieldsLaurent Pinchart1-26/+34
The fields are not used anymore by board files, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove platform data scbrr_algo_id fieldLaurent Pinchart1-21/+5
The field isn't set by any board, remote it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Rework baud rate calculationLaurent Pinchart1-7/+30
Computing the baud rate register value requires knowledge of the hardware sampling rate. This information is currently encoded in a baud rate calculation algorithm ID passed through platform data. However, it can be derived from the port type directly in most cases. Compute the sampling rate internally in the driver if the baud rate calculation algorithm ID isn't specified, and allow platforms to override the sampling rate through platform data in special cases (this is only required for SCIFA ports on sh7723 and sh7724, the reason needs to be investigated). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Compute overrun_bit without using baud rate algoLaurent Pinchart1-12/+14
The overrun bit index is a property of the hardware. It's currently computed based on a different and unrelated hardware property, the baud rate calculation algorithm. Compute it using hardware identification information only. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove unused GPIO request codeLaurent Pinchart1-67/+0
The driver requests at initialization time GPIOs passed through platform data. No platform makes use of this feature, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Move overrun_bit and error_mask fields out of pdataLaurent Pinchart2-28/+24
None of the fields is ever set by board code, and both of them are set in the driver at probe time. Move them out of struct plat_sci_port to struct sci_port. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Support resources passed through platform resourcesLaurent Pinchart1-16/+49
Memory and IRQ resources are currently passed to the driver through platform data. Support passing them through the standard platform resources mechanism instead. This deprecates platform data resources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Don't check IRQ in verify port operationLaurent Pinchart1-4/+0
The IRQ number can't be modified by the user as the port is fixed. There's no need to check the new IRQ number as it will be ignored by the core. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Set the UPF_FIXED_PORT flagLaurent Pinchart1-1/+1
The base address, IRQ and baud rate generator parent clock rate can't be changed by userspace. Mark the port as fixed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove duplicate interrupt check in verify port opLaurent Pinchart1-1/+1
The driver checks if the interrupt number is greater than nr_irqs and returns an error in that case. The same check is already performed by the caller, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Simplify baud rate calculation algorithmsLaurent Pinchart1-4/+4
Rewrite the baud rate register value calculations in easier to read forms. The computed value isn't modified. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Remove baud rate calculation algorithm 5Laurent Pinchart1-2/+0
The algorithm isn't used, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24serial: sh-sci: Sort headers alphabeticallyLaurent Pinchart1-21/+21
This helps locating duplicates. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-20tty: an overflow of multiplication in drivers/tty/cyclades.cQixue Xiao1-0/+2
there is an overflow in the code : cyz_polling_cycle = (arg * HZ) / 1000, the multiplicator arg comes from user, so it may be an overflow if arg is a big number. And the value of cyc_polling_cycle will be wrong when it is used next time. Reported-by: Qixue Xiao <xiaoqixue_1@163.com> Suggested-by: Yongjian Xu <xuyongjiande@gmail.com> Suggested-by: Yu Chen <chyyuu@gmail.com> Signed-off-by: Qixue Xiao <xiaoqixue_1@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-19serial: Remove old SC26XX driverAlexander Shiyan3-768/+0
New driver for NXP (Philips) UART ICs was introduced in September 2012. Old driver no longer used anywhere, this patch removes it. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-19serial: add support for 200 v3 series Titan cardYegor Yefremov1-0/+4
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-19serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chipJonathan Woithe1-2/+2
Fix the initialisation of older Quatech serial cards which are fitted with the AMCC PCI Matchmaker interface chip. Signed-off-by: Jonathan Woithe (jwoithe@just42.net) Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-18TTY/n_gsm: Removing the wrong tty_unlock/lock() in gsm_dlci_release()Chuansheng Liu1-4/+1
Commit 4d9b109060f690f5c835(tty: Prevent deadlock in n_gsm driver) tried to close all the virtual ports synchronously before closing the phycial ports, so the tty_vhangup() is used. But the tty_unlock/lock() is wrong: tty_release tty_ldisc_release tty_lock_pair(tty, o_tty) < == Here the tty is for physical port tty_ldisc_kill gsmld_close gsm_cleanup_mux gsm_dlci_release tty = tty_port_tty_get(&dlci->port) < == Here the tty(s) are for virtual port They are different ttys, so before tty_vhangup(virtual tty), do not need to call the tty_unlock(virtual tty) at all which causes unbalanced unlock warning. When enabling mutex debugging option, we will hit the below warning also: [ 99.276903] ===================================== [ 99.282172] [ BUG: bad unlock balance detected! ] [ 99.287442] 3.10.20-261976-gaec5ba0 #44 Tainted: G O [ 99.293972] ------------------------------------- [ 99.299240] mmgr/152 is trying to release lock (&tty->legacy_mutex) at: [ 99.306693] [<c1b2dcad>] mutex_unlock+0xd/0x10 [ 99.311669] but there are no more locks to release! [ 99.317131] [ 99.317131] other info that might help us debug this: [ 99.324440] 3 locks held by mmgr/152: [ 99.328542] #0: (&tty->legacy_mutex/1){......}, at: [<c1b30ab0>] tty_lock_nested+0x40/0x90 [ 99.338116] #1: (&tty->ldisc_mutex){......}, at: [<c15dbd02>] tty_ldisc_kill+0x22/0xd0 [ 99.347284] #2: (&gsm->mutex){......}, at: [<c15e3d83>] gsm_cleanup_mux+0x73/0x170 [ 99.356060] [ 99.356060] stack backtrace: [ 99.360932] CPU: 0 PID: 152 Comm: mmgr Tainted: G O 3.10.20-261976-gaec5ba0 #44 [ 99.370086] ef4a4de0 ef4a4de0 ef4c1d98 c1b27b91 ef4c1db8 c1292655 c1dd10f5 c1b2dcad [ 99.378921] c1b2dcad ef4a4de0 ef4a528c ffffffff ef4c1dfc c12930dd 00000246 00000000 [ 99.387754] 00000000 00000000 c15e1926 00000000 00000001 ddfa7530 00000003 c1b2dcad [ 99.396588] Call Trace: [ 99.399326] [<c1b27b91>] dump_stack+0x16/0x18 [ 99.404307] [<c1292655>] print_unlock_imbalance_bug+0xe5/0xf0 [ 99.410840] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.416110] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.421382] [<c12930dd>] lock_release_non_nested+0x1cd/0x210 [ 99.427818] [<c15e1926>] ? gsm_destroy_network+0x36/0x130 [ 99.433964] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.439235] [<c12931a2>] lock_release+0x82/0x1c0 [ 99.444505] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.449776] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.455047] [<c1b2dc2f>] __mutex_unlock_slowpath+0x5f/0xd0 [ 99.461288] [<c1b2dcad>] mutex_unlock+0xd/0x10 [ 99.466365] [<c1b30bb1>] tty_unlock+0x21/0x50 [ 99.471345] [<c15e3dd1>] gsm_cleanup_mux+0xc1/0x170 [ 99.476906] [<c15e44d2>] gsmld_close+0x52/0x90 [ 99.481983] [<c15db905>] tty_ldisc_close.isra.1+0x35/0x50 [ 99.488127] [<c15dbd0c>] tty_ldisc_kill+0x2c/0xd0 [ 99.493494] [<c15dc7af>] tty_ldisc_release+0x2f/0x50 [ 99.499152] [<c15d572c>] tty_release+0x37c/0x4b0 [ 99.504424] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.509695] [<c1b2dcad>] ? mutex_unlock+0xd/0x10 [ 99.514967] [<c1372f6e>] ? eventpoll_release_file+0x7e/0x90 [ 99.521307] [<c1335849>] __fput+0xd9/0x200 [ 99.525996] [<c133597d>] ____fput+0xd/0x10 [ 99.530685] [<c125c731>] task_work_run+0x81/0xb0 [ 99.535957] [<c12019e9>] do_notify_resume+0x49/0x70 [ 99.541520] [<c1b30dc4>] work_notifysig+0x29/0x31 [ 99.546897] ------------[ cut here ]------------ So here we can call tty_vhangup() directly which is for virtual port. Reviewed-by: Chao Bi <chao.bi@intel.com> Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-17tty: xuartps: Properly guard sysrq specific codeSoren Brinkmann1-0/+2
Commit 'tty: xuartps: Implement BREAK detection, add SYSRQ support' (0c0c47bc40a2e358d593b2d7fb93b50027fbfc0c) introduced sysrq support without properly guarding sysrq specific code which results in build errors when sysrq is disabled: DNAME=KBUILD_STR(xilinx_uartps)" -c -o drivers/tty/serial/.tmp_xilinx_uartps.o drivers/tty/serial/xilinx_uartps.c drivers/tty/serial/xilinx_uartps.c: In function 'xuartps_isr': drivers/tty/serial/xilinx_uartps.c:247:5: error: 'struct uart_port' has no member named 'sysrq' drivers/tty/serial/xilinx_uartps.c:247:5: error: 'struct uart_port' has no member named 'sysrq' drivers/tty/serial/xilinx_uartps.c:247:5: error: 'struct uart_port' has no member named 'sysrq' make[3]: *** [drivers/tty/serial/xilinx_uartps.o] Error 1 Reported-by: Masanari Iida <standby24x7@gmail.com> Cc: Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-17n_tty: Fix apparent order of echoed outputPeter Hurley1-1/+6
With block processing of echoed output, observed output order is still required. Push completed echoes and echo commands prior to output. Introduce echo_mark echo buffer index, which tracks completed echo commands; ie., those submitted via commit_echoes but which may not have been committed. Ensure that completed echoes are output prior to subsequent terminal writes in process_echoes(). Fixes newline/prompt output order in cooked mode shell. Cc: <stable@vger.kernel.org> # 3.12.x : 39434ab n_tty: Fix missing newline echo Reported-by: Karl Dahlke <eklhad@comcast.net> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Karl Dahlke <eklhad@comcast.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-17serial: 8250_dw: add new ACPI IDsMika Westerberg1-0/+2
Newer Intel PCHs with LPSS have the same Designware controllers than Haswell but ACPI IDs are different. Add these IDs to the driver list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Powered by cgit, Gruvboxed by Blaster4385.