| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This makes it easier to understand which values are allowed for the
"queue" variable when using the enum instead of an u8.
Acked-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
rtw_hw_queue_mapping() and ac_to_hwq[] hold values of type enum
rtw_tx_queue_type. Change their types to reflect this to make it easier
to understand this part of the code.
While here, also change the array to be static const as it is not
supposed to be modified at runtime.
Signed-off-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It should be "broadcast".
Signed-off-by: Jonathan Neuschäfer <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add compatibility with WPS by passing on WPS enrollee information in
probe requests. Ignore other IEs supplied in the scan request. This also
has the added benefit of restoring compatibility with newer
wpa_supplicant versions that always add scan IEs. Previously, with
max_scan_ie_len set to 0, scans would always fail.
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Doug Brown <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a define for the TLV type that will be used to add WPS enrollee
information to probe requests.
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Doug Brown <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The existing code only converts the first IE to a TLV, but it returns a
value that takes the length of all IEs into account. When there is more
than one IE (which happens with modern wpa_supplicant versions for
example), the returned length is too long and extra junk TLVs get sent
to the firmware, resulting in an association failure.
Fix this by finding the first RSN or WPA IE and only adding that. This
has the extra benefit of working properly if the RSN/WPA IE isn't the
first one in the IE buffer.
While we're at it, clean up the code to use the available structs like
the other lbs_add_* functions instead of directly manipulating the TLV
buffer.
Signed-off-by: Doug Brown <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Several of the structs are using the deprecated convention of items[1]
for a dynamically sized trailing element. Convert these structs to the
modern C99 style of items[]. Also fix a couple of camel case struct
element names.
Signed-off-by: Doug Brown <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
mt76 patches for 6.3
- fixes
- mt7996 cleanups
- switch to page pool allocator
- mt7996 eht support
- WED reset support
|
|
All preparations are done. Now we can start using new functions and remove
the old code.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Reduce code duplicated by migrating phy_init_eee() to
genphy_c45_eee_is_active().
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv().
It should work as before except write operation to the EEE adv registers
will be done only if some EEE abilities was detected.
If some driver will have a regression, related driver should provide own
.get_features callback. See micrel.c:ksz9477_get_features() as example.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Migrate from genphy_config_eee_advert() to genphy_c45_write_eee_adv().
It should work as before except write operation to the EEE adv registers
will be done only if some EEE abilities was detected.
If some driver will have a regression, related driver should provide own
.get_features callback. See micrel.c:ksz9477_get_features() as example.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add replacement for phy_ethtool_get/set_eee() functions.
Current phy_ethtool_get/set_eee() implementation is great and it is
possible to make it even better:
- this functionality is for devices implementing parts of IEEE 802.3
specification beyond Clause 22. The better place for this code is
phy-c45.c
- currently it is able to do read/write operations on PHYs with
different abilities to not existing registers. It is better to
use stored supported_eee abilities to avoid false read/write
operations.
- the eee_active detection will provide wrong results on not supported
link modes. It is better to validate speed/duplex properties against
supported EEE link modes.
- it is able to support only limited amount of link modes. We have more
EEE link modes...
By refactoring this code I address most of this point except of the last
one. Adding additional EEE link modes will need more work.
Signed-off-by: Oleksij Rempel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This function will be needed for genphy_c45_ethtool_get_eee() provided
by next patch.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
KSZ8563R, which has same PHYID as KSZ9477 family, will change "EEE control
and capability 1" (Register 3.20) content depending on configuration of
"EEE advertisement 1" (Register 7.60). Changes on the 7.60 will affect
3.20 register.
So, instead of depending on register 3.20, driver should set supported_eee.
Proper supported_eee configuration is needed to make use of generic
PHY c45 set/get_eee functions provided by next patches.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add generic function for EEE abilities defined by IEEE 802.3
specification. For now following registers are supported:
- IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20)
- IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
(Register 1.2295)
Since I was not able to find any flag signaling support of these
registers, we should detect link mode abilities first and then based on
these abilities doing EEE link modes detection.
Results of EEE ability detection will be stored into new variable
phydev->supported_eee.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some of KSZ9477 family switches provides EEE support. To enable it, we
just need to register set_mac_eee/set_mac_eee handlers and validate
supported chip version and port.
Currently supported chip variants are: KSZ8563, KSZ9477, KSZ9563,
KSZ9567, KSZ9893, KSZ9896, KSZ9897. KSZ8563 supports EEE only with
100BaseTX/Full. Other chips support 100BaseTX/Full and 1000BaseTX/Full.
Low Power Idle configuration is not supported and currently not
documented in the datasheets.
EEE PHY specific tunings are not documented in the switch datasheets, but can
overlap with KSZ9131 specification.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Arun Ramadoss <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The ionic device has on-board memory (CMB) that can be used
for descriptors as a way to speed descriptor access for faster
packet processing. It is rumored to improve latency and/or
packets-per-second for some profiles of small packet traffic,
although your mileage may vary.
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Minor Code cleanup details.
Signed-off-by: Shannon Nelson <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We have the pointer already, don't need to go through the
lif struct for it.
Signed-off-by: Shannon Nelson <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch removes the temporary scaffolding now that the comletion
function signature has been converted.
Signed-off-by: Herbert Xu <[email protected]>
|
|
This patch adds temporary scaffolding so that the Crypto API
completion function can take a void * instead of crypto_async_request.
Once affected users have been converted this can be removed.
Signed-off-by: Herbert Xu <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
In bnxt_reserve_rings(), there is logic to check that the number of TX
rings reserved is enough to cover all the mqprio TCs, but it fails to
account for the TX XDP rings. So the check will always fail if there
are mqprio TCs and TX XDP rings. As a result, the driver always fails
to initialize after the XDP program is attached and the device will be
brought down. A subsequent ifconfig up will also fail because the
number of TX rings is set to an inconsistent number. Fix the check to
properly account for TX XDP rings. If the check fails, set the number
of TX rings back to a consistent number after calling netdev_reset_tc().
Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.")
Reviewed-by: Hongguang Gao <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the remaining GSI register offset definitions. Use gsi_reg()
rather than the corresponding GSI_*_OFFSET() macros to get the
offsets for these registers, and get rid of the macros.
Note that we are now defining information for the HW_PARAM_2
register, and that doesn't appear until IPA v3.5.1.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The next patch adds a GSI register field that is only valid starting
at IPA v3.5.1. Create "gsi_v3.5.1.c" from "gsi_v3.1.c", changing
only the name of the public regs structure it defines.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add definitions of the offsets for IRQ-related GSI registers. Use
gsi_reg() rather than the corresponding GSI_CNTXT_*_OFFSET() macros
to get the offsets for these registers, and get rid of the macros.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add definitions of the offsets and strides for registers whose
offset depends on an event ring ID, and use gsi_reg() and its
returned value to determine offsets for these registers. Get
rid of the corresponding GSI_EV_CH_E_*_OFFSET() macros.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Continue populating with GSI register definitions, adding remaining
registers whose offset depends on a channel ID. Use gsi_reg() and
reg_n_offset() to determine offsets for those registers, and get rid
of the corresponding GSI_CH_C_*_OFFSET() macros.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Create a new register definition file in the "reg" subdirectory,
and begin populating it with GSI register definitions based on IPA
version. The GSI registers haven't changed much, so several IPA
versions can share the same GSI register definitions.
As with IPA registers, an array of pointers indexed by GSI register ID
refers to these register definitions, and a new "regs" field in the
GSI structure is initialized in gsi_reg_init() to refer to register
information based on the IPA version (though for now there's only
one). The new function gsi_reg() returns register information for
a given GSI register, and the result can be used to look up that
register's offset.
This patch is meant only to put the infrastructure in place, so only
eon register (CH_C_QOS) is defined for each version, and only the
offset and stride are defined for that register. Use new function
gsi_reg() to look up that register's information to get its offset,
This makes the GSI_CH_C_QOS_OFFSET() unnecessary, so get rid of it.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Create a new gsi_reg_id enumerated type, which identifies each GSI
register with a symbolic identifier.
Create a function that indicates whether a register ID is valid.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Create a new source file "gsi_reg.c", and in it, introduce a new
function to encapsulate initializing GSI registers, including
looking up and I/O mapping their memory.
Create gsi_reg_exit() as the inverse of the init function.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for PHC and timestamping operations for the lan8841 PHY.
PTP 1-step and 2-step modes are supported, over Ethernet and UDP both
ipv4 and ipv6.
Signed-off-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for the following modes to the nfp driver:
NFP_MEDIA_10GBASE_LR
NFP_MEDIA_25GBASE_LR
NFP_MEDIA_25GBASE_ER
These modes are supported by the hardware and,
support for them was recently added to firmware.
Signed-off-by: Yu Xiao <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
syzbot reported that act_len in kalmia_send_init_packet() is
uninitialized when passing it to the first usb_bulk_msg error path. Jiri
Pirko noted that it's pointless to pass it in the error path, and that
the value that would be printed in the second error path would be the
value of act_len from the first call to usb_bulk_msg.[1]
With this in mind, let's just not pass act_len to the usb_bulk_msg error
paths.
1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/
Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Reported-and-tested-by: [email protected]
Signed-off-by: Miko Larsson <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
iwlwifi updates towards v6.3, this patch-set contains:
* EHT rate reporting
* Sniffer support for EHT and a few fixes in the related code
* A few general cleanups and small bugfixes
* Bump FW API to 74 for AX devices
* Fix a compilation error in mei (it still depends on BROKEN)
* STEP equalizer support - transfer some Phy related parameters from
the BIOS to the firmware
|
|
The result of nlmsg_find_attr() 'br_spec' is dereferenced in
nla_for_each_nested(), but it can take NULL value in nla_find() function,
which will result in an error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops")
Signed-off-by: Natalia Petrova <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-02-09 (i40e)
Jan removes i40e_status from the driver; replacing them with standard
kernel error codes.
Kees Cook replaces 0-length array with flexible array.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
net/i40e: Replace 0-length array with flexible array
i40e: use ERR_PTR error print in i40e messages
i40e: use int for i40e_status
i40e: Remove string printing for i40e_status
i40e: Remove unused i40e status codes
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In the previous code, TX timestamp accuracy was bad because the irq
handler got the timestamp from the timestamp register at that time.
This hardware has "Timestamp capture" feature which can store
each TX timestamp into the timestamp descriptors. To improve
TX timestamp accuracy, implement timestamp descriptors' handling.
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In the previous code, the gptp flag was completely related to
the !dir_tx in struct rswitch_gwca_queue because
rswitch_gwca_queue_alloc() was called below:
< In rswitch_txdmac_alloc() >
err = rswitch_gwca_queue_alloc(ndev, priv, rdev->tx_queue, true, false,
TX_RING_SIZE);
So, dir_tx = true, and gptp = false.
< In rswitch_rxdmac_alloc() >
err = rswitch_gwca_queue_alloc(ndev, priv, rdev->rx_queue, false, true,
RX_RING_SIZE);
So, dir_tx = false, and gptp = true.
In the future, a new queue handling for timestamp will be implemented
and this gptp flag is confusable. So, remove the gptp flag.
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To improve readability, move linkfix related variables to
struct rswitch_gwca. Also, rename function names "desc" with "linkfix".
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To add a new ring which is really related to timestamp (ts_ring)
in the future, rename the following members to improve readability:
ring --> tx_ring
ts_ring --> rx_ring
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Incrementation of xsk_frames inside the for-loop produces
infinite loop, if we have both normal AF_XDP-TX and XDP_TXed
buffers to complete.
Split xsk_frames into 2 variables (xsk_frames and completed_frames)
to eliminate this bug.
Fixes: 29322791bc8b ("ice: xsk: change batched Tx descriptor cleaning")
Acked-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Acked-by: Tony Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This function always returns success. We need to preserve the error
code before setting rx_ring->page_pool = NULL.
Fixes: 850b971110b2 ("net: libwx: Allocate Rx and Tx resources")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/Y+T4aoefc1XWvGYb@kili
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
A new user of MSCC_OCELOT_SWITCH_LIB was added, bringing back an old
link failure that was fixed with e5f31552674e ("ethernet: fix
PTP_1588_CLOCK dependencies"):
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_ptp_enable':
ocelot_ptp.c:(.text+0x8ee): undefined reference to `ptp_find_pin'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_get_ts_info':
ocelot_ptp.c:(.text+0xd5d): undefined reference to `ptp_clock_index'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_init_timestamp':
ocelot_ptp.c:(.text+0x15ca): undefined reference to `ptp_clock_register'
x86_64-linux-ld: drivers/net/ethernet/mscc/ocelot_ptp.o: in function `ocelot_deinit_timestamp':
ocelot_ptp.c:(.text+0x16b7): undefined reference to `ptp_clock_unregister'
Add the same PTP dependency here, as well as in the MSCC_OCELOT_SWITCH_LIB
symbol itself to make it more obvious what is going on when the next
driver selects it.
Fixes: 3d7316ac81ac ("net: dsa: ocelot: add external ocelot switch control")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Colin Foster <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In TI's AM62x/AM64x SoCs, successful teardown of RX DMA Channel raises an
interrupt. The process of servicing this interrupt involves flushing all
pending RX DMA descriptors and clearing the teardown completion marker
(TDCM). The am65_cpsw_nuss_rx_packets() function invoked from the RX
NAPI callback services the interrupt. Thus, it is necessary to wait for
this handler to run, drain all packets and clear TDCM, before calling
napi_disable() in am65_cpsw_nuss_common_stop() function post channel
teardown. If napi_disable() executes before ensuring that TDCM is
cleared, the TDCM remains set when the interfaces are down, resulting in
an interrupt storm when the interfaces are brought up again.
Since the interrupt raised to indicate the RX DMA Channel teardown is
specific to the AM62x and AM64x SoCs, add a quirk for it.
Fixes: 4f7cce272403 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g")
Co-developed-by: Vignesh Raghavendra <[email protected]>
Signed-off-by: Vignesh Raghavendra <[email protected]>
Signed-off-by: Siddharth Vadapalli <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d01 ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/[email protected]/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Rename functions related to register fields so they don't appear to
be IPA-specific, and move their definitions into "reg.h":
ipa_reg_fmask() -> reg_fmask()
ipa_reg_bit() -> reg_bit()
ipa_reg_field_max() -> reg_field_max()
ipa_reg_encode() -> reg_encode()
ipa_reg_decode() -> reg_decode()
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Rename ipa_reg_offset() to be reg_offset() and move its definition
to "reg.h". Rename ipa_reg_n_offset() to be reg_n_offset() also.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
IPA register definitions have evolved with each new version. The
changes required to support more than 32 endpoints in IPA v5.0 made
it best to define a unified mechanism for defining registers and
their fields.
GSI register definitions, meanwhile, have remained fairly stable.
And even as the total number of IPA endpoints goes beyond 32, the
number of GSI channels on a given EE that underly endpoints still
remains 32 or less.
Despite that, GSI v3.0 (which is used with IPA v5.0) extends the
number of channels (and events) it supports to be about 256, and as
a result, many GSI register definitions must change significantly.
To address this, we'll use the same "ipa_reg" mechanism to define
the GSI registers.
As a first step in generalizing the "ipa_reg" to also support GSI
registers, isolate the definitions of the "ipa_reg" and "ipa_regs"
structure types (and some supporting macros) into a new header file,
and remove the "ipa_" and "IPA_" from symbol names.
Separate the IPA register ID validity checking from the generic
check that a register ID is in range. Aside from that, this is
intended to have no functional effect on the code.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Move some static inline function definitions out of "gsi_reg.h" and
into "gsi.c", which is the only place they're used. Rename them so
their names identify the register they're associated with.
Move the gsi_channel_type enumerated type definition below the
offset and field definitions for the CH_C_CNTXT_0 register where
it's used.
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|