| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The binary content of nvmem devices is available to the user so in the
easiest cases, finding the content of a cell is rather easy as it is
just a matter of looking at a known and fixed offset. However, nvmem
layouts have been recently introduced to cope with more advanced
situations, where the offset and size of the cells is not known in
advance or is dynamic. When using layouts, more advanced parsers are
used by the kernel in order to give direct access to the content of each
cell, regardless of its position/size in the underlying
device. Unfortunately, these information are not accessible by users,
unless by fully re-implementing the parser logic in userland.
Let's expose the cells and their content through sysfs to avoid these
situations. Of course the relevant NVMEM sysfs Kconfig option must be
enabled for this support to be available.
Not all nvmem devices expose cells. Indeed, the .bin_attrs attribute
group member will be filled at runtime only when relevant and will
remain empty otherwise. In this case, as the cells attribute group will
be empty, it will not lead to any additional folder/file creation.
Exposed cells are read-only. There is, in practice, everything in the
core to support a write path, but as I don't see any need for that, I
prefer to keep the interface simple (and probably safer). The interface
is documented as being in the "testing" state which means we can later
add a write attribute if though relevant.
Signed-off-by: Miquel Raynal <[email protected]>
Tested-by: Rafał Miłecki <[email protected]>
Tested-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Current layout support was initially written without modules support in
mind. When the requirement for module support rose, the existing base
was improved to adopt modularization support, but kind of a design flaw
was introduced. With the existing implementation, when a storage device
registers into NVMEM, the core tries to hook a layout (if any) and
populates its cells immediately. This means, if the hardware description
expects a layout to be hooked up, but no driver was provided for that,
the storage medium will fail to probe and try later from
scratch. Even if we consider that the hardware description shall be
correct, we could still probe the storage device (especially if it
contains the rootfs).
One way to overcome this situation is to consider the layouts as
devices, and leverage the native notifier mechanism. When a new NVMEM
device is registered, we can populate its nvmem-layout child, if any,
and wait for the matching to be done in order to get the cells (the
waiting can be easily done with the NVMEM notifiers). If the layout
driver is compiled as a module, it should automatically be loaded. This
way, there is no strong order to enforce, any NVMEM device creation
or NVMEM layout driver insertion will be observed as a new event which
may lead to the creation of additional cells, without disturbing the
probes with costly (and sometimes endless) deferrals.
In order to achieve that goal we create a new bus for the nvmem-layouts
with minimal logic to match nvmem-layout devices with nvmem-layout
drivers. All this infrastructure code is created in the layouts.c file.
Signed-off-by: Miquel Raynal <[email protected]>
Tested-by: Rafał Miłecki <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This hook is meant to be used by any provider and instantiating a layout
just for this is useless. Let's instead move this hook to the nvmem
device and add it to the config structure to be easily shared by the
providers.
While at moving this hook, rename it ->fixup_dt_cell_info() to clarify
its main intended purpose.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The layout entry is not used and will anyway be made useless by the new
layout bus infrastructure coming next, so drop it. While at it, clarify
the kdoc entry.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Before adding all the NVMEM layout bus infrastructure to the core, let's
move the main nvmem_device structure in an internal header, only
available to the core. This way all the additional code can be added in
a dedicated file in order to keep the current core file tidy.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
nvmem-consumer.h is included by consumer devices, extracting data from
NVMEM devices whereas nvmem-provider.h is included by devices providing
NVMEM content.
The only users of of_nvmem_layout_get_container() outside of the core
are layout drivers, so better move its prototype to nvmem-provider.h.
While we do so, we also move the kdoc associated with the function to
the header rather than the .c file.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This driver uses MMIO access for reading NVRAM from a flash device.
Underneath there is a flash controller that reads data and provides
mapping window.
Using MMIO interface affects controller configuration and may break real
controller driver. It was reported by multiple users of devices with
NVRAM stored on NAND.
Modify driver to read & cache NVRAM content during init and use that
copy to provide NVMEM data when requested. On NAND flashes due to their
alignment NVRAM partitions can be quite big (1 MiB and more) while
actual NVRAM content stays quite small (usually 16 to 32 KiB). To avoid
allocating so much memory check for actual data length.
Link: https://lore.kernel.org/linux-mtd/CACna6rwf3_9QVjYcM+847biTX=K0EoWXuXcSMkJO1Vy_5vmVqA@mail.gmail.com/
Fixes: 3fef9ed0627a ("nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM")
Cc: <[email protected]>
Cc: Arınç ÜNAL <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Scott Branden <[email protected]>
Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Arınç ÜNAL <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Two series lived in parallel for some time, which led to this situation:
- The nvmem-layout container is used for dynamic layouts
- We now expect fixed layouts to also use the nvmem-layout container but
this does not require any additional driver, the support is built-in the
nvmem core.
Ensure we don't refuse to probe for wrong reasons.
Fixes: 27f699e578b1 ("nvmem: core: add support for fixed cells *layout*")
Cc: [email protected]
Reported-by: Luca Ceresoli <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Tested-by: Rafał Miłecki <[email protected]>
Tested-by: Luca Ceresoli <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
|
|
This reverts commit 517f14d9cf3533d5ab4fded195ab6f80a92e378f.
Config option "no_of_node" is no longer needed since adding a more
explicit and targeted option "add_legacy_fixed_of_cells".
That "no_of_node" config option was needed *earlier* to help mtd's case.
DT nodes of MTD partitions (that are also NVMEM devices) may contain
subnodes. Those SHOULD NOT be treated as NVMEM fixed cells.
To prevent NVMEM core code from parsing subnodes a "no_of_node" option
was added (and set to true in mtd) to make for_each_child_of_node() in
NVMEM a no-op. That was a bit hacky because it was messing with
"of_node" pointer to achieve some side-effect.
With the introduction of "add_legacy_fixed_of_cells" config option
things got more explicit. MTD subsystem simply tells NVMEM when to look
for fixed cells and there is no need to hack "of_node" pointer anymore.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Binding for fixed NVMEM cells defined directly as NVMEM device subnodes
has been deprecated. It has been replaced by the "fixed-layout" NVMEM
layout binding.
New syntax is meant to be clearer and should help avoiding imprecise
bindings.
NVMEM subsystem already supports the new binding. It should be a good
idea to limit support for old syntax to existing drivers that actually
support & use it (we can't break backward compatibility!). That way we
additionally encourage new bindings & drivers to ignore deprecated
binding.
It wasn't clear (to me) if rtc and w1 code actually uses old syntax
fixed cells. I enabled them to don't risk any breakage.
Signed-off-by: Rafał Miłecki <[email protected]>
[for meson-{efuse,mx-efuse}.c]
Acked-by: Martin Blumenstingl <[email protected]>
[for mtk-efuse.c, nvmem/core.c, nvmem-provider.h]
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
[MT8192, MT8195 Chromebooks]
Tested-by: AngeloGioacchino Del Regno <[email protected]>
[for microchip-otpc.c]
Reviewed-by: Claudiu Beznea <[email protected]>
[SAMA7G5-EK]
Tested-by: Claudiu Beznea <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
On some platforms like sc7280 on non-ChromeOS devices the core clock
cannot be touched by Linux so we cannot provide it. Mark it as optional
as accessing qfprom for reading works without it but we still prohibit
writing if we cannot provide the clock.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The nregs for i.MX6ULL should be 80 per fuse map, correct it.
Fixes: ffbc34bf0e9c ("nvmem: imx-ocotp: Implement i.MX6ULL/ULZ support")
Cc: [email protected]
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The nregs for i.MX6UL should be 144 per fuse map, correct it.
Fixes: 4aa2b4802046 ("nvmem: octop: Add support for imx6ul")
Cc: [email protected]
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The nregs for i.MX6SLL should be 80 per fuse map, correct it.
Fixes: 6da27821a6f5 ("nvmem: imx-ocotp: add support for imx6sll")
Cc: [email protected]
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Tell listeners a new layout was introduced and is now available.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use of_nvmem_layout_get_container() instead of hardcoding it.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Michael Walle <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Let's pack all the cells creation in one place, so they are all created
before we add the nvmem device.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Michael Walle <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We are moving toward replacing zero-length arrays with C99 flexible-array
members since they are deprecated. Therefore, the new DECLARE_FLEX_ARRAY()
helper macro should be used to replace the zero-length array declaration.
This fixes warnings such as:
./drivers/nvmem/u-boot-env.c:50:9-13: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Atul Raut <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
For some of the Qualcomm SoC's, it is possible that
some of the fuse regions or entire qfprom region is
protected from non-secure access. In such situations,
the OS will have to use secure calls to read the region.
With that motivation, add secure qfprom driver.
Signed-off-by: Komal Bajaj <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Fix typo where "driver" was meant instead of "drive".
While at it, also capitalize "OTP".
Signed-off-by: Diederik de Haas <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add SFP (Security Fuse Processor) read support for NXP (Freescale)
QorIQ series SOC's.
This patch adds support for the T1023 SOC using the SFP offset from
the existing T1023 device tree. In theory this should also work for
T1024, T1014 and T1013 which uses the same SFP base offset.
Signed-off-by: Richard Alpe <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use devm_platform_ioremap_resource() and
devm_platform_get_and_ioremap_resource() to simplify code.
BTW convert to use dev_err_probe() instead of open it.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <[email protected]>
Acked-by: Jernej Skrabec <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It is reasonable to declare multiple nvmem blocks. Unless a unique 'id'
is passed in for each block there may be name clashes.
Avoid this by using the magic token NVMEM_DEVID_AUTO.
Fixes: 5a3fa75a4d9c ("nvmem: Add driver to expose reserved memory as nvmem")
Signed-off-by: Phil Elwell <[email protected]>
Signed-off-by: Ivan T. Ivanov <[email protected]>
Reviewed-by: Stefan Wahren <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This adds support for the "fixed-layout" NVMEM layout binding. It allows
defining NVMEM cells in a layout DT node named "nvmem-layout".
While NVMEM subsystem supports layout drivers it has been discussed that
"fixed-layout" may actually be supperted internally. It's because:
1. It's a very basic layout
2. It allows sharing code with legacy syntax parsing
3. It's safer for soc_device_match() due to -EPROBE_DEFER
4. This will make the syntax transition easier
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Michael Walle <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add i.MX93 OCOTP support. i.MX93 OCOTP has two parts: Fuse shadow
block(fsb) and fuse managed by ELE. The FSB part could be directly
accessed with MMIO, the ELE could only be accessed with ELE API.
Currently the ELE API is not ready, so NULL function callback is used,
but it was tested with downstream ELE API.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
@xilinx.com is still working but better to switch to new amd.com after
AMD/Xilinx acquisition.
Signed-off-by: Michal Simek <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add support for the OTP memory device found on the Rockchip RK3588 SoC.
While here, remove the unnecessary 'void *' casts in the OF device ID
table.
Co-developed-by: Finley Xiao <[email protected]>
Signed-off-by: Finley Xiao <[email protected]>
Signed-off-by: Cristian Ciocaltea <[email protected]>
Tested-by: Vincent Legoll <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Enhance error handling in the probe function by making use of
dev_err_probe(), which ensures the error code is always printed, in
addition to the specified error message.
Signed-off-by: Cristian Ciocaltea <[email protected]>
Tested-by: Vincent Legoll <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In preparation to support new Rockchip OTP memory devices having
specific reset configurations, switch devm_reset_control_get() to
devm_reset_control_array_get_exclusive().
Signed-off-by: Cristian Ciocaltea <[email protected]>
Tested-by: Vincent Legoll <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In preparation to support additional Rockchip OTP memory devices with
different register layout, generalize rockchip_otp_wait_status() to
accept a new parameter for specifying the offset of the status register.
Signed-off-by: Cristian Ciocaltea <[email protected]>
Tested-by: Vincent Legoll <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In preparation to support new Rockchip OTP memory devices with different
clock configurations and register layout, extend rockchip_data struct
with the related members: clks, num_clks, reg_read.
Additionally, to avoid managing redundant driver data, drop num_clks
member from rockchip_otp struct and update all references to point to
the equivalent member in rockchip_data.
Signed-off-by: Cristian Ciocaltea <[email protected]>
Tested-by: Vincent Legoll <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
1. Parse ASCII MAC format into byte based
2. Calculate relative addresses based on index argument
Signed-off-by: Rafał Miłecki <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Not just i.MX8M, but all i.MX6/7 (and subtypes) need to reverse the
MAC address read from fuses. Exceptions are i.MX6SLL and i.MX7ULP which
do not support ethernet at all.
Fixes: d0221a780cbc ("nvmem: imx-ocotp: add support for post processing")
Signed-off-by: Alexander Stein <[email protected]>
Tested-by: Richard Leitner <[email protected]> # imx6q
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
static
smatch reports
drivers/nvmem/imx-ocotp.c:599:21: warning: symbol
'imx_ocotp_layout' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Smatch reports:
drivers/nvmem/sunplus-ocotp.c:205 sp_ocotp_probe()
warn: 'otp->clk' from clk_prepare() not released on lines: 196.
In the function sp_ocotp_probe(struct platform_device *pdev), otp->clk may
not be released before return.
To fix this issue, using function clk_unprepare() to release otp->clk.
Fixes: 8747ec2e9762 ("nvmem: Add driver for OCOTP in Sunplus SP7021")
Signed-off-by: Yi Yingao <[email protected]>
Reviewed-by: Dongliang Mu <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"The summary of the changes for this pull requests is:
- Song Liu's new struct module_memory replacement
- Nick Alcock's MODULE_LICENSE() removal for non-modules
- My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded prior
to allocating the final module memory with vmalloc and the respective
debug code it introduces to help clarify the issue. Although the
functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to
have been picked up. Folks on larger CPU systems with modules will
want to just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details:
The functional change change in this pull request is the very first
patch from Song Liu which replaces the 'struct module_layout' with a
new 'struct module_memory'. The old data structure tried to put
together all types of supported module memory types in one data
structure, the new one abstracts the differences in memory types in a
module to allow each one to provide their own set of details. This
paves the way in the future so we can deal with them in a cleaner way.
If you look at changes they also provide a nice cleanup of how we
handle these different memory areas in a module. This change has been
in linux-next since before the merge window opened for v6.3 so to
provide more than a full kernel cycle of testing. It's a good thing as
quite a bit of fixes have been found for it.
Jason Baron then made dynamic debug a first class citizen module user
by using module notifier callbacks to allocate / remove module
specific dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area is
active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf").
Nick has been working on this *for years* and AFAICT I was the only
one to suggest two alternatives to this approach for tooling. The
complexity in one of my suggested approaches lies in that we'd need a
possible-obj-m and a could-be-module which would check if the object
being built is part of any kconfig build which could ever lead to it
being part of a module, and if so define a new define
-DPOSSIBLE_MODULE [0].
A more obvious yet theoretical approach I've suggested would be to
have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as
well but that means getting kconfig symbol names mapping to modules
always, and I don't think that's the case today. I am not aware of
Nick or anyone exploring either of these options. Quite recently Josh
Poimboeuf has pointed out that live patching, kprobes and BPF would
benefit from resolving some part of the disambiguation as well but for
other reasons. The function granularity KASLR (fgkaslr) patches were
mentioned but Joe Lawrence has clarified this effort has been dropped
with no clear solution in sight [1].
In the meantime removing module license tags from code which could
never be modules is welcomed for both objectives mentioned above. Some
developers have also welcomed these changes as it has helped clarify
when a module was never possible and they forgot to clean this up, and
so you'll see quite a bit of Nick's patches in other pull requests for
this merge window. I just picked up the stragglers after rc3. LWN has
good coverage on the motivation behind this work [2] and the typical
cross-tree issues he ran into along the way. The only concrete blocker
issue he ran into was that we should not remove the MODULE_LICENSE()
tags from files which have no SPDX tags yet, even if they can never be
modules. Nick ended up giving up on his efforts due to having to do
this vetting and backlash he ran into from folks who really did *not
understand* the core of the issue nor were providing any alternative /
guidance. I've gone through his changes and dropped the patches which
dropped the module license tags where an SPDX license tag was missing,
it only consisted of 11 drivers. To see if a pull request deals with a
file which lacks SPDX tags you can just use:
./scripts/spdxcheck.py -f \
$(git diff --name-only commid-id | xargs echo)
You'll see a core module file in this pull request for the above, but
that's not related to his changes. WE just need to add the SPDX
license tag for the kernel/module/kmod.c file in the future but it
demonstrates the effectiveness of the script.
Most of Nick's changes were spread out through different trees, and I
just picked up the slack after rc3 for the last kernel was out. Those
changes have been in linux-next for over two weeks.
The cleanups, debug code I added and final fix I added for modules
were motivated by David Hildenbrand's report of boot failing on a
systems with over 400 CPUs when KASAN was enabled due to running out
of virtual memory space. Although the functional change only consists
of 3 lines in the patch "module: avoid allocation if module is already
present and ready", proving that this was the best we can do on the
modules side took quite a bit of effort and new debug code.
The initial cleanups I did on the modules side of things has been in
linux-next since around rc3 of the last kernel, the actual final fix
for and debug code however have only been in linux-next for about a
week or so but I think it is worth getting that code in for this merge
window as it does help fix / prove / evaluate the issues reported with
larger number of CPUs. Userspace is not yet fixed as it is taking a
bit of time for folks to understand the crux of the issue and find a
proper resolution. Worst come to worst, I have a kludge-of-concept [3]
of how to make kernel_read*() calls for modules unique / converge
them, but I'm currently inclined to just see if userspace can fix this
instead"
Link: https://lore.kernel.org/all/Y/[email protected]/ [0]
Link: https://lkml.kernel.org/r/[email protected] [1]
Link: https://lwn.net/Articles/927569/ [2]
Link: https://lkml.kernel.org/r/[email protected] [3]
* tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits)
module: add debugging auto-load duplicate module support
module: stats: fix invalid_mod_bytes typo
module: remove use of uninitialized variable len
module: fix building stats for 32-bit targets
module: stats: include uapi/linux/module.h
module: avoid allocation if module is already present and ready
module: add debug stats to help identify memory pressure
module: extract patient module check into helper
modules/kmod: replace implementation with a semaphore
Change DEFINE_SEMAPHORE() to take a number argument
module: fix kmemleak annotations for non init ELF sections
module: Ignore L0 and rename is_arm_mapping_symbol()
module: Move is_arm_mapping_symbol() to module_symbol.h
module: Sync code of is_arm_mapping_symbol()
scripts/gdb: use mem instead of core_layout to get the module address
interconnect: remove module-related code
interconnect: remove MODULE_LICENSE in non-modules
zswap: remove MODULE_LICENSE in non-modules
zpool: remove MODULE_LICENSE in non-modules
x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules
...
|
|
Since commit 8b41fc4454e ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <[email protected]>
Suggested-by: Luis Chamberlain <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Hitomi Hasegawa <[email protected]>
Cc: Srinivas Kandagatla <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
storage-class-specifier to static
smatch reports
drivers/nvmem/layouts/sl28vpd.c:144:21: warning: symbol
'sl28vpd_layout' was not declared. Should it be static?
This variable is only used in one file so it should be static.
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The MODULE_ALIAS macro is misused here as it carries the
description. There is currently no relevant alias to provide so let's
just drop it.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Stop open-coding the module init/exit functions. Use the
module_nvmem_layout_driver() instead.
Signed-off-by: Miquel Raynal <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|