aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/net
AgeCommit message (Collapse)AuthorFilesLines
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+3
Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller <[email protected]>
2020-05-13s390/ism: fix error return code in ism_probe()Wei Yongjun1-1/+3
Fix to return negative error code -ENOMEM from the smcd_alloc_dev() error handling case instead of 0, as done elsewhere in this function. Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-5/+5
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: clean up Kconfig help textJulian Wiedmann1-6/+3
Remove a stale doc link. While at it also reword the help text to get rid of an outdated marketing term. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: return error when starting a reset failsJulian Wiedmann3-16/+27
When starting the reset worker via sysfs is unsuccessful, return an error to the user. Modernize the sysfs input parsing while at it. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Alexandra Winter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: set TX IRQ marker on last buffer in a groupJulian Wiedmann1-6/+7
When qeth_flush_buffers() gets called for a group of TX buffers (currently up to 2 for OSA-style devices), the code iterates over each buffer for some final processing. During this processing, it sets the TX IRQ marker on the leading buffer rather than the last one. This can result in delayed TX completion of the trailing buffers. So pull the IRQ marker code out of the loop, and apply it to the final buffer. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: indicate contiguous TX buffer elementsJulian Wiedmann1-2/+10
The TX path usually maps the full content of a page into a buffer element. But there's specific skb layouts (ie. linearized TSO skbs) where the HW header (1) requires a separate buffer element, and (2) is page-contiguous with the packet data that's mapped into the next buffer element. Flag such buffer elements accordingly, so that HW can optimize its data access for them. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: merge TX skb mapping codeJulian Wiedmann1-37/+27
Merge the __qeth_fill_buffer() helper into its only caller. This way all mapping-related context is in one place, and we can make some more use of it in a subsequent patch. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: don't use restricted offloads for local trafficJulian Wiedmann2-4/+81
Current OSA models don't support TSO for traffic to local next-hops, and some old models didn't offer TX CSO for such packets either. So as part of .ndo_features_check, check if a packet's next-hop resides on the same OSA Adapter. Opt out from affected HW offloads accordingly. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: extract helpers for next-hop lookupJulian Wiedmann2-20/+27
These will be used in a subsequent patch. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: add debugfs file for local IP addressesJulian Wiedmann2-1/+33
For debugging purposes, provide read access to the local_addr caches via debug/qeth/<dev_name>/local_addrs. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: process local address eventsJulian Wiedmann5-0/+257
In configurations where specific HW offloads are in use, OSA adapters will raise notifications to their virtual devices about the IP addresses that currently reside on the same adapter. Cache these addresses in two RCU-enabled hash tables, and flush the tables once the relevant HW offload(s) get disabled. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-06s390/qeth: keep track of LP2LP capability for csum offloadJulian Wiedmann2-9/+17
When enabling TX CSO, make a note of whether the device has support for LP2LP offloading. This will become relevant in subsequent patches. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-04s390/qeth: fix cancelling of TX timer on dev_close()Julian Wiedmann1-5/+5
With the introduction of TX coalescing, .ndo_start_xmit now potentially starts the TX completion timer. So only kill the timer _after_ TX has been disabled. Fixes: ee1e52d1e4bb ("s390/qeth: add TX IRQ coalescing support for IQD devices") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-06s390/qdio: remove cdev from init_dataJulian Wiedmann1-2/+1
It's no longer needed. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-06s390/qdio: allow for non-contiguous SBAL array in init_dataJulian Wiedmann2-51/+13
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers() for each individual queue. But when later passing the SBAL addresses to qdio_establish(), they need to be in a single array of pointers. So if the driver uses multiple Input or Output queues, it needs to allocate a temporary array just to present all its SBAL pointers in this layout. This patch slightly changes the format of the QDIO initialization data, so that drivers can pass a per-queue array where each element points to a queue's SBAL array. zfcp doesn't use multiple queues, so the impact there is trivial. For qeth this brings a nice reduction in complexity, and removes a page-sized allocation. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-06s390/qdio: cleanly split alloc and establishJulian Wiedmann1-1/+2
All that qdio_allocate() actually uses from the init_data is the cdev, and the number of Input and Output Queues. Have the driver pass those as parameters, and defer the init_data processing into qdio_establish(). This includes writing per-device(!) trace entries, and most of the sanity checks. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-04Merge tag 's390-5.7-1' of ↵Linus Torvalds1-20/+0
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. * tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits) s390/mm: cleanup init_new_context() callback s390/mm: cleanup virtual memory constants usage s390/mm: remove page table downgrade support s390/qdio: set qdio_irq->cdev at allocation time s390/qdio: remove unused function declarations s390/ccwgroup: remove pm support s390/ap: remove power management code from ap bus and drivers s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc s390/mm: cleanup arch_get_unmapped_area() and friends s390/ism: remove pm support s390/cio: use fallthrough; s390/vfio: use fallthrough; s390/zcrypt: use fallthrough; s390: use fallthrough; s390/cpum_sf: Fix wrong page count in error message s390/diag: fix display of diagnose call statistics s390/ap: Remove ap device suspend and resume callbacks s390/pci: Improve handling of unset UID s390/pci: Fix zpci_alloc_domain() over allocation s390/qdio: pass ISC as parameter to chsc_sadc() ...
2020-03-29s390/qeth: support net namespaces for L3 devicesJulian Wiedmann1-3/+0
Enable the L3 driver's IPv4 address notifier to watch for events on qeth devices that have been moved into a net namespace. We need to program those IPs into the HW just as usual, otherwise inbound traffic won't flow. Fixes: 6133fb1aa137 ("[NETNS]: Disable inetaddr notifiers in namespaces other than initial.") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-27s390/qeth: phase out OSN supportJulian Wiedmann2-0/+4
OSN devices currently spend an awful long time in qeth_l2_set_online() until various unsupported HW cmds time out. This has been broken for over two years, ever since commit d22ffb5a712f ("s390/qeth: fix IPA command submission race") triggered a FW bug in cmd processing. Prior to commit 782e4a792147 ("s390/qeth: don't poll for cmd IO completion"), this wait for timeout would have even been spent busy-polling. The offending patch was picked up by stable and all relevant distros, and yet noone noticed. OSN setups only ever worked in combination with an out-of-tree blob, and the last machine that even offered HW with OSN support was released back in 2015. Rather than attempting to work-around this FW issue for no actual gain, add a deprecation warning so anyone who still wants to maintain this part of the code can speak up. Else rip it all out in 2021. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-27s390/qeth: make OSN / OSX support configurableJulian Wiedmann4-0/+33
The last machine generation that supports OSN is z13, and OSX is only supported up to z14. Allow users and distros to decide whether they still need support for these device types. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-27s390/qeth: remove fake_broadcast attributeJulian Wiedmann2-36/+0
Ever since commit 4a71df50047f ("qeth: new qeth device driver") introduced this attribute, it can be read & written but has no actual effect. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-27s390/ism: remove pm supportUrsula Braun1-20/+0
As s390 no longer supports ARCH_HIBERNATION_POSSIBLE, drop the unused pm ops from the ism driver. Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-03-25s390/qeth: modernize two list helpersJulian Wiedmann1-5/+3
Replace list_for_each() with list_for_each_entry(), and list_entry(head.next) with list_first_entry(). Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: keep track of fixed prio-queue configurationJulian Wiedmann3-4/+7
When a device is configured in prio-queue mode to pin all traffic onto a specific HW queue, treat this as a distinct variant of prio-queueing instead of QETH_NO_PRIO_QUEUEING. This corrects an error message from qeth_osa_set_output_queues() for devices configured in such a mode. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: fine-tune MAC Address-related errnosJulian Wiedmann1-5/+5
Return the correct errnos when .ndo_set_mac_address fails to set a new MAC address. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: add TX IRQ coalescing support for IQD devicesJulian Wiedmann3-8/+102
Since IQD devices complete (most of) their transmissions synchronously, they don't offer TX completion IRQs and have no HW coalescing controls. But we can fake the easy parts in SW, and give the user some control wrt to how often the TX NAPI code should be triggered to process the TX completions. Having per-queue controls can in particular help the dedicated mcast queue, as it likely benefits from different fine-tuning than what the ucast queues need. CC: Jakub Kicinski <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: collect more TX statisticsJulian Wiedmann3-6/+17
Count the number of TX doorbells we issue to the qdio layer. Also count the number of actual frames in a TX buffer, and then use this data along with the byte count during TX completion. We'll make additional use of the frame count in a subsequent patch. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: clean up the mac_bitsJulian Wiedmann2-8/+8
We're down to a single bit flag for MAC-address related status, reflect that in the info struct. Also set up the flag during initialization instead of clearing it during shutdown - one more little step towards unifying the shutdown code. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: simplify L3 dev_id logicJulian Wiedmann2-22/+13
The logic that deals with errors from qeth_l3_get_unique_id() is quite complex: it sets card->unique_id to 0xfffe, additionally flags it as UNIQUE_ID_NOT_BY_CARD and later takes this flag as cue to not propagate card->unique_id to dev->dev_id. With dev->dev_id thus holding 0, addrconf_ifid_eui48() applies its default behaviour. Get rid of all the special bit masks, and just return the old uid in case of an error. For the vast majority of cases this will be 0 (and so we still get the desired default behaviour) - with the rare exception where qeth_l3_get_unique_id() might have been called earlier but the initialization then failed at a later point. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qdio: extend polling support to multiple queuesJulian Wiedmann1-39/+29
When the support for polling drivers was initially added, it only considered Input Queue 0. But as QDIO interrupts are actually for the full device and not a single queue, this doesn't really fit for configurations where multiple Input Queues are used. Rework the qdio code so that interrupts for a polling driver are not split up into actions for each queue. Instead deliver the interrupt as a single event, and let the driver decide which queue needs what action. When re-enabling the QDIO interrupt via qdio_start_irq(), this means that the qdio code needs to (1) put _all_ eligible queues back into a state where they raise IRQs, (2) and afterwards check _all_ eligible queues for new work to bridge the race window. On the qeth side of things (as the only qdio polling driver), we can now add CQ polling support to the main NAPI poll routine. It doesn't consume NAPI budget, and to avoid hogging the CPU we yield control after completing one full queue worth of buffers. The subsequent qdio_start_irq() will check for any additional work, and have us re-schedule the NAPI instance accordingly. Signed-off-by: Julian Wiedmann <[email protected]> Acked-by: Heiko Carstens <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: remove redundant if-clause in RX poll codeJulian Wiedmann1-30/+26
Whenever all completed RX buffers have been processed (ie. rx->b_count == 0), we call down to the HW layer to scan for additional buffers. If no further buffers are available, the code breaks out of the while-loop. So we never reach the 'process an RX buffer' step with rx->b_count == 0, eliminate that check and one level of indentation. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: split out RX poll codeJulian Wiedmann1-21/+33
The main NAPI poll routine should eventually handle more types of work, beyond just the RX ring. Split off the RX poll logic into a separate function, and simplify the nested while-loop. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25s390/qeth: simplify RX buffer trackingJulian Wiedmann2-19/+13
Since RX buffers may contain multiple packets, qeth's NAPI poll code can exhaust its budget in the middle of an RX buffer. Thus we keep track of our current position within the active RX buffer, so we can resume processing here in the next NAPI poll period. Clean up that code by tracking the index of the active buffer element, instead of a pointer to it. Also simplify the code that advances to the next RX buffer when the current buffer has been fully processed. v2: - remove QDIO_ELEMENT_NO() macro (davem) Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: use dev->reg_stateJulian Wiedmann3-29/+17
To check whether a netdevice has already been registered, look at NETREG_REGISTERED to replace some hacks I added a while ago. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: remove gratuitous NULL checksJulian Wiedmann2-5/+0
qeth_do_ioctl() is only reached through our own net_device_ops, so we can trust that dev->ml_priv still contains what we put there earlier. qeth_bridgeport_an_set() is an internal function that doesn't require such sanity checks. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: add phys_to_virt() translation for AOBJulian Wiedmann1-3/+4
Data addresses in the AOB are absolute, and need to be translated before being fed into kmem_cache_free(). Currently this phys_to_virt() is a no-op. Also see commit 2db01da8d25f ("s390/qdio: fill SBALEs with absolute addresses"). Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: don't report hard-coded driver versionJulian Wiedmann1-1/+0
Versions are meaningless for an in-kernel driver. Instead use the UTS_RELEASE that is set by ethtool_get_drvinfo(). Cc: Leon Romanovsky <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: add SW timestamping support for IQD devicesJulian Wiedmann2-1/+17
This adds support for SOF_TIMESTAMPING_TX_SOFTWARE. No support for non-IQD devices, since they orphan the skb in their xmit path. To play nice with TX bulking, set the timestamp when the buffer that contains the skb(s) is actually flushed out to HW. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: balance the TX queue selection for IQD devicesJulian Wiedmann3-2/+46
For ucast traffic, qeth_iqd_select_queue() falls back to netdev_pick_tx(). This will potentially use skb_tx_hash() to distribute the flow over all active TX queues - so txq 0 is a valid selection, and qeth_iqd_select_queue() needs to check for this and put it on some other queue. As a result, the distribution for ucast flows is unbalanced and hits QETH_IQD_MIN_UCAST_TXQ heavier than the other queues. Open-coding a custom variant of skb_tx_hash() isn't an option, since netdev_pick_tx() also gives us eg. access to XPS. But we can pull a little trick: add a single TC class that excludes the mcast txq, and thus encourage skb_tx_hash() to not pick the mcast txq. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: allow configuration of TX queues for IQD devicesJulian Wiedmann2-4/+21
Similar to the support for z/VM NICs, but we need to take extra care about the dedicated mcast queue: 1. netdev_pick_tx() is unaware of this limitation and might select the mcast txq. Catch this. 2. require at least _two_ TX queues - one for ucast, one for mcast. 3. when reducing the number of TX queues, there's a potential race where netdev_cap_txqueue() over-rules the selected txq index and falls back to index 0. This would place ucast traffic on the mcast queue, and result in TX errors. So for IQD, reject a reduction while the interface is running. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: allow configuration of TX queues for z/VM NICsJulian Wiedmann1-0/+17
Add support for ETHTOOL_SCHANNELS to change the count of active TX queues. Since all TX queue structs are pre-allocated and -registered, we just need to trivially adjust dev->real_num_tx_queues. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: remove prio-queueing support for z/VM NICsJulian Wiedmann5-25/+49
z/VM NICs don't offer HW QoS for TX rings. So just use netdev_pick_tx() to distribute the connections equally over all enabled TX queues. We start with just 1 enabled TX queue (this matches the typical configuration without prio-queueing). A follow-on patch will allow users to enable additional TX queues. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: use memory reserves in TX slow pathJulian Wiedmann2-3/+6
When falling back to an allocation from the HW header cache, check if the skb is eligible for using memory reserves. This only makes a difference if the cache is empty and needs to be refilled. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-18s390/qeth: use memory reserves to back RX buffersJulian Wiedmann1-2/+2
Use dev_alloc_page() for backing the RX buffers with pages. This way we pick up __GFP_MEMALLOC. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller6-70/+130
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <[email protected]>
2020-03-11s390/qeth: implement smarter resizing of the RX buffer poolJulian Wiedmann4-19/+56
The RX buffer pool is allocated in qeth_alloc_qdio_queues(). A subsequent pool resizing is then handled in a very simple way: first free the current pool, then allocate a new pool of the requested size. There's two ways where this can go wrong: 1. if the resize action happens _before_ the initial pool was allocated, then a subsequent initialization will call qeth_alloc_qdio_queues() and fill the pool with a second(!) set of pages. We consume twice the planned amount of memory. This is easy to fix - just skip the resizing if the queues haven't been allocated yet. 2. if the initial pool was created by qeth_alloc_qdio_queues() but a subsequent resizing fails, then the device has no(!) RX buffer pool. The next initialization will _not_ call qeth_alloc_qdio_queues(), and attempting to back the RX buffers with pages in qeth_init_qdio_queues() will fail. Not very difficult to fix either - instead of re-allocating the whole pool, just allocate/free as many entries to match the desired size. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-11s390/qeth: refactor buffer pool codeJulian Wiedmann1-32/+51
In preparation for a subsequent fix, split out helpers to allocate/free individual pool entries. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-11s390/qeth: use page pointers to manage RX buffer poolJulian Wiedmann2-19/+18
The RX buffer elements are always backed with full pages, reflect this in the pointer type. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10s390/qeth: cancel RX reclaim work earlierJulian Wiedmann3-1/+2
When qeth's napi poll code fails to refill an entirely empty RX ring, it kicks off buffer_reclaim_work to try again later. Make sure that this worker is cancelled when setting the qeth device offline. Otherwise a RX refill action can unexpectedly end up running concurrently to bigger re-configurations (eg. resizing the buffer pool), without any locking. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.