aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2020-09-17PCI/IOV: Simplify pci-pf-stub with module_pci_driver()Liu Shixin1-13/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init() and module_exit() calls. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Liu Shixin <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Alexander Duyck <[email protected]>
2020-09-17PCI/ACPI: Add Ampere Altra SOC MCFG quirkTuan Phan1-0/+10
Ampere Altra SOC supports only 32-bit ECAM reads. Add an MCFG quirk for the platform. Link: https://lore.kernel.org/r/1596751055-12316-1-git-send-email-tuanphan@os.amperecomputing.com Signed-off-by: Tuan Phan <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-09-17PCI: Add schedule point in pci_read_config()Jiang Biao1-0/+1
The PCI sysfs "config" file allows large reads, and the resulting PCI config reads can take several milliseconds to complete. Testing with the cyclictest [1] benchmark showed 5ms+ latencies. Add a schedule point in pci_read_config() to reduce the maximum latency. [1] https://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git/ [bhelgaas: commit log] Link: https://lore.kernel.org/r/[email protected] Reported-by: Bin Lai <[email protected]> Signed-off-by: Jiang Biao <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-09-17PCI: brcmstb: Add bcm7278 PERST# supportJim Quinlan1-28/+69
The PERST# bit was moved to a different register in 7278-type STB chips. In addition, the polarity of the bit was also changed; for other chips writing a 1 specified assert; for 7278-type chips, writing a 0 specifies assert. Of course, PERST# is a PCIe asserted-low signal. While we are here, also change the bridge_sw_init_set() functions so like the perst_set() functions they are chip specific and we no longer rely on data wrt chip specific field mask and shift values. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jim Quinlan <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Florian Fainelli <[email protected]>
2020-09-17PCI: brcmstb: Add suspend and resume pm_opsJim Quinlan1-0/+47
Broadcom Set-top (BrcmSTB) boards typically support S2, S3, and S5 suspend and resume. Now the PCIe driver may do so as well. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jim Quinlan <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Florian Fainelli <[email protected]>
2020-09-17PCI: brcmstb: Add bcm7278 register infoJim Quinlan1-12/+93
Add in compatibility strings and code for three Broadcom STB chips. Some of the register locations, shifts, and masks are different for certain chips, requiring the use of different constants based on of_id. We would like to add the following at this time to the match list but we need to wait until the end of this patchset so that everything works. { .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg }, { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg }, { .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg }, { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg }, Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jim Quinlan <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Florian Fainelli <[email protected]> Acked-by: Rob Herring <[email protected]>
2020-09-17PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTBJim Quinlan1-1/+2
Have PCIE_BRCMSTB depend on ARCH_BRCMSTB. Also set the default value to ARCH_BRCMSTB. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jim Quinlan <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Florian Fainelli <[email protected]>
2020-09-16PCI/ACS: Enable Translation Blocking for external devicesRajat Jain2-0/+14
Translation Blocking is a required feature for Downstream Ports (Root Ports or Switch Downstream Ports) that implement ACS. When enabled, the Port checks the Address Type (AT) of each upstream Memory Request it receives. The default AT (00b) means "untranslated" and the IOMMU can decide whether to treat the address as I/O virtual or physical. If AT is not the default, i.e., if the Memory Request contains an already-translated (physical) address, the Port blocks the request and reports an ACS error. When enabling ACS, enable Translation Blocking for external-facing ports and untrusted (external) devices. This is to help prevent attacks from external devices that initiate DMA with physical addresses that bypass the IOMMU. [bhelgaas: commit log, simplify setting bit and drop warning; TB is required for Downstream Ports with ACS, so we should never see the warning] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rajat Jain <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-09-16PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectableThomas Gleixner3-1/+8
The arch_.*_msi_irq[s] fallbacks are compiled in whether an architecture requires them or not. Architectures which are fully utilizing hierarchical irq domains should never call into that code. It's not only architectures which depend on that by implementing one or more of the weak functions, there is also a bunch of drivers which relies on the weak functions which invoke msi_controller::setup_irq[s] and msi_controller::teardown_irq. Make the architectures and drivers which rely on them select them in Kconfig and if not selected replace them by stub functions which emit a warning and fail the PCI/MSI interrupt allocation. Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16PCI/MSI: Provide pci_dev_has_special_msi_domain() helperThomas Gleixner1-0/+22
Provide a helper function to check whether a PCI device is handled by a non-standard PCI/MSI domain. This will be used to exclude such devices which hang of a special bus, e.g. VMD, to be excluded from the irq domain override in irq remapping. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSIThomas Gleixner1-0/+6
Devices on the VMD bus use their own MSI irq domain, but it is not distinguishable from regular PCI/MSI irq domains. This is required to exclude VMD devices from getting the irq domain pointer set by interrupt remapping. Override the default bus token. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Acked-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16x86/msi: Use generic MSI domain opsThomas Gleixner2-13/+1
pci_msi_get_hwirq() and pci_msi_set_desc are not longer special. Enable the generic MSI domain ops in the core and PCI MSI code unconditionally and get rid of the x86 specific implementations in the X86 MSI code and in the hyperv PCI driver. Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16x86/msi: Consolidate MSI allocationThomas Gleixner1-1/+1
Convert the interrupt remap drivers to retrieve the pci device from the msi descriptor and use info::hwirq. This is the first step to prepare x86 for using the generic MSI domain ops. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Wei Liu <[email protected]> Acked-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16PCI/MSI: Rework pci_msi_domain_calc_hwirq()Thomas Gleixner1-5/+4
Retrieve the PCI device from the msi descriptor instead of doing so at the call sites. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Bjorn Helgaas <[email protected]> Acked-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16PCI: vmd: Dont abuse vector irqomain as parentThomas Gleixner1-1/+2
VMD has it's own PCI/MSI interrupt domain which is not in any way depending on the x86 vector domain. PCI devices behind VMD share the VMD MSIX vector entries via a VMD specific message translation to the actual VMD MSIX vector. The VMD device interrupt handler for the VMD MSIX vectors invokes all interrupt handlers of the devices which share a vector. Making the x86 vector domain the actual parent of the VMD irq domain is pointless and actually counterproductive. When a device interrupt is requested then it will activate the interrupt which traverses down the hierarchy and consumes an interrupt vector in the vector domain which is never used. The domain is self contained and has no parent dependencies, so just hand in NULL for the parent and be done with it. Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16PCI: hip: Add handling of HiSilicon HIP PCIe controller errorsYicong Yang3-0/+335
The HiSilicon HIP PCIe controller is capable of handling errors on root port and performing port reset separately at each root port. Add error handling driver for HIP PCIe controller to log and report recoverable errors. Perform root port reset and restore link status after the recovery. Following are some of the PCIe controller's recoverable errors 1. completion transmission timeout error. 2. CRS retry counter over the threshold error. 3. ECC 2 bit errors 4. AXI bresponse/rresponse errors etc. The driver placed in the drivers/pci/controller/ because the HIP PCIe controller does not use DWC IP. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yicong Yang <[email protected]> Signed-off-by: Shiju Jose <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Bjorn Helgaas <[email protected]>
2020-09-10PCI: dwc: Use DBI accessorsRob Herring2-10/+8
Convert the remaining cases of register accesses using dbi_base rather than dw_pcie_(read|write)[bwl]_dbi accessors. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: [email protected]
2020-09-10PCI: dwc: Move N_FTS setup to common setupRob Herring5-85/+35
The Designware controller has common registers to set number of fast training sequence ordered sets. The Artpec6, Intel, and Tegra driver initialize these register fields. Let's move the initialization to the common setup code and drivers just have to provide the value. There's a slight change in that the common clock mode N_FTS field is now initialized. Previously only the Intel driver set this. It's not clear from the code if common clock mode is used in the Artpec6 or Tegra driver. It depends on the DWC configuration. Given the field is not initialized while the others are, it seems unlikely common clock mode is used. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jesper Nilsson <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: [email protected]
2020-09-10PCI: dwc/intel-gw: Drop unused max_widthRob Herring1-4/+0
'max_width' is read, but never used, so let's remove it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Dilip Kota <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-10PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup()Rob Herring1-14/+1
The PCI_CAP_ID_EXP offset is only needed by intel_pcie_link_setup(), so let's retrieve it there and avoid storing the offset. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Dilip Kota <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-10PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' propertyRob Herring1-6/+0
A driver doesn't need to check for DT 'device_type' property, so let's remove the check. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Dilip Kota <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-10PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup codeRob Herring2-4/+1
The Intel driver is the only one to set PORT_LINK_DLL_LINK_EN. The default value is set and it seems pretty certain that enabling link initialization is always required. Maybe it could just be dropped from the Intel driver, but lets move setting it into the common code to be sure. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Dilip Kota <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-10PCI: dwc: Centralize link gen settingRob Herring11-151/+40
keystone would force gen2 if no DT property. Now it relies on the PCI_EXP_LNKCAP value. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Richard Zhu <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Stanimir Varbanov <[email protected]> Cc: Andy Gross <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected]
2020-09-08PCI: rockchip: Fix bus checks in rockchip_pcie_valid_device()Lorenzo Pieralisi1-7/+4
The root bus checks rework in d84c572de1a3 ("PCI: rockchip: Use pci_is_root_bus() to check if bus is root bus") caused a regression whereby in rockchip_pcie_valid_device() if the bus parameter is the root bus and the dev value == 0, the function should return 1 (ie true) without checking if the bus->parent pointer is a root bus because that triggers a NULL pointer dereference. Fix this by streamlining the root bus detection. Fixes: d84c572de1a3 ("PCI: rockchip: Use pci_is_root_bus() to check if bus is root bus") Link: https://lore.kernel.org/r/[email protected] Reported-by: Samuel Dionne-Riel <[email protected]> Tested-by: Samuel Dionne-Riel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Shawn Lin <[email protected]>
2020-09-08PCI: iproc: Set affinity mask on MSI interruptsMark Tomlinson1-4/+9
The core interrupt code expects the irq_set_affinity call to update the effective affinity for the interrupt. This was not being done, so update iproc_msi_irq_set_affinity() to do so. Link: https://lore.kernel.org/r/[email protected] Fixes: 3bc2b2348835 ("PCI: iproc: Add iProc PCIe MSI support") Signed-off-by: Mark Tomlinson <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Ray Jui <[email protected]>
2020-09-08PCI: mvebu: Remove useless msi_controller pointer allocationLorenzo Pieralisi1-3/+0
The mvebu host controller driver allocates an msi_controller structure pointer without allocating the structure and initializing its methods, which makes the pointer useless. This means that the PCI IRQ MSI layer ignores it and that after all it should not really be needed. Remove it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: Rob Herring <[email protected]> Cc: Thomas Petazzoni <[email protected]>
2020-09-08PCI: dwc: Make ATU accessors privateRob Herring2-18/+6
The ATU registers are only accessed in pcie-designware.c and can be private to it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: Remove read_dbi2 codeRob Herring3-36/+0
The DBI2 appears to be write-only and there's no read accesses in the code anyways, so let's remove all the read_dbi2 related code. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-09-08PCI: dwc/tegra: Use common Designware port logic register definitionsRob Herring2-34/+28
The Tegra driver has its own defines for common Designware Port Logic registers. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: [email protected]
2020-09-08PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offsetRob Herring3-12/+7
While the Designware controller appears to hard code the PCI_CAP_ID_EXP capability register at 0x70, there's no need to hard code this in the driver as it is discoverable. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: [email protected]
2020-09-08PCI: dwc/qcom: Use common PCI register definitionsRob Herring1-10/+8
The QCom driver has its own defines for common PCI config space registers. It also hard codes the capability register offsets which are discoverable. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Stanimir Varbanov <[email protected]> Cc: Andy Gross <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: [email protected]
2020-09-08PCI: dwc/imx6: Use common PCI register definitionsRob Herring1-23/+14
The i.MX6 driver has its own defines for common PCI config space registers. It also hard codes the capability register offsets which are discoverable. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Richard Zhu <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]>
2020-09-08PCI: dwc/meson: Rework PCI config and DW port logic register accessesRob Herring1-51/+25
The meson 'elbi' registers are just the Designware 'dbi' space and all the registers accessed are either standard PCI config space or DWC port logic registers. Convert the accesses to use the common defines and register accessors. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Yue Wang <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: [email protected]
2020-09-08PCI: dwc/meson: Drop unnecessary RC config space initializationRob Herring1-20/+0
The common Designware init already initializes the RC PCI_COMMAND, BAR0 and BAR1 registers. The only difference here is the common code sets SERR. If clearing SERR is what's desired, then the Meson driver should do that instead. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Yue Wang <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: [email protected]
2020-09-08PCI: dwc/meson: Drop the duplicate number of lanes setupRob Herring1-28/+1
The meson lanes initialization is the same DWC port logic registers as in dw_pcie_setup(). We just need to initialize 'num_lanes' to 1 to do the same init. dw_pcie_setup_rc() sets the PORT_LOGIC_SPEED_CHANGE bit, so setting it can be dropped. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Yue Wang <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Neil Armstrong <[email protected]> Cc: Jerome Brunet <[email protected]> Cc: Martin Blumenstingl <[email protected]> Cc: [email protected]
2020-09-08PCI: dwc: Ensure FAST_LINK_MODE is clearedRob Herring2-1/+5
"Fast Link Mode" is a simulation environment speed up setting which should never be set and the default is not set. However some Amlogic platforms have it set (by firmware presumably). See commit 87dccf09323f ("PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link") for more information. Let's clear it in core DWC code so we can drop some vendor specific code. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: Add a 'num_lanes' field to struct dw_pcieRob Herring2-8/+7
Add a 'num_lanes' field to allow drivers to provide a the number of lanes if not in DT or using a custom DT property. A driver can provide a non-zero value which is used if the DT doesn't have a 'num-lanes' property. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROLRob Herring1-2/+0
PCIE_LINK_WIDTH_SPEED_CONTROL is already defined in pcie-designware.h, so remove it from the i.MX6 driver. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Richard Zhu <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]>
2020-09-08PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init()Rob Herring9-34/+11
Move the IS_ENABLED(CONFIG_PCI_MSI) check into dw_pcie_msi_init() instead of duplicating it in all the drivers. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Richard Zhu <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Yue Wang <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Jesper Nilsson <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Xiaowei Song <[email protected]> Cc: Binghui Wang <[email protected]> Cc: Stanimir Varbanov <[email protected]> Cc: Andy Gross <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: Kunihiko Hayashi <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected]
2020-09-08PCI: dwc/keystone: Drop duplicated 'num-viewport'Rob Herring1-10/+1
The DWC core driver already parses and stores the 'num-viewport' DT property, so there is no need for the Keystone driver to store it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: Simplify config space handlingRob Herring3-55/+20
The config space is divided in half for type 0 and type 1 accesses, but this is pointless as there's only one iATU window which is reconfigured on each access. The only platform doing something custom is TI Keystone (surprise!). It does its own mapping of the config space to avoid spliting the config space and never actually uses va_cfg1_base as it has its own config space accessors. With the splitting removed, Keystone can use the default mapping of config space. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-09-08PCI: dwc: Remove storing of PCI resourcesRob Herring4-29/+19
The PCI bridge resources are stored in pci_host_bridge.windows, so there's no need to store them in a DWC specific struct. There's also no need to parse the resources and store them a 2nd time as they are mainly used for one time setup of iATU windows. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Jonathan Chocron <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-09-08PCI: dwc: Remove root_bus pointerRob Herring3-5/+4
The pci_host_bridge struct already has a pointer to its pci_bus, so let's convert the one user to use the bridge struct and remove the private 'root_bus' pointer. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: [email protected]
2020-09-08PCI: dwc: Convert to use pci_host_probe()Rob Herring2-19/+3
Now that there are no more .scan_bus() callbacks, we can remove it and just use pci_host_probe(). Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: keystone: Convert .scan_bus() callback to use add_busRob Herring1-3/+9
TI keystone is the only Designware driver using .scan_bus(). This function pointer is the only thing preventing the Designware driver from using pci_host_probe(). Let's use the pci_ops.add_bus hook instead. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: Also call .add_bus() callback for root busRob Herring1-0/+6
Similar to pcibios_add_bus(), call pci_ops.add_bus() when the root bus is added. This allows host bridge drivers to do any setup requiring a bus pointer. There are currently no .add_bus() callbacks, so this is safe to do. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: Use generic config accessorsRob Herring1-82/+37
Now that all the platforms with custom config access handling define their own pci_ops, let's split the default config accessors to use different pci_ops for root and child buses. With this, we can use the generic config accessors. The child bus accesses mainly require a .map_bus() hook to reconfigure the iATU on each config space access. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: Remove dwc specific config accessor opsRob Herring2-20/+0
Now that all the drivers needing custom config accessors have been converted to define their own pci_ops, we can remove the DWC specific function callbacks {rd,wr}_{own,other}_conf. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: histb: Use pci_ops for root config space accessorsRob Herring1-18/+23
Now that DWC drivers can setup their own pci_ops for the root and child buses, convert the HiSilicon histb driver to use the standard pci_ops for root bus config accesses. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]>
2020-09-08PCI: dwc: exynos: Use pci_ops for root config space accessorsRob Herring1-20/+25
Now that DWC drivers can setup their own pci_ops for the root and child buses, convert the Samsung Exynos driver to use the standard pci_ops for root bus config accesses. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Kukjin Kim <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.