| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Merge in Linux 5.18-rc5 since new code to the STM32 driver
depend in a non-trivial way on the fixes merged in -rc5.
Signed-off-by: Linus Walleij <[email protected]>
|
|
IES26 (BIT 16 of IES1_CFG_ADDR) controls the following pads:
- PAD_I2S_DATA_IN (GPIO114)
- PAD_I2S_LRCK (GPIO115)
- PAD_I2S_BCK (GPIO116)
The pinctrl table is wrong since it lists pins 114 to 112.
Update the table with the correct values.
Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC")
Reported-by: Youngmin Han <[email protected]>
Signed-off-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Set the pinctrl driver as built-in by default if
ARM64 and ARCH_MEDIATEK are enabled.
Fixes: 6cf5e9ef362a ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Fabien Parent <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Miles Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails:
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config':
pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce'
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq':
pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq'
Select EINT_MTK for PINCTRL_MTK_V2 to fix this.
Fixes: 8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module")
Signed-off-by: YueHaibing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
drivers/pinctrl/mediatek/pinctrl-mtk-common.c:171:2-3: Unneeded semicolon
Remove unneeded semicolon.
Generated by: scripts/coccinelle/misc/semicolon.cocci
Fixes: 156f721704b5 ("pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback")
CC: AngeloGioacchino Del Regno <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/20220322130308.GA21877@65fc916127a5
Signed-off-by: Linus Walleij <[email protected]>
|
|
The new MT8186 drive came in and the probe calls were
refactored at the same time. Fix it up. Fixes a build issue.
Cc: Guodong Liu <[email protected]>
Cc: AngeloGioacchino Del Regno <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
All of the MediaTek pinctrl drivers registering with pinctrl-mtk-common
that are offering a .spec_ies_smt_set() callback are declaring their
own function which is doing exactly the same on all drivers: calling
mtk_pconf_spec_set_ies_smt_range() with their struct and a simple check.
Commonize this callback by adding the ies and smt structure pointers
to struct mtk_pinctrl_devdata and changing the callback signature to
take it.
Removing the callback and checking for the existance of the spec_smt
and/or spec_ies data would allow us to staticize the function
mtk_pconf_spec_set_ies_smt_range(), but this solution was avoided as
to keep flexibility, as some SoCs may need to perform a very different
operation compared to what this commonized function is doing.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Reduce code size and duplication by using a common spec_pupd callback,
which is possible to use on all of the pinctrl drivers that are
using the v1 pinctrl-mtk-common code, with the exception of mt8135,
which has a different handling compared to the others.
Since the callback function signature was changed, this had to be
propagated to pinctrl-mt8135's spec_pull_set().
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Most of the mediatek pinctrl drivers are calling mtk_pctrl_init() and
passing only a pointer to struct mtk_pinctrl_devdata, as the regmap
handle it passed from device-tree, with the exception of mt6397.
For all of the drivers that don't require passing a struct regmap
pointer from a parent device, simplify the probe mechanism by assigning
the required structure as match data and use mtk_pctrl_common_probe()
as their probe function.
While at it, also collapse the of_device_id entries to a single line,
as they all fit in max 83 columns, which is acceptable.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
As a preparation to cleanup the probe mechanism of mediatek pinctrl
drivers that are using the v1 controller, add a common probe function
to this driver.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
All of the SoCs using Paris pinctrl are defining a custom probe
function that is simply calling mtk_paris_pinctrl_probe() passing
a pointer to the SoC specific mtk_pin_soc structure and nothing else.
Simplify the probe mechanism across all pinctrl drivers that are
using pinctrl-paris by passing the specific mtk_pin_soc as match
data and using function mtk_paris_pinctrl_probe as a common probe
function for all of them.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Some of the MediaTek chips that utilize the Paris pinctrl driver library
support a lower drive strength (<= 1mA) than the standard drive strength
settings (2~16 mA) on certain pins. This was previously supported by the
custom MTK_PIN_CONFIG_DRV_ADV parameter along with the
"mediatek,drive-strength-adv" device tree property.
The drive strength values for this hardware are 125, 250, 500, and 1000 mA,
and can be readily described by the existing "drive-strength-microamp"
property, which then gets parsed by the generic pinconf library into the
parameter PIN_CONFIG_DRIVE_STRENGTH_UA.
Add support for PIN_CONFIG_DRIVE_STRENGTH_UA while keeping the old
custom parameter around for backward compatibility.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
The current code deals with optional features by testing for the
function pointers and returning -ENOTSUPP if it is not valid. This is
done for multiple pin config settings and results in the code that
handles the supporting cases to get indented by one level. This is
aggrevated by the fact that some features require another level of
conditionals.
Instead of assigning the same error code in all unsupported optional
feature cases, simply have that error code as the default, and break
out of the switch/case block whenever a feature is unsupported, or an
error is returned. This reduces indentation by one level for the useful
code.
Also replace the goto statements with break statements. The result is
the same, as the gotos simply exit the switch/case block, which can
also be achieved with a break statement. With the latter the intent
is clear and easier to understand.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Virtual GPIOs do not have any hardware state associated with them. Any
attempt to read back hardware state for these pins result in error
codes.
Skip dumping extra pin config information for these virtual GPIOs.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
The caller of mtk_pctrl_show_one_pin() is responsible for printing the
full line. mtk_pctrl_show_one_pin(), called through mtk_pctrl_dbg_show(),
should only produce a string containing the extra information the driver
wants included.
Drop the extra newlines. Also unbreak the line that is only slightly
over 80 characters to make it easier on the eye, and get rid of the
braces now that each block in the conditionals is just one line.
Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.
Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.
Also drop the assignment of pin config state to the group.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.
Change the type to u32, which matches the return type of
pinconf_to_config_argument().
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.
Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Change "mediatek,rsel_resistance_in_si_unit" to "mediatek,rsel-resistance-in-si-unit"
Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Guodong Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
This commit includes pinctrl driver for mt8186.
Signed-off-by: Guodong Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control bulk updates from Linus Walleij:
"Core changes:
- New standard enumerator and corresponding device tree bindings for
output impedance pin configuration. (Implemented and used in the
Renesas rzg2l driver.)
- Cleanup of Kconfig and Makefile to be somewhat orderly and
alphabetic.
New drivers:
- Samsung Exynos 7885 pin controller.
- Ocelot LAN966x pin controller.
- Qualcomm SDX65 pin controller.
- Qualcomm SM8450 pin controller.
- Qualcomm PM8019, PM8226 and PM2250 pin controllers.
- NXP/Freescale i.MXRT1050 pin controller.
- Intel Thunder Bay pin controller.
Enhancements:
- Introduction of the string library helper function
"kasprintf_strarray()" and subsequent use in Rockchip, ST and
Armada pin control drivers, as well as the GPIO mockup driver.
- The Ocelot pin controller has been extensively rewritten to use
regmap and other modern kernel infrastructure.
- The Microchip SGPIO driver has been converted to use regmap.
- The SPEAr driver had been converted to use regmap.
- Substantial cleanups and janitorial on the Apple pin control driver
that was merged for v5.16.
- Janitorial to remove of_node assignments in the GPIO portions that
anyway get this handled in the GPIO core.
- Minor cleanups and improvements in several pin controllers"
* tag 'pinctrl-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (98 commits)
pinctrl: imx: fix assigning groups names
dt-bindings: pinctrl: mt8195: add wrapping node of pin configurations
pinctrl: bcm: ns: use generic groups & functions helpers
pinctrl: imx: fix allocation result check
pinctrl: samsung: Use platform_get_irq_optional() to get the interrupt
pinctrl: Propagate firmware node from a parent device
dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
pinctrl: add one more "const" for generic function groups
pinctrl: keembay: rework loops looking for groups names
pinctrl: keembay: comment process of building functions a bit
pinctrl: imx: prepare for making "group_names" in "function_desc" const
ARM: dts: gpio-ranges property is now required
pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED
pinctrl: Get rid of duplicate of_node assignment in the drivers
pinctrl-sunxi: don't call pinctrl_gpio_direction()
pinctrl-bcm2835: don't call pinctrl_gpio_direction()
pinctrl: bcm2835: Silence uninit warning
pinctrl: Sort Kconfig and Makefile entries alphabetically
pinctrl: Add Intel Thunder Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver
...
|
|
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.
For the details one may look into the of_gpio_dev_init() implementation.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
All the other mtk_hw_get_value() calls have a check for "if (err)" so
we can add one here as well. This silences a Smatch warning:
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:819 mtk_pinconf_bias_get_rsel()
error: uninitialized symbol 'pd'.
Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20211127140836.GB24002@kili
Signed-off-by: Linus Walleij <[email protected]>
|
|
The "try_all_type" variable is not set if (hw->soc->pull_type) is false
leading to the following Smatch warning:
drivers/pinctrl/mediatek/pinctrl-paris.c:599 mtk_pctrl_show_one_pin()
error: uninitialized symbol 'try_all_type'.
Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20211127140750.GA24002@kili
Signed-off-by: Linus Walleij <[email protected]>
|
|
When eint virtual eint number is greater than gpio number,
it maybe produce 'desc[eint_n]' size globle-out-of-bounds issue.
Signed-off-by: Guodong Liu <[email protected]>
Signed-off-by: Zhiyong Tao <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
This commit includes pinctrl driver for Mediatek MT7986
The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <[email protected]>
Acked-by: Sean Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
I2C pins's resistance value can be controlled by rsel register.
This patch provides rsel (resistance selection) setting on MT8195
Signed-off-by: Zhiyong Tao <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
This patch supports rsel(resistance selection) feature for I2C pins.
It provides more resistance selection solution in different ICs.
It provides rsel define and si unit solution by identifying
"mediatek,rsel_resistance_in_si_unit" property in pio dtsi node.
Signed-off-by: Zhiyong Tao <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Fix Camel spelling coding style to avoid checkpatch
warning in a following patch.
Signed-off-by: Zhiyong Tao <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Setting this up will configure wake from suspend properly,
and wake only for the interrupts that are setup in wake_mask,
not all interrupts.
Fixes: 6cf5e9ef362af824de2e4e8afb78d74537f1e3db ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Zhiyong Tao <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Certain SoC are missing the middle part gpios in consecutive pins,
it's better to check if mtk_pin_desc is a valid pin for the extensibility
Signed-off-by: Sam Shih <[email protected]>
Acked-by: Sean Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.15 kernel cycle, no
core changes at all this time, just driver work!
New drivers:
- New subdriver for Intel Keem Bay (an ARM-based SoC)
- New subdriver for Qualcomm MDM9607 and SM6115
- New subdriver for ST Microelectronics STM32MP135
- New subdriver for Freescale i.MX8ULP ("Ultra Low Power")
- New subdriver for Ingenic X2100
- Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO
- Support Samsung Exynos850
- Support Renesas RZ/G2L
Enhancements:
- A major refactoring of the Rockchip driver, breaking part of it out
to a separate GPIO driver in drivers/gpio
- Pin bias support on Renesas r8a77995
- Add SCI pins support to Ingenic JZ4755 and JZ4760
- Mediatek device tree bindings converted to YAML"
* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
pinctrl: samsung: Add Exynos850 SoC specific data
dt-bindings: pinctrl: samsung: Add Exynos850 doc
MAINTAINERS: Add maintainers for amd-pinctrl driver
pinctrl: Add Intel Keem Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
dt-bindings: mediatek: convert pinctrl to yaml
arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
pinctrl: ingenic: Add .max_register in regmap_config
pinctrl: ingenic: Fix bias config for X2000(E)
pinctrl: ingenic: Fix incorrect pull up/down info
pinctrl: Ingenic: Add pinctrl driver for X2100.
dt-bindings: pinctrl: Add bindings for Ingenic X2100.
pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
pinctrl: Ingenic: Improve the code.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates to the interrupt core and driver subsystems:
Core changes:
- The usual set of small fixes and improvements all over the place,
but nothing stands out
MSI changes:
- Further consolidation of the PCI/MSI interrupt chip code
- Make MSI sysfs code independent of PCI/MSI and expose the MSI
interrupts of platform devices in the same way as PCI exposes them.
Driver changes:
- Support for ARM GICv3 EPPI partitions
- Treewide conversion to generic_handle_domain_irq() for all chained
interrupt controllers
- Conversion to bitmap_zalloc() throughout the irq chip drivers
- The usual set of small fixes and improvements"
* tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
platform-msi: Add ABI to show msi_irqs of platform devices
genirq/msi: Move MSI sysfs handling from PCI to MSI core
genirq/cpuhotplug: Demote debug printk to KERN_DEBUG
irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy
irqdomain: Export irq_domain_disconnect_hierarchy()
irqchip/gic-v3: Fix priority comparison when non-secure priorities are used
irqchip/apple-aic: Fix irq_disable from within irq handlers
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
genirq: Fix kernel doc indentation
EDAC/altera: Convert to generic_handle_domain_irq()
powerpc: Bulk conversion to generic_handle_domain_irq()
nios2: Bulk conversion to generic_handle_domain_irq()
...
|
|
Wherever possible, replace constructs that match either
generic_handle_irq(irq_find_mapping()) or
generic_handle_irq(irq_linear_revmap()) to a single call to
generic_handle_domain_irq().
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
|
|
drivers/pinctrl/mediatek/pinctrl-mt8365.c:488:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC")
CC: Fabien Parent <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/20210626051550.GA37544@d0c207d51ce8
Signed-off-by: Linus Walleij <[email protected]>
|
|
Some pin doesn't support PUPD register, if it fails and fallbacks with
bias_set_combo case, it will call mtk_pinconf_bias_set_pupd_r1_r0() to
modify the PUPD pin again.
Since the general bias set are either PU/PD or PULLSEL/PULLEN, try
bias_set or bias_set_rev1 for the other fallback case. If the pin
doesn't support neither PU/PD nor PULLSEL/PULLEN, it will return
-ENOTSUPP.
Fixes: 81bd1579b43e ("pinctrl: mediatek: Fix fallback call path")
Signed-off-by: Hsin-Yi Wang <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Zhiyong Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Pin modes are encoded in the SoC data structure. Use that value to set
IES SMT.
Cc: Fabien Parent <[email protected]>
Cc: Sean Wang <[email protected]>
Cc: Mattijs Korpershoek <[email protected]>
Cc: [email protected]
Fixes: 696beef77521 ("pinctrl: mediatek: move bit assignment")
Signed-off-by: Matthias Brugger <[email protected]>
Signed-off-by: Matthias Brugger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
This SoC needs to select PINCTRL_MTK or we can end up in
kernel compiles that miss some symbols.
Cc: Fabien Parent <[email protected]>
Reported-by: kernel test robot <[email protected]>
Fixes: e94d8b6fb83a ("pinctrl: mediatek: add support for mt8365 SoC")
Signed-off-by: Linus Walleij <[email protected]>
|
|
The bit needs offset to be defined which happens some lines
below. Looks like a bug. The kernel test robot complains:
drivers/pinctrl/mediatek/pinctrl-mtk-common.c:137:12:
warning: variable 'offset' is uninitialized when used here [-Wuninitialized]
bit = BIT(offset & pctl->devdata->mode_mask);
^~~~~~
Fix it up by reverting to what was done before.
Cc: Fabien Parent <[email protected]>
Cc: Sean Wang <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Mattijs Korpershoek <[email protected]>
Cc: [email protected]
Fixes: 9f940d8ecf92 ("pinctrl: mediatek: don't hardcode mode encoding in common code")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
Add pinctrl driver for MT8365 SoC.
Signed-off-by: Fabien Parent <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
MT8365 encode the pins mode differently than other
MTK pinctrl drivers that use the PINCTRL_MTK common code.
Add 3 new fields in mtk_pinctrl_devdata in order to store how
pin modes are encoded into the register. At the
same time update all the pinctrl driver that depends on
CONFIG_PINCTRL_MTK.
Signed-off-by: Fabien Parent <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Commit 42a46434e9b1 ("pinctrl: add lock in mtk_rmw function.") uses
mutex lock in mtk_rmw. However the function is possible called from
atomic context.
For example call trace:
mutex_lock+0x28/0x64
mtk_rmw+0x38/0x80
[snip]
max98357a_daiops_trigger+0x8c/0x9c
soc_pcm_trigger+0x5c/0x10c
The max98357a_daiops_trigger() could run in either atomic or non-atomic
context. As a result, dmesg shows some similar messages: "BUG: sleeping
function called from invalid context at kernel/locking/mutex.c:254".
Uses spin lock in mtk_rmw instead.
Fixes: 42a46434e9b1 ("pinctrl: add lock in mtk_rmw function.")
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
This patch provides the advanced drive raw data setting version
for I2C used pins on MT8195.
Signed-off-by: Zhiyong Tao <[email protected]>
Acked-by: Sean Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
This commit includes pinctrl driver for mt8195.
Signed-off-by: Zhiyong Tao <[email protected]>
Acked-by: Sean Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
When multiple threads operate on the same register resource
which include multiple pin, It will make the register resource
wrong to control. So we add lock to avoid the case.
Signed-off-by: Zhiyong Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.12 kernel.
This time a calm set with no core changes.
New drivers/subdrivers:
- Renesas R8A7790A0 pin controller.
- Allwinner H616 and H616-R pin controllers.
- Qualcomm SM8350 and SC8180x pin controllers.
Improvements:
- Redo the DT bindings for Ralink RT2880.
- A common Qualcomm TLMM DT binding in YAML.
- Delete the unused drivers for U300, COH901, Sirf Atlas, and ZTE ZX"
* tag 'pinctrl-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
pinctrl: mediatek: Fix trigger type setting follow for unexpected interrupt
dt-bindings: pinctrl: Group tuples in pin control properties
pinctrl: nuvoton: npcm7xx: Fix alignment of table header comment
pinctrl: at91-pio4: fix "Prefer 'unsigned int' to bare use of 'unsigned'"
pinctrl: at91-pio4: add support for slew-rate
dt-bindings: pinctrl: at91-pio4: add slew-rate
pinctrl: actions: Add depends on || COMPILE_TEST
pinctrl: single: set function name when adding function
pinctrl: qcom: Add sc8180x TLMM driver
dt-bindings: pinctrl: qcom: Add sc8180x binding
dt-bindings: pinctrl: qcom: Define common TLMM binding
pinctrl: qcom: Add SM8350 pinctrl driver
dt-bindings: pinctrl: qcom: Add SM8350 pinctrl bindings
pinctrl: samsung: use raw_spinlock for s3c64xx
dt-bindings: mediatek: mt8192: Fix dt_binding_check warning
pinctrl: qcom: spmi-mpp: Add PM8019 compatible
pinctrl: pinmux: add function selector to pinmux-functions
pinctrl: samsung: use raw_spinlock for locking
pinctrl: clarify #pinctrl-cells for pinctrl-single,pins
pinctrl: actions: Add the platform dependency to drivers
...
|