aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-07-23octeontx2-af: Fix uninitialized variables in rvu_switchSubbaraya Sundeep2-7/+10
Get the number of VFs of a PF correctly by calling rvu_get_pf_numvfs in rvu_switch_disable function. Also hwvf is not required hence remove it. Fixes: 23109f8dd06d ("octeontx2-af: Introduce internal packet switching") Reported-by: kernel test robot <[email protected]> Reported-by: Colin Ian King <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23wwan: core: Fix missing RTM_NEWLINK event for default linkLoic Poulain1-0/+2
A wwan link created via the wwan_create_default_link procedure is never notified to the user (RTM_NEWLINK), causing issues with user tools relying on such event to track network links (NetworkManager). This is because the procedure misses a call to rtnl_configure_link(), which sets the link as initialized and notifies the new link (cf proper usage in __rtnl_newlink()). Cc: [email protected] Fixes: ca374290aaad ("wwan: core: support default netdev creation") Suggested-by: Sergey Ryazanov <[email protected]> Signed-off-by: Loic Poulain <[email protected]> Acked-by: Sergey Ryazanov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23net: dsa: mv88e6xxx: silently accept the deletion of VID 0 tooVladimir Oltean1-1/+1
The blamed commit modified the driver to accept the addition of VID 0 without doing anything, but deleting that VID still fails: [ 32.080780] mv88e6085 d0032004.mdio-mii:10 lan8: failed to kill vid 0081/0 Modify mv88e6xxx_port_vlan_leave() to do the same thing as the addition. Fixes: b8b79c414eca ("net: dsa: mv88e6xxx: Fix adding vlan 0") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23octeontx2-af: Remove unnecessary devm_kfreeSunil Goutham1-1/+0
Remove devm_kfree of memory where VLAN entry to RVU PF mapping info is saved. This will be freed anyway at driver exit. Having this could result in warning from devm_kfree() if the memory is not allocated due to errors in rvu_nix_block_init() before nix_setup_txvlan(). Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-23i40e: Fix log TC creation failure when max num of queues is exceededJedrzej Jagielski1-0/+2
Fix missing failed message if driver does not have enough queues to complete TC command. Without this fix no message is displayed in dmesg. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Imam Hassan Reza Biswas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23i40e: Fix queue-to-TC mapping on TxJedrzej Jagielski3-0/+53
In SW DCB mode the packets sent receive incorrect UP tags. They are constructed correctly and put into tx_ring, but UP is later remapped by HW on the basis of TCTUPR register contents according to Tx queue selected, and BW used is consistent with the new UP values. This is caused by Tx queue selection in kernel not taking into account DCB configuration. This patch fixes the issue by implementing the ndo_select_queue NDO callback. Fixes: fd0a05ce74ef ("i40e: transmit, receive, and NAPI") Signed-off-by: Arkadiusz Kubalewski <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Imam Hassan Reza Biswas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23i40e: Add additional info to PHY type errorLukasz Cieplicki1-1/+1
In case of PHY type error occurs, the message was too generic. Add additional info to PHY type error indicating that it can be wrong cable connected. Fixes: 124ed15bf126 ("i40e: Add dual speed module support") Signed-off-by: Lukasz Cieplicki <[email protected]> Signed-off-by: Michal Maloszewski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23i40e: Fix firmware LLDP agent related warningArkadiusz Kubalewski1-0/+4
Make warning meaningful for the user. Previously the trace: "Starting FW LLDP agent failed: error: I40E_ERR_ADMIN_QUEUE_ERROR, I40E_AQ_RC_EAGAIN" was produced when user tried to start Firmware LLDP agent, just after it was stopped with sequence: ethtool --set-priv-flags <dev> disable-fw-lldp on ethtool --set-priv-flags <dev> disable-fw-lldp off (without any delay between the commands) At that point the firmware is still processing stop command, the behavior is expected. Fixes: c1041d070437 ("i40e: Missing response checks in driver when starting/stopping FW LLDP") Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Imam Hassan Reza Biswas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23i40e: Fix logic of disabling queuesArkadiusz Kubalewski1-24/+34
Correct the message flow between driver and firmware when disabling queues. Previously in case of PF reset (due to required reinit after reconfig), the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up occasionally. The error was not a real issue of hardware or firmware, it was caused by wrong sequence of messages invoked by the driver. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Aleksandr Loktionov <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-23virt_wifi: fix error on connectMatteo Croce1-20/+32
When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2021-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds38-120/+629
Pull networking fixes from David Miller: 1) Fix type of bind option flag in af_xdp, from Baruch Siach. 2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao. 3) PM refcnt imbakance in r8152, from Takashi Iwai. 4) Sign extension ug in liquidio, from Colin Ian King. 5) Mising range check in s390 bpf jit, from Colin Ian King. 6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan. 7) Fix skb page recycling race, from Ilias Apalodimas. 8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin. 9) netrom timer sk refcnt issues, from Nguyen Dinh Phi. 10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric Dumazet. 11) act_skbmod should only operate on ethernet packets, from Peilin Ye. 12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo Abeni. 13) Fix sparx5 dependencies, from Yajun Deng. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits) dpaa2-switch: seed the buffer pool after allocating the swp net: sched: cls_api: Fix the the wrong parameter net: sparx5: fix unmet dependencies warning net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum net: dsa: ensure linearized SKBs in case of tail taggers ravb: Remove extra TAB ravb: Fix a typo in comment net: dsa: sja1105: make VID 4095 a bridge VLAN too tcp: disable TFO blackhole logic by default sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set net: ixp46x: fix ptp build failure ibmvnic: Remove the proper scrq flush selftests: net: add ESP-in-UDP PMTU test udp: check encap socket in __udp_lib_err sctp: update active_key for asoc when old key is being replaced r8169: Avoid duplicate sysfs entry creation error ixgbe: Fix packet corruption due to missing DMA sync Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()" ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions fsl/fman: Add fibre support ...
2021-07-22dpaa2-switch: seed the buffer pool after allocating the swpIoana Ciornei1-8/+8
Any interraction with the buffer pool (seeding a buffer, acquire one) is made through a software portal (SWP, a DPIO object). There are circumstances where the dpaa2-switch driver probes on a DPSW before any DPIO devices have been probed. In this case, seeding of the buffer pool will lead to a panic since no SWPs are initialized. To fix this, seed the buffer pool after making sure that the software portals have been probed and are ready to be used. Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface") Signed-off-by: Ioana Ciornei <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-22net: sparx5: fix unmet dependencies warningRandy Dunlap1-0/+1
WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y] Signed-off-by: Randy Dunlap <[email protected]> Cc: Lars Povlsen <[email protected]> Cc: Steen Hegelund <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21ravb: Remove extra TABBiju Das1-1/+1
Align the member description comments for struct ravb_desc by removing the extra TAB. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21ravb: Fix a typo in commentBiju Das1-1/+1
Fix the typo RX->TX in comment, as the code following the comment process TX and not RX. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21net: dsa: sja1105: make VID 4095 a bridge VLAN tooVladimir Oltean1-0/+6
This simple series of commands: ip link add br0 type bridge vlan_filtering 1 ip link set swp0 master br0 fails on sja1105 with the following error: [ 33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN [ 33.447710] sja1105 spi0.1: Invalid config, cannot upload Warning: sja1105: Failed to change VLAN Ethertype. For context, sja1105 has 3 operating modes: - SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware - SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware - SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the bridge_vlans are committed to hardware Swapping out a VLAN list and another in happens in sja1105_build_vlan_table(), which performs a delta update procedure. That function is called from a few places, notably from sja1105_vlan_filtering() which is called from the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler. The above set of 2 commands fails when run on a kernel pre-commit 8841f6e63f2c ("net: dsa: sja1105: make devlink property best_effort_vlan_filtering true by default"). So the priv->vlan_state transition that takes place is between VLAN-unaware and full VLAN filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans are swapped in. So why does it fail? Well, the bridge driver, through nbp_vlan_init(), first sets up the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then proceeds to call nbp_vlan_add for the default_pvid. So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge VLANs (yet). So we have wiped the VLAN table clean, and the low-level static config checker complains of an invalid configuration. We _will_ add the bridge VLANs using the dynamic config interface, albeit later, when nbp_vlan_add() calls us. So it is natural that it fails. So why did it ever work? Surprisingly, it looks like I only tested this configuration with 2 things set up in a particular way: - a network manager that brings all ports up - a kernel with CONFIG_VLAN_8021Q=y It is widely known that commit ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net device that comes up. DSA treats these VLANs as bridge VLANs, and therefore, in my testing, the list of bridge_vlans was never empty. However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily empty, and the sja1105_static_config_reload() call from sja1105_vlan_filtering() will fail. To fix this, the simplest thing is to keep VID 4095, the one used for CPU-injected control packets since commit ed040abca4c1 ("net: dsa: sja1105: use 4095 as the private VLAN for untagged traffic"), in the list of bridge VLANs too, not just the list of tag_8021q VLANs. This ensures that the list of bridge VLANs will never be empty. Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Reported-by: Radu Pirea (NXP OSS) <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21net: ixp46x: fix ptp build failureArnd Bergmann1-0/+2
The rework of the ixp46x cpu detection left the network driver in a half broken state: drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init': drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function) 290 | (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT; | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: note: each undeclared identifier is reported only once for each function it appears in drivers/net/ethernet/xscale/ptp_ixp46x.c: At top level: drivers/net/ethernet/xscale/ptp_ixp46x.c:323:1: error: data definition has no type or storage class [-Werror] 323 | module_init(ptp_ixp_init); I have patches to complete the transition for a future release, but for the moment, add the missing include statements to get it to build again. Fixes: 09aa9aabdcc4 ("soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21ibmvnic: Remove the proper scrq flushSukadev Bhattiprolu1-1/+1
Commit 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") intended to remove the call to ibmvnic_tx_scrq_flush() when the ->resetting flag is true and was tested that way. But during the final rebase to net-next, the hunk got applied to a block few lines below (which happened to have the same diff context) and the wrong call to ibmvnic_tx_scrq_flush() got removed. Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring the one that was incorrectly removed. Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") Reported-by: Dany Madden <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-21r8169: Avoid duplicate sysfs entry creation errorSayanta Pattanayak1-1/+2
When registering the MDIO bus for a r8169 device, we use the PCI bus/device specifier as a (seemingly) unique device identifier. However the very same BDF number can be used on another PCI segment, which makes the driver fail probing: [ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003) [ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700' .... [ 27.684858] libphy: mii_bus r8169-700 failed to register [ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22 Add the segment number to the device name to make it more unique. This fixes operation on ARM N1SDP boards, with two boards connected together to form an SMP system, and all on-board devices showing up twice, just on different PCI segments. A similar issue would occur on large systems with many PCI slots and multiple RTL8169 NICs. Fixes: f1e911d5d0dfd ("r8169: add basic phylib support") Signed-off-by: Sayanta Pattanayak <[email protected]> [Andre: expand commit message, use pci_domain_nr()] Signed-off-by: Andre Przywara <[email protected]> Acked-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-20ixgbe: Fix packet corruption due to missing DMA syncMarkus Boehme1-1/+2
When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: [email protected] Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-20Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"Jia He1-17/+6
This reverts commit 6206b7981a36476f4695d661ae139f7db36a802d. That patch added additional spin_{un}lock_bh(), which was harmless but pointless. The orginal code path has guaranteed the pair of spin_{un}lock_bh(). We'd better revert it before we find the exact root cause of the bug_on mentioned in that patch. Fixes: 6206b7981a36 ("qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()") Cc: David S. Miller <[email protected]> Cc: Prabhakar Kushwaha <[email protected]> Signed-off-by: Jia He <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-20fsl/fman: Add fibre supportMaxim Kochetkov1-0/+1
Set SUPPORTED_FIBRE to mac_dev->if_support. It allows proper usage of PHYs with optical/fiber support. Signed-off-by: Maxim Kochetkov <[email protected]> Acked-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-20mt7530 mt7530_fdb_write only set ivl bit vid larger than 1Eric Woudstra1-1/+2
Fixes my earlier patch which broke vlan unaware bridges. The IVL bit now only gets set for vid's larger than 1. Fixes: 11d8d98cbeef ("mt7530 fix mt7530_fdb_write vid missing ivl bit") Signed-off-by: Eric Woudstra <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-20Merge branch 'octeon-DMAC'David S. Miller10-32/+427
Subbaraya Sundeep says: ==================== octeontx2-af: Introduce DMAC based switching With this patch set packets can be switched between all CGX mapped PFs and VFs in the system based on the DMAC addresses. To implement this: AF allocates high priority rules from top entry(0) in MCAM. Rules are allocated for all the CGX mapped PFs and VFs though they are not active and with no NIXLFs attached. Rules for a PF/VF will be enabled only after they are brought up. Two rules one for TX and one for RX are allocated for each PF/VF. A packet sent from a PF/VF with a destination mac of another PF/VF will be hit by TX rule and sent to LBK channel 63. The same returned packet will be hit by RX rule whose action is to forward packet to PF/VF with that destination mac. Implementation of this for 98xx is tricky since there are two NIX blocks and till now a PF/VF can install rule for an NIX0/1 interface only if it is mapped to corresponding NIX0/1 block. Hence Tx rules are modified such that TX interface in MCAM entry can be either NIX0-TX or NIX1-TX. Testing: 1. Create two VFs over PF1(on NIX0) and assign two VFs to two VMs 2. Assign ip addresses to two VFs in VMs and PF2(on NIX1) in host. 3. Assign static arp entries in two VMs and PF2. 4. Ping between VMs and host PF2. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-07-20net: hns3: fix rx VLAN offload state inconsistent issueJian Shen1-0/+10
Currently, VF doesn't enable rx VLAN offload when initializating, and PF does it for VFs. If user disable the rx VLAN offload for VF with ethtool -K, and reload the VF driver, it may cause the rx VLAN offload state being inconsistent between hardware and software. Fixes it by enabling rx VLAN offload when VF initializing. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-07-20net: hns3: disable port VLAN filter when support function level VLAN filter ↵Jian Shen1-2/+6
control For hardware limitation, port VLAN filter is port level, and effective for all the functions of the port. So if not support port VLAN bypass, it's necessary to disable the port VLAN filter, in order to support function level VLAN filter control. Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-07-20net: hns3: add match_id to check mailbox response from PF to VFPeng Li2-0/+20
When VF need response from PF, VF will wait (1us - 1s) to receive the response, or it will wait timeout and the VF action fails. If VF do not receive response in 1st action because timeout, the 2nd action may receive response for the 1st action, and get incorrect response data.VF must reciveve the right response from PF,or it will cause unexpected error. This patch adds match_id to check mailbox response from PF to VF, to make sure VF get the right response: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. This scheme depends on PF driver supports match_id, if PF driver doesn't support then VF will uses the original scheme. Signed-off-by: Peng Li <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-07-20net: hns3: fix possible mismatches resp of mailboxChengwen Feng2-2/+5
Currently, the mailbox synchronous communication between VF and PF use the following fields to maintain communication: 1. Origin_mbx_msg which was combined by message code and subcode, used to match request and response. 2. Received_resp which means whether received response. There may possible mismatches of the following situation: 1. VF sends message A with code=1 subcode=1. 2. PF was blocked about 500ms when processing the message A. 3. VF will detect message A timeout because it can't get the response within 500ms. 4. VF sends message B with code=1 subcode=1 which equal message A. 5. PF processes the first message A and send the response message to VF. 6. VF will identify the response matched the message B because the code/subcode is the same. This will lead to mismatch of request and response. To fix the above bug, we use the following scheme: 1. The message sent from VF was labelled with match_id which was a unique 16-bit non-zero value. 2. The response sent from PF will label with match_id which got from the request. 3. The VF uses the match_id to match request and response message. As for PF driver, it only needs to copy the match_id from request to response. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Chengwen Feng <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-07-19octeontx2-af: Introduce internal packet switchingSubbaraya Sundeep8-11/+336
As of now any communication between CGXs PFs and their VFs within the system is possible only by external switches sending packets back to the system. This patch adds internal switching support. Broadcast packet replication is not covered here. RVU admin function (AF) maintains MAC addresses of all interfaces in the system. When switching is enabled, MCAM entries are allocated to install rules such that packets with DMAC matching any of the internal interface MAC addresses is punted back into the system via the loopback channel. On the receive side the default unicast rules are modified to not check for ingress channel. So any packet with matching DMAC irrespective of which interface it is coming from will be forwarded to the respective PF/VF interface. The transmit side rules and default unicast rules are updated if user changes MAC address of an interface. Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19octeontx2-af: Prepare for allocating MCAM rules for AFSubbaraya Sundeep3-18/+30
AF till now only manages the allocation and freeing of MCAM rules for other PF/VFs in system. To implement L2 switching between all CGX mapped PF and VFs, AF requires MCAM entries for DMAC rules for each PF and VF. This patch modifies AF driver such that AF can also allocate MCAM rules and install rules for other PFs and VFs. All the checks like channel verification for RX rules and PF_FUNC verification for TX rules are relaxed in case AF is allocating or installing rules. Also all the entry and counter to owner mappings are set to NPC_MCAM_INVALID_MAP when they are free indicating those are not allocated to AF nor PF/VFs. This patch also ensures that AF allocated and installed entries are displayed in debugfs. Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19octeontx2-af: Enable transmit side LBK linkSubbaraya Sundeep5-3/+61
For enabling VF-VF switching the packets egressing out of CGX mapped VFs needed to be sent to LBK so that same packets are received back to the system. But the LBK link also needs to be enabled in addition to a VF's mapped CGX_LMAC link otherwise hardware raises send error interrupt indicating selected LBK link is not enabled in NIX_AF_TL3_TL2X_LINKX_CFG register. Hence this patch enables all LBK links in TL3_TL2_LINKX_CFG registers. Also to enable packet flow between PFs/VFs of NIX0 to PFs/VFs of NIX1(in 98xx silicon) the NPC TX DMAC rules has to be installed such that rules must be hit for any TX interface i.e., NIX0-TX or NIX1-TX provided DMAC match creteria is met. Hence this patch changes the behavior such that MCAM is programmed to match with any NIX0/1-TX interface for TX rules. Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19net: hisilicon: rename CACHE_LINE_MASK to avoid redefinitionRandy Dunlap1-3/+3
Building on ARCH=arc causes a "redefined" warning, so rename this driver's CACHE_LINE_MASK to avoid the warning. ../drivers/net/ethernet/hisilicon/hip04_eth.c:134: warning: "CACHE_LINE_MASK" redefined 134 | #define CACHE_LINE_MASK 0x3F In file included from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:19, from ../include/linux/list.h:9, from ../include/linux/module.h:12, from ../drivers/net/ethernet/hisilicon/hip04_eth.c:7: ../arch/arc/include/asm/cache.h:17: note: this is the location of the previous definition 17 | #define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1)) Fixes: d413779cdd93 ("net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC") Signed-off-by: Randy Dunlap <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Jiangfeng Xiao <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: Fix PTP capability discoveryMichael Chan1-1/+5
The current PTP initialization logic does not account for firmware reset that may cause PTP capability to change. The valid pointer bp->ptp_cfg is used to indicate that the device is capable of PTP and that it has been initialized. So we must clean up bp->ptp_cfg and free it if the firmware after reset does not support PTP. Fixes: 93cb62d98e9c ("bnxt_en: Enable hardware PTP support") Cc: Richard Cochran <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: Move bnxt_ptp_init() to bnxt_open()Michael Chan3-25/+16
The device needs to be in ifup state for PTP to function, so move bnxt_ptp_init() to bnxt_open(). This means that the PHC will be registered during bnxt_open(). This also makes firmware reset work correctly. PTP configurations may change after firmware upgrade or downgrade. bnxt_open() will be called after firmware reset, so it will work properly. bnxt_ptp_start() is now incorporated into bnxt_ptp_init(). We now also need to call bnxt_ptp_clear() in bnxt_close(). Fixes: 93cb62d98e9c ("bnxt_en: Enable hardware PTP support") Cc: Richard Cochran <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: Check abort error state in bnxt_half_open_nic()Somnath Kotur1-0/+6
bnxt_half_open_nic() is called during during ethtool self test and is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_half_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The ethtool self test will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_half_open_nic() were to continue in this error state, it may crash like this: bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Process ethtool (pid: 333327, stack limit = 0x0000000046476577) Call trace: bnxt_alloc_mem+0x444/0xef0 [bnxt_en] bnxt_half_open_nic+0x24/0xb8 [bnxt_en] bnxt_self_test+0x2dc/0x390 [bnxt_en] ethtool_self_test+0xe0/0x1f8 dev_ethtool+0x1744/0x22d0 dev_ioctl+0x190/0x3e0 sock_ioctl+0x238/0x480 do_vfs_ioctl+0xc4/0x758 ksys_ioctl+0x84/0xb8 __arm64_sys_ioctl+0x28/0x38 el0_svc_handler+0xb0/0x180 el0_svc+0x8/0xc Fixes: a1301f08c5ac ("bnxt_en: Check abort error state in bnxt_open_nic().") Signed-off-by: Somnath Kotur <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: Validate vlan protocol ID on RX packetsMichael Chan1-5/+16
Only pass supported VLAN protocol IDs for stripped VLAN tags to the stack. The stack will hit WARN() if the protocol ID is unsupported. Existing firmware sets up the chip to strip 0x8100, 0x88a8, 0x9100. Only the 1st two protocols are supported by the kernel. Fixes: a196e96bb68f ("bnxt_en: clean up VLAN feature bit handling") Reviewed-by: Somnath Kotur <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: fix error path of FW resetSomnath Kotur1-10/+21
When bnxt_open() fails in the firmware reset path, the driver needs to gracefully abort, but it is executing code that should be invoked only in the success path. Define a function to abort FW reset and consolidate all error paths to call this new function. Fixes: dab62e7c2de7 ("bnxt_en: Implement faster recovery for firmware fatal error.") Signed-off-by: Somnath Kotur <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task()Michael Chan1-0/+4
In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after we acquire the rtnl_lock. If the flag is set, we need to abort. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe()Michael Chan1-4/+5
The capabilities can change after firmware upgrade/downgrade, so we should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe() is called. Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.") Reviewed-by: Somnath Kotur <[email protected]> Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: reject ETS settings that will starve a TCEdwin Peer1-1/+9
ETS proportions are presented to HWRM_QUEUE_COS2BW_CFG as minimum bandwidth constraints. Thus, zero is a legal value for a given TC. However, if all the other TCs sum up to 100%, then at least one hardware queue will starve, resulting in guaranteed TX timeouts. Reject such nonsensical configurations. Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-19bnxt_en: don't disable an already disabled PCI deviceKalesh AP1-1/+2
If device is already disabled in reset path and PCI io error is detected before the device could be enabled, driver could call pci_disable_device() for already disabled device. Fix this problem by calling pci_disable_device() only if the device is already enabled. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Kalesh AP <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-16bonding: fix build issueMahesh Bandewar1-0/+2
The commit 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") is causing following build error when XFRM is not selected in kernel config. lld: error: undefined symbol: xfrm_dev_state_flush >>> referenced by bond_main.c:3453 (drivers/net/bonding/bond_main.c:3453) >>> net/bonding/bond_main.o:(bond_netdev_event) in archive drivers/built-in.a Fixes: 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Mahesh Bandewar <[email protected]> CC: Taehee Yoo <[email protected]> CC: Jay Vosburgh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-16mt7530 fix mt7530_fdb_write vid missing ivl bitEric Woudstra2-0/+2
According to reference guides mt7530 (mt7620) and mt7531: NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0] will be used to read/write the address table. Since the function only fills in CVID and no FID, we need to set the IVL bit. The existing code does not set it. This is a fix for the issue I dropped here earlier: http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html With this patch, it is now possible to delete the 'self' fdb entry manually. However, wifi roaming still has the same issue, the entry does not get deleted automatically. Wifi roaming also needs a fix somewhere else to function correctly in combination with vlan. Signed-off-by: Eric Woudstra <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-15Merge tag 'Wimplicit-fallthrough-clang-5.14-rc2' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo Silva: "This fixes many fall-through warnings when building with Clang and -Wimplicit-fallthrough, and also enables -Wimplicit-fallthrough for Clang, globally. It's also important to notice that since we have adopted the use of the pseudo-keyword macro fallthrough, we also want to avoid having more /* fall through */ comments being introduced. Contrary to GCC, Clang doesn't recognize any comments as implicit fall-through markings when the -Wimplicit-fallthrough option is enabled. So, in order to avoid having more comments being introduced, we use the option -Wimplicit-fallthrough=5 for GCC, which similar to Clang, will cause a warning in case a code comment is intended to be used as a fall-through marking. The patch for Makefile also enforces this. We had almost 4,000 of these issues for Clang in the beginning, and there might be a couple more out there when building some architectures with certain configurations. However, with the recent fixes I think we are in good shape and it is now possible to enable the warning for Clang" * tag 'Wimplicit-fallthrough-clang-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (27 commits) Makefile: Enable -Wimplicit-fallthrough for Clang powerpc/smp: Fix fall-through warning for Clang dmaengine: mpc512x: Fix fall-through warning for Clang usb: gadget: fsl_qe_udc: Fix fall-through warning for Clang powerpc/powernv: Fix fall-through warning for Clang MIPS: Fix unreachable code issue MIPS: Fix fall-through warnings for Clang ASoC: Mediatek: MT8183: Fix fall-through warning for Clang power: supply: Fix fall-through warnings for Clang dmaengine: ti: k3-udma: Fix fall-through warning for Clang s390: Fix fall-through warnings for Clang dmaengine: ipu: Fix fall-through warning for Clang iommu/arm-smmu-v3: Fix fall-through warning for Clang mmc: jz4740: Fix fall-through warning for Clang PCI: Fix fall-through warning for Clang scsi: libsas: Fix fall-through warning for Clang video: fbdev: Fix fall-through warning for Clang math-emu: Fix fall-through warning cpufreq: Fix fall-through warning for Clang drm/msm: Fix fall-through warning in msm_gem_new_impl() ...
2021-07-15usb: hso: fix error handling code of hso_create_net_deviceDongliang Mu1-10/+23
The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: [email protected] Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-15qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()Jia He1-6/+17
Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by: Lijian Zhang <[email protected]> Signed-off-by: Jia He <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-15liquidio: Fix unintentional sign extension issue on left shift of u16Colin Ian King1-1/+1
Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS (29) bits will be promoted to a 32 bit signed int and then sign-extended to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7) the shifted value will be sign extended and the top 32 bits of the result will be set. Fix this by casting the u16 values to a u64 before the 29 bit left shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 3451b97cce2d ("liquidio: CN23XX register setup") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-15net: dsa: mv88e6xxx: NET_DSA_MV88E6XXX_PTP should depend on NET_DSA_MV88E6XXXGeert Uytterhoeven1-1/+1
Making global2 support mandatory removed the Kconfig symbol NET_DSA_MV88E6XXX_GLOBAL2. This symbol also served as an intermediate symbol to make NET_DSA_MV88E6XXX_PTP depend on NET_DSA_MV88E6XXX. With the symbol removed, the user is always asked about PTP support for Marvell 88E6xxx switches, even if the latter support is not enabled. Fix this by reinstating the dependency. Fixes: 63368a7416df144b ("net: dsa: mv88e6xxx: Make global2 support mandatory") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-14r8152: Fix a deadlock by doubly PM resumeTakashi Iwai1-9/+18
r8152 driver sets up the MAC address at reset-resume, while rtl8152_set_mac_address() has the temporary autopm get/put. This may lead to a deadlock as the PM lock has been already taken for the execution of the runtime PM callback. This patch adds the workaround to avoid the superfluous autpm when called from rtl8152_reset_resume(). Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194 Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-14r8152: Fix potential PM refcount imbalanceTakashi Iwai1-1/+2
rtl8152_close() takes the refcount via usb_autopm_get_interface() but it doesn't release when RTL8152_UNPLUG test hits. This may lead to the imbalance of PM refcount. This patch addresses it. Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194 Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.