| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In EMLSR we need to track the RSSI of both links, and exit if the RSSI of
one of the links got too low.
For that request the FW to send statistics every 5 seconds when in EMLSR.
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240416134215.6e19d596d77f.Ica2a75a031b1bced0dc2e18c5d365b5eb0d3ec07@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
mac80211 invokes the driver callback drv_can_activate_links() from
ieee80211_set_active_links to verify it can activate the desired link
combination.
However, ieee80211_set_active_links is called with more than one link in
2 cases:
- After driver's link selection decided to enter EMLSR
- From debugfs, for testing purposes.
For both cases there is no need to recompute all the considerations
determining whether to activate EMLSR.
Instead, only check if the vif is not blocked for EMLSR.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Link: https://msgid.link/20240416134215.202cf5a9ef2c.I65e4698b730a8652ad8d1c01420aabb41a1d04fd@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Address scenarios where repeated entry and exit from EMLSR occur, such as
encountering missed beacons on a specific link,
while still discovering that link during a scan.
To mitigate this, introduce the EMLSR prevention mechanism, which operates
as follows:
- On each exit from EMLSR event, record the timestamp and the exit
reason.
- If two consecutive exits happen for the same reason within a
400-second window, enforce a 300-second EMLSR prevention.
- If a third exit for the same reason occurs within 400 seconds from the
second exit, enforce an extended EMLSR prevention of 600 seconds.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Link: https://msgid.link/20240416134215.d820ee98b300.I6406db40cf25eabdba602afd783466473b909216@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
In case of more than 6 missed beacons on one of the links,
exit EMLSR by deactivating that link.
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240416134215.f9111c79cb53.Ie95ea60149a9bc4367f6b338b37c8635051351ba@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
It's dangerous to re-initialize works repeatedly, especially
delayed ones that have an associated timer, and even more so
if they're not necessarily canceled inbetween. This can be
the case for these workers here during FW restart scenarios,
so make sure to initialize it only once.
While at it, also ensure it is cancelled correctly.
Fixes: f67806140220 ("iwlwifi: mvm: disconnect in case of bad channel switch parameters")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240416134215.ddf8eece5eac.I4164f5c9c444b64a9abbaab14c23858713778e35@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
There are reasons for which we need to exit EMLSR, but not to block it
completely, and there are reasons for which we need to block EMLSR.
For both reason types we have the enum iwl_mvm_esr_state, when the
blocking reasons are stored in the `mvmvif::esr_disable_reason` bitmap.
This change introduces the APIs to use in the different cases:
- iwl_mvm_exit_esr - will exit from EMLSR mode.
- iwl_mvm_block_esr - will update the bitmap and exit EMLSR, to
be used for the blocking reasons only.
- iwl_mvm_unblock_esr - will update the bitmap. To be used for the
blocking reasons only.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Link: https://msgid.link/20240416134215.d54142a75876.I552926065521f5f848c37b0bd845494bd7865fb7@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Replaces the current logic with a new algorithm based on the link
grading introduced in a previous patch.
The new selection algorithm will be invoked upon successful scan to ensure
it has the necessary updated data it needs.
This update delegates the selection logic as the primary link
determiner in EMLSR mode, storing it in mvmvif to avoid repeated
calculations, as the result may vary.
Additionally, includes tests for iwl_mvm_valid_link_pair to validate
link pairs for EMLSR.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The functions that are link related, so they should be in link.c and
not in mld-mac80211.c. Move them.
Also move the different prototypes to the right place in mvm.h
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Link: https://msgid.link/20240416134215.e7c368256fa0.I6b15805a7c8a75d1814f1a829601daf4d3788731@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Currenty iwl_mvm_mld_select_links() doesn't fully check that
EMLSR is allowed before selecting the 2 best links.
Although it will fail in ieee80211_set_active_links(), it is preferred
to avoid the redundent calculations.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Link: https://msgid.link/20240416134215.3578a93feb1a.I1cd91608bb73fbe19b8dfdf90e14ce40b98c3430@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
2.4 GHz/LB (low band) link can't be used in an EMLSR links pair when
BT is on. But EMLSR is still allowed for a pair of links which none of
them operates in LB.
In the existing code, EMLSR will always be disabled if one of the
usable links is in LB (and BT is on).
Move this check to the code that verifies a specific pair of links,
and only if one of these links operates on LB - disable EMLSR.
Fixes: 10159a45666b ("wifi: iwlwifi: disable eSR when BT is active")
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240416134215.2841006b5cc4.I45ffd583f593daa950322852ceb9454cbf497e24@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The function iwl_mvm_can_enter_esr() is (among others) calculating
if EMLSR mode is disabled due to BT coex by calling
iwl_mvm_bt_coex_calculate_esr_mode(), then stores the decision in
mvmvif::esr_disable_reason.
But there is no need to calculate this every time iwl_mvm_can_enter_esr
is called. Fix this by calculating it once after authorization,
and in iwl_mvm_can_enter_esr only check mvmvif::esr_disable_reason.
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240416134215.a767e243366e.I3b32d36cda23f67dc103a28a9bdccb0039d22574@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
For selecting what link(s) out of the usable ones
to activate, calculate a grade for a given link.
Calculation of a link grade is done as follows:
1. get the estimated throughput according to the RSSI of the link, this
will be the base grade
2. get the channel load from the BSS Load Element, subtracting the load
caused by us. Apply the factor on the grade.
3. puncturing factor: calculate the percentage of the punctured
subchannels (out of the total subchannels). Apply this on the grade.
The link grading will be used by the link selection mechanism in a later
patch.
Also add KUnit tests for it.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Link: https://msgid.link/20240416134215.a6799dbd5643.If137ca6dc443606c7d8c99ec1fc38b325003a7c1@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Send AP_TX_POWER_CONSTRAINTS_CMD with no local maximum transmit
power constraint to FW and FW will update the TPE element with
required tx power limits.
Signed-off-by: Mukesh Sisodiya <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240416134215.b6af4ecfcfe8.I07e8db349190e0c58c468c18477d8551288ac069@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This will maintain a bitmap of reasons for which we want to avoid
enabling EMLSR.
For now, we have a single reason: BT coexistence, but we will add soon
more reasons. Make it a bitmap to make it easier to manage.
Since we'll impact the parameters that impact the enablement /
disablement of EMLSR from several places, introduce a generic function
that takes into account the current state and execute the decision that
must be taken.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240416134215.94c3590c6f27.I6a190da5025d0523ef483ffac0c64e26675041e6@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add support for enable/disable 320 MHz for Japan and South Korea
by reading WBEM (WiFi Bandwidth Enablement per MCC) variable from
UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240415114847.7946c3befbe1.I453c33f7ea48156ea2a3961f50a9003103fca5a5@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add support for enablement of PPAG for
- VLP for 6 GHz mode in CANADA, USA and ETSI countries.
- LPI for 6 GHz mode in CANADA.
- SP for 6 GHz mode in CANADA, USA and ETSI countries.
Signed-off-by: Anjaneyulu <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240415114847.e1893fe24ea3.Ic84cf576de0883c2184c939bdfad4b110a8a1815@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
moved lari_config handling to common place to avoid code duplication.
Signed-off-by: Anjaneyulu <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240415114847.02bfcd27b333.If149c3038bdfe57e254b26857209e8c7ab709779@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240415114847.c387957560ea.I9229336936faa0ed346af469e9c77c7d6e5a2541@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
regulatory header file should not be included in API file,
as API defination should be independent.
Signed-off-by: Anjaneyulu <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240415114847.61c9163859a7.Id29a86566ff313ab8e85aa1007f841e95a67d6b7@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The same applies for newer devices (currently SC), so just
change the condition here.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240415114847.db62bba6b2fa.Ie7fdc75c0b8759574a8744f0a316065cb791dd82@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This function is useful in other places, so move it in order to share
it.
Signed-off-by: Benjamin Berg <[email protected]>
Reviewed-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240415114847.8e456d6c599e.Ibaa76864b30c990bfc35d886ec1344d513a96d14@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Instead of setting the UID to type mapping while building the
scan command, set the UID to type mapping only after the scan
request command was sent successfully.
This resolves a bug where in case a scan request command fails
and a recovery flow is initiated, the recovery flow would indicate
to mac80211 that scan is completed though it was not really started.
Signed-off-by: Ilan Peer <[email protected]>
Reviewed-by: Ayala Beker <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240415114847.7011e93363a2.Idb9b401414864dfc5540d8798a6cb2b192a2acc2@changeid
[also remove from iwl_mvm_scan_umac_v14_and_above()]
Signed-off-by: Johannes Berg <[email protected]>
|
|
If we don't get all the values here, we might pass them to
cfg80211 uninitialized. Fix that, even if the input might
then not make much sense.
Fixes: 2af3b2a631b1 ("mac80211_hwsim: add PMSR report support via virtio")
Reviewed-by: Miriam Rachel Korenblit <[email protected]>
Link: https://msgid.link/20240418105220.e1317621c1f9.If7dd447de24d7493d133284db5e9e482e4e299f8@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Revert the API version bump, the kernel doesn't actually have
all the code to deal with that version yet.
Fixes: 653a90f6b226 ("wifi: iwlwifi: bump FW API to 90 for BZ/SC devices")
Link: https://msgid.link/20240419085147.cd756fadab03.Ibccbb65be8e05b516cae1b9fb27a959662f9f51a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Don't subtract 1 from the power index. This was added in commit
2fc0b8e5a17d ("rtl8xxxu: Add TX power base values for gen1 parts")
for unknown reasons. The vendor drivers don't do this.
Also correct the calculations of values written to
REG_OFDM0_X{C,D}_TX_IQ_IMBALANCE. According to the vendor driver,
these are used for TX power training.
With these changes rtl8xxxu sets the TX power of RTL8192CU the same
as the vendor driver.
None of this appears to have any effect on my RTL8192CU device.
Cc: [email protected]
Signed-off-by: Bitterblue Smith <[email protected]>
Reviewed-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://msgid.link/[email protected]
|
|
The qpl_cfg struct was used to make sure that no two different queues
are using QPL with the same qpl_id. We can remove that qpl_cfg struct
since now the qpl_ids map with the queues respectively as follows:
For tx queues: qpl_id = tx_qid
For rx queues: qpl_id = max_tx_queues + rx_qid
And when XDP is used, it will need the user to reduce the tx queues to
be at most half of the max_tx_queues. Then it will use the same number
of tx queues starting from the end of existing tx queues for XDP. So the
XDP queues will not exceed the max_tx_queues range and will not overlap
with the rx queues, where the qpl_ids will not have overlapping too.
Considering of that, we remove the qpl_cfg struct to get the qpl_id
directly based on the queue id. Unless we are erroneously allocating a
rx/tx queue that has already been allocated, we would never allocate
the qpl with the same qpl_id twice. In that case, it should fail much
earlier than the QPL assignment.
Suggested-by: Praveen Kaligineedi <[email protected]>
Signed-off-by: Ziwei Xiao <[email protected]>
Reviewed-by: Harshitha Ramamurthy <[email protected]>
Reviewed-by: Shailend Chand <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a new driver for the TI TPS23881 I2C Power Sourcing Equipment
controller.
Signed-off-by: Kory Maincent <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a new driver for the PD692x0 I2C Power Sourcing Equipment controller.
This driver only support i2c communication for now.
Signed-off-by: Kory Maincent <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Integrate the regulator framework to the PSE framework for enhanced
access to features such as voltage, power measurement, and limits, which
are akin to regulators. Additionally, PSE features like port priorities
could potentially enhance the regulator framework. Note that this
integration introduces some implementation complexity, including wrapper
callbacks, but the potential benefits make it worthwhile.
Regulator are using enable counter with specific behavior.
Two calls to regulator_disable will trigger kernel warnings.
If the counter exceeds one, regulator_disable call won't disable the
PSE PI. These behavior isn't suitable for PSE control.
Added a boolean 'enabled' state to prevent multiple calls to
regulator_enable/disable. These calls will only be called from PSE
framework as it won't have any regulator children, therefore no mutex are
needed to safeguards this boolean.
regulator_get needs the consumer device pointer. Use PSE as regulator
provider and consumer device until we have RJ45 ports represented in
the Kernel.
Signed-off-by: Kory Maincent <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Implement setup_pi_matrix callback to configure the PSE PI matrix. This
functionality is invoked before registering the PSE and following the core
parsing of the pse_pis devicetree subnode.
Signed-off-by: Kory Maincent <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The Power Sourcing Equipment Power Interface (PSE PI) plays a pivotal role
in the architecture of Power over Ethernet (PoE) systems. It is essentially
a blueprint that outlines how one or multiple power sources are connected
to the eight-pin modular jack, commonly known as the Ethernet RJ45 port.
This connection scheme is crucial for enabling the delivery of power
alongside data over Ethernet cables.
This patch adds support for getting the PSE controller node through PSE PI
device subnode.
This supports adds a way to get the PSE PI id from the pse_pi devicetree
subnode of a PSE controller node simply by reading the reg property.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Introduce an enumeration to define PSE types (C33 or PoDL),
utilizing a bitfield for potential future support of both types.
Include 'pse_get_types' helper for external access to PSE type info.
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-17 (ice)
This series contains updates to ice driver only.
Marcin adds Tx malicious driver detection (MDD) events to be included as
part of mdd-auto-reset-vf.
Dariusz removes unnecessary implementation of ndo_get_phys_port_name.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Remove ndo_get_phys_port_name
ice: Add automatic VF reset on Tx MDD events
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_match_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_match_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Change the check for unsupported control flags, to use the new helper
flow_rule_is_supp_control_flags().
Since the helper was based on sfc, then nothing really changes.
Compile-tested, and compiled objects are identical.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Reviewed-by: Edward Cree <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Tested-by: Petr Machata <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/trace/events/rpcgss.h
386f4a737964 ("trace: events: cleanup deprecated strncpy uses")
a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field")
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_tc_lib.c
2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device")
784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
|
|
The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Reported-by: Schuyler Patton <[email protected]>
Signed-off-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.
In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.
Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.
cc: [email protected] # 6.6+
Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Jarkko Palviainen <[email protected]>
Signed-off-by: Jose Ignacio Tornos Martinez <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, when debug logs are enabled, messages such as the following
are found in the kernel log:
event mgmt rx skb pK-error len 209 ftype 00 stype 50
The "pK-error" comes from using %pK to display an skb address in an
interrupt context.
Per the guidance in the current "printk-formats" documentation, %pK
"is only intended when producing content of a file read by userspace
from e.g. procfs or sysfs, not for dmesg."
So replace %pK with %p in all of the ath12k_dbg() format strings.
Signed-off-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
The survey dump statistics does not display channel RX and TX time
properly because the survey flag is not enabled in the firmware service
flag.
If firmware supports enable the service flag "bss_chan_info" in
wmi_resource_config to fetch and print the stats for specific pdev.
Enabling WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 does not have any impact
on WCN7850 since this bit is not utilized by the WCN7850 firmware.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Thiraviyam Mariyappan <[email protected]>
Signed-off-by: Karthikeyan Kathirvel <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
ath12k will support Multi-Link Operation (MLO) in the future but not yet. A
major change with MLO is that cfg80211 will disable Wireless Extension (WEXT)
user space interface. To avoid having inconsistent user experience, first
supporting WEXT and later not, disable WEXT already now.
Now ath12k claims that WEXT is not supported:
$ iwconfig wlan0
wlan0 no wireless extensions.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kalle Valo <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Link: https://msgid.link/[email protected]
|
|
if (noa_descriptors > WMI_P2P_MAX_NOA_DESCRIPTORS), there is a mix of
return and goto. In such a case, 'td' should be freed to avoid a memory
leak.
While at it, change ath11k_wmi_p2p_noa_event() to return void.
'0' was returned in all cases, even in case of error and the only caller
does not handle the return value.
This is also more consistent with most of functions called from
ath11k_wmi_tlv_op_rx().
Fixes: 2408379f15a1 ("wifi: ath11k: implement handling of P2P NoA event")
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/07f1fc75b2d5b4173ae1b7bb1da5be7f6fc608c8.1713212781.git.christophe.jaillet@wanadoo.fr
|
|
The common DT property can be used to limit the available
channels/frequencies. But ath11k has to manually call
wiphy_read_of_freq_limits().
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/ed266944c721de8dbf0fe35f387a3a71b2c84037.1686486468.git.chunkeey@gmail.com
|
|
The RSS hash report is a feature that's part of the virtio specification.
Currently, virtio backends like qemu, vdpa (mlx5), and potentially vhost
(still a work in progress as per [1]) support this feature. While the
capability to obtain the RSS hash has been enabled in the normal path,
it's currently missing in the XDP path. Therefore, we are introducing
XDP hints through kfuncs to allow XDP programs to access the RSS hash.
1.
https://lore.kernel.org/all/[email protected]/#r
Signed-off-by: Liang Chen <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Reviewed-by: Heng Qi <[email protected]>
Acked-by: Jason Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Establish the rule that header files are always included in sorted
(POSIX local) order. Standard and private headers are separated by
a blank line.
Similarly, sort all forward-declarations for structures.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
All of the config data files and all of the register definition
files (plus a few others) use GSI_EE_AP, which is defined in
"ipa_version.h". Include that header where it's needed.
All of the IPA register definition files include "../ipa.h", though
none of them need anything defined there. Similarly, all of the GSI
register definition files include "../gsi.h", but don't need anything
defined there. Remove these unnneded includes.
All of the configuration data files include "../gsi.h", though none
of them need anything defined there, so remove these includes.
Remove other includes of local header files that are not required.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|