| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We are not using ndev->stats for rx_packets and rx_bytes anymore.
Instead, we use per CPU stats which are collated in
am65_cpsw_nuss_ndo_get_stats().
Fix RX statistics for XDP_TX and XDP_REDIRECT cases.
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Acked-by: Julien Panis <[email protected]>
Reviewed-by: MD Danish Anwar <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
If number of TX queues are set to 1 we get a NULL pointer
dereference during XDP_TX.
~# ethtool -L eth0 tx 1
~# ./xdp-trafficgen udp -A <ipv6-src> -a <ipv6-dst> eth0 -t 2
Transmitting on eth0 (ifindex 2)
[ 241.135257] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
Fix this by using actual TX queues instead of max TX queues
when picking the TX channel in am65_cpsw_ndo_xdp_xmit().
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Acked-by: Julien Panis <[email protected]>
Reviewed-by: MD Danish Anwar <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The following XDP_DROP test from [1] stalls the interface after
250 packets.
~# xdb-bench drop -m native eth0
This is because new RX requests are never queued. Fix that.
The below XDP_TX test from [1] fails with a warning
[ 499.947381] XDP_WARN: xdp_update_frame_from_buff(line:277): Driver BUG: missing reserved tailroom
~# xdb-bench tx -m native eth0
Fix that by using PAGE_SIZE during xdp_init_buf().
In XDP_REDIRECT case only 1 packet was processed in rx_poll.
Fix it to process up to budget packets.
Fix all XDP error cases to call trace_xdp_exception() and drop the packet
in am65_cpsw_run_xdp().
[1] xdp-tools suite https://github.com/xdp-project/xdp-tools
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Acked-by: Julien Panis <[email protected]>
Reviewed-by: MD Danish Anwar <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This commit introduces implementations of three functions:
.port_fdb_dump
.port_fdb_add
.port_fdb_del
The FDB database organization is the same as in other old Vitesse chips:
It has 2048 rows and 4 columns (buckets). The row index is calculated by
the hash function 'vsc73xx_calc_hash' and the FDB entry must be placed
exactly into row[hash]. The chip selects the bucket number by itself.
Signed-off-by: Pawel Dembicki <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-08-30
The first patch is by Duy Nguyen and document the R-Car V4M support in
the rcar-canfd DT bindings.
Frank Li's patch converts the microchip,mcp251x.txt DT bindings
documentation to yaml.
A patch by Zhang Changzhong update a comment in the j1939 CAN
networking stack.
Stefan Mätje's patch updates the CAN configuration netlink code, so
that the bit timing calculation doesn't work on stale
can_priv::ctrlmode data.
Martin Jocic contributes a patch for the kvaser_pciefd driver to
convert some ifdefs into if (IS_ENABLED()).
The last patch is by Yan Zhen and simplifies the probe() function of
the kvaser USB driver by using dev_err_probe().
* tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_usb: Simplify with dev_err_probe()
can: kvaser_pciefd: Use IS_ENABLED() instead of #ifdef
can: netlink: avoid call to do_set_data_bittiming callback with stale can_priv::ctrlmode
can: j1939: use correct function name in comment
dt-bindings: can: convert microchip,mcp251x.txt to yaml
dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-08-30
The first patch is by Kuniyuki Iwashima for the CAN BCM protocol that
adds a missing proc entry removal when a device unregistered.
Simon Horman fixes the cleanup in the error cleanup path of the m_can
driver's open function.
Markus Schneider-Pargmann contributes 7 fixes for the m_can driver,
all related to the recently added IRQ coalescing support.
The next 2 patches are by me, target the mcp251xfd driver and fix ring
and coalescing configuration problems when switching from CAN-CC to
CAN-FD mode.
Simon Arlott's patch fixes a possible deadlock in the mcp251x driver.
The last patch is by Martin Jocic for the kvaser_pciefd driver and
fixes a problem with lost IRQs, which result in starvation, under high
load situations.
* tag 'linux-can-fixes-for-6.11-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_pciefd: Use a single write when releasing RX buffers
can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
can: mcp251xfd: mcp251xfd_ring_init(): check TX-coalescing configuration
can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode
can: m_can: Limit coalescing to peripheral instances
can: m_can: Reset cached active_interrupts on start
can: m_can: disable_all_interrupts, not clear active_interrupts
can: m_can: Do not cancel timer from within timer
can: m_can: Remove m_can_rx_peripheral indirection
can: m_can: Remove coalesing disable in isr during suspend
can: m_can: Reset coalescing during suspend/resume
can: m_can: Release irq on error in m_can_open
can: bcm: Remove proc entry when dev is unregistered.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add support for RTL8126A rev.b. Its XID is 0x64a. It is basically
based on the one with XID 0x649, but with different firmware file.
Signed-off-by: ChunHao Lin <[email protected]>
Reviewed-by: Heiner Kallweit <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This reverts commit 166a490f59ac10340ee5330e51c15188ce2a7f8f.
There are several reports that this commit breaks system suspend on some specific
Lenovo platforms. Since there is no fix available, for now revert this commit
to make suspend work again on those platforms.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219196
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2301921
Cc: <[email protected]> # 6.10.x: d3e154d7776b: Revert "wifi: ath11k: restore country code during resume"
Cc: <[email protected]> # 6.10.x
Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
This reverts commit 7f0343b7b8710436c1e6355c71782d32ada47e0c.
We are going to revert commit 166a490f59ac ("wifi: ath11k: support hibernation"), on
which this commit depends. With that commit reverted, this one is not needed any
more, so revert this commit first.
Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
This callback doesn't seem to serve much purpose, and prevents things
like:
- systemd.link files from disabling autonegotiation
- carrier detection in NetworkManager
- any ethtool setting
prior to userspace bringing the link up.
The only fear I can think of is accessing unclocked resources due to
pm_runtime, but ethtool ioctls handle that as of commit
f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool ioctl ops")
Reviewed-by: Dmitry Dolenko <[email protected]>
Tested-by: Dmitry Dolenko <[email protected]>
Signed-off-by: Andrew Halaney <[email protected]>
Reviewed-by: Alexander Lobakin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Call rtnl_unlock() on this error path, before returning.
Fixes: bc23aa949aeb ("igc: Add pcie error handler support")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Gerhard Engleder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This is a clear use-after-free error. We remove it, and rely on checking
the return code of vcap_del_rule.
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/kernel-janitors/[email protected]/
Fixes: c956b9b318d9 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API")
Signed-off-by: Jens Emil Schulz Østergaard <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The scan interval option is the period in unit of second for WoWLAN
firmware to do each scan. We get the option from cfg80211 and practice it.
If the interval is too short for firmware to finish one scan, the firmware
will start next scan immediately after finishing one and the WiFi chip
could never enter idle mode to reduce power consumption.
Signed-off-by: Chin-Yen Lee <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Enable net-detect in WoWLAN stub of 8922a, and declare net-detect
support up to 8 SSIDs.
Signed-off-by: Chin-Yen Lee <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
The C2H packet of FW-IPS mode is not handled by driver in the suspend
flow, and lead to WoWLAN firmware fail to enter PS mode and even some
SER happen. So add wait function for H2C of FW-IPS mode to check driver
handle the C2H packet before disabling interrupt and make the net-detect
function work fine.
Signed-off-by: Chin-Yen Lee <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Each condition binding to the same wait should be unique. AOAC code misused
the wait of FW offload series and broke the above rule. It added another
macro to generate wait condition of WoWLAN/AOAC, but the results conflict
to the ones of FW offload series. It means that we might be completed
wrongly in logic. We don't want things work/read like this and should
have avoided this.
Fix this by adding another wait which aims for WoWLAN functions.
Fixes: ff53fce5c78b ("wifi: rtw89: wow: update latest PTK GTK info to mac80211 after resume")
Signed-off-by: Zong-Zhe Yang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
A mac_id as an instance in firmware has to be assigned for each station
including AP and connected stations. Firmware will use the mac_id to
control TX rate and do statistics.
Assignment rule is to assign mac_id to each vif when adding vif.
For station mode, sta->mac_id will reuse vif->mac_id. For AP mode,
dynamically allocate an sta->mac_id to a station, and vif->mac_id is
used to send broadcast/multicast packets which are not belong to
a station. For example,
vif->mac_id sta->mac_id
vif0 (STA mode) 0 0
vif1 (AP mode) 1 2...
By the way, remove unused RTW_BC_MC_MACID, which was planed to send
broadcast/multicast packets on fixed mac_id.
Tested-on RTL8822CE with STA + AP SCC mode.
Link: https://lore.kernel.org/linux-wireless/[email protected]/
Cc: Bitterblue Smith <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
All USB devices supported by rtw88 have the same problem: they don't
transmit beacons in AP mode. (Some?) SDIO devices are also affected.
The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL
before uploading the beacon reserved page, so don't clear the bit for
USB and SDIO devices.
Tested with RTL8811CU and RTL8723DU.
Cc: <[email protected]> # 6.6.x
Signed-off-by: Bitterblue Smith <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
The maximum CPT credits that RXC can use are now configurable on CN10KA B0
through a hardware CSR. This patch sets the default value to optimize peak
performance, aligning it with other chip versions.
Signed-off-by: Srujana Challa <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch modifies the driver to prevent access to RXC hardware
registers on the CN10KB, as RXC is not available on this chip.
Signed-off-by: Srujana Challa <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch updates the driver to use a dynamic number of vectors instead
of a hard-coded value. This change accommodates the CN10KB, which has 2
vectors, unlike the previously supported chips that have 3 vectors.
Signed-off-by: Srujana Challa <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
0x7d and 0x7e bytes are meant to be escaped in the data portion of
frames, but this didn't occur since next_chunk_len() had an off-by-one
error. That also resulted in the final byte of a payload being written
as a separate tty write op.
The chunk prior to an escaped byte would be one byte short, and the
next call would never test the txpos+1 case, which is where the escaped
byte was located. That meant it never hit the escaping case in
mctp_serial_tx_work().
Example Input: 01 00 08 c8 7e 80 02
Previous incorrect chunks from next_chunk_len():
01 00 08
c8 7e 80
02
With this fix:
01 00 08 c8
7e
80 02
Cc: [email protected]
Fixes: a0c2ccd9b5ad ("mctp: Add MCTP-over-serial transport binding")
Signed-off-by: Matt Johnston <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Test various edge cases of inputs that contain characters
that need escaping.
This adds a new kunit suite for mctp-serial.
Signed-off-by: Matt Johnston <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Kvaser's PCIe cards uses the KCAN FPGA IP block which has dual 4K
buffers for incoming messages shared by all (currently up to eight)
channels. While the driver processes messages in one buffer, new
incoming messages are stored in the other and so on.
The design of KCAN is such that a buffer must be fully read and then
released. Releasing a buffer will make the FPGA switch buffers. If the
other buffer contains at least one incoming message the FPGA will also
instantly issue a new interrupt, if not the interrupt will be issued
after receiving the first new message.
With IRQx interrupts, it takes a little time for the interrupt to
happen, enough for any previous ISR call to do it's business and
return, but MSI interrupts are way faster so this time is reduced to
almost nothing.
So with MSI, releasing the buffer HAS to be the very last action of
the ISR before returning, otherwise the new interrupt might be
"masked" by the kernel because the previous ISR call hasn't returned.
And the interrupts are edge-triggered so we cannot loose one, or the
ping-pong reading process will stop.
This is why this patch modifies the driver to use a single write to
the SRB_CMD register before returning.
Signed-off-by: Martin Jocic <[email protected]>
Reviewed-by: Vincent Mailhol <[email protected]>
Link: https://patch.msgid.link/[email protected]
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
dev_err_probe() is used to log an error message during the probe process
of a device.
It can simplify the error path and unify a message template.
Using this helper is totally fine even if err is known to never
be -EPROBE_DEFER.
The benefit compared to a normal dev_err() is the standardized format
of the error code, it being emitted symbolically and the fact that
the error code is returned which allows more compact error paths.
Signed-off-by: Yan Zhen <[email protected]>
Link: https://patch.msgid.link/[email protected]
mkl: fix indention
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Use the IS_ENABLED() macro to check kernel config defines instead of
ifdef. Use upper_32_bits() to avoid warnings about "right shift count
>= width of type" on systems with CONFIG_ARCH_DMA_ADDR_T_64BIT not
set. In kvaser_pciefd_write_dma_map_altera() use lower_32_bits() for
symmetry.
Signed-off-by: Martin Jocic <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
can_priv::ctrlmode
This patch moves the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_changelink in front of the evaluation of data[IFLA_CAN_BITTIMING].
This avoids a call to do_set_data_bittiming providing a stale
can_priv::ctrlmode with a CAN_CTRLMODE_FD flag not matching the
requested state when switching between a CAN Classic and CAN-FD bitrate.
In the same manner the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_validate is also moved in front of the evaluation of
data[IFLA_CAN_BITTIMING].
This is a preparation for patches where the nominal and data bittiming
may have interdependencies on the driver side depending on the
CAN_CTRLMODE_FD flag state.
Signed-off-by: Stefan Mätje <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Add "EEE: Enabled/Disabled" to dmesg for supported X710 Base-T/KR/KX
cards. According to the IEEE standard report the EEE ability and the
EEE Link Partner ability. Use the kernel's 'ethtool_keee' structure
and report EEE link modes.
Example:
dmesg | grep 'NIC Link is'
ethtool --show-eee <device>
Before:
NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None
Supported EEE link modes: Not reported
Advertised EEE link modes: Not reported
Link partner advertised EEE link modes: Not reported
After:
NIC Link is Up, 10 Gbps Full Duplex, Flow Control: None, EEE: Enabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Link partner advertised EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Aleksandr Loktionov <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Occasionally when the system goes into pm_suspend, the suspend might fail
due to a PHY access error on the network adapter. Previously, this would
have caused the whole system to fail to go to a low power state.
An example of this was reported in the following Bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=205015
[ 1663.694828] e1000e 0000:00:19.0 eth0: Failed to disable ULP
[ 1664.731040] asix 2-3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ 1665.093513] e1000e 0000:00:19.0 eth0: Hardware Error
[ 1665.596760] e1000e 0000:00:19.0: pci_pm_resume+0x0/0x80 returned 0 after 2975399 usecs
and then the system never recovers from it, and all the following suspend failed due to this
[22909.393854] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x760 [e1000e] returns -2
[22909.393858] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -2
[22909.393861] PM: Device 0000:00:1f.6 failed to suspend async: error -2
This can be avoided by changing the return values of __e1000_shutdown and
e1000e_pm_suspend functions so that they always return 0 (success). This
is consistent with what other drivers do.
If the e1000e driver encounters a hardware error during suspend, potential
side effects include slightly higher power draw or non-working wake on
LAN. This is preferred to a system-level suspend failure, and a warning
message is written to the system log, so that the user can be aware that
the LAN controller experienced a problem during suspend.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205015
Suggested-by: Dima Ruinskiy <[email protected]>
Signed-off-by: Vitaly Lifshits <[email protected]>
Tested-by: Mor Bar-Gabay <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
Signed-off-by: Shen Lichuan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As opposed to open-code, using the ERR_CAST macro clearly indicates that
this is a pointer to an error value and a type conversion was performed.
Signed-off-by: Shen Lichuan <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Martin Habets <[email protected]>
Reviewed-by: Edward Cree <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
MULTI GBT AN Control Register is IEEE Standard Register 7.32 (not a mask).
The right place should be in igc_reg.h file. In accordance with the
registers naming convention added IGC_' prefix.
Signed-off-by: Sasha Neftin <[email protected]>
Reviewed-by: Paul Menzel <[email protected]>
Tested-by: Avigail Dahan <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
According to the IEEE standard report the EEE ability (registers 7.60 and
7.62) and the EEE Link Partner ability (registers 7.61 and 7.63). Use the
kernel's 'ethtool_keee' structure and report EEE link modes.
Example:
ethtool --show-eee <device>
Before:
Advertised EEE link modes: Not reported
Link partner advertised EEE link modes: Not reported
After:
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Link partner advertised EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Avigail Dahan <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
When running the igc with XDP/ZC in busy polling mode with deferral of hard
interrupts, interrupts still happen from time to time. That is caused by
the igc task watchdog which triggers Rx interrupts periodically.
That mechanism has been introduced to overcome skb/memory allocation
failures [1]. So the Rx clean functions stop processing the Rx ring in case
of such failure. The task watchdog triggers Rx interrupts periodically in
the hope that memory became available in the mean time.
The current behavior is undesirable for real time applications, because the
driver induced Rx interrupts trigger also the softirq processing. However,
all real time packets should be processed by the application which uses the
busy polling method.
Therefore, only trigger the Rx interrupts in case of real allocation
failures. Introduce a new flag for signaling that condition.
[1] - https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=3be507547e6177e5c808544bd6a2efa2c7f1d436
Reviewed-by: Sebastian Andrzej Siewior <[email protected]>
Acked-by: Vinicius Costa Gomes <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Mor Bar-Gabay <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add support for offloading MQPRIO. The hardware has four priorities as well
as four queues. Each queue must be a assigned with a unique priority.
However, the priorities are only considered in TSN Tx mode. There are two
TSN Tx modes. In case of MQPRIO the Qbv capability is not required.
Therefore, use the legacy TSN Tx mode, which performs strict priority
arbitration.
Example for mqprio with hardware offload:
|tc qdisc replace dev ${INTERFACE} handle 100 parent root mqprio num_tc 4 \
| map 0 0 0 0 0 1 2 3 0 0 0 0 0 0 0 0 \
| queues 1@0 1@1 1@2 1@3 \
| hw 1
The mqprio Qdisc also allows to configure the `preemptible_tcs'. However,
frame preemption is not supported yet.
Tested on Intel i225 and implemented by following data sheet section 7.5.2,
Transmit Scheduling.
Signed-off-by: Kurt Kanzenbach <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Acked-by: Vinicius Costa Gomes <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Mor Bar-Gabay <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.
The original driver for TN40xx chips supports multiple PHY hardware
(AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120,
88X3310, and MV88E2010). This driver is extracted from the original
driver and modified to a PHY driver in Rust.
This has been tested with Edimax EN-9320SFP+ 10G network adapter.
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: FUJITA Tomonori <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the unified read/write API for C22 and C45 registers. The
abstractions support access to only C22 registers now. Instead of
adding read/write_c45 methods specifically for C45, a new reg module
supports the unified API to access C22 and C45 registers with trait,
by calling an appropriate phylib functions.
Reviewed-by: Trevor Gross <[email protected]>
Reviewed-by: Benno Lossin <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: FUJITA Tomonori <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-28 (igb, ice)
This series contains updates to igb and ice drivers.
Daiwei Li restores writing the TSICR (TimeSync Interrupt Cause)
register on 82850 devices to workaround a hardware issue for igb.
Dawid detaches netdev device for reset to avoid ethtool accesses during
reset causing NULL pointer dereferences on ice.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Add netif_device_attach/detach into PF reset flow
igb: Fix not clearing TimeSync interrupts for 82580
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
A range of MSIX vectors are allocated at initialization for the number
needed for RocE and L2. During run-time, if the user increases or
decreases the number of L2 rings, all the MSIX vectors have to be
freed and a new range has to be allocated. This is not optimal and
causes disruptions to RoCE traffic every time there is a change in L2
MSIX.
If the system supports dynamic MSIX allocations, use dynamic
allocation to add new L2 MSIX vectors or free unneeded L2 MSIX
vectors. RoCE traffic is not affected using this scheme.
Reviewed-by: Hongguang Gao <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If dynamic MSIX allocation is supported, additional MSIX can be
allocated at run-time without reinitializing the existing MSIX entries.
The first step to support this dynamic scheme is to allocate a large
enough bp->irq_tbl if dynamic allocation is supported.
Reviewed-by: Hongguang Gao <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use the new pci_alloc_irq_vectors() and pci_free_irq_vectors() to
replace the deprecated pci_enable_msix_range() and pci_disable_msix().
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In legacy INTX mode, a register is mapped so that the INTX handler can
read it to determine if the NIC is the source of the interrupt. This
and all the related macros are no longer needed now that INTX is no
longer supported.
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Hongguang Gao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now that we only support MSIX, the BNXT_FLAG_USING_MSIX is always true.
Remove it and any if conditions checking for it. Remove the INTX
handler and associated logic.
Reviewed-by: Kalesh AP <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Hongguang Gao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Firmware has deprecated support for legacy INTX in 2022 (since v2.27)
and INTX hasn't been tested for many years before that. INTX was
only used as a fallback mechansim in case MSIX wasn't available. MSIX
is always supported by all firmware. If MSIX capability in PCI config
space is not found during probe, abort.
Reviewed-by: Hongguang Gao <[email protected]>
Reviewed-by: Kalesh AP <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
With recent changes in the .ndo_set_vf_*() guidelines, resubmitting
this patch that was reverted eariler in 2023:
c27153682eac ("Revert "bnxt_en: Support QOS and TPID settings for the SRIOV VLAN")
Add these missing settings in the .ndo_set_vf_vlan() method.
Older firmware does not support the TPID setting so check for
proper support.
Remove the unused BNXT_VF_QOS flag.
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Sreekanth Reddy <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add support for retrieving crash dump using ethtool -w on the
supported interface.
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Vikas Gupta <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Newer firmware supports automatic DMA of crash dump to host memory
when it crashes. If the feature is supported, allocate the required
memory using the existing context memory infrastructure. Communicate
the page table containing the DMA addresses to the firmware.
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Vikas Gupta <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/faraday/ftgmac100.c
4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible")
e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
https://lore.kernel.org/[email protected]
net/ipv4/tcp.c
bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort")
edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset")
https://lore.kernel.org/[email protected]
No adjacent changes.
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|