aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2016-11-13net: ethernet: ixp4xx_eth: fix spelling mistake in debug messageColin Ian King1-2/+1
Trivial fix to spelling mistake "successed" to "succeeded" in debug message. Also unwrap multi-line literal string. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13ibmvnic: Fix size of debugfs name bufferThomas Falcon1-1/+1
This mistake was causing debugfs directory creation failures when multiple ibmvnic devices were probed. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13ibmvnic: Unmap ibmvnic_statistics structureThomas Falcon1-0/+3
This structure was mapped but never subsequently unmapped. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13sfc: clear napi_hash state when copying channelsBert Kenward1-0/+3
efx_copy_channel() doesn't correctly clear the napi_hash related state. This means that when napi_hash_add is called for that channel nothing is done, and we are left with a copy of the napi_hash_node from the old channel. When we later call napi_hash_del() on this channel we have a stale napi_hash_node. Corruption is only seen when there are multiple entries in one of the napi_hash lists. This is made more likely by having a very large number of channels. Testing was carried out with 512 channels - 32 channels on each of 16 ports. This failure typically appears as protection faults within napi_by_id() or napi_hash_add(). efx_copy_channel() is only used when tx or rx ring sizes are changed (ethtool -G). Fixes: 36763266bbe8 ("sfc: Add support for busy polling") Signed-off-by: Bert Kenward <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13net: ethernet: ti: davinci_cpdma: don't stop ctlr if it was stoppedIvan Khoronzhuk1-1/+1
No need to stop ctlr if it was already stopped. It can cause timeout warns. Steps: - ifconfig eth0 down - ethtool -l eth0 rx 8 tx 8 - ethtool -l eth0 rx 1 tx 1 Signed-off-by: Ivan Khoronzhuk <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13net: ethernet: ti: davinci_cpdma: fix fixed prio cpdma ctlr configurationIvan Khoronzhuk2-53/+53
The dma ctlr is reseted to 0 while cpdma soft reset, thus cpdma ctlr cannot be configured after cpdma is stopped. So restoring content of cpdma ctlr while off/on procedure is needed. The cpdma ctlr off/on procedure is present while interface down/up and while changing number of channels with ethtool. In order to not restore content in many places, move it to cpdma_ctlr_start(). Signed-off-by: Ivan Khoronzhuk <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13mlxsw: reg: Fix pwm_frequency field size in MFCR registerJiri Pirko1-1/+1
The field is 7bit long. Fix it. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13mlxsw: spectrum_router: Correctly dump neighbour activityArkadi Sharshevsky1-1/+21
The device's neighbour table is periodically dumped in order to update the kernel about active neighbours. A single dump session may span multiple queries, until the response carries less records than requested or when a record (can contain up to four neighbour entries) is not full. Current code stops the session when the number of returned records is zero, which can result in infinite loop in case of high packet rate. Fix this by stopping the session according to the above logic. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13mlxsw: spectrum: Fix refcount bug on span entriesYotam Gigi1-1/+3
When binding port to a newly created span entry, its refcount is initialized to zero even though it has a bound port. That leads to unexpected behaviour when the user tries to delete that port from the span entry. Fix this by initializing the reference count to 1. Also add a warning to put function. Fixes: 763b4b70afcd ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Signed-off-by: Yotam Gigi <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13bnxt_en: Fix VF virtual link state.Michael Chan1-2/+2
If the physical link is down and the VF virtual link is set to "enable", the current code does not always work. If the link is down but the cable is attached, the firmware returns LINK_SIGNAL instead of NO_LINK. The current code is treating LINK_SIGNAL as link up. The fix is to treat link as down when the link_status != LINK. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13bnxt_en: Fix ring arithmetic in bnxt_setup_tc().Michael Chan1-5/+6
The logic is missing the check on whether the tx and rx rings are sharing completion rings or not. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13net: phy: marvell: optimize logic for page changing during initUwe Kleine-König1-4/+2
Instead of remembering if the page was changed, just compare the current page to the saved one. This is easier and has the advantage to save a register write if the page was already restored. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13r8152: Fix error path in open functionGuenter Roeck1-7/+10
If usb_submit_urb() called from the open function fails, the following crash may be observed. r8152 8-1:1.0 eth0: intr_urb submit failed: -19 ... r8152 8-1:1.0 eth0: v1.08.3 Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b pgd = ffffffc0e7305000 [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... PC is at notifier_chain_register+0x2c/0x58 LR is at blocking_notifier_chain_register+0x54/0x70 ... Call trace: [<ffffffc0002407f8>] notifier_chain_register+0x2c/0x58 [<ffffffc000240bdc>] blocking_notifier_chain_register+0x54/0x70 [<ffffffc00026991c>] register_pm_notifier+0x24/0x2c [<ffffffbffc183200>] rtl8152_open+0x3dc/0x3f8 [r8152] [<ffffffc000808000>] __dev_open+0xac/0x104 [<ffffffc0008082f8>] __dev_change_flags+0xb0/0x148 [<ffffffc0008083c4>] dev_change_flags+0x34/0x70 [<ffffffc000818344>] do_setlink+0x2c8/0x888 [<ffffffc0008199d4>] rtnl_newlink+0x328/0x644 [<ffffffc000819e98>] rtnetlink_rcv_msg+0x1a8/0x1d4 [<ffffffc0008373c8>] netlink_rcv_skb+0x68/0xd0 [<ffffffc000817990>] rtnetlink_rcv+0x2c/0x3c [<ffffffc000836d1c>] netlink_unicast+0x16c/0x234 [<ffffffc00083720c>] netlink_sendmsg+0x340/0x364 [<ffffffc0007e85d0>] sock_sendmsg+0x48/0x60 [<ffffffc0007e9c30>] SyS_sendto+0xe0/0x120 [<ffffffc0007e9cb0>] SyS_send+0x40/0x4c [<ffffffc000203e34>] el0_svc_naked+0x24/0x28 Clean up error handling to avoid registering the notifier if the open function is going to fail. Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Add support for a KR redriverLendacky, Thomas5-37/+458
This patch provides support for the presence of a KR redriver chip in between the device PCS and an external PHY. When a redriver chip is present the device must perform clause 73 auto-negotiation in order to set the redriver chip for the downstream connection. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Add support for MDIO attached PHYsLendacky, Thomas6-11/+557
Use the phylib support in the kernel to communicate with and control an MDIO attached PHY. Use the hardware's MDIO communication mechanism to communicate with the PHY. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Add support for SFP+ modulesLendacky, Thomas6-8/+1642
Add support for recognizing and using SFP+ modules directly. This includes using the I2C support to read and interpret the information returned from an SFP+ module and configuring things properly. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13net: phy: expose phy_aneg_done API for use by driversLendacky, Thomas2-10/+2
Make phy_aneg_done() available to drivers so that the result of the auto-negotiation initiated by phy_start_aneg() can be determined. Remove the local implementation of phy_aneg_done() from the Aeroflex driver and use the phy library version. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Add I2C support for sideband communicationLendacky, Thomas9-1/+753
Add support to initialize and use the I2C controller within the hardware in order to perform sideband communication, e.g. determine the SFP media type that is installed. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Add ECC status support for the device memoryLendacky, Thomas7-3/+340
Some versions of the amd-xgbe device are capable of reporting ECC error information back to the driver. Add support to process, track and report on this information. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Add support for new DMA interrupt modeLendacky, Thomas6-36/+91
The current per channel DMA interrupt support is based on an edge triggered interrupt that is not maskable. This results in having to call the disable_irq/enable_irq functions in order to prevent interrupts during napi processing. The hardware now has a way to configure the per channel DMA interrupt that will allow for masking the interrupt which prevents calling disable_irq/enable_irq now. This patch makes use of this support. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Allow for a greater number of Rx queuesLendacky, Thomas1-2/+1
Remove the call to netif_get_num_default_rss_queues() and replace it with num_online_cpus() to allow for the possibility of using all of the hardware DMA channels available. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Add PCI device supportLendacky, Thomas11-20/+1657
Add support for new PCI devices to the driver. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Add a workaround for Tx timestamp issueLendacky, Thomas3-3/+12
Update the reading of the Tx timestamp to account for a hardware issue on how the fields and interrupt are cleared. The "seconds" portion of the timestamp should be read first, followed by the "nanoseconds" portion. Reading the "nanoseconds" portion should clear the timestamp data and the interrupt. Because of an issue with the hardware this order is reversed and reading the "seconds" portion actually clears the timestamp. The code currently follows this workaround, but to guard against future versions where this is fixed add a field to the version data to indicate if the workaround is required or not. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-13amd-xgbe: Guard against incorrectly generated interruptsLendacky, Thomas1-1/+15
Due to a hardware issue, it is possible for interrupt events to be incorrectly generated when performing a soft reset. To guard against this, perform the soft reset twice. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-12bpf, mlx4: fix prog refcount in mlx4_en_try_alloc_resources error pathDaniel Borkmann1-1/+4
Commit 67f8b1dcb9ee ("net/mlx4_en: Refactor the XDP forwarding rings scheme") added a bug in that the prog's reference count is not dropped in the error path when mlx4_en_try_alloc_resources() is failing from mlx4_xdp_set(). We previously took bpf_prog_add(prog, priv->rx_ring_num - 1), that we need to release again. Earlier in the call path, dev_change_xdp_fd() itself holds a reference to the prog as well (hence the '- 1' in the bpf_prog_add()), so a simple atomic_sub() is safe to use here. When an error is propagated, then bpf_prog_put() is called eventually from dev_change_xdp_fd() Fixes: 67f8b1dcb9ee ("net/mlx4_en: Refactor the XDP forwarding rings scheme") Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-12net: ethernet: ti: davinci_cpdma: free memory while channel destroyIvan Khoronzhuk1-1/+1
While create/destroy channel operation memory is not freed. It was supposed that memory is freed while driver remove. But a channel can be created and destroyed many times while changing number of channels with ethtool. Based on net-next/master Signed-off-by: Ivan Khoronzhuk <[email protected]> Reviewed-by: Grygorii Strashko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10mlxsw: spectrum_router: Ignore FIB notification events for non-init namespacesJiri Pirko1-0/+3
Since now, the table with same id in multiple netnamespaces were squashed to a single virtual router. That is not only incorrect, it also causes error messages when trying to use RALUE register to do double remove of FIB entries, like this one: mlxsw_spectrum 0000:03:00.0: EMAD reg access failed (tid=facb831c00007b20,reg_id=8013(ralue),type=write,status=7(bad parameter)) Since we don't allow ports to change namespaces (NETIF_F_NETNS_LOCAL), and the infrastructure is not yet prepared to handle netnamespaces, just ignore FIB notification events for non-init namespaces. That is clear to do since we don't need to offload them. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Jiri Pirko <[email protected]> Acked-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10mlxsw: spectrum_router: Fix handling of neighbour structureJiri Pirko1-61/+34
__neigh_create function works in a different way than assumed. It passes "n" as a parameter to ndo_neigh_construct. But this "n" might be destroyed right away before __neigh_create() returns in case there is already another neighbour struct in the hashtable with the same dev and primary key. That is not expected by mlxsw_sp_router_neigh_construct() and the stored "n" points to freed memory, eventually leading to crash. Fix this by doing tight 1:1 coupling between neighbour struct and internal driver neigh_entry. That allows to narrow down the key in internal driver hashtable to do lookups by "n" only. Fixes: 6cf3c971dc84 ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Jiri Pirko <[email protected]> Acked-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10qed: Correct rdma params configurationRam Amrani1-9/+8
Previous fix has broken RoCE support as the rdma_pf_params are now being set into the parameters only after the params are alrady assigned into the hw-function. Fixes: 0189efb8f4f8 ("qed*: Fix Kconfig dependencies with INFINIBAND_QEDR") Signed-off-by: Ram Amrani <[email protected]> Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10qed: configure ll2 RoCE v1/v2 flavor correctlyRam Amrani2-3/+1
Currently RoCE v2 won't operate with RDMA CM due to missing setting of the roce-flavour in the ll2 configuration. This patch properly sets the flavour, and deletes incorrect HSI that doesn't [yet] exist. Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: Ram Amrani <[email protected]> Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: add the support to add/remove the ucast entry to/from tableKejian Yan7-0/+155
This patch adds the support to add or remove the unicast entries to the table and remove from the table. Reported-by: Daode Huang <[email protected]> Signed-off-by: Kejian Yan <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: add multicast tcam table clearKejian Yan7-0/+113
There is no clear operation before add a new multicast tcam table, so the tcam table will be overflow when add more entries. Reported-by: Daode Huang <[email protected]> Signed-off-by: Kejian Yan <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: modify tcam table of mask_keyQianqian Xie1-0/+7
The packets of wrong mac address(only the last bit is different) can be received in Big-endian by current definition of mask_key. Thus it needs to be modified to support Big-endian and ensure Big-endian normal. Signed-off-by: Qianqian Xie <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: modify tcam table of mac mc-entryQianqian Xie1-8/+17
The current definition of mac_mc_entry is only suitable for Little-endian. Thus it needs to modify tcam table of mac mc-entry to support both Little-endian and Big-endian. Signed-off-by: Qianqian Xie <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: modify tcam table of mac mc-portQianqian Xie1-5/+13
Little-endian is only supported by current tcam table to add or delete mac mc-port. This patch makes it support both Little-endian and Big-endian. Signed-off-by: Qianqian Xie <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: modify table index to get mac entryQianqian Xie1-4/+10
Big-endian is not supported by the current definition of table index to get mac entry. It needs to be modified to support both Little-endian and Big-endian. Signed-off-by: Qianqian Xie <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: modify tcam table of mac uc-entryQianqian Xie1-6/+12
The current definition of mac_uc_entry is only suitable for Little-endian. Thus it needs to modify tcam table of mac uc-entry to support both Little-endian and Big-endian. Signed-off-by: Qianqian Xie <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: modify tcam table and set mac keyQianqian Xie2-9/+20
The current definition of dsaf_drv_tbl_tcam_key is only suitable for Little-endian. If data is stored in Big-endian, this may lead to error in data use. Shift operation can make it work normally in both Big-endian and Little-endian. Signed-off-by: Qianqian Xie <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: modify buffer format of cpu data to le64Qianqian Xie1-3/+3
Hardware ring buffer data is stored in Little-endian. Thus cpu data should be modified to Little-endian. Signed-off-by: Qianqian Xie <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: fix to intimate the link-status change by adding LF/RF methodDaode Huang5-49/+37
In current scenario, when the interface is disabled we reset the XGMAC RX/TX functionality. This operation does not affects the PHY layer/SFP and which appears UP to the remote end(this behaviour is unlike GMAC). The result is remote end keeps on sending the packets which gets partly processed by XMAC and dropped. Since these are partly processed these appears as errored packets in the packet counter statistics. This patch fixes this behaviour and adds local-fault and remote-fault functionality which can be used to intimate the remote peer whenever the state of the interface changes. This patch also removes the existing hns_dsaf_xge_core_srst_by_port function which was being used to reset the RX/TX functionality at XGE Core. Reported-by: Jun He <[email protected]> Signed-off-by: Daode Huang <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: modify ethtool statistics value errorQianqian Xie1-2/+2
This patch modify the gmac_rx_filt_pkt and gmac_rx_octets_total_filt statistics value. The two statistics is inconsistent with register, and just the opposite. Signed-off-by: Qianqian Xie <[email protected]> Signed-off-by: Jun He <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: delete redundant macro definitionQianqian Xie3-5/+1
This patch deletes redundant macro definitions in hns drivers. And change the .h file containing relation to make the layers more clearly Signed-off-by: Qianqian Xie <[email protected]> Signed-off-by: Weiwei Deng <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: bug fix about restart auto-negotiationDaode Huang1-1/+2
When set auto-negotiation off and duplex half, if run "ethtool -r ethX" on port with phy, then the port will be failed to work. It should forbid to start auto-negotiation when auto-negotiate is off. This patch add the limited condition. Reported-by: Jinchuang Tian <[email protected]> Signed-off-by: Daode Huang <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Reviewed-by: lipeng <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: set default mac pause time to 0xffffDaode Huang1-1/+1
The default mac pause time set to 0xff which is too short for pausing, this patch change it to the max value 0xffff. Signed-off-by: Daode Huang <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Reviewed-by: lipeng <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: fix for promisc mode in HNS driverKejian Yan4-4/+67
If set promisc mode when there is some traffic, The service nic will cause system halted. We reserve the last 6 tcam entry for the 6 ports. If promisc mode is enabled, we can config the relative tcam as fuzzy matching and set to be valid, or set the tcam to be invalid Signed-off-by: Kejian Yan <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10net: hns: add fuzzy match of tcam table for hnsKejian Yan5-54/+118
Since there is not enough tcam table entries for vlan and multicast address, HNSv2 needs to add support of fuzzy matching of TCAM tables. To add fuzzy match of TCAM, we Add the property to mask the bits to be fuzzy matched Signed-off-by: Kejian Yan <[email protected]> Reviewed-by: Yisen Zhuang <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-10xen-netback: fix error handling outputArnd Bergmann1-1/+1
The connect function prints an unintialized error code after an earlier initialization was removed: drivers/net/xen-netback/xenbus.c: In function 'connect': drivers/net/xen-netback/xenbus.c:938:3: error: 'err' may be used uninitialized in this function [-Werror=maybe-uninitialized] This prints it as -EINVAL instead, which seems to be the most appropriate error code. Before the patch that caused the warning, this would print a positive number returned by vsscanf() instead, which is also wrong. We probably don't need a backport though, as fixing the warning here should be sufficient. Fixes: f95842e7a9f2 ("xen: make use of xenbus_read_unsigned() in xen-netback") Fixes: 8d3d53b3e433 ("xen-netback: Add support for multiple queues") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2016-11-09Net Driver: Add Cypress GX3 VID=04b4 PID=3610.Allan Chou1-0/+17
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller (Vendor=04b4 ProdID=3610). Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems with the Kensington SD4600P USB-C Universal Dock with Power, which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. A similar patch was signed-off and tested-by Allan Chou <[email protected]> on 2015-12-01. Allan verified his similar patch on x86 Linux kernel 4.1.6 system with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. Tested-by: Allan Chou <[email protected]> Tested-by: Chris Roth <[email protected]> Tested-by: Artjom Simon <[email protected]> Signed-off-by: Allan Chou <[email protected]> Signed-off-by: Chris Roth <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-09ptp: dp83640: Use the high resolution frequency method.Richard Cochran1-7/+7
The dp83640 has a frequency resolution of about 0.029 ppb. This patch lets users of the device benefit from the increased frequency resolution when tuning the clock. Signed-off-by: Richard Cochran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-11-09ptp: igb: Use the high resolution frequency method.Richard Cochran1-8/+8
The 82580 and related devices offer a frequency resolution of about 0.029 ppb. This patch lets users of the device benefit from the increased frequency resolution when tuning the clock. Signed-off-by: Richard Cochran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.