Age | Commit message (Collapse) | Author | Files | Lines |
|
- Return -EPROBE_DEFER in case the gpio isn't ready (Bean Huo)
* remotes/lorenzo/pci/kirin:
PCI: kirin: Return -EPROBE_DEFER in case the gpio isn't ready
|
|
PCI host bridge driver can be probed before the gpiochip it requires,
so, of_get_named_gpio() can return -EPROBE_DEFER. Current code lets the
kirin_pcie_probe() directly return -ENODEV, which results in the PCI
host controller driver probe failure; with this error code the PCI host
controller driver will not be probed again when the gpiochip driver is
loaded.
Fix the above issue by letting kirin_pcie_probe() return -EPROBE_DEFER in
such a case.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bean Huo <[email protected]>
[[email protected]: commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
|
|
Move the IS_ENABLED(CONFIG_PCI_MSI) check into dw_pcie_msi_init()
instead of duplicating it in all the drivers.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: Richard Zhu <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: Yue Wang <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Jesper Nilsson <[email protected]>
Cc: Jingoo Han <[email protected]>
Cc: Gustavo Pimentel <[email protected]>
Cc: Xiaowei Song <[email protected]>
Cc: Binghui Wang <[email protected]>
Cc: Stanimir Varbanov <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Kunihiko Hayashi <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
Now that DWC drivers can setup their own pci_ops for the root and child
buses, convert the HiSilicon Kirin driver to use the standard pci_ops
for root bus config accesses.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: Xiaowei Song <[email protected]>
Cc: Binghui Wang <[email protected]>
Cc: Lorenzo Pieralisi <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
|
|
- Remove redundant logging for platform_get_irq() errors (Krzysztof
Wilczyński)
* pci/irq-error:
PCI: Remove dev_err() when handing an error from platform_get_irq()
|
|
- Add qcom ipq806x support (Ansuel Smith)
- Support max-link-speed DT property for qcom (Sham Muthayyan)
- Use PCI core #defines instead of adding qcom-specific ones (Ansuel Smith)
- Convert to devm_platform_ioremap_resource_byname() instead of open-coding
platform_get_resource_byname() and devm_ioremap_resource() for dra7xx,
keystone, artpec6, designware-plat, histb, intel-gw, kirin, qcom,
uniphier (Dejin Zheng)
- Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)
* remotes/lorenzo/pci/dwc:
PCI: dwc: hisi: Remove non-ECAM HiSilicon hip05/hip06 driver
PCI: dwc: Convert to devm_platform_ioremap_resource_byname()
PCI: qcom: Replace define with standard value
PCI: qcom: Support pci speed set for ipq806x
dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant
PCI: qcom: Add ipq8064 rev2 variant
PCI: qcom: Add support for tx term offset for rev 2.1.0
PCI: qcom: Define some PARF params needed for ipq8064 SoC
PCI: qcom: Use bulk clk api and assert on error
dt-bindings: PCI: qcom: Add ext reset
PCI: qcom: Add missing reset for ipq806x
PCI: qcom: Change duplicate PCI reset to phy reset
dt-bindings: PCI: qcom: Add missing clks
PCI: qcom: Add missing ipq806x clocks in PCIe driver
|
|
There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq() or
platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.
This change is as per suggestions from Coccinelle, e.g.,
drivers/pci/controller/dwc/pcie-armada8k.c:252:2-9: line 252 is
redundant because platform_get_irq() already prints an error
[bhelgaas: squashed into one commit]
Suggested-by: Bjorn Helgaas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Ley Foon Tan <[email protected]> # altera
Acked-by: Jesper Nilsson <[email protected]> # dwc
|
|
Use devm_platform_ioremap_resource_byname() to simplify the code
since it contains platform_get_resource_byname() and
devm_ioremap_resource() respectively.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dejin Zheng <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Gustavo Pimentel <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
|
|
Replace http:// links with https:// links. This reduces the likelihood of
man-in-the-middle attacks when developers open these links.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
[bhelgaas: also update samsung.com links, drop sourceforge link]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexander A. Klimov <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
Static variable kirin_dw_pcie_ops, of type dw_pcie_ops, is used only
once, when it is assigned to the constant field ops of variable pci
(having type dw_pcie) so kirin_dw_pcie_ops is never modified.
Make it constant to protect it from unintended modification.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Andrew Murray <[email protected]>
|
|
Fix typos in drivers/pci. Comment and whitespace changes only.
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
|
|
The PCI kirin driver compilation produces the following section mismatch
warning:
WARNING: vmlinux.o(.text+0x4758cc): Section mismatch in reference from
the function kirin_pcie_probe() to the function
.init.text:kirin_add_pcie_port()
The function kirin_pcie_probe() references
the function __init kirin_add_pcie_port().
This is often because kirin_pcie_probe lacks a __init
annotation or the annotation of kirin_add_pcie_port is wrong.
Remove '__init' from kirin_add_pcie_port() to fix it.
Fixes: fc5165db245a ("PCI: kirin: Add HiSilicon Kirin SoC PCIe controller driver")
Reported-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
[[email protected]: updated commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
|
|
Add support for MSI to the kirin host controller driver, based
on the generic dwc infrastructure.
Signed-off-by: Xiaowei Song <[email protected]>
Signed-off-by: Yao Chen <[email protected]>
[[email protected]: updated commit log]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
|
|
Native PCI drivers for root complex devices were originally all in
drivers/pci/host/. Some of these devices can also be operated in endpoint
mode. Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.
These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.
No functional change intended.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Shawn Lin <[email protected]>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <[email protected]>
|