aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-10-29bnxt_en: consolidate fw devlink health reportersEdwin Peer2-51/+21
Merge 'fw' and 'fw_fatal' health reporters. There is no longer a need to distinguish between firmware reporters. Only bonafide errors are reported now and no reports were being generated for the 'fw' reporter. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-29bnxt_en: remove fw_reset devlink health reporterEdwin Peer4-116/+53
Firmware resets initiated by the user are not errors and should not be reported via devlink. Once only unsolicited resets remain, it is no longer sensible to maintain a separate fw_reset reporter. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-29bnxt_en: improve error recovery information messagesEdwin Peer2-9/+13
The recovery election messages are often mistaken for errors. Improve the wording to clarify the meaning of these frequent and expected events. Also, take the first step towards more inclusive language. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-29bnxt_en: add enable_remote_dev_reset devlink parameterEdwin Peer5-4/+111
The reported parameter value should not take into account the state of remote drivers. Firmware will reject remote resets as appropriate, thus it is not strictly necessary to check HOT_RESET_ALLOWED before attempting to initiate a reset. But we add the check so that we can provide more intuitive messages when reset is not permitted. This firmware setting needs to be restored from all functions after a firmware reset. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-29bnxt_en: implement devlink dev reload fw_activateEdwin Peer6-4/+80
Similar to reload driver_reinit, the RTNL lock is held across reload down and up to prevent interleaving state changes. But we need to subsequently release the RTNL lock while waiting for firmware reset to complete. Also keep a statistic on fw_activate resets initiated remotely from other functions. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-29bnxt_en: implement devlink dev reload driver_reinitEdwin Peer5-11/+110
The RTNL lock must be held between down and up to prevent interleaving state changes, especially since external state changes might release and allocate different driver resource subsets that would otherwise need to be tracked and carefully handled. If the down function fails, then devlink will not call the corresponding up function, thus the lock is released in the down error paths. v2: Don't use devlink_reload_disable() and devlink_reload_enable(). Instead, check that the netdev is not in unregistered state before proceeding with reload. Signed-off-by: Edwin Peer <[email protected]> Signed-Off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-29bnxt_en: refactor cancellation of resource reservationsEdwin Peer2-19/+29
Resource reservations will also need to be reset after FUNC_DRV_UNRGTR in the following devlink driver_reinit patch. Extract this logic into a reusable function. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-29bnxt_en: refactor printing of device infoEdwin Peer2-55/+63
The device info logged during probe will be reused by the devlink driver_reinit code in a following patch. Extract this logic into the new bnxt_print_device_info() function. The board index needs to be saved in the driver context so that the board information can be retrieved at a later time, outside of the probe function. Reviewed-by: Somnath Kotur <[email protected]> Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28mlxsw: spectrum_qdisc: Offload root TBF as port shaperPetr Machata1-18/+37
The Spectrum ASIC allows configuration of maximum shaper on all levels of the scheduling hierarchy: TCs, subgroups, groups and also ports. Currently, TBF always configures a subgroup. But a user could reasonably express the intent to configure port shaper by putting TBF to a root position, around ETS / PRIO. Accept this usage and offload appropriately. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-28ice: fix error return code in ice_get_recp_frm_fw()Wang Hai1-1/+3
Return error code if devm_kmemdup() fails in ice_get_recp_frm_fw() Fixes: fd2a6b71e300 ("ice: create advanced switch recipe") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hai <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28ice: Fix clang -Wimplicit-fallthrough in ice_pull_qvec_from_rc()Nathan Chancellor1-0/+1
Clang warns: drivers/net/ethernet/intel/ice/ice_lib.c:1906:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] default: ^ drivers/net/ethernet/intel/ice/ice_lib.c:1906:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 error generated. Clang is a little more pedantic than GCC, which does not warn when falling through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to silence the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1482 Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28ice: Add support to print error on PHY FW load failureBrett Creeley3-5/+47
Some devices have support for loading the PHY FW and in some cases this can fail. When this fails, the FW will set the corresponding bit in the link info structure. Also, the FW will send a link event if the correct link event mask bit is set. Add support for printing an error message when the PHY FW load fails during any link configuration flow and the link event flow. Since ice_check_module_power() is already doing something very similar add a new function ice_check_link_cfg_err() so any failures reported in the link info's link_cfg_err member can be printed in this one function. Also, add the new ICE_FLAG_PHY_FW_LOAD_FAILED bit to the PF's flags so we don't constantly print this error message during link polling if the value never changed. Signed-off-by: Brett Creeley <[email protected]> Tested-by: Sunitha Mekala <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28ice: Add support for changing MTU on PR in switchdev modeMarcin Szycik1-0/+3
This change adds support for changing MTU on port representor in switchdev mode, by setting the min/max MTU values on port representor netdev. Before it was possible to change the MTU only in a limited, default range (68-1500). Signed-off-by: Marcin Szycik <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28ice: send correct vc status in switchdevMichal Swiatkowski1-14/+49
Part of virtchannel messages are treated in different way in switchdev mode to block configuring VFs from iavf driver side. This blocking was done by doing nothing and returning success, event without sending response. Not sending response for opcodes that aren't supported in switchdev mode leads to block iavf driver message handling. This happens for example when vlan is configured at VF config time (VLAN module is already loaded). To get rid of it ice driver should answer for each VF message. In switchdev mode: - for adding/deleting VLAN driver should answer success without doing anything to allow creating vlan device on VFs - for enabling/disabling VLAN stripping and promiscuous mode driver should answer not supported, this feature in switchdev can be only set from host side Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28ice: support for GRE in eswitchMichal Swiatkowski5-14/+161
Mostly reuse code from Geneve and VXLAN in TC parsing code. Add new GRE header to match on correct fields. Create new dummy packets with GRE fields. Instead of checking if any encap values are presented in TC flower, check if device is tunnel type or redirect is to tunnel device. This will allow adding all combination of rules. For example filters only with inner fields. Return error in case device isn't tunnel but encap values are presented. gre example: - create tunnel device ip l add $NVGRE_DEV type gretap remote $NVGRE_REM_IP local $VF1_IP \ dev $PF - add tc filter (in switchdev mode) tc filter add dev $NVGRE_DEV protocol ip parent ffff: flower dst_ip \ $NVGRE1_IP action mirred egress redirect dev $VF1_PR Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28ice: low level support for tunnelsMichal Swiatkowski5-16/+298
Add definition of UDP tunnel dummy packets. Fill destination port value in filter based on UDP tunnel port. Append tunnel flags to switch filter definition in case of matching the tunnel. Both VXLAN and Geneve are UDP tunnels, so only one new header is needed. Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28ice: VXLAN and Geneve TC supportMichal Swiatkowski5-44/+362
Add definition for VXLAN and Geneve dummy packet. Define VXLAN and Geneve type of fields to match on correct UDP tunnel header. Parse tunnel specific fields from TC tool like outer MACs, outer IPs, outer destination port and VNI. Save values and masks in outer header struct and move header pointer to inner to simplify parsing inner values. There are two cases for redirect action: - from uplink to VF - TC filter is added on tunnel device - from VF to uplink - TC filter is added on PR, for this case check if redirect device is tunnel device VXLAN example: - create tunnel device ip l add $VXLAN_DEV type vxlan id $VXLAN_VNI dstport $VXLAN_PORT \ dev $PF - add TC filter (in switchdev mode) tc filter add dev $VXLAN_DEV protocol ip parent ffff: flower \ enc_dst_ip $VF1_IP enc_key_id $VXLAN_VNI action mirred egress \ redirect dev $VF1_PR Geneve example: - create tunnel device ip l add $GENEVE_DEV type geneve id $GENEVE_VNI dstport $GENEVE_PORT \ remote $GENEVE_IP - add TC filter (in switchdev mode) tc filter add dev $GENEVE_DEV protocol ip parent ffff: flower \ enc_key_id $GENEVE_VNI dst_ip $GENEVE1_IP action mirred egress \ redirect dev $VF1_PR Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28ice: support for indirect notificationMichal Swiatkowski3-2/+200
Implement indirect notification mechanism to support offloading TC rules on tunnel devices. Keep indirect block list in netdev priv. Notification will call setting tc cls flower function. For now we can offload only ingress type. Return not supported for other flow block binder. Signed-off-by: Michal Swiatkowski <[email protected]> Acked-by: Paul Menzel <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski22-191/+326
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-28Revert "net: hns3: fix pause config problem after autoneg disabled"Guangbin Huang5-57/+10
This reverts commit 3bda2e5df476417b6d08967e2d84234a59d57b1c. According to discussion with Andrew as follow: https://lore.kernel.org/netdev/[email protected]/ HNS3 driver needs to separate pause autoneg from general autoneg, so revert this incorrect patch. Signed-off-by: Guangbin Huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-28net: virtio: use eth_hw_addr_set()Jakub Kicinski1-3/+7
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Even though the current code uses dev->addr_len the we can switch to eth_hw_addr_set() instead of dev_addr_set(). The netdev is always allocated by alloc_etherdev_mq() and there are at least two places which assume Ethernet address: - the line below calling eth_hw_addr_random() - virtnet_set_mac_address() -> eth_commit_mac_addr_change() Acked-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-28octeontx2-af: debugfs: Add channel and channel mask.Rakesh Babu3-0/+9
This patch is to dispaly channel and channel_mask for each RX interface of NPC MCAM rule. Signed-off-by: Rakesh Babu <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: cn10k: debugfs for dumping LMTST map tableHarman Kalra1-0/+94
CN10k SoCs use atomic stores of up to 128 bytes to submit packets/instructions into co-processor cores. The enqueueing is performed using Large Memory Transaction Store (LMTST) operations. They allow for lockless enqueue operations - i.e., two different CPU cores can submit instructions to the same queue without needing to lock the queue or synchronize their accesses. This patch implements a new debugfs entry for dumping LMTST map table present on CN10K, as this might be very useful to debug any issue in case of shared LMTST region among multiple pci functions. Signed-off-by: Harman Kalra <[email protected]> Signed-off-by: Bhaskara Budiredla <[email protected]> Signed-off-by: Rakesh Babu <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: debugfs: Minor changes.Rakesh Babu Saladi1-11/+11
Few changes in rvu_debugfs.c file to remove unwanted characters, indenting the code, added a new comment line etc. Signed-off-by: Rakesh Babu Saladi <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: Fix possible null pointer dereference.Rakesh Babu Saladi2-1/+4
This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c" Fixes: 8756828a8148 ("octeontx2-af: Add NPA aura and pool contexts to debugfs") Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by: Rakesh Babu Saladi <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: Display all enabled PF VF rsrc_alloc entries.Rakesh Babu1-32/+106
Currently, we are using a fixed buffer size of length 2048 to display rsrc_alloc output. As a result a maximum of 2048 characters of rsrc_alloc output is displayed, which may lead sometimes to display only partial output. This patch fixes this dependency on max limit of buffer size and displays all PF VF entries. Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12 characters to print the list of LFs of each block for a PF/VF. If the length of list of LFs of a block exceeds this fixed width then the list gets truncated and displays only a part of the list. This patch fixes this by using the maximum possible length of list of LFs among all blocks of all PFs and VFs entries as the width size. Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.") Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status") Signed-off-by: Rakesh Babu <[email protected]> Signed-off-by: Nithin Dabilpuram <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28octeontx2-af: Check whether ipolicers existsSubbaraya Sundeep1-0/+8
While displaying ingress policers information in debugfs check whether ingress policers exist in the hardware or not because some platforms(CN9XXX) do not have this feature. Fixes: e7d8971763f3 ("octeontx2-af: cn10k: Debugfs support for bandwidth") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Rakesh Babu <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: ethernet: microchip: lan743x: Fix skb allocation failureYuiko Oshino1-4/+9
The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances. GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: phy: microchip_t1: add cable test support for lan87xx phyYuiko Oshino1-0/+239
Add a basic cable test (diagnostic) support for lan87xx phy. Tested with LAN8770 for connected/open/short wires using ethtool. Signed-off-by: Yuiko Oshino <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28sky2: Remove redundant assignment and parenthesesluo penghao1-1/+1
The variable err will be reassigned on subsequent branches, and this assignment does not perform related value operations. This will cause the double parentheses to be redundant, so the inner parentheses should be deleted. clang_analyzer complains as follows: drivers/net/ethernet/marvell/sky2.c:4988: warning: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'. Changes in v2: modify title category:octeontx2-af to sky2. delete the inner parentheses. Reported-by: Zeal Robot <[email protected]> Signed-off-by: luo penghao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28Merge tag 'iwlwifi-next-for-kalle-2021-10-28' of ↵Kalle Valo26-401/+804
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v5.16 * Support a new ACPI table revision; * Improvements in the device selection code; * New HW support; * Some fixes in the Geographic SAR implementation; * Support for WiFi 6E enablement via BIOS; * Support FW API version 67; * Improve debugging support; * Some fixes in session protection; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Thu 28 Oct 2021 12:11:27 PM EEST # gpg: using RSA key 1772CD7E06F604F5A6EBCB26A1479CA21A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <[email protected]>" [full] # gpg: aka "Luciano Roth Coelho (Intel) <[email protected]>" [full]
2021-10-28mwifiex: fix division by zero in fw download pathJohan Hovold1-0/+16
Add the missing endpoint sanity checks to probe() to avoid division by zero in mwifiex_write_data_sync() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Only add checks for the firmware-download boot stage, which require both command endpoints, for now. The driver looks like it will handle a missing endpoint during normal operation without oopsing, albeit not very gracefully as it will try to submit URBs to the default pipe and fail. Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Cc: [email protected] # 3.5 Cc: Amitkumar Karwar <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-28rsi: fix control-message timeoutJohan Hovold1-1/+1
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Use the common control-message timeout define for the five-second timeout. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: [email protected] # 3.15 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-28rtl8187: fix control-message timeoutsJohan Hovold1-7/+7
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 605bebe23bf6 ("[PATCH] Add rtl8187 wireless driver") Cc: [email protected] # 2.6.23 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo21-100/+403
ath.git patches for v5.16. Major changes: ath11k * fix QCA6390 A-MSDU handling (CVE-2020-24588) wcn36xx * enable hardware scan offload for 5Ghz band * add missing 5GHz channels 136 and 144
2021-10-28Merge tag 'mlx5-net-next-5.15-rc7' of ↵David S. Miller17-79/+108
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Merge mlx5-next into net-next ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-28nfp: bpf: relax prog rejection for mtu check through max_pkt_offsetYu Xiao3-9/+26
MTU change is refused whenever the value of new MTU is bigger than the max packet bytes that fits in NFP Cluster Target Memory (CTM). However, an eBPF program doesn't always need to access the whole packet data. The maximum direct packet access (DPA) offset has always been caculated by verifier and stored in the max_pkt_offset field of prog aux data. Signed-off-by: Yu Xiao <[email protected]> Reviewed-by: Yinjun Zhang <[email protected]> Reviewed-by: Niklas Soderlund <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: mvpp2: clean up mvpp2_phylink_validate()Russell King (Oracle)1-10/+7
mvpp2_phylink_validate() no longer needs to check for PHY_INTERFACE_MODE_NA as phylink will walk the supported interface types to discover the link mode capabilities. Remove these checks. Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: mvpp2: drop use of phylink_helper_basex_speed()Russell King (Oracle)1-12/+7
Now that we have a better method to select SFP interface modes, we no longer need to use phylink_helper_basex_speed() in a driver's validation function, and we can also get rid of our hack to indicate both 1000base-X and 2500base-X if the comphy is present to make that work. Remove this hack and use of phylink_helper_basex_speed(). Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: mvpp2: remove interface checks in mvpp2_phylink_validate()Russell King (Oracle)1-26/+7
As phylink checks the interface mode against the supported_interfaces bitmap, we no longer need to validate the interface mode in the validation function. Remove this to simplify it. Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28net: mvpp2: populate supported_interfaces memberRussell King1-0/+34
Populate the phy interface mode bitmap for the Marvell mvpp2 driver with interfaces modes supported by the MAC. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28vmxnet3: do not stop tx queues after netif_device_detach()Dongli Zhang1-1/+0
The netif_device_detach() conditionally stops all tx queues if the queues are running. There is no need to call netif_tx_stop_all_queues() again. Signed-off-by: Dongli Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-28Drivers: hv: vmbus: Mark vmbus ring buffer visible to host in Isolation VMTianyu Lan2-10/+10
Mark vmbus ring buffer visible with set_memory_decrypted() when establish gpadl handle. Reviewed-by: Michael Kelley <[email protected]> Signed-off-by: Tianyu Lan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2021-10-28iwlwifi: bump FW API to 67 for AX devicesLuca Coelho1-1/+1
Start supporting API version 67 for AX devices. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211024181719.3c0af5832d23.I7c18858604b72bc15cf2047a91531e4aa7c0527a@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-10-28iwlwifi: mvm: extend session protection on associationJohannes Berg1-21/+43
When we receive an association response, a significant amount of time might have passed since we sent the corresponding association request (mac80211 will wait up to 500ms for the TX and then 100ms for the response after ACK was received). But the time event is touched only when we send the assoc request, so it might not have much time remaining, more easily causing the (dreaded) No beacon heard and the session protection is over already... message. Refactor iwl_mvm_mac_mgd_prepare_tx() and split out a new function iwl_mvm_protect_assoc(), and call it on successful association to extend the time event to the minimum time if necessary. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211024181719.411c174d9e5e.I03c701c2e9e6788f34546e538264763db0ab30ef@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-10-28iwlwifi: rename CHANNEL_SWITCH_NOA_NOTIF to CHANNEL_SWITCH_START_NOTIFNathan Errera4-14/+14
There is no relation between the name and the purpose of the notification. This notification is sent from FW when the channel switch starts. Signed-off-by: Nathan Errera <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211024181719.24b71b0cb741.I97deb70e18f259de51395a1e7c7e58c7b006c317@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-10-28iwlwifi: mvm: remove session protection on disassocJohannes Berg1-0/+3
If we somehow get disassociated while still waiting for a beacon during connection, we can end up printing the No beacon heard and the session protection is over already... message even if we aren't really quite waiting for it anymore. Remove the time event, if it's running, when we get disassociated and don't need to wait for beacons anymore. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211024181719.6192e2363784.Ie9c2bfdc30dcfff2c4dd7c393c79e3ac182840a9@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-10-28iwlwifi: mvm: fix WGDS table print in iwl_mvm_chub_update_mcc()Luca Coelho1-2/+3
WGDS table index 0 means disabled, but we were erroneously checking for < 0 to print that it is disabled. Fix that and make the print more readable by mentioning that it's either disabled or there was an error. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211024181719.98a5572bf0f8.I6c112ca80cf427f12b2c752899d293cb6437ba5f@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-10-28iwlwifi: rename GEO_TX_POWER_LIMIT to PER_CHAIN_LIMIT_OFFSET_CMDLuca Coelho5-26/+27
When this code was implemented, there was no official FW API description yet, so a placeholder name was used (GEO_TX_POWER_LIMIT). But then the command became actually called PER_CHAIN_LIMIT_OFFSET_CMD. Rename the command (and change related comments) to PER_CHAIN_LIMIT_OFFSET_CMD to avoid confusion. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211024181719.672fa727ef75.I6572df5d1e3441a0214993a59985da9a9431f3e5@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-10-28iwlwifi: mvm: d3: use internal data representationJohannes Berg2-188/+212
Trying to convert from one firmware data representation to the next version is getting tedious and error-prone, and doesn't lend itself well to new APIs being added. Additionally, the version 11 of the API as defined in the driver doesn't even exist in the firmware. Instead of converting to a newer firmware version of the data, convert to an internal representation. This takes a bit more space because the TKIP/AES counters etc. must be kept twice, their representation is different and we don't know which of the ones it is until later, but this is just a temporary use of memory, and the code is clearer this way. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20211024181719.9e71630627f3.Iad975e15338844ca068683f62a51eb1fcb69e608@changeid Signed-off-by: Luca Coelho <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.