aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty/serial
AgeCommit message (Collapse)AuthorFilesLines
2023-08-11serial: core: Fix serial core port id, including multiport devicesTony Lindgren2-1/+28
We want to fix the serial core port DEVNAME to use a port id of the hardware specific controller port instance instead of the port->line. For example, the 8250 driver sets up a number of serial8250 ports initially that can be inherited by the hardware specific driver. At that the port->line no longer decribes the port's relation to the serial core controller instance. Let's fix the issue by assigning port->port_id for each serial core controller port instance. Fixes: 7d695d83767c ("serial: core: Fix serial_base_match() after fixing controller port name") Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230811103648.2826-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11serial: 8250: drop lockdep annotation from serial8250_clear_IER()Jiri Slaby (SUSE)1-3/+0
The port lock is not always held when calling serial8250_clear_IER(). When an oops is in progress, the lock is tried to be taken and when it is not, a warning is issued: WARNING: CPU: 0 PID: 1 at drivers/tty/serial/8250/8250_port.c:707 +0x57/0x60 Modules linked in: CPU: 0 PID: 1 Comm: init Not tainted 6.5.0-rc5-1.g225bfb7-default+ #774 00f1be860db663ed29479b8255d3b01ab1135bd3 Hardware name: QEMU Standard PC ... RIP: 0010:serial8250_clear_IER+0x57/0x60 ... Call Trace: <TASK> serial8250_console_write+0x9e/0x4b0 console_flush_all+0x217/0x5f0 ... Therefore, remove the annotation as it doesn't hold for all invocations. The other option would be to make the lockdep test conditional on 'oops_in_progress' or pass 'locked' from serial8250_console_write(). I don't think, that is worth it. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Reported-by: Vlastimil Babka <vbabka@suse.cz> Cc: John Ogness <john.ogness@linutronix.de> Fixes: d0b309a5d3f4 (serial: 8250: synchronize and annotate UART_IER access) Link: https://lore.kernel.org/r/20230811064340.13400-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-09serial: core: Revert port_id useTony Lindgren1-1/+1
Guenter reports boot issues with duplicate sysfs entries for multiport drivers. Let's go back to using port->line for now to fix the regression. With this change, the serial core port device names are not correct for the hardware specific 8250 single port drivers, but that's a cosmetic issue for now. Fixes: d962de6ae51f ("serial: core: Fix serial core port id to not use port->line") Reported-by: Guenter Roeck <groeck7@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230806062052.47737-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04serial: 8250: Fix oops for port->pm on uart_change_pm()Tony Lindgren1-0/+1
Unloading a hardware specific 8250 driver can produce error "Unable to handle kernel paging request at virtual address" about ten seconds after unloading the driver. This happens on uart_hangup() calling uart_change_pm(). Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind") was only a partial fix. If the hardware specific driver has initialized port->pm function, we need to clear port->pm too. Just reinitializing port->ops does not do this. Otherwise serial8250_pm() will call port->pm() instead of serial8250_do_pm(). Fixes: 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04serial: 8250: Reinit port_id when adding back serial8250_isa_devsTony Lindgren1-0/+1
After fixing the serial core port device to use port->port_id instead of port->line, unloading a hardware specific 8250 port driver started producing an error for "sysfs: cannot create duplicate filename". This is happening as we are wrongly initializing port->port_id to zero when adding back serial8250_isa_devs instances, and the serial8250:0.0 sysfs entry may already exist. For serial8250 devices, we typically have multiple devices mapped to a single driver instance. For the serial8250_isa_devs instances, the port->port_id is the same as port->line. Let's fix the issue by re-initializing port_id when adding back the serial8250_isa_devs instances in serial8250_unregister_port(). Fixes: d962de6ae51f ("serial: core: Fix serial core port id to not use port->line") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230804123546.25293-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-04serial: core: Fix kmemleak issue for serial core device removeTony Lindgren1-0/+2
Kmemleak reports issues for serial8250 ports after the hardware specific driver takes over on boot as noted by Tomi. The kerneldoc for device_initialize() says we must call device_put() after calling device_initialize(). We are calling device_put() on the error path, but are missing it from the device remove path. This causes release() to never get called for the devices on remove. Let's add the missing put_device() calls for both serial ctrl and port devices. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://lore.kernel.org/r/20230804090909.51529-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03serial: core: Fix serial_base_match() after fixing controller port nameTony Lindgren1-2/+8
While fixing DEVNAME to be more usable, I broke serial_base_match() as the ctrl and port prefix for device names seemed unnecessary. The prefixes are still needed by serial_base_match() to probe the serial base controller port, and serial tx is now broken. Let's fix the issue by checking against dev->type and drv->name instead of the prefixes that are no longer in the DEVNAME. Fixes: 1ef2c2df1199 ("serial: core: Fix serial core controller port name to show controller id") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202308021529.35b3ad6c-oliver.sang@intel.com Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230803071034.25571-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-01serial: core: Fix serial core controller port name to show controller idTony Lindgren1-12/+20
We are missing the serial core controller id for the serial core port name. Let's fix the issue for sane sysfs output, and to avoid issues addressing serial ports later on. And as we're now showing the controller id, the "ctrl" and "port" prefix for the DEVNAME become useless, we can just drop them. Let's standardize on DEVNAME:0 for controller name, where 0 is the controller id. And DEVNAME:0.0 for port name, where 0.0 are the controller id and port id. This makes the sysfs output nicer, on qemu for example: $ ls /sys/bus/serial-base/devices 00:04:0 serial8250:0 serial8250:0.2 00:04:0.0 serial8250:0.1 serial8250:0.3 Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230725054216.45696-4-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-01serial: core: Fix serial core port id to not use port->lineTony Lindgren2-1/+3
The serial core port id should be serial core controller specific port instance, which is not always the port->line index. For example, 8250 driver maps a number of legacy ports, and when a hardware specific device driver takes over, we typically have one driver instance for each port. Let's instead add port->port_id to keep track serial ports mapped to each serial core controller instance. Currently this is only a cosmetic issue for the serial core port device names. The issue can be noticed looking at /sys/bus/serial-base/devices for example though. Let's fix the issue to avoid port addressing issues later on. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230725054216.45696-3-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-01tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 ↵Sherry Sun1-2/+2
platforms Do not read the data register to clear the error flags for lpuart32 platforms, the additional read may cause the receive FIFO underflow since the DMA has already read the data register. Actually all lpuart32 platforms support write 1 to clear those error bits, let's use this method to better clear the error flags. Fixes: 42b68768e51b ("serial: fsl_lpuart: DMA support for 32-bit variant") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230801022304.24251-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-30Merge tag 'tty-6.5-rc4' of ↵Linus Torvalds4-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small TTY and serial driver fixes for 6.5-rc4 for some reported problems. Included in here is: - TIOCSTI fix for braille readers - documentation fix for minor numbers - MAINTAINERS update for new serial files in -rc1 - minor serial driver fixes for reported problems All of these have been in linux-next with no reported problems" * tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Preserve original value of DLF register tty: serial: sh-sci: Fix sleeping in atomic context serial: sifive: Fix sifive_serial_console_setup() section Documentation: devices.txt: reconcile serial/ucc_uart minor numers MAINTAINERS: Update TTY layer for lists and recently added files tty: n_gsm: fix UAF in gsm_cleanup_mux TIOCSTI: always enable for CAP_SYS_ADMIN
2023-07-25serial: 8250_dw: Preserve original value of DLF registerRuihong Luo1-2/+4
Preserve the original value of the Divisor Latch Fraction (DLF) register. When the DLF register is modified without preservation, it can disrupt the baudrate settings established by firmware or bootloader, leading to data corruption and the generation of unreadable or distorted characters. Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support") Cc: stable <stable@kernel.org> Signed-off-by: Ruihong Luo <colorsu1922@gmail.com> Link: https://lore.kernel.org/stable/20230713004235.35904-1-colorsu1922%40gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230713004235.35904-1-colorsu1922@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25tty: serial: sh-sci: Fix sleeping in atomic contextBiju Das1-1/+1
Fix sleeping in atomic context warning as reported by the Smatch static checker tool by replacing disable_irq->disable_irq_nosync. Reported by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 8749061be196 ("tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support") Cc: stable@kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230704154818.406913-1-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25serial: sifive: Fix sifive_serial_console_setup() sectionSamuel Holland1-1/+1
This function is called indirectly from the platform driver probe function. Even if the driver is built in, it may be probed after free_initmem() due to deferral or unbinding/binding via sysfs. Thus the function cannot be marked as __init. Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART") Cc: stable <stable@kernel.org> Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20230624060159.3401369-1-samuel.holland@sifive.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25Documentation: devices.txt: reconcile serial/ucc_uart minor numersRandy Dunlap1-1/+1
Reconcile devices.txt with serial/ucc_uart.c regarding device number assignments. ucc_uart.c supports 4 ports and uses minor devnums 46-49, so update devices.txt with that info. Then update ucc_uart.c's reference to the location of the devices.txt list in the kernel source tree. Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Timur Tabi <timur@kernel.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: linux-serial@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Link: https://lore.kernel.org/r/20230724063341.28198-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-24serial: qcom-geni: drop bogus runtime pm state updateJohan Hovold1-7/+0
The runtime PM state should not be changed by drivers that do not implement runtime PM even if it happens to work around a bug in PM core. With the wake irq arming now fixed, drop the bogus runtime PM state update which left the device in active state (and could potentially prevent a parent device from suspending). Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") Cc: 5.6+ <stable@vger.kernel.org> # 5.6+ Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-07-03Merge tag 'tty-6.5-rc1' of ↵Linus Torvalds40-368/+2055
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver updates for 6.5-rc1. Included in here are: - tty_audit code cleanups from Jiri - more 8250 cleanups from Ilpo - samsung_tty driver bugfixes - 8250 lock port updates - usual fsl_lpuart driver updates and fixes - other small serial driver fixes and updates, full details in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits) tty_audit: make data of tty_audit_log() const tty_audit: make tty pointers in exposed functions const tty_audit: make icanon a bool tty_audit: invert the condition in tty_audit_log() tty_audit: use kzalloc() in tty_audit_buf_alloc() tty_audit: use TASK_COMM_LEN for task comm Revert "8250: add support for ASIX devices with a FIFO bug" serial: atmel: don't enable IRQs prematurely tty: serial: Add Nuvoton ma35d1 serial driver support tty: serial: fsl_lpuart: add earlycon for imx8ulp platform tty: serial: imx: fix rs485 rx after tx selftests: tty: add selftest for tty timestamp updates tty: tty_io: update timestamps on all device nodes tty: fix hang on tty device with no_room set serial: core: fix -EPROBE_DEFER handling in init serial: 8250_omap: Use force_suspend and resume for system suspend tty: serial: samsung_tty: Use abs() to simplify some code tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE ...
2023-07-03Merge tag 'driver-core-6.5-rc1' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are a small set of changes for 6.5-rc1 for some driver core changes. Included in here are: - device property cleanups to make it easier to write "agnostic" drivers when regards to the firmware layer underneath them (DT vs. ACPI) - debugfs documentation updates - devres additions - sysfs documentation and changes to handle empty directory creation logic better - tiny kernfs optimizations - other tiny changes All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Skip empty folders creation sysfs: Improve readability by following the kernel coding style drivers: fwnode: fix fwnode_irq_get[_byname]() ata: ahci_platform: Make code agnostic to OF/ACPI device property: Implement device_is_compatible() ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h base/node: Use 'property' to identify an access parameter driver core: device.h: add some missing kerneldocs kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR isa: Remove unnecessary checks MAINTAINERS: add entry for auxiliary bus debugfs: Correct the 'debugfs_create_str' docs serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array iio: adc: Use devm_krealloc_array hwmon: pmbus: Use devm_krealloc_array
2023-06-27Merge tag 'docs-arm-move' of git://git.lwn.net/linuxLinus Torvalds1-2/+2
Pull arm documentation move from Jonathan Corbet: "Move the Arm architecture documentation under Documentation/arch/. This brings some order to the documentation directory, declutters the top-level directory, and makes the documentation organization more closely match that of the source" * tag 'docs-arm-move' of git://git.lwn.net/linux: dt-bindings: Update Documentation/arm references docs: update some straggling Documentation/arm references crypto: update some Arm documentation references mips: update a reference to a moved Arm Document arm64: Update Documentation/arm references arm: update in-source documentation references arm: docs: Move Arm documentation to Documentation/arch/
2023-06-21Revert "8250: add support for ASIX devices with a FIFO bug"Jiaqing Zhao3-28/+3
This reverts commit eb26dfe8aa7eeb5a5aa0b7574550125f8aa4c3b3. Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX (0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in 1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always takes precedence over the ASIX entry even since it was initially merged, code in that commit is always unreachable. In my tests, adding the FIFO workaround to pci_netmos_init() makes no difference, and the vendor driver also does not have such workaround. Given that the code was never used for over a decade, it's safe to revert it. Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on their newer AX99100 PCIe serial controllers released on 2016. The FIFO workaround should not be intended for these newer controllers, and it was never implemented in vendor driver. Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug") Cc: stable <stable@kernel.org> Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-21serial: atmel: don't enable IRQs prematurelyDan Carpenter1-2/+2
The atmel_complete_tx_dma() function disables IRQs at the start of the function by calling spin_lock_irqsave(&port->lock, flags); There is no need to disable them a second time using the spin_lock_irq() function and, in fact, doing so is a bug because it will enable IRQs prematurely when we call spin_unlock_irq(). Just use spin_lock/unlock() instead without disabling or enabling IRQs. Fixes: 08f738be88bb ("serial: at91: add tx dma support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Acked-by: Richard Genoud <richard.genoud@gmail.com> Link: https://lore.kernel.org/r/cb7c39a9-c004-4673-92e1-be4e34b85368@moroto.mountain Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19tty: serial: Add Nuvoton ma35d1 serial driver supportJacky Huang3-0/+845
This adds UART and console driver for Nuvoton ma35d1 Soc. It supports full-duplex communication, FIFO control, and hardware flow control. Command line set "console=ttyNVT0,115200", NVT means Nuvoton MA35 UART port. The UART driver probe will create path named "/dev/ttyNVTx". Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230619032330.233796-2-ychuang570808@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19tty: serial: fsl_lpuart: add earlycon for imx8ulp platformSherry Sun1-0/+1
Add earlycon support for imx8ulp platform. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230619080613.16522-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-19tty: serial: imx: fix rs485 rx after txMartin Fuzzey1-5/+13
Since commit 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") RS485 reception no longer works after a transmission. The following scenario shows the problem: 1) Open a port in RS485 mode 2) Receive data from remote (OK) 3) Transmit data to remote (OK) 4) Receive data from remote (Nothing received) In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx(). Since the above commit imx_uart_stop_rx() now sets the loopback bit but imx_uart_start_rx() does not clear it causing the hardware to remain in loopback mode and not receive external data. Fix this by moving the existing loopback disable code to a helper function and calling it from imx_uart_start_rx() too. Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high") Cc: stable@vger.kernel.org Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-16docs: update some straggling Documentation/arm referencesJonathan Corbet1-2/+2
The Arm documentation has moved to Documentation/arch/arm; update the last remaining references to match. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Samuel Holland <samuel@sholland.org> Cc: Thierry Reding <thierry.reding@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # for pwm Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2023-06-15serial: core: fix -EPROBE_DEFER handling in initDan Carpenter1-5/+5
The -EPROBE_DEFER error path in serial_base_device_init() is a bit awkward. Before the call to device_initialize(dev) then we need to manually release all the device resources. And after the call then we need to call put_device() to release the resources. Doing either one wrong will result in a leak or a use after free. So let's wait to return -EPROBE_DEFER until after the call to device_initialize(dev) so that way callers do not have to handle -EPROBE_DEFER as a special case. Now callers can just use put_device() for clean up. The second issue with the -EPROBE_DEFER path is that deferring is not supposed to be a fatal error, but instead it's normal part of the init process and the kernel recovers from it automatically. That means we should not print an error message but just a debug message on this path. Fixes: 539914240a01 ("serial: core: Fix probing serial_base_bus devices") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Message-ID: <18318adb-ab2c-4dcc-9f96-498a13d16b80@moroto.mountain> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-15serial: 8250_omap: Use force_suspend and resume for system suspendTony Lindgren1-5/+15
We should not rely on autosuspend timeout for system suspend. Instead, let's use force_suspend and force_resume functions. Otherwise the serial port controller device may not be idled on suspend. As we are doing a register write on suspend to configure the serial port, we still need to runtime PM resume the port on suspend. While at it, let's switch to pm_runtime_resume_and_get() and check for errors returned. And let's add the missing line break before return to the suspend function while at it. Fixes: 09d8b2bdbc5c ("serial: 8250: omap: Provide ability to enable/disable UART as wakeup source") Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Dhruva Gole <d-gole@ti.com> Message-ID: <20230614045922.4798-1-tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13tty: serial: samsung_tty: Use abs() to simplify some codeChristophe JAILLET1-3/+2
Use abs() instead of hand-writing it. Suggested-by: Walter Harms <wharms@bfs.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <7bd165e82ed3675d4ddee343ab373031e995a126.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when ↵Christophe JAILLET1-0/+8
iterating clk When the best clk is searched, we iterate over all possible clk. If we find a better match, the previous one, if any, needs to be freed. If a better match has already been found, we still need to free the new one, otherwise it leaks. Cc: <stable@vger.kernel.org> # v3.3+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <cf3e0053d2fc7391b2d906a86cd01a5ef15fb9dc.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in ↵Christophe JAILLET1-1/+5
case of error If clk_get_rate() fails, the clk that has just been allocated needs to be freed. Cc: <stable@vger.kernel.org> # v3.3+ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Fixes: 5f5a7a5578c5 ("serial: samsung: switch to clkdev based clock lookup") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Message-ID: <e4baf6039368f52e5a5453982ddcb9a330fc689e.1686412569.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13tty: serial: fsl_lpuart: reduce RX watermark to 0 on LS1028ARobert Hodaszi1-1/+1
LS1028A is using DMA with LPUART. Having RX watermark set to 1, means DMA transactions are started only after receiving the second character. On other platforms with newer LPUART IP, Receiver Idle Empty function initiates the DMA request after the receiver is idling for 4 characters. But this feature is missing on LS1028A, which is causing a 1-character delay in the RX direction on this platform. Set RX watermark to 0 to initiate RX DMA after each character. Link: https://lore.kernel.org/linux-serial/20230607103459.1222426-1-robert.hodaszi@digi.com/ Fixes: 9ad9df844754 ("tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case") Cc: stable <stable@kernel.org> Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Message-ID: <20230609121334.1878626-1-robert.hodaszi@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-13serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLEUwe Kleine-König3-4/+7
The need to handle the FSL variant of 8250 in a special way is also present without console support. So soften the dependency for SERIAL_8250_FSL from SERIAL_8250_CONSOLE to SERIAL_8250. To handle SERIAL_8250=m, the FSL code can be modular, too, thus SERIAL_8250_FSL becomes tristate. Compiling 8250_fsl as a module requires adding a module license so this is added, too. While add it also add a appropriate module description. As then SERIAL_OF_PLATFORM=y + SERIAL_8250_FSL=m is a valid combination (if COMPILE_TEST is enabled on a platform that is neither PPC, ARM nor ARM64), the check in 8250_of.c must be weakened a bit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Message-ID: <20230609133932.786117-3-u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-06serial: core: don't kfree device managed dataDan Carpenter1-6/+2
The put_device() function will call serial_base_ctrl_release() or serial_base_port_release() so these kfrees() are a double free bug. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Message-ID: <ZH7tsTmWY5b/4m+6@moroto> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-06serial: lantiq: add missing interrupt ackBernhard Seibold1-0/+1
Currently, the error interrupt is never acknowledged, so once active it will stay active indefinitely, causing the handler to be called in an infinite loop. Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.") Cc: <stable@vger.kernel.org> Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-06serial: 8250_mtk: Simplify clock sequencing and runtime PMChen-Yu Tsai1-40/+10
The 8250_mtk driver's runtime PM support has some issues: - The bus clock is enabled (through runtime PM callback) later than a register write - runtime PM resume callback directly called in probe, but no pm_runtime_set_active() call is present - UART PM function calls the callbacks directly, _and_ calls runtime PM API - runtime PM callbacks try to do reference counting, adding yet another count between runtime PM and clocks This fragile setup worked in a way, but broke recently with runtime PM support added to the serial core. The system would hang when the UART console was probed and brought up. Tony provided some potential fixes [1][2], though they were still a bit complicated. The 8250_dw driver, which the 8250_mtk driver might have been based on, has a similar structure but simpler runtime PM usage. Simplify clock sequencing and runtime PM support in the 8250_mtk driver. Specifically, the clock is acquired enabled and assumed to be active, unless toggled through runtime PM suspend/resume. Reference counting is removed and left to the runtime PM core. The serial pm function now only calls the runtime PM API. [1] https://lore.kernel.org/linux-serial/20230602092701.GP14287@atomide.com/ [2] https://lore.kernel.org/linux-serial/20230605061511.GW14287@atomide.com/ Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Message-ID: <20230606091747.2031168-1-wenst@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-06serial: st-asc: fix typo in property nameRaphael Gallais-Pou1-1/+1
Changes the property name read in the driver according to the YAML. According to device-tree documentation, property names should not include underscores. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Message-ID: <20230604083558.16661-1-rgallaispou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-05Merge 6.4-rc5 into tty-nextGreg Kroah-Hartman4-25/+27
We need the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-05Merge 6.4-rc5 into driver-core-nextGreg Kroah-Hartman4-25/+27
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-02serial: core: Fix error handling for serial_core_ctrl_device_add()Tony Lindgren1-2/+2
Checking for NULL is incorrect as serial_base_ctrl_add() uses ERR_PTR(). Let's also pass any returned error along, there's no reason to translate all errors to -ENODEV. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230602070007.59268-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-01serial: core: Fix probing serial_base_bus devicesTony Lindgren1-1/+10
If a physical serial port device driver uses arch_initcall() we fail to probe the serial_base_bus devices and the serial port tx fails. This is because as serial_base_bus uses module_initcall(). Let's fix the issue by changing serial_base_bus to use arch_initcall(). Let's also return an error if a driver attempts to call uart_add_one_port() too early. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/linux-serial/20230601132012.GB14287@atomide.com/T/#m6a40440fc04d551d27b147da8602e065c982a115 Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230601141445.11321-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-01serial: core: Don't drop port_mutex in serial_core_remove_one_portSteven Price1-3/+1
Commit 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") required the caller to hold port_mutex rather than taking it locally. However the mutex_unlock() call wasn't removed causing the mutex to be dropped unexpectly. Remove the call to mutex_unlock() (and fix up the early return) to restore correct behaviour. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230601105548.29965-1-steven.price@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-31serial: core: Start managing serial controllers to enable runtime PMTony Lindgren8-22/+594
We want to enable runtime PM for serial port device drivers in a generic way. To do this, we want to have the serial core layer manage the registered physical serial controller devices. To manage serial controllers, let's set up a struct bus and struct device for the serial core controller as suggested by Greg and Jiri. The serial core controller devices are children of the physical serial port device. The serial core controller device is needed to support multiple different kind of ports connected to single physical serial port device. Let's also set up a struct device for the serial core port. The serial core port instances are children of the serial core controller device. With the serial core port device we can now flush pending TX on the runtime PM resume as suggested by Johan. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Suggested-by: Jiri Slaby <jirislaby@kernel.org> Suggested-by: Johan Hovold <johan@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230525113034.46880-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-31serial: 8250: omap: convert to modern PM opsArnd Bergmann1-12/+5
The new uart_write() function is only called from suspend/resume code, causing a build warning when those are left out: drivers/tty/serial/8250/8250_omap.c:169:13: error: 'uart_write' defined but not used [-Werror=unused-function] Remove the #ifdefs and use the modern pm_ops/pm_sleep_ops and their wrappers to let the compiler see where it's used but still drop the dead code. Fixes: 398cecc24846 ("serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230517202012.634386-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-31serial: 8250: omap: Move uart_write() inside PM sectionGeert Uytterhoeven1-5/+5
If CONFIG_PM is not set (e.g. m68k/allmodconfig): drivers/tty/serial/8250/8250_omap.c:169:13: error: ‘uart_write’ defined but not used [-Werror=unused-function] 169 | static void uart_write(struct omap8250_priv *priv, u32 reg, u32 val) | ^~~~~~~~~~ Fix tis by moving uart_write() inside the existing section protected by #ifdef CONFIG_PM. Reported-by: noreply@ellerman.id.au Link: http://kisskb.ellerman.id.au/kisskb/buildresult/14925095/ Fixes: 398cecc24846e867 ("serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230515065706.1723477-1-geert@linux-m68k.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-31serial: 8250-fsl: Expand description of the MPC83xx UART's misbehaviourUwe Kleine-König1-1/+13
After working quite a bit on erratic behaviour of the MPC83xx UART I (think I) understood the problem. Expand the description accoringly to conserve the knowledge for the future. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230524122754.481816-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_arrayJames Clark1-0/+5
Now that devm_krealloc_array is available, add a comment justifying not changing this occurrence to avoid any future auto fixups. Link: https://lore.kernel.org/all/20230318173402.20a4f60d@jic23-huawei/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: James Clark <james.clark@arm.com> Link: https://lore.kernel.org/r/20230509094942.396150-5-james.clark@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30serial: cpm_uart: Fix a COMPILE_TEST dependencyHerve Codina2-3/+1
In a COMPILE_TEST configuration, the cpm_uart driver uses symbols from the cpm_uart_cpm2.c file. This file is compiled only when CONFIG_CPM2 is set. Without this dependency, the linker fails with some missing symbols for COMPILE_TEST configuration that needs SERIAL_CPM without enabling CPM2. This lead to: depends on CPM2 || CPM1 || (PPC32 && CPM2 && COMPILE_TEST) This dependency does not make sense anymore and can be simplified removing all the COMPILE_TEST part. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305160221.9XgweObz-lkp@intel.com/ Fixes: e3e7b13bffae ("serial: allow COMPILE_TEST for some drivers") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230523085902.75837-3-herve.codina@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of ↵Sherry Sun1-21/+23
UARTCTRL_SBK LPUART IP now has two known bugs, one is that CTS has higher priority than the break signal, which causes the break signal sending through UARTCTRL_SBK may impacted by the CTS input if the HW flow control is enabled. It exists on all platforms we support in this driver. So we add a workaround patch for this issue: commit c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal"). Another IP bug is i.MX8QM LPUART may have an additional break character being sent after SBK was cleared. It may need to add some delay between clearing SBK and re-enabling CTS to ensure that the SBK latch are completely cleared. But we found that during the delay period before CTS is enabled, there is still a risk that Bluetooth data in TX FIFO may be sent out during this period because of break off and CTS disabled(even if BT sets CTS line deasserted, data is still sent to BT). Due to this risk, we have to drop the CTS-disabling workaround for SBK bugs, use TXINV seems to be a better way to replace SBK feature and avoid above risk. Also need to disable the transmitter to prevent any data from being sent out during break, then invert the TX line to send break. Then disable the TXINV when turn off break and re-enable transmitter. Fixes: c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30serial: 8250_tegra: Fix an error handling path in tegra_uart_probe()Christophe JAILLET1-1/+3
If an error occurs after reset_control_deassert(), it must be re-asserted, as already done in the .remove() function. Fixes: c6825c6395b7 ("serial: 8250_tegra: Create Tegra specific 8250 driver") Cc: stable <stable@kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f8130f35339cc80edc6b9aac4bb2a60b60a226bf.1684063511.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30serial: Indicate fintek option may also be required for RS232 supportJames Hilliard1-4/+6
The current config comment for SERIAL_8250_FINTEK implies that this option is only needed when one wants to support RS485. As it turns out we also need to enable this option for RS232 support to function correctly on some variants. For example for variants such as the F71869AD attempting to use multiple RS232 ports simultaneously without this option enabled can result in data corruption. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20230521075046.3539376-1-james.hilliard1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Powered by cgit, Gruvboxed by Blaster4385.