| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Reserve ECAM so we don't assign it to PCI BARs; this works around
bugs where BIOS included ECAM in a PNP0A03 host bridge window,
didn't reserve it via a PNP0C02 motherboard device, and didn't
allocate space for SR-IOV VF BARs (Bjorn Helgaas)
- Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)
- Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)
- Log device type (Root Port, Switch Port, etc) during enumeration
(Bjorn Helgaas)
- Log bridges before downstream devices so the dmesg order is more
logical (Bjorn Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc)
consistently instead of a mix of names and "reg 0x10" (Puranjay
Mohan, Bjorn Helgaas)
- Fix 64GT/s effective data rate calculation to use 1b/1b encoding
rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
Järvinen)
- Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
lpfc (Ilpo Järvinen)
- Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)
Resource management:
- Restructure pci_dev_for_each_resource() to avoid computing the
address of an out-of-bounds array element (the bounds check was
performed later so the element was never actually *read*, but it's
nicer to avoid even computing an out-of-bounds address) (Andy
Shevchenko)
Driver binding:
- Convert pci-host-common.c platform .remove() callback to
.remove_new() returning 'void' since it's not useful to return
error codes here (Uwe Kleine-König)
- Convert exynos, keystone, kirin from .remove() to .remove_new(),
which returns void instead of int (Uwe Kleine-König)
- Drop unused struct pci_driver.node member (Mathias Krause)
Virtualization:
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)
Error handling:
- Log AER errors as "Correctable" (not "Corrected") or
"Uncorrectable" to match spec terminology (Bjorn Helgaas)
- Decode Requester ID when no error info found instead of printing
the raw hex value (Bjorn Helgaas)
Endpoint framework:
- Use a unique test pattern for each BAR in the pci_endpoint_test to
make it easier to debug address translation issues (Niklas Cassel)
Broadcom STB PCIe controller driver:
- Add DT property "brcm,clkreq-mode" and driver support for different
CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)
Freescale Layerscape PCIe controller driver:
- Add suspend/resume support for Layerscape LS1043a and LS1021a,
including software-managed PME_Turn_Off and transitions between L0,
L2/L3_Ready Link states (Frank Li)
MediaTek PCIe controller driver:
- Clear MSI interrupt status before handler to avoid missing MSIs
that occur after the handler (qizhong cheng)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 translation window setup to handle MMIO space
that is not a power of two in size (Jianjun Wang)
Qualcomm PCIe controller driver:
- Increase qcom iommu-map maxItems to accommodate SDX55 (five
entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)
- Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
Kozlowski)
- Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
Kozlowski)
- Correct the qcom "reset-name" property, previously incorrectly
called "reset-names" (Krzysztof Kozlowski)
- Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
Armstrong)
Renesas R-Car PCIe controller driver:
- Replace of_device.h with explicit of.h include to untangle header
usage (Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v
regulators on KingFisher (Wolfram Sang)
SiFive FU740 PCIe controller driver:
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
ARCH_SIFIVE (Conor Dooley)
Synopsys DesignWare PCIe controller driver:
- Align iATU mapping for endpoint MSI-X (Niklas Cassel)
- Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
Shimoda)
- Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
Shimoda)
- Rename struct dw_pcie_ep_ops.func_conf_select() to
.get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)
- Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
Shimoda)
TI J721E PCIe driver:
- Add j721e DT and driver support for 'num-lanes' for devices that
support x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt
Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
specific to those TI SoC parts (Peter Robinson)
TI Keystone PCIe controller driver:
- Hold power management references to all PHYs while enabling them to
avoid a race when one provides clocks to others (Siddharth
Vadapalli)
Xilinx XDMA PCIe controller driver:
- Remove redundant dev_err(), since platform_get_irq() and
platform_get_irq_byname() already log errors (Yang Li)
- Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
(Krzysztof Wilczyński)
- Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
irq_domain_add_linear() fails (Harshit Mogalapalli)
MicroSemi Switchtec management driver:
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was
done in stdev_release(), which used stale pointers if stdev->cdev
happened to be open when the PCI device was removed (Daniel
Stodden)
Miscellaneous:
- Convert interrupt terminology from "legacy" to "INTx" to be more
specific and match spec terminology (Damien Le Moal)
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
deprecated ida_simple_*() API with ida_alloc() and ida_free()
(Christophe JAILLET)"
* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Fix kernel-doc issues
PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
PCI: keystone: Fix race condition when initializing PHYs
PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
misc: pci_endpoint_test: Use a unique test pattern for each BAR
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI/AER: Use explicit register sizes for struct members
PCI/AER: Decode Requester ID when no error info found
PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
...
|
|
Update lpfc version to 14.2.0.17
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
completes
If priority tagging is set in the service parameters of a FLOGI cmpl, then
we update the vmid_flag. In the current logic, if a follow up FLOGI cmpl
updates its service parameters such that priority tagging is no longer set,
then the vmid_flag ends up keeping stale data.
Fix by ensuring we clear the vmid_flag member during lpfc_reinit_vmid, and
check the priority tagging service parameter after reinitialization of the
vmid data structures.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After a follow up FDISC cmpl, an NPIV's VMID data structures are not
updated.
Fix by calling lpfc_reinit_vmid and copying the physical port's vmid_flag
to the NPIV's vmid_flag in the NPIV registration cmpl code path.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
VMID driver support is a load time configuration setting. Thus, change
sysfs attributes to read only.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231207224039.35466-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace literal 0x80 with PCI_HEADER_TYPE_MFD.
Link: https://lore.kernel.org/r/20231124090919.23687-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Update copyrights to 2023 for files modified in the 14.2.0.16 patch set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-10-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.2.0.16.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-9-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Typically, debugging discovery issues requires the ndlp reference count,
nlp flags, transport flags, and the io tag for root cause analysis.
Modify important discovery log messages to include one or more of these
attributes to aid in debugging and support.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-8-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A lot of repeated clean up code exists when freeing mailbox commands in
lpfc_mem_free_all().
Introduce a lpfc_mem_free_sli_mbox() helper routine to refactor the
copy-paste code. Additionally, reinitialize the mailbox command structure
context pointers to NULL in lpfc_sli4_mbox_cmd_free().
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-7-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a check in lpfc_poll_eratt() when the driver is unloading. There is no
point to check for error attention events if the driver is rmmod'ed.
If the driver is reloaded, as part of insmod initialization, then a fresh
reset is always asserted to start clean and free of error attention events.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-6-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In lpfc_check_nlp_post_devloss(), retaking of the ndlp lock in the if
statement is useless because the very next line unlocks. Simply return to
avoid relocking.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-5-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Smatch called out a warning for null checking a ptr that is assigned by
list_entry(). list_entry() does not return null and, if the list is empty,
can return an invalid ptr. Thus, the !psrp check does not execute properly.
drivers/scsi/lpfc/lpfc_els.c:2133 lpfc_cmpl_els_plogi()
warn: list_entry() does not return NULL 'prsp'
Replace list_entry() with list_get_first(), which does a list_empty() check
before returning the first entry.
Fixes: a3c3c0a806f1 ("scsi: lpfc: Validate ELS LS_ACC completion payload")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/01b7568f-4ab4-4d56-bfa6-9ecc5fc261fe@moroto.mountain/
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-4-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Because file_name and phba->ModelName are both declared a size 80 bytes,
the extra ".grp" file extension could cause an overflow into file_name.
Define a ELX_FW_NAME_SIZE macro with value 84. 84 incorporates the 4 extra
characters from ".grp". file_name is changed to be declared as a char and
initialized to zeros i.e. null chars.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-3-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, the ras_fwlog_func sysfs parameter allows users to input a value
greater than three when selecting a PCI function to enable RAS fw logging
feature.
The user's input is sanity checked in lpfc_sli4_ras_init(), but allowing an
input greater than three doesn't make sense because the max number of ports
per HBA is four.
Change the allowable range from [0, 7] to [0, 3].
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231031191224.150862-2-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Thomas Gleixner:
- Limit the hardcoded topology quirk for Hygon CPUs to those which have
a model ID less than 4.
The newer models have the topology CPUID leaf 0xB correctly
implemented and are not affected.
- Make SMT control more robust against enumeration failures
SMT control was added to allow controlling SMT at boottime or
runtime. The primary purpose was to provide a simple mechanism to
disable SMT in the light of speculation attack vectors.
It turned out that the code is sensible to enumeration failures and
worked only by chance for XEN/PV. XEN/PV has no real APIC enumeration
which means the primary thread mask is not set up correctly. By
chance a XEN/PV boot ends up with smp_num_siblings == 2, which makes
the hotplug control stay at its default value "enabled". So the mask
is never evaluated.
The ongoing rework of the topology evaluation caused XEN/PV to end up
with smp_num_siblings == 1, which sets the SMT control to "not
supported" and the empty primary thread mask causes the hotplug core
to deny the bringup of the APS.
Make the decision logic more robust and take 'not supported' and 'not
implemented' into account for the decision whether a CPU should be
booted or not.
- Fake primary thread mask for XEN/PV
Pretend that all XEN/PV vCPUs are primary threads, which makes the
usage of the primary thread mask valid on XEN/PV. That is consistent
with because all of the topology information on XEN/PV is fake or
even non-existent.
- Encapsulate topology information in cpuinfo_x86
Move the randomly scattered topology data into a separate data
structure for readability and as a preparatory step for the topology
evaluation overhaul.
- Consolidate APIC ID data type to u32
It's fixed width hardware data and not randomly u16, int, unsigned
long or whatever developers decided to use.
- Cure the abuse of cpuinfo for persisting logical IDs.
Per CPU cpuinfo is used to persist the logical package and die IDs.
That's really not the right place simply because cpuinfo is subject
to be reinitialized when a CPU goes through an offline/online cycle.
Use separate per CPU data for the persisting to enable the further
topology management rework. It will be removed once the new topology
management is in place.
- Provide a debug interface for inspecting topology information
Useful in general and extremly helpful for validating the topology
management rework in terms of correctness or "bug" compatibility.
* tag 'x86-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/apic, x86/hyperv: Use u32 in hv_snp_boot_ap() too
x86/cpu: Provide debug interface
x86/cpu/topology: Cure the abuse of cpuinfo for persisting logical ids
x86/apic: Use u32 for wakeup_secondary_cpu[_64]()
x86/apic: Use u32 for [gs]et_apic_id()
x86/apic: Use u32 for phys_pkg_id()
x86/apic: Use u32 for cpu_present_to_apicid()
x86/apic: Use u32 for check_apicid_used()
x86/apic: Use u32 for APIC IDs in global data
x86/apic: Use BAD_APICID consistently
x86/cpu: Move cpu_l[l2]c_id into topology info
x86/cpu: Move logical package and die IDs into topology info
x86/cpu: Remove pointless evaluation of x86_coreid_bits
x86/cpu: Move cu_id into topology info
x86/cpu: Move cpu_core_id into topology info
hwmon: (fam15h_power) Use topology_core_id()
scsi: lpfc: Use topology_core_id()
x86/cpu: Move cpu_die_id into topology info
x86/cpu: Move phys_proc_id into topology info
x86/cpu: Encapsulate topology information in cpuinfo_x86
...
|
|
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.2.0.15
This patch set contains error handling fixes, ELS bug fixes, and
logging improvements.
The patches were cut against Martin's 6.7/scsi-queue tree.
Link: https://lore.kernel.org/r/20231009161812.97232-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.2.0.15.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231009161812.97232-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The preexisting LOG_NODE message flag frequently spams a subset of the same
log messages during normal FC driver operations. When analyzing driver
logs, this sometimes leads to difficulty in troubleshooting.
Because LOG_IP log message flag is unused, convert it to a new
LOG_NODE_VERBOSE flag. The LOG_NODE_VERBOSE shall specifically be used for
diagnosing issues that require precise ndlp tracking detail.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231009161812.97232-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A WCQE success completion status does not guarantee valid LS_ACC receipt
for ELS commands. So, introduce a small helper routine that validates ELS
LS_ACC frames in ELS cmpl routines.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231009161812.97232-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, NPIV ports send PRLI_ACC to all received unsolicited PRLI
requests. For an NPIV port, there is no point to PRLI_ACC if the received
PRLI request has the initiator function bit set and the target function bit
unset. Modify the lpfc_rcv_prli_support_check() routine to send a PRLI_RJT
in such cases. NPIV ports are expected to send PRLI_ACC only if the Target
function bit is set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231009161812.97232-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During receipt of a hardware error attention ACQE, IOERR_SLI_DOWN status is
set by the driver for all outstanding I/Os.
In such hardware error attention cases, we can treat the situation exactly
the same as pci_channel_offline. Thus, add IOERR_SLI_DOWN status to the
same category as pci_channel_offline handling in lpfc_nvme_io_cmd_cmpl.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231009161812.97232-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
lpfc_sli4_hba_setup
In order to enter the !rc if statement block in question, rc had to have
been zero to begin with. Thus, the rc = 0 assignment is unnecessary and
can be removed.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20231009161812.97232-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use the provided topology helper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.446856860@linutronix.de
|
|
Rename it to pkg_id which is the terminology used in the kernel.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230814085112.329006989@linutronix.de
|
|
During rmmod, when dev_loss_tmo callback is called, an ndlp kref count is
decremented twice. Once for SCSI transport registration and second to
remove the initial node allocation kref. If there is also an NVMe
transport registration, another reference count decrement is expected in
lpfc_nvme_unregister_port().
Race conditions between the NVMe transport remoteport_delete and
dev_loss_tmo callbacks sometimes results in premature ndlp object release
resulting in use-after-free issues.
Fix by not dropping the ndlp object in dev_loss_tmo callback with an
outstanding NVMe transport registration. Inversely, mark the final
NLP_DROPPED flag in lpfc_nvme_unregister_port when rmmod flag is set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230908211923.37603-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When a dev_loss_tmo event occurs, an ndlp lock is taken before checking
nlp_flag for NLP_DROPPED. There is an attempt to restore the ndlp lock
when exiting the if statement, but the nlp_put kref could be the final
decrement causing a use-after-free memory access on a released ndlp object.
Instead of trying to reacquire the ndlp lock after checking nlp_flag, just
return after calling nlp_put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230908211852.37576-1-justintee8345@gmail.com
Reviewed-by: "Ewan D. Milne" <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since debugfs_create_file() returns ERR_PTR and never NULL, use IS_ERR() to
check the return value.
Fixes: 2fcbc569b9f5 ("scsi: lpfc: Make debugfs ktime stats generic for NVME and SCSI")
Fixes: 4c47efc140fa ("scsi: lpfc: Move SCSI and NVME Stats to hardware queue structures")
Fixes: 6a828b0f6192 ("scsi: lpfc: Support non-uniform allocation of MSIX vectors to hardware queues")
Fixes: 95bfc6d8ad86 ("scsi: lpfc: Make FW logging dynamically configurable")
Fixes: 9f77870870d8 ("scsi: lpfc: Add debugfs support for cm framework buffers")
Fixes: c490850a0947 ("scsi: lpfc: Adapt partitioned XRI lists to efficient sharing")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230906030809.2847970-1-ruanjinjie@huawei.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
|
|
The lpfc_vmid_host_uuid is not defined as uuid_t and its usage is not the
same as for uuid_t operations (like exporting or importing). Hence replace
call to uuid_is_null() by respective memchr_inv() without abusing casting.
With that, replace LPFC_COMPRESS_VMID_SIZE with plain number and respective
sizeof() to make code robust to changes in the future, if any.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230818155452.875781-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When preparing protection DIF I/O for DMA, the driver obtains reference
tags from scsi_prot_ref_tag(). Previously, there was a wrong assumption
that an all 0xffffffff value meant error and thus the driver failed the
I/O. This patch removes the evaluation code and accepts whatever the upper
layer returns.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230803211932.155745-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Only nodes whose state is at least past a PLOGI issue and strictly less
than a PRLI issue should be put into device recovery mode upon RSCN
receipt. Previously, the allowance of LOGO and PRLI completion states did
not make sense because those nodes should be allowed to flow through and
marked as NPort dissappeared as is normally done. A follow up RSCN GID_FT
would recover those nodes in such cases.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230804195546.157839-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update copyrights to 2023 for files modified in the 14.2.0.14 patch set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-13-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.2.0.14
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-12-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, we have dated logic to work around the differences between SLI-4
and SLI-3 resource reporting through sysfs.
Leave the SLI-3 path untouched, but for SLI4 path, retrieve resource values
from the phba->sli4_hba->max_cfg_param structure. Max values are populated
during ACQE events right after READ_CONFIG mbox cmd is sent. Instead of
the dated subtraction logic, used resource calculation is directly fed into
sysfs for display.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-11-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
During initialization, a lot of the same logic is used on MSI-X vector CPU
affinity assignment.
Create a lpfc_next_present_cpu() helper routine, and apply its usage for
refactoring purposes.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A mailbox timeout error usually indicates something has gone wrong, and a
follow up reset of the HBA is a typical recovery mechanism. Introduce a
MBX_TMO_ERR flag to detect such cases and have lpfc_els_flush_cmd abort ELS
commands if the MBX_TMO_ERR flag condition was set. This ensures all of
the registered SGL resources meant for ELS traffic are not leaked after an
HBA reset.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
LOGO
This patch provides better target rport recovery when a target rport is
running in initiator mode to discover the fabric. Such a target will issue
a LOGO before switching back to strict target mode and changes are made to
recover the login. Log messages are also updated accordingly.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Previously, Establish Image Pair was set in all PRLI_ACC responses
regardless if the received PRLI was from an initiator or target function.
Specific target vendors that can operate in both initiator and target mode,
may view the PRLI_ACC with Establish Image Pair set as an invalid service
parameter when operating in initiator only mode. This causes discovery
issues later when the target switches on its target mode function.
Revise logic that determines an rport's role as an initiator or target and
set the Establish Image Pair service parameter bit only if the Target
Function bit is set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ndlp kref count implementation in lpfc_dev_loss_tmo_callbk() removes
the initial node reference when a vport is unloading. When lpfc_cleanup()
sends a DEVICE_RM event and is in NPR state, the driver calls
lpfc_drop_node(). Subsequently, lpfc_drop_node() also removes an ndlp kref
thinking it is the initial reference. This unintentionally introduces an
extra kref decrement on the ndlp object.
Fix by using the NLP_DROPPED node flag in lpfc_dev_loss_tmo_callbk() and
lpfc_drop_node() to coordinate the removal of the initial node reference.
In lpfc_dev_loss_tmo_callbk(), remove the SCSI transport reference provided
the node is registered in the dev_loss context because the driver cannot
call the SCSI transport in dev_loss context or afterwards. And, have
lpfc_drop_node() not remove a reference if another thread is acting or has
already acted on it.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Conditionalize when to put an ndlp into recovery mode when processing
RSCNs. As long as an ndlp state is beyond a PLOGI issue and has been
mapped to a transport layer before, the ndlp qualifies to be put into
recovery mode. Otherwise, treat the ndlp rport normally through the
discovery engine.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In lpfc_cmpl_els_flogi(), the return out: label decrements the ndlp kref
signaling that FLOGI processing on the ndlp is complete. In loop topology
path, there is an unnecessary ndlp put because it also branches to the out:
label. This also signals ndlp usage completion too soon. As such, remove
the extra lpfc_nlp_put() when in loop topology.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver is reaching into a nvme_fc_cmd_iu ptr that belongs to the
transport during an abort. This could cause an unintentional ptr
dereference into memory that the driver does not own. Since the
nvme_fc_cmd_iu ptr was for logging purposes only, simplify the log message
such that the nvme_fc_cmd_iu reference is no longer needed.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The firmware diagnostic dump log message does not need to be a part of the
driver's log trace buffer because it is an expected user triggered event.
Change LOG_TRACE_EVENT verbose flag to LOG_SLI.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20230712180522.112722-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in the currently staged SCSI fixes for 6.5.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
|
|
The variable phba->fcf.fcf_flag is often protected by the lock
phba->hbalock() when is accessed. Here is an example in
lpfc_unregister_fcf_rescan():
spin_lock_irq(&phba->hbalock);
phba->fcf.fcf_flag |= FCF_INIT_DISC;
spin_unlock_irq(&phba->hbalock);
However, in the same function, phba->fcf.fcf_flag is assigned with 0
without holding the lock, and thus can cause a data race:
phba->fcf.fcf_flag = 0;
To fix this possible data race, a lock and unlock pair is added when
accessing the variable phba->fcf.fcf_flag.
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/20230630024748.1035993-1-islituo@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
|
clang points out that the lpfc_name structure has an 8-byte alignment
requirement on most architectures, but is embedded in a number of other
structures that are forced to be only 1-byte aligned:
drivers/scsi/lpfc/lpfc_hw.h:1516:30: error: field pe within 'struct lpfc_fdmi_reg_port_list' is less aligned than 'struct lpfc_fdmi_port_entry' and is usually due to 'struct lpfc_fdmi_reg_port_list' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
struct lpfc_fdmi_port_entry pe;
drivers/scsi/lpfc/lpfc_hw.h:850:19: error: field portName within 'struct _ADISC' is less aligned than 'struct lpfc_name' and is usually due to 'struct _ADISC' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
drivers/scsi/lpfc/lpfc_hw.h:851:19: error: field nodeName within 'struct _ADISC' is less aligned than 'struct lpfc_name' and is usually due to 'struct _ADISC' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
drivers/scsi/lpfc/lpfc_hw.h:922:19: error: field portName within 'struct _RNID' is less aligned than 'struct lpfc_name' and is usually due to 'struct _RNID' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
drivers/scsi/lpfc/lpfc_hw.h:923:19: error: field nodeName within 'struct _RNID' is less aligned than 'struct lpfc_name' and is usually due to 'struct _RNID' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
From the git history, I can see that all the __packed annotations were done
specifically to avoid introducing implicit padding around the lpfc_name
instances, though this was probably the wrong approach.
To improve this, only annotate the one uint64_t field inside of lpfc_name
as packed, with an explicit 4-byte alignment, as is the default already on
the 32-bit x86 ABI but not on most others. With this, the other __packed
annotations can be removed again, as this avoids the incorrect padding.
Two other structures change their layout as a result of this change:
- struct _LOGO never gained a __packed annotation even though it has the
same alignment problem as the others but is not used anywhere in the
driver today.
- struct serv_param similarly has this issue, and it is used, my guess is
that this is only an internal structure rather than part of a binary
interface, so the padding has no negative effect here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090705.2623408-1-arnd@kernel.org
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|