| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We aren't "putting" buf, we're just unlinking them from our tracking in
order to let the XDP_TX and XDP_REDIRECT tx clean paths take care of the
pages when they are done with them. This rename clears up the intent.
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Brett Creeley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Here's a little debugging aid in case the device starts throwing
Tx completion errors.
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Brett Creeley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Martin Habets <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Martin Habets <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Acked-by: Shyam Sundar S K <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
pa_stats is optional in dt bindings, make it optional in driver as well.
Currently if pa_stats syscon regmap is not found driver returns -ENODEV.
Fix this by not returning an error in case pa_stats is not found and
continue generating ethtool stats without pa_stats.
Fixes: 550ee90ac61c ("net: ti: icssg-prueth: Add support for PA Stats")
Signed-off-by: MD Danish Anwar <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
dev->emacp contains an __iomem pointer and values derived
from it are used as __iomem pointers. So use this annotation
in the return type for helpers that derive pointers from dev->emacp.
Flagged by Sparse as:
.../core.c:444:36: warning: incorrect type in argument 1 (different address spaces)
.../core.c:444:36: expected unsigned int volatile [noderef] [usertype] __iomem *addr
.../core.c:444:36: got unsigned int [usertype] *
.../core.c: note: in included file:
.../core.h:416:25: warning: cast removes address space '__iomem' of expression
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ag71xx_probe is registering ag71xx_interrupt as handler for gmac0/gmac1
interrupts. The handler is trying to use napi_schedule to handle the
processing of packets. But the netif_napi_add for this device is
called a lot later in ag71xx_probe.
It can therefore happen that a still running gmac0/gmac1 is triggering the
interrupt handler with a bit from AG71XX_INT_POLL set in
AG71XX_REG_INT_STATUS. The handler will then call napi_schedule and the
napi code will crash the system because the ag->napi is not yet
initialized.
The gmcc0/gmac1 must be brought in a state in which it doesn't signal a
AG71XX_INT_POLL related status bits as interrupt before registering the
interrupt handler. ag71xx_hw_start will take care of re-initializing the
AG71XX_REG_INT_ENABLE.
This will become relevant when dual GMAC devices get added here.
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Rosen Penev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The opposite of this condition is checked above and if true, function
returns. Which means this can never be false.
Signed-off-by: Rosen Penev <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, the of variant is missing reset_control_put in error paths.
The devm variant does not require it.
Allows removing mdio_reset from the struct as it is not used outside the
function.
Signed-off-by: Rosen Penev <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Allows simplifying get_strings and avoids manual pointer manipulation.
Signed-off-by: Rosen Penev <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Taken from QCA SDK. No functional difference as same bits get applied.
Signed-off-by: Rosen Penev <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now that COMPILE_TEST is enabled, it gets flagged when building with
allmodconfig W=1 builds. Text taken from the beginning of the file.
Signed-off-by: Rosen Penev <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
While this driver is meant for MIPS only, it can be compiled on x86 just
fine. Remove pointless parentheses while at it.
Enables CI building of this driver.
Signed-off-by: Rosen Penev <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-09
The first patch is by Rob Herring and simplifies the DT parsing in the
cc770 driver.
The next 2 patches both target the rockchip_canfd driver added in the
last pull request to net-next. The first one is by Nathan Chancellor
and fixes the return type of rkcanfd_start_xmit(), the second one is
by me and fixes a 64 bit division on 32 bit platforms in
rkcanfd_timestamp_init().
* tag 'linux-can-next-for-6.12-20240909' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_timestamp_init(): fix 64 bit division on 32 bit platforms
can: rockchip_canfd: fix return type of rkcanfd_start_xmit()
net: can: cc770: Simplify parsing DT properties
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The dependency handling of the Synopsys DesignWare I2C
adapter drivers is going to be changed so that the glue
drivers for the platform and PCI buses depend on
I2C_DESIGNWARE_CORE. Right now this driver prevents that
update because it selects I2C_DESIGNWARE_PLATFORM.
To make the dependency on I2C_DESIGNWARE_PLATFORM consistent
with the other drivers in kernel that depend on it, and
allow the dependency handling of the Synopsys DesignWare I2C
drivers to be updated, change the "select" into "depends on".
Cc: Jiawen Wu <[email protected]>
Cc: Mengyuan Lou <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: [email protected]
Signed-off-by: Heikki Krogerus <[email protected]>
Acked-by: Jarkko Nikula <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Tell hardware to write back completed descriptors even when interrupts
are disabled. Otherwise, descriptors might not be written back until
the hardware can flush a full cacheline of descriptors. This can cause
unnecessary delays when traffic is light (or even trigger Tx queue
timeout).
The example scenario to reproduce the Tx timeout if the fix is not
applied:
- configure at least 2 Tx queues to be assigned to the same q_vector,
- generate a huge Tx traffic on the first Tx queue
- try to send a few packets using the second Tx queue.
In such a case Tx timeout will appear on the second Tx queue because no
completion descriptors are written back for that queue while interrupts
are disabled due to NAPI polling.
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Fixes: a5ab9ee0df0b ("idpf: add singleq start_xmit and napi poll")
Signed-off-by: Joshua Hay <[email protected]>
Co-developed-by: Michal Kubiak <[email protected]>
Signed-off-by: Michal Kubiak <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
netif_txq_maybe_stop() returns -1, 0, or 1, while
idpf_tx_maybe_stop_common() says it returns 0 or -EBUSY. As a result,
there sometimes are Tx queue timeout warnings despite that the queue
is empty or there is at least enough space to restart it.
Make idpf_tx_maybe_stop_common() inline and returning true or false,
handling the return of netif_txq_maybe_stop() properly. Use a correct
goto in idpf_tx_maybe_stop_splitq() to avoid stopping the queue or
incrementing the stops counter twice.
Fixes: 6818c4d5b3c2 ("idpf: add splitq start_xmit")
Fixes: a5ab9ee0df0b ("idpf: add singleq start_xmit and napi poll")
Cc: [email protected] # 6.7+
Signed-off-by: Michal Kubiak <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add a mechanism to guard against stashing partial packets into the hash
table to make the driver more robust, with more efficient decision
making when cleaning.
Don't stash partial packets. This can happen when an RE (Report Event)
completion is received in flow scheduling mode, or when an out of order
RS (Report Status) completion is received. The first buffer with the skb
is stashed, but some or all of its frags are not because the stack is
out of reserve buffers. This leaves the ring in a weird state since
the frags are still on the ring.
Use the field libeth_sqe::nr_frags to track the number of
fragments/tx_bufs representing the packet. The clean routines check to
make sure there are enough reserve buffers on the stack before stashing
any part of the packet. If there are not, next_to_clean is left pointing
to the first buffer of the packet that failed to be stashed. This leaves
the whole packet on the ring, and the next time around, cleaning will
start from this packet.
An RS completion is still expected for this packet in either case. So
instead of being cleaned from the hash table, it will be cleaned from
the ring directly. This should all still be fine since the DESC_UNUSED
and BUFS_UNUSED will reflect the state of the ring. If we ever fall
below the thresholds, the TxQ will still be stopped, giving the
completion queue time to catch up. This may lead to stopping the queue
more frequently, but it guarantees the Tx ring will always be in a good
state.
Also, always use the idpf_tx_splitq_clean function to clean descriptors,
i.e. use it from clean_buf_ring as well. This way we avoid duplicating
the logic and make sure we're using the same reserve buffers guard rail.
This does require a switch from the s16 next_to_clean overflow
descriptor ring wrap calculation to u16 and the normal ring size check.
Signed-off-by: Joshua Hay <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
&idpf_tx_buffer is almost identical to the previous generations, as well
as the way it's handled. Moreover, relying on dma_unmap_addr() and
!!buf->skb instead of explicit defining of buffer's type was never good.
Use the newly added libeth helpers to do it properly and reduce the
copy-paste around the Tx code.
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Currently, trying to set the bridge mode attribute when numvfs=0 leads to a
crash:
bridge link set dev eth2 hwmode vepa
[ 168.967392] BUG: kernel NULL pointer dereference, address: 0000000000000030
[...]
[ 168.969989] RIP: 0010:mlx5_add_flow_rules+0x1f/0x300 [mlx5_core]
[...]
[ 168.976037] Call Trace:
[ 168.976188] <TASK>
[ 168.978620] _mlx5_eswitch_set_vepa_locked+0x113/0x230 [mlx5_core]
[ 168.979074] mlx5_eswitch_set_vepa+0x7f/0xa0 [mlx5_core]
[ 168.979471] rtnl_bridge_setlink+0xe9/0x1f0
[ 168.979714] rtnetlink_rcv_msg+0x159/0x400
[ 168.980451] netlink_rcv_skb+0x54/0x100
[ 168.980675] netlink_unicast+0x241/0x360
[ 168.980918] netlink_sendmsg+0x1f6/0x430
[ 168.981162] ____sys_sendmsg+0x3bb/0x3f0
[ 168.982155] ___sys_sendmsg+0x88/0xd0
[ 168.985036] __sys_sendmsg+0x59/0xa0
[ 168.985477] do_syscall_64+0x79/0x150
[ 168.987273] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 168.987773] RIP: 0033:0x7f8f7950f917
(esw->fdb_table.legacy.vepa_fdb is null)
The bridge mode is only relevant when there are multiple functions per
port. Therefore, prevent setting and getting this setting when there are no
VFs.
Note that after this change, there are no settings to change on the PF
interface using `bridge link` when there are no VFs, so the interface no
longer appears in the `bridge link` output.
Fixes: 4b89251de024 ("net/mlx5: Support ndo bridge_setlink and getlink")
Signed-off-by: Benjamin Poirier <[email protected]>
Reviewed-by: Cosmin Ratiu <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Before creating a scheduling element in a NIC or E-Switch scheduler,
ensure that the requested element type is supported. If the element is
of type Transmit Scheduling Arbiter (TSAR), also verify that the
specific TSAR type is supported.
Fixes: 214baf22870c ("net/mlx5e: Support HTB offload")
Fixes: 85c5f7c9200e ("net/mlx5: E-switch, Create QoS on demand")
Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <[email protected]>
Reviewed-by: Cosmin Ratiu <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Ensure the scheduling element type and TSAR type are explicitly
initialized in the QoS rate group creation.
This prevents potential issues due to default values.
Fixes: 1ae258f8b343 ("net/mlx5: E-switch, Introduce rate limiting groups API")
Signed-off-by: Carolina Jubran <[email protected]>
Reviewed-by: Cosmin Ratiu <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add MLX5E_400GAUI_8_400GBASE_CR8 to the extended modes
in ptys2ext_ethtool_table, since it was missing.
Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes")
Signed-off-by: Shahar Shitrit <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Carolina Jubran <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add MLX5E_1000BASE_T and MLX5E_100BASE_TX to the legacy
modes in ptys2legacy_ethtool_table, since they were missing.
Fixes: 665bc53969d7 ("net/mlx5e: Use new ethtool get/set link ksettings API")
Signed-off-by: Shahar Shitrit <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Carolina Jubran <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add the upcoming ConnectX-9 device ID to the table of supported
PCI device IDs.
Fixes: f908a35b2218 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Maher Sanalla <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
If REGMAP_SPI is m and IEEE802154_MCR20A is y,
mcr20a.c:(.text+0x3ed6c5b): undefined reference to `__devm_regmap_init_spi'
ld: mcr20a.c:(.text+0x3ed6cb5): undefined reference to `__devm_regmap_init_spi'
Select REGMAP_SPI for IEEE802154_MCR20A to fix it.
Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver")
Signed-off-by: Jinjie Ruan <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Stefan Schmidt <[email protected]>
|
|
Enabling HWS support in the mlx5 driver:
- added HWS API header
- added HWS files in the mlx5 driver makefile
- added kconfig flag that enables HWS compilation
Reviewed-by: Erez Shitrit <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Added implementation of send engine and handling of HWS context.
Reviewed-by: Itamar Gozlan <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Added debug dump of the existing HWS state,
and all the required internal definitions.
To dump the HWS state, cat the following debugfs node:
cat /sys/kernel/debug/mlx5/<PCI>/steering/fdb/ctx_<ctx_id>
Reviewed-by: Hamdan Agbariya <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Added implementation of backward-compatible (BWC) steering API.
Native HWS API is very different from SWS API:
- SWS is synchronous (rule creation/deletion API call returns when
the rule is created/deleted), while HWS is asynchronous (it
requires polling for completion in order to know when the rule
creation/deletion happened)
- SWS manages its own memory (it allocates/frees all the needed
memory for steering rules, while HWS requires the rules memory
to be allocated/freed outside the API
In order to make HWS fit the existing fs-core steering API paradigm,
this patch adds implementation of backward-compatible (BWC) steering
API that has the bahaviour similar to SWS: among others, it encompasses
all the rules' memory management and completion polling, presenting
the usual synchronous API for the upper layer.
A user that wishes to utilize the full speed potential of HWS can
call the HWS async API and have rule insertion/deletion batching,
lower memory management overhead, and lower CPU utilization.
Such approach will be taken by the future Connection Tracking.
Note that BWC steering doesn't support yet rules that require more
than one match STE - complex rules.
This support will be added later on.
Reviewed-by: Erez Shitrit <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Added object pools and buddy allocator functionality.
Reviewed-by: Itamar Gozlan <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Vport is a virtual eswitch port that is associated with its virtual
function (VF), physical function (PF) or sub-function (SF).
This patch adds handling of vports in HWS.
Reviewed-by: Hamdan Agbariya <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Packet headers/metadta manipulations are split into two parts:
- Header Modify Pattern: an object that describes which fields
will be modified and in which way
- Header Modify Argument: an object that provides the values
to be used for header modification
Reviewed-by: Hamdan Agbariya <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
This patch adds implementation of FW object handling, such
as creation/destruction, modification, and querying.
Reviewed-by: Hamdan Agbariya <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Matcher object encompasses all the building blocks that are
needed in order to perform flow steering of a given flow:
- flow table that serves as entering point of this matcher
- Rule Table Context (RTC) objects to hold ll the Steering
Table Entries (STEs), both for matching the flow and for
performing actions
- rules that describe the set of matching parameters for a
flow and actions to perform in case of a hit.
This patch adds implementation of matchers handling in HWS.
Reviewed-by: Itamar Gozlan <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The Match Definer combines packet fields and a mask,
creating a key which can be used for packet matching
during steering flow processing.
This patch adds handling of definer objects in HWS.
Reviewed-by: Hamdan Agbariya <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Steering rule is a concept that includes match parameters for a flow,
and actions to perform on the flows that match these parameters.
This patch adds rules handling part of HW Steering.
Reviewed-by: Itamar Gozlan <[email protected]>
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|