| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When the Felix driver would probe the ports and verify functionality, it
would fail if it hit single port mode that wasn't supported by the driver.
The initial case for the VSC7512 driver will have physical ports that
exist, but aren't supported by the driver implementation. Add the
OCELOT_PORT_MODE_NONE macro to handle this scenario, and allow the Felix
driver to continue with all the ports that are currently functional.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # regression
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The architecture around the VSC7512 differs from existing felix drivers. In
order to add support for all the chip's features (pinctrl, MDIO, gpio) the
device had to be laid out as a multi-function device (MFD).
One difference between an MFD and a standard platform device is that the
regmaps are allocated to the parent device before the child devices are
probed. As such, there is no need for felix to initialize new regmaps in
these configurations, they can simply be requested from the parent device.
Add support for MFD configurations by performing this request from the
parent device.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # regression
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The define FELIX_MAC_QUIRKS was used directly in the felix.c shared driver.
Other devices (VSC7512 for example) don't require the same quirks, so they
need to be configured on a per-device basis.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # regression
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The VSC7514 target regmap is identical for ones shared with similar
hardware, specifically the VSC7512. Share this resource, and change the
name to match the pattern of other exported resources.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # regression
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Resetting the switch core is the same whether it is done internally or
externally. Move this routine to the ocelot library so it can be used by
other drivers.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # regression
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The vcap_props structure is common to other devices, specifically the
VSC7512 chip that can only be controlled externally. Export this structure
so it doesn't need to be recreated.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # regression
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ocelot_regfields struct is common between several different chips, some
of which can only be controlled externally. Export this structure so it
doesn't have to be duplicated in these other drivers.
Rename the structure as well, to follow the conventions of other shared
resources.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # regression
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Expose ocelot_wm functions so they can be shared with other drivers.
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Tested-by: Vladimir Oltean <[email protected]> # regression
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The phy id is usually defined in lower case.
Signed-off-by: Frank Sae <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
CHECK: 'sentinal' may be misspelled - perhaps 'sentinel'?
Signed-off-by: Frank Sae <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The function __b44_cam_read() is defined in the b44.c file, but not called
elsewhere, so remove this unused function.
drivers/net/ethernet/broadcom/b44.c:199:20: warning: unused function '__b44_cam_read'.
Reported-by: Abaci Robot <[email protected]>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3858
Signed-off-by: Jiapeng Chong <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-27 (ice)
This series contains updates to ice driver only.
Dave prevents modifying channels when RDMA is active as this will break
RDMA traffic.
Michal fixes a broken URL.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix broken link in ice NAPI doc
ice: Prevent set_channel from changing queues while RDMA active
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As the fast DEK update is fully implemented, use it for kTLS to get
better performance.
TIS pool was already supported to recycle the TISes. With this series
and TIS pool, TLS CPS is improved by 9x higher, from 11k/s to 101k/s.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
One bulk with full available keys is left undestroyed, to service the
possible requests from users quickly.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
After invalidation, the idle bulk with all DEKs available for use, is
destroyed, to free keys and mem.
To get better performance, the firmware destruction operation is done
asynchronously. So idle bulks are enqueued in destroy_list first, then
destroyed in system workqueue. This will improve performance, as the
destruction doesn't need to hold pool's mutex.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
To fast update encryption keys, those freed keys with need_sync bit 1
and in_use bit 0 in a bulk, can be recycled. The keys are cached
internally by the NIC, so invalidating internal NIC caches by
SYNC_CRYPTO command is required before reusing them. A threshold in
driver is added to avoid invalidating for every update. Only when the
number of DEKs, which need to be synced, is over this threshold, the
sync process will start. Besides, it is done in system workqueue.
After SYNC_CRYPTO command is executed successfully, the bitmaps of
each bulk must be reset accordingly, so that the freed DEKs can be
reused. From the analysis in previous patch, the number of reused DEKs
can be calculated by hweight_long(need_sync XOR in_use), and the
need_sync bits can be reset by simply copying from in_use bits.
Two more list (avail_list and sync_list) are added for each pool. The
avail_list is for a bulk when all bits in need_sync are reset after
sync. If there is no avail deks, and all are be freed by users, the
bulk is moved to sync_list, instead of being destroyed in previous
patch, and waiting for the invalidation. While syncing, they are
simply reset need_sync bits, and moved to avail_list.
Besides, add a wait_for_free list for the to-be-free DEKs. It is to
avoid this corner case: when thread A is done with SYNC_CRYPTO but just
before starting to reset the bitmaps, thread B is alloc dek, and free
it immediately. It's obvious that this DEK can't be reused this time,
so put it to waiting list, and do free after bulk bitmaps reset is
finished.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
We create a pool for each key type. For the pool, there is a struct
to store the info for all DEK objects of one bulk allocation. As we
use crypto->log_dek_obj_range, which is set to 12 in previous patch,
for the log_obj_range of bulk allocation, 4096 DEKs are allocated in
one time.
To trace the state of all the keys in a bulk, two bitmaps are created.
The need_sync bitmap is used to indicate the available state of the
corresponding key. If the bit is 0, it can be used (available) as it
either is newly created by FW, or SYNC_CRYPTO is executed and bit is
reset after it is freed by upper layer user (this is the case to be
handled in later patch). Otherwise, the key need to be synced. The
in_use bitmap is used to indicate the key is being used, and reset
when user free it.
When ktls, ipsec or macsec need a key from a bulk, it get one with
need_sync bit 0, then set both need_sync and in_used bit to 1. When
user free a key, only in_use bit is reset to 0. So, for the
combinations of (need_sync, in_use) of one DEK object,
- (0,0) means the key is ready for use,
- (1,1) means the key is currently being used by a user,
- (1,0) means the key is freed, and waiting for being synced,
- (0,1) is invalid state.
There are two lists in each pool, partial_list and full_list,
according to the number for available DEKs in a bulk. When user need a
key, it get a bulk, either from partial list, or create new one from
FW. Then the bulk is put in the different pool's lists according to
the num of avail deks it has. If there is no avail deks, and all of
them are be freed by users, for now, the bulk is destroyed.
To speed up the bitmap search, a variable (avail_start) is added to
indicate where to start to search need_sync bitmap for available key.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
To support fast update of keys into hardware, we optimize firmware to
achieve the maximum rate. The approach is to create DEK objects in
bulk, and update each of them with modify command.
This patch supports bulk allocation and modify_dek commands for new
firmware. However, as log_obj_range is 0 for now, only one DEK obj is
allocated each time, and then updated with user key by modify_dek.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add support for SYNC_CRYPTO command. For now, it is executed only when
initializing DEK, but needed when reusing keys in later patch.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
New APIs are added to support fast update DEKs. As a pool is created
for each key purpose (type), one pair of pool APIs to get/put pool.
Anotehr pair of DEKs APIs is to get DEK object from pool and update it
with user key, or free it back to the pool. As The bulk allocation
and destruction will be supported in later patches, old implementation
is used here.
To support these APIs, pool and dek structs are defined first. Only
small number of fields are stored in them. For example, key_purpose
and refcnt in pool struct, DEK object id in dek struct. More fields
will be added to these structs in later patches, for example, the
different bulk lists for pool struct, the bulk pointer dek struct
belongs to, and a list_entry for the list in a pool, which is used to
save keys waiting for being freed while other thread is doing sync.
Besides the creation and destruction interfaces, new one is also added
to get obj id.
Currently these APIs are planned to used by TLS only.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Move the common code to general functions which can be used by fast
update encryption key in later patches.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Change key pointer to const void *, as there is no need to change the
key content. This is also to avoid modifying the key by mistake.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add CAP for crypto offload, do the simple initialization if hardware
supports it. Currently set log_dek_obj_range to 12, so 4k DEKs will be
created in one bulk allocation.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Change the naming of key type in DEK fields and macros, to be
consistent with the device spec.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Before this patch, the log_obj_range was defined inside
general_obj_in_cmd_hdr to support bulk allocation. However, we need to
modify/query one of the object in the bulk in later patch, so change
those fields to param bits for parameters specific for cmd header, and
add general_obj_create_param according to what was updated in spec.
We will also add general_obj_query_param for modify/query later.
Signed-off-by: Jianbo Liu <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Take crypto API out of the generic mlx5.h header into a dedicated
header.
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Jianbo Liu <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Tested-by: Marek Szlosek <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Tony Nguyen <[email protected]>
|
|
pci_enable_pcie_error_reporting() enables the device to send ERR_*
Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is
native"), the PCI core does this for all devices during enumeration.
Remove the redundant pci_enable_pcie_error_reporting() call from the
driver. Also remove the corresponding pci_disable_pcie_error_reporting()
from the driver .remove() path.
Note that this doesn't control interrupt generation by the Root Port; that
is controlled by the AER Root Error Command register, which is managed by
the AER service driver.
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The rfkill() callback was invoked with wrong parameters.
It was missed since MEI is defined now as depending on BROKEN.
Fix that.
Fixes: d288067ede4b ("wifi: iwlwifi: mei: avoid blocking sap messages handling due to rtnl lock")
Fixes: 5aa7ce31bd84 ("wifi: iwlwifi: mei: make sure ownership confirmed message is sent")
Fixes: 95170a46b7dd ("wifi: iwlwifi: mei: don't send SAP commands if AMT is disabled")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Read the STEP equalizer parameters from the BIOS during init
and transfer it to the firmware.
This table provides values to configure an equalizer at the transmitter
that can be used to compensate for PCB channel attenuation.
Signed-off-by: Ayala Barazani <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.f25f871c5e17.I8390ab916c8f681229433ebc576ed37a594c6d30@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Start supporting API version 74 for AX devices.
Signed-off-by: Golan Ben Ami <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.80012ee4c5d6.I45ba1f8bf923d242ef2ffeb160d736120c8add65@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Setting rate index should not depend on net_ratelimit().
Fix that for the case of invalid rate.
Signed-off-by: Mukesh Sisodiya <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.8eede67758bb.I585ab389e27d61153540b7cb5ebed66e21f765f0@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Instead of calculating the offset to the 802.11 header based on radiotap
bits and length, shorten the code path by always setting the MAC header
in the skb and using skb_mac_header().
Signed-off-by: Mordechay Goodstein <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.3ec5493934a4.I1d41a2af28588b5899fcd2402f8c4bd8cc29a12e@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
We add TSF overwrite for EHT MU/TB high and low, and add definitions
for EHT Data 5 meta data.
Signed-off-by: Mordechay Goodstein <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.6729c0be66aa.I95ad94d5e137ec80010facd8ee57cd40461a0721@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Start by adding a parsing option for all the new fields coming from FW
and checking that we have the right version for parsing EHT.
Signed-off-by: Mordechay Goodstein <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.ba9b364fbacf.I469af2a07b3ff51cbd8d67e572478f4c56ce22ba@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Non-QOS nullfunc frames should be sent on MGMT queue similarly to
the QOS nullfunc frames. It means that the corresponding TID should
remain IWL_MAX_TID_COUNT. Make the condition more strict, so the TID
won't be changed to IWL_TID_NON_QOS.
Link: https://lore.kernel.org/r/20230127002430.a05bf77c9e29.I06262424878232b46fecd58743c889e4c3216bbf@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
This change fixes the checkpatch warning described in this commit
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.a25158d58fd7.Ibfe217f12a63c1d5349218e74c4b802c70c13c7c@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
We can remove the intermediary string conversion and use drv->fw_index
in the final snprintf directly.
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.175bfffdf2f5.I7ec7a29b2d93a977cb0a39dbcc7c875032eb14b7@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Add a comment to mention the structure used for the response for the
flush command.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.422c9fbac12c.I2da0954d1c62007b5f01faf06df3e4081e52204f@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Now with all the prework, this is fairly simple, just report the
new bandwidth and RX_ENC_EHT type in RX, and for now just do a
minimal report of the EHT TLC rate in iwl_mvm_set_sta_rate().
Signed-off-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/20230109130329.5f34d73d1f74.Ib27ae7bd23bc152d61021fd73aabdc76679b9fe4@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
Commit bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev")
introduced a link between net devices and phy devices. It fails to check
whether dev is NULL, leading to a NULL dereference error.
Fixes: bc66fa87d4fd ("net: phy: Add link between phy dev and mac dev")
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Devlink features were introduced to disallow devlink reload calls of
userspace before the devlink was fully initialized. The reason for this
workaround was the fact that devlink reload was originally called
without devlink instance lock held.
However, with recent changes that converted devlink reload to be
performed under devlink instance lock, this is redundant so remove
devlink features entirely.
Note that mlx5 used this to enable devlink reload conditionally only
when device didn't act as multi port slave. Move the multi port check
into mlx5_devlink_reload_down() callback alongside with the other
checks preventing the device from reload in certain states.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This enhances the KUNIT test of the VCAP API with tests of the chaining
functionality.
Signed-off-by: Steen Hegelund <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This enables the TC command to use the Sparx5 ES2 VCAP, and provides a new
ES2 ethertype table and handling of rule links between IS0 and ES2.
Signed-off-by: Steen Hegelund <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|