aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2018-05-31Merge tag 'mlx5e-updates-2018-05-29' of ↵David S. Miller6-10/+54
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-05-29 This series includes mlx5 FPGA and mlx5e netdevice updates: 1) Print FPGA info such as device name, vendor id, etc.., from Ilan Tayari. 2) Abort FPGA if some essential capabilities are not supported, from Yevgeny Kliteynik. 3) Two FPGA dma related minor fixes, from Ilya Lesokhin. 4) Use the right table to report offloaded TC rules, from Or Gerlitz. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-05-30Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo23-124/+920
ath.git patches for 4.18. Major changes: ath10k * add memory dump support for QCA9888 and QCA99X0 * add support to configure channel dwell time * support new DFS host confirmation feature in the firmware ath * update various regulatory mappings wcn36xx * various fixes to improve reliability * add Factory Test Mode support
2018-05-30qtnfmac: fix invalid STA state on EAPOL failureSergey Matyukevich2-12/+17
Driver switches vif sta_state into QTNF_STA_CONNECTING when cfg80211 core initiates connect procedure. Further this state is changed either to QTNF_STA_CONNECTED or to QTNF_STA_DISCONNECTED by BSS_JOIN and BSS_LEAVE events from firmware. However it is possible that no such events will be sent by firmware, e.g. if EAPOL timed out. In this case vif sta_mode will remain in QTNF_STA_CONNECTING state and all subsequent connection attempts will fail with -EBUSY error code. Fix this by perfroming STA state transition from QTNF_STA_CONNECTING to QTNF_STA_DISCONNECTED in cfg80211 disconnect callback. No need to rely upon firmware events in this case. Signed-off-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30qtnfmac: cancel scan on disconnectAndrey Shevchenko1-0/+2
Cancel scan operation on STA disconnect. Signed-off-by: Andrey Shevchenko <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30qtnfmac: fix bg_scan_period parameter processingAndrey Shevchenko2-7/+3
Do not process bg_scan_period parameter in qtnfmac driver. Pass correct values as is. In the case of invalid values pass default value. Leave further processing to firmware. Signed-off-by: Andrey Shevchenko <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30qtnfmac: fix firmware command error pathDmitry Lebed2-1/+4
Free command skb if bus state is not QTNF_FW_STATE_ACTIVE. Signed-off-by: Dmitry Lebed <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30qtnfmac: improve control path timeout handlingDmitry Lebed3-5/+15
Control path will not be operational after firmware failure. Change bus state to QTNF_FW_STATE_EP_DEAD after the control path timeout. Don't wait for timeout if control path is already dead. Signed-off-by: Dmitry Lebed <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30qtnfmac: cleanup wdev structure between its usesSergey Matyukevich2-6/+3
Driver uses statically allocated wdev structures for each virtual interface. However wdev structure is not properly cleaned up between its uses. As a result, various bugs appear when userspace tools like hostapd were not gracefully stopped. In particular, this commit fixes the following issue: - start hostapd with more than 2 mBSS - kill hostapd using SIGKILL - start again hostapd with more than 2 mBSS However only two mBSS entities will be started: primary and the last BSS listed in hostapd config. Signed-off-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30qtnfmac: decode error codes from firmware repliesIgor Mitsyanko2-2/+26
Introduce a function that will map an error code reported in reply to a firmware command, into one of standard errno codes. Use additional error codes to improve error reporting for MAC address changes. Signed-off-by: Igor Mitsyanko <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30qtnfmac: simplify notationSergey Matyukevich1-12/+13
Shorten line lengths using a more compact notation to access mac info. Signed-off-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30qtnfmac: remove unused function declarationsAndrey Shevchenko1-5/+0
Functions qtnf_cmd_resp_parse and qtnf_cmd_resp_check have been removed. Remove their declarations as well. Signed-off-by: Andrey Shevchenko <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-05-30drivers/net: Fix various unnecessary characters after logging newlinesJoe Perches11-21/+18
Remove and coalesce formats when there is an unnecessary character after a logging newline. These extra characters cause logging defects. Miscellanea: o Coalesce formats Signed-off-by: Joe Perches <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-30net: davinci: fix building davinci mdio code without CONFIG_OFArnd Bergmann1-3/+1
Test-building this driver on targets without CONFIG_OF revealed a build failure: drivers/net/ethernet/ti/davinci_mdio.c: In function 'davinci_mdio_probe': drivers/net/ethernet/ti/davinci_mdio.c:380:9: error: implicit declaration of function 'davinci_mdio_probe_dt'; did you mean 'davinci_mdio_probe'? [-Werror=implicit-function-declaration] This adjusts the #ifdef logic in the driver to make it build in all configurations. Fixes: 2652113ff043 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Sekhar Nori <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-30net: ethernet: freescale: fix false-positive string overflow warningArnd Bergmann1-1/+1
While compile-testing on arm64 with gcc-8.1, I ran into a build diagnostic: drivers/net/ethernet/freescale/fec_main.c: In function 'fec_probe': drivers/net/ethernet/freescale/fec_main.c:3517:25: error: '%d' directive writing between 1 and 10 bytes into a region of size 5 [-Werror=format-overflow=] sprintf(irq_name, "int%d", i); ^~ drivers/net/ethernet/freescale/fec_main.c:3517:21: note: directive argument in the range [0, 2147483646] sprintf(irq_name, "int%d", i); ^~~~~~~ drivers/net/ethernet/freescale/fec_main.c:3517:3: note: 'sprintf' output between 5 and 14 bytes into a destination of size 8 sprintf(irq_name, "int%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ It appears this has never shown on ppc32 or arm32 for an unknown reason, but now gcc fails to identify that the 'irq_cnt' loop index has an upper bound of 3, and instead uses a bogus range. To work around the warning, this changes the sprintf to snprintf with the correct buffer length. Fixes: 78cc6e7ef957 ("net: ethernet: freescale: Allow FEC with COMPILE_TEST") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Fugang Duan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-30iwlwifi: fix non_shared_ant for 9000 devicesErel Geron1-1/+1
The non-shared antenna was wrong for 9000 device series. Fix it to ANT_B for correct antenna preference by coex in MVM driver. Fixes: 89374fe60bfb ("iwlwifi: Add new PCI IDs for 9260 and 5165 series") Signed-off-by: Erel Geron <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-30iwlwifi: mvm: fix race in queue notification waitJohannes Berg1-8/+8
Initially in this code, the race didn't matter since it didn't do anything. Latest with the commit I marked this as fixing it started to matter as something got done here that needed other data that got freed as soon as the queue notification wait was returning. In the scenario we saw, apparently the IWL_MVM_RXQ_NOTIF_DEL_BA event was sent to all queues, but processing the last event we returned from iwl_mvm_sync_rx_queues_internal() and then from iwl_mvm_free_reorder() and continued some processing before wl_mvm_del_ba() was even invoked on the other CPU. Thus, when the latter finally ran, it found that mvm->baid_map[baid] was no longer valid. Correct the race by moving the counter decrement and wake_up() to be done only after all the per-event processing completed. Note that in the commit I marked as being fixed the wake_up() didn't exist yet (and the code was otherwise problematic) but this particular problem already existed in a way. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-30iwlwifi: mvm: honor the max_amsdu_subframes limitEmmanuel Grumbach1-0/+4
A peer can limit the number of subframes it can handle in a single A-MSDU. Honor this limit. Note that the smallest limit is 8, and we are very unlikely to reach that limit. So this isn't really a big deal. Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-30iwlwifi: mvm: open BA session only when sta is authorizedGregory Greenman5-36/+29
Currently, a BA session is opened when the tx traffic exceeds 10 frames per second. As a result of inter-op problems with some APs, add a condition to open BA session only when station is already authorized. Fixes: 482e48440a0e ("iwlwifi: mvm: change open and close criteria of a BA session") Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-30iwlwifi: mvm: remove division by size of sizeof(struct ieee80211_wmm_rule)Colin Ian King1-2/+1
The subtraction of two struct ieee80211_wmm_rule pointers leaves a result that is automatically scaled down by the size of the size of pointed-to type, hence the division by sizeof(struct ieee80211_wmm_rule) is bogus and should be removed. Detected by CoverityScan, CID#1467777 ("Extra sizeof expression") Fixes: 77e30e10ee28 ("iwlwifi: mvm: query regdb for wmm rule if needed") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-30iwlwifi: pcie: fix race in Rx buffer allocatorShaul Triebitz1-0/+2
Make sure the rx_allocator worker is canceled before running the rx_init routine. rx_init frees and re-allocates all rxb's pages. The rx_allocator worker also allocates pages for the used rxb's. Running rx_init and rx_allocator simultaniously causes a kernel panic. Fix that by canceling the work in rx_init. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-30iwlwifi: mvm: fix TSO with highly fragmented SKBsEmmanuel Grumbach1-6/+6
Our hardware has a limited amount of buffer descriptors for each Tx packet. Because of that, there is a short piece of code that makes sure that that we don't push too many subframes in an A-MSDU because of subframes needs 2 buffer descriptors. This code also takes into account the number of fragment of the skb since we also need a buffer descriptor for each fragment in the skb. This piece of code though didn't check that the resulting number of subframes wasn't 0. A user reported that using NFS client, he could get skbs that are so fragmented that the code mentioned above returned 0 for the number of subframes making skb_gso_segment fail and subconsequently iwlwifi would WARN. Fix this by make sure that num_subframes is at least 1. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=199209 Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-30iwlmvm: tdls: Check TDLS channel switch supportAviya Erenfeld1-5/+11
Some versions of the FW don't support channel switch in TDLS. Add a condition that checks it. Fixes: 307e47235a10 ("iwlwifi: mvm: configure TDLS peers to FW") Signed-off-by: Aviya Erenfeld <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-30iwlwifi: mvm: drop UNKNOWN security type framesSara Sharon2-4/+17
In some cases we may get from FW errored frames with UNKNOWN security type. This may happen in unsecured aggregation flow, where the first packet had a CRC error in the WEP bit, which was followed by a failure to decrypt and was dropped. The next frames in the aggregation "inherit" the bad metadata of the first packet. Make sure to drop such frames since RADA and other offloads will not operate correctly which may have unexpected results. In case of AP it also causes to TX AMSDU frames to the peers, resulting with assert 0x104B. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-05-29net/mlx5e: Get the number of offloaded TC rules from the correct tableOr Gerlitz2-4/+8
As we keep the offloaded TC rules for NIC and e-switch in two different places, make sure to return the number of offloaded flows according to the use-case and not blindly from the priv. Fixes: 655dc3d2b91b ('net/mlx5e: Use shared table for offloaded TC eswitch flows') Signed-off-by: Or Gerlitz <[email protected]> Reported-by: Paul Blakey <[email protected]> Reviewed-by: Paul Blakey <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2018-05-29net/mlx5: FPGA, Call DMA unmap with the right sizeIlya Lesokhin1-2/+1
When mlx5_fpga_conn_unmap_buf is called buf->sg[0].size should equal the actual buffer size, not the message size. Otherwise we will trigger the following dma debug warning "DMA-API: device driver frees DMA memory with different size" Fixes: 537a50574175 ('net/mlx5: FPGA, Add high-speed connection routines') Signed-off-by: Ilya Lesokhin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2018-05-29net/mlx5: FPGA, Properly initialize dma direction on fpga conn sendIlya Lesokhin1-0/+1
Properly initialize dma direction on fpga conn send. Do not rely on dma_dir == 0 (DMA_BIDIRECTIONAL). Signed-off-by: Ilya Lesokhin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2018-05-29net/mlx5: FPGA, Abort FPGA init if the device reports no QP capabilityYevgeny Kliteynik1-0/+6
In the case that the reported max number of QPs capability equals to zero, abort FPGA init. Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Adi Nissim <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2018-05-29net/mlx5: FPGA, print SBU identification on initIlan Tayari1-2/+5
Add print of the following values on init: 1. ieee vendor id 2. sandbox product id 3. sandbox product version Signed-off-by: Ilan Tayari <[email protected]> Signed-off-by: Adi Nissim <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2018-05-29net/mlx5: FPGA, Add device nameIlan Tayari2-3/+28
Add device name for Mellanox FPGA devices. Signed-off-by: Ilan Tayari <[email protected]> Signed-off-by: Adi Nissim <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2018-05-29net/mlx5: FPGA, Add doxygen for access type enumIlan Tayari1-0/+6
Add doxygen comments for enum mlx5_fpga_access_type. Signed-off-by: Ilan Tayari <[email protected]> Signed-off-by: Adi Nissim <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2018-05-29tun: Fix NULL pointer dereference in XDP redirectToshiaki Makita1-6/+9
Calling XDP redirection requires bh disabled. Softirq can call another XDP function and redirection functions, then the percpu static variable ri->map can be overwritten to NULL. This is a generic XDP case called from tun. [ 3535.736058] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 3535.743974] PGD 0 P4D 0 [ 3535.746530] Oops: 0000 [#1] SMP PTI [ 3535.750049] Modules linked in: vhost_net vhost tap tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat ext4 mbcache jbd2 intel_rapl skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm ipmi_ssif irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc ses aesni_intel crypto_simd cryptd enclosure hpwdt hpilo glue_helper ipmi_si pcspkr wmi mei_me ioatdma mei ipmi_devintf shpchp dca ipmi_msghandler lpc_ich acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm smartpqi i40e crc32c_intel scsi_transport_sas tg3 i2c_core ptp pps_core [ 3535.813456] CPU: 5 PID: 1630 Comm: vhost-1614 Not tainted 4.17.0-rc4 #2 [ 3535.820127] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 11/14/2017 [ 3535.828732] RIP: 0010:__xdp_map_lookup_elem+0x5/0x30 [ 3535.833740] RSP: 0018:ffffb4bc47bf7c58 EFLAGS: 00010246 [ 3535.839009] RAX: ffff9fdfcfea1c40 RBX: 0000000000000000 RCX: ffff9fdf27fe3100 [ 3535.846205] RDX: ffff9fdfca769200 RSI: 0000000000000000 RDI: 0000000000000000 [ 3535.853402] RBP: ffffb4bc491d9000 R08: 00000000000045ad R09: 0000000000000ec0 [ 3535.860597] R10: 0000000000000001 R11: ffff9fdf26c3ce4e R12: ffff9fdf9e72c000 [ 3535.867794] R13: 0000000000000000 R14: fffffffffffffff2 R15: ffff9fdfc82cdd00 [ 3535.874990] FS: 0000000000000000(0000) GS:ffff9fdfcfe80000(0000) knlGS:0000000000000000 [ 3535.883152] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3535.888948] CR2: 0000000000000018 CR3: 0000000bde724004 CR4: 00000000007626e0 [ 3535.896145] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3535.903342] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3535.910538] PKRU: 55555554 [ 3535.913267] Call Trace: [ 3535.915736] xdp_do_generic_redirect+0x7a/0x310 [ 3535.920310] do_xdp_generic.part.117+0x285/0x370 [ 3535.924970] tun_get_user+0x5b9/0x1260 [tun] [ 3535.929279] tun_sendmsg+0x52/0x70 [tun] [ 3535.933237] handle_tx+0x2ad/0x5f0 [vhost_net] [ 3535.937721] vhost_worker+0xa5/0x100 [vhost] [ 3535.942030] kthread+0xf5/0x130 [ 3535.945198] ? vhost_dev_ioctl+0x3b0/0x3b0 [vhost] [ 3535.950031] ? kthread_bind+0x10/0x10 [ 3535.953727] ret_from_fork+0x35/0x40 [ 3535.957334] Code: 0e 74 15 83 f8 10 75 05 e9 49 aa b3 ff f3 c3 0f 1f 80 00 00 00 00 f3 c3 e9 29 9d b3 ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <8b> 47 18 83 f8 0e 74 0d 83 f8 10 75 05 e9 49 a9 b3 ff 31 c0 c3 [ 3535.976387] RIP: __xdp_map_lookup_elem+0x5/0x30 RSP: ffffb4bc47bf7c58 [ 3535.982883] CR2: 0000000000000018 [ 3535.987096] ---[ end trace 383b299dd1430240 ]--- [ 3536.131325] Kernel panic - not syncing: Fatal exception [ 3536.137484] Kernel Offset: 0x26a00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 3536.281406] ---[ end Kernel panic - not syncing: Fatal exception ]--- And a kernel with generic case fixed still panics in tun driver XDP redirect, because it disabled only preemption, but not bh. [ 2055.128746] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 2055.136662] PGD 0 P4D 0 [ 2055.139219] Oops: 0000 [#1] SMP PTI [ 2055.142736] Modules linked in: vhost_net vhost tap tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat ext4 mbcache jbd2 intel_rapl skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc ses aesni_intel ipmi_ssif crypto_simd enclosure cryptd hpwdt glue_helper ioatdma hpilo wmi dca pcspkr ipmi_si acpi_power_meter ipmi_devintf shpchp mei_me ipmi_msghandler mei lpc_ich sch_fq_codel ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm i40e smartpqi tg3 scsi_transport_sas crc32c_intel i2c_core ptp pps_core [ 2055.206142] CPU: 6 PID: 1693 Comm: vhost-1683 Tainted: G W 4.17.0-rc5-fix-tun+ #1 [ 2055.215011] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 11/14/2017 [ 2055.223617] RIP: 0010:__xdp_map_lookup_elem+0x5/0x30 [ 2055.228624] RSP: 0018:ffff998b07607cc0 EFLAGS: 00010246 [ 2055.233892] RAX: ffff8dbd8e235700 RBX: ffff8dbd8ff21c40 RCX: 0000000000000004 [ 2055.241089] RDX: ffff998b097a9000 RSI: 0000000000000000 RDI: 0000000000000000 [ 2055.248286] RBP: 0000000000000000 R08: 00000000000065a8 R09: 0000000000005d80 [ 2055.255483] R10: 0000000000000040 R11: ffff8dbcf0100000 R12: ffff998b097a9000 [ 2055.262681] R13: ffff8dbd8c98c000 R14: 0000000000000000 R15: ffff998b07607d78 [ 2055.269879] FS: 0000000000000000(0000) GS:ffff8dbd8ff00000(0000) knlGS:0000000000000000 [ 2055.278039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2055.283834] CR2: 0000000000000018 CR3: 0000000c0c8cc005 CR4: 00000000007626e0 [ 2055.291030] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2055.298227] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2055.305424] PKRU: 55555554 [ 2055.308153] Call Trace: [ 2055.310624] xdp_do_redirect+0x7b/0x380 [ 2055.314499] tun_get_user+0x10fe/0x12a0 [tun] [ 2055.318895] tun_sendmsg+0x52/0x70 [tun] [ 2055.322852] handle_tx+0x2ad/0x5f0 [vhost_net] [ 2055.327337] vhost_worker+0xa5/0x100 [vhost] [ 2055.331646] kthread+0xf5/0x130 [ 2055.334813] ? vhost_dev_ioctl+0x3b0/0x3b0 [vhost] [ 2055.339646] ? kthread_bind+0x10/0x10 [ 2055.343343] ret_from_fork+0x35/0x40 [ 2055.346950] Code: 0e 74 15 83 f8 10 75 05 e9 e9 aa b3 ff f3 c3 0f 1f 80 00 00 00 00 f3 c3 e9 c9 9d b3 ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 <8b> 47 18 83 f8 0e 74 0d 83 f8 10 75 05 e9 e9 a9 b3 ff 31 c0 c3 [ 2055.366004] RIP: __xdp_map_lookup_elem+0x5/0x30 RSP: ffff998b07607cc0 [ 2055.372500] CR2: 0000000000000018 [ 2055.375856] ---[ end trace 2a2dcc5e9e174268 ]--- [ 2055.523626] Kernel panic - not syncing: Fatal exception [ 2055.529796] Kernel Offset: 0x2e000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 2055.677539] ---[ end Kernel panic - not syncing: Fatal exception ]--- v2: - Removed preempt_disable/enable since local_bh_disable will prevent preemption as well, feedback from Jason Wang. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Toshiaki Makita <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29be2net: Fix error detection logic for BE3Suresh Reddy1-1/+3
Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0) in be_detect_error() to know whether the error is valid error or not Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3") Signed-off-by: Suresh Reddy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29net: qmi_wwan: Add Netgear Aircard 779SJosh Hill1-0/+1
Add support for Netgear Aircard 779S Signed-off-by: Josh Hill <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29mlxsw: pci: Utilize MRSR register to perform FW resetJiri Pirko3-74/+62
So far, the PCI BAR0 register is used for triggering FW reset. However, that is a legacy attitude and it is recommended to use MRSR to perform reset instead. So do that. Move the reset into init() function as the cmd interface needs to be used. With that, IRQ initialization needs to be moved as well. As a side effect, the reset move simplifies the devlink reload flow. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29mlxsw: cmd: Handle error after reset gracefullyJiri Pirko2-12/+30
There is an exception in command interface processing in case the MRSR register is written to. The register triggers FW reset and during the reset FW returns an error. So handle this by ignoring this error while writing to MRSR register. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29mlxsw: reg: Add Management Reset and Shutdown RegisterJiri Pirko1-0/+25
Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAGPetr Machata1-0/+5
VLAN 1 is internally used for untagged traffic. Prevent creation of explicit netdevice for that VLAN, because that currently isn't supported and leads to the NULL pointer dereference cited below. Fix by preventing creation of VLAN devices with VID of 1 over mlxsw devices or LAG devices that involve mlxsw devices. [ 327.175816] ================================================================================ [ 327.184544] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c:200:12 [ 327.193667] member access within null pointer of type 'const struct mlxsw_sp_fid' [ 327.201226] CPU: 0 PID: 8983 Comm: ip Not tainted 4.17.0-rc4-petrm_net_ip6gre_headroom-custom-140 #11 [ 327.210496] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 327.219872] Call Trace: [ 327.222384] dump_stack+0xc3/0x12b [ 327.234007] ubsan_epilogue+0x9/0x49 [ 327.237638] ubsan_type_mismatch_common+0x1f9/0x2d0 [ 327.255769] __ubsan_handle_type_mismatch+0x90/0xa7 [ 327.264716] mlxsw_sp_fid_type+0x35/0x50 [mlxsw_spectrum] [ 327.270255] mlxsw_sp_port_vlan_router_leave+0x46/0xc0 [mlxsw_spectrum] [ 327.277019] mlxsw_sp_inetaddr_port_vlan_event+0xe1/0x340 [mlxsw_spectrum] [ 327.315031] mlxsw_sp_netdevice_vrf_event+0xa8/0x100 [mlxsw_spectrum] [ 327.321626] mlxsw_sp_netdevice_event+0x276/0x430 [mlxsw_spectrum] [ 327.367863] notifier_call_chain+0x4c/0x150 [ 327.372128] __netdev_upper_dev_link+0x1b3/0x260 [ 327.399450] vrf_add_slave+0xce/0x170 [vrf] [ 327.403703] do_setlink+0x658/0x1d70 [ 327.508998] rtnl_newlink+0x908/0xf20 [ 327.559128] rtnetlink_rcv_msg+0x50c/0x720 [ 327.571720] netlink_rcv_skb+0x16a/0x1f0 [ 327.583450] netlink_unicast+0x2ca/0x3e0 [ 327.599305] netlink_sendmsg+0x3e2/0x7f0 [ 327.616655] sock_sendmsg+0x76/0xc0 [ 327.620207] ___sys_sendmsg+0x494/0x5d0 [ 327.666117] __sys_sendmsg+0xc2/0x130 [ 327.690953] do_syscall_64+0x66/0x370 [ 327.694677] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 327.699782] RIP: 0033:0x7f4c2f3f8037 [ 327.703393] RSP: 002b:00007ffe8c389708 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 327.711035] RAX: ffffffffffffffda RBX: 000000005b03f53e RCX: 00007f4c2f3f8037 [ 327.718229] RDX: 0000000000000000 RSI: 00007ffe8c389760 RDI: 0000000000000003 [ 327.725431] RBP: 00007ffe8c389760 R08: 0000000000000000 R09: 00007f4c2f443630 [ 327.732632] R10: 00000000000005eb R11: 0000000000000246 R12: 0000000000000000 [ 327.739833] R13: 00000000006774e0 R14: 00007ffe8c3897e8 R15: 0000000000000000 [ 327.747096] ================================================================================ Fixes: 9589a7b5d7d9 ("mlxsw: spectrum: Handle VLAN devices linking / unlinking") Suggested-by: Ido Schimmel <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29net: qcom/emac: fix device tree initializationTimur Tabi1-3/+13
Commit "net: qcom/emac: Encapsulate sgmii ops under one structure" introduced the sgmii_ops structure, but did not correctly initialize it on device tree platforms. This resulted in compiler warnings when ACPI is not enabled. Reported-by: Arnd Bergmann <[email protected]> Signed-off-by: Timur Tabi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29net/mlx5e: fix TLS dependencyArnd Bergmann1-0/+1
With CONFIG_TLS=m and MLX5_CORE_EN=y, we get a link failure: drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_ooo': tls_rxtx.c:(.text+0x24c): undefined reference to `tls_get_record' drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_rxtx.o: In function `mlx5e_tls_handle_tx_skb': tls_rxtx.c:(.text+0x9a8): undefined reference to `tls_device_sk_destruct' This narrows down the dependency to only allow the configurations that will actually work. The existing dependency on TLS_DEVICE is not sufficient here since MLX5_EN_TLS is a 'bool' symbol. Fixes: c83294b9efa5 ("net/mlx5e: TLS, Add Innova TLS TX support") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Saeed Mahameed <[email protected]> Acked-by: Boris Pismenny <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29net: remove unnecessary genlmsg_cancel() callsYueHaibing2-3/+0
the message be freed immediately, no need to trim it back to the previous size. Inspired by commit 7a9b3ec1e19f ("nl80211: remove unnecessary genlmsg_cancel() calls") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: abm: report correct MQ statsJakub Kicinski1-0/+24
Report the stat diff to make sure MQ stats add up to child stats. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: abm: multi-queue RED offloadJakub Kicinski3-48/+208
Add support for MQ offload and setting RED parameters on queue-by-queue basis. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: abm: expose all PF queuesJakub Kicinski3-6/+16
Allocate the PF representor as multi-queue to allow setting the configuration per-queue. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: abm: expose the internal stats in ethtoolJakub Kicinski3-0/+75
There is a handful of statistics exposing some internal details of the implementation. Expose those via ethtool. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: allow apps to add extra stats to portsJakub Kicinski4-2/+45
Allow nfp apps to add extra ethtool stats. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: abm: report statistics from RED offloadJakub Kicinski3-0/+244
Report basic and extended RED statistics back to TC. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: abm: add simple RED offloadJakub Kicinski2-0/+92
Offload simple RED configurations. For now support only DCTCP like scenarios where min and max are the same. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: abm: add helpers for configuring queue marking levelsJakub Kicinski3-0/+88
Queue levels for simple ECN marking are stored in _abi_nfd_out_q_lvls_X symbol, where X is the PCIe PF id. Find out the location of that symbol and add helpers for modifying it. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: abm: enable advanced queuing on demandJakub Kicinski4-0/+40
ABM NIC FW has a cut-through mode where the PCIe queuing is bypassed, thus working like our standard NIC FWs. Use this mode by default and only enable queuing in switchdev mode where users can configure it. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Dirk van der Merwe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29nfp: prefix vNIC phys_port_name with 'n'Jakub Kicinski1-1/+1
Some drivers are using a bare number inside phys_port_name as VF id and OpenStack's regexps will pick it up. We can't use a bare number for your vNICs, prefix the names with 'n'. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.