aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-11-22sfc: do ARFS expiry work occasionally even without NAPI pollEdward Cree3-8/+12
If there's no traffic on a channel, its ARFS expiry work will never get scheduled by efx_poll() as that isn't being run. So make efx_filter_rfs_expire() reschedule itself to run after 30 seconds. Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22sfc: add statistics for ARFSEdward Cree3-0/+12
Report the number of successful and failed insertions, and also the current count of filters, to aid in tuning e.g. rps_flow_cnt. Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22sfc: suppress MCDI errors from ARFSEdward Cree2-6/+30
In high connection count usage, the NIC's filter table may be filled with sufficiently many ARFS filters that further insertions fail. As this does not represent a correctness issue, do not log the resulting MCDI errors. Add a debug-level message under the (by default disabled) rx_status category instead; and take the opportunity to do a little extra expiry work. Since there are now multiple workitems able to call __efx_filter_rfs_expire on a given channel, it is possible for them to race and thus pass quotas which, combined, exceed rfs_filter_count. Thus, don't WARN_ON if we loop all the way around the table with quota left over. Signed-off-by: Edward Cree <[email protected]> Tested-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22sfc: change ARFS expiry mechanismEdward Cree4-32/+45
The old rfs_filters_added method for determining the quota could potentially allow the NIC to become filled with old filters, which never get tested for expiry. Instead, explicitly make expiry check work depend on the number of filters installed, and don't count checking slots without filters in as doing work. This guarantees that each filter will be checked for expiry at least once every thirty seconds (assuming the channel to which it belongs is NAPI polling actively) regardless of fill level. Signed-off-by: Edward Cree <[email protected]> Tested-by: David Ahern <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22Merge branch '100GbE' of ↵Jakub Kicinski17-539/+1022
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== This series contains updates to the ice driver only. Bruce updates the driver to store the number of functions the device has so that it won't have to compute it when setting safe mode capabilities. Adds a check to adjust the reporting of capabilities for devices with more than 4 ports, which differ for devices with less than 4 ports. Brett adds a helper function to determine if the VF is allowed to do VLAN operations based on the host's VF configuration. Also adds a new function that initializes VLAN stripping (enabled/disabled) for the VF based on the device supported capabilities. Adds a check if the vector index is valid with the respect to the number of transmit and receive queues configured when we set coalesce settings for DCB. Adds a check if the promisc_mask contains ICE_PROMISC_VLAN_RX or ICE_PROMISC_VLAN_TX so that VLAN 0 promiscuous rules to be removed. Add a helper macro for a commonly used de-reference of a pointer to &pf->dev->pdev. Jesse fixes an issue where if an invalid virtchnl request from the VF, the driver would return uninitialized data to the VF from the PF stack, so ensure the stack variable is initialized earlier. Add helpers to the virtchnl interface make the reporting of strings consistent and help reduce stack space. Implements VF statistics gathering via the kernel ndo_get_vf_stats(). Akeem ensures we disable the state flag for each VF when its resources are returned to the device. Tony does additional cleanup in the driver to ensure the when we allocate and free memory within the same function, we should not be using devm_* variants; use regular alloc and free functions. Henry implements code to query and set the number of channels on the primary VSI for a PF via ethtool. Jake cleans up needless NULL checks in ice_sched_cleanup_all(). Kevin updates the firmware API version to align with current NVM images. v2: Added "Fixes:" tag to patch 5 commit description and added the use of netif_is_rxfh_configured() in patch 13 to see if RSS has been configured by the user, if so do not overwrite that configuration. ==================== Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22cxgb4: add stats for MQPRIO QoS offload Tx pathRahul Lakkireddy4-1/+28
Export necessary stats for traffic flowing through MQPRIO QoS offload Tx path. v2: - No change. Signed-off-by: Rahul Lakkireddy <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22cxgb4: add UDP segmentation offload supportRahul Lakkireddy6-50/+139
Implement and export UDP segmentation offload (USO) support for both NIC and MQPRIO QoS offload Tx path. Update appropriate logic in Tx to parse GSO info in skb and configure FW_ETH_TX_EO_WR request needed to perform USO. v2: - Remove inline keyword from write_eo_udp_wr() in sge.c. Let the compiler decide. Signed-off-by: Rahul Lakkireddy <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22cxgb4/chcr: update SGL DMA unmap for USORahul Lakkireddy3-101/+39
The FW_ETH_TX_EO_WR used for sending UDP Segmentation Offload (USO) requests expects the headers to be part of the descriptor and the payload to be part of the SGL containing the DMA mapped addresses. Hence, the DMA address in the first entry of the SGL can start after the packet headers. Currently, unmap_sgl() tries to unmap from this wrong offset, instead of the originally mapped DMA address. So, use existing unmap_skb() instead, which takes originally saved DMA addresses as input. Update all necessary Tx paths to save the original DMA addresses, so that unmap_skb() can unmap them properly. v2: - No change. Signed-off-by: Rahul Lakkireddy <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski29-124/+186
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-22ice: Update FW API minor versionKevin Scott1-1/+1
Update FW API minor version to align to current value advertised by FW in new NVM images. Signed-off-by: Kevin Scott <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: remove pointless NULL check of port_infoJacob Keller1-2/+1
The code in ice_sched_cleanup_all checks whether the port info is NULL prior to calling ice_sched_clear_port. However, ice_sched_clear_port already checks whether port info is non-NULL. More importantly, it also checks whether the port structure has been initialized by checking its port_state field as well. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Implement ethtool ops for channelsHenry Tieman7-19/+335
Add code to query and set the number of channels on the primary VSI for a PF. This is accessed from the 'ethtool -l' and 'ethtool -L' commands, respectively. Though the ice driver supports asymmetric queues report an IRQ vector that has both Rx and Tx queues attached and is counted as a 'combined' channel. Signed-off-by: Henry Tieman <[email protected]> Co-developed-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22net/mlx5e: Remove redundant pointer checkEli Cohen1-12/+10
When code reaches the "out" label, n is guaranteed to be valid so we can unconditionally call neigh_release. Also change the label to release_neigh to better reflect the fact that we unconditionally free the neighbour and also match other labels convention. Signed-off-by: Eli Cohen <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-11-22net/mlx5e: TC, Stub out ipv6 tun create header functionSaeed Mahameed2-4/+7
Improve mlx5e_route_lookup_ipv6 function structure by avoiding #ifdef then return -EOPNOTSUPP in the middle of the function code. To do so, we stub out mlx5e_tc_tun_create_header_ipv6 which is the only caller of this helper function to avoid calling it altogether when ipv6 is compiled out, which should also cleanup some compiler warnings of unused variables. Signed-off-by: Saeed Mahameed <[email protected]> Reviewed-by: Eli Cohen <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-11-22net/mlx5: DR, Add support for Geneve packets SW steeringYevgeny Kliteynik3-0/+83
Add support for SW steering matching on Geneve header fields: - VNI - OAM - protocol type - options length Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-11-22net/mlx5: DR, Add HW bits and definitions for Geneve flex parserYevgeny Kliteynik1-0/+13
Add definition for flex parser tunneling header for Geneve. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-11-22net/mlx5: DR, Refactor VXLAN GPE flex parser tunnel code for SW steeringYevgeny Kliteynik4-57/+66
Refactor flex parser tunnel code: - Add definition for flex parser tunneling header for VXLAN-GPE - Use macros for VXLAN-GPE SW steering when building STE - Refactor the code to reflect that this is a VXLAN GPE only code and not a general flex parser code. This also significantly simplifies addition of more flex parser protocols, such as Geneve. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-11-22net/mlx5: Don't write read-only fields in MODIFY_HCA_VPORT_CONTEXT commandLeon Romanovsky1-20/+7
The MODIFY_HCA_VPORT_CONTEXT uses field_selector to mask fields needed to be written, other fields are required to be zero according to the HW specification. The supported fields are controlled by bitfield and limited to vport state, node and port GUIDs. Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-11-22ice: implement VF stats NDOJesse Brandeburg3-0/+57
Implement the VF stats gathering via the kernel via ndo_get_vf_stats(). The driver will show per-VF stats in the output of the ip -s link show dev <PF> command. Signed-off-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: add helpers for virtchnlJesse Brandeburg1-71/+63
The virtchannel interface was repeating a lot of strings and wasting storage space in the kernel. There was also inconsistent messages for the same thing. Consolidate all those messages and bit checks into a couple of helper functions. Also, reduce stack space usage by simplifying getting the pointer to the pf using a helper. Signed-off-by: Jesse Brandeburg <[email protected]> Co-developed-by: Brett Creeley <[email protected]> Signed-off-by: Brett Creeley <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Add ice_pf_to_dev(pf) macroBrett Creeley10-341/+389
We use &pf->dev->pdev all over the code. Add a simple macro to do this for us. When multiple de-references like this are being done add a local struct device variable. Signed-off-by: Brett Creeley <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Do not use devm* functions for local usesTony Nguyen5-88/+80
In situations where we alloc and free memory within the same function do not use the devm_* variants; use regular alloc and free functions. Remove any unused vars if there are no usages after these changes. Also, replace an allocate and copy with kmemdup() and remove an unnecessary memset() to 0 after a kzalloc(). Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Refactor removal of VLAN promiscuous rulesBrett Creeley1-4/+9
Currently ice_clear_vsi_promisc() detects if the VLAN ID sent is not 0 and sets the recipe_id to ICE_SW_LKUP_PROMISC_VLAN in that case and ICE_SW_LKUP_PROMISC if the VLAN_ID is 0. However this doesn't allow VLAN 0 promiscuous rules to be removed, but they can be added. Fix this by checking if the promisc_mask contains ICE_PROMISC_VLAN_RX or ICE_PROMISC_VLAN_TX. This change was made to match what is being done for ice_set_vsi_promisc(). Signed-off-by: Brett Creeley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Fix setting coalesce to handle DCB configurationBrett Creeley1-3/+10
Currently there can be a case where a DCB map is applied and there are more interrupt vectors (vsi->num_q_vectors) than Rx queues (vsi->num_rxq) and Tx queues (vsi->num_txq). If we try to set coalesce settings in this case it will report a false failure. Fix this by checking if vector index is valid with respect to the number of Tx and Rx queues configured. Signed-off-by: Brett Creeley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Only disable VF state when freeing each VF resourcesAkeem G Abodunrin1-4/+8
It is wrong to set PF disable state flag for all VFs when freeing VF resources - Instead, we should set VF disable state flag for each VF with its resources being returned to the device. Right now, all VF opcodes, mailbox communication to clear its resources as well fails - since we already indicate that PF is in disable state, with all VFs not active. In addition, we don't need to notify VF that PF is intending to reset it, if it is already in disabled state. Signed-off-by: Akeem G Abodunrin <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: fix stack leakageJesse Brandeburg1-2/+1
In the case of an invalid virtchannel request the driver would return uninitialized data to the VF from the PF stack which is a bug. Fix by initializing the stack variable earlier in the function before any return paths can be taken. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Don't modify stripping for add/del VLANs on VFBrett Creeley1-8/+31
Currently when adding/deleting vlans in ice_vc_process_vlan_msg() we are calling ice_vsi_manage_vlan_stripping() to enable/disable when adding and deleting a VLAN respectively. This is wrong because adding/deleting VLANs has nothing to do with configuring VLAN stripping. VLAN stripping is configured through the following VIRTCHNL operations: VIRTCHNL_OP_ENABLE_VLAN_STRIPPING VIRTCHNL_OP_DISABLE_VLAN_STRIPPING Unfortunately we can't just remove this because then stripping will never be configured on VF initialization. Fix this by adding a new function that initializes (disables/enables) VLAN stripping for the VF based on the device supported capabilities. This allows us to remove the call to ice_vsi_manage_vlan_stripping() in ice_vc_process_vlan_msg(). Signed-off-by: Brett Creeley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Disallow VF VLAN opcodes if VLAN offloads disabledBrett Creeley1-0/+29
Currently if the host disables VLAN offloads on the VF by not setting the VIRTCHNL_VF_OFFLOAD_VLAN capability bit we will still honor VF VLAN configuration messages over VIRTCHNL. These messages (i.e. enable/disable VLAN stripping and VLAN filtering) should be blocked when the feature is not supported. Fix that by adding a helper function to determine if the VF is allowed to do VLAN operations based on the host's VF configuration. Also, mirror the VF communicated capabilities in the host's VF configuration. Signed-off-by: Brett Creeley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Correct capabilities reporting of max TCsBruce Allan1-0/+12
Firmware always returns 8 as the max number of supported TCs. However on devices with more than 4 ports, the maximum number of TCs per port is limited to 4. Check and, if necessary, correct the reporting of capabilities for devices with more than 4 ports. Signed-off-by: Bruce Allan <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Store number of functions for the deviceBruce Allan2-11/+11
Store the number of functions the device has and use this number when setting safe mode capabilities instead of calculating it. Signed-off-by: Bruce Allan <[email protected]> Co-developed-by: Kevin Scott <[email protected]> Signed-off-by: Kevin Scott <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22net: dsa: ocelot: fix "should it be static?" warningsChen Wandun1-2/+2
Fix following sparse warnings: drivers/net/dsa/ocelot/felix.c:351:6: warning: symbol 'felix_txtstamp' was not declared. Should it be static? Signed-off-by: Chen Wandun <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22r8152: avoid to call napi_disable twiceHayes Wang1-8/+20
Call napi_disable() twice would cause dead lock. There are three situations may result in the issue. 1. rtl8152_pre_reset() and set_carrier() are run at the same time. 2. Call rtl8152_set_tunable() after rtl8152_close(). 3. Call rtl8152_set_ringparam() after rtl8152_close(). For #1, use the same solution as commit 84811412464d ("r8152: Re-order napi_disable in rtl8152_close"). For #2 and #3, add checking the flag of IFF_UP and using napi_disable/napi_enable during mutex. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22can: m_can_platform: remove unnecessary m_can_class_resume() callPankaj Sharma1-2/+0
The function m_can_runtime_resume() is getting recursively called from m_can_class_resume(). This results in a lock up. We need not call m_can_class_resume() during m_can_runtime_resume(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <[email protected]> Signed-off-by: Sriram Dash <[email protected]> Acked-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-11-22can: m_can_platform: set net_device structure as driver dataPankaj Sharma1-1/+1
The current code is failing during clock prepare enable because of not getting proper clock from platform device. [ 0.852089] Call trace: [ 0.854516] 0xffff0000fa22a668 [ 0.857638] clk_prepare+0x20/0x34 [ 0.861019] m_can_runtime_resume+0x2c/0xe4 [ 0.865180] pm_generic_runtime_resume+0x28/0x38 [ 0.869770] __rpm_callback+0x16c/0x1bc [ 0.873583] rpm_callback+0x24/0x78 [ 0.877050] rpm_resume+0x428/0x560 [ 0.880517] __pm_runtime_resume+0x7c/0xa8 [ 0.884593] m_can_clk_start.isra.9.part.10+0x1c/0xa8 [ 0.889618] m_can_class_register+0x138/0x370 [ 0.893950] m_can_plat_probe+0x120/0x170 [ 0.897939] platform_drv_probe+0x4c/0xa0 [ 0.901924] really_probe+0xd8/0x31c [ 0.905477] driver_probe_device+0x58/0xe8 [ 0.909551] device_driver_attach+0x68/0x70 [ 0.913711] __driver_attach+0x9c/0xf8 [ 0.917437] bus_for_each_dev+0x50/0xa0 [ 0.921251] driver_attach+0x20/0x28 [ 0.924804] bus_add_driver+0x148/0x1fc [ 0.928617] driver_register+0x6c/0x124 [ 0.932431] __platform_driver_register+0x48/0x50 [ 0.937113] m_can_plat_driver_init+0x18/0x20 [ 0.941446] do_one_initcall+0x4c/0x19c [ 0.945259] kernel_init_freeable+0x1d0/0x280 [ 0.949591] kernel_init+0x10/0x100 [ 0.953057] ret_from_fork+0x10/0x18 [ 0.956614] Code: 00000000 00000000 00000000 00000000 (fa22a668) [ 0.962681] ---[ end trace 881f71bd609de763 ]--- [ 0.967301] Kernel panic - not syncing: Attempted to kill init! A device driver for CAN controller hardware registers itself with the Linux network layer as a network device. So, the driver data for m_can should ideally be of type net_device. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <[email protected]> Signed-off-by: Sriram Dash <[email protected]> Acked-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-11-22virt_wifi: fix use-after-free in virt_wifi_newlink()Taehee Yoo1-2/+2
When virt_wifi interface is created, virt_wifi_newlink() is called and it calls register_netdevice(). if register_netdevice() fails, it internally would call ->priv_destructor(), which is virt_wifi_net_device_destructor() and it frees netdev. but virt_wifi_newlink() still use netdev. So, use-after-free would occur in virt_wifi_newlink(). Test commands: ip link add dummy0 type dummy modprobe bonding ip link add bonding_masters link dummy0 type virt_wifi Splat looks like: [ 202.220554] BUG: KASAN: use-after-free in virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.221659] Read of size 8 at addr ffff888061629cb8 by task ip/852 [ 202.222896] CPU: 1 PID: 852 Comm: ip Not tainted 5.4.0-rc5 #3 [ 202.223765] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 202.225073] Call Trace: [ 202.225532] dump_stack+0x7c/0xbb [ 202.226869] print_address_description.constprop.5+0x1be/0x360 [ 202.229362] __kasan_report+0x12a/0x16f [ 202.230714] kasan_report+0xe/0x20 [ 202.232595] virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.233370] __rtnl_newlink+0xb9f/0x11b0 [ 202.244909] rtnl_newlink+0x65/0x90 [ ... ] Cc: [email protected] Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by: Taehee Yoo <[email protected]> Link: https://lore.kernel.org/r/[email protected] [trim stack dump a bit] Signed-off-by: Johannes Berg <[email protected]>
2019-11-21hv_netvsc: Fix send_table offset in case of a host bugHaiyang Zhang1-2/+14
If negotiated NVSP version <= NVSP_PROTOCOL_VERSION_6, the offset may be wrong (too small) due to a host bug. This can cause missing the end of the send indirection table, and add multiple zero entries from leading zeros before the data region. This bug adds extra burden on channel 0. So fix the offset by computing it from the data structure sizes. This will ensure netvsc driver runs normally on unfixed hosts, and future fixed hosts. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21hv_netvsc: Fix offset usage in netvsc_send_table()Haiyang Zhang2-9/+20
To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21enetc: make enetc_setup_tc_mqprio staticMao Wenan1-1/+1
While using ARCH=mips CROSS_COMPILE=mips-linux-gnu- command to compile, make C=2 drivers/net/ethernet/freescale/enetc/enetc.o one warning can be found: drivers/net/ethernet/freescale/enetc/enetc.c:1439:5: warning: symbol 'enetc_setup_tc_mqprio' was not declared. Should it be static? This patch make symbol enetc_setup_tc_mqprio static. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Mao Wenan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21hv_netvsc: Add the support of hibernationDexuan Cui2-0/+60
The existing netvsc_detach() and netvsc_attach() APIs make it easy to implement the suspend/resume callbacks. Signed-off-by: Dexuan Cui <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
2019-11-21net: dsa: ocelot: add hardware timestamping support for FelixYangbo Lu1-0/+89
This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21net: dsa: ocelot: define PTP registers for felix_vsc9959Yangbo Lu1-0/+16
This patch is to define PTP registers for felix_vsc9959. Signed-off-by: Yangbo Lu <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21net: mscc: ocelot: convert to use ocelot_port_add_txtstamp_skb()Yangbo Lu1-16/+27
Convert to use ocelot_port_add_txtstamp_skb() for adding skbs which require TX timestamp into list. Export it so that DSA Felix driver could reuse it too. Signed-off-by: Yangbo Lu <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21net: mscc: ocelot: convert to use ocelot_get_txtstamp()Yangbo Lu3-60/+61
The method getting TX timestamp by reading timestamp FIFO and matching skbs list is common for DSA Felix driver too. So move code out of ocelot_board.c, convert to use ocelot_get_txtstamp() function and export it. Signed-off-by: Yangbo Lu <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21net: mscc: ocelot: export ocelot_hwstamp_get/set functionsYangbo Lu1-4/+4
Export ocelot_hwstamp_get/set functions so that DSA driver is able to reuse them. Signed-off-by: Yangbo Lu <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21sfc: Only cancel the PPS workqueue if it existsMartin Habets1-1/+2
The workqueue only exists for the primary PF. For other functions we hit a WARN_ON in kernel/workqueue.c. Fixes: 7c236c43b838 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by: Martin Habets <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21drivers: net: Fix Kconfig indentation, continuedKrzysztof Kozlowski10-149/+149
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21octeontx2-af: Fix uninitialized variable in debugfsDan Carpenter1-1/+2
If rvu_get_blkaddr() fails, then this rvu_cgx_nix_cuml_stats() returns zero and we write some uninitialized data into the debugfs output. On the error paths, the use of the uninitialized "*stat" is harmless, but it will lead to a Smatch warning (static analysis) and a UBSan warning (runtime analysis) so we should prevent that as well. Fixes: f967488d095e ("octeontx2-af: Add per CGX port level NIX Rx/Tx counters") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21mt76: fix fix ampdu lockingMarkus Theil3-6/+12
The current ampdu locking code does not unlock its mutex in the early return case. This patch fixes it. Signed-off-by: Markus Theil <[email protected]> Acked-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-20net: sfp: soft status and control supportRussell King1-20/+90
Add support for the soft status and control register, which allows TX_FAULT and RX_LOS to be monitored and TX_DISABLE to be set. We make use of this when the board does not support GPIOs for these signals. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-20net: sfp: add some quirks for GPON modulesRussell King1-0/+25
Marc Micalizzi reports that Huawei MA5671A and Alcatel/Lucent G-010S-P modules are capable of 2500base-X, but incorrectly report their capabilities in the EEPROM. It seems rather common that GPON modules mis-report. Let's fix these modules by adding some quirks. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.