aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc
AgeCommit message (Collapse)AuthorFilesLines
2022-02-23PCI: qcom: Add ddrss_sf_tbu flagDmitry Baryshkov1-1/+3
Qualcomm PCIe driver uses compatible string to check if the ddrss_sf_tbu clock should be used. Since sc7280 support has added flags, switch to the new mechanism to check if this clock should be used. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Acked-by: Stanimir Varbanov <[email protected]>
2022-02-23PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfgDmitry Baryshkov1-18/+16
In preparation to adding more flags to configuration data, use pointer to struct qcom_pcie_cfg directly inside struct qcom_pcie, rather than duplicating all its fields. This would save us from the boilerplate code that just copies flag values from one struct to another one. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Acked-by: Stanimir Varbanov <[email protected]>
2022-02-17PCI: Add defines for normal and subtractive PCI bridgesPali Rohár3-13/+13
Add these PCI class codes to pci_ids.h: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE Use these defines in all kernel code for describing PCI class codes for normal and subtractive PCI bridges. [bhelgaas: similar change in pci-mvebu.c] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2022-02-11PCI: uniphier-ep: Add NX1 supportKunihiko Hayashi1-0/+81
Add basic support for UniPhier NX1 SoC as non-legacy SoC. This includes a compatible string, SoC-dependent data containing init() and wait() functions for the controller. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kunihiko Hayashi <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]>
2022-02-11PCI: uniphier-ep: Add SoC data structureKunihiko Hayashi1-19/+42
Define SoC data structure that includes pci_epc_features, SoC-dependent callback functions and flags to distinguish the behavior of each SoC. The callback functions define init() to initialize the controller and wait() to wait until initialization is completed. Rename uniphier_pcie_init_ep() to uniphier_pcie_pro5_init_ep() for initializing PCIe controller implemented in Pro5 SoC. And Pro5 SoC doesn't have wait() function. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kunihiko Hayashi <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]>
2022-02-04PCI: kirin: Add dev struct for of_device_get_match_data()Bjorn Helgaas1-13/+18
Bean reported that a622435fbe1a ("PCI: kirin: Prefer of_device_get_match_data()") broke kirin_pcie_probe() because it assumed match data of 0 was a failure when in fact, it meant the match data was "(void *)PCIE_KIRIN_INTERNAL_PHY". Therefore, probing of "hisilicon,kirin960-pcie" devices failed with -EINVAL and an "OF data missing" message. Add a struct kirin_pcie_data to encode the PHY type. Then the result of of_device_get_match_data() should always be a non-NULL pointer to a struct kirin_pcie_data that contains the PHY type. Fixes: a622435fbe1a ("PCI: kirin: Prefer of_device_get_match_data()") Link: https://lore.kernel.org/r/20220202162659.GA12603@bhelgaas Link: https://lore.kernel.org/r/[email protected] Reported-by: Bean Huo <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2022-02-03PCI: imx6: Allow to probe when dw_pcie_wait_for_link() failsFabio Estevam1-8/+2
The intention of commit 886a9c134755 ("PCI: dwc: Move link handling into common code") was to standardize the behavior of link down as explained in its commit log: "The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device." The pci-imx6 still fails to probe when the link is not present, which causes the following warning: imx6q-pcie 8ffc000.pcie: Phy link never came up imx6q-pcie: probe of 8ffc000.pcie failed with error -110 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 30 at drivers/regulator/core.c:2257 _regulator_put.part.0+0x1b8/0x1dc Modules linked in: CPU: 0 PID: 30 Comm: kworker/u2:2 Not tainted 5.15.0-next-20211103 #1 Hardware name: Freescale i.MX6 SoloX (Device Tree) Workqueue: events_unbound async_run_entry_fn [<c0111730>] (unwind_backtrace) from [<c010bb74>] (show_stack+0x10/0x14) [<c010bb74>] (show_stack) from [<c0f90290>] (dump_stack_lvl+0x58/0x70) [<c0f90290>] (dump_stack_lvl) from [<c012631c>] (__warn+0xd4/0x154) [<c012631c>] (__warn) from [<c0f87b00>] (warn_slowpath_fmt+0x74/0xa8) [<c0f87b00>] (warn_slowpath_fmt) from [<c076b4bc>] (_regulator_put.part.0+0x1b8/0x1dc) [<c076b4bc>] (_regulator_put.part.0) from [<c076b574>] (regulator_put+0x2c/0x3c) [<c076b574>] (regulator_put) from [<c08c3740>] (release_nodes+0x50/0x178) Fix this problem by ignoring the dw_pcie_wait_for_link() error like it is done on the other dwc drivers. Tested on imx6sx-sdb and imx6q-sabresd boards. Link: https://lore.kernel.org/r/[email protected] Fixes: 886a9c134755 ("PCI: dwc: Move link handling into common code") Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Richard Zhu <[email protected]> Cc: <[email protected]>
2022-01-23Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds1-1/+1
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Linus Torvalds17-497/+449
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-15all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriateYury Norov1-1/+1
find_first{,_zero}_bit is a more effective analogue of 'next' version if start == 0. This patch replaces 'next' with 'first' where things look trivial. Signed-off-by: Yury Norov <[email protected]> Tested-by: Wolfram Sang <[email protected]>
2022-01-13Merge branch 'pci/driver-cleanup'Bjorn Helgaas10-319/+322
- Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) * pci/driver-cleanup: PCI: spear13xx: Avoid invalid address space conversions PCI: hisi: Avoid invalid address space conversions PCI: xilinx-cpm: Rename xilinx_cpm_pcie_port to xilinx_cpm_pcie PCI: xilinx: Rename xilinx_pcie_port to xilinx_pcie PCI: xgene: Rename xgene_pcie_port to xgene_pcie PCI: uniphier: Rename uniphier_pcie_priv to uniphier_pcie PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie PCI: rcar-gen2: Rename rcar_pci_priv to rcar_pci PCI: mt7621: Rename mt7621_pci_ to mt7621_pcie_ PCI: microchip: Rename mc_port to mc_pcie PCI: mediatek-gen3: Rename mtk_pcie_port to mtk_gen3_pcie PCI: ls-gen4: Rename ls_pcie_g4 to ls_g4_pcie PCI: iproc: Rename iproc_pcie_pltfm_ to iproc_pltfm_pcie_ PCI: iproc: Rename iproc_pcie_bcma_ to iproc_bcma_pcie_ PCI: intel-gw: Rename intel_pcie_port to intel_pcie PCI: j721e: Drop redundant struct device * PCI: j721e: Drop pointless of_device_get_match_data() cast PCI: kirin: Prefer of_device_get_match_data() PCI: keystone: Prefer of_device_get_match_data() PCI: dra7xx: Prefer of_device_get_match_data() PCI: designware-plat: Prefer of_device_get_match_data() PCI: cadence: Prefer of_device_get_match_data() PCI: artpec6: Prefer of_device_get_match_data() PCI: altera: Prefer of_device_get_match_data() # Conflicts: # drivers/pci/controller/pcie-mt7621.c
2022-01-13Merge branch 'pci/errors'Bjorn Helgaas4-12/+6
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) * pci/errors: PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors PCI: Use PCI_ERROR_RESPONSE to identify config read errors PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads PCI: rockchip-host: Drop error data fabrication when config read fails PCI: rcar-host: Drop error data fabrication when config read fails PCI: altera: Drop error data fabrication when config read fails PCI: mvebu: Drop error data fabrication when config read fails PCI: aardvark: Drop error data fabrication when config read fails PCI: kirin: Drop error data fabrication when config read fails PCI: histb: Drop error data fabrication when config read fails PCI: exynos: Drop error data fabrication when config read fails PCI: mediatek: Drop error data fabrication when config read fails PCI: iproc: Drop error data fabrication when config read fails PCI: thunder: Drop error data fabrication when config read fails PCI: Drop error data fabrication when config read fails PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices PCI: Set error response data when config read fails PCI: Add PCI_ERROR_RESPONSE and related definitions
2022-01-13Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas2-8/+8
- Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) * remotes/lorenzo/pci/qcom: PCI: qcom-ep: Constify static dw_pcie_ep_ops PCI: qcom: Use __be16 type to store return value from cpu_to_be16() PCI: qcom: Fix an error handling path in 'qcom_pcie_probe()'
2022-01-13Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas1-3/+24
- Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: PCI: keystone: Use phandle argument from "ti,syscon-pcie-id"/"ti,syscon-pcie-mode" dt-bindings: PCI: ti,am65: Fix "ti,syscon-pcie-id"/"ti,syscon-pcie-mode" to take argument
2022-01-07PCI: keystone: Use phandle argument from ↵Kishon Vijay Abraham I1-3/+24
"ti,syscon-pcie-id"/"ti,syscon-pcie-mode" Get "syscon" pcie_mode and pcie_id offset from the argument of "ti,syscon-pcie-id" and "ti,syscon-pcie-mode" phandle respectively. Previously a subnode to "syscon" node was added which has the exact memory mapped address of pcie_mode and pcie_id but now the offset of pcie_mode and pcie_id within "syscon" is now being passed as argument to "ti,syscon-pcie-id" and "ti,syscon-pcie-mode" phandle. If the offset is not provided in "ti,syscon-pcie-id"/"ti,syscon-pcie-mode", the full memory mapped address of pcie_ctrl is used in order to maintain old DT compatibility. Similar change for J721E is as discussed in [1] [1] -> http://lore.kernel.org/r/CAL_JsqKiUcO76bo1GoepWM1TusJWoty_BRy2hFSgtEVMqtrvvQ@mail.gmail.com Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2022-01-05PCI: layerscape: Change to use the DWC common link-up check functionHou Zhiqiang1-141/+11
The current Layerscape PCIe driver directly uses the physical layer LTSSM code to check the link-up state, which treats the > L0 states as link-up. This is not correct, since there is not explicit map between link-up state and LTSSM. So this patch changes to use the DWC common link-up check function. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hou Zhiqiang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]>
2022-01-04PCI: qcom-ep: Constify static dw_pcie_ep_opsRikard Falkeborn1-1/+1
The only usage of pci_ep_ops is to assign its address to the ops field in the dw_pcie_ep struct which is a pointer to const struct dw_pcie_ep_ops. Make it const to allow the compiler to put it in read-only memory. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rikard Falkeborn <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Krzysztof Wilczyński <[email protected]>
2022-01-03PCI: spear13xx: Avoid invalid address space conversionsBjorn Helgaas1-4/+4
The sparse checker complains about converting pointers between address spaces. We correctly stored an __iomem pointer in struct spear13xx_pcie, but discarded the __iomem when extracting app_base, causing one warning. Then we passed the non-__iomem pointer to writel(), which expects an __iomem pointer, causing another warning. Add the appropriate annotations. The sparse warnings look like this: $ make C=2 drivers/pci/controller/ drivers/pci/controller/dwc/pcie-spear13xx.c:72:54: warning: incorrect type in initializer (different address spaces) drivers/pci/controller/dwc/pcie-spear13xx.c:72:54: expected struct pcie_app_reg *app_reg drivers/pci/controller/dwc/pcie-spear13xx.c:72:54: got void [noderef] __iomem *app_base drivers/pci/controller/dwc/pcie-spear13xx.c:78:26: warning: incorrect type in argument 2 (different address spaces) drivers/pci/controller/dwc/pcie-spear13xx.c:78:26: expected void volatile [noderef] __iomem *addr drivers/pci/controller/dwc/pcie-spear13xx.c:78:26: got unsigned int * Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Pratyush Anand <[email protected]>
2022-01-03PCI: hisi: Avoid invalid address space conversionsBjorn Helgaas1-10/+22
The sparse checker complains about converting pointers between address spaces. The pci_config_window.priv pointer is a generic void *, but hisi_pcie_map_bus() needs a void __iomem *. This isn't a problem in other drivers because they store the __iomem pointer in a driver struct. Add a trivial struct hisi_pcie to avoid the warning. The sparse warning looks like this: $ make C=2 drivers/pci/controller/ drivers/pci/controller/dwc/pcie-hisi.c:61:37: warning: incorrect type in initializer (different address spaces) drivers/pci/controller/dwc/pcie-hisi.c:61:37: expected void [noderef] __iomem *reg_base drivers/pci/controller/dwc/pcie-hisi.c:61:37: got void *priv Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Zhou Wang <[email protected]>
2022-01-03PCI: uniphier: Rename uniphier_pcie_priv to uniphier_pcieFan Fei1-73/+74
Rename struct uniphier_pcie_priv to uniphier_pcie to match the convention of <driver>_pcie. No functional change intended. [bhelgaas: drop extraneous uniphier_pcie_irq_ack() from patch] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Fei <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Kunihiko Hayashi <[email protected]> Cc: Masami Hiramatsu <[email protected]>
2022-01-03PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcieFan Fei1-111/+111
Rename tegra_pcie_dw to tegra194_pcie to match the convention of <driver>_pcie. No functional change intended. [bhelgaas: rename functions similarly] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Fei <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Jonathan Hunter <[email protected]>
2022-01-03PCI: intel-gw: Rename intel_pcie_port to intel_pcieFan Fei1-102/+102
Rename struct intel_pcie_port to intel_pcie to match the convention of <driver>_pcie. No functional change intended. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Fei <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Rahul Tanwar <[email protected]>
2022-01-03PCI: kirin: Prefer of_device_get_match_data()Fan Fei1-4/+2
The kirin driver only needs the device data, not the whole struct of_device_id. Use of_device_get_match_data() instead of of_match_device(). No functional change intended. [bhelgaas: commit log] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Fei <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Xiaowei Song <[email protected]> Cc: Binghui Wang <[email protected]>
2022-01-03PCI: keystone: Prefer of_device_get_match_data()Fan Fei1-3/+1
The keystone driver only needs the device data, not the whole struct of_device_id. Use of_device_get_match_data() instead of of_match_device(). No functional change intended. [bhelgaas: commit log] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Fei <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]>
2022-01-03PCI: dra7xx: Prefer of_device_get_match_data()Fan Fei1-4/+2
The dra7xx driver only needs the device data, not the whole struct of_device_id. Use of_device_get_match_data() instead of of_match_device(). No functional change intended. [bhelgaas: commit log] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Fei <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]>
2022-01-03PCI: designware-plat: Prefer of_device_get_match_data()Fan Fei1-4/+2
The designware-plat driver only needs the device data, not the whole struct of_device_id. Use of_device_get_match_data() instead of of_match_device(). No functional change intended. [bhelgaas: commit log] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Fei <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2022-01-03PCI: artpec6: Prefer of_device_get_match_data()Fan Fei1-4/+2
The artpec6 driver only needs the device data, not the whole struct of_device_id. Use of_device_get_match_data() instead of of_match_device(). No functional change intended. [bhelgaas: commit log] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Fei <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Jesper Nilsson <[email protected]>
2021-12-26PCI: imx: Add the imx8mm pcie supportRichard Zhu1-8/+73
i.MX8MM PCIe works mostly like the i.MX8MQ one, but has a different PHY and allows to output the internal PHY reference clock via the refclk pad. Add the i.MX8MM PCIe support based on the standalone PHY driver. Link: https://lore.kernel.org/r/[email protected] Tested-by: Marcel Ziswiler <[email protected]> Tested-by: Tim Harvey <[email protected]> Signed-off-by: Richard Zhu <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Tim Harvey <[email protected]>
2021-12-06PCI: qcom-ep: Remove surplus dev_err() when using platform_get_irq_byname()Krzysztof Wilczyński1-3/+1
There is no need to call the dev_err() function directly to print a custom message when handling an error from either the platform_get_irq() or platform_get_irq_byname() functions as both are going to display an appropriate error message in case of a failure. This change is as per suggestions from Coccinelle, e.g., drivers/pci/controller/dwc/pcie-qcom-ep.c:556:2-9: line 556 is redundant because platform_get_irq() already prints an error Related: https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Wilczyński <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2021-12-06PCI: qcom: Use __be16 type to store return value from cpu_to_be16()Manivannan Sadhasivam1-1/+1
cpu_to_be16() returns __be16 value but the driver uses u16 and that's incorrect. Fix it by using __be16 as the data type of bdf_be variable. The issue was spotted by the below sparse warning: sparse warnings: (new ones prefixed by >>) >> drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned short [usertype] bdf_be @@ got restricted __be16 [usertype] @@ drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: expected unsigned short [usertype] bdf_be drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: got restricted __be16 [usertype] Link: https://lore.kernel.org/r/[email protected] Reported-by: kernel test robot <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Krzysztof Wilczyński <[email protected]>
2021-12-03treewide: Add missing includes masked by cgroup -> bpf dependencyJakub Kicinski2-0/+2
cgroup.h (therefore swap.h, therefore half of the universe) includes bpf.h which in turn includes module.h and slab.h. Since we're about to get rid of that dependency we need to clean things up. v2: drop the cpu.h include from cacheinfo.h, it's not necessary and it makes riscv sensitive to ordering of include files. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Acked-by: Krzysztof Wilczyński <[email protected]> Acked-by: Peter Chen <[email protected]> Acked-by: SeongJae Park <[email protected]> Acked-by: Jani Nikula <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ # v1 Link: https://lore.kernel.org/all/[email protected]/ # cacheinfo discussion Link: https://lore.kernel.org/bpf/[email protected]
2021-12-02PCI: dwc: Do not remap invalid resTim Harvey1-3/+4
On imx6 and perhaps others when pcie probes you get a: imx6q-pcie 33800000.pcie: invalid resource This occurs because the atu is not specified in the DT and as such it should not be remapped. Link: https://lore.kernel.org/r/[email protected] Fixes: 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows") Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Rob Herring <[email protected]> Acked-by: Richard Zhu <[email protected]> Cc: Richard Zhu <[email protected]>
2021-11-29PCI: qcom: Fix an error handling path in 'qcom_pcie_probe()'Christophe JAILLET1-6/+6
If 'of_device_get_match_data()' fails, previous 'pm_runtime_get_sync()/ pm_runtime_enable()' should be undone. To fix it, the easiest is to move this block of code before the memory allocations and the pm_runtime_xxx calls. Link: https://lore.kernel.org/r/4d03c636193f64907c8dacb17fa71ed05fd5f60c.1636220582.git.christophe.jaillet@wanadoo.fr Fixes: b89ff410253d ("PCI: qcom: Replace ops with struct pcie_cfg in pcie match data") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Reviewed-by: Stephen Boyd <[email protected]>
2021-11-18PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errorsNaveen Naidu1-3/+3
Include PCI_ERROR_RESPONSE along with 0xffffffff in the comment about identifying config read errors. This makes checks for config read errors easier to find. Comment change only. Link: https://lore.kernel.org/r/6ae6b071d92052dc511407513e2a7c0035aff9e7.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2021-11-18PCI: kirin: Drop error data fabrication when config read failsNaveen Naidu1-3/+1
If config pci_ops.read() methods return failure, the PCI_OP_READ() and PCI_USER_READ_CONFIG() wrappers use PCI_SET_ERROR_RESPONSE() to set the data value, so there's no need to set it in the pci_ops.read() methods themselves. Drop the unnecessary data value fabrication when pci_ops.read() fails. Link: https://lore.kernel.org/r/f87e22bc09a471d2cf15ad05dfd6432f57739aed.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2021-11-18PCI: histb: Drop error data fabrication when config read failsNaveen Naidu1-3/+1
If config pci_ops.read() methods return failure, the PCI_OP_READ() and PCI_USER_READ_CONFIG() wrappers use PCI_SET_ERROR_RESPONSE() to set the data value, so there's no need to set it in the pci_ops.read() methods themselves. Drop the unnecessary data value fabrication when pci_ops.read() fails. Link: https://lore.kernel.org/r/7da7ea760abc5f85cad6e9b0d3e59eebd93f50d3.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2021-11-18PCI: exynos: Drop error data fabrication when config read failsNaveen Naidu1-3/+1
If config pci_ops.read() methods return failure, the PCI_OP_READ() and PCI_USER_READ_CONFIG() wrappers use PCI_SET_ERROR_RESPONSE() to set the data value, so there's no need to set it in the pci_ops.read() methods themselves. Drop the unnecessary data value fabrication when pci_ops.read() fails. Link: https://lore.kernel.org/r/765c2f27d85fcee4eb137023dc0a8f864eee9e36.1637243717.git.naveennaidu479@gmail.com Signed-off-by: Naveen Naidu <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2021-11-05Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas5-11/+819
- Add Qualcomm PCIe Endpoint controller driver and DT binding (Manivannan Sadhasivam) - Add qcom struct for device-specific details in match data (Prasad Malisetty) - Switch pcie_1_pipe_clk_src from TCXO to pipe clock after PHY init in SC7280 (Prasad Malisetty) - Add .compatible device ID for SC8180x platform (Bjorn Andersson) * remotes/lorenzo/pci/qcom: PCI: qcom: Add sc8180x compatible PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280 PCI: qcom: Replace ops with struct pcie_cfg in pcie match data MAINTAINERS: Add entry for Qualcomm PCIe Endpoint driver and binding PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller
2021-11-05Merge branch 'pci/host/kirin'Bjorn Helgaas2-149/+499
- Reorganize to separate out PHY logic (Mauro Carvalho Chehab) - Add support for external PHY in addition to the internal PHY (Mauro Carvalho Chehab) - Use regmap so both kirin driver and PHY can access APB registers (Mauro Carvalho Chehab) - Add support for per-lane PERST# GPIOs on HiKey970 external PEX 8606 PCI bridge (Mauro Carvalho Chehab) - Add "hisilicon,kirin970-pcie" compatible string (Mauro Carvalho Chehab) - Add MODULE_* macros (Mauro Carvalho Chehab) - Allow building as a module (Mauro Carvalho Chehab) - Add power_off support for Kirin 960 PHY (Mauro Carvalho Chehab) - Disable clkreq during poweroff sequence (Mauro Carvalho Chehab) - De-init the dwc driver during remove (Mauro Carvalho Chehab) - Allow removal of kirin driver (Mauro Carvalho Chehab) * pci/host/kirin: PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: kirin: Use regmap for APB registers PCI: kirin: Add support for a PHY layer PCI: kirin: Reorganize the PHY logic inside the driver
2021-11-05Merge branch 'remotes/lorenzo/pci/imx6'Bjorn Helgaas1-1/+1
- Remove unused assignment (Krzysztof Wilczyński) * remotes/lorenzo/pci/imx6: PCI: imx6: Remove unused assignment to variable ret
2021-11-04PCI: kirin: Allow removing the driverMauro Carvalho Chehab1-1/+1
Now that everything is in place at the poweroff sequence, this driver can use module_platform_driver(), which allows it to be removed. Link: https://lore.kernel.org/r/53b40494252444a9b830827922c4e3a301b8f863.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
2021-11-04PCI: kirin: De-init the dwc driverMauro Carvalho Chehab1-0/+2
The logic under .remove ops is missing a call to dw_pcie_host_deinit(). Add it, in order to allow the DWC core to be properly cleaned up. Link: https://lore.kernel.org/r/838621e1c84ebaac153ccd9c36ea5e1254c61ead.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
2021-11-04PCI: kirin: Disable clkreq during poweroff sequenceMauro Carvalho Chehab1-0/+3
The logic at kirin_pcie_gpio_request() enables some clkreq GPIO lines. Disable them during power-off. Link: https://lore.kernel.org/r/f403e590843de1a581cade2d534d34715706f54e.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
2021-11-04PCI: kirin: Move the power-off code to a common routineMauro Carvalho Chehab1-11/+15
Instead of having two copies of the same logic, place the power-off logic in a separate function. No functional changes. Link: https://lore.kernel.org/r/64f6e8da3e5fff38b6c8fcb208ace46efe6555bb.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
2021-11-04PCI: kirin: Add power_off support for Kirin 960 PHYMauro Carvalho Chehab1-3/+18
In order to prepare for module unload, add a power_off method for HiKey 960. Link: https://lore.kernel.org/r/b095818b0d7fadae4cae200f481caf7a66e61fb4.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
2021-11-04PCI: kirin: Allow building it as a moduleMauro Carvalho Chehab1-1/+1
There's nothing preventing this driver from being loaded as a module. Change its config from bool to tristate. Link: https://lore.kernel.org/r/b5e7cfe9df09b492750bd6db0f0c911eaae8c2d4.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
2021-11-04PCI: kirin: Add MODULE_* macrosMauro Carvalho Chehab1-0/+5
This driver misses the MODULE_* macros. Add them. Link: https://lore.kernel.org/r/f7a951d0c2009f5765214fc2e83e24cf41585023.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
2021-11-04PCI: kirin: Add Kirin 970 compatibleMauro Carvalho Chehab1-0/+4
Now that everything is in place, add a compatible for Kirin 970. Link: https://lore.kernel.org/r/ac8c730c0300b90d96bdaaf387d458d8949241a9.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
2021-11-04PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridgeMauro Carvalho Chehab1-32/+233
On HiKey970, there's a PEX 8606 PCI bridge on its PHY with 6 lanes. Only 4 lanes are connected: lane 0 - connected to Kirin 970 (upstream) lane 4 - M.2 slot lane 5 - mini PCIe slot lane 6 - on-board Ethernet controller Each lane has its own PERST# GPIO pin and needs a clock request. Add support to parse a DT schema containing the above data. HiKey 970 requires a little more waiting time for the PCI bridge - which is outside the SoC - to finish the PERST# reset, and then initialize the eye diagram. Increase the waiting time for the PERST# signals accordingly. [bhelgaas: squash refcount fix from Wan Jiabing <[email protected]>: https://lore.kernel.org/r/[email protected] and drop "parent" refcount per https://lore.kernel.org/all/20211103143059.GA683503@bhelgaas/] Link: https://lore.kernel.org/r/bb391a0e0f0863b66e645048315fab1a4f63f277.1634812676.git.mchehab+huawei@kernel.org Link: https://lore.kernel.org/all/9a365cffe5af9ec5a1f79638968c3a2efa979b65.1634622716.git.mchehab+huawei@kernel.org/ Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]>
2021-11-02PCI: kirin: Use regmap for APB registersMauro Carvalho Chehab1-23/+26
The PHY layer need to access APB registers too, for Kirin 970. So place them into a named regmap. Link: https://lore.kernel.org/r/daf0e4bda5a69a5ac8484e70f09351a959805c8c.1634812676.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Xiaowei Song <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.