aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-04-14net/mlx5: DR, Enable patterns and arguments for supporting devicesYevgeny Kliteynik1-1/+2
Check if patterns and arguments for modify header action are supported and enable them accordingly. Signed-off-by: Muhammad Sammar <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Add support for the pattern/arg parameters in debug dumpYevgeny Kliteynik1-3/+27
Support the pattern/args-based MODIFY_HDR and TNL_L3_TO_L2 actions in dbg dump Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Modify header action of size 1 optimizationYevgeny Kliteynik3-25/+52
Set modify header action of size 1 directly on the STE for supporting devices, thus reducing number of hops and cache misses. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Support decap L3 action using pattern / arg mechanismYevgeny Kliteynik1-16/+5
Use the new accelerated action for decap L3 on RX side: use the mechanism of pattern and argument same as in modify-header action. Signed-off-by: Erez Shitrit <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Apply new accelerated modify action and decapl3Yevgeny Kliteynik2-6/+47
If there is support for pattern/args, use the new accelerated modify header action for modify header and decap L3 actions. Otherwise fall back to the old modify-header implementation. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Add modify header argument pointer to actions attributesYevgeny Kliteynik3-7/+42
While building the actions, add the pointer of the arguments for accelerated modify list action into the action's attributes. This will be used later on while building the specific STE for this action. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Add modify header arg pool mechanismYevgeny Kliteynik4-1/+304
Added new mechanism for handling arguments for modify-header action. The new action "accelerated modify-header" asks for the arguments from separated area from the pattern, this area accessed via general objects. Handling of these object is done via the pool-manager struct. When the new header patterns are supported, while loading the domain, a few pools for argument creations will be created. The requests for allocating/deallocating arg objects are done via the pool manager API. Signed-off-by: Muhammad Sammar <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Fix QP continuous allocationYevgeny Kliteynik1-1/+1
When allocating a QP we allocate an RQ and an SQ, the RQ is stored first in memory and followed by the SQ. This allocation is not physically continiuos - it may span across different physical pages. SW Steering code always writes in pairs: 1BB write + 1BB read, or 2 continuous BBs of GTA WQE. This lead to an issue where RQ allocation was 4x16 which is equal to 1 WQE BB, causing 1 BB offset in the page and splitting the GTA WQE between different physical pages. The solution was to create the RQ with a even number of BBs and to have the RQ aligned to a page. Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Read ICM memory into dedicated bufferYevgeny Kliteynik2-9/+17
Instead of using the write buffer for reading we will use a dedicated buffer only for reading ICM memory. Due to the new support for args, we can have a case with pending_wc being odd number, and with reading into the same write buffer, it is possible to overwrite next write on the same slot. For example: pending_wc is 17 so the buffer for write is: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | and we have requests as follows: r wr wr wr wr wr wr wr wr Now, the first read will be written into the last write because we use the same buffer for read and write, before it was written to the HW and we will have a wrong data in the ICM area. Signed-off-by: Erez Shitrit <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Add support for writing modify header argumentYevgeny Kliteynik2-20/+150
The accelerated modify header arguments are written in the HW area with special WQE and specific data format. New function was added to support writing of new argument type. Note that GTA WQE is larger than READ and WRITE, so the queue management logic was updated to support this. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Add create/destroy for modify-header-argument general objectYevgeny Kliteynik2-0/+49
Add functions for creation/destruction of the new type of general object. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Check for modify_header_argument device capabilitiesYevgeny Kliteynik2-0/+14
Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Split chunk allocation to HW-dependent waysYevgeny Kliteynik7-18/+98
This way we are able to allocate chunk for modify_headers from 2 types: STEv0 that is allocated from the action area, and STEv1 that is allocating the chunks from the special area for patterns. Signed-off-by: Muhammad Sammar <[email protected]> Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Add cache for modify header patternYevgeny Kliteynik3-0/+236
Starting with ConnectX-6 Dx, we use new design of modify_header FW object. The current modify_header object allows for having only limited number of FW objects, so the new design of pattern and argument allows pattern reuse, saving memory, and having a large number of modify_header objects. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14net/mlx5: DR, Move ACTION_CACHE_LINE_SIZE macro to headerYevgeny Kliteynik2-6/+5
Move ACTION_CACHE_LINE_SIZE macro to header to be used by the pattern functions as well. Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-04-14Merge back Intel thermal control material for 6.4-rc1.Rafael J. Wysocki3-11/+11
2023-04-14Merge tag 'qcom-drivers-for-6.4' of ↵Arnd Bergmann1-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.4 The Qualcomm SCM driver will now always clear the download bit, avoiding entering download mode on a clean reboot because the bootloader left it set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to a well defined size. SM6375 support is added, and SC8180X, QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented. GENI gains support for newer hardware with deeper FIFOs. The BWMON driver is updated to better handle the two register blocks, which are not consistent between MSM8998 and newer platforms. The LLCC driver no longer assumes a fixes stride across the various banks, and instead acquire the bank placement from DeviceTree. EDAC support for polling is introduced. EDAC support on SDM845 is disabled, as its been observed that accessing relevant registers is not permitted on most devices. PMIC GLINK is reworked to support defining which auxiliary children to spawn per platform, support for spawning a UCSI child is added and SM8450 and SM8550 is introduced. The RPM power-domain driver is cleaned up by moving and generalizing structures that are common between platforms, rather than duplicating everything. Macros are replaced with just direct definition of the relevant structures. Support for defining parent relationships between the power-domains is introduced, like it has been in rpmhpd for a long time. Number of processors has gone up, so max processor count in SMEM is bumped again. Error handling in SMSM is cleaned up using dev_err_probe(). Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150, SA8775P and a number of PMICs. * tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits) dt-bindings: firmware: document Qualcomm SC8180X SCM dt-bindings: sram: qcom,imem: document SM6375 IMEM soc: qcom: icc-bwmon: Handle global registers correctly soc: qcom: icc-bwmon: Remove unused struct member soc: qcom: smsm: Use dev_err_probe() firmware: qcom_scm: Add SM6375 compatible soc: qcom: llcc: Add configuration data for SM7150 dt-bindings: arm: msm: Add LLCC for SM7150 dt-bindings: soc: qcom: smd-rpm: re-add missing qcom,rpm-msm8994 soc: qcom: pmic_glink: register ucsi aux device dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible firmware: qcom_scm: Clear download bit during reboot dt-bindings: soc: qcom: aoss: Document QDU1000/QRU1000 compatible dt-bindings: firmware: qcom,scm: Update QDU1000/QRU1000 compatible dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible firmware: qcom_scm: Use fixed width src vm bitmap dt-bindings: firmware: qcom,scm: document IPQ5332 SCM dt-bindings: scm: Add compatible for IPQ9574 soc: qcom: rpmpd: Remove useless comments ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-04-14wifi: rtl8xxxu: Support devices with 5-6 out endpointsBitterblue Smith2-1/+3
Handle them the same way as the devices with 3-4 USB out endpoints. This is needed for the RTL8192FU. Signed-off-by: Bitterblue Smith <[email protected]> Reviewed-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtl8xxxu: Clean up some messy ifsBitterblue Smith6-19/+30
Add some new members to rtl8xxxu_fileops and use them instead of checking priv->rtl_chip. Signed-off-by: Bitterblue Smith <[email protected]> Reviewed-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: brcmfmac: add Cypress 43439 SDIO idsMarek Vasut1-1/+8
Add SDIO ids for use with the muRata 1YN (Cypress CYW43439). The odd thing about this is that the previous 1YN populated on M.2 card for evaluation purposes had BRCM SDIO vendor ID, while the chip populated on real hardware has a Cypress one. The device ID also differs between the two devices. But they are both 43439 otherwise, so add the IDs for both. On-device 1YN (43439), the new one, chip label reads "1YN": ``` /sys/.../mmc_host/mmc2/mmc2:0001 # cat vendor device 0x04b4 0xbd3d ``` EA M.2 evaluation board 1YN (43439), the old one, chip label reads "1YN ES1.4": ``` /sys/.../mmc_host/mmc0/mmc0:0001/# cat vendor device 0x02d0 0xa9a6 ``` Reviewed-by: Hans de Goede <[email protected]> Cc: [email protected] Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: fix crash due to null pointer of sta in AP modePing-Ke Shih1-1/+1
In AP mode, 'sta' could be NULL if sending broadcast/multicast packets, so we should check before accessing, or it causes crash: BUG: kernel NULL pointer dereference, address: 0000000000000004 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 92 Comm: kworker/u33:0 Tainted: G OE Workqueue: rtw89_tx_wq rtw89_core_txq_work [rtw89_core] RIP: 0010:rtw89_core_tx_update_desc_info+0x2cc/0x7d0 [rtw89_core] Code: e2 01 41 be 04 00 00 00 41 8b 84 c4 0c 01 00 00 75 0d 45 31 f6 ... RSP: 0018:ffffb4cf807afce0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffffb4cf807afd48 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: ffffb4cf807afd30 R08: ffff9b28c1e59808 R09: ffff9b28c0297100 R10: 00000000052cf7c4 R11: 00000000052cf7c4 R12: ffff9b28c1602040 R13: ffff9b28c07b3000 R14: 0000000000000004 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9b2a73280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000001ca410003 CR4: 00000000000606e0 Call Trace: <TASK> rtw89_core_tx_write+0x7c/0x100 [rtw89_core] rtw89_core_txq_work+0x1b4/0x530 [rtw89_core] process_one_work+0x222/0x3f0 worker_thread+0x50/0x3f0 kthread+0x16b/0x190 ? rescuer_thread+0x3a0/0x3a0 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Fixes: e5307c9cd7ee ("wifi: rtw89: set data lowest rate according to AP supported rate") Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: correct 5 MHz mask settingEric Huang2-8/+10
Use primary channel index to determine which 5 MHz mask should be enable. This mask is used to prevent noise from channel edge to effect CCA threshold in wide bandwidth (>= 40 MHZ). Fixes: 1b00e9236a71 ("rtw89: 8852c: add set channel of BB part") Fixes: 6b0698984eb0 ("wifi: rtw89: 8852b: add chip_ops::set_channel") Cc: [email protected] Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: 8851b: add tables for RFKPing-Ke Shih2-0/+572
These tables are used by RF calibrations to assist to configure PHY and RF registers. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: 8851b: add BB and RF tables (2 of 2)Ping-Ke Shih1-0/+8058
These tables contain BB and RF parameters that driver will load them into registers. It also contains TX power according to country, band, rate and so on. Increasing thermal can cause TX power degraded, so power tracking tables are defined to compensate TX power. Internal version of these tables: - HALBB_029_106_15 (V17) - HALRF_029_00_089 * Radio A 0x22 * NCTL 0x5 Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: 8851b: add BB and RF tables (1 of 2)Ping-Ke Shih2-0/+6787
These tables contain BB and RF parameters that driver will load them into registers. It also contains TX power according to country, band, rate and so on. Increasing thermal can cause TX power degraded, so power tracking tables are defined to compensate TX power. Internal version of these tables: - HALBB_029_106_15 (V17) - HALRF_029_00_089 * Radio A 0x22 * NCTL 0x5 Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: pci: update PCI related settings to support 8851BPing-Ke Shih1-12/+21
Many settings of 8851B are like 8852A or 8852B. Change them to proper settings as hardware design. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: mac: update MAC settings to support 8851bPing-Ke Shih2-13/+33
Many settings of 8851B are the same as 8852B or 8852A, like DLE (Data link engine), security engine and so on. Update them according to hardware design. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: 8851b: fix TX path to path A for one RF path chipPing-Ke Shih1-2/+11
For two RF paths chips, we normally set path B as main path by default. 8851B has single one RF path, so set TX path to A and set mapping of path B to 0. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: read version of analog hardwarePing-Ke Shih3-0/+13
The chip contains digital and analog parts, and each of them has its own version number. This is used by BT coexistence mechanism to make strategy decision for different analog version. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: use hardware CFO to improve performanceEric Huang5-11/+29
Turn on hardware CFO (central frequency offset) compensation based on IC capability, and improve digital CFO compensation accuracy by using more fixed points number. Signed-off-by: Eric Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: support parameter tables by RFE typeZong-Zhe Yang12-90/+161
One chip can have different RFE (RF front end) types which we will judge at runtime. And, different RFE types may use different RF parameter tables. Though we didn't really meet this case previously, we are going to meet it on upcoming chip RTL8851B. So, this commit handles parameter tables for runtime RFE type. We now encapsulate rtw89_txpwr_rule_<2/5/6>ghz tables into rtw89_rfe_parms. Then, each chip defines its default parameter tables, and if needed, it can configure extra parameter tables by RFE type. Finally we determine runtime parameter tables by RFE type if one is configured. Otherwise, we use the default parameter tables. For now, we just move all settings under default parameter tables. We will configure parameter tables by RFE types in separate commits afterwards. Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: add firmware format version to backward compatible with older ↵Ping-Ke Shih7-17/+66
drivers In the discuss threads [1] [2], new firmware format break user space because older drivers can't recognize new firmware format. To avoid this, the new format will be named rtw89/rtw8852b_fw-1.bin and only new driver try to load it. Old drivers only load original and understandable firmware rtw89/rtw8852b_fw.bin. More, new driver will be still backward compatible with old firmware, so original firmware can be used by new driver. If there is newer firmware format is introduced, rtw89/rtw8852b_fw-2.bin will be given. The same rules will be applied like above. So, we will have firmware like below in linux-firmware in the future. rtw89/rtw8852b_fw-2.bin rtw89/rtw8852b_fw-1.bin rtw89/rtw8852b_fw.bin After this patch, MODULE_FIRMWARE() of 8852A/B/C become rtw89/rtw8852a_fw.bin rtw89/rtw8852b_fw-1.bin rtw89/rtw8852c_fw.bin [1] https://lore.kernel.org/linux-wireless/[email protected]/T/#m24cb43be31a762d0ea70bf07f27ae96c59f6931b [2] https://bugzilla.kernel.org/show_bug.cgi?id=217207 Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: use schedule_work to request firmwarePing-Ke Shih4-50/+45
Since we are going to load more than one firmware and some are not presented or optional, using asynchronous API request_firmware_nowait() will become complicated. Also, we want to use firmware_request_nowarn() to avoid warning messages when loading optional files. So, use schedule_work to be simpler. To abstract loading a firmware or file, define a struct rtw89_fw_req_info containing a struct firmware and a completion to ensure this firmware is loaded completely. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: fw: use generic flow to set/check featuresZong-Zhe Yang3-26/+25
In early feature bitmap obtained from rtw89_early_fw_feature_recognize(), the bits needed to check get increased. It's more friendly to work with RTW89_CHK_FW_FEATURE(). So, we concentrate the flow of iterating FW feature configures and calling RTW89_SET_FW_FEATURE() for various uses. And then, we adjust rtw89_early_fw_feature_recognize() for RTW89_CHK_FW_FEATURE(). Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: fix authentication fail during scanPo-Hao Huang1-6/+9
We used to store operating channel info after associated. However, scan might happen before that. Without switching back to operating channel, authentication or association might fail. Therefore, we switch back to operating channel when the scanning vif's BSSID is non-zero, which implies connected or during attempt to connect. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: add flag check for power statePo-Hao Huang2-4/+9
Use POWER_ON flag to make sure power on/off is symmetric. Since both remain_on_channel and hw_scan both alter the power state, this makes sure that we don't enter/leave IPS mode twice. Also, replace IPS related functions with inline function that does similar logic so we can track it more easily. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: add ieee80211::remain_on_channel opsPo-Hao Huang7-3/+378
Add support of remain on channel ops. Since channel context is required to enable multi-channel concurrent(MCC) and the current ROC in mac80211 don't support more than 1 channel context, add this to let P2P and other protocols relying on this work as expected. The off-channel duration and cancel timing is purely controlled by upper layers. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: add function to wait for completion of TX skbsPo-Hao Huang4-2/+78
Allocate a per-skb completion to track those skbs we are interested in and wait for them to complete transmission with TX status. Normally, the completion object is freed by wait side, but it could be timeout result that complete side should free the object instead. Add a owner field with RCU to determine which side should free the object. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Zong-Zhe Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: rtw89: 8852c: add beacon filter and CQM supportPo-Hao Huang7-1/+243
Adding this supports beacon filter and connection quality monitor. To make host CPU wake up less, let firmware perform signal monitoring and beacon processing, then notify driver upon signal changes or beacon loss. This feature needs firmware 0.27.56 or newer to support it. Signed-off-by: Po-Hao Huang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-14wifi: iwlwifi: mvm: tx: remove misleading if statementJohannes Berg1-2/+1
The if statement here is misleading, we return zero anyway since we just checked the 'ret' variable, simplify the code to remove the condition entirely. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.57c1eb58e655.I1b47a7771cd66306931089c150c6b5b240bdcba5@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: mvm: Fix setting the rate for non station casesIlan Peer3-17/+22
The setting of the rate used for non station cases did not take into consideration the interface type etc., thus when probe responses are transmitted on P2P Device interface etc. CCK rates were used which is not allowed. Modify the code so the non station case would consider the interface type etc. For HWs/FWs that do not support rate control, preserve the previous behavior, i.e., take the rate from the skb metadata and adjust as needed. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.fa0e4d42205d.Iab4784560c77b965fec070d4d0a1ec84171d94ff@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: mvm: validate station properly in flushJohannes Berg1-1/+8
If we have MLO, then the deflink.ap_sta_id cannot be used. However, we can use the new mvmvif->ap_sta pointer for the validation instead. Also don't do it multiple times for different FW instances of the same AP STA (TDLS STAs are only on a single link). Note that this isn't really working right yet since the underlying flush code hasn't been updated yet to know of multiple link STAs. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.7d747df44d65.Ie5392859fab4cfb73c20b49bfee2caadef5fd8ec@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: mvm: set STA mask for keys in MLOJohannes Berg1-9/+60
Implement the full STA mask and selecting the correct link for key installation. While at it, catch errors if this function returns a bad zero station mask, rather than waiting for the firmware to crash on it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.cedae2f21829.Iae07b736c3109d085ad5b74ec8282ce45020da39@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: mvm: fix ptk_pn memory leakJohannes Berg1-1/+5
If adding a key to firmware fails we leak the allocated ptk_pn. This shouldn't happen in practice, but we should still fix it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.99446ffd02bc.I82a2ad6ec1395f188e0a1677cc619e3fcb1feac9@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: mvm: make iwl_mvm_mac_ctxt_send_beacon() staticJohannes Berg2-8/+4
We never needed this to be non-static, that was just an artifact of the development process. Make it static. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.3c018c15f948.I87fd1aee288f33312a7206492608002d4e8e213e@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: mvm: track AP STA pointer and use it for MFPJohannes Berg3-10/+13
Instead of relying on the AP STA ID and dereferencing our firmware -> mac80211 STA array when we really only need the STA, not the per-link information (and might not have it, e.g. for a pairwise key installation where this is relevant), keep track of the AP STA as a pointer to the mac80211 STA, protected by the mutex. Then use it here in the key code instead. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.7db01b1508de.I88e6d252cdb0a6e4581d7c5fd7cbc037b4fd40ae@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_bufHyunwoo Kim1-1/+1
An integer overflow occurs in the iwl_write_to_user_buf() function, which is called by the iwl_dbgfs_monitor_data_read() function. static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count, void *buf, ssize_t *size, ssize_t *bytes_copied) { int buf_size_left = count - *bytes_copied; buf_size_left = buf_size_left - (buf_size_left % sizeof(u32)); if (*size > buf_size_left) *size = buf_size_left; If the user passes a SIZE_MAX value to the "ssize_t count" parameter, the ssize_t count parameter is assigned to "int buf_size_left". Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a negative number, so "*size" is assigned "buf_size_left" and goes into the third argument of the copy_to_user function, causing a heap overflow. This is not a security vulnerability because iwl_dbgfs_monitor_data_read() is a debugfs operation with 0400 privileges. Signed-off-by: Hyunwoo Kim <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.2d80ace81532.Iecfba549e0e0be21bbb0324675392e42e75bd5ad@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: fw: move memset before early returnTom Rix1-2/+2
Clang static analysis reports this representative issue dbg.c:1455:6: warning: Branch condition evaluates to a garbage value if (!rxf_data.size) ^~~~~~~~~~~~~~ This check depends on iwl_ini_get_rxf_data() to clear rxf_data but the function can return early without doing the clear. So move the memset before the early return. Fixes: cc9b6012d34b ("iwlwifi: yoyo: use hweight_long instead of bit manipulating") Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.872a7175f1ff.I33802a77a91998276992b088fbe25f61c87c33ac@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: mvm: initialize seq variableTom Rix1-0/+1
Clang static analysis reports this issue d3.c:567:22: warning: The left operand of '>' is a garbage value if (seq.tkip.iv32 > cur_rx_iv32) ~~~~~~~~~~~~~ ^ seq is never initialized. Call ieee80211_get_key_rx_seq() to initialize seq. Fixes: 0419e5e672d6 ("iwlwifi: mvm: d3: separate TKIP data from key iteration") Signed-off-by: Tom Rix <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.6dd372f84f93.If1f708c90e6424a935b4eba3917dfb7582e0dd0a@changeid Signed-off-by: Johannes Berg <[email protected]>
2023-04-14wifi: iwlwifi: mvm: Fix spelling mistake "Gerenal" -> "General"Colin Ian King1-1/+1
There is a spelling mistake in a IWL_DEBUG_SCAN debug message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Gregory Greenman <[email protected]> Link: https://lore.kernel.org/r/20230414130637.eac55cbef8f1.I15cc5d3f1489759bf915bfb3cbbb72b67b18f8b6@changeid Signed-off-by: Johannes Berg <[email protected]>