| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_GENSECK2
IOCTL, to enable userspace to generate securekey blobs of this
type. Unfortunately, all PKEY_GENSECK2 IOCTL requests for
PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling
for PKEY_TYPE_EP11_AES in PKEY_GENSECK2 IOCTL, so that userspace can
generate securekey blobs of this type.
The start of the header and the keyblob, as well as the length need
special handling, depending on the internal keyversion. Add a helper
function that splits an uninitialized buffer into start and size of
the header as well as start and size of the payload, depending on the
requested keyversion.
Do the header-related calculations and the raw genkey request handling
in separate functions. Use the raw genkey request function for
internal purposes.
Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <[email protected]>
Reviewed-by: Ingo Franzki <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to
PKEY_TYPE_EP11. All pkeys have an internal header/payload structure,
which is opaque to the userspace. The header structures for
PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there
is no reason, why different structures are used. In preparation to fix
the keyversion handling in the broken PKEY IOCTLs, the same header
structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This
reduces the number of different code paths and increases the
readability.
Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <[email protected]>
Reviewed-by: Ingo Franzki <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk
association") introduced new logic for gendisk association, requiring
drivers to explicitly call dax_add_host() and dax_remove_host().
For dcssblk driver, some dax_remove_host() calls were missing, e.g. in
device remove path. The commit also broke error handling for out_dax case
in device add path, resulting in an extra put_device() w/o the previous
get_device() in that case.
This lead to stale xarray entries after device add / remove cycles. In the
case when a previously used struct gendisk pointer (xarray index) would be
used again, because blk_alloc_disk() happened to return such a pointer, the
xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra
put_device() in the error path. In combination with an already flawed error
handling in dcssblk (device_register() cleanup), which needs to be
addressed in a separate patch, this resulted in a missing device_del() /
klist_del(), and eventually in the kernel crash with list_add corruption on
a subsequent device_add() / klist_add().
Fix this by adding the missing dax_remove_host() calls, and also move the
put_device() in the error path to restore the previous logic.
Fixes: fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association")
Cc: <[email protected]> # 5.17+
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Gerald Schaefer <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry do the same with pfn_to_virt() reflecting the
current layout in asm-generic/page.h.
Doing this reveals a number of offenders in the arch code and
the S390-specific drivers, so just bite the bullet and fix up
all of those as well.
Signed-off-by: Linus Walleij <[email protected]>
Reviewed-by: Alexander Gordeev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Unify with the rest of the code. Use size_t for counts and ssize_t for
retval.
Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Data are now typed as u8. Propagate this change to
tty_operations::put_char().
Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Mathias Nyman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Data are now typed as u8. Propagate this change to
tty_operations::write().
Signed-off-by: "Jiri Slaby (SUSE)" <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: Johannes Berg <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Vaibhav Gupta <[email protected]>
Cc: Jens Taprogge <[email protected]>
Cc: Karsten Keil <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: David Lin <[email protected]>
Cc: Johan Hovold <[email protected]>
Cc: Alex Elder <[email protected]>
Cc: Laurentiu Tudor <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: David Sterba <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Arnaud Pouliquen <[email protected]>
Cc: Oliver Neukum <[email protected]>
Cc: Mathias Nyman <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/dsa/port.c
9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink")
a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection")
https://lore.kernel.org/all/[email protected]/
net/xdp/xsk.c
3c5b4d69c358 ("net: annotate data-races around sk->sk_mark")
b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path")
https://lore.kernel.org/all/[email protected]/
drivers/net/ethernet/broadcom/bnxt/bnxt.c
37b61cda9c16 ("bnxt: don't handle XDP in netpoll")
2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector")
fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace")
drivers/net/ethernet/sfc/selftest.c
55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest")
ae9d445cd41f ("sfc: Miscellaneous comment removals")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and wireless.
Nothing scary here. Feels like the first wave of regressions from v6.5
is addressed - one outstanding fix still to come in TLS for the
sendpage rework.
Current release - regressions:
- udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
- dsa: fix older DSA drivers using phylink
Previous releases - regressions:
- gro: fix misuse of CB in udp socket lookup
- mlx5: unregister devlink params in case interface is down
- Revert "wifi: ath11k: Enable threaded NAPI"
Previous releases - always broken:
- sched: cls_u32: fix match key mis-addressing
- sched: bind logic fixes for cls_fw, cls_u32 and cls_route
- add bound checks to a number of places which hand-parse netlink
- bpf: disable preemption in perf_event_output helpers code
- qed: fix scheduling in a tasklet while getting stats
- avoid using APIs which are not hardirq-safe in couple of drivers,
when we may be in a hard IRQ (netconsole)
- wifi: cfg80211: fix return value in scan logic, avoid page
allocator warning
- wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D
(DBDC)
Misc:
- drop handful of inactive maintainers, put some new in place"
* tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits)
MAINTAINERS: update TUN/TAP maintainers
test/vsock: remove vsock_perf executable on `make clean`
tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen
tcp_metrics: annotate data-races around tm->tcpm_net
tcp_metrics: annotate data-races around tm->tcpm_vals[]
tcp_metrics: annotate data-races around tm->tcpm_lock
tcp_metrics: annotate data-races around tm->tcpm_stamp
tcp_metrics: fix addr_same() helper
prestera: fix fallback to previous version on same major version
udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES
net/mlx5e: Set proper IPsec source port in L4 selector
net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio
net/mlx5: fs_core: Make find_closest_ft more generic
wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1()
vxlan: Fix nexthop hash size
ip6mr: Fix skb_under_panic in ip6mr_cache_report()
s390/qeth: Don't call dev_close/dev_open (DOWN/UP)
net: tap_open(): set sk_uid from current_fsuid()
net: tun_chr_open(): set sk_uid from current_fsuid()
net: dcb: choose correct policy to parse DCB_ATTR_BCN
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm80xx: Fix error return code in pm8001_pci_probe()
scsi: zfcp: Defer fc_rport blocking until after ADISC response
scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
|
|
dev_close() and dev_open() are issued to change the interface state to DOWN
or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its
Ipv6 addresses and routes. We don't want this in cases of device recovery
(triggered by hardware or software) or when the qeth device is set
offline.
Setting a qeth device offline or online and device recovery actions call
netif_device_detach() and/or netif_device_attach(). That will reset or
set the LOWER_UP indication i.e. change the dev->state Bit
__LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and
still preserves the interface settings that are handled by the network
stack.
Don't call dev_open() nor dev_close() from the qeth device driver. Let the
network stack handle this.
Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery")
Signed-off-by: Alexandra Winter <[email protected]>
Reviewed-by: Wenjia Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull block fixes from Jens Axboe:
"A few fixes that should go into the current kernel release, mainly:
- Set of fixes for dasd (Stefan)
- Handle interruptible waits returning because of a signal for ublk
(Ming)"
* tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux:
ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV
ublk: fail to recover device if queue setup is interrupted
ublk: fail to start device if queue setup is interrupted
block: Fix a source code comment in include/uapi/linux/blkzoned.h
s390/dasd: print copy pair message only for the correct error
s390/dasd: fix hanging device after request requeue
s390/dasd: use correct number of retries for ERP requests
s390/dasd: fix hanging device after quiesce/resume
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The last s390 machine that supported FDDI was z900 ('7th generation',
released in 2000). The oldest machine generation currently supported by
the Linux kernel is MARCH_Z10 (released 2008). If there is still a usecase
for connecting a Linux on s390 instance to a LAN Channel Station (LCS), it
can only do so via Ethernet.
Randy Dunlap[1] found that LCS over FDDI has never worked, when FDDI
was compiled as module. Instead of fixing that, remove the FDDI option
from the lcs driver.
While at it, make the CONFIG_LCS description a bit more helpful.
References:
[1] https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Alexandra Winter <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Storage devices are free to send RSCNs, e.g. for internal state changes. If
this happens on all connected paths, zfcp risks temporarily losing all
paths at the same time. This has strong requirements on multipath
configuration such as "no_path_retry queue".
Avoid such situations by deferring fc_rport blocking until after the ADISC
response, when any actual state change of the remote port became clear.
The already existing port recovery triggers explicitly block the fc_rport.
The triggers are: on ADISC reject or timeout (typical cable pull case), and
on ADISC indicating that the remote port has changed its WWPN or
the port is meanwhile no longer open.
As a side effect, this also removes a confusing direct function call to
another work item function zfcp_scsi_rport_work() instead of scheduling
that other work item. It was probably done that way to have the rport block
side effect immediate and synchronous to the caller.
Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors")
Cc: [email protected] #v2.6.30+
Reviewed-by: Benjamin Block <[email protected]>
Reviewed-by: Fedor Loshakov <[email protected]>
Signed-off-by: Steffen Maier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This prepares for adding DETACH ioctl for emulated VFIO devices.
Reviewed-by: Kevin Tian <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Tested-by: Terrence Xu <[email protected]>
Tested-by: Nicolin Chen <[email protected]>
Tested-by: Matthew Rosato <[email protected]>
Tested-by: Yanting Jiang <[email protected]>
Tested-by: Shameer Kolothum <[email protected]>
Tested-by: Zhenzhong Duan <[email protected]>
Signed-off-by: Yi Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
|
|
The DASD driver has certain types of requests that might be rejected by
the storage server or z/VM because they are not supported. Since the
missing support of the command is not a real issue there is no user
visible kernel error message for this.
For copy pair setups there is a specific error that IO is not allowed on
secondary devices. This error case is explicitly handled and an error
message is printed.
The code checking for the error did use a bitwise 'and' that is used to
check for specific bits. But in this case the whole sense byte has to
match.
This leads to the problem that the copy pair related error message is
erroneously printed for other error cases that are usually not reported.
This might heavily confuse users and lead to follow on actions that might
disrupt application processing.
Fix by checking the sense byte for the exact value and not single bits.
Cc: [email protected] # 6.1+
Fixes: 1fca631a1185 ("s390/dasd: suppress generic error messages for PPRC secondary devices")
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The DASD device driver has a function to requeue requests to the
blocklayer.
This function is used in various cases when basic settings for the device
have to be changed like High Performance Ficon related parameters or copy
pair settings.
The functions iterates over the device->ccw_queue and also removes the
requests from the block->ccw_queue.
In case the device is started on an alias device instead of the base
device it might be removed from the block->ccw_queue without having it
canceled properly before. This might lead to a hanging device since the
request is no longer on a queue and can not be handled properly.
Fix by iterating over the block->ccw_queue instead of the
device->ccw_queue. This will take care of all blocklayer related requests
and handle them on all associated DASD devices.
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
If a DASD request fails an error recovery procedure (ERP) request might
be built as a copy of the original request to do error recovery.
The ERP request gets a number of retries assigned.
This number is always 256 no matter what other value might have been set
for the original request. This is not what is expected when a user
specifies a certain amount of retries for the device via sysfs.
Correctly use the number of retries of the original request for ERP
requests.
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Quiesce and resume are functions that tell the DASD driver to stop/resume
issuing I/Os to a specific DASD.
On resume dasd_schedule_block_bh() is called to kick handling of IO
requests again. This does unfortunately not cover internal requests which
are used for path verification for example.
This could lead to a hanging device when a path event or anything else
that triggers internal requests occurs on a quiesced device.
Fix by also calling dasd_schedule_device_bh() which triggers handling of
internal requests on resume.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: [email protected]
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <[email protected]>
Reviewed-by: Tony Krowiak <[email protected]>
Acked-by: Jonathan Corbet <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Carstens <[email protected]>
|
|
The value of ident_map_size could never exceed the value of
vmemmap as secured by setup_kernel_memory_layout() function:
/* make sure identity map doesn't overlay with vmemmap */
ident_map_size = min(ident_map_size, vmemmap_start);
Since VMEM_MAX_PHYS macro is set to vmemmap and a newly added
range is checked against ident_map_size in add_memory_merged()
function anyway, the check against VMEM_MAX_PHYS is redundant.
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Gerald Schaefer <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Use IS_ALIGNED() instead of cumbersome bit manipulations.
Reviewed-by: Gerald Schaefer <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Remove the legacy device driver code for CEX2 and CEX3 cards.
The last machines which are able to handle CEX2 crypto cards
are z10 EC first available 2008 and z10 BC first available 2009.
The last machines able to handle a CEX3 crypto card are
z196 first available 2010 and z114 first available 2011.
Please note that this does not imply to drop CEX2 and CEX3
support in general. With older kernels on hardware up to the
aforementioned machine models these crypto cards will get
support by IBM.
The removal of the CEX2 and CEX3 device drivers code opens up
some simplifications, for example support for crypto cards
without rng support can be removed also.
Signed-off-by: Harald Freudenberger <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Enable receiving the user-defined certificates from the s390x
hypervisor via new diagnose 0x320 calls, and make them available to the
Linux root user as 'cert_store_key' type keys in a so-called
'cert_store' keyring.
New user-space interfaces:
/sys/firmware/cert_store/refresh
Writing to this attribute re-fetches certificates via DIAG 0x320
/sys/firmware/cert_store/cs_status
Reading from this attribute returns either of:
"uninitialized"
If no certificate has been retrieved yet
"ok"
If certificates have been successfully retrieved
"failed (<number>)"
If certificate retrieval failed with reason code <number>
New debug trace areas:
/sys/kernel/debug/s390dbf/cert_store_msg
/sys/kernel/debug/s390dbf/cert_store_hexdump
Usage example:
To initiate request for certificates available to the system as root:
$ echo 1 > /sys/firmware/cert_store/refresh
Upon success the '/sys/firmware/cert_store/cs_status' contains
the value 'ok'.
$ cat /sys/firmware/cert_store/cs_status
ok
Get the ID of the keyring 'cert_store':
$ keyctl search @us keyring cert_store
OR
$ keyctl link @us @s; keyctl request keyring cert_store
Obtain list of IDs of certificates:
$ keyctl rlist <cert_store keyring ID>
Display certificate content as hex-dump:
$ keyctl read <certificate ID>
Read certificate contents as binary data:
$ keyctl pipe <certificate ID> >cert_data
Display certificate description:
$ keyctl describe <certificate ID>
The certificate description has the following format:
<64 bytes certificate name in EBCDIC> ':'
<certificate index as obtained from hypervisor> ':'
<certificate store token obtained from hypervisor>
The certificate description in /proc/keys has certificate name
represented in ASCII.
Users can read but cannot update the content of the certificate.
Signed-off-by: Anastasia Eskova <[email protected]>
Reviewed-by: Peter Oberparleiter <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
The length information for available buffer space for CCA
replies is covered with two fields in the T6 header prepended
on each CCA reply: fromcardlen1 and fromcardlen2. The sum of
these both values must not exceed the AP bus limit for this
card (24KB for CEX8, 12KB CEX7 and older) minus the always
present headers.
The current code adjusted the fromcardlen2 value in case
of exceeding the AP bus limit when there was a non-zero
value given from userspace. Some tests now showed that this
was the wrong assumption. Instead the userspace value given for
this field should always be trusted and if the sum of the
two fields exceeds the AP bus limit for this card the first
field fromcardlen1 should be adjusted instead.
So now the calculation is done with this new insight in mind.
Also some additional checks for overflow have been introduced
and some comments to provide some documentation for future
maintainers of this complicated calculation code.
Furthermore the 128 bytes of fix overhead which is used
in the current code is not correct. Investigations showed
that for a reply always the same two header structs are
prepended before a possible payload. So this is also fixed
with this patch.
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Cc: [email protected]
Signed-off-by: Heiko Carstens <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, wireless and ebpf.
Current release - regressions:
- netfilter: conntrack: gre: don't set assured flag for clash entries
- wifi: iwlwifi: remove 'use_tfh' config to fix crash
Previous releases - regressions:
- ipv6: fix a potential refcount underflow for idev
- icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in
icmp6_dev()
- bpf: fix max stack depth check for async callbacks
- eth: mlx5e:
- check for NOT_READY flag state after locking
- fix page_pool page fragment tracking for XDP
- eth: igc:
- fix tx hang issue when QBV gate is closed
- fix corner cases for TSN offload
- eth: octeontx2-af: Move validation of ptp pointer before its usage
- eth: ena: fix shift-out-of-bounds in exponential backoff
Previous releases - always broken:
- core: prevent skb corruption on frag list segmentation
- sched:
- cls_fw: fix improper refcount update leads to use-after-free
- sch_qfq: account for stab overhead in qfq_enqueue
- netfilter:
- report use refcount overflow
- prevent OOB access in nft_byteorder_eval
- wifi: mt7921e: fix init command fail with enabled device
- eth: ocelot: fix oversize frame dropping for preemptible TCs
- eth: fec: recycle pages for transmitted XDP frames"
* tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
selftests: tc-testing: add test for qfq with stab overhead
net/sched: sch_qfq: account for stab overhead in qfq_enqueue
selftests: tc-testing: add tests for qfq mtu sanity check
net/sched: sch_qfq: reintroduce lmax bound check for MTU
wifi: cfg80211: fix receiving mesh packets without RFC1042 header
wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()
net: txgbe: fix eeprom calculation error
net/sched: make psched_mtu() RTNL-less safe
net: ena: fix shift-out-of-bounds in exponential backoff
netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
net/sched: flower: Ensure both minimum and maximum ports are specified
MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER
docs: netdev: update the URL of the status page
wifi: iwlwifi: remove 'use_tfh' config to fix crash
xdp: use trusted arguments in XDP hints kfuncs
bpf: cpumap: Fix memory leak in cpu_map_update_elem
wifi: airo: avoid uninitialized warning in airo_get_rate()
octeontx2-pf: Add additional check for MCAM rules
net: dsa: Removed unneeded of_node_put in felix_parse_ports_node
net: fec: use netdev_err_once() instead of netdev_err()
...
|
|
When ism_unregister_client() is called but the client still has DMBs
registered it returns -EBUSY and prints an error. This only happens
after the client has already been unregistered however. This is
unexpected as the unregister claims to have failed. Furthermore as this
implies a client bug a WARN() is more appropriate. Thus move the
deregistration after the check and use WARN().
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Previously the clients_lock was protecting the clients array against
concurrent addition/removal of clients but was also accessed from IRQ
context. This meant that it had to be a spinlock and that the add() and
remove() callbacks in which clients need to do allocation and take
mutexes can't be called under the clients_lock. To work around this these
callbacks were moved to workqueues. This not only introduced significant
complexity but is also subtly broken in at least one way.
In ism_dev_init() and ism_dev_exit() clients[i]->tgt_ism is used to
communicate the added/removed ISM device to the work function. While
write access to client[i]->tgt_ism is protected by the clients_lock and
the code waits that there is no pending add/remove work before and after
setting clients[i]->tgt_ism this is not enough. The problem is that the
wait happens based on per ISM device counters. Thus a concurrent
ism_dev_init()/ism_dev_exit() for a different ISM device may overwrite
a clients[i]->tgt_ism between unlocking the clients_lock and the
subsequent wait for the work to finnish.
Thankfully with the clients_lock no longer held in IRQ context it can be
turned into a mutex which can be held during the calls to add()/remove()
completely removing the need for the workqueues and the associated
broken housekeeping including the per ISM device counters and the
clients[i]->tgt_ism.
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The clients array references all registered clients and is protected by
the clients_lock. Besides its use as general list of clients the clients
array is accessed in ism_handle_irq() to forward ISM device events to
clients.
While the clients_lock is taken in the IRQ handler when calling
handle_event() it is however incorrectly not held during the
client->handle_irq() call and for the preceding clients[] access leaving
it unprotected against concurrent client (un-)registration.
Furthermore the accesses to ism->sba_client_arr[] in ism_register_dmb()
and ism_unregister_dmb() are not protected by any lock. This is
especially problematic as the client ID from the ism->sba_client_arr[]
is not checked against NO_CLIENT and neither is the client pointer
checked.
Instead of expanding the use of the clients_lock further add a separate
array in struct ism_dev which references clients subscribed to the
device's events and IRQs. This array is protected by ism->lock which is
already taken in ism_handle_irq() and can be taken outside the IRQ
handler when adding/removing subscribers or the accessing
ism->sba_client_arr[]. This also means that the clients_lock is no
longer taken in IRQ context.
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Signed-off-by: Niklas Schnelle <[email protected]>
Reviewed-by: Alexandra Winter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Fix virtual vs physical address confusion in vmem_add_range() and
vmem_remove_range() functions
- Include <linux/io.h> instead of <asm/io.h> and <asm-generic/io.h>
throughout s390 code
- Make all PSW related defines also available for assembler files.
Remove PSW_DEFAULT_KEY define from uapi for that
- When adding an undefined symbol the build still succeeds, but
userspace crashes trying to execute VDSO, because the symbol is not
resolved. Add undefined symbols check to prevent that
- Use kvmalloc_array() instead of kzalloc() for allocaton of 256k
memory when executing s390 crypto adapter IOCTL
- Add -fPIE flag to prevent decompressor misaligned symbol build error
with clang
- Use .balign instead of .align everywhere. This is a no-op for s390,
but with this there no mix in using .align and .balign anymore
- Filter out -mno-pic-data-is-text-relative flag when compiling kernel
to prevent VDSO build error
- Rework entering of DAT-on mode on CPU restart to use PSW_KERNEL_BITS
mask directly
- Do not retry administrative requests to some s390 crypto cards, since
the firmware assumes replay attacks
- Remove most of the debug code, which is build in when kernel config
option CONFIG_ZCRYPT_DEBUG is enabled
- Remove CONFIG_ZCRYPT_MULTIDEVNODES kernel config option and switch
off the multiple devices support for the s390 zcrypt device driver
- With the conversion to generic entry machine checks are accounted to
the current context instead of irq time. As result, the STCKF
instruction at the beginning of the machine check handler and the
lowcore member are no longer required, therefore remove it
- Fix various typos found with codespell
- Minor cleanups to CPU-measurement Counter and Sampling Facilities
code
- Revert patch that removes VMEM_MAX_PHYS macro, since it causes a
regression
* tag 's390-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (25 commits)
Revert "s390/mm: get rid of VMEM_MAX_PHYS macro"
s390/cpum_sf: remove check on CPU being online
s390/cpum_sf: handle casts consistently
s390/cpum_sf: remove unnecessary debug statement
s390/cpum_sf: remove parameter in call to pr_err
s390/cpum_sf: simplify function setup_pmu_cpu
s390/cpum_cf: remove unneeded debug statements
s390/entry: remove mcck clock
s390: fix various typos
s390/zcrypt: remove ZCRYPT_MULTIDEVNODES kernel config option
s390/zcrypt: do not retry administrative requests
s390/zcrypt: cleanup some debug code
s390/entry: rework entering DAT-on mode on CPU restart
s390/mm: fence off VM macros from asm and linker
s390: include linux/io.h instead of asm/io.h
s390/ptrace: make all psw related defines also available for asm
s390/ptrace: remove PSW_DEFAULT_KEY from uapi
s390/vdso: filter out mno-pic-data-is-text-relative cflag
s390: consistently use .balign instead of .align
s390/decompressor: fix misaligned symbol build error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, bpf and wireguard.
Current release - regressions:
- nvme-tcp: fix comma-related oops after sendpage changes
Current release - new code bugs:
- ptp: make max_phase_adjustment sysfs device attribute invisible
when not supported
Previous releases - regressions:
- sctp: fix potential deadlock on &net->sctp.addr_wq_lock
- mptcp:
- ensure subflow is unhashed before cleaning the backlog
- do not rely on implicit state check in mptcp_listen()
Previous releases - always broken:
- net: fix net_dev_start_xmit trace event vs skb_transport_offset()
- Bluetooth:
- fix use-bdaddr-property quirk
- L2CAP: fix multiple UaFs
- ISO: use hci_sync for setting CIG parameters
- hci_event: fix Set CIG Parameters error status handling
- hci_event: fix parsing of CIS Established Event
- MGMT: fix marking SCAN_RSP as not connectable
- wireguard: queuing: use saner cpu selection wrapping
- sched: act_ipt: various bug fixes for iptables <> TC interactions
- sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX
- dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging
- eth: sfc: fix null-deref in devlink port without MAE access
- eth: ibmvnic: do not reset dql stats on NON_FATAL err
Misc:
- xsk: honor SO_BINDTODEVICE on bind"
* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
nfp: clean mc addresses in application firmware when closing port
selftests: mptcp: pm_nl_ctl: fix 32-bit support
selftests: mptcp: depend on SYN_COOKIES
selftests: mptcp: userspace_pm: report errors with 'remove' tests
selftests: mptcp: userspace_pm: use correct server port
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: sockopt: use 'iptables-legacy' if available
selftests: mptcp: connect: fail if nft supposed to work
mptcp: do not rely on implicit state check in mptcp_listen()
mptcp: ensure subflow is unhashed before cleaning the backlog
s390/qeth: Fix vipa deletion
octeontx-af: fix hardware timestamp configuration
net: dsa: sja1105: always enable the send_meta options
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
net: Replace strlcpy with strscpy
pptp: Fix fib lookup calls.
mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
xsk: Honor SO_BINDTODEVICE on bind
ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
...
|
|
Change boolean parameter of function "qeth_l3_vipa_store" inside the
"qeth_l3_dev_vipa_del4_store" function from "true" to "false" because
"true" is used for adding a virtual ip address and "false" for deleting.
Fixes: 2390166a6b45 ("s390/qeth: clean up L3 sysfs code")
Reviewed-by: Alexandra Winter <[email protected]>
Reviewed-by: Wenjia Zhang <[email protected]>
Signed-off-by: Thorsten Winkler <[email protected]>
Signed-off-by: Alexandra Winter <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit 456be42aa713e7f83b467db66ceae779431c7d9d.
The assumption VMEM_MAX_PHYS should match ident_map_size
is wrong. At least discontiguous saved segments (DCSS)
could be loaded at addresses beyond ident_map_size and
dcssblk device driver might fail as result.
Reported-by: Gerald Schaefer <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
|
|
Fix various typos found with codespell.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Remove ZCRYPT_MULTIDEVNODES kernel config option and make
the dependent code always build.
The last years showed, that this option is enabled on all distros
and exploited by some features (for example CEX plugin for kubernetes).
So remove this choice as it was never used to switch off the multiple
devices support for the zcrypt device driver.
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
All kind of administrative requests should not been retried. Some card
firmware detects this and assumes a replay attack. This patch checks
on failure if the low level functions indicate a retry (EAGAIN) and
checks for the ADMIN flag set on the request message. If this both
are true, the response code for this message is changed to EIO to make
sure the zcrypt API layer does not attempt to retry the request. As of
now the ADMIN flag is set for a request message when
- for EP11 the field 'flags' of the EP11 CPRB struct has the leftmost
bit set.
- for CCA when the CPRB minor version is 'T3', 'T5', 'T6' or 'T7'.
Please note that the do-not-retry only applies to a request
which has been sent to the card (= has been successfully enqueued) but
the reply indicates some kind of failure and by default it would be
replied. It is totally fine to retry a request if a previous attempt
to enqueue the msg into the firmware queue had some kind of failure
and thus the card has never seen this request.
Reported-by: Frank Uhlig <[email protected]>
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Cc: [email protected]
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
This patch removes most of the debug code which
is build in when CONFIG_ZCRYPT_DEBUG is enabled.
There is no real exploiter for this code any more and
at least one ioctl fails with this code enabled.
The CONFIG_ZCRYPT_DEBUG kernel config option still
makes sense as some debug sysfs entries can get
enabled with this and maybe long term a new better
designed debug and error injection way will get
introduced.
This patch only removes code surrounded by the named
kernel config option. This option should by default
always be off anyway. The structs and defines removed
by the patch have been used only by code surrounded
by a CONFIG_ZCRYPT_DEBUG ifdef and thus can be removed
also.
In the end this patch removes all the failure-injection
possibilities which had been available when the kernel
had been build with CONFIG_ZCRYPT_DEBUG. It has never
been used that much and was too unflexible anyway.
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Holger Dengler <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Include linux/io.h instead of asm/io.h everywhere. linux/io.h includes
asm/io.h, so this shouldn't cause any problems. Instead this might help for
some randconfig build errors which were reported due to some undefined io
related functions.
Also move the changed include so it stays grouped together with other
includes from the same directory.
For ctcm_mpc.c also remove not needed comments (actually questions).
Acked-by: Christian Borntraeger <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm and DAX updates from Vishal Verma:
"This is mostly small cleanups and fixes, with the biggest change being
the change to the DAX fault handler allowing it to return
VM_FAULT_HWPOISON.
Summary:
- DAX fixes and cleanups including a use after free, extra
references, and device unregistration, and a redundant variable.
- Allow the DAX fault handler to return VM_FAULT_HWPOISON
- A few libnvdimm cleanups such as making some functions and
variables static where sufficient.
- Add a few missing prototypes for wrapped functions in
tools/testing/nvdimm"
* tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: enable dax fault handler to report VM_FAULT_HWPOISON
nvdimm: make security_show static
nvdimm: make nd_class variable static
dax/kmem: Pass valid argument to memory_group_register_static
fsdax: remove redundant variable 'error'
dax: Cleanup extra dax_region references
dax: Introduce alloc_dev_dax_id()
dax: Use device_unregister() in unregister_dax_mapping()
dax: Fix dax_mapping_release() use after free
tools/testing/nvdimm: Drop empty platform remove function
libnvdimm: mark 'security_show' static again
testing: nvdimm: add missing prototypes for wrapped functions
dax: fix missing-prototype warnings
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* New uvdevice secret API
* New CMM selftest
* cmm fix
* diag 9c racy access of target cpu fix
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
|
|
zcrypt_unlocked_ioctl() allocates 256k with kzalloc() which is likely to
fail if memory is fragmented. To avoid that use kvmalloc_array() instead,
like it is done at several other places for the same reason.
Reviewed-by: Harald Freudenberger <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
VMEM_MAX_PHYS is supposed to be the highest physical
address that can be added to the identity mapping.
It should match ident_map_size, which has the same
meaning. However, unlike ident_map_size it is not
adjusted against various limiting factors (see the
comment to setup_ident_map_size() function). That
renders all checks against VMEM_MAX_PHYS invalid.
Further, VMEM_MAX_PHYS is currently set to vmemmap,
which is an address in virtual memory space. However,
it gets compared against physical addresses in various
locations. That works, because both address spaces
are the same on s390, but otherwise it is wrong.
Instead of fixing VMEM_MAX_PHYS misuse and semantics
just remove it.
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix the style of protected key API driver source: use x-mas tree for
all local variable declarations
- Rework protected key API driver to not use the struct pkey_protkey
and pkey_clrkey anymore. Both structures have a fixed size buffer,
but with the support of ECC protected key these buffers are not big
enough. Use dynamic buffers internally and transparently for
userspace
- Add support for a new 'non CCA clear key token' with ECC clear keys
supported: ECC P256, ECC P384, ECC P521, ECC ED25519 and ECC ED448.
This makes it possible to derive a protected key from the ECC clear
key input via PKEY_KBLOB2PROTK3 ioctl, while currently the only way
to derive is via PCKMO instruction
- The s390 PMU of PAI crypto and extension 1 NNPA counters use atomic_t
for reference counting. Replace this with the proper data type
refcount_t
- Select ARCH_SUPPORTS_INT128, but limit this to clang for now, since
gcc generates inefficient code, which may lead to stack overflows
- Replace one-element array with flexible-array member in struct
vfio_ccw_parent and refactor the rest of the code accordingly. Also,
prefer struct_size() over sizeof() open- coded versions
- Introduce OS_INFO_FLAGS_ENTRY pointing to a flags field and
OS_INFO_FLAG_REIPL_CLEAR flag that informs a dumper whether the
system memory should be cleared or not once dumped
- Fix a hang when a user attempts to remove a VFIO-AP mediated device
attached to a guest: add VFIO_DEVICE_GET_IRQ_INFO and
VFIO_DEVICE_SET_IRQS IOCTLs and wire up the VFIO bus driver callback
to request a release of the device
- Fix calculation for R_390_GOTENT relocations for modules
- Allow any user space process with CAP_PERFMON capability read and
display the CPU Measurement facility counter sets
- Rework large statically-defined per-CPU cpu_cf_events data structure
and replace it with dynamically allocated structures created when a
perf_event_open() system call is invoked or /dev/hwctr device is
accessed
* tag 's390-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_cf: rework PER_CPU_DEFINE of struct cpu_cf_events
s390/cpum_cf: open access to hwctr device for CAP_PERFMON privileged process
s390/module: fix rela calculation for R_390_GOTENT
s390/vfio-ap: wire in the vfio_device_ops request callback
s390/vfio-ap: realize the VFIO_DEVICE_SET_IRQS ioctl
s390/vfio-ap: realize the VFIO_DEVICE_GET_IRQ_INFO ioctl
s390/pkey: add support for ecc clear key
s390/pkey: do not use struct pkey_protkey
s390/pkey: introduce reverse x-mas trees
s390/zcore: conditionally clear memory on reipl
s390/ipl: add REIPL_CLEAR flag to os_info
vfio/ccw: use struct_size() helper
vfio/ccw: replace one-element array with flexible-array member
s390: select ARCH_SUPPORTS_INT128
s390/pai_ext: replace atomic_t with refcount_t
s390/pai_crypto: replace atomic_t with refcount_t
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
|
When multiple processes mmap() a dax file, then at some point,
a process issues a 'load' and consumes a hwpoison, the process
receives a SIGBUS with si_code = BUS_MCEERR_AR and with si_lsb
set for the poison scope. Soon after, any other process issues
a 'load' to the poisoned page (that is unmapped from the kernel
side by memory_failure), it receives a SIGBUS with
si_code = BUS_ADRERR and without valid si_lsb.
This is confusing to user, and is different from page fault due
to poison in RAM memory, also some helpful information is lost.
Channel dax backend driver's poison detection to the filesystem
such that instead of reporting VM_FAULT_SIGBUS, it could report
VM_FAULT_HWPOISON.
If user level block IO syscalls fail due to poison, the errno will
be converted to EIO to maintain block API consistency.
Signed-off-by: Jane Chu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
|