aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2015-04-14bgmac: set received skb headroom to NET_SKB_PADFelix Fietkau2-7/+11
A packet buffer offset of 30 bytes is inefficient, because the first 2 bytes end up in a different cacheline. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-14bgmac: leave interrupts disabled as long as there is work to doFelix Fietkau2-22/+10
Always poll rx and tx during NAPI poll instead of relying on the status of the first interrupt. This prevents bgmac_poll from leaving unfinished work around until the next IRQ. In my tests this makes bridging/routing throughput under heavy load more stable and ensures that no new IRQs arrive as long as bgmac_poll uses up the entire budget. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-14bgmac: simplify tx ring index handlingFelix Fietkau2-29/+23
Keep incrementing ring->start and ring->end instead of pointing it to the actual ring slot entry. This simplifies the calculation of the number of free slots. Signed-off-by: Felix Fietkau <[email protected]> Acked-by: Rafał Miłecki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-14toshiba: Remove celleb from Kconfig optionsDaniel Axtens1-2/+2
The toshiba drivers had celleb as an optional dependency. celleb has been dropped [1], so clean that out of Kconfig. [1] http://patchwork.ozlabs.org/patch/451730/ CC: [email protected] CC: Valentin Rothberg <[email protected]> CC: [email protected] CC: [email protected] Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-14hv_netvsc: Implement partial copy into send bufferHaiyang Zhang3-19/+46
If remaining space in a send buffer slot is too small for the whole message, we only copy the RNDIS header and PPI data into send buffer, so we can batch one more packet each time. It reduces the vmbus per-message overhead. Signed-off-by: Haiyang Zhang <[email protected]> Reviewed-by: K. Y. Srinivasan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-14Merge tag 'trace-v4.1' of ↵Linus Torvalds10-652/+923
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Some clean ups and small fixes, but the biggest change is the addition of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints. Tracepoints have helper functions for the TP_printk() called __print_symbolic() and __print_flags() that lets a numeric number be displayed as a a human comprehensible text. What is placed in the TP_printk() is also shown in the tracepoint format file such that user space tools like perf and trace-cmd can parse the binary data and express the values too. Unfortunately, the way the TRACE_EVENT() macro works, anything placed in the TP_printk() will be shown pretty much exactly as is. The problem arises when enums are used. That's because unlike macros, enums will not be changed into their values by the C pre-processor. Thus, the enum string is exported to the format file, and this makes it useless for user space tools. The TRACE_DEFINE_ENUM() solves this by converting the enum strings in the TP_printk() format into their number, and that is what is shown to user space. For example, the tracepoint tlb_flush currently has this in its format file: __print_symbolic(REC->reason, { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, { TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, { TLB_LOCAL_SHOOTDOWN, "local shootdown" }, { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }) After adding: TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH); TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN); TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN); Its format file will contain this: __print_symbolic(REC->reason, { 0, "flush on task switch" }, { 1, "remote shootdown" }, { 2, "local shootdown" }, { 3, "local mm shootdown" })" * tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Add enum_map file to show enums that have been mapped writeback: Export enums used by tracepoint to user space v4l: Export enums used by tracepoints to user space SUNRPC: Export enums in tracepoints to user space mm: tracing: Export enums in tracepoints to user space irq/tracing: Export enums in tracepoints to user space f2fs: Export the enums in the tracepoints to userspace net/9p/tracing: Export enums in tracepoints to userspace x86/tlb/trace: Export enums in used by tlb_flush tracepoint tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM() tracing: Allow for modules to convert their enums to values tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation tracing: Give system name a pointer brcmsmac: Move each system tracepoints to their own header iwlwifi: Move each system tracepoints to their own header mac80211: Move message tracepoints to their own header tracing: Add TRACE_SYSTEM_VAR to xhci-hcd tracing: Add TRACE_SYSTEM_VAR to kvm-s390 tracing: Add TRACE_SYSTEM_VAR to intel-sst ...
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds8-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-13e1000e: Move pm_qos_req to e1000e adapterThomas Graf2-4/+5
e1000e is the only driver requiring pm_qos_req, instead of causing every device to waste up to 240 bytes. Allocate it for the specific driver. Signed-off-by: Thomas Graf <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-12Merge branch 'master' of ↵David S. Miller12-47/+462
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-04-11 This series contains updates to iflink, ixgbe and ixgbevf. The entire set of changes come from Vlad Zolotarov to ultimately add the ethtool ops to VF driver to allow querying the RSS indirection table and RSS random key. Currently we support only 82599 and x540 devices. On those devices, VFs share the RSS redirection table and hash key with a PF. Letting the VF query this information may introduce some security risks, therefore this feature will be disabled by default. The new netdev op allows a system administrator to change the default behaviour with "ip link set" command. The relevant iproute2 patch has already been sent and awaits for this series upstream. ==================== Signed-off-by: David S. Miller <[email protected]>
2015-04-12net/macb: sqe_test_errors are TX errors, not RX errorsWolfgang Steinwender1-2/+2
The statistics are grouped by TX and RX errors. The SQE Test Errors Register indicates problems with TX. Signed-off-by: Wolfgang Steinwender <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-13Merge branch 'pnp'Rafael J. Wysocki1-14/+1
* pnp: PNP: Avoid leaving unregistered device objects in lists PNP: Convert pnp_lock into a mutex PNP: tty/serial/8250/8250_fintek: Use module_pnp_driver to register driver PNP: platform/x86/apple-gmux: Use module_pnp_driver to register driver PNP: net/sb1000: Use module_pnp_driver to register driver PNP: media/rc: Use module_pnp_driver to register driver PNP: ide/ide-pnp: Use module_pnp_driver to register driver PNP: ata/pata_isapnp: Use module_pnp_driver to register driver PNP: tpm/tpm_infineon: Use module_pnp_driver to register driver PNP: Add helper macro for pnp_register_driver boilerplate PNP / ACPI: Use ACPI_COMPANION_SET() during initialization
2015-04-11make new_sync_{read,write}() staticAl Viro2-4/+0
All places outside of core VFS that checked ->read and ->write for being NULL or called the methods directly are gone now, so NULL {read,write} with non-NULL {read,write}_iter will do the right thing in all cases. Signed-off-by: Al Viro <[email protected]>
2015-04-11ixgbevf: Add the appropriate ethtool ops to query RSS indirection table and keyVlad Zolotarov1-0/+69
Added get_rxfh_indir_size, get_rxfh_key_size and get_rxfh ethtool_ops callbacks implementations. This enables the ethtool's "-x" and "--show-rxfh[-indir]" options for VF devices. This patch adds the support for 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-11ixgbevf: Add RSS Key query codeVlad Zolotarov4-0/+57
Add the ixgbevf_get_rss_key() function that queries the PF for an RSS Random Key using a new VF-PF channel IXGBE_VF_GET_RSS_KEY command. This patch adds the support for 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-11ixgbe: Add GET_RSS_KEY command to VF-PF channel commands setVlad Zolotarov2-0/+22
For 82599 and x540 VFs and PF share the same RSS Key. Therefore we will return the same RSS key for all VFs. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-11ixgbevf: Add a RETA query codeVlad Zolotarov5-1/+80
We will currently support only 82599 and x540 devices. Support for other devices will be added later. - Added a new API version support. - Added the query implementation in the ixgbevf. Signed-off-by: Vlad Zolotarov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-10ixgbe: Add a RETA query command to VF-PF channel APIVlad Zolotarov2-0/+39
Add this new command for 82599 and x540 devices only. Support for other devices will be added later. 82599 and x540 VFs and PF share the same RSS redirection table (RETA). Therefore we just return it for all VFs. For 82599 and x540 RETA table is an array of 32 registers (128 bytes) and the maximum number of registers that may be delivered in a single VF-PF channel command is 15. On the other hand VFs of these devices can be configured to have up to 4 RSS queues. Therefore we will "compress" the RETA by transferring only 2 bits per entry and thereby it will take only 8 registers (DWORDS) to transfer the whole VF RETA. Thus this patch does the following: - Adds a new API version (to specify a new commands set). - Adds the IXGBE_VF_GET_RETA command to the VF-PF commands set. Signed-off-by: Vlad Zolotarov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-10ixgbe: Add a new netdev op to allow/prevent a VF from querying an RSS infoVlad Zolotarov4-2/+40
Implements the new netdev op to allow user to enable/disable the ability of a specific VF to query its RSS Indirection Table and an RSS Hash Key. This patch limits the new feature support to 82599 and x540 devices only. Support for other devices will be added later. Signed-off-by: Vlad Zolotarov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-10ixgbe: Add the appropriate ethtool ops to query RSS indirection table and keyVlad Zolotarov3-1/+44
Added get_rxfh_indir_size, get_rxfh_key_size and get_rxfh ethtool_ops callbacks implementations. This enables the ethtool's "-x" and "--show-rxfh[-indir]" options. Signed-off-by: Vlad Zolotarov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-10ixgbe: Refactor the RSS configuration codeVlad Zolotarov2-44/+112
This patch is a preparation for enablement of ethtool RSS indirection table and hash key querying. We don't want to read registers every time the RSS info is queried. Therefore we will store its current content in the arrays in the adapter struct and will read it from there (instead of from registers) when requested. Will change the code that writes the indirection table and hash key into the HW registers to take its content from these arrays. This will also simplify the indirection table updating ethtool callback implementation in the future. Signed-off-by: Vlad Zolotarov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-10ixgbe: Drop unnecessary call to rcu_barrierAlexander Duyck1-2/+0
The ixgbe driver hasn't used call_rcu to free the rings for some time now. Since that is the case the call to rcu_barrier can be dropped since calls to kfree_rcu don't require it. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-10ixgbe: Remove NETIF_F_HW_VLAN_CTAG_FILTER from hw_featuresAlexander Duyck1-1/+1
This change makes it so that the HW_VLAN_CTAG_FILTER bit is not falsely advertised as being a feature that can be toggled on ixgbe parts. The driver was setting the bit in features and letting it be inherited by hw_features, however the driver was actually ignoring the value of the bit and just assuming it was always set. As a result VLAN filtering was always enabled which is a requirement for SR-IOV, VMDq, DCB, FCoE, and possibly other features within the adapters. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-10ixgbe: adds x550 specific FCoE offloadsVasu Dev3-27/+107
Adds x550 specific FCoE offloads for DDP context programming and increased DDP exchanges. Signed-off-by: Vasu Dev <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-10ixgbe: add support for X550 source_address_prunningDon Skidmore3-0/+77
This patch will enable X550 Source Address Prunning for VEPA bridge mode. This requires that we also have replication enabled as well, while in this mode. Signed-off-by: Don Skidmore <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-09ixgbe: add new bridge mode support function.Don Skidmore1-16/+34
This patch gathers together all the logic needed to configure bridge modes. Currently that it is rather simple but this is really laying the ground work for future X550 feature enhancement. Signed-off-by: Don Skidmore <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-09ixgbe: Move bridge mode from flag to variableDon Skidmore3-19/+20
We are currently storing our BRIDGE_MODE as a bit in our adapter flags. This patch will store the actual mode instead which minimizes obfuscation and makes following patches for X550 simpler. Signed-off-by: Don Skidmore <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-04-09Merge branch 'for-upstream' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-04-09 We've had enough new patches during the past week (especially from Marcel) that it'd be good to still get these queued for 4.1. The majority of the changes are from Marcel with lots of cleanup & refactoring patches for the HCI UART driver. Marcel also split out some Broadcom & Intel vendor specific functionality into two new btintel & btbcm modules. In addition to the HCI driver changes there's the completion of our local OOB data interface for pairing, added support for requesting remote LE features when connecting, as well as a couple of minor fixes for mac802154. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2015-04-09amd-xgbe: Add support for the netdev Tx watchdogLendacky, Thomas2-0/+12
Add support to be able to detect a hung Tx task by adding the netdev ndo_tx_timeout function callback. Do not set the watchdog_timeo value so as to use the system default time (currently 5 seconds). Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09amd-xgbe: Move Rx mode configuration into initLendacky, Thomas3-17/+20
Currently a call to configure the Rx mode (promiscuous mode, all multicast mode, etc.) is made in xgbe_start separate from the xgbe_init function. This call to set the Rx mode should be part of the xgbe_init function so that calls to the init function don't have to be preceded with calls to configure the Rx mode. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09amd-xgbe: Allow rx-frames coalescing to be changed anytimeLendacky, Thomas4-28/+21
Currently the device must be down in order to update the rx-frames coalescing setting because the interrupt indicator is set in the descriptor data during initialization. Allow this setting to be changed while the device is up by moving the interrupt decision into the descriptor reset function and base the decision off of the supplied descriptor index value. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09udptunnels: Call handle_offloads after inserting vlan tag.Jesse Gross1-10/+10
handle_offloads() calls skb_reset_inner_headers() to store the layer pointers to the encapsulated packet. However, we currently push the vlag tag (if there is one) onto the packet afterwards. This changes the MAC header for the encapsulated packet but it is not reflected in skb->inner_mac_header, which breaks GSO and drivers which attempt to use this for encapsulation offloads. Fixes: 1eaa8178 ("vxlan: Add tx-vlan offload support.") Signed-off-by: Jesse Gross <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09Merge tag 'wireless-drivers-next-for-davem-2015-04-09' of ↵David S. Miller54-344/+775
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: iwlwifi: * some more work on LAR * fixes for UMAC scan * more work on debugging framework * more work for 8000 devices * cleanups and small bugfixes ==================== Signed-off-by: David S. Miller <[email protected]>
2015-04-09usbnet: rename work handlerOliver Neukum1-2/+2
"kevent" is an extremely generic name that causes trouble if debugging for work queues is used. So change it to something clear. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09e100: Use dma_rmb/wmb where appropriateAlexander Duyck1-3/+3
Reduce the CPU overhead for transmit and receive by using lightweight dma_ barriers instead of full barriers where they are applicable. Cc: Jeff Kirsher <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09i40e/i40evf: Use dma_rmb where appropriateAlexander Duyck2-4/+4
Update i40e and i40evf to use dma_rmb. This should improve performance by decreasing the barrier overhead on strong ordered architectures. Cc: Jeff Kirsher <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09mlx4/mlx5: Use dma_wmb/rmb where appropriateAlexander Duyck4-10/+10
This patch should help to improve the performance of the mlx4 and mlx5 on a number of architectures. For example, on x86 the dma_wmb/rmb equates out to a barrer() call as the architecture is already strong ordered, and on PowerPC the call works out to a lwsync which is significantly less expensive than the sync call that was being used for wmb. I placed the new barriers between any spots that seemed to be trying to order memory/memory reads or writes, if there are any spots that involved MMIO I left the existing wmb in place as the new barriers cannot order transactions between coherent and non-coherent memories. v2: Reduced the replacments to just the spots where I could clearly identify the usage pattern. Cc: Amir Vadai <[email protected]> Cc: Ido Shamay <[email protected]> Cc: Eli Cohen <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09cxgb3/4/4vf: Update drivers to use dma_rmb/wmb where appropriateAlexander Duyck3-14/+14
Update the Chelsio Ethernet drivers to use the dma_rmb/wmb calls instead of the full barriers in order to improve performance. Cc: Santosh Raspatur <[email protected]> Cc: Hariprasad S <[email protected]> Cc: Casey Leedom <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09stmmac: devm_reset_control_get can return PROBE_DEFERPhil Reid1-1/+1
In socfpga_dwmac_parse_data forward error code from devm_reset_control_get. This gives the driver another chance to laod if altr,rst-mgr is loaded after the network driver. Signed-off-by: Phil Reid <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09mac802154: fix transmission power datatypeVarka Bhadram1-1/+1
Netlink attribute for the power is s8. But for the driver level operations we are collection power level value into integer. It has to be change to s8 from int. Signed-off-by: Varka Bhadram <[email protected]> Acked-by: Alexander Aring <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2015-04-08vxlan: do not exit on error in vxlan_stop()WANG Cong1-4/+1
We need to clean up vxlan despite vxlan_igmp_leave() fails. This fixes the following kernel warning: WARNING: CPU: 0 PID: 6 at lib/debugobjects.c:263 debug_print_object+0x7c/0x8d() ODEBUG: free active (active state 0) object type: timer_list hint: vxlan_cleanup+0x0/0xd0 CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.0.0-rc7+ #953 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net 0000000000000009 ffff88011955f948 ffffffff81a25f5a 00000000253f253e ffff88011955f998 ffff88011955f988 ffffffff8107608e 0000000000000000 ffffffff814deba2 ffff8800d4e94000 ffffffff82254c30 ffffffff81fbe455 Call Trace: [<ffffffff81a25f5a>] dump_stack+0x4c/0x65 [<ffffffff8107608e>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814deba2>] ? debug_print_object+0x7c/0x8d [<ffffffff81076116>] warn_slowpath_fmt+0x46/0x48 [<ffffffff814deba2>] debug_print_object+0x7c/0x8d [<ffffffff81666bf1>] ? vxlan_fdb_destroy+0x5b/0x5b [<ffffffff814dee02>] __debug_check_no_obj_freed+0xc3/0x15f [<ffffffff814df728>] debug_check_no_obj_freed+0x12/0x16 [<ffffffff8117ae4e>] slab_free_hook+0x64/0x6c [<ffffffff8114deaa>] ? kvfree+0x31/0x33 [<ffffffff8117dc66>] kfree+0x101/0x1ac [<ffffffff8114deaa>] kvfree+0x31/0x33 [<ffffffff817d4137>] netdev_freemem+0x18/0x1a [<ffffffff817e8b52>] netdev_release+0x2e/0x32 [<ffffffff815b4163>] device_release+0x5a/0x92 [<ffffffff814bd4dd>] kobject_cleanup+0x49/0x5e [<ffffffff814bd3ff>] kobject_put+0x45/0x49 [<ffffffff817d3fc1>] netdev_run_todo+0x26f/0x283 [<ffffffff817d4873>] ? rollback_registered_many+0x20f/0x23b [<ffffffff817e0c80>] rtnl_unlock+0xe/0x10 [<ffffffff817d4af0>] default_device_exit_batch+0x12a/0x139 [<ffffffff810aadfa>] ? wait_woken+0x8f/0x8f [<ffffffff817c8e14>] ops_exit_list+0x2b/0x57 [<ffffffff817c9b21>] cleanup_net+0x154/0x1e7 [<ffffffff8108b05d>] process_one_work+0x255/0x4ad [<ffffffff8108af69>] ? process_one_work+0x161/0x4ad [<ffffffff8108b4b1>] worker_thread+0x1cd/0x2ab [<ffffffff8108b2e4>] ? process_scheduled_works+0x2f/0x2f [<ffffffff81090686>] kthread+0xd4/0xdc [<ffffffff8109eca3>] ? local_clock+0x19/0x22 [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83 [<ffffffff81a31c48>] ret_from_fork+0x58/0x90 [<ffffffff810905b2>] ? __kthread_parkme+0x83/0x83 For the long-term, we should handle NETDEV_{UP,DOWN} event from the lower device of a tunnel device. Fixes: 56ef9c909b40 ("vxlan: Move socket initialization to within rtnl scope") Cc: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08be2net: Fix a bug in Rx buffer postingAjit Khaparde2-1/+2
The numPosted field in the ERX Doorbell register is 8-bits wide. So the max buffers that we can post at a time is 255 and not 256 which we are doing currently. Signed-off-by: Ajit Khaparde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08sfc: Revert SRIOV changes.David S. Miller16-454/+207
This reverts commits: d92916f71a57582ce7276547510cedb2c10b6bd6 ("sfc: Own header for nic-specific sriov functions,") 25672dba9535b804331145379c79f835ba2205c5 ("sfc: Enable VF's via a write to the sysfs file sriov_numvfs") As they break the build with SRIOV disabled and there is no easy way to fix it the way things are arranged. Reported-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08net: phy: broadcom: Add BCM54616S phy entryAlessio Igor Bogani2-2/+16
Signed-off-by: Alessio Igor Bogani <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08stmmac: Add an optional register interface clockAndrew Bresticker2-0/+16
The DWMAC block on certain SoCs (such as IMG Pistachio) have a second clock which must be enabled in order to access the peripheral's register interface, so add support for requesting and enabling an optional "pclk". Signed-off-by: Andrew Bresticker <[email protected]> Cc: James Hartley <[email protected]> Cc: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08vxlan: fix a shadow local variableWANG Cong1-1/+0
Commit 79b16aadea32cce077 ("udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb()") introduce 'sk' but we already have one inner 'sk'. Cc: David S. Miller <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08hv_netvsc: try linearizing big SKBs before dropping themVitaly Kuznetsov1-5/+20
In netvsc_start_xmit() we can handle packets which are scattered around not more than MAX_PAGE_BUFFER_COUNT-2 pages. It is, however, easy to create a packet which is not big in size but occupies more pages (e.g. if it uses frags on compound pages boundaries). When we drop such packet it cases sender to try resending it but in most cases it will try resending the same packet which will also get dropped, this will cause the particular connection to stick. To solve the issue we can try linearizing skb. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08hv_netvsc: use single existing drop path in netvsc_start_xmitVitaly Kuznetsov1-8/+6
... which validly uses dev_kfree_skb_any() instead of dev_kfree_skb(). Setting ret to -EFAULT and -ENOMEM have no real meaning here (we need to set it to anything but -EAGAIN) as we drop the packet and return NETDEV_TX_OK anyway. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08sfc: Enable VF's via a write to the sysfs file sriov_numvfsShradha Shah9-1/+87
This patch adds support for the use of sriov_configure on EF10 to enable Virtual Functions while the driver is loaded. Signed-off-by: Shradha Shah <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08sfc: Own header for nic-specific sriov functions, single instance of ↵Shradha Shah15-207/+368
netdev_ops and sriov removed from Falcon code By putting all the efx_{siena,ef10}_sriov_* declarations in {siena,ef10}_sriov.h, ensure they cannot be called from nic-generic code. Also fixes up an instance of this, where mcdi.c was calling efx_siena_sriov_flr. The single instance of netdev_ops should call general high level functions that can then call something adapter specific in efx_nic_type. We should only do adapter specialisation via efx_nic_type. Removal of sriov functionality from the Falcon code means that tests are needed for the presence of some callbacks. Signed-off-by: Shradha Shah <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-08e1000, e1000e: Use dma_rmb instead of rmb for descriptor read orderingAlexander Duyck2-7/+7
This change replaces calls to rmb with dma_rmb in the case where we want to order all follow-on descriptor reads after the check for the descriptor status bit. Signed-off-by: Alexander Duyck <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.