aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-06-21wifi: iwlwifi: bump FW API to 83 for AX/BZ/SC devicesGregory Greenman3-3/+3
Start supporting API version 83 for new devices. Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130444.267a136ea57f.Iaef9f04b9655c5c1b8bdee3b89cc3361ab621bcf@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: cfg: remove trailing dash from FW_PRE constantsJohannes Berg14-162/+150
We have the trailing dash here, but that complicates all the code. Simplify this by removing the dashes, adding them to the *_MODULE_FIRMWARE macros, and adjusting the code using this accordingly. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.72240ca13b83.I1f4ed547f0964719ed98a3ef928080462d594491@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: also unify Ma device configurationsJohannes Berg3-127/+19
Again, they're all the same except for the radio and steps, so use the new logic to unify them. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.676887cc8180.I29994dec43bfb29aad5e4ab0126c06a9ea4670cb@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: also unify Sc device configurationsJohannes Berg3-91/+7
Again, they're all the same except for the radio and steps, so use the new logic to unify them. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.3bc1191f883f.If1e6f73a164b0794ac65372b72673ce8ddf9e571@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: unify Bz/Gl device configurationsJohannes Berg7-239/+102
All the configurations for the various Bz/Gl devices are basically identical, except for Gl A-step and the firmware filename prefixes. Add some infrastructure to auto-generate the firmware filename prefix based on the detected MAC step and RF name/step, and remove all the unneeded configs. This reduces the size of the iwlwifi module by ~9k: 517582 27111 560 545253 851e5 drivers/net/wireless/intel/iwlwifi/iwlwifi.ko 526885 27083 560 554528 87620 drivers/net/wireless/intel/iwlwifi/iwlwifi.ko Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.1dc121ba338f.I07d651516eb82cbaded4724ef30558a50f2fa866@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: pcie: also drop jacket from info macroJohannes Berg1-110/+109
We don't need this here anymore, ANY is just fine. Still keep the rest of the infrastructure so we can more easily add back support for testing. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.168c714cbb83.I0721ce86a042c4d8004914129bab46d7ccc8cb00@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: remove support for *nJ devicesJohannes Berg5-529/+0
These are test chips that will never reach anyone outside of Intel, so remove support for them. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.d9f4e0356ae4.If9eccc22eb500dfff8973a70a649d94af7a60841@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: don't load old firmware for 22000Johannes Berg1-1/+1
The earliest firmware released for these products is with API version 50, so there's no point in trying to load any versions before that. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.768186c0475d.I7de717072221712176a3085d71c8018ae0348db8@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: don't load old firmware for ax210Johannes Berg1-1/+1
The earliest firmware released for these products is with API version 59 (for 'ty' only), so no point trying to go back in time even further than that. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.ebe02b5dbddb.I51484ebb6c89256b0e6e7f9bb24f597c4ebead67@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: don't load old firmware for BzJohannes Berg1-1/+1
This is a future product, don't try to load ancient firmware images for it, they don't exist anyway. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.a6961592f258.Ib7afecd46b1963164481c2acf35d2582691ef0bc@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: don't load old firmware for ScJohannes Berg1-1/+1
This is a future product, don't try to load ancient firmware images for it, they don't exist anyway. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.a15e7bf936cb.I68c3c71fda62c837e4da885a42471bf772ac1202@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: give Sc devices their own familyJohannes Berg2-2/+3
They're not the same as Bz or any prior ones, and there's already one place in the driver that would erroneously assign a workaround to A-step Sc devices if they're just treated as a version of Bz. Fix that. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.e98272ddb808.If18577b2393f631d1bfaa931287cae106fa32438@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: split 22000.c into multiple filesJohannes Berg7-928/+1206
Split the configuration list in 22000.c into four new files, per new device family, so we don't have this huge unusable file. Yes, this duplicates a few small things, but that's still much better than what we have now. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.7543603b2ee7.Ia8dd54216d341ef1ddc0531f2c9aa30d30536a5d@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: Add support for new CNVi (SC)Mukesh Sisodiya3-1/+137
Add support for the new Integrated Connectivity (CNVi) and Companion RF (CRF) versions and their combinations to handle new devices. Signed-off-by: Mukesh Sisodiya <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.716fd707e847.I34f6ffd61e3210c926868a3e961b16d1742bba29@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: Add support for new Bz versionMukesh Sisodiya3-6/+75
Add support for the new version of the Bz CNVI device. Signed-off-by: Mukesh Sisodiya <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230621130443.82d436d5f346.I0154c202c5d895cb002a2b7c827b9536e81a84b5@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: Add support for scan version 17Ilan Peer2-42/+99
Add support for scan request command version 17, which supports specifying the maximal EIRP PSD value that can be used for probe request transmission on a given channel. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.0a41c847d450.I0c9b45cc3eb39d44c75d3bdca84f0a91fdad1fa1@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: adjust skip-over-dtim in D3Johannes Berg1-4/+3
The current formula can skip both too much and not enough time, given the +1 (where the comment about firmware is wrong). Adjust the formula accordingly. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.32406b6828ae.I88c315b85f7c56ac6109f84580b95a3dd104ff6c@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: check only affected linksJohannes Berg1-1/+2
When hostapd starts up, it may start up with only one link while the other is still scanning for overlapping BSSes. A station might start to connect at this point, but we run into this warning instead. Since there's no need to check for _all_ links, restrict the check to just the affected links that the STA will be using. Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Reported-by: Miri Korenblit <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.c3d5a006ec21.Ib4715381f598f4c18d67cd9598ebd5cdbe7d2b09@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: avoid baid size integer overflowJohannes Berg1-1/+1
Roee reported various hard-to-debug crashes with pings in EHT aggregation scenarios. Enabling KASAN showed that we access the BAID allocation out of bounds, and looking at the code a bit shows that since the reorder buffer entry (struct iwl_mvm_reorder_buf_entry) is 128 bytes if debug such as lockdep is enabled, then staring from an agg size 512 we overflow the size calculation, and allocate a much smaller structure than we should, causing slab corruption once we initialize this. Fix this by simply using u32 instead of u16. Reported-by: Roee Goldfiner <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.f428c856030d.I2c2bb808e945adb71bc15f5b2bac2d8957ea90eb@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: indicate HW decrypt for beacon protectionJohannes Berg1-3/+6
We've already done the 'decryption' here, so tell mac80211 it need not do it again. Fixes: b1fdc2505abc ("iwlwifi: mvm: advertise BIGTK client support if available") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.a50cf68fbf2e.Ieceacbe3789d81ea02ae085ad8d1f8813a33c31b@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: support new flush_sta methodJohannes Berg3-0/+28
For iwlwifi this is simple to implement, and on newer hardware it's an improvement since we have per-station queues. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.a1f8ec20b727.I48594b708b41aa55dc2b8c3d346b4412ad3a5ba3@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: Add support for new PCI IdMukesh Sisodiya1-0/+2
Add support for the PCI Id 51F1 without IMR support. Signed-off-by: Mukesh Sisodiya <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.9800e652e789.Ic06a085832ac3f988c8ef07d856c8e281563295d@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: send LARI configuration earlierBenjamin Berg1-1/+2
Sending the LARI configuration may trigger calibration, which can have undesired side effects. Move the command to be send earlier (before the phy contexts are registered) to avoid unintended side effects. Signed-off-by: Benjamin Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.80742497eb3f.I3e599a796290082e6d331ea495a5591d55de4726@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: remove disable_dummy_notificationJohannes Berg2-5/+1
This struct member is read-only, so can never change away from the default value of zero. Remove the code that's in an if on the value, since it's effectively dead code. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.e7c96d0aa805.I5b158ce15e48393d2896c0bff9f644d983f0e92d@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: limit EHT capabilities based on PCIe link speedJohannes Berg3-4/+24
If a discrete NIC is connected to a PCIe link hat isn't at least Gen3 (8.0 GT/s), then we cannot sustain 320 MHz traffic, so remove that from EHT capabilities in that case. While at it, also move setting 320 MHz beamformee to the right place in the code so it's not set while not supporting 320 MHz. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.b77a1574a0a7.Id4120c161fb7df6dedc70d5f3e3829e9117b8cb1@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: add EHT A-MPDU size exponent supportJohannes Berg1-9/+18
Add support for reading the EHT MAC capabilities A-MPDU size exponent field, as indicated by the draft spec. Also clarify the existing code a bit and add comments so it's clearer to understand what's going on here. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.c5e00045d90f.I7520787fca8f8430a564adedf975d069ad8c5417@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: use min_t() for agg_sizeJohannes Berg1-3/+2
We can use min_t() for the agg_size and avoid spelling out the (firmware) limit twice. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.211768036c1f.I78b7eea32eaae20cc9f32869aa3f42814634ce9a@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: use EHT maximum MPDU length on 2.4 GHzJohannes Berg1-2/+13
On 2.4 GHz there's no VHT, so EHT defines its own bits for the maximum MPDU length. Use them when telling firmware about the maximum. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.fd5322bb48a4.Ic471045f83229ceaacce25edcf992d3ce2c75de5@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: nvm: handle EHT/320 MHz regulatory flagJohannes Berg1-0/+7
Handle the regulatory EHT/320 MHz flags from firmware just like any other flags before it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.2c5e886c08f3.Ibc5c27d973d0590e2dea1f50435f9cf3ba8c2c09@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: make iwl_mvm_set_fw_mu_edca_params mld awareEmmanuel Grumbach3-7/+7
We need to work on the right link there. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.8762a90e8857.Ic5b8e96140a449fd1ed7008907d67fc36fe98506@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: fw: send marker cmd before suspend cmdMiri Korenblit4-28/+58
This is needed to sync the times in the FW and driver logs Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.9c84322c41b5.Id13816b3ece103f88514a7523b22bb2b9dcc8ab7@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: mvm: check the right csa_activeEmmanuel Grumbach1-1/+4
When the firmware says that the channel switch is happening, we check that we know about that switch by checking the csa_active bit. Until now, we checked the bss_conf from the vif instead of taking the bss_conf of the link. Fix that. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.63f835a4f578.I0bb2a231e4da506b7c751dc23a428558f9ecfa75@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: pcie: add size assertionsJohannes Berg2-1/+11
Ensure that the TX command scratch fits into the buffer provided by the first TB. It does, of course, but add some build-time validations in case we touch this code. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.8f54f2990b92.If19a038dfd633d4601e3d44dd0ff678bc0a851e9@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: iwlwifi: pcie: refactor RB status size calculationJohannes Berg1-10/+14
We have three places doing this check, and even in slightly different ways (with/without an intermediate). Refactor that to a new small inline function. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230620125813.f3e87ddd5bce.Ifefba753043b68c394590a35bc6914a0f6497fd3@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-06-21wifi: p54: Add missing MODULE_FIRMWARE macroJuerg Haefliger1-0/+1
Add the missing MODULE_FIRMWARE macro for "3826.eeprom". Signed-off-by: Juerg Haefliger <[email protected]> Acked-by: Christian Lamparter <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw89: use struct to parse firmware headerPing-Ke Shih3-80/+87
A firmware contains basic header, sections and optional dynamic header. Define them by a struct, so it will be easier to understand the layout, and also simply access these elements. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw89: TX power stuffs replace confusing naming of _max with _numZong-Zhe Yang8-43/+43
Some old declarations about TX power stuffs were named with confusing `_max`. But, they mean "the number of". So we change them to be named with `_num`. (No logic is changed.) Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw89: 8851b: configure to force 1 TX power valuePing-Ke Shih2-0/+25
RTL8851B is a chip with only single RF path, and it must use 1 TX power value for transmission, so force 1 TX power value to prevent hardware logic gets wrong TX power values randomly in certain samples. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw89: 8851b: rfk: update IQK to version 0x8Ping-Ke Shih2-54/+63
The main change is to adjust RX calibration groups from {0,1,2,3} to {0,2} in 5 GHz, so reduce elements from 4 to 2, and use index to iterate them. Meanwhile, always do RX narrowband calibration (ID_NBRXK) for each group. NCTL is used to assist IQK, so also update NCTL to 0x6 along with internal tag HALRF_029_00_103. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw89: 8851b: rfk: add LCK trackPing-Ke Shih4-1/+69
LCK is short for LC Tank calibration. To keep RF performance, do this calibration if difference of thermal value is over a threshold. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw89: 8851b: update TX power tables to R28Zong-Zhe Yang1-110/+110
Update 8851B TX power tables to RF version R28. TX power tables' changes: * TX power limit and TX power shape: update 5 GHz configurations for FCC and IC Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw89: 8851b: update RF radio A parameters to R28Ping-Ke Shih1-6/+22
Update 8851b radio A parameters to R28 along with internal HALRF_029_00_103 Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw88: fix not entering PS mode after AP stopsPo-Hao Huang5-0/+35
Without this patch, firmware only track beacons for port 0 and since we will always start AP on port 0, this results in misbehavior of power saving mode on other ports after AP stops. The "default port" H2C command is used to notify which port should firmware track. Update the correct settings to firmware so power saving mode can work properly. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw88: refine register based H2C commandPo-Hao Huang2-0/+56
Since register based H2C commands don't need endian conversion. Introduce a new API that don't do conversion and send it directly. New caller are expected to encode with cpu order and gradually replace the old ones. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw88: Stop high queue during scanPo-Hao Huang2-2/+6
When traversing channel list, TX in high queue should be disabled along with beacon function, so packets won't be sent to incorrect channels. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw88: Skip high queue in hci_flushPo-Hao Huang1-2/+3
The flush period may not always intersect with DTIM and when that happens, an error log "timed out to flush pci TX ring[6]" is shown. Bypass this since hardware will do proper transmission on the next DTIM period for broadcast/multicast packets in high queue. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw88: Fix AP mode incorrect DTIM behaviorPo-Hao Huang5-1/+13
Broadcast and multicast packets in high queue should be transmitted all at once during DTIM. But without proper settings, hardware fails to recognize that there are multiple packets and fetches only one. Fix this by signaling hardware with more data bit set when there are packets in the high queue. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw88: use struct instead of macros to set TX descPo-Hao Huang4-113/+106
Remove macros that set TX descriptors. Use struct and le32_encode_bits() with mask definitions. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw88: process VO packets without workqueue to avoid PTK rekey failedChih-Kang Chang3-3/+14
In the wpa_supplicant rekey flow, it sends an EAPOL packet 4/4 through nl80211_tx_control_port() and triggers wake_tx_queue() in the driver. Then, it sends nl80211_new_key() to configure a new key in mac80211. However, in wake_tx_queue(), a workqueue is used to process the tx packet, which might cause the driver to process the EAPOL packet later than nl80211_new_key(). As a result, the EAPOL 4/4 packet is dropped by mac80211 due to the rekey configuration being finished. The EAPOL packets belongs to VO packets that need high priority. Therefore, we process VO packets directly without workqueue to ensure that packets can process immediately. VO is normally used by voice application that is low traffic load and low latency, that doesn't affect user experience. We test iperf with VO packets(iperf3 -P4 -u -b 10000M -S 0xdf) before after TX throughput 162M 162M ping RTT 3.8ms 3.7ms Signed-off-by: Chih-Kang Chang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-21wifi: rtw88: Fix action frame transmission fail before associationPo-Hao Huang1-2/+1
For combo chips, antennas were controlled by bluetooth only during power on. If WiFi wish to do transmission, notification to the coexistence module are required. Previously we only do this before authentication. To allow transmission before auth, such as management TX, now we start the initiation of coexistence earlier so antennas are shared between WiFi and bluetooth after set_channel(), and frames could then be sent. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.