aboutsummaryrefslogtreecommitdiff
path: root/drivers/thermal/qcom
AgeCommit message (Collapse)AuthorFilesLines
2023-01-06thermal/drivers/qcom: Fix lock inversionJohan Hovold1-0/+5
The thermal-zone-device lock is held by core when setting trip points and the driver takes its chip lock in the corresponding callback. Fetching the thermal trip points using thermal_zone_get_trip() also involves taking the thermal-zone-device lock, which means that the chip lock can not be held when doing so. Drop the chip lock temporarily during probe to avoid the lock inversion that was detected by lockdep: ====================================================== WARNING: possible circular locking dependency detected 6.1.0-next-20221213 #122 Not tainted ------------------------------------------------------ systemd-udevd/264 is trying to acquire lock: ffff741e444a0920 (&chip->lock){+.+.}-{3:3}, at: qpnp_tm_get_temp+0xb4/0x1b0 [qcom_spmi_temp_alarm] but task is already holding lock: ffff741e44341618 (&tz->lock){+.+.}-{3:3}, at: thermal_zone_device_update+0x2c/0x70 which lock already depends on the new lock. Fixes: 78c3e2429be8 ("thermal/drivers/qcom: Use generic thermal_zone_get_trip() function") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221214131617.2447-5-johan+linaro@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2023-01-06thermal/drivers/qcom: Fix set_trip_temp() deadlockJohan Hovold1-1/+1
The set_trip_temp() callback is used when changing the trip temperature through sysfs. As it is called with the thermal-zone-device lock held it must not use thermal_zone_get_trip() directly or it will deadlock. Fixes: 78c3e2429be8 ("thermal/drivers/qcom: Use generic thermal_zone_get_trip() function") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221214131617.2447-2-johan+linaro@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2023-01-06thermal/drivers/qcom: Use generic thermal_zone_get_trip() functionDaniel Lezcano1-22/+17
The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Amit Kucheria <amitk@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20221003092602.1323944-14-daniel.lezcano@linaro.org
2022-12-14thermal/drivers/qcom/lmh: Fix irq handler return valueBjorn Andersson1-1/+1
After enough invocations the LMh irq is eventually reported as bad, because the handler doesn't return IRQ_HANDLED, fix this. Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220316180322.88132-1-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/qcom: Demote error log of thermal zone register to debugManivannan Sadhasivam1-1/+1
devm_thermal_of_zone_register() can fail with -ENODEV if thermal zone for the channel is not represented in DT. This is perfectly fine since not all sensors needs to be used for thermal zones but only a few in real world. So demote the error log to debug to avoid spamming users. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20221029052933.32421-1-manivannan.sadhasivam@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2Luca Weiss1-1/+2
On gen2 chips the stage2 threshold is not 140 degC but 125 degC. Make the warning message clearer by using this variable and also by including the temperature that was checked for. Fixes: aa92b3310c55 ("thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals") Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Amit Kucheria <amitk@kernel.org> Link: https://lore.kernel.org/r/20221020145237.942146-1-luca.weiss@fairphone.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal: qcom-spmi-adc-tm5: suppress probe-deferral error messageJohan Hovold1-4/+2
Drivers should not be logging errors on probe deferral. Switch to using dev_err_probe() to log failures when parsing the devicetree to avoid errors like: qcom-spmi-adc-tm5 c440000.spmi:pmic@0:adc-tm@3400: get dt data failed: -517 when a channel is not yet available. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20221102152630.696-1-johan+linaro@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/qcom/tsens: Rework debugfs file structureChristian Marangi1-10/+3
The current tsens debugfs structure is composed by: - a tsens dir in debugfs with a version file - a directory for each tsens istance with sensors file to dump all the sensors value. This works on the assumption that we have the same version for each istance but this assumption seems fragile and with more than one tsens istance results in the version file not tracking each of them. A better approach is to just create a subdirectory for each tsens istance and put there version and sensors debugfs file. Using this new implementation results in less code since debugfs entry are created only on successful tsens probe. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/qcom/tsens: Fix wrong version id dbg_version_showChristian Marangi1-1/+1
For VER_0 the version was incorrectly reported as 0.1.0. Fix that and correctly report the major version for this old tsens revision. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20221022125657.22530-3-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/qcom/tsens: Init debugfs only with successful probeChristian Marangi1-3/+5
Calibrate and tsens_register can fail or PROBE_DEFER. This will cause a double or a wrong init of the debugfs information. Init debugfs only with successful probe fixing warning about directory already present. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Link: https://lore.kernel.org/r/20221022125657.22530-2-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-12-14thermal/drivers/tsens: Add IPQ8074 supportRobert Marko3-1/+21
Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP it only has one IRQ, that is used for up/low as well as critical. It also does not support negative trip temperatures. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-12-14thermal/drivers/tsens: Allow configuring min and max tripsRobert Marko6-2/+14
IPQ8074 and IPQ6018 dont support negative trip temperatures and support up to 204 degrees C as the max trip temperature. So, instead of always setting the -40 as min and 120 degrees C as max allow it to be configured as part of the features. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-12-14thermal/drivers/tsens: Add support for combined interruptRobert Marko6-6/+38
Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for signaling both up/low and critical trips. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818220245.338396-2-robimarko@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-10-10Merge tag 'thermal-6.1-rc1-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more thermal control updates from Rafael Wysocki: "These fix assorted issues in the thermal core and ARM thermal drivers. Specifics: - Use platform data to get the sensor ID instead of parsing the device in imx_sc thermal driver and remove the dedicated OF function from the core code (Daniel Lezcano). - Fix Kconfig dependency for the QCom tsens thermal driver (Jonathan Cameron). - Add missing const annotation to the RCar ops thermal driver (Lad Prabhakar). - Drop duplicate parameter check from thermal_zone_device_register_with_trips() (Lad Prabhakar). - Fix NULL pointer dereference in trip_point_temp_store() by making it check if the ->set_trip_temp() operation is present (Lad Prabhakar). - Fix the MSM8939 fourth sensor hardware ID in the QCom tsens thermal driver (Vincent Knecht)" * tag 'thermal-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id thermal/core: Add a check before calling set_trip_temp() thermal/core: Drop valid pointer check for type thermal/drivers/rcar_thermal: Constify static thermal_zone_device_ops thermal/drivers/qcom: Drop false build dependency of all QCOM drivers on QCOM_TSENS thermal/of: Remove the thermal_zone_of_get_sensor_id() function thermal/drivers/imx_sc: Rely on the platform data to get the resource id
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-10-04thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_idVincent Knecht1-1/+1
Reading temperature from this sensor fails with 'Invalid argument'. Looking at old vendor dts [1], its hw_id should be 3 instead of 4. Change this hw_id accordingly. [1] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/master/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L511 Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939") Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20220811105014.7194-1-vincent.knecht@mailoo.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-09-24nvmem: prefix all symbols with NVMEM_Rafał Miłecki1-1/+1
This unifies all NVMEM symbols. They follow one style now. Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-17thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err()Jiapeng Chong1-3/+1
The print function dev_err() is redundant because platform_get_irq() already prints an error. ./drivers/thermal/qcom/qcom-spmi-adc-tm5.c:1029:2-9: line 1029 is redundant because platform_get_irq() already prints an error. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1846 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220809034346.128607-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-08-17thermal/drivers/qcom: Switch to new of APIDaniel Lezcano3-24/+23
The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220804224349.1926752-12-daniel.lezcano@linexp.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-08-15thermal: qcom: qcom-spmi-adc-tm5: convert to IIO fwnode APINuno Sá1-1/+2
Make usage of the new firmware agnostic API 'devm_of_iio_channel_get_by_name()' to get the IIO channel. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20220715122903.332535-7-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-28thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensorsDmitry Baryshkov1-0/+5
Register thermal zones as hwmon sensors to let userspace read temperatures using standard hwmon interface. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20220719054940.755907-2-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-28thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensorsDmitry Baryshkov1-0/+5
Register thermal zones as hwmon sensors to let userspace read temperatures using standard hwmon interface. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20220719054940.755907-1-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-28thermal/drivers/qcom: Remove get_trend functionDaniel Lezcano2-14/+0
There is a get_trend function which is a wrapper to call a private get_trend function. However, this private get_trend function is not assigned anywhere. Remove this dead code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Amit Kucheria <amitk@kernel.org> Link: https://lore.kernel.org/r/20220616202537.303655-1-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/qcom/lmh: Add sc8180x compatibleBjorn Andersson1-0/+1
The LMh instances in the Qualcomm SC8180X platform looks to behave similar to those in SM8150, add additional compatibles to allow platform specific behavior to be added if needed. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220502164504.3972938-1-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/tsens: Add compat string for the qcom,msm8960Dmitry Baryshkov1-0/+3
On apq8064 (msm8960) platforms the tsens device is created manually by the gcc driver. Prepare the tsens driver for the qcom,msm8960-tsens device instantiated from the device tree. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220406002648.393486-3-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/qcom: Add support for PMIC5 Gen2 ADCTMJishnu Prakash1-7/+397
Add support for PMIC5 Gen2 ADC_TM, used on PMIC7 chips. It is a close counterpart of PMIC7 ADC and has the same functionality as PMIC5 ADC_TM, for threshold monitoring and interrupt generation. It is present on PMK8350 alone, like PMIC7 ADC and can be used to monitor up to 8 ADC channels, from any of the PMIC7 PMICs having ADC on a target, through PBS(Programmable Boot Sequence). Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/1648991869-20899-5-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-05-19thermal/drivers/qcom: Add support for multiple generations of devicesJishnu Prakash1-31/+51
Refactor code to support multiple generations of ADC_TM devices by defining gen number, irq name and disable, configure, isr and init APIs in the individual data structs. Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1648991869-20899-4-git-send-email-quic_jprakash@quicinc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-08thermal/drivers/qcom/lmh: Add support for sm8150Thara Gopinath1-27/+35
Add compatible to support LMh for sm8150 SoC. sm8150 does not require explicit enabling for various LMh subsystems. Add a variable indicating the same as match data which is set for sdm845. Execute the piece of code enabling various LMh subsystems only if enable algorithm match data is present. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220106173138.411097-2-thara.gopinath@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-08thermal/drivers/tsens: register thermal zones as hwmon sensorsDmitry Baryshkov1-0/+5
Register thermal zones as hwmon sensors to let userspace read CPU temperatures using standard hwmon interface. Acked-by: Amit Kucheria <amitk@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20220129180750.1882310-1-dmitry.baryshkov@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-16thermal/drivers/tsens: Add timeout to get_temp_tsens_validAnsuel Smith1-15/+14
The function can loop and lock the system if for whatever reason the bit for the target sensor is NEVER valid. This is the case if a sensor is disabled by the factory and the valid bit is never reported as actually valid. Add a timeout check and exit if a timeout occurs. As this is a very rare condition, handle the timeout only if the first read fails. While at it also rework the function to improve readability and convert to poll_timeout generic macro. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007172859.583-1-ansuelsmth@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-16thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCMJackie Liu1-1/+1
Without QCOM_SCM, build failed, avoid like below: aarch64-linux-gnu-ld: Unexpected GOT/PLT entries detected! aarch64-linux-gnu-ld: Unexpected run-time procedure linkages detected! aarch64-linux-gnu-ld: drivers/thermal/qcom/lmh.o: in function `lmh_probe': /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:141: undefined reference to `qcom_scm_lmh_dcvsh_available' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:144: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:149: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:154: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:159: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:166: undefined reference to `qcom_scm_lmh_profile_change' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:173: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:180: undefined reference to `qcom_scm_lmh_dcvsh' aarch64-linux-gnu-ld: /data/arm/workspace/kernel-build/linux/build/../drivers/thermal/qcom/lmh.c:187: undefined reference to `qcom_scm_lmh_dcvsh' make[1]: *** [/data/arm/workspace/kernel-build/linux/Makefile:1183: vmlinux] Error 1 make[1]: Leaving directory '/data/arm/workspace/kernel-build/linux/build' make: *** [Makefile:219: __sub-make] Error 2 make: Leaving directory '/data/arm/workspace/kernel-build/linux' Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Link: https://lore.kernel.org/r/20211009015853.3509559-1-liu.yun@linux.dev Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-10-15thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variantBjorn Andersson1-1/+40
The variant of the ADC Thermal Monitor block found in e.g. PM8998 is "HC", add support for this variant to the ADC TM5 driver in order to support using VADC channels as thermal_zones on SDM845 et al. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211005032531.2251928-3-bjorn.andersson@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-09-21thermal/drivers/tsens: Fix wrong check for tzd in irq handlersAnsuel Smith1-2/+2
Some devices can have some thermal sensors disabled from the factory. The current two irq handler functions check all the sensor by default and the check if the sensor was actually registered is wrong. The tzd is actually never set if the registration fails hence the IS_ERR check is wrong. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210907212543.20220-1-ansuelsmth@gmail.com
2021-09-09thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not usedMatthias Kaehlcke1-0/+6
adc_tm5_register_tzd() registers the thermal zone sensors for all channels of the thermal monitor. If the registration of one channel fails the function skips the processing of the remaining channels and returns an error, which results in _probe() being aborted. One of the reasons the registration could fail is that none of the thermal zones is using the channel/sensor, which hardly is a critical error (if it is an error at all). If this case is detected emit a warning and continue with processing the remaining channels. Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reported-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210823134726.1.I1dd23ddf77e5b3568625d80d6827653af071ce19@changeid
2021-08-18thermal/drivers/qcom: Add support for LMh driverThara Gopinath3-0/+243
Driver enabling various pieces of Limits Management Hardware(LMh) for cpu cluster0 and cpu cluster1 namely kick starting monitoring of temperature, current, battery current violations, enabling reliability algorithm and setting up various temperature limits. The following has been explained in the cover letter. I am including this here so that this remains in the commit message as well. LMh is a hardware infrastructure on some Qualcomm SoCs that can enforce temperature and current limits as programmed by software for certain IPs like CPU. On many newer LMh is configured by firmware/TZ and no programming is needed from the kernel side. But on certain SoCs like sdm845 the firmware does not do a complete programming of the h/w. On such soc's kernel software has to explicitly set up the temperature limits and turn on various monitoring and enforcing algorithms on the hardware. Tested-by: Steev Klimaszewski <steev@kali.org> # Lenovo Yoga C630 Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210809191605.3742979-3-thara.gopinath@linaro.org
2021-05-27thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()Yang Yingliang1-1/+1
Return -EINVAL when args is invalid instead of 'ret' which is set to zero by a previous successful call to a function. Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210527092640.2070555-1-yangyingliang@huawei.com
2021-04-22thermal/drivers/tsens: Add support for ipq8064-tsensAnsuel Smith1-0/+3
Add support for tsens present in ipq806x SoCs based on generic msm8960 tsens driver. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-9-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Drop unused define for msm8960Ansuel Smith1-23/+1
Drop unused define for msm8960 replaced by generic api and reg_field. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-8-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Replace custom 8960 apis with generic apisAnsuel Smith1-41/+15
Rework calibrate function to use common function. Derive the offset from a missing hardcoded slope table and the data from the nvmem calib efuses. Drop custom get_temp function and use generic api. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-7-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Fix bug in sensor enable for msm8960Ansuel Smith1-3/+20
Device based on tsens VER_0 contains a hardware bug that results in some problem with sensor enablement. Sensor id 6-11 can't be enabled selectively and all of them must be enabled in one step. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-6-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Use init_common for msm8960Ansuel Smith1-51/+1
Use init_common and drop custom init for msm8960. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-5-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Add VER_0 tsens versionAnsuel Smith3-30/+133
VER_0 is used to describe device based on tsens version before v0.1. These device are devices based on msm8960 for example apq8064 or ipq806x. Add support for VER_0 in tsens.c and set the right tsens feat in tsens-8960.c file. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-4-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Convert msm8960 to reg_fieldAnsuel Smith1-2/+71
Convert msm9860 driver to reg_field to use the init_common function. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-3-ansuelsmth@gmail.com
2021-04-22thermal/drivers/tsens: Don't hardcode sensor slopeAnsuel Smith1-1/+2
Function compute_intercept_slope hardcode the sensor slope to SLOPE_DEFAULT. Change this and use the default value only if a slope is not defined. This is needed for tsens VER_0 that has a hardcoded slope table. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210420183343.2272-2-ansuelsmth@gmail.com
2021-04-20thermal/drivers/qcom/tsens-v0_1: Add support for MDM9607Konrad Dybcio3-2/+101
MDM9607 TSENS IP is very similar to the one of MSM8916, with minor adjustments to various tuning values. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210319220802.198215-2-konrad.dybcio@somainline.org
2021-04-15thermal/drivers/tsens: Fix missing put_device errorGuangqing Zhu1-2/+4
Fixes coccicheck error: drivers/thermal/qcom/tsens.c:759:4-10: ERROR: missing put_device; call of_find_device_by_node on line 715, but without a corresponding object release within this function. Fixes: a7ff82976122 ("drivers: thermal: tsens: Merge tsens-common.c into tsens.c") Signed-off-by: Guangqing Zhu <zhuguangqing83@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210404125431.12208-1-zhuguangqing83@gmail.com
2021-04-15thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC ↵David Collins1-30/+61
peripherals Add support for TEMP_ALARM GEN2 PMIC peripherals with digital major revision 1. This revision utilizes a different temperature threshold mapping than earlier revisions. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/69c90a004b3f5b7ae282f5ec5ca2920a48f23e02.1596040416.git.gurus@codeaurora.org
2021-03-17thermal/drivers/qcom/tsens_v1: Enable sensor 3 on MSM8976Konrad Dybcio1-2/+2
The sensor *is* in fact used and does report temperature. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210225213119.116550-1-konrad.dybcio@somainline.org
2021-02-16thermal: qcom: Fix comparison with uninitialized variable channels_availableColin Ian King1-7/+7
Currently the check of chip->channels[i].channel is against an the uninitialized variable channels_available. I believe the variable channels_available needs to be fetched first by the call to adc_tm5_read before the channels check. Fix the issue swapping the order of the channels check loop with the call to adc_tm5_read. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210216151626.162996-1-colin.king@canonical.com
2021-02-15thermal: qcom: add support for adc-tm5 PMIC thermal monitorDmitry Baryshkov3-0/+635
Add support for Thermal Monitoring part of PMIC5. This part is closely coupled with ADC, using it's channels directly. ADC-TM support generating interrupts on ADC value crossing low or high voltage bounds, which is used to support thermal trip points. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205000118.493610-3-dmitry.baryshkov@linaro.org
Powered by cgit, Gruvboxed by Blaster4385.