aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2024-10-19net: plip: fix break; causing plip to never transmitJakub Boehm1-1/+1
Since commit 71ae2cb30531 ("net: plip: Fix fall-through warnings for Clang") plip was not able to send any packets, this patch replaces one unintended break; with fallthrough; which was originally missed by commit 9525d69a3667 ("net: plip: mark expected switch fall-throughs"). I have verified with a real hardware PLIP connection that everything works once again after applying this patch. Fixes: 71ae2cb30531 ("net: plip: Fix fall-through warnings for Clang") Signed-off-by: Jakub Boehm <[email protected]> Reviewed-by: Simon Horman <[email protected]> Message-ID: <[email protected]> Signed-off-by: Andrew Lunn <[email protected]>
2024-10-19be2net: fix potential memory leak in be_xmit()Wang Hai1-5/+5
The be_xmit() returns NETDEV_TX_OK without freeing skb in case of be_xmit_enqueue() fails, add dev_kfree_skb_any() to fix it. Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.") Signed-off-by: Wang Hai <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Kalesh AP <[email protected]> Message-ID: <[email protected]> Signed-off-by: Andrew Lunn <[email protected]>
2024-10-19net/sun3_82586: fix potential memory leak in sun3_82586_send_packet()Wang Hai1-0/+1
The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai <[email protected]> Reviewed-by: Simon Horman <[email protected]> Message-ID: <[email protected]> Signed-off-by: Andrew Lunn <[email protected]>
2024-10-19net: pse-pd: Fix out of bound for loopKory Maincent1-2/+2
Adjust the loop limit to prevent out-of-bounds access when iterating over PI structures. The loop should not reach the index pcdev->nr_lines since we allocate exactly pcdev->nr_lines number of PI structures. This fix ensures proper bounds are maintained during iterations. Fixes: 9be9567a7c59 ("net: pse-pd: Add support for PSE PIs") Signed-off-by: Kory Maincent <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Oleksij Rempel <[email protected]> Message-ID: <[email protected]> Signed-off-by: Andrew Lunn <[email protected]>
2024-10-17Merge tag 'ath-current-20241016' of ↵Kalle Valo3-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patches for v6.12-rc4 Fix two instances of memory leaks, one in ath10k and one in ath11k.
2024-10-17wifi: rtlwifi: rtl8192du: Don't claim USB ID 0bda:8171Bitterblue Smith1-1/+0
This ID appears to be RTL8188SU, not RTL8192DU. This is the wrong driver for RTL8188SU. The r8712u driver from staging handles this ID. I think this ID comes from the original rtl8192du driver from Realtek. I don't know if they added it by mistake, or it was actually used for two different chips. RTL8188SU with this ID exists in the wild. RTL8192DU with this ID probably doesn't. Fixes: b5dc8873b6ff ("wifi: rtlwifi: Add rtl8192du/sw.c") Cc: [email protected] # v6.11 Closes: https://github.com/lwfinger/rtl8192du/issues/105 Signed-off-by: Bitterblue Smith <[email protected]> Acked-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-10-17wifi: rtw88: Fix the RX aggregation in USB 3 modeBitterblue Smith1-1/+0
RTL8822CU, RTL8822BU, and RTL8821CU don't need BIT_EN_PRE_CALC. In fact, RTL8822BU in USB 3 mode doesn't pass all the frames to the driver, resulting in much lower download speed than normal: $ iperf3 -c 192.168.0.1 -R Connecting to host 192.168.0.1, port 5201 Reverse mode, remote host 192.168.0.1 is sending [ 5] local 192.168.0.50 port 43062 connected to 192.168.0.1 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 26.9 MBytes 225 Mbits/sec [ 5] 1.00-2.00 sec 7.50 MBytes 62.9 Mbits/sec [ 5] 2.00-3.00 sec 8.50 MBytes 71.3 Mbits/sec [ 5] 3.00-4.00 sec 8.38 MBytes 70.3 Mbits/sec [ 5] 4.00-5.00 sec 7.75 MBytes 65.0 Mbits/sec [ 5] 5.00-6.00 sec 8.00 MBytes 67.1 Mbits/sec [ 5] 6.00-7.00 sec 8.00 MBytes 67.1 Mbits/sec [ 5] 7.00-8.00 sec 7.75 MBytes 65.0 Mbits/sec [ 5] 8.00-9.00 sec 7.88 MBytes 66.1 Mbits/sec [ 5] 9.00-10.00 sec 7.88 MBytes 66.1 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.02 sec 102 MBytes 85.1 Mbits/sec 224 sender [ 5] 0.00-10.00 sec 98.6 MBytes 82.7 Mbits/sec receiver Don't set BIT_EN_PRE_CALC. Then the speed is much better: % iperf3 -c 192.168.0.1 -R Connecting to host 192.168.0.1, port 5201 Reverse mode, remote host 192.168.0.1 is sending [ 5] local 192.168.0.50 port 39000 connected to 192.168.0.1 port 5201 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 52.8 MBytes 442 Mbits/sec [ 5] 1.00-2.00 sec 71.9 MBytes 603 Mbits/sec [ 5] 2.00-3.00 sec 74.8 MBytes 627 Mbits/sec [ 5] 3.00-4.00 sec 75.9 MBytes 636 Mbits/sec [ 5] 4.00-5.00 sec 76.0 MBytes 638 Mbits/sec [ 5] 5.00-6.00 sec 74.1 MBytes 622 Mbits/sec [ 5] 6.00-7.00 sec 74.0 MBytes 621 Mbits/sec [ 5] 7.00-8.00 sec 76.0 MBytes 638 Mbits/sec [ 5] 8.00-9.00 sec 74.4 MBytes 624 Mbits/sec [ 5] 9.00-10.00 sec 63.9 MBytes 536 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 717 MBytes 601 Mbits/sec 24 sender [ 5] 0.00-10.00 sec 714 MBytes 599 Mbits/sec receiver Fixes: 002a5db9a52a ("wifi: rtw88: Enable USB RX aggregation for 8822c/8822b/8821c") Signed-off-by: Bitterblue Smith <[email protected]> Acked-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-10-17wifi: brcm80211: BRCM_TRACING should depend on TRACINGGeert Uytterhoeven1-0/+1
When tracing is disabled, there is no point in asking the user about enabling Broadcom wireless device tracing. Fixes: f5c4f10852d42012 ("brcm80211: Allow trace support to be enabled separately from debug") Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Arend van Spriel <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/81a29b15eaacc1ac1fb421bdace9ac0c3385f40f.1727179742.git.geert@linux-m68k.org
2024-10-17wifi: rtw89: pci: early chips only enable 36-bit DMA on specific PCI hostsPing-Ke Shih1-7/+41
The early chips including RTL8852A, RTL8851B, RTL8852B and RTL8852BT have interoperability problems of 36-bit DMA with some PCI hosts. Rollback to 32-bit DMA by default, and only enable 36-bit DMA for tested platforms. Since all Intel platforms we have can work correctly, add the vendor ID to white list. Otherwise, list vendor/device ID of bridge we have tested. Fixes: 1fd4b3fe52ef ("wifi: rtw89: pci: support 36-bit PCI DMA address") Reported-by: Marcel Weißenbach <[email protected]> Closes: https://lore.kernel.org/linux-wireless/[email protected]/T/#m07c5694df1acb173a42e1a0bab7ac22bd231a2b8 Signed-off-by: Ping-Ke Shih <[email protected]> Tested-by: Marcel Weißenbach <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-10-17net/mlx5e: Don't call cleanup on profile rollback failureCosmin Ratiu1-1/+3
When profile rollback fails in mlx5e_netdev_change_profile, the netdev profile var is left set to NULL. Avoid a crash when unloading the driver by not calling profile->cleanup in such a case. This was encountered while testing, with the original trigger that the wq rescuer thread creation got interrupted (presumably due to Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by mlx5e_priv_init, the profile rollback also fails for the same reason (signal still active) so the profile is left as NULL, leading to a crash later in _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2) [ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12 [ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12 [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 745.538222] #PF: supervisor read access in kernel mode <snipped> [ 745.551290] Call Trace: [ 745.551590] <TASK> [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] auxiliary_bus_remove+0x18/0x30 [ 745.557134] device_release_driver_internal+0x1df/0x240 [ 745.557654] bus_remove_device+0xd7/0x140 [ 745.558075] device_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] do_syscall_64+0x6d/0x140 [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b Fixes: 3ef14e463f6e ("net/mlx5e: Separate between netdev objects and mlx5e profiles initialization") Signed-off-by: Cosmin Ratiu <[email protected]> Reviewed-by: Dragos Tatulea <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17net/mlx5: Unregister notifier on eswitch init failureCosmin Ratiu1-2/+3
It otherwise remains registered and a subsequent attempt at eswitch enabling might trigger warnings of the sort: [ 682.589148] ------------[ cut here ]------------ [ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered [ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90 [...snipped] [ 682.610052] Call Trace: [ 682.610369] <TASK> [ 682.610663] ? __warn+0x7c/0x110 [ 682.611050] ? notifier_chain_register+0x3e/0x90 [ 682.611556] ? report_bug+0x148/0x170 [ 682.611977] ? handle_bug+0x36/0x70 [ 682.612384] ? exc_invalid_op+0x13/0x60 [ 682.612817] ? asm_exc_invalid_op+0x16/0x20 [ 682.613284] ? notifier_chain_register+0x3e/0x90 [ 682.613789] atomic_notifier_chain_register+0x25/0x40 [ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core] [ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core] [ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core] [ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core] [ 682.616789] sriov_numvfs_store+0xb0/0x1b0 [ 682.617248] kernfs_fop_write_iter+0x117/0x1a0 [ 682.617734] vfs_write+0x231/0x3f0 [ 682.618138] ksys_write+0x63/0xe0 [ 682.618536] do_syscall_64+0x4c/0x100 [ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 7624e58a8b3a ("net/mlx5: E-switch, register event handler before arming the event") Signed-off-by: Cosmin Ratiu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17net/mlx5: Fix command bitmask initializationShay Drory1-2/+6
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit isn't Initialize during command bitmask Initialization, only during MANAGE_PAGES. In addition, mlx5_cmd_trigger_completions() is trying to trigger completion for MANAGE_PAGES command as well. Hence, in case health error occurred before any MANAGE_PAGES command have been invoke (for example, during mlx5_enable_hca()), mlx5_cmd_trigger_completions() will try to trigger completion for MANAGE_PAGES command, which will result in null-ptr-deref error.[1] Fix it by Initialize command bitmask correctly. While at it, re-write the code for better understanding. [1] BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078 CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core] Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 kasan_report+0xb9/0xf0 kasan_check_range+0xec/0x190 mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core] mlx5_cmd_flush+0x94/0x240 [mlx5_core] enter_error_state+0x6c/0xd0 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core] process_one_work+0x787/0x1490 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x586/0xd30 ? rescuer_thread+0xae0/0xae0 kthread+0x2df/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17net/mlx5: Check for invalid vector index on EQ creationMaher Sanalla1-0/+6
Currently, mlx5 driver does not enforce vector index to be lower than the maximum number of supported completion vectors when requesting a new completion EQ. Thus, mlx5_comp_eqn_get() fails when trying to acquire an IRQ with an improper vector index. To prevent the case above, enforce that vector index value is valid and lower than maximum in mlx5_comp_eqn_get() before handling the request. Fixes: f14c1a14e632 ("net/mlx5: Allocate completion EQs dynamically") Signed-off-by: Maher Sanalla <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17net/mlx5: HWS, use lock classes for bwc locksCosmin Ratiu2-2/+19
The HWS BWC API uses one lock per queue and usually acquires one of them, except when doing changes which require locking all queues in order. Naturally, lockdep isn't too happy about acquiring the same lock class multiple times, so inform it that each queue lock is a different class to avoid false positives. Fixes: 2ca62599aa0b ("net/mlx5: HWS, added send engine and context handling") Signed-off-by: Cosmin Ratiu <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17net/mlx5: HWS, don't destroy more bwc queue locks than allocatedCosmin Ratiu1-1/+1
hws_send_queues_bwc_locks_destroy destroyed more queue locks than allocated, leading to memory corruption (occasionally) and warnings such as DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) in __mutex_destroy because sometimes, the 'mutex' being destroyed was random memory. The severity of this problem is proportional to the number of queues configured because the code overreaches beyond the end of the bwc_send_queue_locks array by 2x its length. Fix that by using the correct number of bwc queues. Fixes: 2ca62599aa0b ("net/mlx5: HWS, added send engine and context handling") Signed-off-by: Cosmin Ratiu <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17net/mlx5: HWS, fixed double free in error flow of definer layoutYevgeny Kliteynik1-2/+2
Fix error flow bug that could lead to double free of a buffer during a failure to calculate a suitable definer layout. Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Itamar Gozlan <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17net/mlx5: HWS, removed wrong access to a number of rules variableYevgeny Kliteynik1-3/+1
Removed wrong access to the num_of_rules field of the matcher. This is a usual u32 variable, but the access was as if it was atomic. This fixes the following CI warnings: mlx5hws_bwc.c:708:17: warning: large atomic operation may incur significant performance penalty; the access size (4 bytes) exceeds the max lock-free size (0 bytes) [-Watomic-alignment] Fixes: 510f9f61a112 ("net/mlx5: HWS, added API and enabled HWS support") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Itamar Gozlan <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17net: ethernet: mtk_eth_soc: fix memory corruption during fq dma initFelix Fietkau1-1/+1
The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must only touch as many descriptors, otherwise it ends up corrupting unrelated memory. Fix the loop iteration count accordingly. Fixes: c57e55819443 ("net: ethernet: mtk_eth_soc: handle dma buffer size soc specific") Signed-off-by: Felix Fietkau <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-10-17vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frameDaniel Borkmann1-1/+1
Andrew and Nikolay reported connectivity issues with Cilium's service load-balancing in case of vmxnet3. If a BPF program for native XDP adds an encapsulation header such as IPIP and transmits the packet out the same interface, then in case of vmxnet3 a corrupted packet is being sent and subsequently dropped on the path. vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp() through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address: page = virt_to_page(xdpf->data); tbi->dma_addr = page_pool_get_dma_addr(page) + VMXNET3_XDP_HEADROOM; dma_sync_single_for_device(&adapter->pdev->dev, tbi->dma_addr, buf_size, DMA_TO_DEVICE); The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP BPF program could have moved xdp->data. While the passed buf_size is correct (xdpf->len), the dma_addr needs to have a dynamic offset which can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data - xdp->data_hard_start. Fixes: 54f00cce1178 ("vmxnet3: Add XDP support.") Reported-by: Andrew Sauber <[email protected]> Reported-by: Nikolay Nikolaev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Nikolay Nikolaev <[email protected]> Acked-by: Anton Protopopov <[email protected]> Cc: William Tu <[email protected]> Cc: Ronak Doshi <[email protected]> Link: https://patch.msgid.link/a0888656d7f09028f9984498cc698bb5364d89fc.1728931137.git.daniel@iogearbox.net Signed-off-by: Paolo Abeni <[email protected]>
2024-10-16wifi: ath11k: Fix invalid ring usage in full monitor modeRemi Pommarel1-2/+5
On full monitor HW the monitor destination rxdma ring does not have the same descriptor format as in the "classical" mode. The full monitor destination entries are of hal_sw_monitor_ring type and fetched using ath11k_dp_full_mon_process_rx while the classical ones are of type hal_reo_entrance_ring and fetched with ath11k_dp_rx_mon_dest_process. Although both hal_sw_monitor_ring and hal_reo_entrance_ring are of same size, the offset to useful info (such as sw_cookie, paddr, etc) are different. Thus if ath11k_dp_rx_mon_dest_process gets called on full monitor destination ring, invalid skb buffer id will be fetched from DMA ring causing issues such as the following rcu_sched stall: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 0-....: (1 GPs behind) idle=c67/0/0x7 softirq=45768/45769 fqs=1012 (t=2100 jiffies g=14817 q=8703) Task dump for CPU 0: task:swapper/0 state:R running task stack: 0 pid: 0 ppid: 0 flags:0x0000000a Call trace: dump_backtrace+0x0/0x160 show_stack+0x14/0x20 sched_show_task+0x158/0x184 dump_cpu_task+0x40/0x4c rcu_dump_cpu_stacks+0xec/0x12c rcu_sched_clock_irq+0x6c8/0x8a0 update_process_times+0x88/0xd0 tick_sched_timer+0x74/0x1e0 __hrtimer_run_queues+0x150/0x204 hrtimer_interrupt+0xe4/0x240 arch_timer_handler_phys+0x30/0x40 handle_percpu_devid_irq+0x80/0x130 handle_domain_irq+0x5c/0x90 gic_handle_irq+0x8c/0xb4 do_interrupt_handler+0x30/0x54 el1_interrupt+0x2c/0x4c el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x74/0x78 do_raw_spin_lock+0x60/0x100 _raw_spin_lock_bh+0x1c/0x2c ath11k_dp_rx_mon_mpdu_pop.constprop.0+0x174/0x650 ath11k_dp_rx_process_mon_status+0x8b4/0xa80 ath11k_dp_rx_process_mon_rings+0x244/0x510 ath11k_dp_service_srng+0x190/0x300 ath11k_pcic_ext_grp_napi_poll+0x30/0xc0 __napi_poll+0x34/0x174 net_rx_action+0xf8/0x2a0 _stext+0x12c/0x2ac irq_exit+0x94/0xc0 handle_domain_irq+0x60/0x90 gic_handle_irq+0x8c/0xb4 call_on_irq_stack+0x28/0x44 do_interrupt_handler+0x4c/0x54 el1_interrupt+0x2c/0x4c el1h_64_irq_handler+0x14/0x1c el1h_64_irq+0x74/0x78 arch_cpu_idle+0x14/0x20 do_idle+0xf0/0x130 cpu_startup_entry+0x24/0x50 rest_init+0xf8/0x104 arch_call_rest_init+0xc/0x14 start_kernel+0x56c/0x58c __primary_switched+0xa0/0xa8 Thus ath11k_dp_rx_mon_dest_process(), which use classical destination entry format, should no be called on full monitor capable HW. Fixes: 67a9d399fcb0 ("ath11k: enable RX PPDU stats in monitor co-exist mode") Signed-off-by: Remi Pommarel <[email protected]> Reviewed-by: Praneesh P <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jeff Johnson <[email protected]>
2024-10-16wifi: ath10k: Fix memory leak in management txManikanta Pubbisetty2-1/+8
In the current logic, memory is allocated for storing the MSDU context during management packet TX but this memory is not being freed during management TX completion. Similar leaks are seen in the management TX cleanup logic. Kmemleak reports this problem as below, unreferenced object 0xffffff80b64ed250 (size 16): comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s) hex dump (first 16 bytes): 00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t...... backtrace: [<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8 [<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110 [<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core] [<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core] [<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400 [<ffffffe6e78d60b8>] worker_thread+0x208/0x328 [<ffffffe6e78dc890>] kthread+0x100/0x1c0 [<ffffffe6e78166c0>] ret_from_fork+0x10/0x20 Free the memory during completion and cleanup to fix the leak. Protect the mgmt_pending_tx idr_remove() operation in ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to other instances. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 Fixes: dc405152bb64 ("ath10k: handle mgmt tx completion event") Fixes: c730c477176a ("ath10k: Remove msdu from idr when management pkt send fails") Cc: [email protected] Signed-off-by: Manikanta Pubbisetty <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jeff Johnson <[email protected]>
2024-10-15net: dsa: vsc73xx: fix reception from VLAN-unaware bridgesVladimir Oltean1-1/+0
Similar to the situation described for sja1105 in commit 1f9fc48fd302 ("net: dsa: sja1105: fix reception from VLAN-unaware bridges"), the vsc73xx driver uses tag_8021q and doesn't need the ds->untag_bridge_pvid request. In fact, this option breaks packet reception. The ds->untag_bridge_pvid option strips VLANs from packets received on VLAN-unaware bridge ports. But those VLANs should already be stripped by tag_vsc73xx_8021q.c as part of vsc73xx_rcv() - they are not VLANs in VLAN-unaware mode, but DSA tags. Thus, dsa_software_vlan_untag() tries to untag a VLAN that doesn't exist, corrupting the packet. Fixes: 93e4649efa96 ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges") Tested-by: Pawel Dembicki <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: ravb: Only advertise Rx/Tx timestamps if hardware supports itNiklas Söderlund1-13/+12
Recent work moving the reporting of Rx software timestamps to the core [1] highlighted an issue where hardware time stamping was advertised for the platforms where it is not supported. Fix this by covering advertising support for hardware timestamps only if the hardware supports it. Due to the Tx implementation in RAVB software Tx timestamping is also only considered if the hardware supports hardware timestamps. This should be addressed in future, but this fix only reflects what the driver currently implements. 1. Commit 277901ee3a26 ("ravb: Remove setting of RX software timestamp") Fixes: 7e09a052dc4e ("ravb: Exclude gPTP feature support for RZ/G2L") Signed-off-by: Niklas Söderlund <[email protected]> Reviewed-by: Paul Barker <[email protected]> Tested-by: Paul Barker <[email protected]> Reviewed-by: Sergey Shtylyov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()Jinjie Ruan1-0/+2
Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test") fixed the use-after-free error, but introduced below memory leaks by removing necessary vcap_free_rule(), add it to fix it. unreferenced object 0xffffff80ca58b700 (size 192): comm "kunit_try_catch", pid 1215, jiffies 4294898264 hex dump (first 32 bytes): 00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d... 00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................ backtrace (crc 9c09c3fe): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4 [<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0400 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X..... 39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9............... backtrace (crc daf014e9): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0700 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898265 hex dump (first 32 bytes): 80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X..... 3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../...... backtrace (crc 8d877792): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c [<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0900 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................ 7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }............... backtrace (crc 34181e56): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80cc0b0980 (size 64): comm "kunit_try_catch", pid 1215, jiffies 4294898266 hex dump (first 32 bytes): 18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X............. 67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t..... backtrace (crc 275fd9be): [<0000000052a0be73>] kmemleak_alloc+0x34/0x40 [<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4 [<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528 [<000000001396a1a2>] test_add_def_fields+0xb0/0x100 [<000000006e7621f0>] vcap_val_rule+0xa98/0x13e8 [<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0 [<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac [<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000c5d82c9a>] kthread+0x2e8/0x374 [<00000000f4287308>] ret_from_fork+0x10/0x20 ...... Cc: [email protected] Fixes: a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test") Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jens Emil Schulz Østergaard <[email protected]> Signed-off-by: Jinjie Ruan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: phy: mdio-bcm-unimac: Add BCM6846 supportLinus Walleij1-0/+1
Add Unimac mdio compatible string for the special BCM6846 variant. This variant has a few extra registers compared to other versions. Suggested-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/linux-devicetree/[email protected]/ Signed-off-by: Linus Walleij <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361Peter Rashleigh1-1/+1
According to the Marvell datasheet the 88E6361 has two VTU pages (4k VIDs per page) so the max_vid should be 8191, not 4095. In the current implementation mv88e6xxx_vtu_walk() gives unexpected results because of this error. I verified that mv88e6xxx_vtu_walk() works correctly on the MV88E6361 with this patch in place. Fixes: 12899f299803 ("net: dsa: mv88e6xxx: enable support for 88E6361 switch") Signed-off-by: Peter Rashleigh <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: bcmasp: fix potential memory leak in bcmasp_xmit()Wang Hai1-0/+1
The bcmasp_xmit() returns NETDEV_TX_OK without freeing skb in case of mapping fails, add dev_kfree_skb() to fix it. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Wang Hai <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: systemport: fix potential memory leak in bcm_sysport_xmit()Wang Hai1-0/+1
The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb() to fix it. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Wang Hai <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: ethernet: rtsn: fix potential memory leak in rtsn_start_xmit()Wang Hai1-0/+1
The rtsn_start_xmit() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb_any() to fix it. Fixes: b0d3969d2b4d ("net: ethernet: rtsn: Add support for Renesas Ethernet-TSN") Signed-off-by: Wang Hai <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: xilinx: axienet: fix potential memory leak in axienet_start_xmit()Wang Hai1-0/+2
The axienet_start_xmit() returns NETDEV_TX_OK without freeing skb in case of dma_map_single() fails, add dev_kfree_skb_any() to fix it. Fixes: 71791dc8bdea ("net: axienet: Check for DMA mapping errors") Signed-off-by: Wang Hai <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: macb: Avoid 20s boot delay by skipping MDIO bus registration for ↵Oleksij Rempel1-3/+11
fixed-link PHY A boot delay was introduced by commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node"). This delay was caused by the call to `mdiobus_register()` in cases where a fixed-link PHY was present. The MDIO bus registration triggered unnecessary PHY address scans, leading to a 20-second delay due to attempts to detect Clause 45 (C45) compatible PHYs, despite no MDIO bus being attached. The commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node") was originally introduced to fix a regression caused by commit 7897b071ac3b4 ("net: macb: convert to phylink"), which caused the driver to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings like: mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0 ... mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31 This patch reworks the logic to avoid registering and allocation of the MDIO bus when: - The device tree contains a fixed-link node. - There is no "mdio" child node in the device tree. If a child node named "mdio" exists, the MDIO bus will be registered to support PHYs attached to the MACB's MDIO bus. Otherwise, with only a fixed-link, the MDIO bus is skipped. Tested on a sama5d35 based system with a ksz8863 switch attached to macb0. Fixes: 79540d133ed6 ("net: macb: Fix handling of fixed-link node") Signed-off-by: Oleksij Rempel <[email protected]> Cc: [email protected] Reviewed-by: Andrew Lunn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15net: ethernet: aeroflex: fix potential memory leak in greth_start_xmit_gbit()Wang Hai1-1/+2
The greth_start_xmit_gbit() returns NETDEV_TX_OK without freeing skb in case of skb->len being too long, add dev_kfree_skb() to fix it. Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver") Signed-off-by: Wang Hai <[email protected]> Reviewed-by: Gerhard Engleder <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15netdevsim: use cond_resched() in nsim_dev_trap_report_work()Eric Dumazet1-6/+9
I am still seeing many syzbot reports hinting that syzbot might fool nsim_dev_trap_report_work() with hundreds of ports [1] Lets use cond_resched(), and system_unbound_wq instead of implicit system_wq. [1] INFO: task syz-executor:20633 blocked for more than 143 seconds. Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor state:D stack:25856 pid:20633 tgid:20633 ppid:1 flags:0x00004006 ... NMI backtrace for cpu 1 CPU: 1 UID: 0 PID: 16760 Comm: kworker/1:0 Not tainted 6.12.0-rc2-syzkaller-00205-g1d227fcc7222 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events nsim_dev_trap_report_work RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:210 Code: 89 fb e8 23 00 00 00 48 8b 3d 04 fb 9c 0c 48 89 de 5b e9 c3 c7 5d 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0c 25 c0 d7 03 00 65 8b 15 60 f0 RSP: 0018:ffffc90000a187e8 EFLAGS: 00000246 RAX: 0000000000000100 RBX: ffffc90000a188e0 RCX: ffff888027d3bc00 RDX: ffff888027d3bc00 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88804a2e6000 R08: ffffffff8a4bc495 R09: ffffffff89da3577 R10: 0000000000000004 R11: ffffffff8a4bc2b0 R12: dffffc0000000000 R13: ffff88806573b503 R14: dffffc0000000000 R15: ffff8880663cca00 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc90a747f98 CR3: 000000000e734000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 000000000000002b DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 spin_unlock_bh include/linux/spinlock.h:396 [inline] nsim_dev_trap_report drivers/net/netdevsim/dev.c:820 [inline] nsim_dev_trap_report_work+0x75d/0xaa0 drivers/net/netdevsim/dev.c:850 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Fixes: ba5e1272142d ("netdevsim: avoid potential loop in nsim_dev_trap_report_work()") Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Eric Dumazet <[email protected]> Cc: Jiri Pirko <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15macsec: don't increment counters for an unrelated SASabrina Dubroca1-18/+0
On RX, we shouldn't be incrementing the stats for an arbitrary SA in case the actual SA hasn't been set up. Those counters are intended to track packets for their respective AN when the SA isn't currently configured. Due to the way MACsec is implemented, we don't keep counters unless the SA is configured, so we can't track those packets, and those counters will remain at 0. The RXSC's stats keeps track of those packets without telling us which AN they belonged to. We could add counters for non-existent SAs, and then find a way to integrate them in the dump to userspace, but I don't think it's worth the effort. Fixes: 91ec9bd57f35 ("macsec: Fix traffic counters/statistics") Reported-by: Paolo Abeni <[email protected]> Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://patch.msgid.link/f5ac92aaa5b89343232615f4c03f9f95042c6aa0.1728657709.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-15octeontx2-af: Fix potential integer overflows on integer shiftsColin Ian King1-2/+2
The left shift int 32 bit integer constants 1 is evaluated using 32 bit arithmetic and then assigned to a 64 bit unsigned integer. In the case where the shift is 32 or more this can lead to an overflow. Avoid this by shifting using the BIT_ULL macro instead. Fixes: 019aba04f08c ("octeontx2-af: Modify SMQ flush sequence to drop packets") Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-10-15net: stmmac: dwmac-tegra: Fix link bring-up sequenceParitosh Dixit1-2/+12
The Tegra MGBE driver sometimes fails to initialize, reporting the following error, and as a result, it is unable to acquire an IP address with DHCP: tegra-mgbe 6800000.ethernet: timeout waiting for link to become ready As per the recommendation from the Tegra hardware design team, fix this issue by: - clearing the PHY_RDY bit before setting the CDR_RESET bit and then setting PHY_RDY bit before clearing CDR_RESET bit. This ensures valid data is present at UPHY RX inputs before starting the CDR lock. - adding the required delays when bringing up the UPHY lane. Note we need to use delays here because there is no alternative, such as polling, for these cases. Using the usleep_range() instead of ndelay() as sleeping is preferred over busy wait loop. Without this change we would see link failures on boot sometimes as often as 1 in 5 boots. With this fix we have not observed any failures in over 1000 boots. Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support") Signed-off-by: Paritosh Dixit <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-10-15net: usb: usbnet: fix race in probe failureOliver Neukum1-0/+1
The same bug as in the disconnect code path also exists in the case of a failure late during the probe process. The flag must also be set. Signed-off-by: Oliver Neukum <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-10-14net: lan743x: Remove duplicate checkJinjie Ruan1-21/+14
Since timespec64_valid() has been checked in higher layer pc_clock_settime(), the duplicate check in lan743x_ptpci_settime64() can be removed. Acked-by: Richard Cochran <[email protected]> Signed-off-by: Jinjie Ruan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-11net: enetc: disable NAPI after all rings are disabledWei Fang1-6/+6
When running "xdp-bench tx eno0" to test the XDP_TX feature of ENETC on LS1028A, it was found that if the command was re-run multiple times, Rx could not receive the frames, and the result of xdp-bench showed that the rx rate was 0. root@ls1028ardb:~# ./xdp-bench tx eno0 Hairpinning (XDP_TX) packets on eno0 (ifindex 3; driver fsl_enetc) Summary 2046 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s Summary 0 rx/s 0 err,drop/s By observing the Rx PIR and CIR registers, CIR is always 0x7FF and PIR is always 0x7FE, which means that the Rx ring is full and can no longer accommodate other Rx frames. Therefore, the problem is caused by the Rx BD ring not being cleaned up. Further analysis of the code revealed that the Rx BD ring will only be cleaned if the "cleaned_cnt > xdp_tx_in_flight" condition is met. Therefore, some debug logs were added to the driver and the current values of cleaned_cnt and xdp_tx_in_flight were printed when the Rx BD ring was full. The logs are as follows. [ 178.762419] [XDP TX] >> cleaned_cnt:1728, xdp_tx_in_flight:2140 [ 178.771387] [XDP TX] >> cleaned_cnt:1941, xdp_tx_in_flight:2110 [ 178.776058] [XDP TX] >> cleaned_cnt:1792, xdp_tx_in_flight:2110 From the results, the max value of xdp_tx_in_flight has reached 2140. However, the size of the Rx BD ring is only 2048. So xdp_tx_in_flight did not drop to 0 after enetc_stop() is called and the driver does not clear it. The root cause is that NAPI is disabled too aggressively, without having waited for the pending XDP_TX frames to be transmitted, and their buffers recycled, so that xdp_tx_in_flight cannot naturally drop to 0. Later, enetc_free_tx_ring() does free those stale, unsent XDP_TX packets, but it is not coded up to also reset xdp_tx_in_flight, hence the manifestation of the bug. One option would be to cover this extra condition in enetc_free_tx_ring(), but now that the ENETC_TX_DOWN exists, we have created a window at the beginning of enetc_stop() where NAPI can still be scheduled, but any concurrent enqueue will be blocked. Therefore, enetc_wait_bdrs() and enetc_disable_tx_bdrs() can be called with NAPI still scheduled, and it is guaranteed that this will not wait indefinitely, but instead give us an indication that the pending TX frames have orderly dropped to zero. Only then should we call napi_disable(). This way, enetc_free_tx_ring() becomes entirely redundant and can be dropped as part of subsequent cleanup. The change also refactors enetc_start() so that it looks like the mirror opposite procedure of enetc_stop(). Fixes: ff58fda09096 ("net: enetc: prioritize ability to go down over packet processing") Cc: [email protected] Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Tested-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-11net: enetc: disable Tx BD rings after they are emptyWei Fang1-10/+26
The Tx BD rings are disabled first in enetc_stop() and the driver waits for them to become empty. This operation is not safe while the ring is actively transmitting frames, and will cause the ring to not be empty and hardware exception. As described in the NETC block guide, software should only disable an active Tx ring after all pending ring entries have been consumed (i.e. when PI = CI). Disabling a transmit ring that is actively processing BDs risks a HW-SW race hazard whereby a hardware resource becomes assigned to work on one or more ring entries only to have those entries be removed due to the ring becoming disabled. When testing XDP_REDIRECT feautre, although all frames were blocked from being put into Tx rings during ring reconfiguration, the similar warning log was still encountered: fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear The reason is that when there are still unsent frames in the Tx ring, disabling the Tx ring causes the remaining frames to be unable to be sent out. And the Tx ring cannot be restored, which means that even if the xdp program is uninstalled, the Tx frames cannot be sent out anymore. Therefore, correct the operation order in enect_start() and enect_stop(). Fixes: ff58fda09096 ("net: enetc: prioritize ability to go down over packet processing") Cc: [email protected] Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-11net: enetc: block concurrent XDP transmissions during ring reconfigurationWei Fang2-0/+15
When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf91c4c ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: [email protected] Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-11net: enetc: remove xdp_drops statistic from enetc_xdp_drop()Wei Fang1-1/+1
The xdp_drops statistic indicates the number of XDP frames dropped in the Rx direction. However, enetc_xdp_drop() is also used in XDP_TX and XDP_REDIRECT actions. If frame loss occurs in these two actions, the frames loss count should not be included in xdp_drops, because there are already xdp_tx_drops and xdp_redirect_failures to count the frame loss of these two actions, so it's better to remove xdp_drops statistic from enetc_xdp_drop() and increase xdp_drops in XDP_DROP action. Fixes: 7ed2bc80074e ("net: enetc: add support for XDP_TX") Cc: [email protected] Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-11net: sparx5: fix source port register when mirroringDaniel Machon1-6/+6
When port mirroring is added to a port, the bit position of the source port, needs to be written to the register ANA_AC_PROBE_PORT_CFG. This register is replicated for n_ports > 32, and therefore we need to derive the correct register from the port number. Before this patch, we wrongly calculate the register from portno / BITS_PER_BYTE, where the divisor ought to be 32, causing any port >=8 to be written to the wrong register. We fix this, by using do_div(), where the dividend is the register, the remainder is the bit position and the divisor is now 32. Fixes: 4e50d72b3b95 ("net: sparx5: add port mirroring implementation") Signed-off-by: Daniel Machon <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-10slip: make slhc_remember() more robust against malicious packetsEric Dumazet1-23/+34
syzbot found that slhc_remember() was missing checks against malicious packets [1]. slhc_remember() only checked the size of the packet was at least 20, which is not good enough. We need to make sure the packet includes the IPv4 and TCP header that are supposed to be carried. Add iph and th pointers to make the code more readable. [1] BUG: KMSAN: uninit-value in slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 slhc_remember+0x2e8/0x7b0 drivers/net/slip/slhc.c:666 ppp_receive_nonmp_frame+0xe45/0x35e0 drivers/net/ppp/ppp_generic.c:2455 ppp_receive_frame drivers/net/ppp/ppp_generic.c:2372 [inline] ppp_do_recv+0x65f/0x40d0 drivers/net/ppp/ppp_generic.c:2212 ppp_input+0x7dc/0xe60 drivers/net/ppp/ppp_generic.c:2327 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 5460 Comm: syz.2.33 Not tainted 6.12.0-rc2-syzkaller-00006-g87d6aab2389e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Fixes: b5451d783ade ("slip: Move the SLIP drivers") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-10ppp: fix ppp_async_encode() illegal accessEric Dumazet1-1/+1
syzbot reported an issue in ppp_async_encode() [1] In this case, pppoe_sendmsg() is called with a zero size. Then ppp_async_encode() is called with an empty skb. BUG: KMSAN: uninit-value in ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] BUG: KMSAN: uninit-value in ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_encode drivers/net/ppp/ppp_async.c:545 [inline] ppp_async_push+0xb4f/0x2660 drivers/net/ppp/ppp_async.c:675 ppp_async_send+0x130/0x1b0 drivers/net/ppp/ppp_async.c:634 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2280 [inline] ppp_input+0x1f1/0xe60 drivers/net/ppp/ppp_generic.c:2304 pppoe_rcv_core+0x1d3/0x720 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x13b/0x420 include/net/sock.h:1113 __release_sock+0x1da/0x330 net/core/sock.c:3072 release_sock+0x6b/0x250 net/core/sock.c:3626 pppoe_sendmsg+0x2b8/0xb90 drivers/net/ppp/pppoe.c:903 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4092 [inline] slab_alloc_node mm/slub.c:4135 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4187 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1322 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2732 pppoe_sendmsg+0x3a7/0xb90 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:729 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:744 ____sys_sendmsg+0x903/0xb60 net/socket.c:2602 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2656 __sys_sendmmsg+0x3c1/0x960 net/socket.c:2742 __do_sys_sendmmsg net/socket.c:2771 [inline] __se_sys_sendmmsg net/socket.c:2768 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2768 x64_sys_call+0xb6e/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:308 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 1 UID: 0 PID: 5411 Comm: syz.1.14 Not tainted 6.12.0-rc1-syzkaller-00165-g360c1f1f24c6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-10vxlan: Handle error of rtnl_register_module().Kuniyuki Iwashima3-12/+15
Since introduced, vxlan_vnifilter_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-10-09Merge branch '100GbE' of ↵Jakub Kicinski11-35/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-10-08 (ice, i40e, igb, e1000e) This series contains updates to ice, i40e, igb, and e1000e drivers. For ice: Marcin allows driver to load, into safe mode, when DDP package is missing or corrupted and adjusts the netif_is_ice() check to account for when the device is in safe mode. He also fixes an out-of-bounds issue when MSI-X are increased for VFs. Wojciech clears FDB entries on reset to match the hardware state. For i40e: Aleksandr adds locking around MACVLAN filters to prevent memory leaks due to concurrency issues. For igb: Mohamed Khalfella adds a check to not attempt to bring up an already running interface on non-fatal PCIe errors. For e1000e: Vitaly changes board type for I219 to more closely match the hardware and stop PHY issues. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: change I219 (19) devices to ADP igb: Do not bring the device up after non-fatal error i40e: Fix macvlan leak by synchronizing access to mac_filter_hash ice: Fix increasing MSI-X on VF ice: Flush FDB entries before reset ice: Fix netif_is_ice() in Safe Mode ice: Fix entering Safe Mode ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-09net: netconsole: fix wrong warningBreno Leitao1-1/+7
A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative. Fixes: 1ec9daf95093 ("net: netconsole: append userdata to fragmented netconsole messages") Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-09net: fec: don't save PTP state if PTP is unsupportedWei Fang1-2/+4
Some platforms (such as i.MX25 and i.MX27) do not support PTP, so on these platforms fec_ptp_init() is not called and the related members in fep are not initialized. However, fec_ptp_save_state() is called unconditionally, which causes the kernel to panic. Therefore, add a condition so that fec_ptp_save_state() is not called if PTP is not supported. Fixes: a1477dc87dc4 ("net: fec: Restart PPS after link state change") Reported-by: Guenter Roeck <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Wei Fang <[email protected]> Reviewed-by: Csókás, Bence <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Guenter Roeck <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-09net: ibm: emac: mal: add dcr_unmap to _removeRosen Penev1-0/+2
It's done in probe so it should be undone here. Fixes: 1d3bb996481e ("Device tree aware EMAC driver") Signed-off-by: Rosen Penev <[email protected]> Reviewed-by: Breno Leitao <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.