aboutsummaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2023-01-24rtc: sun6i: Always export the internal oscillatorSamuel Holland1-12/+4
On all variants of the hardware, the internal oscillator is one possible parent for the AR100 clock. It needs to be exported so we can model that relationship correctly in the devicetree. Fixes: c56afc1844d6 ("rtc: sun6i: Expose internal oscillator through device tree") Signed-off-by: Samuel Holland <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2023-01-24rtc: brcmstb-waketimer: rename irq to wake_irqDoug Berger1-8/+7
In preparation for adding a second interrupt to service RTC interrupts, the existing interrupt is renamed from the generic 'irq' to 'wake_irq' to more clearly convey its role. It is also converted to an unsigned int. Finally, the driver message that outputs the IRQ number when registered is removed since devm_rtc_register_device() already provides a report of registration and the interrupts can be found in /proc/interrupts. Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2023-01-24rtc: brcmstb-waketimer: compensate for lack of wktmr disableDoug Berger1-18/+34
Since the WKTMR hardware block cannot be disabled it is necessary for the driver to accommodate for associated timing hazards. This commit targets the following possibilities: A possible race between clearing a wktmr event and the alarm expiring is made one-sided by setting the alarm to its maximum value before clearing the event. Programming alarm values close to the current time may not trigger events if the counter advances while the alarm is being programmed. After programming an alarm, a check is made to ensure that it is either in the future or an expiration event is pending. Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2023-01-24rtc: brcmstb-waketimer: non-functional code changesDoug Berger1-13/+12
These changes are not intended to affect functionality, but simplify the source code. They are performed here to simplify review and reduce confusion with other changes in this set. Since set_alarm includes the alarm_irq_enable functionality call it directly from that function for simplicity (even though it does nothing at the moment). The order of the declarations is changed to prevent the need for a prototype. The function device_init_wakeup() is used to replace the functions device_set_wakeup_capable() and device_wakeup_enable() since it is equivalent. Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2023-01-24rtc: brcmstb-waketimer: introduce WKTMR_ALARM_EVENT flagDoug Berger1-4/+11
This commit defines bit 0 as the bit of interest within the BRCMSTB_WKTMR_EVENT register to make the implementation more readable. Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2023-01-23rtc: sunplus: fix format string for printing resourceArnd Bergmann1-2/+2
On 32-bit architectures with 64-bit resource_size_t, sp_rtc_probe() causes a compiler warning: drivers/rtc/rtc-sunplus.c: In function 'sp_rtc_probe': drivers/rtc/rtc-sunplus.c:243:33: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] 243 | dev_dbg(&plat_dev->dev, "res = 0x%x, reg_base = 0x%lx\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The best way to print a resource is the special %pR format string, and similarly to print a pointer we can use %p and avoid the cast. Fixes: fad6cbe9b2b4 ("rtc: Add driver for RTC in Sunplus SP7021") Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann1-6/+2
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Acked-by: Miquel Raynal <[email protected]> Acked-by: Ulf Hansson <[email protected]> Acked-by: Stephen Boyd <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-09rtc: ds1307: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2023-01-09rtc: efi: Enable SET/GET WAKEUP services as optionalShanker Donthineni1-21/+27
The current implementation of rtc-efi is expecting all the 4 time services GET{SET}_TIME{WAKEUP} must be supported by UEFI firmware. As per the EFI_RT_PROPERTIES_TABLE, the platform specific implementations can choose to enable selective time services based on the RTC device capabilities. This patch does the following changes to provide GET/SET RTC services on platforms that do not support the WAKEUP feature. 1) Relax time services cap check when creating a platform device. 2) Clear RTC_FEATURE_ALARM bit in the absence of WAKEUP services. 3) Conditional alarm entries in '/proc/driver/rtc'. Cc: <[email protected]> # v6.0+ Signed-off-by: Shanker Donthineni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-21Merge tag 'mfd-next-6.2' of ↵Linus Torvalds3-158/+0
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Ampere Computing SMpro - Add support for TI TPS65219 PMIC New Functionality: - Add support for multiple devices of the same type; rk808 Fix-ups: - Convert a bunch of I2C class drivers over to .probe_new() - Remove superfluous includes; mc13xxx-*, palmas, timberdale - Use correct includes for GPIO handling; madera-core - Convert to GPIOD; twl6040 - Remove unused platform data handling; twl6040 - Device Tree changes; many - Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld - Add support for modules; palmas - Enable COMPILE_TEST support; intel_soc_pmic* - Trivial: spelling / whitespace fixes; mc13xxx-spi - Replace old PM helpers with new ones; many - Convert deprecated mask_invert usage to unmask_base; many - Use devm_*() calls; qcom_rpm - MAINTAINER fix-ups - Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc, stm32-lptimer, qcom_rpm, rohm-* Bug Fixes: - Add bounds / error checking; mt6360-core - No sleeping inside critical sections; axp20x - Fix missing dependencies; ROHM_BD957XMUF - Repair error paths; qcom-pm8008" * tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits) dt-bindings: mfd: da9062: Correct file name for watchdog mfd: pm8008: Fix return value check in pm8008_probe() mfd: rohm: Use dev_err_probe() mfd: Drop obsolete dependencies on COMPILE_TEST dt-bindings: mfd: da9062: Move IRQ to optional properties mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe() mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource() mfd: rohm-bd9576: Convert to i2c's .probe_new() mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource() dt-bindings: Fix maintainer email for a few ROHM ICs mfd: palmas: Use device_get_match_data() to simplify the code Input: Add tps65219 interrupt driven powerbutton mfd: tps65219: Add driver for TI TPS65219 PMIC mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ mfd: wcd934x: Convert irq chip to config regs mfd: tps65090: Replace irqchip mask_invert with unmask_base mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base mfd: stpmic1: Fix swapped mask/unmask in irq chip mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base ...
2022-12-15rtc: ds1742: use devm_platform_get_and_ioremap_resource()Minghao Chi1-2/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Minghao Chi <[email protected]> Signed-off-by: ye xingchen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-15rtc: mxc_v2: Add missing clk_disable_unprepare()GUO Zihua1-1/+3
The call to clk_disable_unprepare() is left out in the error handling of devm_rtc_allocate_device. Add it back. Fixes: 5490a1e018a4 ("rtc: mxc_v2: fix possible race condition") Signed-off-by: GUO Zihua <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-15rtc: rs5c313: correct some spelling mistakesZhang Jiaming1-3/+3
Change 'modifed' to 'modified'. Change 'Updata' to 'Update'. Change 'Initiatlize' to 'Initialize'. Signed-off-by: Zhang Jiaming <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-15rtc: at91rm9200: Fix syntax errors in commentsXiang wangx1-1/+1
Delete the redundant word 'is'. Signed-off-by: Xiang wangx <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-15rtc: remove duplicated words in commentsshaomin Deng3-3/+3
Signed-off-by: shaomin Deng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-15rtc: rv3028: Use IRQ flags obtained from device tree if availableWadim Egorov1-1/+12
Make the interrupt pin of the RV3028 usable with GPIO controllers without level type IRQs support, such as the TI Davinci GPIO controller. Therefore, allow the IRQ type to be passed from the device tree if available. Based on commit d4785b46345c ("rtc: pcf2127: use IRQ flags obtained from device tree if available") Signed-off-by: Wadim Egorov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-15rtc: ds1307: use sysfs_emit() to instead of scnprintf()ye xingchen1-2/+1
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: ye xingchen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-15rtc: isl12026: drop obsolete dependency on COMPILE_TESTJean Delvare1-1/+1
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by: Jean Delvare <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-11rtc: pcf85063: fix pcf85063_clkout_controlAlexandre Belloni1-1/+1
pcf85063_clkout_control reads the wrong register but then update the correct one. Reported-by: Janne Terho <[email protected]> Fixes: 8c229ab6048b ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-11rtc: rx6110: fix warning with !OFAlexandre Belloni1-1/+1
rx6110_spi_of_match is not used when !OF, leading to a warning: >> drivers/rtc/rtc-rx6110.c:384:34: warning: 'rx6110_spi_of_match' defined but not used [-Wunused-const-variable=] 384 | static const struct of_device_id rx6110_spi_of_match[] = { | ^~~~~~~~~~~~~~~~~~~ Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-11rtc: rk808: reduce 'struct rk808' usageSebastian Reichel1-27/+20
Reduce usage of 'struct rk808' (driver data of the parent MFD), so that only the chip variant field is still being accessed directly. This allows restructuring the MFD driver to support SPI based PMICs. Acked-by: Alexandre Belloni <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-11rtc: msc313: Fix function prototype mismatch in msc313_rtc_probe()Kees Cook1-11/+1
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. msc313_rtc_probe() was passing clk_disable_unprepare() directly, which did not have matching prototypes for devm_add_action_or_reset()'s callback argument. Refactor to use devm_clk_get_enabled() instead. This was found as a result of Clang's new -Wcast-function-type-strict flag, which is more sensitive than the simpler -Wcast-function-type, which only checks for type width mismatches. Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Suggested-by: Christophe JAILLET <[email protected]> Cc: Daniel Palmer <[email protected]> Cc: Romain Perier <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Alexandre Belloni <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Daniel Palmer <[email protected]> Tested-by: Daniel Palmer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-10rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()Gaosheng Cui1-4/+4
The pic32_rtc_enable(pdata, 0) and clk_disable_unprepare(pdata->clk) should be called in the error handling of devm_rtc_allocate_device(), so we should move devm_rtc_allocate_device earlier in pic32_rtc_probe() to fix it. Fixes: 6515e23b9fde ("rtc: pic32: convert to devm_rtc_allocate_device") Signed-off-by: Gaosheng Cui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-10rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()Gaosheng Cui1-0/+1
The clk_disable_unprepare() should be called in the error handling of clk_get_rate(), fix it. Fixes: b5b2bdfc2893 ("rtc: st: Add new driver for ST's LPC RTC") Signed-off-by: Gaosheng Cui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-12-07mfd: Remove dm355evm_msp driverArnd Bergmann3-158/+0
The DaVinci DM355EVM platform is gone after the removal of all unused board files, so the MTD device along with its sub-devices can be removed as well. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Bartosz Golaszewski <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-11-16rtc: pcf85063: Fix reading alarmAlexander Stein1-4/+4
If the alarms are disabled the topmost bit (AEN_*) is set in the alarm registers. This is also interpreted in BCD number leading to this warning: rtc rtc0: invalid alarm value: 2022-09-21T80:80:80 Fix this by masking alarm enabling and reserved bits. Fixes: 05cb3a56ee8c ("rtc: pcf85063: add alarm support") Signed-off-by: Alexander Stein <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-16rtc: pcf8523: fix for stop bitpaulmn1-10/+10
Bugfix for an issue detected when a goldcap capacitor gets fully discharged due to a long absence of the power supply, and then recharges again. The RTC failed to continue to keep the real-time clock. This was caused by the incorrect handling of the STOP bit in the RTC internal register. This fix solves the problem. Signed-off-by: paulmn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-16rtc: efi: Add wakeup supportRiwen Lu1-0/+2
Add wakeup support for rtc-efi, so we can wakeup from S3/S4/S5 through rtcwake. Signed-off-by: Riwen Lu <[email protected]> Link: https://lore.kernel.org/r/TYWP286MB260191455377CEBD2336557EB1659@TYWP286MB2601.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-16rtc: pcf8563: clear RTC_FEATURE_ALARM if no irqVincent Whitchurch1-0/+2
If there is no IRQ hooked up, clear RTC_FEATURE_ALARM to make the core ensure that userspace is made aware that alarms are not supported. Signed-off-by: Vincent Whitchurch <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: snvs: Allow a time difference on clock register readStefan Eichenberger1-2/+14
On an iMX6ULL the following message appears when a wakealarm is set: echo 0 > /sys/class/rtc/rtc1/wakealarm rtc rtc1: Timeout trying to get valid LPSRT Counter read This does not always happen but is reproducible quite often (7 out of 10 times). The problem appears because the iMX6ULL is not able to read the registers within one 32kHz clock cycle which is the base clock of the RTC. Therefore, this patch allows a difference of up to 320 cycles (10ms). 10ms was chosen to be big enough even on systems with less cpu power (e.g. iMX6ULL). According to the reference manual a difference is fine: - If the two consecutive reads are similar, the value is correct. The values have to be similar, not equal. Fixes: cd7f3a249dbe ("rtc: snvs: Add timeouts to avoid kernel lockups") Reviewed-by: Francesco Dolcini <[email protected]> Signed-off-by: Stefan Eichenberger <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: cmos: Disable ACPI RTC event on removalRafael J. Wysocki1-0/+15
Make cmos_do_remove() drop the ACPI RTC fixed event handler so as to prevent it from operating on stale data in case the event triggers after driver removal. Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Zhang Rui <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/2224609.iZASKD2KPV@kreacher Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: cmos: Rename ACPI-related functionsRafael J. Wysocki1-6/+6
The names of rtc_wake_setup() and cmos_wake_setup() don't indicate that these functions are ACPI-related, which is the case, and the former doesn't really reflect the role of the function. Rename them to acpi_rtc_event_setup() and acpi_cmos_wake_setup(), respectively, to address this shortcoming. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Zhang Rui <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/3225614.44csPzL39Z@kreacher Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: cmos: Eliminate forward declarations of some functionsRafael J. Wysocki1-155/+149
Reorder the ACPI-related code before cmos_do_probe() so as to eliminate excessive forward declarations of some functions. While at it, for consistency, add the inline modifier to the definitions of empty stub static funtions and remove it from the corresponding definitions of functions with non-empty bodies. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Zhang Rui <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/13157911.uLZWGnKmhe@kreacher Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: cmos: Call rtc_wake_setup() from cmos_do_probe()Rafael J. Wysocki1-16/+12
To reduce code duplication, move the invocation of rtc_wake_setup() into cmos_do_probe() and simplify the callers of the latter. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Zhang Rui <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/2143522.irdbgypaU6@kreacher Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: cmos: Call cmos_wake_setup() from cmos_do_probe()Rafael J. Wysocki1-25/+22
Notice that cmos_wake_setup() is the only user of acpi_rtc_info and it can operate on the cmos_rtc variable directly, so it need not set the platform_data pointer before cmos_do_probe() is called. Instead, it can be called by cmos_do_probe() in the case when the platform_data pointer is not set to implement the default behavior (which is to use the FADT information as long as ACPI support is enabled). Modify the code accordingly. While at it, drop a comment that doesn't really match the code it is supposed to be describing. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Zhang Rui <[email protected]> Tested-by: Zhang Rui <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/4803444.31r3eYUQgx@kreacher Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: class: Fix potential memleak in devm_rtc_allocate_device()Shang XiaoJing1-2/+2
devm_rtc_allocate_device() will alloc a rtc_device first, and then run dev_set_name(). If dev_set_name() failed, the rtc_device will memleak. Move devm_add_action_or_reset() in front of dev_set_name() to prevent memleak. unreferenced object 0xffff888110a53000 (size 2048): comm "python3", pid 470, jiffies 4296078308 (age 58.882s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 30 a5 10 81 88 ff ff .........0...... 08 30 a5 10 81 88 ff ff 00 00 00 00 00 00 00 00 .0.............. backtrace: [<000000004aac0364>] kmalloc_trace+0x21/0x110 [<000000000ff02202>] devm_rtc_allocate_device+0xd4/0x400 [<000000001bdf5639>] devm_rtc_device_register+0x1a/0x80 [<00000000351bf81c>] rx4581_probe+0xdd/0x110 [rtc_rx4581] [<00000000f0eba0ae>] spi_probe+0xde/0x130 [<00000000bff89ee8>] really_probe+0x175/0x3f0 [<00000000128e8d84>] __driver_probe_device+0xe6/0x170 [<00000000ee5bf913>] device_driver_attach+0x32/0x80 [<00000000f3f28f92>] bind_store+0x10b/0x1a0 [<000000009ff812d8>] drv_attr_store+0x49/0x70 [<000000008139c323>] sysfs_kf_write+0x8d/0xb0 [<00000000b6146e01>] kernfs_fop_write_iter+0x214/0x2d0 [<00000000ecbe3895>] vfs_write+0x61a/0x7d0 [<00000000aa2196ea>] ksys_write+0xc8/0x190 [<0000000046a600f5>] do_syscall_64+0x37/0x90 [<00000000541a336f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 24d23181e43d ("rtc: class: check return value when calling dev_set_name()") Signed-off-by: Shang XiaoJing <[email protected]> Reviewed-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: ds1347: fix value written to century registerIan Abbott1-1/+1
In `ds1347_set_time()`, the wrong value is being written to the `DS1347_CENTURY_REG` register. It needs to be converted to BCD. Fix it. Fixes: 147dae76dbb9 ("rtc: ds1347: handle century register") Cc: <[email protected]> # v5.5+ Signed-off-by: Ian Abbott <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: Include <linux/kstrtox.h> when appropriateChristophe JAILLET6-0/+6
The kstrto<something>() functions have been moved from kernel.h to kstrtox.h. So, include the latter directly in the appropriate files. Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/786421fd0435a32206288904a1f879436a717529.1667721637.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: isl12022: add support for temperature sensorRasmus Villemoes1-0/+94
The isl12022 has built-in temperature compensation effective over the range -40C to +85C. It exposes the average of the last two temperature measurements as a 10-bit value in half-Kelvins. Make this available via the hwmon framework. Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Rasmus Villemoes <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: s35390a: Remove the unneeded result variableye xingchen1-4/+2
Return the value s35390a_set_reg() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <[email protected]> Signed-off-by: ye xingchen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: fsl-ftm-alarm: Use module_platform_driver replace device_initcallZhang Jianhua1-6/+1
The ftm_rtc_driver has been registered while module init, however there is not unregister step for module exit, now use the macro module_platform_driver replace device_initcall, which can register and unregister platform driver automatically. Signed-off-by: Zhang Jianhua <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: remove davinci rtc driverArnd Bergmann3-523/+0
The Davinci dm365 SoC support was removed, so the rtc driver has no remaining users. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Bartosz Golaszewski <[email protected]> Acked-by: Marc Zyngier <[email protected]> Acked-by: Kevin Hilman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: s3c: Switch to use dev_err_probe() helperYang Yingliang1-8/+3
In the probe path, dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: ds1302: remove unnecessary spi_set_drvdata()Yang Yingliang1-6/+0
Remove unnecessary spi_set_drvdata() in ds1302_remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). After this, ds1302_remove() is an empty function, so remove it too. Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: cros-ec: Limit RTC alarm range if neededGuenter Roeck1-15/+20
RTC chips on some older Chromebooks can only handle alarms less than 24 hours in the future. Attempts to set an alarm beyond that range fails. The most severe impact of this limitation is that suspend requests fail if alarmtimer_suspend() tries to set an alarm for more than 24 hours in the future. Try to set the real-time alarm to just below 24 hours if setting it to a larger value fails to work around the problem. While not perfect, it is better than just failing the call. A similar workaround is already implemented in the rtc-tps6586x driver. Drop error messages in cros_ec_rtc_get() and cros_ec_rtc_set() since the calling code also logs an error and to avoid spurious error messages if setting the alarm ultimately succeeds. Cc: Brian Norris <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Commit: Guenter Roeck <[email protected]> Reviewed-by: Tzung-Bi Shih <[email protected]> Reviewed-by: Brian Norris <[email protected]> Tested-by: Brian Norris <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: pm8xxx: drop unused pm8018 compatibleNeil Armstrong1-1/+0
The PM8018 compatible is always used with PM8921 fallback, so PM8018 compatible can be safely removed from device ID table Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: rzn1: Check return value in rzn1_rtc_probeYushan Zhou1-1/+3
The rzn1_rtc_probe() function utilizes devm_pm_runtime_enable() but wasn't checking the return value. Fix it by adding missing check. Fixes: deeb4b5393e1 ("rtc: rzn1: Add new RTC driver") Signed-off-by: Yushan Zhou <[email protected]> Reviewed-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: rx8025: Convert to .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in .probe(). Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: rv8803: Convert to .probe_new()Uwe Kleine-König1-14/+16
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in .probe(). The device_id array has to move up for that to work. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2022-11-15rtc: rs5c372: Convert to .probe_new()Uwe Kleine-König1-5/+6
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in .probe(). Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.