aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+1
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-16Merge tag 'hyperv-next-signed-20220114' of ↵Linus Torvalds1-22/+32
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - More patches for Hyper-V isolation VM support (Tianyu Lan) - Bug fixes and clean-up patches from various people * tag 'hyperv-next-signed-20220114' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: scsi: storvsc: Fix storvsc_queuecommand() memory leak x86/hyperv: Properly deal with empty cpumasks in hyperv_flush_tlb_multi() Drivers: hv: vmbus: Initialize request offers message for Isolation VM scsi: storvsc: Fix unsigned comparison to zero swiotlb: Add CONFIG_HAS_IOMEM check around swiotlb_mem_remap() x86/hyperv: Fix definition of hv_ghcb_pg variable Drivers: hv: Fix definition of hypercall input & output arg variables net: netvsc: Add Isolation VM support for netvsc driver scsi: storvsc: Add Isolation VM support for storvsc driver hyper-v: Enable swiotlb bounce buffer for Isolation VM x86/hyper-v: Add hyperv Isolation VM check in the cc_platform_has() swiotlb: Add swiotlb bounce buffer remap function for HV IVM
2022-01-14virtio: wrap config->reset callsMichael S. Tsirkin1-1/+1
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds86-1589/+3691
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, pm80xx, lpfc, mpi3mr, mpt3sas, hisi_sas, libsas) and minor updates and bug fixes. The most impactful change is likely the switch from GFP_DMA to GFP_KERNEL in a bunch of drivers, but even that shouldn't affect too many people" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (121 commits) scsi: mpi3mr: Bump driver version to 8.0.0.61.0 scsi: mpi3mr: Fixes around reply request queues scsi: mpi3mr: Enhanced Task Management Support Reply handling scsi: mpi3mr: Use TM response codes from MPI3 headers scsi: mpi3mr: Add io_uring interface support in I/O-polled mode scsi: mpi3mr: Print cable mngnt and temp threshold events scsi: mpi3mr: Support Prepare for Reset event scsi: mpi3mr: Add Event acknowledgment logic scsi: mpi3mr: Gracefully handle online FW update operation scsi: mpi3mr: Detect async reset that occurred in firmware scsi: mpi3mr: Add IOC reinit function scsi: mpi3mr: Handle offline FW activation in graceful manner scsi: mpi3mr: Code refactor of IOC init - part2 scsi: mpi3mr: Code refactor of IOC init - part1 scsi: mpi3mr: Fault IOC when internal command gets timeout scsi: mpi3mr: Display IOC firmware package version scsi: mpi3mr: Handle unaligned PLL in unmap cmnds scsi: mpi3mr: Increase internal cmnds timeout to 60s scsi: mpi3mr: Do access status validation before adding devices scsi: mpi3mr: Add support for PCIe Managed Switch SES device ...
2022-01-13Merge tag 'irq-core-2022-01-13' of ↵Linus Torvalds3-26/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Provide a new interface for affinity hints to provide a separation between hint and actual affinity change which has become a hidden property of the current interface - Fix up the in tree usage of the affinity hint interfaces Drivers: - No new irqchip drivers! - Fix GICv3 redistributor table reservation with RT across kexec - Fix GICv4.1 redistributor view of the VPE table across kexec - Add support for extra interrupts on spear-shirq - Make obtaining some interrupts optional for the Renesas drivers - Various cleanups and bug fixes" * tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time irqchip/ingenic-tcu: Use correctly sized arguments for bit field irqchip/gic-v2m: Add const to of_device_id irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init irqchip/spear-shirq: Add support for IRQ 0..6 irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve irqchip/gic-v3-its: Give the percpu rdist struct its own flags field net/mlx4: Use irq_update_affinity_hint() net/mlx5: Use irq_set_affinity_and_hint() hinic: Use irq_set_affinity_and_hint() scsi: lpfc: Use irq_set_affinity() mailbox: Use irq_update_affinity_hint() ixgbe: Use irq_update_affinity_hint() be2net: Use irq_update_affinity_hint() enic: Use irq_update_affinity_hint() RDMA/irdma: Use irq_update_affinity_hint() scsi: mpt3sas: Use irq_set_affinity_and_hint() ...
2022-01-12Merge tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-blockLinus Torvalds13-68/+100
Pull block updates from Jens Axboe: - Unify where the struct request handling code is located in the blk-mq code (Christoph) - Header cleanups (Christoph) - Clean up the io_context handling code (Christoph, me) - Get rid of ->rq_disk in struct request (Christoph) - Error handling fix for add_disk() (Christoph) - request allocation cleanusp (Christoph) - Documentation updates (Eric, Matthew) - Remove trivial crypto unregister helper (Eric) - Reduce shared tag overhead (John) - Reduce poll_stats memory overhead (me) - Known indirect function call for dio (me) - Use atomic references for struct request (me) - Support request list issue for block and NVMe (me) - Improve queue dispatch pinning (Ming) - Improve the direct list issue code (Keith) - BFQ improvements (Jan) - Direct completion helper and use it in mmc block (Sebastian) - Use raw spinlock for the blktrace code (Wander) - fsync error handling fix (Ye) - Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me) * tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits) MAINTAINERS: add entries for block layer documentation docs: block: remove queue-sysfs.rst docs: sysfs-block: document virt_boundary_mask docs: sysfs-block: document stable_writes docs: sysfs-block: fill in missing documentation from queue-sysfs.rst docs: sysfs-block: add contact for nomerges docs: sysfs-block: sort alphabetically docs: sysfs-block: move to stable directory block: don't protect submit_bio_checks by q_usage_counter block: fix old-style declaration nvme-pci: fix queue_rqs list splitting block: introduce rq_list_move block: introduce rq_list_for_each_safe macro block: move rq_list macros to blk-mq.h block: drop needless assignment in set_task_ioprio() block: remove unnecessary trailing '\' bio.h: fix kernel-doc warnings block: check minor range in device_add_disk() block: use "unsigned long" for blk_validate_block_size(). block: fix error unwinding in device_add_disk ...
2022-01-10scsi: storvsc: Fix storvsc_queuecommand() memory leakJuan Vazquez1-5/+12
Fix possible memory leak in error path of storvsc_queuecommand() when DMA mapping fails. Signed-off-by: Juan Vazquez <juvazq@linux.microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/20220109001758.6401-1-juvazq@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-01-08Merge branch 'linus' into irq/core, to fix conflictIngo Molnar12-59/+75
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2022-01-05scsi: storvsc: Fix unsigned comparison to zeroYueHaibing1-4/+2
The unsigned variable sg_count is being assigned a return value from the call to scsi_dma_map() that can return -ENOMEM. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20211227040311.54584-1-yuehaibing@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-12-31Merge tag 'scsi-fixes' of ↵Linus Torvalds3-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes, all in drivers. The lpfc one doesn't look exploitable, but nasty things could happen in string operations if mybuf ends up with an on stack unterminated string" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: vmw_pvscsi: Set residual data length conditionally scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown() scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
2021-12-23scsi: mpi3mr: Bump driver version to 8.0.0.61.0Sreekanth Reddy1-2/+2
Update the driver version to newer version format i.e. 8.0.0.61.0. Link: https://lore.kernel.org/r/20211220141159.16117-26-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Fixes around reply request queuesSreekanth Reddy2-2/+5
Set reply queue depth of 1K for B0 and 4K for A0. While freeing the segmented request queues use the actual queue depth that is used while creating them. Link: https://lore.kernel.org/r/20211220141159.16117-25-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Enhanced Task Management Support Reply handlingSreekanth Reddy2-38/+185
Enhance driver to consider MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a success for TMs issued by it and check the pending I/Os to decide the success or failure of the task management requests instead of just considering the MPI3_IOCSTATUS_SCSI_IOC_TERMINATED as a failure of the task management request. Link: https://lore.kernel.org/r/20211220141159.16117-24-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Use TM response codes from MPI3 headersSreekanth Reddy2-34/+27
Remove locally defined TM response codes and use codes from MPI3 headers. Link: https://lore.kernel.org/r/20211220141159.16117-23-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Add io_uring interface support in I/O-polled modeSreekanth Reddy3-38/+210
Add support for the io_uring interface in I/O-polled mode. This feature is disabled in the driver by default. To enable the feature, a module parameter "poll_queues" has to be set with the desired number of polling queues. When the feature is enabled, the driver reserves a certain number of operational queue pairs for the poll_queues either from the available queue pairs or creates additional queue pairs based on the operational queue availability. The Polling queues will have corresponding IRQ and ISR functions as similar to default queues. However, the IRQ line is disabled by the driver for poll_queues. Link: https://lore.kernel.org/r/20211220141159.16117-22-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Print cable mngnt and temp threshold eventsSreekanth Reddy2-3/+73
Print cable management & temperature threshold event data. Use vendor id & device id macro definitions from MPI3 headers. Link: https://lore.kernel.org/r/20211220141159.16117-21-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Support Prepare for Reset eventSreekanth Reddy3-33/+96
The IOC sends a Prepare for Reset Event to the host to prepare for a Soft Reset. This event data has two reason codes: 1. Start - The host is expected to gracefully quiesce all I/O within approximately 1 second. 2. Abort - The IOC is requesting to abort a previous Prepare for Reset Event request. Normal I/O may be resumed. Link: https://lore.kernel.org/r/20211220141159.16117-20-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Add Event acknowledgment logicSreekanth Reddy3-12/+224
Add Event acknowledgment logic. Link: https://lore.kernel.org/r/20211220141159.16117-19-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Gracefully handle online FW update operationSreekanth Reddy2-18/+92
Enhance driver to gracefully handle discrepancies in certain key data sizes between firmware update operations as mentioned below: - The driver displays an error message and marks the controller as unrecoverable if the firmware reports ReplyFrameSize that is greater than the current ReplyFrameSize. - If the firmware reports ReplyFrameSize greater than the current ReplyFrameSize then the driver uses the current ReplyFrameSize while copying the reply messages. - The driver displays an error message and marks the controller as unrecoverable if the firmware reports MaxOperationalReplyQueues less than the currently allocated operational reply queues count. - If the firmware reports MaxOperationalReplyQueues that is greater than the currently allocated operational reply queue count then the driver ignores the new increased value and uses the previously allocated number of operational queues only. - If the firmware reports MaxDevHandle greater than the previously used MaxDevHandle value after a reset then the driver re-allocates the 'device remove pending bitmap' buffer with the newer size using krealloc(). Link: https://lore.kernel.org/r/20211220141159.16117-18-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Detect async reset that occurred in firmwareSreekanth Reddy3-163/+120
Detect asynchronous reset that occurred in the firmware by polling for reset history bit of IOC status register is set and if that bit is set, then the driver waits for the controller to become ready and then re-initializes the controller. Also reduce the time driver is waiting for the controller to acknowledge the reset action after issuing a specific reset action to the controller. The wait time is reduced from 510 seconds to 30 seconds. If the controller didn't acknowledge a specific reset action within the time interval then the driver marks the controller as unrecoverable instead of retrying two more times prior to giving up. Link: https://lore.kernel.org/r/20211220141159.16117-17-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Add IOC reinit functionSreekanth Reddy1-1/+115
Add IOC reinitialization function. Link: https://lore.kernel.org/r/20211220141159.16117-16-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Handle offline FW activation in graceful mannerSreekanth Reddy3-128/+120
Currently the driver marks the controller as unrecoverable if there is an asynchronous reset or fault during the initialization, reinitialization post reset, and OS resume. Enhance driver to retry the initialization, re-initialization, and resume sequences for a maximum of 3 times if the controller became faulty or asynchronously reset due to a firmware activation during the initialization sequence. Link: https://lore.kernel.org/r/20211220141159.16117-15-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Code refactor of IOC init - part2Sreekanth Reddy1-78/+89
Move the IOC initialization's bring up logic to mpi3mr_bring_ioc_ready() routine. Link: https://lore.kernel.org/r/20211220141159.16117-14-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Code refactor of IOC init - part1Sreekanth Reddy1-34/+73
Separate out reply and sense buffer allocation and initialization into two routines and call only initialization routine while issuing the IOC Init request message. Also move out the event enable logic to a separate function. Link: https://lore.kernel.org/r/20211220141159.16117-13-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Fault IOC when internal command gets timeoutSreekanth Reddy2-48/+67
Save snapdump and fault the controller with the given reason code if it is already not in the fault or not in asynchronous reset. This ensures that soft reset is issued from the watchdog thread. This will also be used to handle initialization time faults/resets/timeout as in those cases immediate soft reset invocation is not required. Link: https://lore.kernel.org/r/20211220141159.16117-12-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Display IOC firmware package versionSreekanth Reddy1-0/+89
Display IOC firmware package version by reading component image upload data. Link: https://lore.kernel.org/r/20211220141159.16117-11-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Handle unaligned PLL in unmap cmndsSreekanth Reddy1-10/+26
The following special handling is needed for UNMAP commands issued to NVMe drives: - On B0 boards, if the parameter list length is greater than 24 and not a 16-byte multiple, then truncate the parameter list length to a 16-byte multiple. - On A0 boards, if the parameter list length is greater than block descriptor data length + 8, then truncate the parameter list length to block descriptor data length + 8 value. Link: https://lore.kernel.org/r/20211220141159.16117-10-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Increase internal cmnds timeout to 60sSreekanth Reddy2-6/+9
- Increase internal command timeout to 60 seconds. - Enable 16 device removal handshake processing in parallel in the device removal handshake infrastructure. Link: https://lore.kernel.org/r/20211220141159.16117-9-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Do access status validation before adding devicesSreekanth Reddy1-0/+11
Add validation for various access statuses prior to exposing attached target device to the operating system. Link: https://lore.kernel.org/r/20211220141159.16117-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Add support for PCIe Managed Switch SES deviceSreekanth Reddy2-11/+32
The SAS4 Controller firmware exposes the SES devices in Managed PCIe Switch as a PCIe Device Type SCSI Device (MPI3_DEVICE0_PCIE_DEVICE_INFO_TYPE_SCSI_DEVICE). Driver is enhanced to handle this device type by: - Exposing the device to the upper layers and - Not updating any hardware sectors & virtual boundary settings as these settings are needed only for NVMe devices. Link: https://lore.kernel.org/r/20211220141159.16117-7-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Update MPI3 headers - part2Sreekanth Reddy8-61/+261
Continued updating MPI3 headers. Link: https://lore.kernel.org/r/20211220141159.16117-6-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Update MPI3 headers - part1Sreekanth Reddy2-106/+499
Update MPI3 headers. Link: https://lore.kernel.org/r/20211220141159.16117-5-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Don't reset IOC if cmnds flush with reset statusSreekanth Reddy2-6/+9
Don't issue the soft reset if internal commands are flushed out with reset status. Soft reset needs to be issued only if commands are really timed out. Link: https://lore.kernel.org/r/20211220141159.16117-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Replace spin_lock() with spin_lock_irqsave()Sreekanth Reddy1-4/+6
Use spin_lock_irqsave() instead of spin_lock() while acquiring reply_free_queue_lock & sbq_lock locks. Link: https://lore.kernel.org/r/20211220141159.16117-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-23scsi: mpi3mr: Add debug APIs based on logging_level bitsSreekanth Reddy1-24/+109
Add debug print functions which will print messages based on logging_level bits enabled. Link: https://lore.kernel.org/r/20211220141159.16117-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: pmcraid: Don't use GFP_DMA in pmcraid_alloc_sglist()Christoph Hellwig1-2/+2
The driver doesn't express DMA addressing limitation under 32-bits anywhere else, so remove the spurious GFP_DMA allocation. Link: https://lore.kernel.org/r/20211222092247.928711-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: snic: Don't use GFP_DMA in snic_queue_report_tgt_req()Christoph Hellwig1-1/+1
The driver doesn't express DMA addressing limitation under 32-bits anywhere else, so remove the spurious GFP_DMA allocation. Link: https://lore.kernel.org/r/20211222092048.925829-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: myrs: Don't use GFP_DMAChristoph Hellwig1-6/+4
The myrs devices supports 64-bit addressing, so remove the spurious GFP_DMA allocations. Link: https://lore.kernel.org/r/20211222091935.925624-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: myrb: Don't use GFP_DMA in myrb_pdev_slave_alloc()Christoph Hellwig1-1/+1
The driver doesn't express DMA addressing limitation under 32-bits anywhere else, so remove the spurious GFP_DMA allocation. Link: https://lore.kernel.org/r/20211222091801.924745-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: initio: Don't use GFP_DMA in initio_probe_one()Christoph Hellwig1-1/+2
The driver doesn't express DMA addressing limitation under 32-bits anywhere else, so remove the spurious GFP_DMA allocation. Link: https://lore.kernel.org/r/20211222091630.922788-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: sr: Don't use GFP_DMAChristoph Hellwig2-3/+3
The allocated buffers are used as a command payload, for which the block layer and/or DMA API do the proper bounce buffering if needed. Link: https://lore.kernel.org/r/20211222090842.920724-1-hch@lst.de Reported-by: Baoquan He <bhe@redhat.com> Reviewed-by: Baoquan He <bhe@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: ch: Don't use GFP_DMAChristoph Hellwig1-3/+3
The allocated buffers are used as a command payload, for which the block layer and/or DMA API do the proper bounce buffering if needed. Link: https://lore.kernel.org/r/20211222090311.916624-1-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: hisi_sas: Use autosuspend for the host controllerXiang Chen1-0/+2
The controller may frequently enter and exit suspend for each I/O which we need to deal with. This is inefficient and may cause too much suspend and resume activity for the controller. To avoid this, use a default 5s autosuspend for the controller to stop frequently suspending and resuming. This value may still be modified via sysfs interfaces. Link: https://lore.kernel.org/r/1639999298-244569-16-git-send-email-chenxiang66@hisilicon.com Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: libsas: Keep host active while processing eventsXiang Chen1-3/+21
Processing events such as PORTE_BROADCAST_RCVD may cause dependency issues for runtime power management support. Such a problem would be that handling a PORTE_BROADCAST_RCVD event requires that the host is resumed to send SMP commands. However, in resuming the host, the phyup events generated from re-enabling the phys are processed in the same workqueue as the original PORTE_BROADCAST_RCVD event. As such, the host will never finish resuming (as it waits for the phyup event processing), and then the PORTE_BROADCAST_RCVD event can't be processed as the SMP commands are blocked, and so we have a deadlock. Solve this problem by ensuring that libsas keeps the host active until completely finished phy or port events, such as PORTE_BYTES_DMAED. As such, we don't have to worry about resuming the host for processing individual SMP commands in this example. Link: https://lore.kernel.org/r/1639999298-244569-15-git-send-email-chenxiang66@hisilicon.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: hisi_sas: Keep controller active between ISR of phyup and the event ↵Xiang Chen3-3/+24
being processed It is possible that controller may become suspended between processing a phyup interrupt and the event being processed by libsas. As such, we can't ensure the controller is active when processing the phyup event - this may cause the phyup event to be lost or other issues. To avoid any possible issues, add pm_runtime_get_noresume() in phyup interrupt handler and pm_runtime_put_sync() in the work handler exit to ensure that we stay always active. Since we only want to call pm_runtime_get_noresume() for v3 hw, signal this will a new event, HISI_PHYE_PHY_UP_PM. Link: https://lore.kernel.org/r/1639999298-244569-14-git-send-email-chenxiang66@hisilicon.com Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: libsas: Defer works of new phys during suspendXiang Chen2-0/+25
During the processing of event PORT_BYTES_DMAED, the driver queues work DISCE_DISCOVER_DOMAIN and then flushes workqueue ha->disco_q. If a new phyup event occurs during resuming the controller, the work PORTE_BYTES_DMAED of new phy occurs before suspended phy's. The work DISCE_DISCOVER_DOMAIN of new phy requires an active SAS controller (it needs to resume SAS controller by function scsi_sysfs_add_sdev() and some other functions such as function add_device_link()). However, the activation of the SAS controller requires completion of work PORTE_BYTES_DMAED of suspended phys while it is blocked by new phy's work on ha->event_q. So there is a deadlock and it is released only after resume timeout. To solve the issue, defer works of new phys during suspend and queue those defer works after SAS controller becomes active. Link: https://lore.kernel.org/r/1639999298-244569-13-git-send-email-chenxiang66@hisilicon.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: libsas: Refactor sas_queue_deferred_work()Xiang Chen2-11/+15
In the second part of function __sas_drain_work(), deferred work is queued. This functionality is required other places so factor it out into the function sas_queue_deferred_work(). Link: https://lore.kernel.org/r/1639999298-244569-12-git-send-email-chenxiang66@hisilicon.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: libsas: Add flag SAS_HA_RESUMINGXiang Chen1-0/+2
Add a flag SAS_HA_RESUMING and use it to indicate the state of resuming the host controller. Link: https://lore.kernel.org/r/1639999298-244569-11-git-send-email-chenxiang66@hisilicon.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: libsas: Resume host while sending SMP I/OsXiang Chen2-0/+4
When sending SMP I/Os to the host we need to ensure that the host is not suspended and can process the commands. This is a better approach than replying on the host to resume itself to handle such commands. Use pm_runtime_get_sync() and pm_runtime_put_sync() calls for the host when executing SMP I/Os. Link: https://lore.kernel.org/r/1639999298-244569-10-git-send-email-chenxiang66@hisilicon.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-22scsi: hisi_sas: Add more logs for runtime suspend/resumeXiang Chen1-2/+6
Add some logs at the beginning and end of suspend/resume. Link: https://lore.kernel.org/r/1639999298-244569-9-git-send-email-chenxiang66@hisilicon.com Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Powered by cgit, Gruvboxed by Blaster4385.