| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The serdev tty-port controller driver should reset the tty-port client
operations also on deregistration to avoid a NULL-pointer dereference in
case the port is later re-registered as a normal tty device.
Note that this can only happen with tty drivers such as 8250 which have
statically allocated port structures that can end up being reused and
where a later registration would not register a serdev controller (e.g.
due to registration errors or if the devicetree has been changed in
between).
Specifically, this can be an issue for any statically defined ports that
would be registered by 8250 core when an 8250 driver is being unbound.
Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver")
Cc: stable <[email protected]> # 4.11
Reported-by: Loic Poulain <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The tty struct holds a pointer to the driver's tty operations so drop
the unnecessary driver dereference when calling tiocmget and tiocmset.
Note that this also makes the calls match the preceding sanity checks as
expected.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/staging driver updates from Greg KH:
"Here is the big tty/serial driver update for 4.16-rc1.
The usual number of various serial driver fixes and updates to try to
get them to work with crazy hardware configurations (seriously, how
many different ways are hardware engineers going to come up with to
hook up a simple UART?)
There is also some serdev bugfixes and updates, as well as a
smattering of other small fixes in here.
All have been in the linux-next tree for a while, with no reported
issues"
* tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: exar: Relocate sleep wake-up handling
tty: fix data race between tty_init_dev and flush of buf
serial: imx: fix endless loop during suspend
serial: core: mark port as initialized after successful IRQ change
serdev: only match serdev devices
serdev: do not generate modaliases for controllers
serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction
serial: 8250_dw: Revert "Improve clock rate setting"
MAINTAINERS: Add myself as designated reviewer for 8250_dw
gpio: serial: max310x: Support open-drain configuration for GPIOs
serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers
serial: 8250_ingenic: Parse earlycon options
serial: 8250_ingenic: Add support for the JZ4770 SoC
serial: core: Make uart_parse_options take const char* argument
serial: 8250_of: fix return code when probe function fails to get reset
serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS
serial: 8250_uniphier: fix error return code in uniphier_uart_probe()
tty: n_gsm: Allow ADM response in addition to UA for control dlci
tty: omap-serial: Fix initial on-boot RTS GPIO level
tty: serial: jsm: Add one check against NULL pointer dereference
...
|
|
Adds serdev_device_set_parity() and an implementation for ttyport.
The interface uses an enum with the values SERIAL_PARITY_NONE,
SERIAL_PARITY_EVEN and SERIAL_PARITY_ODD.
Signed-off-by: Ulrich Hecht <[email protected]>
Reviewed-by: Sebastian Reichel <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
Serdev does not use the file abstraction and specifically there will
never be anyone polling a file descriptor for POLLOUT events.
Just use plain wake_up_interruptible() in the write_wakeup callback and
document why it's there.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We want the serial/tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Serdev currently does not support hangups so make sure to set CLOCAL to
prevent loss of carrier from triggering one.
Note however that not all tty drivers honour CLOCAL.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Release the tty lock once tty-driver open returns to make it clear that
it does not protect neither tty->termios or the serport flags.
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Make sure to hold the tty lock as required when calling tty-driver
close() (e.g. to avoid racing with hangup()).
Note that the serport active flag is currently set under the lock at
controller open, but really isn't protected by it.
Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices")
Signed-off-by: Johan Hovold <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Make sure to use a properly refcounted tty_struct in write_wake up to
avoid dereferencing a NULL-pointer when a port is being hung up.
Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver")
Cc: stable <[email protected]> # 4.11
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The receive_buf tty-port callback should return the number of bytes
accepted and must specifically never return a negative errno (or a value
larger than the buffer size) to the tty layer.
A serdev driver not providing a receive_buf callback would currently
cause the flush_to_ldisc() worker to spin in a tight loop when the tty
buffer pointers are incremented with -EINVAL (-22) after data has been
received.
A serdev driver occasionally returning a negative errno (or a too large
byte count) could cause information leaks or crashes when accessing
memory outside the tty buffers in consecutive callbacks.
Fixes: cd6484e1830b ("serdev: Introduce new bus for serial attached devices")
Cc: stable <[email protected]> # 4.11
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that the SPDX tag is in all tty files, that identifies the license
in a specific and legally-defined manner. So the extra GPL text wording
can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Rob Herring <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/tty files files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Jiri Slaby <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Ray Jui <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: [email protected]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Joachim Eastwood <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Tobias Klauser <[email protected]>
Cc: Russell King <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Richard Genoud <[email protected]>
Cc: Alexander Shiyan <[email protected]>
Cc: Baruch Siach <[email protected]>
Cc: "Maciej W. Rozycki" <[email protected]>
Cc: "Uwe Kleine-König" <[email protected]>
Cc: Pat Gefre <[email protected]>
Cc: "Guilherme G. Piccoli" <[email protected]>
Cc: Jason Wessel <[email protected]>
Cc: Vladimir Zapolskiy <[email protected]>
Cc: Sylvain Lemieux <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: David Brown <[email protected]>
Cc: "Andreas Färber" <[email protected]>
Cc: Kevin Cernekee <[email protected]>
Cc: Laxman Dewangan <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Barry Song <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Peter Korsgaard <[email protected]>
Cc: Timur Tabi <[email protected]>
Cc: Tony Prisk <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: "Sören Brinkmann" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Kate Stewart <[email protected]>
Cc: Philippe Ombredanne <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add missing error handling for tty-driver open() which may fail (e.g. if
resource allocation fails or if a port is being disconnected).
Note that close() must be called also in case of failed open() and that
the operation sanity check is amended to catch buggy drivers.
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The tty-driver open routine is mandatory, but the serdev
tty-port-controller implementation did not treat it as such and would
instead fall back to calling tty_port_open() directly.
Signed-off-by: Johan Hovold <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the tty fixes/changes here to handle future work.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a new interface for registering a serdev controller and clients, and
a helper function to deregister serdev devices (or a tty device) that
were previously registered using the new interface.
Once every driver currently using the tty_port_register_device() helpers
have been vetted and converted to use the new serdev registration
interface (at least for deregistration), we can move serdev registration
to the current helpers and get rid of the serdev-specific functions.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The port client data must be set when registering the serdev controller
or client deregistration will fail (and the serdev devices are left
registered and allocated) if the port was never opened in between.
Make sure to clear the port client data on any probe errors to avoid a
use-after-free when the client is later deregistered unconditionally
(e.g. in a tty-port deregistration helper).
Also move port client operation initialisation to registration. Note
that the client ops must be restored on failed probe.
Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver")
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Instead of returning the requested baudrate, we better return the
actual one because it isn't always the same.
Signed-off-by: Stefan Wahren <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add method for getting and setting tiocm.
Acked-by: Pavel Machek <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
Add method, which waits until the transmission buffer has been sent.
Note, that the change in ttyport_write_wakeup is related, since
tty_wait_until_sent will hang without that change.
Acked-by: Rob Herring <[email protected]>
Acked-by: Pavel Machek <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
My static checker complains that we don't have any error handling here.
It's simple enough to add it.
Fixes: bed35c6dfa6a ("serdev: add a tty port controller driver")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a serdev controller driver for tty ports.
The controller is registered with serdev when tty ports are registered
with the TTY core. As the TTY core is built-in only, this has the side
effect of making serdev built-in as well.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-By: Sebastian Reichel <[email protected]>
Tested-By: Sebastian Reichel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|