aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/controller
AgeCommit message (Collapse)AuthorFilesLines
2022-10-05Merge branch 'remotes/lorenzo/pci/apple'Bjorn Helgaas1-2/+2
- Switch from gpiod_get_from_of_node() to generic devm GPIO API (Dmitry Torokhov) * remotes/lorenzo/pci/apple: PCI: apple: Do not leak reset GPIO on unbind/unload/error
2022-10-05PCI: qcom-ep: Check platform_get_resource_byname() return valueYang Yingliang1-0/+5
If platform_get_resource_byname() fails, 'mmio_res' will be set to NULL pointer, which causes a NULL pointer dereference when it is used in qcom_pcie_perst_deassert(). Check the return value to prevent it. Link: https://lore.kernel.org/r/[email protected] Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Andrew Halaney <[email protected]>
2022-10-05PCI: qcom-ep: Add support for SM8450 SoCManivannan Sadhasivam1-0/+1
Add support for SM8450 SoC to the Qualcomm PCIe Endpoint Controller driver. The driver uses the same config as the existing SDX55 chipset, so additional settings are not required. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2022-10-05PCI: qcom-ep: Make PERST separation optionalManivannan Sadhasivam1-4/+6
PERST separation is an optional debug feature used to collect the crash dump from the PCIe endpoint devices by the PCIe host when the endpoint crashes. This feature keeps the PCIe link up by separating the PCIe IP block from the SoC reset logic. Make the property optional in the driver. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2022-10-05PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe trafficManivannan Sadhasivam1-1/+8
The Master AXI clock can be disabled when it is not used i.e., when there is no traffic on the PCIe bus. This helps to save power during idle state. [bhelgaas: tidy and wrap comment] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2022-10-05PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SSManivannan Sadhasivam1-0/+9
During L1SS, gate the Master clock supplied to the MHI bus to save power. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-10-05PCI: qcom-ep: Expose link transition counts via debugfsManivannan Sadhasivam1-0/+60
Qualcomm PCIe controllers have debug registers in the MMIO region that count PCIe link transitions. Expose them over debugfs to userspace to help debug the low power issues. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-10-05PCI: qcom-ep: Disable IRQs during driver removeManivannan Sadhasivam1-6/+9
Disable the Global and PERST IRQs during driver remove to avoid getting spurious IRQs after resource deallocation. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-10-03PCI: qcom-ep: Make use of the cached dev pointerManivannan Sadhasivam1-2/+2
In the qcom_pcie_ep_get_resources() function, dev pointer is already cached in a local variable. So let's make use of it instead of getting the dev pointer again from pdev struct. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-10-03PCI: qcom-ep: Rely on the clocks supplied by devicetreeManivannan Sadhasivam1-20/+13
Generally, device drivers should just rely on the platform data like devicetree to supply the clocks required for the functioning of the peripheral. There is no need to hardcode the clk info in the driver. So get rid of the static clk info and obtain the platform supplied clks. The total number of clocks supplied is obtained using the devm_clk_bulk_get_all() API and used for the rest of the clk_bulk_ APIs. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-10-03PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structureManivannan Sadhasivam1-0/+17
Add kernel-doc for qcom_pcie_ep structure. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-10-03phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()Richard Zhu1-3/+3
Refer to phy_core driver, phy_init() must be called before phy_power_on(). Fix the wrong order of phy_init() and phy_power_on() here. Link: https://lore.kernel.org/r/[email protected] Fixes: 1aa97b002258 ("phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver") Tested-by: Alexander Stein <[email protected]> Signed-off-by: Richard Zhu <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Vinod Koul <[email protected]> Acked-by: Lorenzo Pieralisi <[email protected]>
2022-10-03PCI: imx6: Add i.MX8MP PCIe supportRichard Zhu1-2/+25
Add i.MX8MP PCIe support. To avoid codes duplication when find the syscon regmap, add the iomux gpr syscon compatible into drvdata. Link: https://lore.kernel.org/r/[email protected] Tested-by: Marek Vasut <[email protected]> Tested-by: Richard Leitner <[email protected]> Tested-by: Alexander Stein <[email protected]> Signed-off-by: Richard Zhu <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Lucas Stach <[email protected]>
2022-10-03PCI: dwc: Replace of_gpio_named_count() by gpiod_count()Andy Shevchenko1-2/+2
As a preparation to unexport of_gpio_named_count(), convert the driver to use gpiod_count() instead. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Rob Herring <[email protected]>
2022-09-29PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macroPali Rohár1-8/+3
Simplify pci-tegra.c driver code and use new PCI_CONF1_EXT_ADDRESS() macro for accessing PCI config space. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Thierry Reding <[email protected]>
2022-09-29PCI: qcom: Rename host-init error labelJohan Hovold1-2/+2
Use a more descriptive name for the reset host-init error label for consistency. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-09-29PCI: qcom: Drop unused post_deinit callbackJohan Hovold1-3/+0
Drop the unused and confusingly named post_deinit callback that was added for the now removed pipe clock handling. If ever needed we can add back a callback named pre_deinit (or perhaps rather pre_phy_power_off) instead. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-09-27PCI: mt7621: Use PCI_CONF1_EXT_ADDRESS() macroPali Rohár1-11/+6
Simplify pcie-mt7621.c driver code and use new PCI_CONF1_EXT_ADDRESS() macro for accessing PCIe config space. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Sergio Paracuellos <[email protected]>
2022-09-27PCI: ftpci100: Use PCI_CONF1_ADDRESS() macroPali Rohár1-17/+4
Simplify pci-ftpci100.c driver code and use new PCI_CONF1_ADDRESS() macro for accessing PCI config space. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-09-16PCI: aardvark: Add support for PCI Bridge Subsystem Vendor ID on emulated bridgePali Rohár1-0/+3
Register with Subsystem Device/Vendor ID is at offset 0x2c. Export it via the emulated bridge to enable support for the Subsystem Device/Vendor ID - by reading it in the PCI controller config space and storing it in the emulated bridge control structures, so that it is exposed in the respective PCI capability. After this change Subsystem ID is visible in lspci output at line: Capabilities: [40] Subsystem Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-09-14PCI: apple: Do not leak reset GPIO on unbind/unload/errorDmitry Torokhov1-2/+2
The driver allocates reset GPIO in apple_pcie_setup_port() but neither releases the resource, nor uses devm API to have it released automatically. Let's fix this by switching to devm API. While at it let's use generic devm_fwnode_gpiod_get() instead of OF-specific gpiod_get_from_of_node() - this will allow us top stop exporting the latter down the road. Link: https://lore.kernel.org/r/[email protected] Fixes: 1e33888fbe44 ("PCI: apple: Add initial hardware bring-up") Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Hector Martin <[email protected]> Acked-by: Marc Zyngier <[email protected]>
2022-08-30PCI: qcom-ep: Add MODULE_DEVICE_TABLEDmitry Baryshkov1-0/+1
Add MODULE_DEVICE_TABLE to enable module autoloading for respective device. Link: https://lore.kernel.org/r/[email protected] Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-08-29PCI: dwc: Drop dependency on ZONE_DMA32Will McVicker2-22/+7
Re-work the msi_msg DMA allocation logic to use dmam_alloc_coherent() which uses the coherent DMA mask to try to return an allocation within the DMA mask limits. With that, we now can drop the msi_page parameter in struct dw_pcie_rp. This allows kernel configurations that disable ZONE_DMA32 to continue supporting a 32-bit DMA mask. Without this patch, the PCIe host device will fail to probe when ZONE_DMA32 is disabled. Link: https://lore.kernel.org/r/[email protected] Fixes: 35797e672ff0 ("PCI: dwc: Fix MSI msi_msg DMA mapping") Reported-by: Isaac J. Manjarres <[email protected]> Signed-off-by: Will McVicker <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Jingoo Han <[email protected]>
2022-08-25PCI: pci-bridge-emul: Set position of PCI capabilities to real HW valuePali Rohár2-0/+2
mvebu and aardvark HW have PCIe capabilities on different offset in PCI config space. Extend pci-bridge-emul.c code to allow setting custom driver custom value where PCIe capabilities starts. With this change PCIe capabilities of both drivers are reported at the same location as where they are reported by U-Boot - in their real HW offset. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-08-23PCI: mediatek-gen3: Change driver name to mtk-pcie-gen3Felix Fietkau1-1/+1
driver_register() will refuse to register another driver with the same name. This change allows pcie-mediatek-gen3 to coexist with pcie-mediatek built into the kernel. Link: https://lore.kernel.org/r/[email protected] Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Jianjun Wang <[email protected]>
2022-08-23PCI: mvebu: Fix endianness when accessing PCI emul bridge membersPali Rohár1-6/+6
PCI emul bridge members iolimitupper, iobaseupper, memlimit and membase are of type __le16, so correctly access these members using le16_to_cpu() macros. Link: https://lore.kernel.org/r/[email protected] Fixes: e7a01876729c ("PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers") Reported-by: kernel test robot <[email protected]> Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-08-23PCI: qcom: Sort device-id tableJohan Hovold1-7/+7
Sort the device-id table entries alphabetically by compatible string to make it easier to find entries and add new ones. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Brian Masney <[email protected]> Acked-by: Stanimir Varbanov <[email protected]>
2022-08-23PCI: qcom: Clean up IP configurationsJohan Hovold1-60/+29
The various IP versions have different configurations that are encoded in separate sets of operation callbacks. Currently, there is no need for also maintaining corresponding sets of data parameters, but it is conceivable that these may again be found useful (e.g. to implement minor variations of the operation callbacks). Rename the default configuration structures after the IP version they apply to so that they can more easily be reused by different SoCs. Note that SoC specific configurations can be added later if need arises (e.g. cfg_sc8280xp). Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Brian Masney <[email protected]> Acked-by: Stanimir Varbanov <[email protected]>
2022-08-23PCI: qcom: Make all optional clocks optionalJohan Hovold1-24/+4
The kernel is not a devicetree validator and does not need to re-encode information which is already available in the devicetree. This is specifically true for the optional PCIe clocks, some of which are really interconnect clocks. Treat also the 2.7.0 optional clocks as truly optional instead of maintaining a list of clocks per compatible (including two compatible strings for the two identical controllers on sm8450) just to validate the devicetree. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Brian Masney <[email protected]> Acked-by: Stanimir Varbanov <[email protected]>
2022-08-23PCI: qcom: Add support for SA8540PJohan Hovold1-0/+6
The SA8540P platform has five PCIe controllers: two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sa8540p" compatible string and reuse the 1.9.0 ops. Note that like for SC8280XP, the SA8540P controllers need two or three interconnect clocks to be enabled. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Brian Masney <[email protected]> Acked-by: Stanimir Varbanov <[email protected]>
2022-08-23PCI: qcom: Add support for SC8280XPJohan Hovold1-2/+20
The SC8280XP platform has seven PCIe controllers: two used with USB4, two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sc8280xp" compatible string and reuse the 1.9.0 ops. Note that the SC8280XP controllers need two or three interconnect clocks to be enabled. Model these as optional clocks to avoid encoding devicetree data in the PCIe driver. Note that the same could be done for the SM8450 interconnect clocks and possibly also for the TBU clocks. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Acked-by: Stanimir Varbanov <[email protected]>
2022-08-15arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCAWilliam Zhang1-1/+1
With Broadcom Broadband arch ARCH_BCMBCA supported in the kernel, this patch series migrate the ARCH_BCM4908 symbol to ARCH_BCMBCA. Hence replace ARCH_BCM4908 with ARCH_BCMBCA in subsystem Kconfig files. Signed-off-by: William Zhang <[email protected]> Acked-by: Guenter Roeck <[email protected]> (for watchdog) Acked-by: Bjorn Helgaas <[email protected]> (for drivers/pci) Acked-by: Wolfram Sang <[email protected]> (for i2c) Acked-by: Philipp Zabel <[email protected]> (for reset) Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]>
2022-08-13Merge tag 'ntb-5.20' of https://github.com/jonmason/ntbLinus Torvalds1-1/+9
Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
2022-08-09PCI: designware-ep: Allow pci_epc_set_bar() update inbound map addressFrank Li1-1/+9
ntb_mw_set_trans() will set memory map window after endpoint function driver bind. The inbound map address need be updated dynamically when using NTB by PCIe Root Port and PCIe Endpoint connection. Checking if iatu already assigned to the BAR, if yes, using assigned iatu number to update inbound address map and skip set BAR's register. Signed-off-by: Frank Li <[email protected]> Signed-off-by: Jon Mason <[email protected]>
2022-08-04Merge tag 'pci-v5.20-changes' of ↵Linus Torvalds44-1578/+2518
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Consolidate duplicated 'next function' scanning and extend to allow 'isolated functions' on s390, similar to existing hypervisors (Niklas Schnelle) Resource management: - Implement pci_iobar_pfn() for sparc, which allows us to remove the sparc-specific pci_mmap_page_range() and pci_mmap_resource_range(). This removes the ability to map the entire PCI I/O space using /proc/bus/pci, but we believe that's already been broken since v2.6.28 (Arnd Bergmann) - Move common PCI definitions to asm-generic/pci.h and rework others to be be more specific and more encapsulated in arches that need them (Stafford Horne) Power management: - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas) Virtualization: - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate the functions but don't advertise an ACS capability (Pavan Chebbi) Error handling: - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - When we have native control of AER, enable error reporting for all devices that support AER. Previously only a few drivers enabled this (Stefan Roese) - Keep AER error reporting enabled for switches. Previously we enabled this during enumeration but immediately disabled it (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) ASPM: - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g., via sysfs, are not lost across power state changes (Kai-Heng Feng) Endpoint framework: - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie) Endpoint embedded DMA controller driver: - Simplify and clean up support for the DesignWare embedded DMA (eDMA) controller (Frank Li, Serge Semin) Broadcom STB PCIe controller driver: - Avoid config space accesses when link is down because we can't recover from the CPU aborts these cause (Jim Quinlan) - Look for power regulators described under Root Ports in DT and enable them before scanning the secondary bus (Jim Quinlan) - Disable/enable regulators in suspend/resume (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Simplify and clean up clock and PHY management (Richard Zhu) - Disable/enable regulators in suspend/resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) - Make link being down a non-fatal error so controller probe doesn't fail if there are no Endpoints connected (Richard Zhu) Loongson PCIe controller driver: - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) Marvell Aardvark PCIe controller driver: - Add support for AER and Slot capability on emulated bridge (Pali Rohár) MediaTek PCIe controller driver: - Add Airoha EN7532 to DT binding (John Crispin) - Allow building of driver for ARCH_AIROHA (Felix Fietkau) MediaTek PCIe Gen3 controller driver: - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) NVIDIA Tegra194 PCIe controller driver: - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Fix some Root Port interrupt handling issues (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix Data Link Feature capability programming (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) Qualcomm PCIe controller driver: - Rework clock, reset, PHY power-on ordering to avoid hangs and improve consistency (Robert Marko, Christian Marangi) - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) - Add support for more than 32 MSI interrupts (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver (Herve Codina) Samsung Exynos PCIe controller driver: - Fix phy-exynos-pcie driver so it follows the 'phy_init() before phy_power_on()' PHY programming model (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Simplify and clean up the DWC core extensively (Serge Semin) - Fix an issue with programming the ATU for regions that cross a 4GB boundary (Serge Semin) - Enable the CDM check if 'snps,enable-cdm-check' exists; previously we skipped it if 'num-lanes' was absent (Serge Semin) - Allocate a 32-bit DMA-able page to be MSI target instead of using a driver data structure that may not be addressable with 32-bit address (Will McVicker) - Add DWC core support for more than 32 MSI interrupts (Dmitry Baryshkov) Xilinx Versal CPM PCIe controller driver: - Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada)" * tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits) PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS() ...
2022-08-04Merge branch 'pci/misc'Bjorn Helgaas4-4/+4
- Drop of_match_ptr() to avoid unused variables when CONFIG_OF is unset (Bjorn Helgaas) - Fix ARM pci_remap_iospace() when CONFIG_MMU unset to avoid build errors (Pali Rohár) * pci/misc: PCI/ACPI: Update link to PCI firmware specification PCI: Drop of_match_ptr() to avoid unused variables
2022-08-04Merge branch 'pci/ctrl/pm-ops'Bjorn Helgaas10-42/+35
- Convert to new *_PM_OPS macros to avoid need for "#ifdef CONFIG_PM_SLEEP" or "__maybe_unused" (Bjorn Helgaas) * pci/ctrl/pm-ops: PCI: Convert to new *_PM_OPS macros
2022-08-04Merge branch 'pci/ctrl/xilinx-cpm'Bjorn Helgaas1-2/+58
- Add DT binding and driver support for Versal CPM5 Gen5 Root Port (Bharat Kumar Gogada) * pci/ctrl/xilinx-cpm: MAINTAINERS: Add Xilinx Versal CPM Root Port maintainers PCI: xilinx-cpm: Add support for Versal CPM5 Root Port dt-bindings: PCI: xilinx-cpm: Add Versal CPM5 Root Port
2022-08-04Merge branch 'pci/ctrl/vmd'Bjorn Helgaas1-3/+10
- Use devm_kasprintf() instead of simple kasprintf() (Subramanian Mohan) - Add [8086:7D0B] and [8086:AD0B] devices to VMD driver (Francisco Munoz) * pci/ctrl/vmd: PCI: vmd: Add DID 8086:7D0B and 8086:AD0B for Intel MTL SKUs PCI: vmd: Use devm_kasprintf() instead of simple kasprintf()
2022-08-04Merge branch 'pci/ctrl/tegra194'Bjorn Helgaas2-234/+455
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c
2022-08-04Merge branch 'pci/ctrl/rcar-gen2'Bjorn Helgaas1-0/+1
- Convert DT binding to json-schema (Herve Codina) - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding (Herve Codina) - Add Renesas RZ/N1D compatible string ("renesas,pci-rzn1") to rcar-gen2 driver (Herve Codina) * pci/ctrl/rcar-gen2: PCI: rcar-gen2: Add RZ/N1 SOC family compatible string dt-bindings: PCI: renesas,pci-rcar-gen2: Add device tree support for R9A06G032 dt-bindings: PCI: pci-rcar-gen2: Convert bindings to json-schema
2022-08-04Merge branch 'pci/ctrl/qcom'Bjorn Helgaas3-164/+276
- Add PHY clock source implementation (Dmitry Baryshkov) - Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe clocks (Dmitry Baryshkov) - Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi) - Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs (Robert Marko) - Power on PHY before accessing DBI registers on all variants for consistency (Robert Marko) - Remove unnecessary pipe_clk handling since this is done in PHY drivers (Dmitry Baryshkov) - Drop manual pipe_clk_src handling (Dmitry Baryshkov) - Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach) - Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch Siach) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Fix DT description typo (Baruch Siach) - Fix DT "compatibles" typo (Johan Hovold) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) * pci/ctrl/qcom: PCI: qcom: Allow ASPM L1 and substates for 2.7.0 dt-bindings: PCI: qcom: Fix reset conditional dt-bindings: PCI: qcom: Fix description typo PCI: qcom: Add IPQ60xx support PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: dwc: Move GEN3_RELATED DBI definitions to common header PCI: qcom: Drop manual pipe_clk_src handling PCI: qcom: Remove unnecessary pipe_clk handling PCI: qcom: Power on PHY before DBI register accesses PCI: qcom: Power on PHY before IPQ8074 DBI register accesses PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: regmap: add PHY clock source implementation
2022-08-04Merge branch 'pci/ctrl/microchip'Bjorn Helgaas1-0/+2
- Fix refcount leak in mc_pcie_init_irq_domains() (Miaoqian Lin) * pci/ctrl/microchip: PCI: microchip: Fix refcount leak in mc_pcie_init_irq_domains()
2022-08-04Merge branch 'pci/ctrl/mediatek-gen3'Bjorn Helgaas1-3/+45
- Fix refcount leak in mtk_pcie_init_irq_domains() (Miaoqian Lin) - Print decoded LTSSM state when the link doesn't come up (Jianjun Wang) * pci/ctrl/mediatek-gen3: PCI: mediatek-gen3: Print LTSSM state when PCIe link down PCI: mediatek-gen3: Fix refcount leak in mtk_pcie_init_irq_domains()
2022-08-04Merge branch 'pci/ctrl/mediatek'Bjorn Helgaas1-1/+1
- Add Airoha EN7532 to DT binding (John Crispin) - Allow building of mediatek driver for ARCH_AIROHA (Felix Fietkau) * pci/ctrl/mediatek: PCI: mediatek: Allow building for ARCH_AIROHA dt-bindings: PCI: mediatek: Add Airoha EN7532 support
2022-08-04Merge branch 'pci/ctrl/loongson'Bjorn Helgaas2-41/+167
- Wrap ARM64-specific MCFG quirks in #ifdef so Loongson can use the file (Huacai Chen) - Use generic (not 32-bit only) config accesses for LS2K/LS7A (Huacai Chen) - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen) - Avoid config reads to non-existent LS2K/LS7A devices because a hardware defect causes machine hangs (Huacai Chen) - Work around LS7A integrated devices that report incorrect Interrupt Pin values (Jianmin Lv) * pci/ctrl/loongson: PCI: loongson: Work around LS7A incorrect Interrupt Pin registers PCI: loongson: Don't access non-existent devices PCI: loongson: Add ACPI init support PCI: loongson: Use generic 8/16/32-bit config ops on LS2K/LS7A PCI/ACPI: Guard ARM64-specific mcfg_quirks
2022-08-04Merge branch 'pci/ctrl/iproc'Bjorn Helgaas1-2/+2
- Use bitmap API to allocate bitmaps instead of doing it by hand (Christophe JAILLET) * pci/ctrl/iproc: PCI: iproc: Use bitmap API to allocate bitmaps
2022-08-04Merge branch 'pci/ctrl/imx6'Bjorn Helgaas1-304/+360
- Factor out ref clock disables to match enables (Bjorn Helgaas) - Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu) - Propagate regulator and clock errors back to .host_init() caller (Richard Zhu) - Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu) - Call host init function directly in resume instead of duplicating the code (Richard Zhu) - Turn off regulators when suspending (Richard Zhu) - Make link being down a non-fatal error so probe doesn't fail (Richard Zhu) - Start link in resume only if it was up before suspend to reduce resume time (Richard Zhu) - Move PHY init and power-on out of clock- and reset-related functions (Richard Zhu) - Rework suspend callback to be more symmetric with resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) * pci/ctrl/imx6: PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
2022-08-04Merge branch 'pci/ctrl/fu740'Bjorn Helgaas1-2/+0
- Remove unnecessary include files (Bjorn Helgaas) * pci/ctrl/fu740: PCI: fu740: Remove unnecessary include files
2022-08-04Merge branch 'pci/ctrl/exynos'Bjorn Helgaas1-2/+1
- Move samsung phy-exynos-pcie init all to exynos5433_pcie_phy_init() instead of splitting across phy_init() and phy_power_on() (Marek Szyprowski) - Call phy_init() before phy_power_on() for samsung phy-exynos-pcie, as required by the PHY programming model (Marek Szyprowski) * pci/ctrl/exynos: PCI: exynos: Correct generic PHY usage phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacks
Powered by cgit, Gruvboxed by Blaster4385.