aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2011-07-11iwlagn: add CMD_ON_DEMAND flag for host command from testmodeWey-Yi Guy2-0/+2
For all the hist command request from testmode, set the CMD_ON_DEMAND flag. this flag will be used later to control the uCode behavior Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: declare staticWey-Yi Guy1-1/+1
Declare iwl_mac_rssi_callback as "static" Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: Enable/disable PS poll based on RSSI and BT coex traffic stateMeenakshi Venkataraman6-2/+150
WiFi throughput drops drastically when BT is turned on, BT and WiFi are simultaneously transmitting/receiving traffic. This is particularly true when BT has higher priority over WiFi, and hence the device defers TX frames. The AP assumes that the channel is bad and reduces the data rate, implying longer airtime, which exacerbates the problem further, resulting ultimately in what is popularly called the "death-spiral" phenomenon. The use of PS-poll in such scenarios guarantees a low but consistent throughput. Since the death-spiral phenomenon is observed only when the RSSI is low, use PS-poll only when RSSI is low and disable when high, with a known hysterisis. This feature specifies the high and low thresholds and implements the callbacks registered with mac80211, which will be called when threshold events occur. iwlwifi: dynamic pspoll: optimize rssi monitor code Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: use bt handler for 2030 and 135 series devicesWey-Yi Guy1-2/+23
For bt combo devices, need to use bt enabled handlers and functions Reported-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: remove double level temperature indirect callWey-Yi Guy6-25/+9
No need to do double level indirect call after driver split no functional changes Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: remove indirection for eeprom_query_addrFry, Donald H9-19/+4
Not needed since the driver split. Eliminate redundant routine. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: remove the indirection for iwl_apm_initFry, Donald H7-34/+11
Not needed since the driver split. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: remove the indirection for update_chain_flagsFry, Donald H8-16/+5
Not needed since the driver split. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: provide heplers to access the transport opsEmmanuel Grumbach17-50/+104
This removes the for priv->trans.ops->... Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: remove the indirection for the dma channel numWey-Yi Guy8-10/+3
Not needed since the driver split. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: consolidate the API that sends host commands and move to transportEmmanuel Grumbach19-92/+100
Now, there are only two functions to send a host command: * send_cmd that receives a iwl_host_cmd * send_cmd_pdu that builds the iwl_host_cmd itself and received flags The flags CMD_ASYNC / CMD_SYNC / CMD_WANT_SKB are not changed by the API functions. Kill the unused flags CMD_SIZE_NORMAL / CMD_NO_SKB on the way. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: remove code duplicationEmmanuel Grumbach2-22/+0
Code duplication was needed during the move, not needed any more. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: add an API for TX stopEmmanuel Grumbach7-55/+59
Tx stop moves to transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: add an API for RX stopEmmanuel Grumbach4-18/+19
Rx stop moves to transport layer. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: add an API to free the TX contextEmmanuel Grumbach8-148/+95
Tx free functions move to the transport layer. Unify the functions that deal with tx queues and cmd queue. Since the CMD queue is not fully allocated, but uses the q->n_bd / q->window trick, the release flow of TX queue and CMD queue was different. iwlagn_txq_free_tfd receives now the index of the TFD to be freed, which allows to unify the release flow for all the queues. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11iwlagn: remove the CMD_MAPPED flagEmmanuel Grumbach2-13/+4
It is uneeded since Johannes removed the HUGE flag. The DMA mapping is always held in the same index as the command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-11Merge branch 'master' of ↵John W. Linville7-11/+25
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 Conflicts: drivers/net/wireless/ath/ath5k/sysfs.c net/bluetooth/l2cap_core.c net/mac80211/wpa.c
2011-07-08ath9k_htc: Inform stack about tx ack statusRajkumar Manoharan1-0/+1
Recent firmware changes report tx ack status properly to driver. Hence updating ath9k_htc driver capabilities. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath9k_hw: Remove read-only registers from AR9003 intervalsRajkumar Manoharan1-3/+1
This patch removes read only registers that cause invalid address access and also updates index for measurement filter calibration window size. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath9k_hw: Disable power detector calibration for AR9003Rajkumar Manoharan1-2/+2
The power detector calibration is disabled because this block doesn't exist in AR9003 based chips and also parallel calibration is enabled otherwise the calibration will never stop. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath9k_hw: Update AR9003 interval to improve 5G Tx EVMRajkumar Manoharan1-1/+1
The number of temperature reading samples to average during a Tx packet is decreased to 1 from 2 to improve 5G Tx EVM with chain 0-only mode. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath9k_hw: Disable PAPRD based on paprd_ht20_mask for 5GHzMohammed Shafi Shajakhan2-0/+32
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mwifiex: 4-byte alignment in mwifiex_process_sta_txpd()Yogesh Ashok Powar2-5/+12
In XMIT path, the skb that we get from the kernel itself is not aligned with 4-byte boundary on some embedded platforms. Had it not been the presence of tx_pkt_offset field in txpd, 4 byte memory alignment was not possible without memmove of entire skb. And that would have increased MIPS instead of reducing. With this patch few memory cycles can be saved while fetching interface header and txpd structure because of 4 bytes memory alignment. Reported-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mwifiex: fix minor issue in debugfs command 'info'Amitkumar Karwar1-1/+1
Debugfs command 'info' shows wrong interface type. The regression occurred due to commit eecd8250e (mwifiex: remove MWIFIEX_BSS_MODE_ macros) in which we replaced MWIFIEX_BSS_MODE_* macros by NL80211_IFTYPE_*, for example, MWIFIEX_BSS_MODE_IBSS (2) --> NL80211_IFTYPE_ADHOC (1) The issue is fixed by swapping static character array used to display interface type information. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mwifiex: fix regression in WEP security modeAmitkumar Karwar1-1/+1
Htcapinfo is unnecessarily sent in assoc request in WEP security due to a regression introduced by commit 2be50b8df53 (mwifiex: remove redundant encryption_mode mapping). The issue is fixed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: read sc->imask with sc->irqlock heldPavel Roskin1-1/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> sc->imask may change if ath5k_set_current_imask() races against itself. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use kstrtoint() to parse numbers coming from sysfsPavel Roskin1-2/+4
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: fix formatting errors found by checkpatch.plPavel Roskin15-180/+182
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: fix misplaced or extraneous braces found by checkpatch.plPavel Roskin4-16/+14
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use parentheses around macro definitionsPavel Roskin2-7/+8
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: don't use volatile, it's not neededPavel Roskin1-1/+1
Signed-off-by: Pavel Roskin <proski@gnu.org> The reg variable is only used by __raw_writel() and __raw_readl(), which should guarantee memory access in the right order. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use more readable way to clear MAC addressPavel Roskin1-1/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use DEFINE_PCI_DEVICE_TABLE in led.c, mark users with __devinitPavel Roskin2-4/+4
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: use KERN_WARNING in ATH5K_PRINTFPavel Roskin1-1/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: remove unneeded parentheses after returnPavel Roskin2-2/+2
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: replace spaces with tabs as suggested by checkpatch.plPavel Roskin10-94/+94
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath5k: remove PRIV_ENTRY and PRIV_ASSIGN macros, they obfuscate the codePavel Roskin1-9/+6
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08carl9170: Implement tx_frames_pending mac80211 callback functionChristian Lamparter1-0/+8
Implementing this callback function will cause mac80211 refrain from going to powersave state when there are still untransmitted TX frames in the queues. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08net/b43: don't return IRQ_HANDLED if nothing was doneSebastian Andrzej Siewior1-1/+1
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: HT-PHY: define dummy TX power functionsRafał Miłecki1-2/+10
Without them we get Oops with NULL pointer Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08ath9k_htc: do not configure filter before driver is startedRajkumar Manoharan1-2/+7
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: LCN-PHY: include new PHY in common codeRafał Miłecki2-0/+9
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: define firmwares for HT and LCN PHYsRafał Miłecki1-0/+40
We were uploading different firmwares to the hardware until finding responding one. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: LCN-PHY add place for new PHY supportRafał Miłecki7-0/+125
LCN-PHY was found in 14e4:4727 card. It uses LCN/1 and 0x2064/1 radio. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: read radio ID on new coresRafał Miłecki1-1/+13
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: use radio ID reading code to older cores onlyRafał Miłecki1-15/+23
Newer ones need separated way Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: select BLOCKIO for BCMARafał Miłecki1-0/+6
We want PIO as fallback for BCMA as well. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: change selecting ucode for newer coresRafał Miłecki1-9/+17
Older cores had unique PHY. This is not true anymore for newer ones. For example core rev 16 can be LP, SSLPN or N (PHY). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: bus: add helpers for getting/setting wldev from/in bus coreRafał Miłecki3-3/+35
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: handle BCMA in bus switchesRafał Miłecki2-0/+90
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Powered by cgit, Gruvboxed by Blaster4385.