aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)AuthorFilesLines
2024-09-04PCI: brcmstb: Use bridge reset if availableJim Quinlan1-1/+17
The 7712 SoC has a bridge reset which can be described in the device tree. Use it if present. Otherwise, continue to use the legacy method to reset the bridge. Link: https://lore.kernel.org/linux-pci/20240815225731.40276-6-james.quinlan@broadcom.com Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [kwilczynski: commit log, refactored function brcm_pcie_bridge_sw_init_set_generic()] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
2024-09-04PCI: brcmstb: Use common error handling code in brcm_pcie_probe()Jim Quinlan1-13/+12
Refactor the error handling in the bottom half of the probe function for readability. The invocation of clk_prepare_enable() is moved lower in the function and this simplifies a couple of return paths. The dev_err_probe() is also used when it is apt. Link: https://lore.kernel.org/linux-pci/20240815225731.40276-5-james.quinlan@broadcom.com Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-09-03PCI: cadence: Drop excess cdns_pcie_rc.dev kerneldoc descriptionBjorn Helgaas1-1/+0
Struct cdns_pcie_rc once had a .dev member, but it was removed by bd22885aa188 ("PCI: cadence: Refactor driver to use as a core library"). Drop the extra kerneldoc for it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-09-03PCI: mediatek: Drop excess mtk_pcie.mem kerneldoc descriptionBjorn Helgaas1-1/+0
Struct mtk_pcie.mem was removed by 8a26f861b815 ("PCI: mediatek: Use pci_parse_request_of_pci_ranges()"), but the kerneldoc was left. Remove the extra kerneldoc. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-09-03PCI: j721e: Add reset GPIO to struct j721e_pcieThéo Lebrun1-0/+2
Add reset GPIO to struct j721e_pcie, so it can be used at suspend and resume stages. Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-4-a2f9156da6c3@bootlin.com Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-03PCI: j721e: Use dev_err_probe() in the probe() functionThomas Richard1-11/+8
Use dev_err_probe() instead of dev_err() in the probe() function to simplify the code and standardize the error output. Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-3-a2f9156da6c3@bootlin.com Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-09-03PCI: cadence: Set cdns_pcie_host_init() globalThomas Richard2-3/+8
During the resume sequence of the host, cdns_pcie_host_init() needs to be called, so set it global. The dev function parameter is removed, as it isn't used. Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-2-a2f9156da6c3@bootlin.com Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-09-03PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup()Thomas Richard2-13/+32
The function cdns_pcie_host_setup() mixes probe structure and link setup. The link setup must be done during the resume sequence. So extract it from cdns_pcie_host_setup() and create a dedicated function. Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-1-a2f9156da6c3@bootlin.com Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-09-03PCI: mediatek-gen3: Add Airoha EN7581 supportLorenzo Bianconi2-2/+113
Introduce support for Airoha EN7581 PCIe controller to mediatek-gen3 PCIe controller driver. Link: https://lore.kernel.org/linux-pci/aca00bd672ee576ad96d279414fc0835ff31f637.1720022580.git.lorenzo@kernel.org Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
2024-09-03PCI: mediatek-gen3: Rely on reset_bulk APIs for PHY reset linesLorenzo Bianconi1-12/+33
Use reset_bulk APIs to manage PHY reset lines. This is a preliminary patch in order to add Airoha EN7581 PCIe support. Link: https://lore.kernel.org/linux-pci/3ceb83bc0defbcf868521f8df4b9100e55ec2614.1720022580.git.lorenzo@kernel.org Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
2024-09-03PCI: mediatek-gen3: Add mtk_gen3_pcie_pdata data structureLorenzo Bianconi1-3/+21
Introduce mtk_gen3_pcie_pdata data structure in order to define multiple callbacks for each supported SoC. This is a preliminary patch to introduce EN7581 PCIe support. Link: https://lore.kernel.org/linux-pci/c193d1a87505d045e2e0ef33317bce17012ee095.1720022580.git.lorenzo@kernel.org Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
2024-09-01PCI: rcar-gen4: Make read-only const array check_addr staticColin Ian King1-1/+6
Don't populate the const read-only array check_addr on the stack at run time, instead make it static. Link: https://lore.kernel.org/linux-pci/20240822205941.643187-1-colin.i.king@gmail.com Signed-off-by: Colin Ian King <colin.i.king@gmail.com> [kwilczynski: refactor array definition] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-09-01PCI: vmd: Fix indentation issue in vmd_shutdown()Riyan Dhiman1-2/+2
The code in vmd_shutdown() had an indentation issue where spaces were used instead of tabs. This commit corrects the indentation to use tabs, adhering to the Linux kernel coding style guidelines. Issue reported by the checkpatch.pl script: ERROR: code indent should use tabs where possible #1056: FILE: drivers/pci/controller/vmd.c:1056: + struct vmd_dev *vmd = pci_get_drvdata(dev);$ WARNING: please, no spaces at the start of a line #1056: FILE: drivers/pci/controller/vmd.c:1056: + struct vmd_dev *vmd = pci_get_drvdata(dev);$ ERROR: code indent should use tabs where possible #1058: FILE: drivers/pci/controller/vmd.c:1058: + vmd_remove_irq_domain(vmd);$ WARNING: please, no spaces at the start of a line #1058: FILE: drivers/pci/controller/vmd.c:1058: + vmd_remove_irq_domain(vmd);$ No functional changes are intended. Link: https://lore.kernel.org/linux-pci/20240901092602.17414-1-riyandhiman14@gmail.com Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-01PCI: qcom: Disable mirroring of DBI and iATU register space in BAR regionPrudhvi Yarlagadda3-15/+61
PARF hardware block which is a wrapper on top of DWC PCIe controller mirrors the DBI and ATU register space. It uses PARF_SLV_ADDR_SPACE_SIZE register to get the size of the memory block to be mirrored and uses PARF_DBI_BASE_ADDR, PARF_ATU_BASE_ADDR registers to determine the base address of DBI and ATU space inside the memory block that is being mirrored. When a memory region which is located above the SLV_ADDR_SPACE_SIZE boundary is used for BAR region then there could be an overlap of DBI and ATU address space that is getting mirrored and the BAR region. This results in DBI and ATU address space contents getting updated when a PCIe function driver tries updating the BAR/MMIO memory region. Reference memory map of the PCIe memory region with DBI and ATU address space overlapping BAR region is as below. |---------------| | | | | ------- --------|---------------| | | |---------------| | | | DBI | | | |---------------|---->DBI_BASE_ADDR | | | | | | | | | PCIe | |---->2*SLV_ADDR_SPACE_SIZE | BAR/MMIO|---------------| | Region | ATU | | | |---------------|---->ATU_BASE_ADDR | | | | PCIe | |---------------| Memory | | DBI | Region | |---------------|---->DBI_BASE_ADDR | | | | | --------| | | | |---->SLV_ADDR_SPACE_SIZE | |---------------| | | ATU | | |---------------|---->ATU_BASE_ADDR | | | | |---------------| | | DBI | | |---------------|---->DBI_BASE_ADDR | | | | | | ----------------|---------------| | | | | | | |---------------| Currently memory region beyond the SLV_ADDR_SPACE_SIZE boundary is not used for BAR region which is why the above mentioned issue is not encountered. This issue is discovered as part of internal testing when we tried moving the BAR region beyond the SLV_ADDR_SPACE_SIZE boundary. Hence we are trying to fix this. As PARF hardware block mirrors DBI and ATU register space after every PARF_SLV_ADDR_SPACE_SIZE (default 0x1000000) boundary multiple, program maximum possible size to this register by writing 0x80000000 to it(it considers only powers of 2 as values) to avoid mirroring DBI and ATU to BAR/MMIO region. Write the physical base address of DBI and ATU register blocks to PARF_DBI_BASE_ADDR (default 0x0) and PARF_ATU_BASE_ADDR (default 0x1000) respectively to make sure DBI and ATU blocks are at expected memory locations. The register offsets PARF_DBI_BASE_ADDR_V2, PARF_SLV_ADDR_SPACE_SIZE_V2 and PARF_ATU_BASE_ADDR are applicable for platforms that use Qcom IP rev 1.9.0, 2.7.0 and 2.9.0. PARF_DBI_BASE_ADDR_V2 and PARF_SLV_ADDR_SPACE_SIZE_V2 are applicable for Qcom IP rev 2.3.3. PARF_DBI_BASE_ADDR and PARF_SLV_ADDR_SPACE_SIZE are applicable for Qcom IP rev 1.0.0, 2.3.2 and 2.4.0. Update init()/post_init() functions of the respective Qcom IP versions to program applicable PARF_DBI_BASE_ADDR, PARF_SLV_ADDR_SPACE_SIZE and PARF_ATU_BASE_ADDR register offsets. Update the SLV_ADDR_SPACE_SZ macro to 0x80000000 to set highest bit in PARF_SLV_ADDR_SPACE_SIZE register. Cache DBI and iATU physical addresses in 'struct dw_pcie' so that pcie_qcom.c driver can program these addresses in the PARF_DBI_BASE_ADDR and PARF_ATU_BASE_ADDR registers. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/linux-pci/20240814220338.1969668-1-quic_pyarlaga@quicinc.com Signed-off-by: Prudhvi Yarlagadda <quic_pyarlaga@quicinc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
2024-09-01PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interruptManivannan Sadhasivam1-1/+54
Historically, Qcom PCIe RC controllers lacked standard hotplug support. So when an endpoint is attached to the SoC, users have to rescan the bus manually to enumerate the device. But this can be avoided by using the Link up event exposed by the Qcom specific 'global_irq' interrupt. Qcom PCIe RC controllers are capable of generating the 'global' SPI interrupt to the host CPUs. The device driver can use this interrupt to identify events such as PCIe link specific events, safety events etc... One such event is the PCIe Link up event generated when an endpoint is detected on the bus and the Link is 'up'. This event can be used to enumerate the PCIe endpoint devices without user intervention. So add support for capturing the PCIe Link up event using the 'global' interrupt in the driver. Once the Link up event is received, the bus underneath the host bridge is scanned to enumerate PCIe endpoint devices. All of the Qcom SoCs have only one Root Port per controller instance. So only a single 'Link up' event is generated for the PCIe controller. Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-11-263a385fbbcb@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
2024-09-01PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device namesManivannan Sadhasivam1-2/+14
Currently, the IRQ device name for both of these IRQs doesn't have Qcom specific prefix and PCIe domain number. This causes 2 issues: 1. Pollutes the global IRQ namespace since 'global' is a common name. 2. When more than one EP controller instance is present in the SoC, naming conflict will occur. Hence, add 'qcom_pcie_ep_' prefix and PCIe domain number suffix to the IRQ names to uniquely identify the IRQs and also to fix the above mentioned issues. Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-6-263a385fbbcb@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
2024-09-01PCI: qcom-ep: Reword the error message for receiving unknown global IRQ eventManivannan Sadhasivam1-1/+2
Current error message just prints the contents of PARF_INT_ALL_STATUS register as if like the IRQ event number. It could mislead the users. Reword it to make it clear that the error message is actually showing the interrupt status register to help debug spurious IRQ events. While at it, let's also switch over to dev_WARN_ONCE() so that any IRQ storm won't flood the kernel log buffer. Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-2-263a385fbbcb@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
2024-09-01PCI: qcom-ep: Drop the redundant masking of global IRQ eventsManivannan Sadhasivam1-2/+0
Once the events are disabled in PARF_INT_ALL_MASK register, only the enabled events will generate global IRQ. So there is no need to do the masking again in the IRQ handler, drop it. If there are any spurious IRQs getting generated, they will be reported using the existing dev_err() in the handler. Link: https://lore.kernel.org/linux-pci/20240828-pci-qcom-hotplug-v4-1-263a385fbbcb@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
2024-08-31PCI: j721e: Enable ACSPCIE Refclk if "ti,syscon-acspcie-proxy-ctrl" existsSiddharth Vadapalli1-1/+38
The ACSPCIE module is capable of driving the reference clock required by the PCIe Endpoint device. It is an alternative to on-board and external reference clock generators. Enabling the output from the ACSPCIE module's PAD IO Buffers requires clearing the "PAD IO disable" bits of the ACSPCIE_PROXY_CTRL register in the CTRL_MMR register space. Add support to enable the ACSPCIE reference clock output using the optional device-tree property "ti,syscon-acspcie-proxy-ctrl". Link: https://lore.kernel.org/linux-pci/20240829105316.1483684-3-s-vadapalli@ti.com Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-08-31PCI: xilinx-xdma: Add Xilinx QDMA Root Port driverThippeswamy Havalige1-1/+52
Add support for Xilinx QDMA Soft IP core as Root Port. The Versal Prime devices support QDMA soft IP module in programmable logic. The integrated QDMA Soft IP block has integrated bridge function that can act as PCIe Root Port. Link: https://lore.kernel.org/linux-pci/20240811022345.1178203-3-thippesw@amd.com Signed-off-by: Thippeswamy Havalige <thippesw@amd.com> [kwilczynski: removed unused header] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-08-22PCI: xilinx-nwl: Add PHY supportSean Anderson1-3/+81
Add support for enabling/disabling PCIe PHYs. We can't really do anything about failures in the disable/remove path, so just print an error. Link: https://lore.kernel.org/r/20240531161337.864994-7-sean.anderson@linux.dev Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-22PCI: xilinx-nwl: Clean up clock on probe failure/removalSean Anderson1-4/+19
Make sure we turn off the clock on probe failure and device removal. Fixes: de0a01f52966 ("PCI: xilinx-nwl: Enable the clock through CCF") Link: https://lore.kernel.org/r/20240531161337.864994-6-sean.anderson@linux.dev Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-22PCI: xilinx-nwl: Rate-limit misc interrupt messagesSean Anderson1-11/+11
The conditions logged by the misc interrupt can occur repeatedly and continuously. Avoid rendering the console unusable by rate-limiting these messages. Link: https://lore.kernel.org/r/20240531161337.864994-5-sean.anderson@linux.dev Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-22PCI: xilinx-nwl: Fix register misspellingSean Anderson1-6/+6
MSIC -> MISC Fixes: c2a7ff18edcd ("PCI: xilinx-nwl: Expand error logging") Link: https://lore.kernel.org/r/20240531161337.864994-4-sean.anderson@linux.dev Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-22PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handlerSean Anderson1-2/+2
MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/20240531161337.864994-3-sean.anderson@linux.dev Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2024-08-21PCI: qcom: Use OPP only if the platform supports itManivannan Sadhasivam1-2/+5
With commit 5b6272e0efd5 ("PCI: qcom: Add OPP support to scale performance"), OPP was used to control the interconnect and power domains if the platform supported OPP. Also to maintain the backward compatibility with platforms not supporting OPP but just ICC, the above mentioned commit assumed that if ICC was not available on the platform, it would resort to OPP. Unfortunately, some old platforms don't support either ICC or OPP. On those platforms, resorting to OPP in the absence of ICC throws below errors from OPP core during suspend and resume: qcom-pcie 1c08000.pcie: dev_pm_opp_set_opp: device opp doesn't exist qcom-pcie 1c08000.pcie: _find_key: OPP table not found (-19) Also, it doesn't make sense to invoke the OPP APIs when OPP is not supported by the platform at all. Add a "use_pm_opp" flag to identify whether OPP is supported and use it to control invoking the OPP APIs. Fixes: 5b6272e0efd5 ("PCI: qcom: Add OPP support to scale performance") Link: https://lore.kernel.org/linux-pci/20240722131128.32470-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
2024-08-21PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoCManivannan Sadhasivam1-0/+13
SA8775P SoC has support for the hardware parity check feature on the MHI RAM (entity that holds MHI registers, etc.) But due to a hardware bug in the parity check logic, the data parity error interrupt is getting generated all the time when using MHI. So the hardware team has suggested disabling the parity check error to work around the hardware bug. Mask the parity error interrupt in PARF_INT_ALL_5_MASK register. Fixes: 58d0d3e032b3 ("PCI: qcom-ep: Add support for SA8775P SOC") Link: https://lore.kernel.org/linux-pci/20240808063057.7394-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2024-08-13PCI: keystone: Fix if-statement expression in ks_pcie_quirk()Dan Carpenter1-1/+1
This code accidentally uses && where || was intended. It potentially results in a NULL dereference. Thus, fix the if-statement expression to use the correct condition. Fixes: 86f271f22bbb ("PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)") Link: https://lore.kernel.org/linux-pci/1b762a93-e1b2-4af3-8c04-c8843905c279@stanley.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-08-06PCI: xilinx: Silence 'set affinity failed' warningMarek Vasut1-7/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-16-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-08-06PCI: xilinx-xdma: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-15-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-08-06PCI: xilinx-nwl: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-14-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-08-06PCI: vmd: Silence 'set affinity failed' warningMarek Vasut1-12/+1
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-13-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: tegra: Silence 'set affinity failed' warningMarek Vasut1-8/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-12-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: rcar-host: Silence 'set affinity failed' warningMarek Vasut1-8/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-11-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: plda: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-10-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: mobiveil: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-9-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: mediatek: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-8-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jianjun Wang <jianjun.wang@mediatek.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: mediatek-gen3: Silence 'set affinity failed' warningMarek Vasut1-10/+3
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-7-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jianjun Wang <jianjun.wang@mediatek.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: dwc: Silence 'set affinity failed' warningMarek Vasut2-16/+3
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-6-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: brcmstb: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-5-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: altera-msi: Silence 'set affinity failed' warningMarek Vasut1-9/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-4-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-29PCI: aardvark: Silence 'set affinity failed' warningMarek Vasut1-8/+2
Use MSI_FLAG_NO_AFFINITY, which keeps .irq_set_affinity() unset and allows migrate_one_irq() to exit right away, without warnings like this: IRQ...: set affinity failed(-22) Remove the .irq_set_affinity() implementation that is no longer needed. Link: https://lore.kernel.org/r/20240723132958.41320-3-marek.vasut+renesas@mailbox.org Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2024-07-19Merge branch 'pci/misc'Bjorn Helgaas10-0/+10
- Remove unused struct 'acpi_handle_node' (Dr. David Alan Gilbert) - Use array notation for portdrv .id_table consistently (Masahiro Yamada) - Switch to new Intel CPU model defines (Tony Luck) - Add missing MODULE_DESCRIPTION() macros (Jeff Johnson) * pci/misc: PCI: controller: Add missing MODULE_DESCRIPTION() macros PCI: Add missing MODULE_DESCRIPTION() macros PCI/PM: Switch to new Intel CPU model defines PCI: Use array for .id_table consistently ACPI: PCI: Remove unused struct 'acpi_handle_node'
2024-07-19Merge branch 'pci/controller/vmd'Bjorn Helgaas1-4/+4
- Create "domain" symlink for vmd before adding devices below the VMD bridge so it's available when mdadm assembles RAID devices from them (Jiwei Sun) * pci/controller/vmd: PCI: vmd: Create domain symlink before pci_bus_add_devices()
2024-07-19Merge branch 'pci/controller/tegra194'Bjorn Helgaas1-4/+1
- Ensure Tegra194 and Tegra234 inbound ATU entries are 64KB-aligned to match the hardware restriction (Jon Hunter) - Remove unused struct 'tegra_pcie_soc' (Dr. David Alan Gilbert) * pci/controller/tegra194: PCI: tegra: Remove unused struct 'tegra_pcie_soc' PCI: tegra194: Set EP alignment restriction for inbound ATU
2024-07-19Merge branch 'pci/controller/rockchip'Bjorn Helgaas5-44/+315
- Use dev_err_probe() in dw-rockchip probe error path so the failures aren't silent (Uwe Kleine-König) - Sleep PCIE_T_PVPERL_MS (100ms) before deasserting PERST# (Damien Le Moal) - Sleep PCIE_T_RRS_READY_MS (100ms) after conventional reset, before a config access (Damien Le Moal) - Request the PERST# GPIO with GPIOD_OUT_LOW so it matches the POR value, which avoids a spurious PERST# assertion and fixes a Qcom modem firmware crash and issues with WLAN controllers, e.g., RTL8822CE (Manivannan Sadhasivam for rockchip, Niklas Cassel for dw-rockchip) - Refactor dw-rockchip and add support for Endpoint mode for rk3568 and rk3588 (Niklas Cassel) * pci/controller/rockchip: PCI: dw-rockchip: Use pci_epc_init_notify() directly PCI: dw-rockchip: Add endpoint mode support PCI: dw-rockchip: Refactor the driver to prepare for EP mode PCI: dw-rockchip: Add rockchip_pcie_get_ltssm() helper PCI: dw-rockchip: Fix weird indentation PCI: dw-rockchip: Fix initial PERST# GPIO value PCI: dw-rockchip: Add error messages in .probe() error paths PCI: rockchip: Use GPIOD_OUT_LOW flag while requesting ep_gpio PCI: rockchip-host: Wait 100ms after reset before starting configuration PCI: rockchip-host: Fix rockchip_pcie_host_init_port() PERST# handling
2024-07-19Merge branch 'pci/controller/rcar-gen4'Bjorn Helgaas2-34/+276
- Add Synopsys DWC macros for lane skew configuration (Yoshihiro Shimoda) - Add struct rcar_gen4_pcie_drvdata to provide for future SoCs with different initialization requirements (Yoshihiro Shimoda) - Add .ltssm_control() method for SoC dependencies (Yoshihiro Shimoda) - Add r8a779g0 (R-Car V4H) support (Yoshihiro Shimoda) * pci/controller/rcar-gen4: PCI: rcar-gen4: Add support for R-Car V4H PCI: rcar-gen4: Add .ltssm_control() for other SoC support PCI: rcar-gen4: Add struct rcar_gen4_pcie_drvdata PCI: dwc: Add PCIE_PORT_{FORCE,LANE_SKEW} macros
2024-07-19Merge branch 'pci/controller/rcar'Bjorn Helgaas1-1/+5
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to avoid excessive warnings when the driver is confused about link state when resuming (Marek Vasut) * pci/controller/rcar: PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup()
2024-07-19Merge branch 'pci/controller/qcom'Bjorn Helgaas5-168/+290
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid writing out all the clock names (Manivannan Sadhasivam) - Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar) - Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA (HDMA) (Manivannan Sadhasivam) - Enable drivers to supply the eDMA channel count since some can't auto detect this (Manivannan Sadhasivam) - Add HDMA support for the SA8775P SoC (Mrinmay Sarkar) - Override the SA8775P NO_SNOOP default to avoid possible memory corruption (Mrinmay Sarkar) - Make sure resources are disabled during PERST# assertion, even if the link is already disabled (Manivannan Sadhasivam) - Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active even if other drivers don't vote for it (Krishna chaitanya chundru) - Add Operating Performance Points (OPP) to scale performance state based on aggregate link bandwidth to improve SoC power efficiency (Krishna chaitanya chundru) - Return failure instead of success if dev_pm_opp_find_freq_floor() fails (Dan Carpenter) - Avoid an error pointer dereference if dev_pm_opp_find_freq_exact() fails (Dan Carpenter) - Prevent use of uninitialized data in qcom_pcie_suspend_noirq() (Dan Carpenter) * pci/controller/qcom: PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq() PCI: qcom: Prevent potential error pointer dereference PCI: qcom: Fix missing error code in qcom_pcie_probe() PCI: qcom: Add OPP support to scale performance PCI: Bring the PCIe speed to MBps logic to new pcie_dev_speed_mbps() PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path PCI: qcom-ep: Disable resources unconditionally during PERST# assert PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP PCI: qcom: Override NO_SNOOP attribute for SA8775P RC PCI: epf-mhi: Enable HDMA for SA8775P SoC PCI: qcom-ep: Add HDMA support for SA8775P SoC PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers PCI: dwc: Skip finding eDMA channels count for HDMA platforms PCI: dwc: Refactor dw_pcie_edma_find_chip() API PCI: qcom-ep: Add support for SA8775P SOC dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC PCI: qcom: Use devm_clk_bulk_get_all() API
2024-07-19Merge branch 'pci/controller/microchip'Bjorn Helgaas8-560/+1512
- Move PLDA XpressRICH generic DT binding properties to plda,xpressrich3-axi-common.yaml where they can be shared across PLDA-based drivers (Minda Chen) - Create a drivers/pci/controller/plda/ directory for PLDA-based drivers and move pcie-microchip-host.c there (Minda Chen) - Move PLDA generic macros to pcie-plda.h where they can be shared across drivers (Minda Chen) - Extract PLDA generic structures from pcie-microchip-host.c, rename them to be generic, and move them to pcie-plda-host.c where they can be shared across drivers (Minda Chen) - Add a .request_event_irq() callback for requesting device-specific interrupts in addition to PLDA-generic interrupts (Minda Chen) - Add DT binding and driver for the StarFive JH7110 SoC, based on PLDA IP (Minda Chen) * pci/controller/microchip: PCI: starfive: Add JH7110 PCIe controller dt-bindings: PCI: Add StarFive JH7110 PCIe controller PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value PCI: plda: Pass pci_host_bridge to plda_pcie_setup_iomems() PCI: plda: Add host init/deinit and map bus functions PCI: plda: Add event bitmap field to struct plda_pcie_rp PCI: microchip: Move IRQ functions to pcie-plda-host.c PCI: microchip: Add event irqchip field to host port and add PLDA irqchip PCI: microchip: Add get_events() callback and PLDA get_event() PCI: microchip: Add INTx and MSI event num to struct plda_event PCI: microchip: Add request_event_irq() callback function PCI: microchip: Add num_events field to struct plda_pcie_rp PCI: microchip: Rename interrupt related functions PCI: microchip: Move PLDA functions to pcie-plda-host.c PCI: microchip: Rename PLDA functions to be generic PCI: microchip: Move PLDA structures to plda-pcie.h PCI: microchip: Rename PLDA structures to be generic PCI: microchip: Add bridge_addr field to struct mc_pcie PCI: microchip: Move PLDA IP register macros to pcie-plda.h PCI: microchip: Move pcie-microchip-host.c to PLDA directory dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties # Conflicts: # drivers/pci/pci.h
Powered by cgit, Gruvboxed by Blaster4385.