aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc/pcie-designware-host.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-13Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas1-67/+30
- Move IRQ register address computation inside macros (Kishon Vijay Abraham I) - Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I) - Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham I) - Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon Vijay Abraham I) - Add dwc support for platforms with custom MSI controllers (Kishon Vijay Abraham I) - Add keystone-specific MSI controller (Kishon Vijay Abraham I) - Remove dwc host_ops previously used for keystone-specific MSI (Kishon Vijay Abraham I) - Skip dwc default MSI init if platform has custom MSI controller (Kishon Vijay Abraham I) - Implement .start_link() and .stop_link() for keystone endpoint support (Kishon Vijay Abraham I) - Add keystone "reg-names" DT binding (Kishon Vijay Abraham I) - Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon Vijay Abraham I) - Get keystone register resources from DT by name, not index (Kishon Vijay Abraham I) - Get DT resources in .probe() to prepare for endpoint support (Kishon Vijay Abraham I) - Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration (Kishon Vijay Abraham I) - Explicitly set keystone to host mode (Kishon Vijay Abraham I) - Document DT "atu" reg-names requirement for DesignWare core >= 4.80 (Kishon Vijay Abraham I) - Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon Vijay Abraham I) - Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon Vijay Abraham I) - Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham I) - Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham I) - Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I) - Reset keystone PHYs before enabling them (Kishon Vijay Abraham I) - Make of_pci_get_max_link_speed() available to endpoint drivers as well as host drivers (Kishon Vijay Abraham I) - Add keystone support for DT "max-link-speed" property (Kishon Vijay Abraham I) - Add endpoint library support for BAR buffer alignment (Kishon Vijay Abraham I) - Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I) - Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay Abraham I) - Add dwc hooks for dbi/dbi2 that share the same address space (Kishon Vijay Abraham I) - Add keystone support for TI AM654x in endpoint mode (Kishon Vijay Abraham I) - Configure designware endpoints to advertise smallest resizable BAR (1MB) (Kishon Vijay Abraham I) - Align designware endpoint ATU windows for raising MSIs (Kishon Vijay Abraham I) - Add endpoint test support for TI AM654x (Kishon Vijay Abraham I) - Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test misc: pci_endpoint_test: Add support to test PCI EP in AM654x PCI: designware-ep: Use aligned ATU window for raising MSI interrupts PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size PCI: keystone: Add support for PCIe EP in AM654x Platforms dt-bindings: PCI: Add PCI EP DT binding documentation for AM654 PCI: dwc: Add callbacks for accessing dbi2 address space PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops PCI: endpoint: Add support to specify alignment for buffers allocated to BARs PCI: keystone: Add support to set the max link speed from DT PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers PCI: keystone: Invoke phy_reset() API before enabling PHY PCI: keystone: Add support for PCIe RC in AM654x Platforms dt-bindings: PCI: Add PCI RC DT binding documentation for AM654 PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 PCI: dwc: Fix ATU identification for designware version >= 4.80 PCI: dwc: Enable iATU unroll for endpoint too dt-bindings: PCI: Document "atu" reg-names PCI: keystone: Explicitly set the PCIe mode dt-bindings: PCI: Add dt-binding to configure PCIe mode PCI: keystone: Move resources initialization to prepare for EP support PCI: keystone: Use platform_get_resource_byname() to get memory resources PCI: keystone: Perform host initialization in a single function dt-bindings: PCI: keystone: Add "reg-names" binding information PCI: keystone: Cleanup error_irq configuration PCI: keystone: Add start_link()/stop_link() dw_pcie_ops PCI: dwc: Remove default MSI initialization for platform specific MSI chips PCI: dwc: Remove Keystone specific dw_pcie_host_ops PCI: keystone: Use Keystone specific msi_irq_chip PCI: dwc: Add support to use non default msi_irq_chip PCI: keystone: Cleanup ks_pcie_msi_irq_handler() PCI: keystone: Use hwirq to get the MSI IRQ number offset PCI: keystone: Add separate functions for configuring MSI and legacy interrupt PCI: keystone: Cleanup interrupt related macros # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h
2019-05-07PCI: dwc: Save root bus for driver remove hooksJisheng Zhang1-6/+6
Currently DWC host does not support the remove callback, but nothing prevents us from supporting it. Save the root bus for clean up work in driver remove code paths to allow DWC host drivers to implement their remove hook as, eg: static int foo_pcie_remove(struct platform_device *pdev) { ... pci_stop_root_bus(pp->root_bus); pci_remove_root_bus(pp->root_bus); dw_pcie_free_msi(pp); ... } Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-05-07PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify codeJisheng Zhang1-13/+8
Use devm_pci_alloc_host_bridge() to simplify the error code path. This also fixes a leak in the dw_pcie_host_init() error path. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]> CC: [email protected] # v4.13+
2019-05-07PCI: dwc: Free MSI in dw_pcie_host_init() error pathJisheng Zhang1-3/+6
If we ever did MSI-related initializations, we need to call dw_pcie_free_msi() in the error code path. Remove the IS_ENABLED(CONFIG_PCI_MSI) check for MSI init because pci_msi_enabled() already has a stub for !CONFIG_PCI_MSI. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-05-07PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()Jisheng Zhang1-4/+8
To avoid a memory leak, free the page allocated for MSI IRQ in dw_pcie_free_msi(). Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-05-07PCI: dwc: Fix dw_pcie_free_msi() if msi_irq is invalidJisheng Zhang1-2/+4
Check msi_irq variable before calling irq_set_chained_handler() and irq_set_handler_data(), lest we call those functions for an invalid MSI IRQ. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Gustavo Pimentel <[email protected]>
2019-04-15PCI: dwc: Enable iATU unroll for endpoint tooKishon Vijay Abraham I1-19/+0
iatu_unroll_enabled flag is set only for Designware in host mode. However iATU unroll can be applicable for endpoint mode too. Set iatu_unroll_enabled flag in dw_pcie_setup() which is common for both host mode and endpoint mode. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-04-04PCI: dwc: Remove default MSI initialization for platform specific MSI chipsKishon Vijay Abraham I1-11/+13
Platforms which populate msi_host_init() have their own MSI controller logic. Writing to MSI control registers on platforms which do not use Designware's MSI controller logic might have side effects. To be safe, do not write to MSI control registers if the platform uses its own MSI controller logic instead of Designware's MSI one. Signed-off-by: Kishon Vijay Abraham I <[email protected]> [[email protected]: updated commit log] Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-04-04PCI: dwc: Remove Keystone specific dw_pcie_host_opsKishon Vijay Abraham I1-36/+14
Now that Keystone started using its own msi_irq_chip, remove Keystone specific callback functions defined in dw_pcie_host_ops. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-04-04PCI: keystone: Use Keystone specific msi_irq_chipKishon Vijay Abraham I1-3/+2
Use Keystone specific msi_irq_chip to configure the MSI controller logic in the PCIe keystone wrapper instead of using the default Designware msi_irq chip (dw_pci_msi_bottom_irq_chip) with callback functions for configuring the Keystone MSI controller. This will help to remove Keystone specific callback functions added in dw_pcie_host_ops. Move the default msi_irq_chip assignment to dw_pcie_host_init since platforms that doesn't use the default msi_irq_chip will assign msi_irq_chip in the msi_host_init() callback. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-04-04PCI: dwc: Add support to use non default msi_irq_chipKishon Vijay Abraham I1-1/+4
Platforms using DesignWare IP use dw_pci_msi_bottom_irq_chip for configuring the MSI controller logic within the DesignWare IP. However certain platforms like Keystone (K2G) which uses DesignWare IP have their own MSI controller logic. For handling such platforms, the irqchip ops use msi_irq_ack(), msi_set_irq(), msi_clear_irq() callback functions. Add support to use different msi_irq_chip with default set to dw_pci_msi_bottom_irq_chip. This is in preparation to get rid of msi_irq_ack(), msi_set_irq(), msi_clear_irq() and other Keystone specific dw_pcie_host_ops. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]>
2019-03-01PCI: dwc: skip MSI init if MSIs have been explicitly disabledLucas Stach1-1/+1
Since 7c5925afbc58 (PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API) the MSI init claims one of the controller IRQs as a chained IRQ line for the MSI controller. On some designs, like the i.MX6, this line is shared with a PCIe legacy IRQ. When the line is claimed for the MSI domain, any device trying to use this legacy IRQs will fail to request this IRQ line. As MSI and legacy IRQs are already mutually exclusive on the DWC core, as the core won't forward any legacy IRQs once any MSI has been enabled, users wishing to use legacy IRQs already need to explictly disable MSI support (usually via the pci=nomsi kernel commandline option). To avoid any issues with MSI conflicting with legacy IRQs, just skip all of the DWC MSI initalization, including the IRQ line claim, when MSI is disabled. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Tested-by: Tim Harvey <[email protected]> Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Gustavo Pimentel <[email protected]> Cc: [email protected]
2019-03-01PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()Andrey Smirnov1-38/+23
Default implementation of pcie_rd_other_conf() and dw_pcie_wd_other_conf() share more than 80% of their code. Move shared code into a dedicated subroutine and convert pcie_rd_other_conf() and dw_pcie_wd_other_conf() to use it. No functional change intended. Signed-off-by: Andrey Smirnov <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Gustavo Pimentel <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Chris Healy <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Leonard Crestez <[email protected]> Cc: "A.s. Dong" <[email protected]> Cc: Richard Zhu <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected]
2019-02-01PCI: dwc: Replace bit rotation operation (1 << bit) with BIT(bit)Gustavo Pimentel1-3/+3
Replace bit rotation operation (1 << bit) with BIT(bit), which simplifies code reading. No functional change is intended. Signed-off-by: Gustavo Pimentel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Jingoo Han <[email protected]>
2019-02-01PCI: dwc: Improve code readability and simplify mask/unmask operationsGustavo Pimentel1-6/+6
Improve code readability and simplifies mask/unmask operations by inverting the applied logic (no functional change is intended). Replace variable name from irq_status to irq_mask, since its goal is to keep track of which interrupts are masked or not. Signed-off-by: Gustavo Pimentel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Jingoo Han <[email protected]>
2019-02-01PCI: dwc: Rename variable name from data to d on dw_pcie_irq_domain_free()Gustavo Pimentel1-3/+3
Rename variable from data to d to maintain consistency between driver functions. No functional change is intended. Signed-off-by: Gustavo Pimentel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Jingoo Han <[email protected]>
2019-02-01PCI: dwc: Rename variable name from data to d on dw_pci_msi_set_affinity()Gustavo Pimentel1-1/+1
Rename variable from data to d to maintain consistency between driver functions. No functional change is intended. Signed-off-by: Gustavo Pimentel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Jingoo Han <[email protected]>
2019-02-01PCI: dwc: Rename variable name from data to d on dw_pci_setup_msi_msg()Gustavo Pimentel1-5/+5
Rename variable from data to d to maintain consistency between driver functions, such as dw_pci_setup_msi_msg(). No functional change is intended. Signed-off-by: Gustavo Pimentel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Jingoo Han <[email protected]>
2019-02-01PCI: dwc: Rename variable name from data to d on dw_pci_bottom_mask/unmask()Gustavo Pimentel1-10/+10
Rename variable from data to d to maintain consistency between driver functions, such as dw_msi_mask_irq() and dw_msi_unmask_irq(). No functional change is intended. Signed-off-by: Gustavo Pimentel <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Jingoo Han <[email protected]>
2019-01-02Merge branch 'remotes/lorenzo/pci/dwc-msi'Bjorn Helgaas1-13/+24
- Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) * remotes/lorenzo/pci/dwc-msi: PCI: dwc: Move interrupt acking into the proper callback PCI: dwc: Take lock when ACKing an interrupt PCI: dwc: Use interrupt masking instead of disabling
2018-12-18PCI: dwc: Don't hard-code DBI/ATU offsetStephen Warren1-0/+3
The DWC PCIe core contains various separate register spaces: DBI, DBI2, ATU, DMA, etc. The relationship between the addresses of these register spaces is entirely determined by the implementation of the IP block, not by the IP block design itself. Hence, the DWC driver must not make assumptions that one register space can be accessed at a fixed offset from any other register space. To avoid such assumptions, introduce an explicit/separate register pointer for the ATU register space. In particular, the current assumption is not valid for NVIDIA's T194 SoC. The ATU register space is only used on systems that require unrolled ATU access. This property is detected at run-time for host controllers, and when this is detected, this patch provides a default value for atu_base that matches the previous assumption re: register layout. An alternative would be to update all drivers for HW that requires unrolled access to explicitly set atu_base. However, it's hard to tell which drivers would require atu_base to be set. The unrolled property is not detected for endpoint systems, and so any endpoint driver that requires unrolled access must explicitly set the iatu_unroll_enabled flag (none do at present), and so a check is added to require the driver to also set atu_base while at it. Signed-off-by: Stephen Warren <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Acked-by: Gustavo Pimentel <[email protected]> Acked-by: Vidya Sagar <[email protected]>
2018-12-11PCI: dwc: Move interrupt acking into the proper callbackMarc Zyngier1-6/+7
The write to the status register is really an ACK for the HW, and should be treated as such by the driver. Let's move it to the irq_ack() callback, which will prevent people from moving it around in order to paper over other bugs. Fixes: 8c934095fa2f ("PCI: dwc: Clear MSI interrupt status after it is handled, not before") Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Link: https://lore.kernel.org/linux-pci/[email protected]/ Reported-by: Trent Piepho <[email protected]> Tested-by: Niklas Cassel <[email protected]> Tested-by: Gustavo Pimentel <[email protected]> Tested-by: Stanimir Varbanov <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> [[email protected]: updated commit log] Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: [email protected]
2018-12-11PCI: dwc: Take lock when ACKing an interruptMarc Zyngier1-0/+5
Bizarrely, there is no lock taken in the irq_ack() helper. This puts the ACK callback provided by a specific platform in a awkward situation where there is no synchronization that would be expected on other callback. Introduce the required lock, giving some level of uniformity among callbacks. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Link: https://lore.kernel.org/linux-pci/[email protected]/ Tested-by: Niklas Cassel <[email protected]> Tested-by: Gustavo Pimentel <[email protected]> Tested-by: Stanimir Varbanov <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> [[email protected]: updated commit log] Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: [email protected]
2018-12-11PCI: dwc: Use interrupt masking instead of disablingMarc Zyngier1-7/+12
The dwc driver is showing an interesting level of brokeness, as it insists on using the enable/disable set of registers to mask/unmask MSIs, meaning that an MSIs being generated while the interrupt is in that "disabled" state will simply be lost. Let's move to the mask/unmask set of registers, which offers the expected semantics. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Link: https://lore.kernel.org/linux-pci/[email protected]/ Tested-by: Niklas Cassel <[email protected]> Tested-by: Gustavo Pimentel <[email protected]> Tested-by: Stanimir Varbanov <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> [[email protected]: updated commit log] Signed-off-by: Lorenzo Pieralisi <[email protected]> Cc: [email protected]
2018-07-18PCI: designware: Fix I/O space page leakSergei Shtylyov1-1/+2
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver is left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The DesignWare PCIe controller driver has the same issue. Replace devm_pci_remap_iospace() with a devm_ managed version to fix the bug. Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic") Signed-off-by: Sergei Shtylyov <[email protected]> [[email protected]: updated the commit log] Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Jingoo Han <[email protected]>
2018-06-08PCI: Collect all native drivers under drivers/pci/controller/Shawn Lin1-0/+722
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Shawn Lin <[email protected]> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.