aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-07-29ibmvnic: Fix IRQ mapping disposal in error pathThomas Falcon1-1/+1
RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ error paths. Fix this and dispose of TX IRQ mappings correctly in case of an error. Fixes: ea22d51a7831 ("ibmvnic: simplify and improve driver probe function") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29Merge branch '100GbE' of ↵David S. Miller15-78/+346
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-07-29 This series contains updates to the ice driver only. Dave works around LFC settings not being preserved through link events. Fixes link issues with GLOBR reset and handling of multiple link events. Nick restores VF MSI-X after PCI reset. Kiran corrects the error code returned in ice_aq_sw_rules if the rule does not exist. Paul prevents overwriting of user set descriptors. Tarun adds masking before accessing rate limiting profile types and corrects queue bandwidth configuration. Victor modifies Tx queue scheduler distribution to spread more evenly across queue group nodes. Krzysztof sets need_wakeup flag for Tx AF_XDP. Brett allows VLANs in safe mode. Marcin cleans up VSIs on probe failure. Bruce reduces the scope of a variable. Ben removes a FW workaround. Tony fixes an unused parameter warning. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-07-29net: mvneta: fix comment about phylink_speed_downJisheng Zhang1-1/+1
mvneta has switched to phylink, so the comment should look like "We may have called phylink_speed_down before". Signed-off-by: Jisheng Zhang <[email protected]> Reviewed-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: spectrum_router: Fix use-after-free in router init / de-initIdo Schimmel1-24/+26
Several notifiers are registered as part of router initialization. Since some of these notifiers are registered before the end of the initialization, it is possible for them to access uninitialized or freed memory when processing notifications [1]. Additionally, some of these notifiers queue work items on a workqueue. If these work items are executed after the router was de-initialized, they will access freed memory. Fix both problems by moving the registration of the notifiers to the end of the router initialization and flush the work queue after they are unregistered. [1] BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:938 [inline] BUG: KASAN: use-after-free in __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103 Read of size 8 at addr ffff888038c3a6e0 by task kworker/u4:1/61 CPU: 1 PID: 61 Comm: kworker/u4:1 Not tainted 5.8.0-rc2+ #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mlxsw_core_ordered mlxsw_sp_inet6addr_event_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 __mutex_lock_common kernel/locking/mutex.c:938 [inline] __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103 mlxsw_sp_inet6addr_event_work+0xb3/0x1b0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7123 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 1298: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] mlxsw_sp_router_init+0xb2/0x1d20 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:8074 mlxsw_sp_init+0xbd8/0x3ac0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2932 __mlxsw_core_bus_device_register+0x657/0x10d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1375 mlxsw_core_bus_device_register drivers/net/ethernet/mellanox/mlxsw/core.c:1436 [inline] mlxsw_devlink_core_bus_device_reload_up+0xcd/0x150 drivers/net/ethernet/mellanox/mlxsw/core.c:1133 devlink_reload net/core/devlink.c:2959 [inline] devlink_reload+0x281/0x3b0 net/core/devlink.c:2944 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1348: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4063 mlxsw_sp_fini+0x340/0x4e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3132 mlxsw_core_bus_device_unregister+0x16c/0x6d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1474 mlxsw_devlink_core_bus_device_reload_down+0x8e/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:1123 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888038c3a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1760 bytes inside of 2048-byte region [ffff888038c3a000, ffff888038c3a800) The buggy address belongs to the page: page:ffffea0000e30e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea0000e30e00 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c40c000 raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888038c3a580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888038c3a600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888038c3a680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888038c3a700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888038c3a780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 965fa8e600d2 ("mlxsw: spectrum_router: Make RIF deletion more robust") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: core: Free EMAD transactions using kfree_rcu()Ido Schimmel1-1/+1
The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is managed using RCU. They are freed using kfree_rcu() once the transaction ends. However, in case the transaction failed it is freed immediately after being removed from the active transactions list. This is problematic because it is still possible for a different CPU to dereference the transaction from an RCU read-side critical section while traversing the active transaction list in mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered [1]. Fix this by freeing the transaction after a grace period by calling kfree_rcu(). [1] BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671 Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881 CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671 mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline] do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:387 [inline] __irq_exit_rcu kernel/softirq.c:417 [inline] irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429 sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587 RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline] RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191 Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286 RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9 RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1 R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000 __do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x473dbd Code: Bad RIP value. RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040 RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80 Allocated by task 871: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 Freed by task 871: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4052 mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88800b796400 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 232 bytes inside of 512-byte region [ffff88800b796400, ffff88800b796600) The buggy address belongs to the page: page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: caf7297e7ab5 ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: core: Increase scope of RCU read-side critical sectionIdo Schimmel1-2/+4
The lifetime of the Rx listener item ('rxl_item') is managed using RCU, but is dereferenced outside of RCU read-side critical section, which can lead to a use-after-free. Fix this by increasing the scope of the RCU read-side critical section. Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: spectrum: Use different trap group for externally routed packetsIdo Schimmel2-3/+12
Cited commit mistakenly removed the trap group for externally routed packets (e.g., via the management interface) and grouped locally routed and externally routed packet traps under the same group, thereby subjecting them to the same policer. This can result in problems, for example, when FRR is restarted and suddenly all transient traffic is trapped to the CPU because of a default route through the management interface. Locally routed packets required to re-establish a BGP connection will never reach the CPU and the routing tables will not be re-populated. Fix this by using a different trap group for externally routed packets. Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber <[email protected]> Tested-by: Alex Veber <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: spectrum_router: Allow programming link-local host routesIdo Schimmel1-9/+0
Cited commit added the ability to program link-local prefix routes to the ASIC so that relevant packets are routed and trapped correctly. However, host routes were not included in the change and thus not programmed to the ASIC. This can result in packets being trapped via an external route trap instead of a local route trap as in IPv4. Fix this by programming all the link-local routes to the ASIC. Fixes: 10d3757fcb07 ("mlxsw: spectrum_router: Allow programming link-local prefix routes") Reported-by: Alex Veber <[email protected]> Tested-by: Alex Veber <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29vxlan: Ensure FDB dump is performed under RCUIdo Schimmel1-2/+8
The commit cited below removed the RCU read-side critical section from rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked without RCU protection. This results in the following warning [1] in the VXLAN driver, which relied on the callback being invoked from an RCU read-side critical section. Fix this by calling rcu_read_lock() in the VXLAN driver, as already done in the bridge driver. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted ----------------------------- drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by bridge/166: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090 stack backtrace: CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d vxlan_fdb_dump+0x51e/0x6d0 rtnl_fdb_dump+0x4dc/0xad0 netlink_dump+0x540/0x1090 __netlink_dump_start+0x695/0x950 rtnetlink_rcv_msg+0x802/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 __sys_sendto+0x279/0x3b0 __x64_sys_sendto+0xe6/0x1a0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe14fa2ade0 Code: Bad RIP value. RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0 RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003 RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29ice: fix unused parameter warningTony Nguyen1-2/+2
Depending on PAGE_SIZE, the following unused parameter warning can be reported: drivers/net/ethernet/intel/ice/ice_txrx.c: In function ‘ice_rx_frame_truesize’: drivers/net/ethernet/intel/ice/ice_txrx.c:513:21: warning: unused parameter ‘size’ [-Wunused-parameter] unsigned int size) The 'size' variable is used only when PAGE_SIZE >= 8192. Add __maybe_unused to remove the warning. Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]>
2020-07-29ice: disable no longer needed workaround for FW loggingBen Shelton1-2/+0
For the FW logging info AQ command, we currently set the ICE_AQ_FLAG_RD in order to work around a FW issue. This issue has been fixed so remove the workaround. Signed-off-by: Ben Shelton <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: reduce scope of variableBruce Allan1-2/+4
The scope of the macro local variable 'i' can be reduced. Do so to avoid static analysis tools from complaining. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: cleanup VSI on probe failMarcin Szycik1-5/+7
As part of ice_setup_pf_sw() a PF VSI is setup; release the VSI in case of failure. Signed-off-by: Marcin Szycik <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: Allow all VLANs in safe modeBrett Creeley1-2/+57
Currently the PF VSI's context parameters are left in a bad state when going into safe mode. This is causing VLAN traffic to not pass. Fix this by configuring the PF VSI to allow all VLAN tagged traffic. Also, remove redundant comment explaining the safe mode flow in ice_probe(). Signed-off-by: Brett Creeley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: need_wakeup flag might not be set for TxKrzysztof Kazimierczak1-8/+2
This is a port of i40e commit 705639572e8c ("i40e: need_wakeup flag might not be set for Tx"). Quoting the original commit message: "The need_wakeup flag for Tx might not be set for AF_XDP sockets that are only used to send packets. This happens if there is at least one outstanding packet that has not been completed by the hardware and we get that corresponding completion (which will not generate an interrupt since interrupts are disabled in the napi poll loop) between the time we stopped processing the Tx completions and interrupts are enabled again. In this case, the need_wakeup flag will have been cleared at the end of the Tx completion processing as we believe we will get an interrupt from the outstanding completion at a later point in time. But if this completion interrupt occurs before interrupts are enable, we lose it and should at that point really have set the need_wakeup flag since there are no more outstanding completions that can generate an interrupt to continue the processing. When this happens, user space will see a Tx queue need_wakeup of 0 and skip issuing a syscall, which means will never get into the Tx processing again and we have a deadlock." As a result, packet processing stops. This patch introduces a fix for this issue, by always setting the need_wakeup flag at the end of an interrupt processing. This ensures that the deadlock will not happen. Signed-off-by: Krzysztof Kazimierczak <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: distribute Tx queues evenlyVictor Raj1-4/+51
Distribute the Tx queues evenly across all queue groups. This will help the queues to get more equal sharing among the queues when all are in use. In the previous algorithm, the next queue group node will be picked up only after the previous one filled with max children. For example: if VSI is configured with 9 queues, the first 8 queues will be assigned to queue group 1 and the 9th queue will be assigned to queue group 2. The 2 queue groups split the bandwidth between them equally (50:50). The first queue group node will share the 50% bandwidth with all of its children (8 queues). And the second queue group node will share the entire 50% bandwidth with its only children. The new algorithm will fix this issue. Signed-off-by: Victor Raj <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: Adjust scheduler default BW weightTarun Singh2-2/+13
By default the queues are configured in legacy mode. The default BW settings for legacy/advanced modes are different. The existing code was using the advanced mode default value of 1 which was incorrect. This caused the unbalanced BW sharing among siblings. The recommended default value is applied. Signed-off-by: Tarun Singh <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: Add RL profile bit mask checkTarun Singh1-5/+6
Mask bits before accessing the profile type field. Signed-off-by: Tarun Singh <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: fix overwriting TX/RX descriptor values when rebuilding VSIPaul M Stillwell Jr1-2/+8
If a user sets the value of the TX or RX descriptors to some non-default value using 'ethtool -G' then we need to not overwrite the values when we rebuild the VSI. The VSI rebuild could happen as a result of a user setting the number of queues via the 'ethtool -L' command. Fix this by checking to see if the value we have stored is non-zero and if it is then don't change the value. Signed-off-by: Paul M Stillwell Jr <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: return correct error code from ice_aq_sw_rulesKiran Patil1-1/+7
Return ICE_ERR_DOES_NOT_EXIST return code if admin command error code is ICE_AQ_RC_ENOENT (not exist). ice_aq_sw_rules is used when switch rule is getting added/deleted/updated. In case of delete/update switch rule, admin command can return ICE_AQ_RC_ENOENT error code if such rule does not exist, hence return ICE_ERR_DOES_NOT_EXIST error code from ice_aq_sw_rule, so that caller of this function can decide how to handle ICE_ERR_DOES_NOT_EXIST. Signed-off-by: Kiran Patil <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: restore VF MSI-X state during PCI resetNick Nunley3-0/+34
During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability register will be cleared. This can lead to issues when a VF is assigned to a VM because in these cases the VF driver receives no indication of the PF PCI error/reset and additionally it is incapable of restoring the cleared flag in the hypervisor configuration space without fully reinitializing the driver interrupt functionality. Since the VF driver is unable to easily resolve this condition on its own, restore the VF MSI-X flag during the PF PCI reset handling. Signed-off-by: Nick Nunley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: fix link event handling timingDave Ertman2-1/+7
When the driver experiences a link event (especially link up) there can be multiple events generated. Some of these are link fault and still have a state of DOWN set. The problem happens when the link comes UP during the PF driver handling one of the LINK DOWN events. The status of the link is updated and is now seen as UP, so when the actual LINK UP event comes, the port information has already been updated to be seen as UP, even though none of the UP activities have been completed. After the link information has been updated in the link handler and evaluated for MEDIA PRESENT, if the state of the link has been changed to UP, treat the DOWN event as an UP event since the link is now UP. Signed-off-by: Dave Ertman <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: Fix link broken after GLOBR resetDave Ertman1-4/+0
After a GLOBR, the link was broken so that a link up situation was being seen as a link down. The problem was that the rebuild process was updating the port_info link status without doing any of the other things that need to be done when link changes. This was causing the port_info struct to have current "UP" information so that any further UP interrupts were skipped as redundant. The rebuild flow should *not* be updating the port_info struct link information, so eliminate this and leave it to the link event handling code. Signed-off-by: Dave Ertman <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-29ice: Implement LFC workaroundDave Ertman6-38/+148
There is a bug where the LFC settings are not being preserved through a link event. The registers in question are the ones that are touched (and restored) when a set_local_mib AQ command is performed. On a link-up event, make sure that a set_local_mib is being performed. Move the function ice_aq_set_lldp_mib() from the DCB specific ice_dcb.c to ice_common.c so that the driver always has access to this AQ command. Signed-off-by: Dave Ertman <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-28net: stmmac: Speed down the PHY if WoL to save energyJisheng Zhang1-0/+8
When WoL is enabled and the machine is powered off, the PHY remains waiting for wakeup events at max speed, which is a waste of energy. Slow down the PHY speed before stopping the ethernet if WoL is enabled, Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: stmmac: Support WOL with phyJisheng Zhang2-0/+15
Currently, the stmmac driver WOL implementation relies on MAC's PMT feature. We have a case: the MAC HW doesn't enable PMT, instead, we rely on the phy to support WOL. Implement the support for this case. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: stmmac: only call pmt() during suspend/resume if HW enables PMTJisheng Zhang1-3/+3
This is to prepare WOL support with phy. Compared with WOL implementation which relies on the MAC's PMT features, in phy supported WOL case, device_may_wakeup() may also be true, but we should not call mac's pmt() function if HW doesn't enable PMT. And during resume, we should call phylink_start() if PMT is disabled. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: stmmac: Move device_can_wakeup() check earlier in set_wolJisheng Zhang1-3/+3
If !device_can_wakeup(), there's no need to futher check. And return -EOPNOTSUPP rather than -EINVAL if !device_can_wakeup(). Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: stmmac: Remove WAKE_MAGIC if HW shows no pmt_magic_frameJisheng Zhang1-0/+2
Remove WAKE_MAGIC from supported modes if the HW capability register shows no support for pmt_magic_frame. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: dsa: rtl8366: Fix VLAN set-upLinus Walleij1-7/+7
Alter the rtl8366_vlan_add() to call rtl8366_set_vlan() inside the loop that goes over all VIDs since we now properly support calling that function more than once. Augment the loop to postincrement as this is more intuitive. The loop moved past the last VID but called rtl8366_set_vlan() with the port number instead of the VID, assuming a 1-to-1 correspondence between ports and VIDs. This was also a bug. Cc: DENG Qingfang <[email protected]> Cc: Mauri Sandberg <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: dsa: rtl8366: Fix VLAN semanticsLinus Walleij1-4/+17
The RTL8366 would not handle adding new members (ports) to a VLAN: the code assumed that ->port_vlan_add() was only called once for a single port. When intializing the switch with .configure_vlan_while_not_filtering set to true, the function is called numerous times for adding all ports to VLAN1, which was something the code could not handle. Alter rtl8366_set_vlan() to just |= new members and untagged flags to 4k and MC VLAN table entries alike. This makes it possible to just add new ports to a VLAN. Put in some helpful debug code that can be used to find any further bugs here. Cc: DENG Qingfang <[email protected]> Cc: Mauri Sandberg <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28bareudp: forbid mixing IP and MPLS in multiproto modeGuillaume Nault1-7/+22
In multiproto mode, bareudp_xmit() accepts sending multicast MPLS and IPv6 packets regardless of the bareudp ethertype. In practice, this let an IP tunnel send multicast MPLS packets, or an MPLS tunnel send IPv6 packets. We need to restrict the test further, so that the multiproto mode only enables * IPv6 for IPv4 tunnels, * or multicast MPLS for unicast MPLS tunnels. To improve clarity, the protocol validation is moved to its own function, where each logical test has its own condition. v2: s/ntohs/htons/ Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS.") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28hinic: add log in exception handling processesLuo bin13-45/+151
improve the error message when functions return failure and dump relevant registers in some exception handling processes Signed-off-by: Luo bin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28hinic: add support to handle hw abnormal eventLuo bin10-36/+704
add support to handle hw abnormal event such as hardware failure, cable unplugged,link error Signed-off-by: Luo bin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28octeontx2-pf: Unregister netdev at driver removeSubbaraya Sundeep1-0/+1
Added unregister_netdev in the driver remove function. Generally unregister_netdev is called after disabling all the device interrupts but here it is called before disabling device mailbox interrupts. The reason behind this is VF needs mailbox interrupt to communicate with its PF to clean up its resources during otx2_stop. otx2_stop disables packet I/O and queue interrupts first and by using mailbox interrupt communicates to PF to free VF resources. Hence this patch calls unregister_device just before disabling mailbox interrupts. Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28octeontx2-pf: cancel reset_task workSubbaraya Sundeep1-0/+1
During driver exit cancel the queued reset_task work in VF driver. Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28octeontx2-pf: Fix reset_task bugsSubbaraya Sundeep1-0/+3
Two bugs exist in the code related to reset_task in PF driver one is the missing protection against network stack ndo_open and ndo_close. Other one is the missing cancel_work. This patch fixes those problems. Fixes: 4ff7d1488a84 ("octeontx2-pf: Error handling support") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28mlx4: disable device on shutdownJakub Kicinski1-0/+2
It appears that not disabling a PCI device on .shutdown may lead to a Hardware Error with particular (perhaps buggy) BIOS versions: mlx4_en: eth0: Close port called mlx4_en 0000:04:00.0: removed PHC reboot: Restarting system {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 {1}[Hardware Error]: event severity: fatal {1}[Hardware Error]: Error 0, type: fatal {1}[Hardware Error]: section_type: PCIe error {1}[Hardware Error]: port_type: 4, root port {1}[Hardware Error]: version: 1.16 {1}[Hardware Error]: command: 0x4010, status: 0x0143 {1}[Hardware Error]: device_id: 0000:00:02.2 {1}[Hardware Error]: slot: 0 {1}[Hardware Error]: secondary_bus: 0x04 {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x2f06 {1}[Hardware Error]: class_code: 000604 {1}[Hardware Error]: bridge: secondary_status: 0x2000, control: 0x0003 {1}[Hardware Error]: aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00000000 {1}[Hardware Error]: aer_uncor_severity: 0x00062030 {1}[Hardware Error]: TLP Header: 40000018 040000ff 791f4080 00000000 [hw error repeats] Kernel panic - not syncing: Fatal hardware error! CPU: 0 PID: 2189 Comm: reboot Kdump: loaded Not tainted 5.6.x-blabla #1 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 05/05/2017 Fix the mlx4 driver. This is a very similar problem to what had been fixed in: commit 0d98ba8d70b0 ("scsi: hpsa: disable device during shutdown") to address https://bugzilla.kernel.org/show_bug.cgi?id=199779. Fixes: 2ba5fbd62b25 ("net/mlx4_core: Handle AER flow properly") Reported-by: Jake Lawrence <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: ipa: new notification infrastructureAlex Elder2-21/+38
Use the new SSR notifier infrastructure to request notifications of modem events, rather than the remoteproc IPA notification system. The latter was put in place temporarily with the knowledge that the new mechanism would become available. Acked-by: David S. Miller <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Alex Elder <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-07-28ice: implement device flash update via devlinkJacob Keller9-1/+1007
Use the newly added pldmfw library to implement device flash update for the Intel ice networking device driver. This support uses the devlink flash update interface. The main parts of the flash include the Option ROM, the netlist module, and the main NVM data. The PLDM firmware file contains modules for each of these components. Using the pldmfw library, the provided firmware file will be scanned for the three major components, "fw.undi" for the Option ROM, "fw.mgmt" for the main NVM module containing the primary device firmware, and "fw.netlist" containing the netlist module. The flash is separated into two banks, the active bank containing the running firmware, and the inactive bank which we use for update. Each module is updated in a staged process. First, the inactive bank is erased, preparing the device for update. Second, the contents of the component are copied to the inactive portion of the flash. After all components are updated, the driver signals the device to switch the active bank during the next EMP reset (which would usually occur during the next reboot). Although the firmware AdminQ interface does report an immediate status for each command, the NVM erase and NVM write commands receive status asynchronously. The driver must not continue writing until previous erase and write commands have finished. The real status of the NVM commands is returned over the receive AdminQ. Implement a simple interface that uses a wait queue so that the main update thread can sleep until the completion status is reported by firmware. For erasing the inactive banks, this can take quite a while in practice. To help visualize the process to the devlink application and other applications based on the devlink netlink interface, status is reported via the devlink_flash_update_status_notify. While we do report status after each 4k block when writing, there is no real status we can report during erasing. We simply must wait for the complete module erasure to finish. With this implementation, basic flash update for the ice hardware is supported. Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28ice: add flags indicating pending update of firmware moduleJacob Keller3-0/+24
After a flash update, the pending status of the update can be determined from the device capabilities. Read the appropriate device capability and store whether there is a pending update awaiting a reboot. Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28ice: Add AdminQ commands for FW updateCudzilo, Szymon T5-2/+281
Add structures, identifiers, and helper functions for several AdminQ commands related to performing a firmware update for the ice hardware. These will be used in future code for implementing the devlink .flash_update handler. Signed-off-by: Cudzilo, Szymon T <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28ice: Add support for unified NVM update flow capabilityJacek Naczyk3-0/+11
Extends function parsing response from Discover Device Capability AQC to check if the device supports unified NVM update flow. Signed-off-by: Jacek Naczyk <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: ethernet: mtk_eth_soc: Always call mtk_gmac0_rgmii_adjust() for mt7623René van Dorst1-5/+14
Modify mtk_gmac0_rgmii_adjust() so it can always be called. mtk_gmac0_rgmii_adjust() sets-up the TRGMII clocks. Signed-off-by: René van Dorst <[email protected]> Signed-off-By: David Woodhouse <[email protected]> Tested-by: Frank Wunderlich <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28Merge tag 'mlx5-fixes-2020-07-28' of ↵David S. Miller7-52/+120
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes-2020-07-28 This series introduces some fixes to mlx5 driver. v1->v2: - Drop the "Hold reference on mirred devices" patch, until Or's comments are addressed. - Imporve "Modify uplink state" patch commit message per Or's request. Please pull and let me know if there is any problem. For -Stable: For -stable v4.9 ('net/mlx5e: Fix error path of device attach') For -stable v4.15 ('net/mlx5: Verify Hardware supports requested ptp function on a given pin') For -stable v5.3 ('net/mlx5e: Modify uplink state on interface up/down') For -stable v5.4 ('net/mlx5e: Fix kernel crash when setting vf VLANID on a VF dev') ('net/mlx5: E-switch, Destroy TSAR when fail to enable the mode') For -stable v5.5 ('net/mlx5: E-switch, Destroy TSAR after reload interface') For -stable v5.7 ('net/mlx5: Fix a bug of using ptp channel index as pin index') ==================== Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: lan78xx: replace bogus endpoint lookupJohan Hovold1-87/+30
Drop the bogus endpoint-lookup helper which could end up accepting interfaces based on endpoints belonging to unrelated altsettings. Note that the returned bulk pipes and interrupt endpoint descriptor were never actually used. Instead the bulk-endpoint numbers are hardcoded to 1 and 2 (matching the specification), while the interrupt- endpoint descriptor was assumed to be the third descriptor created by USB core. Try to bring some order to this by dropping the bogus lookup helper and adding the missing endpoint sanity checks while keeping the interrupt- descriptor assumption for now. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: lan78xx: fix transfer-buffer memory leakJohan Hovold1-0/+1
The interrupt URB transfer-buffer was never freed on disconnect or after probe errors. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: [email protected] <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28net: lan78xx: add missing endpoint sanity checkJohan Hovold1-0/+5
Add the missing endpoint sanity check to prevent a NULL-pointer dereference should a malicious device lack the expected endpoints. Note that the driver has a broken endpoint-lookup helper, lan78xx_get_endpoints(), which can end up accepting interfaces in an altsetting without endpoints as long as *some* altsetting has a bulk-in and a bulk-out endpoint. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: [email protected] <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28mlxsw: core: Add support for temperature thresholds reading for QSFP-DD ↵Vadim Pasternak2-10/+23
transceivers Allow QSFP-DD transceivers temperature thresholds reading for hardware monitoring and thermal control. For this type, the thresholds are located in page 02h according to the "Module and Lane Thresholds" description from Common Management Interface Specification. Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-28mlxsw: core: Add ethtool support for QSFP-DD transceiversVadim Pasternak2-2/+21
The Quad Small Form Factor Pluggable Double Density (QSFP-DD) hardware specification defines a form factor that supports up to 400 Gbps in aggregate over an 8x50-Gbps electrical interface. The QSFP-DD supports both optical and copper interfaces. Implementation is based on Common Management Interface Specification; Rev 4.0 May 8, 2019. Table 8-2 "Identifier and Status Summary (Lower Page)" from this spec defines "Id and Status" fields located at offsets 00h - 02h. Bit 2 at offset 02h ("Flat_mem") specifies QSFP EEPROM memory mode, which could be "upper memory flat" or "paged". Flat memory mode is coded "1", and indicates that only page 00h is implemented in EEPROM. Paged memory is coded "0" and indicates that pages 00h, 01h, 02h, 10h and 11h are implemented. Pages 10h and 11h are currently not supported by the driver. "Flat" memory mode is used for the passive copper transceivers. For this type only page 00h (256 bytes) is available. "Paged" memory is used for the optical transceivers. For this type pages 00h (256 bytes), 01h (128 bytes) and 02h (128 bytes) are available. Upper page 01h contains static advertising field, while upper page 02h contains the module-defined thresholds and lane-specific monitors. Extend enumerator 'mlxsw_reg_mcia_eeprom_module_info_id' with additional field 'MLXSW_REG_MCIA_EEPROM_MODULE_INFO_TYPE_ID'. This field is used to indicate for QSFP-DD transceiver type which memory mode is to be used. Expose 256 bytes buffer for QSFP-DD passive copper transceiver and 512 bytes buffer for optical. Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.