| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Break out several intertwined paths when cmd->result is non zero and place
them in the scsi_io_completion_nz_result helper function. The logic is not
changed.
Signed-off-by: Douglas Gilbert <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Change and add some variable names, adjust some associated comments for
clarity. Correct some misleading comments.
Signed-off-by: Douglas Gilbert <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
scsi_end_request() is called multiple times from scsi_io_completion() which
branches on its bool returned value. Add comment before the static
definition of scsi_end_request() about the meaning of that return.
Signed-off-by: Douglas Gilbert <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Douglas Gilbert <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx.
In the absence of Nic, we're also taking target updates which are
mostly minor except for the tcmu refactor.
The only real core change to worry about is the removal of high page
bouncing (in sas, storvsc and iscsi). This has been well tested and no
problems have shown up so far"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
scsi: lpfc: update driver version to 12.0.0.4
scsi: lpfc: Fix port initialization failure.
scsi: lpfc: Fix 16gb hbas failing cq create.
scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
scsi: lpfc: correct oversubscription of nvme io requests for an adapter
scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
scsi: hisi_sas: Mark PHY as in reset for nexus reset
scsi: hisi_sas: Fix return value when get_free_slot() failed
scsi: hisi_sas: Terminate STP reject quickly for v2 hw
scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
scsi: hisi_sas: Try wait commands before before controller reset
scsi: hisi_sas: Init disks after controller reset
scsi: hisi_sas: Create a scsi_host_template per HW module
scsi: hisi_sas: Reset disks when discovered
scsi: hisi_sas: Add LED feature for v3 hw
scsi: hisi_sas: Change common allocation mode of device id
scsi: hisi_sas: change slot index allocation mode
scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- replace the force_dma flag with a dma_configure bus method. (Nipun
Gupta, although one patch is іncorrectly attributed to me due to a
git rebase bug)
- use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
- remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
right thing for bounce buffering.
- move dma-debug initialization to common code, and apply a few
cleanups to the dma-debug code.
- cleanup the Kconfig mess around swiotlb selection
- swiotlb comment fixup (Yisheng Xie)
- a trivial swiotlb fix. (Dan Carpenter)
- support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
- add a new generic dma-noncoherent dma_map_ops implementation and use
it for arc, c6x and nds32.
- improve scatterlist validity checking in dma-debug. (Robin Murphy)
- add a struct device quirk to limit the dma-mask to 32-bit due to
bridge/system issues, and switch x86 to use it instead of a local
hack for VIA bridges.
- handle devices without a dma_mask more gracefully in the dma-direct
code.
* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
dma-direct: don't crash on device without dma_mask
nds32: use generic dma_noncoherent_ops
nds32: implement the unmap_sg DMA operation
nds32: consolidate DMA cache maintainance routines
x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
x86/pci-dma: remove the explicit nodac and allowdac option
x86/pci-dma: remove the experimental forcesac boot option
Documentation/x86: remove a stray reference to pci-nommu.c
core, dma-direct: add a flag 32-bit dma limits
dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
dma-debug: check scatterlist segments
c6x: use generic dma_noncoherent_ops
arc: use generic dma_noncoherent_ops
arc: fix arc_dma_{map,unmap}_page
arc: fix arc_dma_sync_sg_for_{cpu,device}
arc: simplify arc_dma_sync_single_for_{cpu,device}
dma-mapping: provide a generic dma-noncoherent implementation
dma-mapping: simplify Kconfig dependencies
riscv: add swiotlb support
riscv: only enable ZONE_DMA32 for 64-bit
...
|
|
Commit 505aa4b6a883 ("scsi: sd: Defer spinning up drive while SANITIZE is
in progress") may not be sufficient, especially if the SCSI SANITIZE
command is sent via the bsg or sg pass-throughs, since they don't use the
sd driver.
Add "Sanitize in progress" plus some other recent "... in progress"
additional sense codes into the scsi mid-level so they are treated in a
similar fashion to "Format in progress".
[mkp: checkpatch]
Signed-off-by: Douglas Gilbert <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Same numerical value (for now at least), but a much better documentation
of intent.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Switch everyone to blk_get_request_flags, and then rename
blk_get_request_flags to blk_get_request.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We can rely on the dma-mapping code to handle any DMA limits that is
bigger than the ISA DMA mask for us (either using an iommu or swiotlb),
so remove setting the block layer bounce limit for anything but the
unchecked_isa_dma case, or the bouncing for highmem pages.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jens Axboe <[email protected]>
|
|
Ensure that CONDITION MET and other non-zero status values that indicate
success are translated into BLK_STS_OK.
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: Damien Le Moal <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Lee Duncan <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
scsi_result_to_blk_status()
Since the next patch will modify this function such that it checks more than
just the host byte of the SCSI result, rename __scsi_error_from_host_byte()
into scsi_result_to_blk_status(). This patch does not change any
functionality.
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: Damien Le Moal <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Lee Duncan <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
__scsi_error_from_host_byte()"
The description of commit e39a97353e53 is wrong: it mentions that commit
2a842acab109 introduced a bug in __scsi_error_from_host_byte() although that
commit did not change the behavior of that function. Additionally, commit
e39a97353e53 introduced a bug: it causes commands that fail with
hostbyte=DID_OK and driverbyte=DRIVER_SENSE to be completed with
BLK_STS_OK. Hence revert that commit.
Fixes: e39a97353e53 ("scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()")
Reported-by: Damien Le Moal <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Douglas Gilbert <[email protected]>
Cc: Damien Le Moal <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Lee Duncan <[email protected]>
Cc: [email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc,
ufs, mpt3sas, hisi_sas.
In addition we have removed several really old drivers: sym53c416,
NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c
initialization from all remaining drivers.
Plus an assortment of bug fixes, initialization errors and other minor
fixes"
* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits)
scsi: ufs: Add support for Auto-Hibernate Idle Timer
scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries
scsi: qla2xxx: fx00 copypaste typo
scsi: qla2xxx: fix error message on <qla2400
scsi: smartpqi: update driver version
scsi: smartpqi: workaround fw bug for oq deletion
scsi: arcmsr: Change driver version to v1.40.00.05-20180309
scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready
scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.
scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug
scsi: qla2xxx: Update driver version to 10.00.00.06-k
scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan
scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling
scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset
scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY
scsi: qla2xxx: Remove nvme_done_list
scsi: qla2xxx: Return busy if rport going away
scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change
scsi: qla2xxx: Add FC-NVMe abort processing
scsi: qla2xxx: Add changes for devloss timeout in driver
...
|
|
Pull block layer updates from Jens Axboe:
"It's a pretty quiet round this time, which is nice. This contains:
- series from Bart, cleaning up the way we set/test/clear atomic
queue flags.
- series from Bart, fixing races between gendisk and queue
registration and removal.
- set of bcache fixes and improvements from various folks, by way of
Michael Lyle.
- set of lightnvm updates from Matias, most of it being the 1.2 to
2.0 transition.
- removal of unused DIO flags from Nikolay.
- blk-mq/sbitmap memory ordering fixes from Omar.
- divide-by-zero fix for BFQ from Paolo.
- minor documentation patches from Randy.
- timeout fix from Tejun.
- Alpha "can't write a char atomically" fix from Mikulas.
- set of NVMe fixes by way of Keith.
- bsg and bsg-lib improvements from Christoph.
- a few sed-opal fixes from Jonas.
- cdrom check-disk-change deadlock fix from Maurizio.
- various little fixes, comment fixes, etc from various folks"
* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
blk-mq: Directly schedule q->timeout_work when aborting a request
blktrace: fix comment in blktrace_api.h
lightnvm: remove function name in strings
lightnvm: pblk: remove some unnecessary NULL checks
lightnvm: pblk: don't recover unwritten lines
lightnvm: pblk: implement 2.0 support
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: rename ppaf* to addrf*
lightnvm: pblk: check for supported version
lightnvm: implement get log report chunk helpers
lightnvm: make address conversions depend on generic device
lightnvm: add support for 2.0 address format
lightnvm: normalize geometry nomenclature
lightnvm: complete geo structure with maxoc*
lightnvm: add shorten OCSSD version in geo
lightnvm: add minor version to generic geometry
lightnvm: simplify geometry structure
lightnvm: pblk: refactor init/exit sequences
lightnvm: Avoid validation of default op value
lightnvm: centralize permission check for lightnvm ioctl
...
|
|
Somewhat nasty merge due to conflicts between "33b28357dd00 scsi:
qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan" and "2b5b96473efc
scsi: qla2xxx: Fix FC-NVMe LUN discovery"
Merge is non-trivial and has been verified by Qlogic (Cavium)
Signed-off-by: James E.J. Bottomley <[email protected]>
|
|
The current BSG design tries to shoe-horn the transport-specific
passthrough commands into the overall framework for SCSI passthrough
requests. This has a couple problems:
- each passthrough queue has to set the QUEUE_FLAG_SCSI_PASSTHROUGH flag
despite not dealing with SCSI commands at all. Because of that these
queues could also incorrectly accept SCSI commands from in-kernel
users or through the legacy SCSI_IOCTL_SEND_COMMAND ioctl.
- the real SCSI bsg queues also incorrectly accept bsg requests of the
BSG_SUB_PROTOCOL_SCSI_TRANSPORT type
- the bsg transport code is almost unredable because it tries to reuse
different SCSI concepts for its own purpose.
This patch instead adds a new bsg_ops structure to handle the two cases
differently, and thus solves all of the above problems. Another side
effect is that the bsg-lib queues also don't need to embedd a
struct scsi_request anymore.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The SCSI PRE-FETCH (10 or 16) command is present both on hard disks
and some SSDs. It is useful when the address of the next block(s) to
be read is known but it is not following the LBA of the current READ
(so read-ahead won't help). It returns two "good" SCSI Status values.
If the requested blocks have fitted (or will most likely fit (when
the IMMED bit is set)) into the disk's cache, it returns CONDITION
MET. If it didn't (or will not) fit then it returns GOOD status.
The goal of this patch is to stop the SCSI subsystem treating the
CONDITION MET SCSI status as an error. The current state makes the
PRE-FETCH command effectively unusable via pass-throughs.
Signed-off-by: Douglas Gilbert <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This patch has been generated as follows:
for verb in set_unlocked clear_unlocked set clear; do
replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
$(git grep -lw queue_flag_${verb} drivers block/bsg*)
done
Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.
Cc: Mike Snitzer <[email protected]>
Cc: Shaohua Li <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Ming Lei <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is mostly fixes for driver specific issues (nine of them) and the
storvsc performance improvement with interrupt handling which was
dropped from the previous fixes pull request.
We also have two regressions: one is a double call_rcu() in ATA error
handling and the other is a missed conversion to BLK_STS_OK in
__scsi_error_from_host_byte()"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Fix kernel crash during port toggle
scsi: qla2xxx: Fix FC-NVMe LUN discovery
scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()
scsi: core: Avoid that ATA error handling can trigger a kernel hang or oops
scsi: qla2xxx: ensure async flags are reset correctly
scsi: qla2xxx: do not check login_state if no loop id is assigned
scsi: qla2xxx: Fixup locking for session deletion
scsi: qla2xxx: Fix NULL pointer crash due to active timer for ABTS
scsi: mpt3sas: wait for and flush running commands on shutdown/unload
scsi: mpt3sas: fix oops in error handlers after shutdown/unload
scsi: storvsc: Spread interrupts when picking a channel for I/O requests
scsi: megaraid_sas: Do not use 32-bit atomic request descriptor for Ventura controllers
|
|
In scsi core, __scsi_queue_insert should just put request back on the
queue and retry using the same command as before. However, for blk-mq,
scsi_mq_requeue_cmd is employed here which will unprepare the
request. To align with the semantics of __scsi_queue_insert, use
blk_mq_requeue_request with kick_requeue_list == true and put the
reference of scsi_device.
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Jianchao Wang <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When converting __scsi_error_from_host_byte() to BLK_STS error codes the
case DID_OK was forgotten, resulting in it always returning an error.
Fixes: 2a842acab109 ("block: introduce new block status code type")
Cc: Doug Gilbert <[email protected]>
Signed-off-by: Hannes Reinecke <[email protected]>
Reviewed-by: Douglas Gilbert <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Avoid that the recently introduced call_rcu() call in the SCSI core
triggers a double call_rcu() call.
Reported-by: Natanael Copa <[email protected]>
Reported-by: Damien Le Moal <[email protected]>
References: https://bugzilla.kernel.org/show_bug.cgi?id=198861
Fixes: 3bd6f43f5cb3 ("scsi: core: Ensure that the SCSI error handler gets woken up")
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Tested-by: Damien Le Moal <[email protected]>
Cc: Natanael Copa <[email protected]>
Cc: Damien Le Moal <[email protected]>
Cc: Alexandre Oliva <[email protected]>
Cc: Pavel Tikhomirov <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Cc: <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Philipp Reisner <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Kees Cook <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Make scsi_test_unit_ready() send at most as many TURs as specified in
the 'retries' argument instead of retries * (retries + 1) / 2.
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull more block updates from Jens Axboe:
"Most of this is fixes and not new code/features:
- skd fix from Arnd, fixing a build error dependent on sla allocator
type.
- blk-mq scheduler discard merging fixes, one from me and one from
Keith. This fixes a segment miscalculation for blk-mq-sched, where
we mistakenly think two segments are physically contigious even
though the request isn't carrying real data. Also fixes a bio-to-rq
merge case.
- Don't re-set a bit on the buffer_head flags, if it's already set.
This can cause scalability concerns on bigger machines and
workloads. From Kemi Wang.
- Add BLK_STS_DEV_RESOURCE return value to blk-mq, allowing us to
distuingish between a local (device related) resource starvation
and a global one. The latter might happen without IO being in
flight, so it has to be handled a bit differently. From Ming"
* tag 'for-linus-20180204' of git://git.kernel.dk/linux-block:
block: skd: fix incorrect linux/slab_def.h inclusion
buffer: Avoid setting buffer bits that are already set
blk-mq-sched: Enable merging discard bio into request
blk-mq: fix discard merge with scheduler attached
blk-mq: introduce BLK_STS_DEV_RESOURCE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardened usercopy whitelisting from Kees Cook:
"Currently, hardened usercopy performs dynamic bounds checking on slab
cache objects. This is good, but still leaves a lot of kernel memory
available to be copied to/from userspace in the face of bugs.
To further restrict what memory is available for copying, this creates
a way to whitelist specific areas of a given slab cache object for
copying to/from userspace, allowing much finer granularity of access
control.
Slab caches that are never exposed to userspace can declare no
whitelist for their objects, thereby keeping them unavailable to
userspace via dynamic copy operations. (Note, an implicit form of
whitelisting is the use of constant sizes in usercopy operations and
get_user()/put_user(); these bypass all hardened usercopy checks since
these sizes cannot change at runtime.)
This new check is WARN-by-default, so any mistakes can be found over
the next several releases without breaking anyone's system.
The series has roughly the following sections:
- remove %p and improve reporting with offset
- prepare infrastructure and whitelist kmalloc
- update VFS subsystem with whitelists
- update SCSI subsystem with whitelists
- update network subsystem with whitelists
- update process memory with whitelists
- update per-architecture thread_struct with whitelists
- update KVM with whitelists and fix ioctl bug
- mark all other allocations as not whitelisted
- update lkdtm for more sensible test overage"
* tag 'usercopy-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (38 commits)
lkdtm: Update usercopy tests for whitelisting
usercopy: Restrict non-usercopy caches to size 0
kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
kvm: whitelist struct kvm_vcpu_arch
arm: Implement thread_struct whitelist for hardened usercopy
arm64: Implement thread_struct whitelist for hardened usercopy
x86: Implement thread_struct whitelist for hardened usercopy
fork: Provide usercopy whitelisting for task_struct
fork: Define usercopy region in thread_stack slab caches
fork: Define usercopy region in mm_struct slab caches
net: Restrict unwhitelisted proto caches to size 0
sctp: Copy struct sctp_sock.autoclose to userspace using put_user()
sctp: Define usercopy region in SCTP proto slab cache
caif: Define usercopy region in caif proto slab cache
ip: Define usercopy region in IP proto slab cache
net: Define usercopy region in struct proto slab cache
scsi: Define usercopy region in scsi_sense_cache slab cache
cifs: Define usercopy region in cifs_request slab cache
vxfs: Define usercopy region in vxfs_inode slab cache
ufs: Define usercopy region in ufs_inode_cache slab cache
...
|
|
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual driver suspects: arcmsr,
scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas,
hisi_sas.
We also have a rework of the libsas hotplug handling to make it more
robust, a slew of 32 bit time conversions and fixes, and a host of the
usual minor updates and style changes. The biggest potential for
regressions is the libsas hotplug changes, but so far they seem stable
under testing"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits)
scsi: qla2xxx: Fix logo flag for qlt_free_session_done()
scsi: arcmsr: avoid do_gettimeofday
scsi: core: Add VENDOR_SPECIFIC sense code definitions
scsi: qedi: Drop cqe response during connection recovery
scsi: fas216: fix sense buffer initialization
scsi: ibmvfc: Remove unneeded semicolons
scsi: hisi_sas: fix a bug in hisi_sas_dev_gone()
scsi: hisi_sas: directly attached disk LED feature for v2 hw
scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw
scsi: megaraid_sas: NVMe passthrough command support
scsi: megaraid: use ktime_get_real for firmware time
scsi: fnic: use 64-bit timestamps
scsi: qedf: Fix error return code in __qedf_probe()
scsi: devinfo: fix format of the device list
scsi: qla2xxx: Update driver version to 10.00.00.05-k
scsi: qla2xxx: Add XCB counters to debugfs
scsi: qla2xxx: Fix queue ID for async abort with Multiqueue
scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event()
scsi: qla2xxx: Fix warning during port_name debug print
scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout()
...
|
|
This status is returned from driver to block layer if device related
resource is unavailable, but driver can guarantee that IO dispatch
will be triggered in future when the resource is available.
Convert some drivers to return BLK_STS_DEV_RESOURCE. Also, if driver
returns BLK_STS_RESOURCE and SCHED_RESTART is set, rerun queue after
a delay (BLK_MQ_DELAY_QUEUE) to avoid IO stalls. BLK_MQ_DELAY_QUEUE is
3 ms because both scsi-mq and nvmefc are using that magic value.
If a driver can make sure there is in-flight IO, it is safe to return
BLK_STS_DEV_RESOURCE because:
1) If all in-flight IOs complete before examining SCHED_RESTART in
blk_mq_dispatch_rq_list(), SCHED_RESTART must be cleared, so queue
is run immediately in this case by blk_mq_dispatch_rq_list();
2) if there is any in-flight IO after/when examining SCHED_RESTART
in blk_mq_dispatch_rq_list():
- if SCHED_RESTART isn't set, queue is run immediately as handled in 1)
- otherwise, this request will be dispatched after any in-flight IO is
completed via blk_mq_sched_restart()
3) if SCHED_RESTART is set concurently in context because of
BLK_STS_RESOURCE, blk_mq_delay_run_hw_queue() will cover the above two
cases and make sure IO hang can be avoided.
One invariant is that queue will be rerun if SCHED_RESTART is set.
Suggested-by: Jens Axboe <[email protected]>
Tested-by: Laurence Oberman <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
SCSI sense buffers, stored in struct scsi_cmnd.sense and therefore
contained in the scsi_sense_cache slab cache, need to be copied to/from
userspace.
cache object allocation:
drivers/scsi/scsi_lib.c:
scsi_select_sense_cache(...):
return ... ? scsi_sense_isadma_cache : scsi_sense_cache
scsi_alloc_sense_buffer(...):
return kmem_cache_alloc_node(scsi_select_sense_cache(), ...);
scsi_init_request(...):
...
cmd->sense_buffer = scsi_alloc_sense_buffer(...);
...
cmd->req.sense = cmd->sense_buffer
example usage trace:
block/scsi_ioctl.c:
(inline from sg_io)
blk_complete_sghdr_rq(...):
struct scsi_request *req = scsi_req(rq);
...
copy_to_user(..., req->sense, len)
scsi_cmd_ioctl(...):
sg_io(...);
In support of usercopy hardening, this patch defines a region in
the scsi_sense_cache slab cache in which userspace copy operations
are allowed.
This region is known as the slab cache's usercopy region. Slab caches
can now check that each dynamically sized copy operation involving
cache-managed memory falls entirely within the slab's usercopy region.
Signed-off-by: David Windsor <[email protected]>
[kees: adjust commit log, provide usage trace]
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
This patch does not change any functionality but makes the SCSI core
source code slightly easier to read.
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Commit 651a01364994 ("scsi: scsi_transport_sas: switch to bsg-lib for
SMP passthrough") removed the only call to scsi_initialize_rq() from
outside the SCSI core. Hence unexport scsi_initialize_rq().
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
If scsi_eh_scmd_add() is called concurrently with
scsi_host_queue_ready() while shost->host_blocked > 0 then it can
happen that neither function wakes up the SCSI error handler. Fix
this by making every function that decreases the host_busy counter
wake up the error handler if necessary and by protecting the
host_failed checks with the SCSI host lock.
Reported-by: Pavel Tikhomirov <[email protected]>
References: https://marc.info/?l=linux-kernel&m=150461610630736
Fixes: commit 746650160866 ("scsi: convert host_busy to atomic_t")
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Pavel Tikhomirov <[email protected]>
Tested-by: Stuart Hayes <[email protected]>
Cc: Konstantin Khorenko <[email protected]>
Cc: Stuart Hayes <[email protected]>
Cc: Pavel Tikhomirov <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Cc: <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Before commit 0df21c86bdbf ("scsi: implement .get_budget and .put_budget
for blk-mq"), we run queue after 3ms if queue is idle and SCSI device
queue isn't ready, which is done in handling BLK_STS_RESOURCE. After
commit 0df21c86bdbf is introduced, queue won't be run any more under
this situation.
IO hang is observed when timeout happened, and this patch fixes the IO
hang issue by running queue after delay in scsi_dev_queue_ready, just
like non-mq. This issue can be triggered by the following script[1].
There is another issue which can be covered by running idle queue: when
.get_budget() is called on request coming from hctx->dispatch_list, if
one request just completes during .get_budget(), we can't depend on
SCSI's restart to make progress any more. This patch fixes the race too.
With this patch, we basically recover to previous behaviour (before
commit 0df21c86bdbf) of handling idle queue when running out of
resource.
[1] script for test/verify SCSI timeout
rmmod scsi_debug
modprobe scsi_debug max_queue=1
DEVICE=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename`
DISK_DIR=`ls -d /sys/block/$DEVICE/device/scsi_disk/*`
echo "using scsi device $DEVICE"
echo "-1" >/sys/bus/pseudo/drivers/scsi_debug/every_nth
echo "temporary write through" >$DISK_DIR/cache_type
echo "128" >/sys/bus/pseudo/drivers/scsi_debug/opts
echo none > /sys/block/$DEVICE/queue/scheduler
dd if=/dev/$DEVICE of=/dev/null bs=1M iflag=direct count=1 &
sleep 5
echo "0" >/sys/bus/pseudo/drivers/scsi_debug/opts
wait
echo "SUCCESS"
Fixes: 0df21c86bdbf ("scsi: implement .get_budget and .put_budget for blk-mq")
Signed-off-by: Ming Lei <[email protected]>
Tested-by: Holger Hoffstätte <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
In non-coherent DMA mode, kernel uses cache flushing operations to
maintain I/O coherency, so scsi's block queue should be aligned to the
value returned by dma_get_cache_alignment(). Otherwise, If a DMA buffer
and a kernel structure share a same cache line, and if the kernel
structure has dirty data, cache_invalidate (no writeback) will cause
data corruption.
Cc: [email protected]
Signed-off-by: Huacai Chen <[email protected]>
[hch: rebased and updated the comment and changelog]
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
updates.
There's no major behaviour change or additions to the core in all of
this, so the potential for regressions should be small (biggest
potential being in the scsi error handler changes)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
scsi: lpfc: Fix hard lock up NMI in els timeout handling.
scsi: mpt3sas: remove a stray KERN_INFO
scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
scsi: aacraid: use timespec64 instead of timeval
scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
scsi: mpt3sas: fix dma_addr_t casts
scsi: be2iscsi: Use kasprintf
scsi: storvsc: Avoid excessive host scan on controller change
scsi: lpfc: fix kzalloc-simple.cocci warnings
scsi: mpt3sas: Update mpt3sas driver version.
scsi: mpt3sas: Fix sparse warnings
scsi: mpt3sas: Fix nvme drives checking for tlr.
scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
scsi: mpt3sas: scan and add nvme device after controller reset
scsi: mpt3sas: Set NVMe device queue depth as 128
scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
scsi: mpt3sas: API's to remove nvme drive from sml
scsi: mpt3sas: API 's to support NVMe drive addition to SML
...
|
|
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
|
|
The contexts from which a SCSI device can be quiesced or resumed are:
* Writing into /sys/class/scsi_device/*/device/state.
* SCSI parallel (SPI) domain validation.
* The SCSI device power management methods. See also scsi_bus_pm_ops.
It is essential during suspend and resume that neither the filesystem
state nor the filesystem metadata in RAM changes. This is why while
the hibernation image is being written or restored that SCSI devices
are quiesced. The SCSI core quiesces devices through scsi_device_quiesce()
and scsi_device_resume(). In the SDEV_QUIESCE state execution of
non-preempt requests is deferred. This is realized by returning
BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI
devices. Avoid that a full queue prevents power management requests
to be submitted by deferring allocation of non-preempt requests for
devices in the quiesced state. This patch has been tested by running
the following commands and by verifying that after each resume the
fio job was still running:
for ((i=0; i<10; i++)); do
(
cd /sys/block/md0/md &&
while true; do
[ "$(<sync_action)" = "idle" ] && echo check > sync_action
sleep 1
done
) &
pids=($!)
for d in /sys/class/block/sd*[a-z]; do
bdev=${d#/sys/class/block/}
hcil=$(readlink "$d/device")
hcil=${hcil#../../../}
echo 4 > "$d/queue/nr_requests"
echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth"
fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \
--rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \
--iodepth_batch=1 --thread --loops=$((2**31)) &
pids+=($!)
done
sleep 1
echo "$(date) Hibernating ..." >>hibernate-test-log.txt
systemctl hibernate
sleep 10
kill "${pids[@]}"
echo idle > /sys/block/md0/md/sync_action
wait
echo "$(date) Done." >>hibernate-test-log.txt
done
Reported-by: Oleksandr Natalenko <[email protected]>
References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348).
Signed-off-by: Bart Van Assche <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Tested-by: Martin Steigerwald <[email protected]>
Tested-by: Oleksandr Natalenko <[email protected]>
Cc: Martin K. Petersen <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
requests
Convert blk_get_request(q, op, __GFP_RECLAIM) into
blk_get_request_flags(q, op, BLK_MQ_PREEMPT). This patch does not
change any functionality.
Signed-off-by: Bart Van Assche <[email protected]>
Tested-by: Martin Steigerwald <[email protected]>
Acked-by: David S. Miller <[email protected]> [ for IDE ]
Acked-by: Martin K. Petersen <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Tested-by: Oleksandr Natalenko <[email protected]>
Cc: Ming Lei <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
This reverts commit 8a97712e5314aefe16b3ffb4583a34deaa49de04.
This commit added a call to sysfs_notify() from within
scsi_device_set_state(), which in turn turns out to make libata very
unhappy, because ata_eh_detach_dev() does
spin_lock_irqsave(ap->lock, flags);
..
if (ata_scsi_offline_dev(dev)) {
dev->flags |= ATA_DFLAG_DETACHED;
ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
}
and ata_scsi_offline_dev() then does that scsi_device_set_state() to set
it offline.
So now we called sysfs_notify() from within a spinlocked region, which
really doesn't work. The 0day robot reported this as:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238
because sysfs_notify() ends up calling kernfs_find_and_get_ns() which
then does mutex_lock(&kernfs_mutex)..
The pollability of the device state isn't critical, so revert this all
for now, and maybe we'll do it differently in the future.
Reported-by: Fengguang Wu <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
Acked-by: Hannes Reinecke <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
It is enough to just check if we can get the budget via .get_budget().
And we don't need to deal with device state change in .get_budget().
For SCSI, one issue to be fixed is that we have to call
scsi_mq_uninit_cmd() to free allocated ressources if SCSI device fails
to handle the request. And it isn't enough to simply call
blk_mq_end_request() to do that if this request is marked as
RQF_DONTPREP.
Fixes: 0df21c86bdbf(scsi: implement .get_budget and .put_budget for blk-mq)
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
It is very expensive to atomic_inc/atomic_dec the host wide counter of
host->busy_count, and it should have been avoided via blk-mq's mechanism
of getting driver tag, which uses the more efficient way of sbitmap queue.
Also we don't check atomic_read(&sdev->device_busy) in scsi_mq_get_budget()
and don't run queue if the counter becomes zero, so IO hang may be caused
if all requests are completed just before the current SCSI device
is added to shost->starved_list.
Fixes: 0df21c86bdbf(scsi: implement .get_budget and .put_budget for blk-mq)
Reported-by: Bart Van Assche <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We need to tell blk-mq to reserve resources before queuing one request,
so implement these two callbacks. Then blk-mq can avoid to dequeue
request too early, and IO merging can be improved a lot.
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
In the following patch, we will implement scsi_get_budget()
which need to call scsi_prep_state_check() when rq isn't
dequeued yet.
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The legacy block layer handles requests as follows:
- If the prep function returns BLKPREP_OK, let blk_peek_request()
return the pointer to that request.
- If the prep function returns BLKPREP_DEFER, keep the RQF_STARTED
flag and retry calling the prep function later.
- If the prep function returns BLKPREP_KILL or BLKPREP_INVALID, end
the request.
In none of these cases it is correct to clear the SCMD_INITIALIZED
flag from inside scsi_prep_fn(). Since scsi_prep_fn() already
guarantees that scsi_init_command() will be called once even if
scsi_prep_fn() is called multiple times, remove the code that clears
SCMD_INITIALIZED from scsi_prep_fn().
The scsi-mq code handles requests as follows:
- If scsi_mq_prep_fn() returns BLKPREP_OK, set the RQF_DONTPREP flag
and submit the request to the SCSI LLD.
- If scsi_mq_prep_fn() returns BLKPREP_DEFER, call
blk_mq_delay_run_hw_queue() and return BLK_STS_RESOURCE.
- If the prep function returns BLKPREP_KILL or BLKPREP_INVALID, call
scsi_mq_uninit_cmd() and let the blk-mq core end the request.
In none of these cases scsi_mq_prep_fn() should clear the
SCMD_INITIALIZED flag. Hence remove the code from scsi_mq_prep_fn()
function that clears that flag.
This patch avoids that the following warning is triggered when using
the legacy block layer:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4198 at drivers/scsi/scsi_lib.c:654 scsi_end_request+0x1de/0x220
CPU: 1 PID: 4198 Comm: mkfs.f2fs Not tainted 4.14.0-rc5+ #1
task: ffff91c147a4b800 task.stack: ffffb282c37b8000
RIP: 0010:scsi_end_request+0x1de/0x220
Call Trace:
<IRQ>
scsi_io_completion+0x204/0x5e0
scsi_finish_command+0xce/0xe0
scsi_softirq_done+0x126/0x130
blk_done_softirq+0x6e/0x80
__do_softirq+0xcf/0x2a8
irq_exit+0xab/0xb0
do_IRQ+0x7b/0xc0
common_interrupt+0x90/0x90
</IRQ>
RIP: 0010:_raw_spin_unlock_irqrestore+0x9/0x10
__test_set_page_writeback+0xc7/0x2c0
__block_write_full_page+0x158/0x3b0
block_write_full_page+0xc4/0xd0
blkdev_writepage+0x13/0x20
__writepage+0x12/0x40
write_cache_pages+0x204/0x500
generic_writepages+0x48/0x70
blkdev_writepages+0x9/0x10
do_writepages+0x34/0xc0
__filemap_fdatawrite_range+0x6c/0x90
file_write_and_wait_range+0x31/0x90
blkdev_fsync+0x16/0x40
vfs_fsync_range+0x44/0xa0
do_fsync+0x38/0x60
SyS_fsync+0xb/0x10
entry_SYSCALL_64_fastpath+0x13/0x94
---[ end trace 86e8ef85a4a6c1d1 ]---
Fixes: commit 64104f703212 ("scsi: Call scsi_initialize_rq() for filesystem requests")
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Damien Le Moal <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
As per SAM there is a status precedence, with any sense code 29/XX
taking second place just after an ACA ACTIVE status. Additionally, each
target might prefer to not queue any unit attention conditions, but just
report one. Due to the above, this will be that one with the highest
precedence. This results in the sense code 29/XX effectively
overwriting any other unit attention. Hence we should report the
power-on reset to userland so that it can take appropriate action.
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Fix comments style (use kernel-doc style) and content to clarify some
functions. Also fix some functions signature indentation and remove a
useless blank line in sd_zbc_read_zones().
No functional change is introduced by this patch.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
One of the two scsi-mq functions that requeue a request unprepares a
request before requeueing (scsi_io_completion()) but the other function
not (__scsi_queue_insert()). Make sure that a request is unprepared
before requeuing it.
Fixes: commit d285203cf647 ("scsi: add support for a blk-mq based I/O path.")
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Damien Le Moal <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Requests are unprepared and reprepared when being requeued. Avoid that
requeuing resets .jiffies_at_alloc and .retries by initializing these
two member variables from inside scsi_initialize_rq() and by preserving
both member variables when preparing a request. This patch affects the
requeuing behavior of both the legacy scsi and the scsi-mq code paths.
Reported-by: Brian King <[email protected]>
References: https://lkml.org/lkml/2017/8/18/923 ("Re: [BUG][bisected 270065e] linux-next fails to boot on powerpc")
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Brian King <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
If a pass-through request is submitted then blk_get_request()
initializes that request by calling scsi_initialize_rq(). Also call this
function for filesystem requests. Introduce CMD_INITIALIZED to keep
track of whether or not a request has already been initialized.
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Brian King <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Introduce struct scsi_vpd for the VPD page length, data and the RCU head
that will be used to free the VPD data. Use kfree_rcu() instead of
kfree() to free VPD data. Move the VPD buffer pointer check inside the
RCU read lock in the sysfs code. Only annotate pointers that are shared
across threads with __rcu. Use rcu_dereference() when dereferencing an
RCU pointer. This patch suppresses about twenty sparse complaints about
the vpd_pg8[03] pointers. This patch also fixes a race condition, namely
that updating of the VPD pointers and length variables in struct
scsi_device was not atomic with reference to the code reading these
variables. See also "Does the update code tolerate concurrent accesses?"
in Documentation/RCU/checklist.txt.
Fixes: commit 09e2b0b14690 ("scsi: rescan VPD attributes")
Signed-off-by: Bart Van Assche <[email protected]>
Acked-by: Hannes Reinecke <[email protected]>
Reviewed-by: Shane Seymour <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Johannes Thumshirn <[email protected]>
Cc: Shane Seymour <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|