| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Instead of an "if" condition with a line split, use the usual error
handling pattern with a separate variable to improve readability.
pci_generic_config_read32() already returns either PCIBIOS_SUCCESSFUL or
PCIBIOS_DEVICE_NOT_FOUND so it is enough to simply return its return value
when ret != PCIBIOS_SUCCESSFUL.
No functional changes intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
Many host controller drivers #include <linux/of_irq.h> even though they
don't need it. Remove the unnecessary #includes.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Roy Zang <[email protected]>
|
|
We have stubs for most OF interfaces even when CONFIG_OF is not set, so we
allow building of most controller drivers in that case for compile testing.
When CONFIG_OF is not set, "of_match_ptr(<match_table>)" compiles to NULL,
which leaves <match_table> unused, resulting in errors like this:
$ make W=1
drivers/pci/controller/pci-xgene.c:636:34: error: ‘xgene_pcie_match_table’ defined but not used [-Werror=unused-const-variable=]
Drop of_match_ptr() to avoid the unused variable warning.
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
- Revert "PCI: xgene: Use inbound resources for setup" (Marc Zyngier)
- Revert "PCI: xgene: Fix IB window setup" (Marc Zyngier)
* remotes/lorenzo/pci/xgene:
PCI: xgene: Revert "PCI: xgene: Fix IB window setup"
PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup"
|
|
Commit c7a75d07827a ("PCI: xgene: Fix IB window setup") tried to
fix the damages that 6dce5aa59e0b ("PCI: xgene: Use inbound resources
for setup") caused, but actually didn't improve anything for some
plarforms (at least Mustang and m400 are still broken).
Given that 6dce5aa59e0b has been reverted, revert this patch as well,
restoring the PCIe support on XGene to its pre-5.5, working state.
Link: https://lore.kernel.org/r/YjN8pT5e6/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Fixes: c7a75d07827a ("PCI: xgene: Fix IB window setup")
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Cc: Rob Herring <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Krzysztof Wilczyński <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Stéphane Graber <[email protected]>
Cc: dann frazier <[email protected]>
|
|
Commit 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
killed PCIe on my XGene-1 box (a Mustang board). The machine itself
is still alive, but half of its storage (over NVMe) is gone, and the
NVMe driver just times out.
Note that this machine boots with a device tree provided by the
UEFI firmware (2016 vintage), which could well be non conformant
with the spec, hence the breakage.
With the patch reverted, the box boots 5.17-rc8 with flying colors.
Link: https://lore.kernel.org/all/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Fixes: 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected]
Cc: Rob Herring <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Krzysztof Wilczyński <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Stéphane Graber <[email protected]>
Cc: dann frazier <[email protected]>
|
|
Today drivers/pci/controller/pci-xgene.c defines SZ_1T
Move it into linux/sizes.h so that it can be re-used elsewhere.
Link: https://lore.kernel.org/r/575cb7164cf124c75df7cb9242ea7374733942bf.1642752946.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: Toan Le <[email protected]>
Cc: [email protected]
|
|
- Use of_device_get_match_data(), not of_match_device(), when we only need
the device data in altera, artpec6, cadence, designware-plat, dra7xx,
keystone, kirin (Fan Fei)
- Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas)
- Drop redundant struct device * from j721e since struct cdns_pcie already
has one (Bjorn Helgaas)
- Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene,
xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
- Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas)
* pci/driver-cleanup:
PCI: spear13xx: Avoid invalid address space conversions
PCI: hisi: Avoid invalid address space conversions
PCI: xilinx-cpm: Rename xilinx_cpm_pcie_port to xilinx_cpm_pcie
PCI: xilinx: Rename xilinx_pcie_port to xilinx_pcie
PCI: xgene: Rename xgene_pcie_port to xgene_pcie
PCI: uniphier: Rename uniphier_pcie_priv to uniphier_pcie
PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie
PCI: rcar-gen2: Rename rcar_pci_priv to rcar_pci
PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_
PCI: microchip: Rename mc_port to mc_pcie
PCI: mediatek-gen3: Rename mtk_pcie_port to mtk_gen3_pcie
PCI: ls-gen4: Rename ls_pcie_g4 to ls_g4_pcie
PCI: iproc: Rename iproc_pcie_pltfm_ to iproc_pltfm_pcie_
PCI: iproc: Rename iproc_pcie_bcma_ to iproc_bcma_pcie_
PCI: intel-gw: Rename intel_pcie_port to intel_pcie
PCI: j721e: Drop redundant struct device *
PCI: j721e: Drop pointless of_device_get_match_data() cast
PCI: kirin: Prefer of_device_get_match_data()
PCI: keystone: Prefer of_device_get_match_data()
PCI: dra7xx: Prefer of_device_get_match_data()
PCI: designware-plat: Prefer of_device_get_match_data()
PCI: cadence: Prefer of_device_get_match_data()
PCI: artpec6: Prefer of_device_get_match_data()
PCI: altera: Prefer of_device_get_match_data()
# Conflicts:
# drivers/pci/controller/pcie-mt7621.c
|
|
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking
for transaction errors on PCI (Naveen Naidu)
- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead
of in host controller drivers, when transactions fail on PCI (Naveen
Naidu)
- Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads
(Naveen Naidu)
* pci/errors:
PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors
PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors
PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors
PCI: Use PCI_ERROR_RESPONSE to identify config read errors
PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads
PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads
PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads
PCI: rockchip-host: Drop error data fabrication when config read fails
PCI: rcar-host: Drop error data fabrication when config read fails
PCI: altera: Drop error data fabrication when config read fails
PCI: mvebu: Drop error data fabrication when config read fails
PCI: aardvark: Drop error data fabrication when config read fails
PCI: kirin: Drop error data fabrication when config read fails
PCI: histb: Drop error data fabrication when config read fails
PCI: exynos: Drop error data fabrication when config read fails
PCI: mediatek: Drop error data fabrication when config read fails
PCI: iproc: Drop error data fabrication when config read fails
PCI: thunder: Drop error data fabrication when config read fails
PCI: Drop error data fabrication when config read fails
PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices
PCI: Set error response data when config read fails
PCI: Add PCI_ERROR_RESPONSE and related definitions
|
|
Rename struct xgene_pcie_port to xgene_pcie to match the convention of
<driver>_pcie. No functional change intended.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Fan Fei <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Toan Le <[email protected]>
|
|
Commit 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
broke PCI support on XGene. The cause is the IB resources are now sorted
in address order instead of being in DT dma-ranges order. The result is
which inbound registers are used for each region are swapped. I don't
know the details about this h/w, but it appears that IB region 0
registers can't handle a size greater than 4GB. In any case, limiting
the size for region 0 is enough to get back to the original assignment
of dma-ranges to regions.
Link: https://lore.kernel.org/all/CA+enf=v9rY_xnZML01oEgKLmvY1NGBUUhnSJaETmXtDtXfaczA@mail.gmail.com/
Link: https://lore.kernel.org/r/[email protected]
Fixes: 6dce5aa59e0b ("PCI: xgene: Use inbound resources for setup")
Reported-by: Stéphane Graber <[email protected]>
Tested-by: Stéphane Graber <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
Cc: [email protected] # v5.5+
|
|
Include PCI_ERROR_RESPONSE along with 0xffffffff in the comment about
identifying config read errors. This makes checks for config read errors
easier to find. Comment change only.
Link: https://lore.kernel.org/r/388b9733bd55394581c447be9f3df42ca2c9759c.1637243717.git.naveennaidu479@gmail.com
Signed-off-by: Naveen Naidu <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
Header file linux/pci_ids.h defines AMCC vendor id (0x10e8) macro named
PCI_VENDOR_ID_AMCC. So use this macro instead of driver custom macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Pali Rohár <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Krzysztof Wilczyński <[email protected]>
|
|
- Fix kernel-doc formatting errors (Krzysztof Wilczyński)
* pci/kernel-doc:
PCI: Fix kernel-doc formatting
|
|
"bar_addr" is passed as the argument to writel(), which expects a
"void __iomem *". Annotate "bar_addr" correctly. Resolves an sparse
"incorrect type in argument 2 (different address spaces)" warning.
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
|
|
Fix kernel-doc formatting throughout drivers/pci and related include files.
No change to functionality intended.
Check for warnings:
$ find include drivers/pci -type f -path "*pci*.[ch]" | xargs scripts/kernel-doc -none
[bhelgaas: squashed to one commit]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
In commit e2dcd20b1645 a change was made to use
devm_platform_ioremap_resource_byname() to simplify code and remove
the res variable; this was wrong since the res variable is still needed
and as an outcome the port->cfg_addr gets an erroneous address.
Revert the change going back to original behaviour.
Link: https://lore.kernel.org/r/[email protected]
Fixes: e2dcd20b1645a ("PCI: controller: Convert to devm_platform_ioremap_resource_byname()")
Reported-by: [email protected]
Tested-by: dann frazier <[email protected]>
Signed-off-by: Dejin Zheng <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: [email protected] # v5.9+
|
|
Configuration Request Retry Status ("CRS") must be supported by all PCIe
devices. CRS Software Visibility is an optional feature that enables a
Root Port to make CRS visible to software by returning a special data value
to complete a config read.
Clarify a comment to say that it is "CRS SV", not "CRS", that can be
enabled.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
|
|
Removed unused ".bus_shift" initialisers from pci-xgene.c as
xgene_pcie_map_bus() did not use these.
Suggested-by: Bjorn Helgaas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
The majority of DT based host drivers use the default .map_irq() and
.swizzle_irq() functions, so let's initialize the function pointers to
the default and drop setting them in the host drivers.
Drivers like iProc which don't support legacy interrupts need to set
.map_irq() back to NULL.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
|
|
Now that pci_parse_request_of_pci_ranges() callers just setup
pci_host_bridge.windows and dma_ranges directly and don't need the bus
range returned, we can just initialize them when allocating the
pci_host_bridge struct.
With this, pci_parse_request_of_pci_ranges() becomes a static function.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
|
|
The struct pci_host_bridge is 0 initialized when allocated, so there's
no need to explicitly set fields to 0.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
|
|
The host bridge's parent device is always the platform device. As we
already have a pointer to it in the devres functions, let's initialize
the parent device. Drivers can still override the parent if desired.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
|
|
Use devm_platform_ioremap_resource_byname() to simplify the code,
since it calls respectively platform_get_resource_byname() and
devm_ioremap_resource().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dejin Zheng <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Gustavo Pimentel <[email protected]>
|
|
The xgene host driver does the same host registration and bus scanning
calls as pci_host_probe, so let's use it instead.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: Toan Le <[email protected]>
|
|
struct pci_ecam_ops is typically DT match table data which is defined to
be const. It's also best practice for ops structs to be const. Ideally,
we'd make struct pci_ops const as well, but that becomes pretty
invasive, so for now we just cast it where needed.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Andrew Murray <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Jonathan Chocron <[email protected]>
Cc: Zhou Wang <[email protected]>
Cc: Robert Richter <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Marc Gonzalez <[email protected]>
Cc: Mans Rullgard <[email protected]>
Cc: [email protected]
|
|
Now that the helpers provide the inbound resources in the host bridge
'dma_ranges' resource list, convert the Xgene host bridge to use the
resource list to setup the inbound addresses.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Andrew Murray <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
|
|
Extend devm_of_pci_get_host_bridge_resources() and
pci_parse_request_of_pci_ranges() helpers to also parse the inbound
addresses from DT 'dma-ranges' and populate a resource list with the
translated addresses. This will help ensure 'dma-ranges' is always
parsed in a consistent way.
Tested-by: Srinath Mannam <[email protected]>
Tested-by: Thomas Petazzoni <[email protected]> # for AArdvark
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Srinath Mannam <[email protected]>
Reviewed-by: Andrew Murray <[email protected]>
Acked-by: Gustavo Pimentel <[email protected]>
Cc: Jingoo Han <[email protected]>
Cc: Gustavo Pimentel <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Tom Joseph <[email protected]>
Cc: Ray Jui <[email protected]>
Cc: Scott Branden <[email protected]>
Cc: [email protected]
Cc: Ryder Lee <[email protected]>
Cc: Karthikeyan Mitran <[email protected]>
Cc: Hou Zhiqiang <[email protected]>
Cc: Simon Horman <[email protected]>
Cc: Shawn Lin <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
Convert the xgene host bridge to use the common
pci_parse_request_of_pci_ranges().
There's no need to assign the resources to a temporary list first. Just
use bridge->windows directly and remove all the temporary list handling.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: Toan Le <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Andrew Murray <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
|
|
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:
kernel BUG at lib/ioremap.c:72!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
Hardware name: Renesas Condor board based on r8a77980 (DT)
Workqueue: events deferred_probe_work_func
pstate: 80000005 (Nzcv daif -PAN -UAO)
pc : ioremap_page_range+0x370/0x3c8
lr : ioremap_page_range+0x40/0x3c8
sp : ffff000008da39e0
x29: ffff000008da39e0 x28: 00e8000000000f07
x27: ffff7dfffee00000 x26: 0140000000000000
x25: ffff7dfffef00000 x24: 00000000000fe100
x23: ffff80007b906000 x22: ffff000008ab8000
x21: ffff000008bb1d58 x20: ffff7dfffef00000
x19: ffff800009c30fb8 x18: 0000000000000001
x17: 00000000000152d0 x16: 00000000014012d0
x15: 0000000000000000 x14: 0720072007200720
x13: 0720072007200720 x12: 0720072007200720
x11: 0720072007300730 x10: 00000000000000ae
x9 : 0000000000000000 x8 : ffff7dffff000000
x7 : 0000000000000000 x6 : 0000000000000100
x5 : 0000000000000000 x4 : 000000007b906000
x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
x1 : 0000000040000000 x0 : 00e80000fe100f07
Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval))
Call trace:
ioremap_page_range+0x370/0x3c8
pci_remap_iospace+0x7c/0xac
pci_parse_request_of_pci_ranges+0x13c/0x190
rcar_pcie_probe+0x4c/0xb04
platform_drv_probe+0x50/0xbc
driver_probe_device+0x21c/0x308
__device_attach_driver+0x98/0xc8
bus_for_each_drv+0x54/0x94
__device_attach+0xc4/0x12c
device_initial_probe+0x10/0x18
bus_probe_device+0x90/0x98
deferred_probe_work_func+0xb0/0x150
process_one_work+0x12c/0x29c
worker_thread+0x200/0x3fc
kthread+0x108/0x134
ret_from_fork+0x10/0x18
Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)
It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.
The X-Gene PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version so that the
pages get unmapped automagically on any probe failure.
Fixes: 5f6b6ccdbe1c ("PCI: xgene: Add APM X-Gene PCIe driver")
Signed-off-by: Sergei Shtylyov <[email protected]>
[[email protected]: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
|
|
Native PCI drivers for root complex devices were originally all in
drivers/pci/host/. Some of these devices can also be operated in endpoint
mode. Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.
These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.
No functional change intended.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Shawn Lin <[email protected]>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <[email protected]>
|