| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a possibility to mark all transmitted/received timestamps as invalid
by clearing PHY OFFSET_READY registers.
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-4-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Introduce functions enabling/disabling Tx TS interrupts
for the E822 and ETH56G PHYs
Signed-off-by: Sergey Temerkhanov <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-3-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Multiple places in the driver code need to convert enum ice_ptp_tmr_cmd
values into register bits for both the main timer and the PHY port
timers. The main MAC register has one bit scheme for timer commands,
while the PHY commands use a different scheme.
The E810 and E830 devices use the same scheme for port commands as used
for the main timer. However, E822 and ETH56G hardware has a separate
scheme used by the PHY.
Introduce helper functions to convert the timer command enumeration into
the register values, reducing some code duplication, and making it
easier to later refactor the individual port write commands.
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-2-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Create new ice_ptp_hw struct and use it for all HW and PTP-related
fields from struct ice_hw.
Replace definitions with struct fields, which values are set accordingly
to a specific device.
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-1-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use void __iomem pointers as parameters for mcf_insw() and mcf_outsw()
to align with the parameter types of readw() and writew() to fix the
following warnings reported by kernel test robot:
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: expected void *a
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: got void [noderef] __iomem *
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: expected void *a
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: got void [noderef] __iomem *
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: expected void *a
drivers/net/ethernet/smsc/smc91x.c:590:9: sparse: got void [noderef] __iomem *
drivers/net/ethernet/smsc/smc91x.c:483:17: sparse: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/smsc/smc91x.c:483:17: sparse: expected void *a
drivers/net/ethernet/smsc/smc91x.c:483:17: sparse: got void [noderef] __iomem *
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Acked-by: Nicolas Pitre <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Thorsten Blum <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the following snippet is run, lockdep will report a deadlock[1].
/* Acquire all queues dim_locks */
for (i = 0; i < vi->max_queue_pairs; i++)
mutex_lock(&vi->rq[i].dim_lock);
There's no deadlock here because the vq locks are always taken
in the same order, but lockdep can not figure it out. So refactoring
the code to alleviate the problem.
[1]
========================================================
WARNING: possible recursive locking detected
6.9.0-rc7+ #319 Not tainted
--------------------------------------------
ethtool/962 is trying to acquire lock:
but task is already holding lock:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&vi->rq[i].dim_lock);
lock(&vi->rq[i].dim_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by ethtool/962:
#0: ffffffff82dbaab0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x19/0x40
#1: ffffffff82dad0a8 (rtnl_mutex){+.+.}-{3:3}, at:
ethnl_default_set_doit+0xbe/0x1e0
stack backtrace:
CPU: 6 PID: 962 Comm: ethtool Not tainted 6.9.0-rc7+ #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xb0
check_deadlock+0x130/0x220
__lock_acquire+0x861/0x990
lock_acquire.part.0+0x72/0x1d0
? lock_acquire+0xf8/0x130
__mutex_lock+0x71/0xd50
virtnet_set_coalesce+0x151/0x190
__ethnl_set_coalesce.isra.0+0x3f8/0x4d0
ethnl_set_coalesce+0x34/0x90
ethnl_default_set_doit+0xdd/0x1e0
genl_family_rcv_msg_doit+0xdc/0x130
genl_family_rcv_msg+0x154/0x230
? __pfx_ethnl_default_set_doit+0x10/0x10
genl_rcv_msg+0x4b/0xa0
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x1af/0x280
netlink_sendmsg+0x20e/0x460
__sys_sendto+0x1fe/0x210
? find_held_lock+0x2b/0x80
? do_user_addr_fault+0x3a2/0x8a0
? __lock_release+0x5e/0x160
? do_user_addr_fault+0x3a2/0x8a0
? lock_release+0x72/0x140
? do_user_addr_fault+0x3a7/0x8a0
__x64_sys_sendto+0x29/0x30
do_syscall_64+0x78/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 4d4ac2ececd3 ("virtio_net: Add a lock for per queue RX coalesce")
Signed-off-by: Heng Qi <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the dim worker is scheduled, if it no longer needs to issue
commands, dim may not be able to return to the working state later.
For example, the following single queue scenario:
1. The dim worker of rxq0 is scheduled, and the dim status is
changed to DIM_APPLY_NEW_PROFILE;
2. dim is disabled or parameters have not been modified;
3. virtnet_rx_dim_work exits directly;
Then, even if net_dim is invoked again, it cannot work because the
state is not restored to DIM_START_MEASURE.
Fixes: 6208799553a8 ("virtio-net: support rx netdim")
Signed-off-by: Heng Qi <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Refactored the handling of control_buf to be within the cvq_lock
critical section, mitigating race conditions between reading device
responses and new command submissions.
Fixes: 6f45ab3e0409 ("virtio_net: Add a lock for the command VQ.")
Signed-off-by: Heng Qi <[email protected]>
Reviewed-by: Hariprasad Kelam <[email protected]>
Acked-by: Jason Wang <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since commit 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx
drivers") ieee80211_hw_config() is no longer called with changed = ~0.
rtlwifi relied on ~0 in order to ignore the default retry limits of
4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS.
RTL8192DU has a lot of packet loss with the default limits from
mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS
completely, because it's the simplest solution.
Link: https://lore.kernel.org/linux-wireless/[email protected]/
Cc: [email protected] # 6.9.x
Signed-off-by: Bitterblue Smith <[email protected]>
Acked-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
'brcmf_pcie_core_info' was added in
commit 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.")
but never used.
'brcms_c_bit_desc' last use was removed in
commit cdf4352f5c59 ("brcmsmac: Improve tx trace and debug support").
Remove them.
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Acked-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). This patch has no effect
on runtime behavior.
At the same time remove some redundant NULL initializations.
Acked-by: Arend van Spriel <[email protected]>
Signed-off-by: Erick Archer <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/AS8PR02MB7237FF1C2E880D1231684D708BF02@AS8PR02MB7237.eurprd02.prod.outlook.com
|
|
Here's another one I missed during the initial conversion,
fix that.
Cc: [email protected]
Reported-by: Rene Petersen <[email protected]>
Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218895
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/20240528142308.3f7db1821e68.I531135d7ad76331a50244d6d5288e14aa9668390@changeid
|
|
Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU")
attempted to convert SRCU to RCU usage, assuming it was not really needed.
The runtime issues that arose after merging it showed that there are code
paths involving sleeping functions, and removing those would need some
heavier driver rework.
Add some documentation about SRCU need to make sure that any future
developer do not miss some use cases if tempted to convert back again to
RCU.
Signed-off-by: Alexis Lothoré <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
This reverts commit 35aee01ff43d7eb6c2caa0b94e7cc6c45baeeab7
Commit 35aee01ff43d ("wifi: wilc1000: set atomic flag on kmemdup in srcu
critical section") was preparatory to the SRCU to RCU conversion done by
commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU").
This conversion brought issues and so has been reverted, so the atomic flag
is not needed anymore.
Signed-off-by: Alexis Lothoré <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
This reverts commit f236464f1db7bea80075e6e31ac70dc6eb80547f
Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU")
replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No
documentation or commit history hinted about why SRCU has been preferred
in original design, so it has been assumed to be safe to do this
conversion.
Unfortunately, some static analyzers raised warnings, confirmed by runtime
checker, not long after the merge. At least three different issues arose
when switching to RCU:
- wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical
section yet calls wait_for_completion_timeout
- wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while
manipulating a vif retrieved from vif list
- set_channel sends command to chip (and so, also waits for a completion)
while holding a vif retrieved from vif list (so, in RCU read critical
section)
Some of those issues are not trivial to fix and would need bigger driver
rework. Fix those issues by reverting the SRCU to RCU conversion commit
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/linux-wireless/[email protected]/
Fixes: f236464f1db7 ("wifi: wilc1000: convert list management to RCU")
Signed-off-by: Alexis Lothoré <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/[email protected]/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
With the new default_an_inband functionality in phylink, there is no
need to check for a fixed link when this flag is set, since a fixed
link will now override default_an_inband.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Rename xpcs_an_inband to default_an_inband to reflect the change in
phylink and its changed functionality.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since default_an_inband can be overriden by a fixed-link specification,
there is no need for memac to be checking for this before setting
default_an_inband. Remove this code and update the comment.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since ovr_an_inband no longer overrides every MLO_AN_xxx mode, rename
it to reflect what it now does - it changes the default mode from
MLO_AN_PHY to MLO_AN_INBAND. Fix up the two users of this.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Of the two users of phylink_config->ovr_an_inband, both manually check
for a fixed link before setting this flag (or clearing it if they find
a fixed link.) This is unnecessary complication.
Test ovr_an_inband before checking for the fixed-link properties, which
will allow ovr_an_inband to be overriden by a fixed link specification.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Of the two users of phylink_config->ovr_an_inband, both manually check
for a fixed link before setting this flag (or clearing it if they find
a fixed link.) This is unnecessary complication.
Rearrange phylink_parse_mode() a little so we can change how
phylink_config->ovr_an_inband works. This will allow the flag to be
tested before checking for the fixed link properties in the next patch.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are four repititions of the same sequence of code, three of which
are identical. Pull these out into a separate function to improve
readability.
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Include linux/io.h instead of asm/io.h since linux/ includes are
preferred.
Reviewed-by: Andrew Halaney <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It is incorrect to call netif_carrier_off(), or in fact any driver
teardown, before unregister_netdev() has been called.
unregister_netdev() unpublishes the network device from userspace, and
takes the interface down if it was up prior to returning. Therefore,
once the call has returned, we are guaranteed that .ndo_stop() will
have been called for an interface that was up. Phylink will take the
carrier down via phylink_stop(), making any manipulation of the carrier
in the remove path unnecessary.
In the stmmac_release() path, the netif_carrier_off() call follows the
call to phylink_stop(), so this call is redundant.
Reviewed-by: Andrew Halaney <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The pcs_rane() method is not called, so lets just remove this
redundant code.
Reviewed-by: Andrew Halaney <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove useless NULL pointer initialisations for "PCS" methods from the
dwxgmac2 code.
Reviewed-by: Andrew Halaney <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
First of all the flags are never set by any of the driver parts. If nobody
have them set then the respective statements will always have the same
result. Thus the statements can be simplified or even dropped with no risk
to break things.
Secondly shall any of the TBI or RTBI flag is set the MDIO-bus
registration will be bypassed. Why? It really seems weird. It's perfectly
fine to have a TBI/RTBI-capable PHY configured over the MDIO bus
interface.
Based on the notes above the TBI/RTBI PCS flags can be freely dropped thus
simplifying the driver code.
Reviewed-by: Andrew Halaney <[email protected]>
Signed-off-by: Serge Semin <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
A comment in define_trace.h clearly states:
TRACE_INCLUDE_PATH if the path is something other than core kernel
vvvvvvvvvvvvvv
include/trace then this macro can define the path to use. Note, the path
is relative to define_trace.h, not the file including it. Full path names
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
for out of tree modules must be used.
fjes uses path relative to itself. Which (somehow) works most of
the time. Except when the kernel tree is "nested" in another
kernel tree, and ../drivers/net/fjes actually exists. In which
case build will use the header file from the wrong directory.
I've been trying to figure out why net NIPA builder is constantly
failing for the last 5 days, with:
include/trace/../../../drivers/net/fjes/fjes_trace.h:88:17: error: ‘__assign_str’ undeclared (first use in this function)
88 | __assign_str(err, err);
| ^~~~~~~~~~~~
when the line in the tree clearly has only one "err". NIPA does
indeed have "nested" trees, because it uses git work-trees and
the tree on the "outside" is not very up to date.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
All the changes here are whitespace and comments, no code
or definitions changed. Not all issues were addressed, but
it is much better than it was. Mostly fixed was a lot
of "Excess union member" and ''rsvd' not described' warnings.
Signed-off-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We don't want to try to sync more length than might be
in the first frag of an Rx skb, so make sure to use
the frag_len rather than the full len.
Signed-off-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There is no reason not to use netdev_name() in these places, so do just
as the title states.
Signed-off-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Reviewed-by: Kalesh AP <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As the title states, mark unlikely error paths in the data path as
unlikely.
Signed-off-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pass the ionic_txq_desc instead of re-referencing it from the q->txq
array since the caller to ionic_tx_tso_post will always have the
current ionic_txq_desc pointer already.
Signed-off-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Recovery from broken states can be hard. If the LIF reset in
the fw_down path didn't work because the PCI link was broken,
the FW won't be in the right state for proper restart. We can
fire another LIF reset in the fw_up path to be sure things
are clean on restart.
Signed-off-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Address a warning about potential string truncation based on the
string buffer sizes. We can add some hints to the string format
specifier to set limits on the resulting possible string to
squelch the complaints.
Signed-off-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Each object file contains information about which module it gets linked
into, so linking the same file into multiple modules now causes a warning:
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_cmd.o is added to multiple modules: hclge hclgevf
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_rss.o is added to multiple modules: hclge hclgevf
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_tqp_stats.o is added to multiple modules: hclge hclgevf
Change the way that hns3 is built by moving the three common files into a
separate module with exported symbols instead.
Fixes: 5f20be4e90e6 ("net: hns3: refactor hns3 makefile to support hns3_common module")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Each object file contains information about which module it gets linked
into, so linking the same file into multiple modules now causes a warning:
scripts/Makefile.build:254: drivers/net/ethernet/marvell/octeontx2/nic/Makefile: otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf
Change the way that octeontx2 ethernet is built by moving the common
file into a separate module with exported symbols instead.
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Make mlx4 compatible with the newly added netlink queue stats API.
Signed-off-by: Joe Damato <[email protected]>
Tested-by: Martin Karsten <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Make mlx4 compatible with the newly added netlink queue GET APIs.
Signed-off-by: Joe Damato <[email protected]>
Tested-by: Martin Karsten <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
mlx4_en_alloc_frags currently returns -ENOMEM when mlx4_alloc_page
fails but does not increment a stat field when this occurs.
A new field called alloc_fail has been added to struct mlx4_en_rx_ring
which is now incremented in mlx4_en_rx_ring when -ENOMEM occurs.
Signed-off-by: Joe Damato <[email protected]>
Tested-by: Martin Karsten <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently we do reset for each RDDM event from MHI, however there are
cases, see below log, that we get two or more consecutive events, and
it is pointless to do reset for the subsequent ones. What's more, it
makes reset process more likely to fail.
[ 103.289864] mhi mhi0: System error detected
[ 103.289871] ath12k_pci 0000:03:00.0: mhi notify status reason MHI_CB_EE_RDDM
[ 103.293144] mhi mhi0: System error detected
[ 103.293150] ath12k_pci 0000:03:00.0: mhi notify status reason MHI_CB_EE_RDDM
Add a check to avoid reset again and again. This is done by tracking previous
MHI status: if we receive a new RDDM event while the previous event is
also the same, we treat it as duplicate and ignore it, because normally
we should at least receive a MHI_CB_EE_MISSION_MODE event between them.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Currently the resource allocated by crypto_alloc_shash() is not
freed in case ath12k_peer_find() fails, resulting in memory leak.
Add crypto_free_shash() to fix it.
This is found during code review, compile tested only.
Signed-off-by: Baochen Qiang <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Add support for ICSSG switch firmware using existing Dual EMAC driver
with switchdev.
Limitations:
VLAN offloading is limited to 0-256 IDs.
MDB/FDB static entries are limited to 511 entries and different FDBs can
hash to same bucket and thus may not completely offloaded
Example assuming ETH1 and ETH2 as ICSSG2 interfaces:
Switch to ICSSG Switch mode:
ip link add name br0 type bridge
ip link set dev eth1 master br0
ip link set dev eth2 master br0
ip link set dev br0 up
bridge vlan add dev br0 vid 1 pvid untagged self
Going back to Dual EMAC mode:
ip link set dev br0 down
ip link set dev eth1 nomaster
ip link set dev eth2 nomaster
ip link del name br0 type bridge
By default, Dual EMAC firmware is loaded, and can be changed to switch
mode by above steps
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: MD Danish Anwar <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
ICSSG can operating in switch mode with 2 ext port and 1 host port with
VLAN/FDB/MDB and STP offloading. Add switchdev based driver to
support the same.
Driver itself will be integrated with icssg_prueth in future commits
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: MD Danish Anwar <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Introduce helper functions to configure firmware FDB tables, VLAN tables
and Port VLAN ID settings to aid adding Switch mode support.
Signed-off-by: MD Danish Anwar <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Raw packet from PF_PACKET socket ontop of an IPv6-backed ipvlan device will
hit WARN_ON_ONCE() in sk_mc_loop() through sch_direct_xmit() path.
WARNING: CPU: 2 PID: 0 at net/core/sock.c:775 sk_mc_loop+0x2d/0x70
Modules linked in: sch_netem ipvlan rfkill cirrus drm_shmem_helper sg drm_kms_helper
CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Not tainted 6.9.0+ #279
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:sk_mc_loop+0x2d/0x70
Code: fa 0f 1f 44 00 00 65 0f b7 15 f7 96 a3 4f 31 c0 66 85 d2 75 26 48 85 ff 74 1c
RSP: 0018:ffffa9584015cd78 EFLAGS: 00010212
RAX: 0000000000000011 RBX: ffff91e585793e00 RCX: 0000000002c6a001
RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff91e589c0f000
RBP: ffff91e5855bd100 R08: 0000000000000000 R09: 3d00545216f43d00
R10: ffff91e584fdcc50 R11: 00000060dd8616f4 R12: ffff91e58132d000
R13: ffff91e584fdcc68 R14: ffff91e5869ce800 R15: ffff91e589c0f000
FS: 0000000000000000(0000) GS:ffff91e898100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f788f7c44c0 CR3: 0000000008e1a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? __warn (kernel/panic.c:693)
? sk_mc_loop (net/core/sock.c:760)
? report_bug (lib/bug.c:201 lib/bug.c:219)
? handle_bug (arch/x86/kernel/traps.c:239)
? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621)
? sk_mc_loop (net/core/sock.c:760)
ip6_finish_output2 (net/ipv6/ip6_output.c:83 (discriminator 1))
? nf_hook_slow (net/netfilter/core.c:626)
ip6_finish_output (net/ipv6/ip6_output.c:222)
? __pfx_ip6_finish_output (net/ipv6/ip6_output.c:215)
ipvlan_xmit_mode_l3 (drivers/net/ipvlan/ipvlan_core.c:602) ipvlan
ipvlan_start_xmit (drivers/net/ipvlan/ipvlan_main.c:226) ipvlan
dev_hard_start_xmit (net/core/dev.c:3594)
sch_direct_xmit (net/sched/sch_generic.c:343)
__qdisc_run (net/sched/sch_generic.c:416)
net_tx_action (net/core/dev.c:5286)
handle_softirqs (kernel/softirq.c:555)
__irq_exit_rcu (kernel/softirq.c:589)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1043)
The warning triggers as this:
packet_sendmsg
packet_snd //skb->sk is packet sk
__dev_queue_xmit
__dev_xmit_skb //q->enqueue is not NULL
__qdisc_run
sch_direct_xmit
dev_hard_start_xmit
ipvlan_start_xmit
ipvlan_xmit_mode_l3 //l3 mode
ipvlan_process_outbound //vepa flag
ipvlan_process_v6_outbound
ip6_local_out
__ip6_finish_output
ip6_finish_output2 //multicast packet
sk_mc_loop //sk->sk_family is AF_PACKET
Call ip{6}_local_out() with NULL sk in ipvlan as other tunnels to fix this.
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Handle error code to cause failed to USB probe result from unexpected
USB EP number, otherwise when USB disconnect skb_dequeue() an uninitialized
skb list and cause warnings below.
usb 2-1: USB disconnect, device number 76
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 54060 Comm: kworker/0:1 Not tainted 6.9.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:114
assign_lock_key kernel/locking/lockdep.c:976 [inline]
register_lock_class+0xc18/0xfa0 kernel/locking/lockdep.c:1289
__lock_acquire+0x108/0x3bc0 kernel/locking/lockdep.c:5014
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b0/0x550 kernel/locking/lockdep.c:5719
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
skb_dequeue+0x20/0x180 net/core/skbuff.c:3846
rtl_usb_cleanup drivers/net/wireless/realtek/rtlwifi/usb.c:706 [inline]
rtl_usb_deinit drivers/net/wireless/realtek/rtlwifi/usb.c:721 [inline]
rtl_usb_disconnect+0x4a4/0x850 drivers/net/wireless/realtek/rtlwifi/usb.c:1051
usb_unbind_interface+0x1e8/0x980 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:568 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:560
__device_release_driver drivers/base/dd.c:1270 [inline]
device_release_driver_internal+0x443/0x620 drivers/base/dd.c:1293
bus_remove_device+0x22f/0x420 drivers/base/bus.c:574
device_del+0x395/0x9f0 drivers/base/core.c:3909
usb_disable_device+0x360/0x7b0 drivers/usb/core/message.c:1418
usb_disconnect+0x2db/0x930 drivers/usb/core/hub.c:2305
hub_port_connect drivers/usb/core/hub.c:5362 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5662 [inline]
port_event drivers/usb/core/hub.c:5822 [inline]
hub_event+0x1e39/0x4ce0 drivers/usb/core/hub.c:5904
process_one_work+0x97b/0x1a90 kernel/workqueue.c:3267
process_scheduled_works kernel/workqueue.c:3348 [inline]
worker_thread+0x680/0xf00 kernel/workqueue.c:3429
kthread+0x2c7/0x3b0 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: Shichao Lai <[email protected]>
Closes: https://lore.kernel.org/linux-wireless/CAEk6kZuuezkH1dVRJf3EAVZK-83=OpTz62qCugkpTkswj8JF6w@mail.gmail.com/T/#u
Tested-by: Shichao Lai <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://msgid.link/[email protected]
|
|
The RTL8192DU is an older Wifi 4 dual band chip. It comes in two
flavours: single MAC single PHY (like most Realtek Wifi 4 USB devices),
and dual MAC dual PHY.
The single MAC single PHY version is 2T2R and can work either in the
2.4 GHz band or the 5 GHz band.
The dual MAC dual PHY version has two USB interfaces and appears to the
system as two separate 1T1R Wifi devices, one working in the 2.4 GHz
band, the other in the 5 GHz band.
This was tested only with a single MAC single PHY device, mostly in
station mode. The speeds in the 2.4 GHz band with 20 MHz channel width
are similar to the out-of-tree driver: 85/51 megabits/second.
Stefan Lippers-Hollmann tested the speed in the 5 GHz band with 40 MHz
channel width: 173/99 megabits/second.
It was also tested briefly in AP mode. It's emitting beacons and my
phone can connect to it.
Signed-off-by: Bitterblue Smith <[email protected]>
Tested-by: Stefan Lippers-Hollmann <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://msgid.link/[email protected]
|