aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc
AgeCommit message (Collapse)AuthorFilesLines
2024-02-09Merge tag 'pci-v6.8-fixes-2' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Fix an unintentional truncation of DWC MSI-X address to 32 bits and update similar MSI code to match (Dan Carpenter) * tag 'pci-v6.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: dwc: Clean up dw_pcie_ep_raise_msi_irq() alignment PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()
2024-02-07PCI: dwc: Clean up dw_pcie_ep_raise_msi_irq() alignmentDan Carpenter1-3/+4
I recently changed the alignment code in dw_pcie_ep_raise_msix_irq(). The code in dw_pcie_ep_raise_msi_irq() is similar, so update it to match, just for consistency. (No effect on runtime, just a cleanup). Link: https://lore.kernel.org/r/184097e0-c728-42c7-9e8a-556bd33fb612@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-02-07PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()Dan Carpenter1-1/+2
The "msg_addr" variable is u64. However, the "aligned_offset" is an unsigned int. This means that when the code does: msg_addr &= ~aligned_offset; it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do the alignment instead. Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support") Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org>
2024-01-31PCI/ASPM: Fix deadlock when enabling ASPMJohan Hovold1-1/+1
A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7
2024-01-17Merge tag 'pci-v6.8-changes' of ↵Linus Torvalds30-362/+526
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Reserve ECAM so we don't assign it to PCI BARs; this works around bugs where BIOS included ECAM in a PNP0A03 host bridge window, didn't reserve it via a PNP0C02 motherboard device, and didn't allocate space for SR-IOV VF BARs (Bjorn Helgaas) - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas) - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas) - Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log bridges before downstream devices so the dmesg order is more logical (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) Resource management: - Restructure pci_dev_for_each_resource() to avoid computing the address of an out-of-bounds array element (the bounds check was performed later so the element was never actually *read*, but it's nicer to avoid even computing an out-of-bounds address) (Andy Shevchenko) Driver binding: - Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) - Drop unused struct pci_driver.node member (Mathias Krause) Virtualization: - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) Error handling: - Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to match spec terminology (Bjorn Helgaas) - Decode Requester ID when no error info found instead of printing the raw hex value (Bjorn Helgaas) Endpoint framework: - Use a unique test pattern for each BAR in the pci_endpoint_test to make it easier to debug address translation issues (Niklas Cassel) Broadcom STB PCIe controller driver: - Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan) Freescale Layerscape PCIe controller driver: - Add suspend/resume support for Layerscape LS1043a and LS1021a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) MediaTek PCIe controller driver: - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) Qualcomm PCIe controller driver: - Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski) - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof Kozlowski) - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof Kozlowski) - Correct the qcom "reset-name" property, previously incorrectly called "reset-names" (Krzysztof Kozlowski) - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong) Renesas R-Car PCIe controller driver: - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) SiFive FU740 PCIe controller driver: - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) Synopsys DesignWare PCIe controller driver: - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) TI J721E PCIe driver: - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) TI Keystone PCIe controller driver: - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) Xilinx XDMA PCIe controller driver: - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) MicroSemi Switchtec management driver: - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) Miscellaneous: - Convert interrupt terminology from "legacy" to "INTx" to be more specific and match spec terminology (Damien Le Moal) - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)" * tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Fix kernel-doc issues PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler PCI: keystone: Fix race condition when initializing PHYs PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members misc: pci_endpoint_test: Use a unique test pattern for each BAR PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI/AER: Use explicit register sizes for struct members PCI/AER: Decode Requester ID when no error info found PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors ...
2024-01-15Merge branch 'pci/irq-clean-up'Bjorn Helgaas15-118/+108
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit and match spec terminology (Bjorn Helgaas) - Use existing PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX in artpec6, cadence, designware, designware-plat, dra7xx, imx6, keembay, keystone, layerscape, mhi, ntb, qcom, rcar, rcar-gen4, rockchip, tegra194, uniphier, vntb; drop the redundant pci_epc_irq_type enum with the same values (Damien Le Moal) - Use "intx" instead of "leg" or "legacy" when describing INTx interrupts in endpoint core, endpoint tests, cadence, dra7xx, designware, dw-rockchip, dwc core, imx6, keystone, layerscape, qcom, rcar-gen4, rockchip, tegra194, uniphier, xilinx-nwl (Damien Le Moal) * pci/irq-clean-up: PCI: xilinx-nwl: Use INTX instead of legacy PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler() PCI: rockchip-ep: Use INTX instead of legacy PCI: uniphier: Use INTX instead of legacy PCI: tegra194: Use INTX instead of legacy PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler() PCI: keystone: Use INTX instead of legacy PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq() PCI: cadence: Use INTX instead of legacy PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq() misc: pci_endpoint_test: Use INTX instead of LEGACY PCI: endpoint: Rename LEGACY to INTX in test function driver PCI: endpoint: Use INTX instead of legacy PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX
2024-01-15Merge branch 'pci/controller/remove-void-return'Bjorn Helgaas3-12/+6
- Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) * pci/controller/remove-void-return: PCI: kirin: Convert to platform remove callback returning void PCI: keystone: Convert to platform remove callback returning void PCI: exynos: Convert to platform remove callback returning void
2024-01-15Merge branch 'pci/controller/rcar'Bjorn Helgaas1-1/+1
- Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) * pci/controller/rcar: PCI: rcar-host: Add support for optional regulators dt-bindings: PCI: rcar-pci-host: Add optional regulators PCI: rcar-gen4: Replace of_device.h with explicit of.h include
2024-01-15Merge branch 'pci/controller/layerscape'Bjorn Helgaas2-31/+176
- Add suspend/resume support for Layerscape LS1043a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) * pci/controller/layerscape: PCI: layerscape: Add suspend/resume for ls1043a PCI: layerscape(ep): Rename pf_* as pf_lut_* PCI: layerscape: Add suspend/resume for ls1021a PCI: layerscape: Add function pointer for exit_from_l2()
2024-01-15Merge branch 'pci/controller/kirin'Bjorn Helgaas1-8/+5
- Use devm_kasprintf() to dynamically allocate clock names, removing need for an intermediate buffer (Christophe JAILLET) * pci/controller/kirin: PCI: kirin: Use devm_kasprintf() to dynamically allocate clock names
2024-01-15Merge branch 'pci/controller/keystone'Bjorn Helgaas1-0/+9
- Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) * pci/controller/keystone: PCI: keystone: Fix race condition when initializing PHYs
2024-01-15Merge branch 'pci/controller/dwc'Bjorn Helgaas30-192/+221
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) - Cast iproc and rcar-gen4 of_device_get_match_data() results to uintptr_t to avoid clang "cast to smaller integer type" warnings (Justin Stitt, Yoshihiro Shimoda) * pci/controller/dwc: PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support PCI: dwc: Convert SOC_SIFIVE to ARCH_SIFIVE
2024-01-09PCI: keystone: Fix race condition when initializing PHYsSiddharth Vadapalli1-0/+9
The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy() function. The PHY in this case is the Serdes. It is possible that the PCI instance is configured for two lane operation across two different Serdes instances, using one lane of each Serdes. In such a configuration, if the reference clock for one Serdes is provided by the other Serdes, it results in a race condition. After the Serdes providing the reference clock is initialized by the PCI driver by invoking its PHY APIs, it is not guaranteed that this Serdes remains powered on long enough for the PHY APIs based initialization of the dependent Serdes. In such cases, the PLL of the dependent Serdes fails to lock due to the absence of the reference clock from the former Serdes which has been powered off by the PM Core. Fix this by obtaining reference to the PHYs before invoking the PHY initialization APIs and releasing reference after the initialization is complete. Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
2024-01-06PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast errorYoshihiro Shimoda1-1/+1
When building with clang 18 with the -Werror compiler option enabled, the following error will be reported: drivers/pci/controller/dwc/pcie-rcar-gen4.c:439:15: error: cast to smaller integer type 'enum dw_pcie_device_mode' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] 439 | rcar->mode = (enum dw_pcie_device_mode)of_device_get_match_data(&rcar->pdev->dev); To fix this issue, cast the data the of_device_get_match_data() helper returns to uintptr_t rather than the dw_pcie_device_mode enum. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-7-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpersYoshihiro Shimoda2-124/+153
The current code calculated some dbi[2] registers' offset by calling dw_pcie_ep_get_dbi[2]_offset() in each function. To improve the code readability, add dw_pcie_ep_{read,write}_dbi[2} and some data-width related helpers. Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_opsYoshihiro Shimoda4-60/+59
Since the struct member .func_conf_select makes the intentions behind it difficult to ascertain from its name alone, rename it to .get_dbi_offset to make the intended usage more obvious. [kwilczynski: commmit log] Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-4-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-01-06PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_opsYoshihiro Shimoda12-13/+13
Since the name of the dw_pcie_ep_ops struct makes it obvious that it's for the PCIe Endpoint, rename the struct member .ep_init to .init. [kwilczynski: commit log] Suggested-by: Serge Semin <fancer.lancer@gmail.com> Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Srikanth Thokala <srikanth.thokala@intel.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2024-01-06PCI: dwc: Drop host prefix from struct dw_pcie_host_ops membersYoshihiro Shimoda23-47/+47
Since the name of the dw_pcie_host_ops struct makes it obvious that it's for the PCIe Host, drop the host prefix from the struct members. [kwilczynski: commit log] Suggested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Lei Chuanhua <lchuanhua@maxlinear.com> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2023-12-19PCI: uniphier: Use INTX instead of legacyDamien Le Moal2-8/+8
In the Designware uniphier controller driver, including the endpoint driver, change all names using "legacy" to use "intx", to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-14-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-19PCI: tegra194: Use INTX instead of legacyDamien Le Moal1-5/+5
In the Designware tegra194 controller driver, change all names using "legacy" to use "intx", to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-13-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-19PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler()Damien Le Moal1-2/+2
Rename the function rockchip_pcie_legacy_int_handler() to rockchip_pcie_intx_handler() to match the code managing INTX interrupts (e.g. intx_domain_ops) and the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-12-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-19PCI: keystone: Use INTX instead of legacyDamien Le Moal1-40/+37
In the Keystone controller driver, change all names using "legacy" to use "intx" instead, to match the term used in the PCI specifications. Given that the field legacy_intc_np of struct keystone_pcie is unused, this field is removed instead of being renamed. Link: https://lore.kernel.org/r/20231122060406.14695-11-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-19PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq()Damien Le Moal7-10/+10
Rename the function dw_pcie_ep_raise_legacy_irq() of the Designware endpoint controller driver to dw_pcie_ep_raise_intx_irq() to match the name of the PCI_IRQ_INTX macro. Link: https://lore.kernel.org/r/20231122060406.14695-10-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-19PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq()Damien Le Moal1-2/+2
Rename the function dra7xx_pcie_raise_legacy_irq() to dra7xx_pcie_raise_intx_irq() to match the use of the PCI_IRQ_INTX macro. Link: https://lore.kernel.org/r/20231122060406.14695-8-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-18PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitionsDamien Le Moal13-51/+44
linux/pci.h defines the IRQ flags PCI_IRQ_INTX, PCI_IRQ_MSI and PCI_IRQ_MSIX. Let's use these flags directly instead of the endpoint definitions provided by enum pci_epc_irq_type. This removes the need for defining this enum type completely. Link: https://lore.kernel.org/r/20231122060406.14695-3-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-18PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment supportNiklas Cassel1-0/+1
Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to support iATUs which require a specific alignment. However, this support cannot have been properly tested. The whole point is for the iATU to map an address that is aligned, using dw_pcie_ep_map_addr(), and then let the writel() write to ep->msi_mem + aligned_offset. Thus, modify the address that is mapped such that it is aligned. With this change, dw_pcie_ep_raise_msix_irq() matches the logic in dw_pcie_ep_raise_msi_irq(). Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org Fixes: 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: stable@vger.kernel.org # 5.7 Cc: Kishon Vijay Abraham I <kishon@kernel.org>
2023-12-17PCI: kirin: Use devm_kasprintf() to dynamically allocate clock namesChristophe JAILLET1-8/+5
Use devm_kasprintf() instead of open coding it. This saves the need of an intermediate buffer. There was also no reason to use devm_kstrdup_const() as string is known to be constant. [kwilczynski: commit log, and add missing Reviewed-by tag] Link: https://lore.kernel.org/linux-pci/1bad6879083a7d836c8a47418a0afa22485e8f69.1700294127.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-16PCI: kirin: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). In the error path emit an error message replacing the (less useful) message by the core. Apart from the improved error message there is no change in behaviour. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/linux-pci/c3a51791d54deaa818b8526975fc4e16ef1090ce.1701682617.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-12-16PCI: keystone: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). In the error path emit an error message replacing the (less useful) message by the core. Apart from the improved error message there is no change in behaviour. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/linux-pci/06612aff79dfb52d5b0b20129dff5e4b1f04d3a7.1701682617.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-12-16PCI: exynos: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). In the error path emit an error message replacing the (less useful) message by the core. Apart from the improved error message there is no change in behaviour. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/linux-pci/50de44ea8931465fd9cdc821854ea761cb43adf6.1701682617.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-12-16PCI: dwc: Convert SOC_SIFIVE to ARCH_SIFIVEConor Dooley1-1/+1
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the SiFive PCI drivers to use the newer symbol. Link: https://lore.kernel.org/linux-pci/20230918-safeness-cornflake-62278bc3aaaa@wendy Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-12-14PCI: rcar-gen4: Replace of_device.h with explicit of.h includeRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231207165251.2855783-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2023-12-12PCI: layerscape: Add suspend/resume for ls1043aFrank Li1-1/+62
Add suspend/resume support for Layerscape LS1043a. In the suspend path, PME_Turn_Off message is sent to the endpoint to transition the link to L2/L3_Ready state. In this SoC, there is no way to check if the controller has received the PME_To_Ack from the endpoint or not. So to be on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on the VAUX supply. In the resume path, the link is brought back from L2 to L0 by doing a software reset. Link: https://lore.kernel.org/r/20231204160829.2498703-5-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com>
2023-12-12PCI: layerscape(ep): Rename pf_* as pf_lut_*Frank Li2-25/+25
'pf' and 'lut' are two different acronyms describing the same thing, basically it is a MMIO base address plus an offset. Rename them to avoid duplicate pf_* and lut_* naming schemes in the driver. Link: https://lore.kernel.org/r/20231204160829.2498703-4-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com>
2023-12-12PCI: layerscape: Add suspend/resume for ls1021aFrank Li1-3/+80
Add suspend/resume support for Layerscape LS1021a. In the suspend path, PME_Turn_Off message is sent to the endpoint to transition the link to L2/L3_Ready state. In this SoC, there is no way to check if the controller has received the PME_To_Ack from the endpoint or not. So to be on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on the VAUX supply. In the resume path, the link is brought back from L2 to L0 by doing a software reset. Link: https://lore.kernel.org/r/20231204160829.2498703-3-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com>
2023-12-12PCI: layerscape: Add function pointer for exit_from_l2()Frank Li1-2/+9
Since different SoCs require different sequences for exiting L2, let's add a separate "exit_from_l2()" callback to handle SoC specific sequences. Change ls_pcie_exit_from_l2() return value from void to int in order to propagate errors. Return an error if the exit_from_l2() callback fails in the resume flow. Link: https://lore.kernel.org/r/20231204160829.2498703-2-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Roy Zang <Roy.Zang@nxp.com>
2023-12-11PCI: qcom: Clean up ASPM commentJohan Hovold1-1/+4
Break up the newly added ASPM comment so that it fits within the soft 80 character limit and becomes more readable. Link: https://lore.kernel.org/r/20231128081512.19387-5-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-11PCI: qcom: Fix potential deadlock when enabling ASPMJohan Hovold1-1/+1
The qcom_pcie_enable_aspm() helper is called from pci_walk_bus() during host init to enable ASPM. Since pci_walk_bus() already holds a pci_bus_sem read lock, use pci_enable_link_state_locked() to enable link states in order to avoid a potential deadlock (e.g. in case someone takes a write lock before reacquiring the read lock). This issue was reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0-rc1 #4 Not tainted -------------------------------------------- kworker/u16:6/147 is trying to acquire lock: ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_enable_link_state+0x74/0x1e8 but task is already holding lock: ffffbf3ff9d2cfa0 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Fixes: 9f4f3dfad8cf ("PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops") Link: https://lore.kernel.org/r/20231128081512.19387-4-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> [bhelgaas: add "potential" in subject since the deadlock has only been reported by lockdep, include helper name in commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-11-02Merge tag 'pci-v6.7-changes' of ↵Linus Torvalds15-127/+739
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use acpi_evaluate_dsm_typed() instead of open-coding _DSM evaluation to learn device characteristics (Andy Shevchenko) - Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK definition (Ilpo Järvinen) - Simplify config access error checking in various drivers (Ilpo Järvinen) - Use pcie_capability_clear_word() (not pcie_capability_clear_and_set_word()) when only clearing (Ilpo Järvinen) - Add pci_get_base_class() to simplify finding devices using base class only (ignoring subclass and programming interface) (Sui Jingfeng) - Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA devices from before the Class Code was added to PCI (Sui Jingfeng) - Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to include ancient VGA devices (Sui Jingfeng) Resource management: - Make pci_assign_unassigned_resources() non-init because sparc uses it after init (Randy Dunlap) Driver binding: - Retain .remove() and .probe() callbacks (previously __init) because sysfs may cause them to be called later (Uwe Kleine-König) - Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so it can be claimed by dwc3 instead (Vicki Pfau) PCI device hotplug: - Add Ampere Altra Attention Indicator extension driver for acpiphp (D Scott Phillips) Power management: - Quirk VideoPropulsion Torrent QN16e with longer delay after reset (Lukas Wunner) - Prevent users from overriding drivers that say we shouldn't use D3cold (Lukas Wunner) - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 because wakeup interrupts from those states don't work if amd-pmc has put the platform in a hardware sleep state (Mario Limonciello) IOMMU: - Disable ATS for Intel IPU E2000 devices with invalidation message endianness erratum (Bartosz Pawlowski) Error handling: - Factor out interrupt enable/disable into helpers (Kai-Heng Feng) Peer-to-peer DMA: - Fix flexible-array usage in struct pci_p2pdma_pagemap in case we ever use pagemaps with multiple entries (Gustavo A. R. Silva) ASPM: - Revert a change that broke when drivers disabled L1 and users later enabled an L1.x substate via sysfs, and fix a similar issue when users disabled L1 via sysfs (Heiner Kallweit) Endpoint framework: - Fix double free in __pci_epc_create() (Dan Carpenter) - Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie) Cadence PCIe controller driver: - Drop unused "is_rc" member (Li Chen) Freescale Layerscape PCIe controller driver: - Enable 64-bit addressing in endpoint mode (Guanhua Gao) Intel VMD host bridge driver: - Fix multi-function header check (Ilpo Järvinen) Microsoft Hyper-V host bridge driver: - Annotate struct hv_dr_state with __counted_by (Kees Cook) NVIDIA Tegra194 PCIe controller driver: - Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup() already does this via dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda) Qualcomm PCIe controller driver: - Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed (Manivannan Sadhasivam) - Add a .write_dbi2() callback so DBI2 register writes, e.g., for setting the BAR size, work correctly (Manivannan Sadhasivam) - Enable ASPM for platforms that use 1.9.0 ops, because the PCI core doesn't enable ASPM states that haven't been enabled by the firmware (Manivannan Sadhasivam) Renesas R-Car Gen4 PCIe controller driver: - Add DesignWare core support (set max link width, EDMA_UNROLL flag, .pre_init(), .deinit(), etc) for use by R-Car Gen4 driver (Yoshihiro Shimoda) - Add driver and DT schema for DesignWare-based Renesas R-Car Gen4 controller in both host and endpoint mode (Yoshihiro Shimoda) Xilinx NWL PCIe controller driver: - Update ECAM size to support 256 buses (Thippeswamy Havalige) - Stop setting bridge primary/secondary/subordinate bus numbers, since PCI core does this (Thippeswamy Havalige) Xilinx XDMA controller driver: - Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with Xilinx XDMA Soft IP (Thippeswamy Havalige) Miscellaneous: - Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT macros (Ilpo Järvinen, Bjorn Helgaas) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Replace unnecessary UTF-8 in Kconfig help text because menuconfig doesn't render it correctly (Liu Song)" * tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits) PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge PCI: xilinx-cpm: Move IRQ definitions to a common header PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI/AER: Factor out interrupt toggling into helpers PCI: acpiphp: Allow built-in drivers for Attention Indicators PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() ...
2023-10-28Merge branch 'pci/field-get'Bjorn Helgaas2-10/+14
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo Järvinen, Bjorn Helgaas) - Rework DPC control programming for clarity (Ilpo Järvinen) * pci/field-get: PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk PCI: Use FIELD_GET() PCI/MSI: Use FIELD_GET/PREP() PCI/DPC: Use defines with DPC reason fields PCI/DPC: Use defined fields with DPC_CTL register PCI/DPC: Use FIELD_GET() PCI: hotplug: Use FIELD_GET/PREP() PCI: dwc: Use FIELD_GET/PREP() PCI: cadence: Use FIELD_GET() PCI: Use FIELD_GET() to extract Link Width PCI: mvebu: Use FIELD_PREP() with Link Width PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields # Conflicts: # drivers/pci/controller/dwc/pcie-tegra194.c
2023-10-28Merge branch 'pci/controller/speed'Bjorn Helgaas3-45/+14
- Use PCIE_SPEED2MBS_ENC() macro in qcom host and endpoint to encode link speed instead of hard-coding the link speed in MBps (Manivannan Sadhasivam) - Use Mbps_to_icc() (not MBps_to_icc()) in tegra194 instead of explicitly doing the bytes-to-bits conversion (Manivannan Sadhasivam) * pci/controller/speed: PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed PCI: qcom-ep: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
2023-10-28Merge branch 'pci/controller/rcar'Bjorn Helgaas7-63/+651
- Add generic T_PVPERL macro for the required interval between power being stable and PERST# being inactive (Yoshihiro Shimoda) - Factor out dw_pcie_link_set_max_link_width() (Yoshihiro Shimoda) - Update PCI_EXP_LNKCAP_MLW so Link Capabilities shows the correct max link width (Yoshihiro Shimoda) - Drop tegra194 PCI_EXP_LNKCAP_MLW setting since dw_pcie_setup() already does it (Yoshihiro Shimoda) - Add dwc support for different dbi and dbi2 register offsets, to be used for R-Car Gen4 controllers (Yoshihiro Shimoda) - Add EDMA_UNROLL capability flag for R-Car Gen4 controllers that don't correctly advertise unrolled mapping via their eDMA CTRL register (Yoshihiro Shimoda) - Export dw_pcie_ep_exit() for use by the modular R-Car Gen4 driver (Yoshihiro Shimoda) - Add .pre_init() and .deinit() hooks for use by R-Car Gen4 controllers (Yoshihiro Shimoda) - Increase snps,dw-pcie DT reg and reg-names maxItems for R-Car Gen4 controllers (Yoshihiro Shimoda) - Add rcar-gen4-pci host and endpoint DT bindings and drivers (Yoshihiro Shimoda) - Add Renesas R8A779F0 Device ID to pci_endpoint_test to allow testing on R-Car S4-8 (Yoshihiro Shimoda) * pci/controller/rcar: misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controller MAINTAINERS: Update PCI DRIVER FOR RENESAS R-CAR for R-Car Gen4 PCI: rcar-gen4: Add endpoint mode support PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Endpoint dt-bindings: PCI: renesas: Add R-Car Gen4 PCIe Host dt-bindings: PCI: dwc: Update maxItems of reg and reg-names PCI: dwc: endpoint: Introduce .pre_init() and .deinit() PCI: dwc: Expose dw_pcie_write_dbi2() to module PCI: dwc: Expose dw_pcie_ep_exit() to module PCI: dwc: Add EDMA_UNROLL capability flag PCI: dwc: endpoint: Add multiple PFs support for dbi2 PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW setting PCI: dwc: Add missing PCI_EXP_LNKCAP_MLW handling PCI: dwc: Add dw_pcie_link_set_max_link_width() PCI: Add T_PVPERL macro
2023-10-28Merge branch 'pci/controller/qcom-ep'Bjorn Helgaas1-0/+17
- Add qcom-ep callback to write DBI2 registers (Manivannan Sadhasivam) * pci/controller/qcom-ep: PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
2023-10-28Merge branch 'pci/controller/layerscape'Bjorn Helgaas1-0/+2
- Set 64-bit DMA mask for layerscape-ep (Guanhua Gao) * pci/controller/layerscape: PCI: layerscape-ep: Set 64-bit DMA mask
2023-10-28Merge branch 'pci/controller/aspm'Bjorn Helgaas3-0/+32
- Add a dwc .host_post_init() callback for configuration after downstream devices are scanned (Manivannan Sadhasivam) - Enable ASPM for devices below qcom 1.9.0 host controllers (Manivannan Sadhasivam) * pci/controller/aspm: PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops PCI: dwc: Add host_post_init() callback
2023-10-27PCI: qcom-ep: Add dedicated callback for writing to DBI2 registersManivannan Sadhasivam1-0/+17
The DWC core driver exposes the write_dbi2() callback for writing to the DBI2 registers in a vendor-specific way. On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be asserted before writing to any DBI2 registers and deasserted once done. So, let's implement the callback for the Qcom PCIe EP driver so that the DBI2 writes are correctly handled in the hardware. Without this callback, the DBI2 register writes like BAR size won't go through and as a result, the default BAR size is set for all BARs. [kwilczynski: commit log, renamed function to match the DWC convention] Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Suggested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Cc: stable@vger.kernel.org # 5.16+
2023-10-24PCI: dwc: Use FIELD_GET/PREP()Ilpo Järvinen2-6/+11
Convert open-coded variants of PCI field access into FIELD_GET/PREP() to make the code easier to understand. Add two missing defines into pci_regs.h. Logically, the Max No-Snoop Latency Register is a separate word sized register in the PCIe spec, but the pre-existing LTR defines in pci_regs.h with dword long values seem to consider the registers together (the same goes for the only user). Thus, follow the custom and make the new values also take both word long LTR registers as a joint dword register. Link: https://lore.kernel.org/r/20231024110336.26264-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-23PCI: rcar-gen4: Add endpoint mode supportYoshihiro Shimoda2-4/+164
Add R-Car Gen4 PCIe controller for endpoint mode. This controller is based on Synopsys DesignWare PCIe. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-14-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-23PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host modeYoshihiro Shimoda3-0/+393
Add R-Car Gen4 PCIe controller support for host mode. This controller is based on Synopsys DesignWare PCIe. However, this particular controller has a number of vendor-specific registers, and as such, requires initialization code like mode setting and retraining and so on. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-13-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-23PCI: dwc: endpoint: Introduce .pre_init() and .deinit()Yoshihiro Shimoda2-1/+13
Renesas R-Car Gen4 PCIe controllers require vendor-specific initialization before .init(). To use dw->dbi and dw->num-lanes in the initialization code, introduce .pre_init() into struct dw_pcie_ep_ops. While at it, also introduce .deinit() to disable the controller by using vendor-specific de-initialization. Note that the ep_init in the struct dw_pcie_ep_ops should be renamed to init later. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-9-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Powered by cgit, Gruvboxed by Blaster4385.