aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-08-03ionic: separate interrupt for Tx and RxShannon Nelson5-27/+182
Add the capability to split the Tx queues onto their own interrupts with their own napi contexts. This gives the opportunity for more direct control of Tx interrupt handling, such as CPU affinity and interrupt coalescing, useful for some traffic loads. v2: use ethtool -L, not a vendor specific priv-flag v3: simplify logging, drop unnecessary "no-change" tests Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-03ionic: tx separate servicingShannon Nelson3-56/+53
We give the tx clean path its own budget and service routine in order to give a little more leeway to be more aggressive, and in preparation for coming changes. We've found this gives us a little better performance in some packet processing scenarios without hurting other scenarios. Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-03ionic: use fewer firmware doorbells on rx fillShannon Nelson1-10/+5
We really don't need to hit the Rx queue doorbell so many times, we can wait to the end and cause a little less thrash. Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-03net: mvpp2: fix memory leak in mvpp2_rxLorenzo Bianconi1-0/+1
Release skb memory in mvpp2_rx() if mvpp2_rx_refill routine fails Fixes: b5015854674b ("net: mvpp2: fix refilling BM pools in RX path") Signed-off-by: Lorenzo Bianconi <[email protected]> Acked-by: Matteo Croce <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-03net: mdio device: use flexible sleeping in reset functionBruno Thomsen1-1/+1
MDIO device reset assert and deassert length was created by usleep_range() but that does not ensure optimal handling of all the different values from device tree properties. By switching to the new flexible sleeping helper function, fsleep(), the correct delay function is called depending on delay length, e.g. udelay(), usleep_range() or msleep(). Signed-off-by: Bruno Thomsen <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-03net: mdiobus: add reset-post-delay-us handlingBruno Thomsen1-0/+2
Load new "reset-post-delay-us" value from MDIO properties, and if configured to a greater then zero delay do a flexible sleeping delay after MDIO bus reset deassert. This allows devices to exit reset state before start bus communication. Signed-off-by: Bruno Thomsen <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-03net: mdiobus: use flexible sleeping for reset-delay-usBruno Thomsen1-1/+1
MDIO bus reset pulse width is created by using udelay() and that function might not be optimal depending on device tree value. By switching to the new fsleep() helper the correct delay function is called depending on delay length, e.g. udelay(), usleep_range() or msleep(). Signed-off-by: Bruno Thomsen <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-03net/mlx5: Delete extra dump stack that gives nothingLeon Romanovsky1-6/+3
The WARN_*() macros are intended to catch impossible situations from the SW point of view. They gave a little in case HW<->SW interface is out-of-sync. Such out-of-sync scenario can be due to SW errors that are not part of this flow or because some HW errors, where dump stack won't help either. This specific WARN_ON() is useless because mlx5_core code is prepared to handle such situations and will unfold everything correctly while providing enough information to the users to understand why FS is not working. WARNING: CPU: 0 PID: 3222 at drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825 connect_fts_in_prio.isra.20+0x1dd/0x260 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 3222 Comm: syz-executor861 Not tainted 5.5.0-rc6+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack linux/lib/dump_stack.c:77 [inline] dump_stack+0x94/0xce linux/lib/dump_stack.c:118 panic+0x234/0x56f linux/kernel/panic.c:221 __warn+0x1cc/0x1e1 linux/kernel/panic.c:582 report_bug+0x200/0x310 linux/lib/bug.c:195 fixup_bug.part.11+0x32/0x80 linux/arch/x86/kernel/traps.c:174 fixup_bug linux/arch/x86/kernel/traps.c:273 [inline] do_error_trap+0xd3/0x100 linux/arch/x86/kernel/traps.c:267 do_invalid_op+0x31/0x40 linux/arch/x86/kernel/traps.c:286 invalid_op+0x1e/0x30 linux/arch/x86/entry/entry_64.S:1027 RIP: 0010:connect_fts_in_prio.isra.20+0x1dd/0x260 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825 Code: 00 00 48 c7 c2 60 8c 31 84 48 c7 c6 00 81 31 84 48 8b 38 e8 3c a8 cb ff 41 83 fd 01 8b 04 24 0f 8e 29 ff ff ff e8 83 7b bc fe <0f> 0b 8b 04 24 e9 1a ff ff ff 89 04 24 e8 c1 20 e0 fe 8b 04 24 eb RSP: 0018:ffffc90004bb7858 EFLAGS: 00010293 RAX: ffff88805de98e80 RBX: 0000000000000c96 RCX: ffffffff827a853d RDX: 0000000000000000 RSI: 0000000000000000 RDI: fffff52000976efa RBP: 0000000000000007 R08: ffffed100da060e3 R09: ffffed100da060e3 R10: 0000000000000001 R11: ffffed100da060e2 R12: dffffc0000000000 R13: 0000000000000002 R14: ffff8880683a1a10 R15: ffffed100d07bc1c connect_prev_fts linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:844 [inline] connect_flow_table linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:975 [inline] __mlx5_create_flow_table+0x8f8/0x1710 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1064 mlx5_create_flow_table linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1094 [inline] mlx5_create_auto_grouped_flow_table+0xe1/0x210 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1136 _get_prio linux/drivers/infiniband/hw/mlx5/main.c:3286 [inline] get_flow_table+0x2ea/0x760 linux/drivers/infiniband/hw/mlx5/main.c:3376 mlx5_ib_create_flow+0x331/0x11c0 linux/drivers/infiniband/hw/mlx5/main.c:3896 ib_uverbs_ex_create_flow+0x13e8/0x1b40 linux/drivers/infiniband/core/uverbs_cmd.c:3311 ib_uverbs_write+0xaa5/0xdf0 linux/drivers/infiniband/core/uverbs_main.c:769 __vfs_write+0x7c/0x100 linux/fs/read_write.c:494 vfs_write+0x168/0x4a0 linux/fs/read_write.c:558 ksys_write+0xc8/0x200 linux/fs/read_write.c:611 do_syscall_64+0x9c/0x390 linux/arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45a059 Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcc17564c98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fcc17564ca0 RCX: 000000000045a059 RDX: 0000000000000030 RSI: 00000000200003c0 RDI: 0000000000000005 RBP: 0000000000000007 R08: 0000000000000002 R09: 0000000000003131 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006e636c R13: 0000000000000000 R14: 00000000006e6360 R15: 00007ffdcbdaf6a0 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds.. Fixes: f90edfd279f3 ("net/mlx5_core: Connect flow tables") Reviewed-by: Maor Gottlieb <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2020-08-03net/mlx5: convert to new udp_tunnel infrastructureJakub Kicinski5-136/+64
Allocate nic_info dynamically - n_entries is not constant. Attach the tunnel offload info only to the uplink representor. We expect the "main" netdev to be unregistered in switchdev mode, and there to be only one uplink representor. Drop the udp_tunnel_drop_rx_info() call, it was not there until commit b3c2ed21c0bd ("net/mlx5e: Fix VXLAN configuration restore after function reload") so the device doesn't need it, and core should handle reloads and reset just fine. v2: - don't drop the ndos on reprs, and register info on uplink repr. v4: - Move netdev tunnel structure handling to en_main.c Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-08-03net/mlx5: DR, Change push vlan action sequenceAlex Vesker1-21/+21
The DR TX state machine supports the following order: modify header, push vlan and encapsulation. Instead fs_dr would pass: push vlan, modify header and encapsulation. The above caused the rule creation to fail on invalid action sequence provided error. Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Alex Vesker <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-08-03net/mlx5e: Enable users to change VF/PF representors carrier stateParav Pandit1-0/+24
Currently PF and VF representor netdevice carrier is always controlled by controlling the representor netdevice device state as up/down. Representor netdevice state change undergoes one or more txq/rxq destroy/create commands to firmware, skb and its rx buffer allocation, health reporters creation and more. Due to this limitation users do not have the ability to just change the carrier of the non uplink representors without modifying the device state. In one use case when the eswitch physical port carrier is down/up, user needs to update the VF link state to same as physical port carrier. Example of updating VF representor carrier state: $ ip link set enp0s8f0npf0vf0 carrier off $ ip link set enp0s8f0npf0vf0 carrier on This enhancement results into VF link state change which is represented by the VF representor netdevice carrier. This enables users to modify the representor carrier without modifying the representor netdevice state. A simple test is run using [1] to calculate the time difference between updating carrier vs updating device state (to update just the carrier) with one VF to simulate 255 VFs. Time taken to update the carrier using device up/down: $ time ./calculate.sh dev enp0s8f0npf0vf0 real 0m30.913s user 0m0.200s sys 0m11.168s Time taken to update just the carrier using carrier iproute2 command: $ time ./calculate.sh carrier enp0s8f0npf0vf0 real 0m2.142s user 0m0.160s sys 0m2.021s Test shows that its better to use carrier on/off user interface to notify link up/down event to VF compare to device up/down interface, because carrier user interface delivers the same event 15 times faster. [1] https://github.com/paravmellanox/myscripts/blob/master/calculate_carrier_time.sh Signed-off-by: Parav Pandit <[email protected]> Acked-by: Jiri Pirko <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-08-02brcmfmac: Set timeout value when configuring power saveNicolas Saenz Julienne1-0/+8
Set the timeout value as per cfg80211's set_power_mgmt() request. If the requested value value is left undefined we set it to 2 seconds, the maximum supported value. Signed-off-by: Nicolas Saenz Julienne <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02wl1251: fix always return 0 errorWang Hai1-1/+1
wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed4d4b ("wl1251: retry power save entry") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hai <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02airo: use generic power managementVaibhav Gupta1-20/+19
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02intersil: fix wiki website urlFlavio Suligoi5-7/+8
In some Intersil files, the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02qtnfmac: Missing platform_device_unregister() on error in qtnf_core_mac_alloc()Wang Hai1-1/+4
Add the missing platform_device_unregister() before return from qtnf_core_mac_alloc() in the error handling case. Fixes: 616f5701f4ab ("qtnfmac: assign each wiphy to its own virtual platform device") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hai <[email protected]> Reviewed-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02ipw2x00: switch from 'pci_' to 'dma_' APIChristophe JAILLET2-89/+88
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ipw2100_msg_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_msg_allocate Moreover, 'ipw2100_msg_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'status_queue_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_rx_allocate --> status_queue_allocate Moreover, 'ipw2100_rx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'bd_queue_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_rx_allocate --> bd_queue_allocate Moreover, 'ipw2100_rx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'ipw2100_tx_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_tx_allocate Moreover, 'ipw2100_tx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'ipw_queue_tx_init()' (ipw2200.c), GFP_KERNEL can be used because it is called from a call chain that already uses GFP_KERNEL and no spin_lock is taken in the between. The call chain is: ipw_up --> ipw_load --> ipw_queue_reset --> ipw_queue_tx_init 'ipw_up()' already uses GFP_KERNEL for some other memory allocations. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02ipw2100: Use GFP_KERNEL instead of GFP_ATOMIC in some memory allocationChristophe JAILLET1-1/+1
The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_tx_allocate No lock is taken in the between. So it is safe to use GFP_KERNEL in 'ipw2100_tx_allocate()'. BTW, 'ipw2100_queues_allocate()' also calls 'ipw2100_msg_allocate()' which already allocates some memory using GFP_KERNEL. Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02hostap: use generic power managementVaibhav Gupta2-27/+13
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions as through the generic framework, PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02b43legacy: Replace HTTP links with HTTPS onesAlexander A. Klimov3-12/+12
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02b43: Replace HTTP links with HTTPS onesAlexander A. Klimov9-96/+96
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02ipw2x00: Replace HTTP links with HTTPS onesAlexander A. Klimov1-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rt2x00: pci: use generic power managementVaibhav Gupta10-46/+19
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. The callbacks make use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use dev_get_drvdata() to get drv data. The .suspend() callback is invoking rt2x00lib_suspend() which needs to be modified as generic rt2x00pci_suspend() has no pm_message_t type argument, passed to it, which is required by it according to its declaration. Although this variable remained unused in the function body. Hence, remove it from the function definition & declaration. rt2x00lib_suspend() is also invoked by rt2x00usb_suspend() and rt2x00soc_suspend(). Thus, modify the functional call accordingly in their function body. Earlier, .suspend() & .resume() were exported and were used by the following drivers: - drivers/net/wireless/ralink/rt2x00/rt2400pci.c - drivers/net/wireless/ralink/rt2x00/rt2500pci.c - drivers/net/wireless/ralink/rt2x00/rt2800pci.c - drivers/net/wireless/ralink/rt2x00/rt61pci.c Now, we only need to bind "struct dev_pm_ops" variable to "struct pci_driver". Thus, make the callbacks static. Declare an "extern const struct dev_pm_ops" variable and bind PM callbacks to it. Now, export the variable instead and use it in respective drivers. Compile-tested only. Signed-off-by: Vaibhav Gupta <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02wilc1000: Move wilc1000 SDIO ID's from driver source to common header fileAjay Singh1-4/+2
Moved macros used for Vendor/Device ID from wilc1000 driver to common header file and changed macro name for consistency with other macros. Signed-off-by: Ajay Singh <[email protected]> Acked-by: Ulf Hansson <[email protected]> Acked-by: Pali Rohár <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02mt7601u: add missing release on skb in mt7601u_mcu_msg_sendNavid Emamdoost1-1/+3
In the implementation of mt7601u_mcu_msg_send(), skb is supposed to be consumed on all execution paths. Release skb before returning if test_bit() fails. Signed-off-by: Navid Emamdoost <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02iwlwifi: yoyo: don't print failure if debug firmware is missingWolfram Sang1-1/+1
Missing this firmware is not fatal, my wifi card still works. Even more, I couldn't find any documentation what it is or where to get it. So, I don't think the users should be notified if it is missing. If you browse the net, you see the message is present is in quite some logs. Better remove it. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: 8821c: coex: add functions and parametersPing-Cheng Chen3-0/+430
Without this patch, RTL8821CE will not have coex support, and will crash the system because of the NULL pointers for the coex functions. While RTL8822C series are WiFi + BT combo chips, it needs the co-existence mechanism for the device to work on both WiFi and BT without interfering each other. And the coex support has already been added before, most of the mechanisms are implemented. The driver should just add corresponding functions to operate on different types of chips and its coex parameters. Fixes: f745eb9ca5bf ("rtw88: 8821c: Add 8821CE to Kconfig and Makefile") Signed-off-by: Ping-Cheng Chen <[email protected]> Signed-off-by: Tzu-En Huang <[email protected]> Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: 8821c: make symbol 'rtw8821c_rtw_pwr_track_tbl' staticWei Yongjun1-1/+1
The sparse tool complains as follows: drivers/net/wireless/realtek/rtw88/rtw8821c.c:1374:32: warning: symbol 'rtw8821c_rtw_pwr_track_tbl' was not declared. Should it be static? This variable is not used outside of rtw8821c.c, so this commit marks it static. Fixes: 3a4312828ce1 ("rtw88: 8821c: add power tracking") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: add h2c command in debugfsTzu-En Huang3-0/+37
It's very useful to send H2C command for debug usage. Add an entry for sending H2C command to firmware. usage example: echo 42,00,00,43,02,00,00,00 > /sys/kernel/debug/ieee80211/phyX/rtw88 Signed-off-by: Tzu-En Huang <[email protected]> Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: allows driver to enable/disable beaconYan-Hsuan Chuang1-0/+9
Enable/disable beacon accordingly when the BSS info changed. Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: add ieee80211_ops::change_interfaceYan-Hsuan Chuang1-0/+18
Sometimes mac80211 will just ask driver to change the interface instead of to remove and then add a new one. And for driver, to change the interface is just simply to remove and add a new one but change the type of it. Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: coex: only skip coex triggered by BT infoYan-Hsuan Chuang1-1/+2
The coex mechanism used to skip upon the freeze flag is raised. That will cause the coex mechanism being skipped unexpectedly. Coex only wanted to keep the TDMA table from being changed by BT side. So, check the freeze and reason, if the coex reason is coming from BT info, skip it, to make sure the coex triggered by Wifi itself can work. This is required for the AP mode, while the control flow is different with STA mode. When starting an AP mode, the AP mode needs to start working immedaitely after leaving IPS, and the freeze flag could be raised. If the coex info is skipped, then the AP mode will not set the antenna owner, leads to TX stuck. Fixes: 4136214f7c46 ("rtw88: add BT co-existence support") Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: update tx descriptor of mgmt and reserved page packetsTzu-En Huang4-39/+90
Previous settings for TX descriptors of and reserved page packets are insufficient. For the sequence number of packets downloaded to reserved page, it should be filled by hardware. And for ps-poll packets in reserved page, to prevent AID being changed by hardware, NAVUSEHDR should be set. Additionally, the rate should be adjusted based on the current band for mgmt and reserved page packets. Signed-off-by: Tzu-En Huang <[email protected]> Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: fix short GI capability based on current bandwidthTsang-Shian Lin1-5/+6
Fix the transmission is not sent with short GI under some conditions even if the receiver supports short GI. If VHT capability IE exists in the beacon, the original code uses the short GI for 80M field as driver's short GI setting for transmission, even the current bandwidth is not 80MHz. Short GI supported fields for 20M/40M are informed in HT capability information element, and short GI supported field for 80M is informed in VHT capability information element. These three fields may be set to different values. Driver needs to record each short GI support field for each bandwidth, and send correct info depends on current bandwidth to the WiFi firmware. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <[email protected]> Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtw88: fix LDPC field for RA infoTsang-Shian Lin1-1/+1
Convert the type of LDPC field to boolen because LDPC field of RA info H2C command to firmware is only one bit. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <[email protected]> Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02prism54: switch from 'pci_' to 'dma_' APIChristophe JAILLET4-41/+36
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'islpci_alloc_memory()' (islpci_dev.c), GFP_KERNEL can be used because it is only called from a probe function and no spin_lock is taken in the between. The call chain is: prism54_probe (probe function, in 'islpci_hotplug.c') --> islpci_setup (in 'islpci_dev.c') --> islpci_alloc_memory (in 'islpci_dev.c') @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02prism54: islpci_hotplug: use generic power managementVaibhav Gupta1-23/+11
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions as through the generic framework, PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02prism54: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02p54: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-30/+35
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'p54p_probe()', GFP_KERNEL can be used because it is the probe function and no spin_lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02mwifiex: 11n_rxreorder: Remove unnecessary cast in kfree()Xu Wang1-1/+1
Remove unnecassary casts in the argument to kfree. Signed-off-by: Xu Wang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtlwifi: btcoex: use %*ph to print small bufferAndy Shevchenko1-4/+2
Use %*ph format to print small buffer as hex string. Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02rtlwifi: btcoex: remove redundant initialization of variables ant_num and ↵Colin Ian King1-1/+1
single_ant_path The variables ant_num and single_ant_path are being initialized with a value that is never read and are being updated later with a new value. The initializations are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Acked-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-02Merge tag 'mt76-for-kvalo-2020-07-21' of https://github.com/nbd168/wirelessKalle Valo62-846/+4691
mt76 patches for 5.9 * locking fixes * tx queue mapping fixes for 7615/7915 * ARP filter offload for 7663 * runtime power management for 7663 * testmode support for mfg calibration * memory leak fixes * support for more channels # gpg: Signature made Tue 21 Jul 2020 08:01:28 PM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <[email protected]>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller35-261/+377
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <[email protected]>
2020-08-01vxlan: fix memleak of fdbTaehee Yoo1-2/+4
When vxlan interface is deleted, all fdbs are deleted by vxlan_flush(). vxlan_flush() flushes fdbs but it doesn't delete fdb, which contains all-zeros-mac because it is deleted by vxlan_uninit(). But vxlan_uninit() deletes only the fdb, which contains both all-zeros-mac and default vni. So, the fdb, which contains both all-zeros-mac and non-default vni will not be deleted. Test commands: ip link add vxlan0 type vxlan dstport 4789 external ip link set vxlan0 up bridge fdb add to 00:00:00:00:00:00 dst 172.0.0.1 dev vxlan0 via lo \ src_vni 10000 self permanent ip link del vxlan0 kmemleak reports as follows: unreferenced object 0xffff9486b25ced88 (size 96): comm "bridge", pid 2151, jiffies 4294701712 (age 35506.901s) hex dump (first 32 bytes): 02 00 00 00 ac 00 00 01 40 00 09 b1 86 94 ff ff ........@....... 46 02 00 00 00 00 00 00 a7 03 00 00 12 b5 6a 6b F.............jk backtrace: [<00000000c10cf651>] vxlan_fdb_append.part.51+0x3c/0xf0 [vxlan] [<000000006b31a8d9>] vxlan_fdb_create+0x184/0x1a0 [vxlan] [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan] [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan] [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270 [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490 [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110 [<00000000dff433e7>] netlink_unicast+0x18e/0x250 [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400 [<000000002ed55153>] ____sys_sendmsg+0x237/0x260 [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0 [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80 [<00000000a8f875d2>] do_syscall_64+0x56/0xe0 [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff9486b1c40080 (size 128): comm "bridge", pid 2157, jiffies 4294701754 (age 35506.866s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f8 dc 42 b2 86 94 ff ff ..........B..... 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<00000000a2981b60>] vxlan_fdb_create+0x67/0x1a0 [vxlan] [<0000000049399045>] vxlan_fdb_update+0x12f/0x220 [vxlan] [<0000000090b1ef00>] vxlan_fdb_add+0x12a/0x1b0 [vxlan] [<0000000056633c2c>] rtnl_fdb_add+0x187/0x270 [<00000000dd5dfb6b>] rtnetlink_rcv_msg+0x264/0x490 [<00000000fc44dd54>] netlink_rcv_skb+0x4a/0x110 [<00000000dff433e7>] netlink_unicast+0x18e/0x250 [<00000000b87fb421>] netlink_sendmsg+0x2e9/0x400 [<000000002ed55153>] ____sys_sendmsg+0x237/0x260 [<00000000faa51c66>] ___sys_sendmsg+0x88/0xd0 [<000000006c3982f1>] __sys_sendmsg+0x4e/0x80 [<00000000a8f875d2>] do_syscall_64+0x56/0xe0 [<000000003610eefa>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 3ad7a4b141eb ("vxlan: support fdb and learning in COLLECT_METADATA mode") Signed-off-by: Taehee Yoo <[email protected]> Acked-by: Roopa Prabhu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-01ice: Misc minor fixesTony Nguyen9-18/+14
This is a collection of minor fixes including typos, white space, and style. No functional changes. Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]>
2020-08-01ice: adjust profile ID map locksVictor Raj1-45/+45
The profile ID map lock should be held till the caller completes all references of that profile entries. The current code releases the lock right after the match search. This caused a driver issue when the profile map entries were referenced after it was freed in other thread after the lock was released earlier. Signed-off-by: Victor Raj <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-08-01ice: update PTYPE lookup tableTony Nguyen1-0/+314
Update the PTYPE lookup table to reflect values that can be set by the hardware. Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]>
2020-08-01ice: Disable VLAN pruning in promiscuous modeNick Nunley2-0/+10
Disable VLAN pruning when entering promiscuous mode, and re-enable it when exiting. Without this VLAN-over-bridge topologies created on the device won't be functional unless rx-vlan-filter is explicitly disabled with ethtool. Signed-off-by: Nick Nunley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-08-01ice: Graceful error handling in HW table calloc failureSurabhi Boob1-1/+3
In the ice_init_hw_tbls, if the devm_kcalloc for es->written fails, catch that error and bail out gracefully, instead of continuing with a NULL pointer. Fixes: 32d63fa1e9f3 ("ice: Initialize DDP package structures") Signed-off-by: Surabhi Boob <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.