aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-06-29stmmac: intel: set PCI_D3hot in suspendVoon Weifeng1-0/+1
During suspend, set the Intel mgbe to D3hot state to save power consumption. Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: Ling Pei Lee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29stmmac: intel: Enable PHY WOL option in EHLLing Pei Lee1-0/+1
Enable PHY Wake On LAN in Intel EHL Intel platform. PHY Wake on LAN option is enabled due to Intel EHL Intel platform is designed for PHY Wake On LAN but not MAC Wake On LAN. Signed-off-by: Ling Pei Lee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29net: stmmac: option to enable PHY WOL with PMT enabledLing Pei Lee1-1/+2
The current stmmac driver WOL implementation will enable MAC WOL if MAC HW PMT feature is on. Else, the driver will check for PHY WOL support. There is another case where MAC HW PMT is enabled but the platform still goes for the PHY WOL option. E.g, Intel platform are designed for PHY WOL but not MAC WOL although HW MAC PMT features are enabled. Introduce use_phy_wol platform data to select PHY WOL instead of depending on HW PMT features. Set use_phy_wol will disable the plat->pmt which currently used to determine the system to wake up by MAC WOL or PHY WOL. Signed-off-by: Ling Pei Lee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29net: sock: introduce sk_error_reportAlexander Aring1-1/+1
This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29Merge tag 'hyperv-next-signed-20210629' of ↵Linus Torvalds3-3/+18
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: "Just a few minor enhancement patches and bug fixes" * tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv() Drivers: hv: Move Hyper-V extended capability check to arch neutral code drivers: hv: Fix missing error code in vmbus_connect() x86/hyperv: fix logical processor creation hv_utils: Fix passing zero to 'PTR_ERR' warning scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer hv_balloon: Remove redundant assignment to region_start
2021-06-29net/mlx4: Fix fall-through warning for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]>
2021-06-28Merge tag 'fallthrough-fixes-clang-5.14-rc1' of ↵Linus Torvalds6-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo Silva: "Fix many fall-through warnings when building with Clang 12.0.0 and '-Wimplicit-fallthrough' so that we at some point will be able to enable that warning by default" * tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits) rxrpc: Fix fall-through warnings for Clang drm/nouveau/clk: Fix fall-through warnings for Clang drm/nouveau/therm: Fix fall-through warnings for Clang drm/nouveau: Fix fall-through warnings for Clang xfs: Fix fall-through warnings for Clang xfrm: Fix fall-through warnings for Clang tipc: Fix fall-through warnings for Clang sctp: Fix fall-through warnings for Clang rds: Fix fall-through warnings for Clang net/packet: Fix fall-through warnings for Clang net: netrom: Fix fall-through warnings for Clang ide: Fix fall-through warnings for Clang hwmon: (max6621) Fix fall-through warnings for Clang hwmon: (corsair-cpro) Fix fall-through warnings for Clang firewire: core: Fix fall-through warnings for Clang braille_console: Fix fall-through warnings for Clang ipv4: Fix fall-through warnings for Clang qlcnic: Fix fall-through warnings for Clang bnxt_en: Fix fall-through warnings for Clang netxen_nic: Fix fall-through warnings for Clang ...
2021-06-28net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()Nathan Chancellor1-4/+1
Clang warns: drivers/net/ethernet/microchip/sparx5/sparx5_main.c:760:29: warning: variable 'mac_addr' is uninitialized when used here [-Wuninitialized] if (of_get_mac_address(np, mac_addr)) { ^~~~~~~~ drivers/net/ethernet/microchip/sparx5/sparx5_main.c:669:14: note: initialize the variable 'mac_addr' to silence this warning u8 *mac_addr; ^ = NULL 1 warning generated. mac_addr is only used to store the value retrieved from of_get_mac_address(), which is then copied into the base_mac member of the sparx5 struct using ether_addr_copy(). It is easier to just use the base_mac address directly, which avoids the warning and the extra copy. Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1413 Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: dsa: sja1105: fix dynamic access to L2 Address Lookup table for SJA1110Vladimir Oltean1-4/+22
The SJA1105P/Q/R/S and SJA1110 may have the same layout for the command to read/write/search for L2 Address Lookup entries, but as explained in the comments at the beginning of the sja1105_dynamic_config.c file, the command portion of the buffer is at the end, and we need to obtain a pointer to it by adding the length of the entry to the buffer. Alas, the length of an L2 Address Lookup entry is larger in SJA1110 than it is for SJA1105P/Q/R/S, so we need to create a common helper to access the command buffer, and this receives as argument the length of the entry buffer. Fixes: 3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: phy: at803x: mask 1000 Base-X link modeDavid Bauer1-1/+29
AR8031/AR8033 have different status registers for copper and fiber operation. However, the extended status register is the same for both operation modes. As a result of that, ESTATUS_1000_XFULL is set to 1 even when operating in copper TP mode. Remove this mode from the supported link modes, as this driver currently only supports copper operation. Signed-off-by: David Bauer <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller23-90/+12
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 12 day(s) which contain a total of 56 files changed, 394 insertions(+), 380 deletions(-). The main changes are: 1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney. 2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski. 3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev. 4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria. 5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards. 6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa. 7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi. 8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim. 9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young. 10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer. 11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski. 12) Fix up bpfilter startup log-level to info level, from Gary Lin. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: sparx5: fix error return code in sparx5_register_notifier_blocks()Yang Yingliang1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: d6fce5141929 ("net: sparx5: add switching support") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: sparx5: fix return value check in sparx5_create_targets()Yang Yingliang1-2/+2
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: sparx5: check return value after calling platform_get_resource()Yang Yingliang1-0/+4
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28Merge tag 'mlx5-updates-2021-06-26' of ↵David S. Miller13-16/+147
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-06-26 This series provides small updates to mlx5 driver. 1) Increase hairpin buffer size 2) Improve peroformance in SF allocation 3) Add IPsec support to uplink representor 4) Add stats for number of deleted kTLS TX offloaded connections 5) Add support for flow sampler in SW steering ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: bridge: allow the switchdev replay functions to be called for deletionVladimir Oltean1-2/+2
When a switchdev port leaves a LAG that is a bridge port, the switchdev objects and port attributes offloaded to that port are not removed: ip link add br0 type bridge ip link add bond0 type bond mode 802.3ad ip link set swp0 master bond0 ip link set bond0 master br0 bridge vlan add dev bond0 vid 100 ip link set swp0 nomaster VLAN 100 will remain installed on swp0 despite it going into standalone mode, because as far as the bridge is concerned, nothing ever happened to its bridge port. Let's extend the bridge vlan, fdb and mdb replay functions to take a 'bool adding' argument, and make DSA and ocelot call the replay functions with 'adding' as false from the switchdev unsync path, for the switch port that leaves the bridge. Note that this patch in itself does not salvage anything, because in the current pull mode of operation, DSA still needs to call the replay helpers with adding=false. This will be done in another patch. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: bridge: ignore switchdev events for LAG ports which didn't request replayVladimir Oltean1-2/+17
There is a slight inconvenience in the switchdev replay helpers added recently, and this is when: ip link add br0 type bridge ip link add bond0 type bond ip link set bond0 master br0 bridge vlan add dev bond0 vid 100 ip link set swp0 master bond0 ip link set swp1 master bond0 Since the underlying driver (currently only DSA) asks for a replay of VLANs when swp0 and swp1 join the LAG because it is bridged, what will happen is that DSA will try to react twice on the VLAN event for swp0. This is not really a huge problem right now, because most drivers accept duplicates since the bridge itself does, but it will become a problem when we add support for replaying switchdev object deletions. Let's fix this by adding a blank void *ctx in the replay helpers, which will be passed on by the bridge in the switchdev notifications. If the context is NULL, everything is the same as before. But if the context is populated with a valid pointer, the underlying switchdev driver (currently DSA) can use the pointer to 'see through' the bridge port (which in the example above is bond0) and 'know' that the event is only for a particular physical port offloading that bridge port, and not for all of them. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: switchdev: add a context void pointer to struct switchdev_notifier_infoVladimir Oltean8-17/+20
In the case where the driver asks for a replay of a certain type of event (port object or attribute) for a bridge port that is a LAG, it may do so because this port has just joined the LAG. But there might already be other switchdev ports in that LAG, and it is preferable that those preexisting switchdev ports do not act upon the replayed event. The solution is to add a context to switchdev events, which is NULL most of the time (when the bridge layer initiates the call) but which can be set to a value controlled by the switchdev driver when a replay is requested. The driver can then check the context to figure out if all ports within the LAG should act upon the switchdev event, or just the ones that match the context. We have to modify all switchdev_handle_* helper functions as well as the prototypes in the drivers that use these helpers too, because these helpers hide the underlying struct switchdev_notifier_info from us and there is no way to retrieve the context otherwise. The context structure will be populated and used in later patches. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: ocelot: delete call to br_fdb_replayVladimir Oltean1-4/+0
Not using this driver, I did not realize it doesn't react to SWITCHDEV_FDB_{ADD,DEL}_TO_DEVICE notifications, but it implements just the bridge bypass operations (.ndo_fdb_{add,del}). So the call to br_fdb_replay just produces notifications that are ignored, delete it for now. Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28bnxt_en: Enable hardware PTP supportMichael Chan1-0/+7
Call bnxt_ptp_init() to initialize and register with the clock driver to enable PTP support. Call bnxt_ptp_free() to unregister and clean up during shutdown. Reviewed-by: Edwin Peer <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28bnxt_en: Transmit and retrieve packet timestampsPavan Chebbi4-5/+131
Setup the TXBD to enable TX timestamp if requested. At TX packet DMA completion, if we requested TX timestamp on that packet, we defer to .do_aux_work() to obtain the TX timestamp from the firmware before we free the TX SKB. v2: Use .do_aux_work() to get the TX timestamp from firmware. Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28bnxt_en: Get the RX packet timestampPavan Chebbi4-3/+52
If the RX packet is timestamped by the hardware, the RX completion record will contain the lower 32-bit of the timestamp. This needs to be combined with the upper 16-bit of the periodic timestamp that we get from the timer. The previous snapshot in ptp->old_timer is used to make sure that the snapshot is not ahead of the RX timestamp and we adjust for wrap-around if needed. v2: Make ptp->old_time read access safe on 32-bit CPUs. Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28bnxt_en: Get the full 48-bit hardware timestamp periodicallyPavan Chebbi3-0/+41
From the bnxt_timer(), read the 48-bit hardware running clock periodically and store it in ptp->current_time. The previous snapshot of the clock will be stored in ptp->old_time. The old_time snapshot will be used in the next patches to compute the RX packet timestamps. v2: Use .do_aux_work() to read the timer periodically. Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28bnxt_en: Add PTP clock APIs, ioctls, and ethtool methodsMichael Chan6-1/+382
Add the clock APIs to set/get/adjust the hw clock, and the related ioctls and ethtool methods. v2: Propagate error code from ptp_clock_register(). Add spinlock to serialize access to the timecounter. The timecounter is accessed in process context and the RX datapath. Read the PHC using direct registers. Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28bnxt_en: Get PTP hardware capability from firmwareMichael Chan3-0/+113
Store PTP hardware info in a structure if hardware and firmware support PTP. Reviewed-by: Edwin Peer <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28bnxt_en: Update firmware interface to 1.10.2.47Michael Chan2-42/+629
Adding the PTP related firmware interface is the main change. There is also a name change for admin_mtu, requiring code fixup. Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: hns3: add support for dumping MAC umv counter in debugfsJian Shen3-0/+42
This patch adds support of dumping MAC umv counter in debugfs, which will be helpful for debugging. The display style is below: $ cat umv_info num_alloc_vport : 2 max_umv_size : 256 wanted_umv_size : 256 priv_umv_size : 85 share_umv_size : 86 vport(0) used_umv_num : 1 vport(1) used_umv_num : 1 Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: hns3: add support for FD counter in debugfsJian Shen5-2/+62
Previously, the flow director counter is not enabled. To improve the maintainability for chechking whether flow director hit or not, enable flow director counter for each function, and add debugfs query inerface to query the counters for each function. The debugfs command is below: cat fd_counter func_id hit_times pf 0 vf0 0 vf1 0 Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28Merge tag 'mac80211-next-for-net-next-2021-06-25' of ↵David S. Miller5-20/+48
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes berg says: ==================== Lots of changes: * aggregation handling improvements for some drivers * hidden AP discovery on 6 GHz and other HE 6 GHz improvements * minstrel improvements for no-ack frames * deferred rate control for TXQs to improve reaction times * virtual time-based airtime scheduler * along with various little cleanups/fixups ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-28gtp: reset mac_header after decapGuillaume Nault1-0/+1
For consistency with other L3 tunnel devices, reset the mac_header pointer after decapsulation. This makes the mac_header 0 bytes long, thus making it clear that this skb has no mac_header. Compile tested only. Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28bareudp: allow redirecting bareudp packets to eth devicesGuillaume Nault1-0/+1
Even though bareudp transports L3 data (typically IP or MPLS), it needs to reset the mac_header pointer, so that other parts of the stack don't mistakenly access the outer header after the packet has been decapsulated. This allows to push an Ethernet header to bareudp packets and redirect them to an Ethernet device: $ tc filter add dev bareudp0 ingress matchall \ action vlan push_eth dst_mac 00:00:5e:00:53:01 \ src_mac 00:00:5e:00:53:00 \ action mirred egress redirect dev eth0 Without this patch, push_eth refuses to add an ethernet header because the skb appears to already have a MAC header. Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28Merge tag 'sched-core-2021-06-28' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler udpates from Ingo Molnar: - Changes to core scheduling facilities: - Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables coordinated scheduling across SMT siblings. This is a much requested feature for cloud computing platforms, to allow the flexible utilization of SMT siblings, without exposing untrusted domains to information leaks & side channels, plus to ensure more deterministic computing performance on SMT systems used by heterogenous workloads. There are new prctls to set core scheduling groups, which allows more flexible management of workloads that can share siblings. - Fix task->state access anti-patterns that may result in missed wakeups and rename it to ->__state in the process to catch new abuses. - Load-balancing changes: - Tweak newidle_balance for fair-sched, to improve 'memcache'-like workloads. - "Age" (decay) average idle time, to better track & improve workloads such as 'tbench'. - Fix & improve energy-aware (EAS) balancing logic & metrics. - Fix & improve the uclamp metrics. - Fix task migration (taskset) corner case on !CONFIG_CPUSET. - Fix RT and deadline utilization tracking across policy changes - Introduce a "burstable" CFS controller via cgroups, which allows bursty CPU-bound workloads to borrow a bit against their future quota to improve overall latencies & batching. Can be tweaked via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us. - Rework assymetric topology/capacity detection & handling. - Scheduler statistics & tooling: - Disable delayacct by default, but add a sysctl to enable it at runtime if tooling needs it. Use static keys and other optimizations to make it more palatable. - Use sched_clock() in delayacct, instead of ktime_get_ns(). - Misc cleanups and fixes. * tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/doc: Update the CPU capacity asymmetry bits sched/topology: Rework CPU capacity asymmetry detection sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag psi: Fix race between psi_trigger_create/destroy sched/fair: Introduce the burstable CFS controller sched/uclamp: Fix uclamp_tg_restrict() sched/rt: Fix Deadline utilization tracking during policy change sched/rt: Fix RT utilization tracking during policy change sched: Change task_struct::state sched,arch: Remove unused TASK_STATE offsets sched,timer: Use __set_current_state() sched: Add get_current_state() sched,perf,kvm: Fix preemption condition sched: Introduce task_is_running() sched: Unbreak wakeups sched/fair: Age the average idle time sched/cpufreq: Consider reduced CPU capacity in energy calculation sched/fair: Take thermal pressure into account while estimating energy thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure sched/fair: Return early from update_tg_cfs_load() if delta == 0 ...
2021-06-26net/mlx5e: Add IPsec support to uplink representorRaed Salem2-1/+8
Add the xfrm xdo and ipsec_init/cleanup to uplink representor to support IPsec in SRIOV switchdev mode. Signed-off-by: Raed Salem <[email protected]> Signed-off-by: Huy Nguyen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-26net/mlx5e: kTLS, Add stats for number of deleted kTLS TX offloaded connectionsTariq Toukan3-0/+3
Expose ethtool SW counter for the number of kTLS device-offloaded TX connections that are finished and deleted. Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-26net/mlx5: SF, Improve performance in SF allocationEli Cohen1-10/+13
Avoid second traversal on the SF table by recording the first free entry and using it in case the looked up entry was not found in the table. Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-26net/mlx5: Increase hairpin buffer sizeAriel Levkovich1-1/+1
The max packet size a hairpin queue is able to handle is determined by the total hairpin buffer size divided by 4. Currently the buffer size is set to 32KB which makes the max packet size to be 8KB and doesn't support jumbo frames of size 9KB. This change increases the buffer size to 64KB to increase the max frame size and support 9KB frames. Signed-off-by: Ariel Levkovich <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-26net/mlx5: DR, Add support for flow sampler offloadYevgeny Kliteynik5-3/+119
Add SW steering support for sFlow / flow sampler action. Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-26net/mlx5: Compare sampler flow destination ID in fs_coreYevgeny Kliteynik1-1/+3
When comparing sampler flow destinations, in fs_core, consider sampler ID as well. Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-06-25Merge branch '100GbE' of ↵David S. Miller9-5/+641
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-06-25 This series contains updates to ice driver only. Jesse adds support for tracepoints to aide in debugging. Maciej adds support for PTP auxiliary pin support. Victor removes the VSI info from the old aggregator when moving the VSI to another aggregator. Tony removes an unnecessary VSI assignment. Christophe Jaillet fixes a memory leak for failed allocation in ice_pf_dcb_cfg(). ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-25Merge tag 'wireless-drivers-next-2021-06-25' of ↵David S. Miller144-3064/+5549
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.14 Second, and most likely the last, set of patches for v5.14. mt76 and iwlwifi have most patches in this round, but rtw88 also has some new features. Nothing special really standing out. mt76 * mt7915 MSI support * disable ASPM on mt7915 * mt7915 tx status reporting * mt7921 decap offload rtw88 * beacon filter support * path diversity support * firmware crash information via devcoredump * quirks for disabling pci capabilities mt7601u * add USB ID for a XiaoDu WiFi Dongle ath11k * enable support for QCN9074 PCI devices brcmfmac * support parse country code map from DeviceTree iwlwifi * support for new hardware * support for BIOS control of 11ax enablement in Russia * support UNII4 band enablement from BIOS ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-25net: mdiobus: withdraw fwnode_mdbiobus_registerMarcin Wojtas4-27/+20
The newly implemented fwnode_mdbiobus_register turned out to be problematic - in case the fwnode_/of_/acpi_mdio are built as modules, a dependency cycle can be observed during the depmod phase of modules_install, eg.: depmod: ERROR: Cycle detected: fwnode_mdio -> of_mdio -> fwnode_mdio depmod: ERROR: Found 2 modules in dependency cycles! OR: depmod: ERROR: Cycle detected: acpi_mdio -> fwnode_mdio -> acpi_mdio depmod: ERROR: Found 2 modules in dependency cycles! A possible solution could be to rework fwnode_mdiobus_register, so that to merge the contents of acpi_mdiobus_register and of_mdiobus_register. However feasible, such change would be very intrusive and affect huge amount of the of_mdiobus_register users. Since there are currently 2 users of ACPI and MDIO (xgmac_mdio and mvmdio), withdraw the fwnode_mdbiobus_register and roll back to a simple 'if' condition in affected drivers. Fixes: 62a6ef6a996f ("net: mdiobus: Introduce fwnode_mdbiobus_register()") Signed-off-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-25Revert "be2net: disable bh with spin_lock in be_process_mcc"Petr Oros2-2/+6
Patch was based on wrong presumption that be_poll can be called only from bh context. It reintroducing old regression (also reverted) and causing deadlock when we use netconsole with benet in bonding. Old revert: commit 072a9c486004 ("netpoll: revert 6bdb7fe3104 and fix be_poll() instead") [ 331.269715] bond0: (slave enp0s7f0): Releasing backup interface [ 331.270121] CPU: 4 PID: 1479 Comm: ifenslave Not tainted 5.13.0-rc7+ #2 [ 331.270122] Call Trace: [ 331.270122] [c00000001789f200] [c0000000008c505c] dump_stack+0x100/0x174 (unreliable) [ 331.270124] [c00000001789f240] [c008000001238b9c] be_poll+0x64/0xe90 [be2net] [ 331.270125] [c00000001789f330] [c000000000d1e6e4] netpoll_poll_dev+0x174/0x3d0 [ 331.270127] [c00000001789f400] [c008000001bc167c] bond_poll_controller+0xb4/0x130 [bonding] [ 331.270128] [c00000001789f450] [c000000000d1e624] netpoll_poll_dev+0xb4/0x3d0 [ 331.270129] [c00000001789f520] [c000000000d1ed88] netpoll_send_skb+0x448/0x470 [ 331.270130] [c00000001789f5d0] [c0080000011f14f8] write_msg+0x180/0x1b0 [netconsole] [ 331.270131] [c00000001789f640] [c000000000230c0c] console_unlock+0x54c/0x790 [ 331.270132] [c00000001789f7b0] [c000000000233098] vprintk_emit+0x2d8/0x450 [ 331.270133] [c00000001789f810] [c000000000234758] vprintk+0xc8/0x270 [ 331.270134] [c00000001789f850] [c000000000233c28] printk+0x40/0x54 [ 331.270135] [c00000001789f870] [c000000000ccf908] __netdev_printk+0x150/0x198 [ 331.270136] [c00000001789f910] [c000000000ccfdb4] netdev_info+0x68/0x94 [ 331.270137] [c00000001789f950] [c008000001bcbd70] __bond_release_one+0x188/0x6b0 [bonding] [ 331.270138] [c00000001789faa0] [c008000001bcc6f4] bond_do_ioctl+0x42c/0x490 [bonding] [ 331.270139] [c00000001789fb60] [c000000000d0d17c] dev_ifsioc+0x17c/0x400 [ 331.270140] [c00000001789fbc0] [c000000000d0db70] dev_ioctl+0x390/0x890 [ 331.270141] [c00000001789fc10] [c000000000c7c76c] sock_do_ioctl+0xac/0x1b0 [ 331.270142] [c00000001789fc90] [c000000000c7ffac] sock_ioctl+0x31c/0x6e0 [ 331.270143] [c00000001789fd60] [c0000000005b9728] sys_ioctl+0xf8/0x150 [ 331.270145] [c00000001789fdb0] [c0000000000336c0] system_call_exception+0x160/0x2f0 [ 331.270146] [c00000001789fe10] [c00000000000d35c] system_call_common+0xec/0x278 [ 331.270147] --- interrupt: c00 at 0x7fffa6c6ec00 [ 331.270147] NIP: 00007fffa6c6ec00 LR: 0000000105c4185c CTR: 0000000000000000 [ 331.270148] REGS: c00000001789fe80 TRAP: 0c00 Not tainted (5.13.0-rc7+) [ 331.270148] MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 28000428 XER: 00000000 [ 331.270155] IRQMASK: 0 [ 331.270156] GPR00: 0000000000000036 00007fffd494d5b0 00007fffa6d57100 0000000000000003 [ 331.270158] GPR04: 0000000000008991 00007fffd494d6d0 0000000000000008 00007fffd494f28c [ 331.270161] GPR08: 0000000000000003 0000000000000000 0000000000000000 0000000000000000 [ 331.270164] GPR12: 0000000000000000 00007fffa6dfa220 0000000000000000 0000000000000000 [ 331.270167] GPR16: 0000000105c44880 0000000000000000 0000000105c60088 0000000105c60318 [ 331.270170] GPR20: 0000000105c602c0 0000000105c44560 0000000000000000 0000000000000000 [ 331.270172] GPR24: 00007fffd494dc50 00007fffd494d6a8 0000000105c60008 00007fffd494d6d0 [ 331.270175] GPR28: 00007fffd494f27e 0000000105c6026c 00007fffd494f284 0000000000000000 [ 331.270178] NIP [00007fffa6c6ec00] 0x7fffa6c6ec00 [ 331.270178] LR [0000000105c4185c] 0x105c4185c [ 331.270179] --- interrupt: c00 This reverts commit d0d006a43e9a7a796f6f178839c92fcc222c564d. Fixes: d0d006a43e9a7a ("be2net: disable bh with spin_lock in be_process_mcc") Signed-off-by: Petr Oros <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-25ice: Fix a memory leak in an error handling path in 'ice_pf_dcb_cfg()'Christophe JAILLET1-2/+4
If this 'kzalloc()' fails we must free some resources as in all the other error handling paths of this function. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-25ice: remove unnecessary VSI assignmentTony Nguyen1-1/+0
ice_get_vf_vsi() is being called twice for the same VSI. Remove the unnecessary call/assignment. Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Tony Brelinski <[email protected]>
2021-06-25ice: remove the VSI info from previous aggVictor Raj1-2/+22
Remove the VSI info from previous aggregator after moving the VSI to a new aggregator. Signed-off-by: Victor Raj <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-25ice: add support for auxiliary input/output pinsMaciej Machnikowski4-0/+366
The E810 device supports programmable pins for enabling both input and output events related to the PTP hardware clock. This includes both output signals with programmable period, as well as timestamping of events on input pins. Add support for enabling these using the CONFIG_PTP_1588_CLOCK interface. This allows programming the software defined pins to take advantage of the hardware clock features. Signed-off-by: Maciej Machnikowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-25gve: Fix swapped vars when fetching max queuesBailey Forrest1-2/+2
Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: Bailey Forrest <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-25Add Mellanox BlueField Gigabit Ethernet driverDavid Thompson13-0/+2028
This patch adds build and driver logic for the "mlxbf_gige" Ethernet driver from Mellanox Technologies. The second generation BlueField SoC from Mellanox supports an out-of-band GigaBit Ethernet management port to the Arm subsystem. This driver supports TCP/IP network connectivity for that port, and provides back-end routines to handle basic ethtool requests. The driver interfaces to the Gigabit Ethernet block of BlueField SoC via MMIO accesses to registers, which contain control information or pointers describing transmit and receive resources. There is a single transmit queue, and the port supports transmit ring sizes of 4 to 256 entries. There is a single receive queue, and the port supports receive ring sizes of 32 to 32K entries. The transmit and receive rings are allocated from DMA coherent memory. There is a 16-bit producer and consumer index per ring to denote software ownership and hardware ownership, respectively. The main driver logic such as probe(), remove(), and netdev ops are in "mlxbf_gige_main.c". Logic in "mlxbf_gige_rx.c" and "mlxbf_gige_tx.c" handles the packet processing for receive and transmit respectively. The logic in "mlxbf_gige_ethtool.c" supports the handling of some basic ethtool requests: get driver info, get ring parameters, get registers, and get statistics. The logic in "mlxbf_gige_mdio.c" is the driver controlling the Mellanox BlueField hardware that interacts with a PHY device via MDIO/MDC pins. This driver does the following: - At driver probe time, it configures several BlueField MDIO parameters such as sample rate, full drive, voltage and MDC - It defines functions to read and write MDIO registers and registers the MDIO bus. - It defines the phy interrupt handler reporting a link up/down status change - This driver's probe is invoked from the main driver logic while the phy interrupt handler is registered in ndo_open. Driver limitations - Only supports 1Gbps speed - Only supports GMII protocol - Supports maximum packet size of 2KB - Does not support scatter-gather buffering Testing - Successful build of kernel for ARM64, ARM32, X86_64 - Tested ARM64 build on FastModels & Palladium - Tested ARM64 build on several Mellanox boards that are built with the BlueField-2 SoC. The testing includes coverage in the areas of networking (e.g. ping, iperf, ifconfig, route), file transfers (e.g. SCP), and various ethtool options relevant to this driver. Signed-off-by: David Thompson <[email protected]> Signed-off-by: Asmaa Mnebhi <[email protected]> Reviewed-by: Liming Sun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-25ice: add tracepointsJesse Brandeburg3-0/+249
This patch is modeled after one by Scott Peterson for i40e. Add tracepoints to the driver, via a new file ice_trace.h and some new trace calls added in interesting places in the driver. Add some tracing for DIMLIB to help debug interrupt moderation problems. Performance should not be affected, and this can be very useful for debugging and adding new trace events to paths in the future. Note eBPF programs can attach to these events, as well as perf can count them since we're attaching to the events subsystem in the kernel. Co-developed-by: Ben Shelton <[email protected]> Signed-off-by: Ben Shelton <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-24net: bcmgenet: Add mdio-bcm-unimac soft dependencyJian-Hong Pan1-0/+1
The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late. So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads GENET fail to attach the PHY as following log: bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 ... could not attach to PHY bcmgenet fd580000.ethernet eth0: failed to connect to PHY uart-pl011 fe201000.serial: no DMA platform data libphy: bcmgenet MII bus: probed ... unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus It is not just coming too late, there is also no way for the module loader to figure out the dependency between GENET and its MDIO bus driver unless we provide this MODULE_SOFTDEP hint. This patch adds the soft dependency to load mdio-bcm-unimac module before genet module to fix this issue. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485 Fixes: 9a4e79697009 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver") Signed-off-by: Jian-Hong Pan <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.