| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
|
|
zero-address to new port"
Xingui Yang <[email protected]> says:
This series is to solve the problem of a BUG() when adding phy with
zero address to a new port.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
As of commit 7d1d86518118 ("[SCSI] libsas: fix false positive 'device
attached' conditions"), reset the phy->entacted_sas_addr address to a
zero-address when the link rate is less than 1.5G.
Currently we find that when a new device is attached, and the link rate is
less than 1.5G, but the device type is not NO_DEVICE, for example: the link
rate is SAS_PHY_RESET_IN_PROGRESS and the device type is stp. After setting
the phy->entacted_sas_addr address to the zero address, the port will
continue to be created for the phy with the zero-address, and other phys
with the zero-address will be tried to be added to the new port:
[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device)
// phy19 is deleted but still on the parent port's phy_list
[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
Therefore, it should be the same as sas_get_phy_attached_dev(). Only when
device_type is SAS_PHY_UNUSED, sas_address is set to the 0 address.
Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions")
Signed-off-by: Xingui Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
We found that when ex_phy was attached and added to the parent wide port,
ex_phy->port was not set, resulting in sas_unregister_devs_sas_addr() not
calling sas_port_delete_phy() when deleting the phy, and the deleted phy
was still on the parent wide port's phy_list.
When we use sas_port_add_ex_phy() to set ex_phy->port to solve the above
problem, we find that after all the phys of the parent_port are removed and
the number of phy becomes 0, the parent_port will not be set to NULL. This
causes the freed parent port to be used when attaching a new ex_phy in
sas_ex_add_parent_port().
Use sas_port_add_ex_phy() instead of sas_port_add_phy() to set ex_phy->port
when ex_phy is added to the parent port, and set ex_dev->parent_port to
NULL when the number of phy on the port becomes 0.
Signed-off-by: Xingui Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Move sas_add_parent_port() to sas_expander.c and rename it to
sas_ex_add_parent_port() as it is only used in this file.
Signed-off-by: Xingui Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This moves the process of adding ex_phy to a port into a new helper.
Signed-off-by: Xingui Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Hannes Reinecke <[email protected]>
Acked-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This series [1] reduced the kmalloc() minimum alignment on arm64 to 8 bytes
(from 128). In libsas, this will cause SMP requests to be 8-byte aligned
through kmalloc() allocation. However, for hisi_sas hardware, all command
addresses must be 16-byte-aligned. Otherwise, the commands fail to be
executed.
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA
operations, so use ARCH_DMA_MINALIGN as the alignment for SMP request.
Link: https://lkml.kernel.org/r/[email protected] [1]
Signed-off-by: Yihang Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Commit b4d3ddd2df75 ("scsi: libsas: Define NCQ Priority sysfs attributes
for SATA devices") introduced support for ATA NCQ priority control for ATA
devices managed by libsas. This commit introduces the ncq_prio_supported
and ncq_prio_enable sysfs device attributes to discover and control the use
of this features, similarly to libata. However, libata publicly declares
these device attributes and export them for use in ATA low level
drivers. This leads to a compilation error when libsas and libata are
built-in due to the double definition:
ld: drivers/ata/libata-sata.o:/home/Linux/scsi/drivers/ata/libata-sata.c:900:
multiple definition of `dev_attr_ncq_prio_supported';
drivers/scsi/libsas/sas_ata.o:/home/Linux/scsi/drivers/scsi/libsas/sas_ata.c:984:
first defined here
ld: drivers/ata/libata-sata.o:/home/Linux/scsi/drivers/ata/libata-sata.c:1026:
multiple definition of `dev_attr_ncq_prio_enable';
drivers/scsi/libsas/sas_ata.o:/home/Linux/scsi/drivers/scsi/libsas/sas_ata.c:1022:
first defined here
Resolve this problem by directly declaring the libsas attributes instead of
using the DEVICE_ATTR() macro. And for good measure, the device attribute
variables are also renamed.
Reported-by: Geert Uytterhoeven <[email protected]>
Fixes: b4d3ddd2df75 ("scsi: libsas: Define NCQ Priority sysfs attributes for SATA devices")
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Igor Pylypiv <[email protected]> says:
This patch series adds ncq_prio_supported and ncq_prio_enable sysfs
attributes for libsas managed SATA devices. Existing libata sysfs
attributes cannot be used directly because the ata_port location is
different for libsas.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
libata sysfs attributes cannot be used for libsas-managed SATA devices
because the ata_port location is different for libsas.
Defined sysfs attributes (visible for SATA devices only):
- /sys/block/sda/device/ncq_prio_enable
- /sys/block/sda/device/ncq_prio_supported
The newly defined attributes will pass the correct ata_port to libata
helper functions.
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
As of commit d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to
update PHY info"), do discovery will send a new SMP_DISCOVER and update
phy->phy_change_count. We found that if the disk is reconnected and phy
change_count changes at this time, the disk scanning process will not be
triggered.
Therefore, call sas_set_ex_phy() to update the PHY info with the results of
the last query. And because the previous phy info will be used when calling
sas_unregister_devs_sas_addr(), sas_unregister_devs_sas_addr() should be
called before sas_set_ex_phy().
Fixes: d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to update PHY info")
Signed-off-by: Xingui Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Add a helper to get attached_sas_addr and device type from disc_resp.
Suggested-by: John Garry <[email protected]>
Signed-off-by: Xingui Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
sas_discover_end_dev() is defined and used only in sas_discover.c. Define
this function as static.
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
sas_set_phy_speed() is used only within sas_init.c. Declare this function
as static.
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Move the declarations of functions used only within libsas from
include/scsi/libsas.h to drivers/scsi/libsas/sas_internal.h
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull more SCSI updates from James Bottomley:
"Mostly small stragglers that missed the initial merge.
Driver updates are qla2xxx and smartpqi (mp3sas has a high diffstat
due to the volatile qualifier removal, fnic due to unused function
removal and sd.c has a lot of code shuffling to remove forward
declarations)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (38 commits)
scsi: ufs: core: No need to update UPIU.header.flags and lun in advanced RPMB handler
scsi: ufs: core: Add advanced RPMB support where UFSHCI 4.0 does not support EHS length in UTRD
scsi: mpt3sas: Remove volatile qualifier
scsi: mpt3sas: Perform additional retries if doorbell read returns 0
scsi: libsas: Simplify sas_queue_reset() and remove unused code
scsi: ufs: Fix the build for the old ARM OABI
scsi: qla2xxx: Fix unused variable warning in qla2xxx_process_purls_pkt()
scsi: fnic: Remove unused functions fnic_scsi_host_start/end_tag()
scsi: qla2xxx: Fix spelling mistake "tranport" -> "transport"
scsi: fnic: Replace sgreset tag with max_tag_id
scsi: qla2xxx: Remove unused variables in qla24xx_build_scsi_type_6_iocbs()
scsi: qla2xxx: Fix nvme_fc_rcv_ls_req() undefined error
scsi: smartpqi: Change driver version to 2.1.24-046
scsi: smartpqi: Enhance error messages
scsi: smartpqi: Enhance controller offline notification
scsi: smartpqi: Enhance shutdown notification
scsi: smartpqi: Simplify lun_number assignment
scsi: smartpqi: Rename pciinfo to pci_info
scsi: smartpqi: Rename MACRO to clarify purpose
scsi: smartpqi: Add abort handler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Fix OF include file for ata platform drivers (Rob)
- Simplify various ahci, sata and pata platform drivers using the
function devm_platform_ioremap_resource() (Yangtao)
- Cleanup libata time related argument types (e.g. timeouts values)
(Sergey)
- Cleanup libata code around error handling as all ata drivers now
define a error_handler operation (Hannes and Niklas)
- Remove functions intended for libsas that are in fact unused (Niklas)
- Change the remove device callback of platform drivers to a null
function (Uwe)
- Simplify the pata_imx driver using devm_clk_get_enabled() (Li)
- Remove old and uinused remnants of the ide code in arm, parisc,
powerpc, sparc and m68k architectures and associated drivers
(pata_buddha, pata_falcon and pata_gayle) (Geert)
- Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010
drivers (me)
- Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita,
Michael)
- Add Elkhart Lake AHCI controller support to the ahci driver (Werner)
- Disable NCQ trim on Micron 1100 drives (Pawel)
* tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits)
ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives
ata: ahci: Add Elkhart Lake AHCI controller
ata: pata_falcon: add data_swab option to byte-swap disk data
ata: pata_falcon: fix IO base selection for Q40
ata: pata_ep93xx: use soc_device_match for UDMA modes
ata: pata_ep93xx: fix error return code in probe
ata: sata_gemini: Add missing MODULE_DESCRIPTION
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
m68k: Remove <asm/ide.h>
ata: pata_gayle: Remove #include <asm/ide.h>
ata: pata_falcon: Remove #include <asm/ide.h>
ata: pata_buddha: Remove #include <asm/ide.h>
asm-generic: Remove ide_iops.h
sparc: Remove <asm/ide.h>
powerpc: Remove <asm/ide.h>
parisc: Remove <asm/ide.h>
ARM: Remove <asm/ide.h>
ata: pata_imx: Use helper function devm_clk_get_enabled()
ata: sata_rcar: Convert to platform remove callback returning void
ata: sata_mv: Convert to platform remove callback returning void
...
|
|
sas_queue_reset() is always called with param "wait" set to 0, so remove it
from this function's parameter list. Also remove unused function
sas_wait_eh().
Signed-off-by: Wenchao Hao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
John Garry <[email protected]> says:
This series tidies-up libsas a bit, including:
- delete structure(s) with only one member
- delete structure members which are only ever set
- delete structure members which are never set and code which relies on
that member being set
This conflicts with the following series:
https://lore.kernel.org/linux-scsi/[email protected]/
Any conflict should be trivial to resolve.
Based on mkp-scsi staging at a18e81d17a7e ("scsi: ufs: ufs-pci: Add support for QEMU")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Igor Pylypiv <[email protected]> says:
This patch series plumbs libata's request for a result taskfile
(ATA_QCFLAG_RESULT_TF) through libsas to pm80xx LLDD. Other libsas LLDDs
can start using the newly added return_fis_on_success as well, if needed.
For Command Duration Limits policy 0xD (command completes without an
error) libata needs FIS in order to detect the ATA_SENSE bit and read
the Sense Data for Successful NCQ Commands log (0Fh). pm80xx HBAs do
not return FIS on success by default, hence, the driver is updated to
set the RETFIS bit (Return FIS on good completion) when requested by
libsas.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Since libsas was introduced in commit 2908d778ab3e ("[SCSI] aic94xx: new
driver"), sas_ssp_task.retry_count is only ever set, so delete it.
The aic94xx driver also had its own retry_count definition in struct scb
sub-structs, which may have caused a mix-up.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Since commit 79855d178557 ("libsas: remove task_collector mode"), struct
scsi_core only contains a reference to the shost. struct scsi_core is only
used in sas_ha_struct.core, so delete scsi_core and replace with a
reference to the shost there.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
enum sas_class prob would have been useful if function sas_show_class() was
ever implemented, which it wasn't.
enum sas_class is used as asd_sas_port.class and asd_sas_phy.class, which
are only ever set, so delete these members and the enum.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Damien Le Moal <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Set return_fis_on_success when libata requests result taskfile.
For Command Duration Limits policy 0xD (command completes without
an error) libata needs FIS in order to detect the ATA_SENSE bit and
read the Sense Data for Successful NCQ Commands log (0Fh).
Signed-off-by: Igor Pylypiv <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Commit 042ebd293b86 ("scsi: libsas: kill useless ha_event and do some
cleanup") removed sas_hae_reset() but not its declaration. Commit
2908d778ab3e ("[SCSI] aic94xx: new driver") declared but never implemented
other functions.
Signed-off-by: Yue Haibing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
ata_sas_port_init() now only contains a single initialization.
Move this single initialization to ata_sas_port_alloc(), since:
1) ata_sas_port_alloc() already initializes some of the struct members.
2) ata_sas_port_alloc() is only used by libsas.
Suggested-by: John Garry <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Rename __ata_port_probe() to ata_port_probe() and drop the wrapper
ata_sas_async_probe().
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Is now a wrapper around kfree(), so call it directly.
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Callbacks are empty now, so remove them.
Also, remove the call to ap->ops->port_start() in ata_sas_port_init(),
as this would otherwise cause a NULL pointer dereference, now when the
callback is gone.
Signed-off-by: Hannes Reinecke <[email protected]>
[niklas: remove the call to ap->ops->port_start() in ata_sas_port_init()]
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
|
Commit 141f3d6256e5 ("ata: libata-sata: Fix device queue depth control")
added a struct ata_device argument to ata_change_queue_depth() to
address problems with changing the queue depth of ATA devices managed
through libsas. This was due to problems with ata_scsi_find_dev() which
are now fixed with commit 7f875850f20a ("ata: libata-scsi: Use correct
device no in ata_find_dev()").
Undo some of the changes of commit 141f3d6256e5: remove the added struct
ata_device aregument and use again ata_scsi_find_dev() to find the
target ATA device structure. While doing this, also make sure that
ata_scsi_find_dev() is called with ap->lock held, as it should.
libsas and libata call sites of ata_change_queue_depth() are updated to
match the modified function arguments.
Signed-off-by: Damien Le Moal <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
|
|
To be consistent with sas_check_edge_expander_topo(), factor out
sas_check_fanout_expander_topo(). And remove the comment since we are not
spilling over 80 colums now.
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
There is an empty "all good" branch in sas_check_parent_topology(). We can
reverse the test statement and remove the empty branch.
Moreover, factor out a helper sas_check_edge_expander_topo() to make the
code more readable.
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
In sas_check_eeds() there is an empty branch. We can reverse the test
expression and then remove the empty branch. Also the test expression is a
little bit complex so it deserves an individual function. And make the
continuing prototype lines indented after the opening parenthesis to follow
the standard coding style.
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When a disk is removed with in-flight I/O, the application needs to wait
for 30 seconds (depending on the timeout configuration) to hear back from
the kernel. Xingui tried to fix this issue by aborting the ATA link for
SATA devices[1], however this approach left the SAS devices unresolved.
Try to fix this issue by aborting all in-flight requests when the device is
gone. This is implemented by iterating over the tagset.
[1] https://lore.kernel.org/lkml/[email protected]/T/
Cc: Xingui Yang <[email protected]>
Cc: John Garry <[email protected]>
Cc: Damien Le Moal <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas).
The major core change is a rework to remove the two helpers around
scsi_execute_cmd and use it as the only submission interface along
with other minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits)
scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param()
scsi: ufs: core: Fix device management cmd timeout flow
scsi: aic94xx: Add missing check for dma_map_single()
scsi: smartpqi: Replace one-element array with flexible-array member
scsi: mpt3sas: Fix a memory leak
scsi: qla2xxx: Remove the unused variable wwn
scsi: ufs: core: Fix kernel-doc syntax
scsi: ufs: core: Add hibernation callbacks
scsi: snic: Fix memory leak with using debugfs_lookup()
scsi: ufs: core: Limit DMA alignment check
scsi: Documentation: Correct spelling
scsi: Documentation: Correct spelling
scsi: target: Documentation: Correct spelling
scsi: aacraid: Allocate cmd_priv with scsicmd
scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5
scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference
scsi: ufs: core: Enable DMA clustering
scsi: ufs: exynos: Fix the maximum segment size
scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA updates from Damien Le Moal:
- Small cleanup of the pata_octeon driver to drop a useless platform
callback (Uwe)
- Simplify ata_scsi_cmd_error_handler() code using the fact that
ap->ops->error_handler is NULL most of the time (Wenchao)
- Several patches improving libata error handling. This is in
preparation for supporting the command duration limits (CDL) feature.
The changes allow handling corner cases of ATA NCQ errors which do
not happen with regular drives but will be triggered with CDL drives
(Niklas)
- Simplify the qc_fill_rtf operation (me)
- Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES
command (me)
- Cleanup of libata FUA handling.
This falls short of enabling FUA for ATA drives that support it by
default as there were concerns that old drives would break. The
series however fixes several issues with the FUA support to ensure
that FUA is reported as being supported only for drives that can
handle all possible write cases (NCQ and non-NCQ). A check in the
block layer is also added to ensure that we never see read FUA
commands (current behavior) (me)
- Several patches to move the old PARIDE (parallel port IDE) driver to
libata as pata_parport. Given that this driver also needs protocol
modules, the driver code resides in its own pata_parport directoy
under drivers/ata (Ondrej)
* tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: Fix ida_alloc return value error check
drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport
drivers/block: Remove PARIDE core and high-level protocols
ata: pata_parport: add driver (PARIDE replacement)
ata: libata: exclude FUA support for known buggy drives
ata: libata: Fix FUA handling in ata_build_rw_tf()
ata: libata: cleanup fua support detection
ata: libata: Rename and cleanup ata_rwcmd_protocol()
ata: libata: Introduce ata_ncq_supported()
block: add a sanity check for non-write flush/fua bios
ata: libata-scsi: improve ata_scsiop_maint_in()
ata: libata-scsi: do not overwrite SCSI ML and status bytes
ata: libata: move NCQ related ATA_DFLAGs
ata: libata: respect successfully completed commands during errors
ata: libata: read the shared status for successful NCQ commands once
ata: libata: simplify qc_fill_rtf port operation interface
ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH
ata: libata-eh: Cleanup ata_scsi_cmd_error_handler()
ata: octeon: Drop empty platform remove function
|
|
This code accidentally returns success instead of -ENOMEM.
Fixes: 7cc7646b4b24 ("scsi: libsas: Factor out sas_ata_add_dev()")
Link: https://lore.kernel.org/r/Y7asLxzVwQ56G+ya@kili
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Grab the ATA port lock in sas_ata_device_link_abort() before calling
ata_link_abort() as outlined in this function's locking requirements.
Fixes: 44112922674b ("scsi: libsas: Add sas_ata_device_link_abort()")
Signed-off-by: Xingui Yang <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jason Yan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The boolean return value of the qc_fill_rtf operation is used nowhere.
Simplify this operation interface by making it a void function. All
drivers defining this operation are also updated.
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: John Garry <[email protected]>
|
|
The name ATA_QCFLAG_FAILED is misleading since it does not mean that a
QC completed in error, or that it didn't complete at all. It means that
libata decided to schedule EH for the QC, so the QC is now owned by the
libata error handler (EH).
The normal execution path is responsible for not accessing a QC owned
by EH. libata core enforces the rule by returning NULL from
ata_qc_from_tag() for QCs owned by EH.
It is quite easy to mistake that a QC marked with ATA_QCFLAG_FAILED was
an error. However, a QC that was actually an error is instead indicated
by having qc->err_mask set. E.g. when we have a NCQ error, we abort all
QCs, which currently will mark all QCs as ATA_QCFLAG_FAILED. However, it
will only be a single QC that is an error (i.e. has qc->err_mask set).
Rename ATA_QCFLAG_FAILED to ATA_QCFLAG_EH to more clearly highlight that
this flag simply means that a QC is now owned by EH. This new name will
not mislead to think that the QC was an error (which is instead
indicated by having qc->err_mask set).
This also makes it more obvious that the EH code skips all QCs that do
not have ATA_QCFLAG_EH set (rather than ATA_QCFLAG_FAILED), since the EH
code should simply only care about QCs that are owned by EH itself.
Signed-off-by: Niklas Cassel <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Jason Yan <[email protected]> says:
A few coding style fixes and cleanups. There should be no functional
changes in this series besides the debug log prints.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Factor out sas_ex_add_dev() to be consistent with sas_ata_add_dev() and
unify the error handling.
Cc: John Garry <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Factor out sas_ata_add_dev() and put it in sas_ata.c since it is a SATA
related interface. Also follow the standard coding style to define an
inline empty function when CONFIG_SCSI_SAS_ATA is not enabled.
Cc: John Garry <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The domain device 'child' is allocated in sas_ex_discover_end_dev() and
used to be added to the dev_list in this function. After the following two
fixes the device is added to the disco_list instead. As a result, the
list_del() and locking left behind is now redundant.
Fixes: 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling")
Fixes: 92625f9bff38 ("[SCSI] libsas: restore scan order")
Cc: John Garry <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The coding style where calling this interface is inconsistent with other
interfaces for SATA devices. The standard style for other SATA interfaces
is like:
#ifdefine CONFIG_SCSI_SAS_ATA
void sas_ata_task_abort(struct sas_task *task);
#else
static inline void sas_ata_task_abort(struct sas_task *task)
{
}
#endif
And the callers does not have to do things like "#ifdefine CONFIG_SCSI_SAS_ATA"
and may call the interface directly. So follow the standard style here.
Cc: John Garry <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
There is a sas_get_ata_command_set() declaration above sas_get_ata_info()
to make it compile. However, this function is defined in the same
file. Move it up to save the forward declaration.
Also remove the variable 'fis' which is not needed in this function.
Cc: John Garry <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Reviewed-by: John Garry <[email protected]>
Reviewed-by: Jack Wang <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (target, ufs, smartpqi, lpfc).
There are some core changes, mostly around reworking some of our user
context assumptions in device put and moving some code around.
The remaining updates are bug fixes and minor changes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
scsi: sg: Fix get_user() in call sg_scsi_ioctl()
scsi: megaraid_sas: Fix some spelling mistakes in comment
scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host()
scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device()
scsi: ufs: ufs-mediatek: Remove unnecessary return code
scsi: ufs: core: Fix the polling implementation
scsi: libsas: Do not export sas_ata_wait_after_reset()
scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset
scsi: libsas: Add smp_ata_check_ready_type()
scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset"
scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"
scsi: ufs: ufs-mediatek: Modify the return value
scsi: ufs: ufs-mediatek: Remove unneeded code
scsi: device_handler: alua: Call scsi_device_put() from non-atomic context
scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()"
scsi: snic: Fix possible UAF in snic_tgt_create()
scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts
scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization
scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails
scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices
...
|
|
sas_ata_wait_after_reset() does not need to be exported since it is no
longer referenced outside libsas.
Signed-off-by: Jie Zhan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|