aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-07-01net: remove the caif_hsi driverChristoph Hellwig3-1466/+0
The caif_hsi driver relies on a cfhsi_get_ops symbol using symbol_get, but this symbol is not provided anywhere in the kernel tree. Remove this driver given that it is dead code. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01ibmvnic: retry reset if there are no other resetsSukadev Bhattiprolu1-3/+19
Normally, if a reset fails due to failover or other communication error there is another reset (eg: FAILOVER) in the queue and we would process that reset. But if we are unable to communicate with PHYP or VIOS after H_FREE_CRQ, there would be no other resets in the queue and the adapter would be in an undefined state even though it was in the OPEN state earlier. While starting the reset we set the carrier to off state so we won't even get the timeout resets. If the last queued reset fails, retry it as a hard reset (after the usual 60 second settling time). Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: wwan: iosm: set default mtuM Chetan Kumar1-0/+1
Set netdev default mtu size to 1500. Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: wwan: iosm: fix netdev tx statsM Chetan Kumar1-1/+5
Update tx stats on successful packet consume, drop. Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: wwan: iosm: correct link-id handlingM Chetan Kumar4-9/+9
Link ID to be kept intact with MBIM session ID Ex: ID 0 should be associated to MBIM session ID 0. Reported-by: Loic Poulain <[email protected]> Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: wwan: iosm: remove reduandant checkM Chetan Kumar1-16/+3
Remove reduandant IP session id check since required checks are in place under caller. Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: wwan: iosm: fix uevent reportingM Chetan Kumar1-1/+1
Change uevent env variable name to IOSM_EVENT & correct reporting format to key=value pair. Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01octeontx2-pf: offload DMAC filters to CGX/RPM blockHariprasad Kelam6-10/+417
DMAC filtering can be achieved by either NPC MCAM rules or CGX/RPM MAC filters. Currently we are achieving this by NPC MCAM rules. This patch offloads DMAC filters to CGX/RPM MAC filters instead of NPC MCAM rules. Offloading DMAC filter to CGX/RPM block helps in reducing traffic to NPC block and save MCAM rules Signed-off-by: Hariprasad Kelam <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01octeontx2-af: Debugfs support for DMAC filtersHariprasad Kelam5-9/+113
Add debugfs support to display CGX/RPM DMAC filter table associated with pf. cat /sys/kernel/debug/octeontx2/cgx/cgx0/lmac0/mac_filter PCI dev RVUPF BROADCAST MULTICAST FILTER-MODE 0002:02:00.0 PF2 ACCEPT ACCEPT UNICAST DMAC-INDEX ADDRESS 0 00:0f:b7:06:17:06 1 1a:1b:1c:1d:1e:01 2 1a:1b:1c:1d:1e:02 Signed-off-by: Hariprasad Kelam <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01octeontx2-af: DMAC filter support in MAC blockSunil Kumar Kori7-20/+425
MAC block supports 32 dmac filters which are logically divided among all attached LMACS. For example MAC block0 having one LMAC then maximum supported filters are 32 where as MAC block1 having 4 enabled LMACS them maximum supported filteres are 8 for each LMAC. This patch adds mbox handlers to add/delete/update mac entry in DMAC filter table. Signed-off-by: Sunil Kumar Kori <[email protected]> Signed-off-by: Hariprasad Kelam <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01Merge branch 'master' of ../net-next/David S. Miller14-79/+304
2021-07-01net: dsa: mv88e6xxx: enable SerDes PCS register dump via ethtool -d on TopazMarek Behún1-0/+4
Commit bf3504cea7d7e ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d") added support for dumping SerDes PCS registers via ethtool -d for Peridot. The same implementation is also valid for Topaz, but was not enabled at the time. Signed-off-by: Marek Behún <[email protected]> Fixes: bf3504cea7d7e ("net: dsa: mv88e6xxx: Add 6390 family PCS registers to ethtool -d") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: dsa: mv88e6xxx: enable SerDes RX stats for TopazMarek Behún2-3/+9
Commit 0df952873636a ("mv88e6xxx: Add serdes Rx statistics") added support for RX statistics on SerDes ports for Peridot. This same implementation is also valid for Topaz, but was not enabled at the time. We need to use the generic .serdes_get_lane() method instead of the Peridot specific one in the stats methods so that on Topaz the proper one is used. Signed-off-by: Marek Behún <[email protected]> Fixes: 0df952873636a ("mv88e6xxx: Add serdes Rx statistics") Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: dsa: mv88e6xxx: enable devlink ATU hash param for TopazMarek Behún1-0/+4
Commit 23e8b470c7788 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.") introduced ATU hash algorithm access via devlink, but did not enable it for Topaz. Enable this feature also for Topaz. Signed-off-by: Marek Behún <[email protected]> Fixes: 23e8b470c7788 ("net: dsa: mv88e6xxx: Add devlink param for ATU hash algorithm.") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: dsa: mv88e6xxx: enable .rmu_disable() on TopazMarek Behún1-0/+2
Commit 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op") introduced .rmu_disable() method with implementation for several models, but forgot to add Topaz, which can use the Peridot implementation. Use the Peridot implementation of .rmu_disable() on Topaz. Signed-off-by: Marek Behún <[email protected]> Fixes: 9e5baf9b36367 ("net: dsa: mv88e6xxx: add RMU disable op") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: dsa: mv88e6xxx: use correct .stats_set_histogram() on TopazMarek Behún1-2/+2
Commit 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") introduced wrong .stats_set_histogram() method for Topaz family. The Peridot method should be used instead. Signed-off-by: Marek Behún <[email protected]> Fixes: 40cff8fca9e3 ("net: dsa: mv88e6xxx: Fix stats histogram mode") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: dsa: mv88e6xxx: enable .port_set_policy() on TopazMarek Behún1-0/+2
Commit f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy") introduced .port_set_policy() method with implementation for several models, but forgot to add Topaz, which can use the 6352 implementation. Use the 6352 implementation of .port_set_policy() on Topaz. Signed-off-by: Marek Behún <[email protected]> Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clearDoug Berger2-21/+2
Setting the EXT_ENERGY_DET_MASK bit allows the port energy detection logic of the internal PHY to prevent the system from sleeping. Some internal PHYs will report that energy is detected when the network interface is closed which can prevent the system from going to sleep if WoL is enabled when the interface is brought down. Since the driver does not support waking the system on this logic, this commit clears the bit whenever the internal PHY is powered up and the other logic for manipulating the bit is removed since it serves no useful function. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01octeontx2-pf: cn10k: Use runtime allocated LMTLINE regionGeetha sowjanya6-73/+54
The current driver uses static LMTST region allocated by firmware. This memory gets populated as PF/VF BAR2. RVU PF/VF driver ioremap the memory as device memory for NIX/NPA operation. Since the memory is mapped as device memory we see performance degration. To address this issue this patch implements runtime memory allocation. RVU PF/VF allocates memory during device probe and share the base address with RVU AF. RVU AF then configure the LMT MAP table accordingly. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01octeontx2-af: cn10k: Support configurable LMTST regionsGeetha sowjanya3-35/+103
This patch extends the lmtst_tbl_setup_req mbox to support run time LMTST configuration. RVU PF/VF and DPDK/ODP allocates a LMT region, creates a translation entry for a device via VFIO IOCTLs. This IOVA is shared with AF through above mbox. AF then uses RVU_SMMU transulation Widget and gets PA for the IOVA and updates the LMTtable entry for that device. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01octeontx2-af: cn10k: Setting up lmtst map tableHarman Kalra6-1/+159
Introducing a new mailbox to support updating lmt entries and common lmt base address scheme i.e. multiple pcifuncs can share lmt region to reduce L1 cache pressure for application. Parameters passed to mailbox includes the primary pcifunc value whose lmt regions will be shared by other secondary pcifuncs. Here secondary pcifunc will be the one who is calling the mailbox. For example: By default each pcifunc has its own LMT base address: PCIFUNC1 LMT_BASE_ADDR A PCIFUNC2 LMT_BASE_ADDR B PCIFUNC3 LMT_BASE_ADDR C PCIFUNC4 LMT_BASE_ADDR D Application will choose PCIFUNC1 as base/primary pcifunc and as and when other pcifunc(secondary pcifuncs) gets probed, this mailbox will be called and LMTST table will be updated as: PCIFUNC1 LMT_BASE_ADDR A PCIFUNC2 LMT_BASE_ADDR A PCIFUNC3 LMT_BASE_ADDR A PCIFUNC4 LMT_BASE_ADDR A On FLR lmtst map table gets resetted to the default lmt base addresses for all secondary pcifuncs. Signed-off-by: Harman Kalra <[email protected]> Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01net: usb: asix: ax88772: suspend PHY on driver probeOleksij Rempel1-0/+1
After probe/bind sequence is the PHY in active state, even if interface is stopped. As result, on some systems like Samsung Exynos5250 SoC based Arndale board, the ASIX PHY will be able to negotiate the link but fail to transmit the data. To handle it, suspend the PHY on probe. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Signed-off-by: Oleksij Rempel <[email protected]> Reported-by: Marek Szyprowski <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-07-01kernel.h: split out panic and oops helpersAndy Shevchenko1-0/+1
kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out panic and oops helpers. There are several purposes of doing this: - dropping dependency in bug.h - dropping a loop by moving out panic_notifier.h - unload kernel.h from something which has its own domain At the same time convert users tree-wide to use new headers, although for the time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [[email protected]: thread_info.h needs limits.h] [[email protected]: ia64 fix] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Co-developed-by: Andrew Morton <[email protected]> Acked-by: Mike Rapoport <[email protected]> Acked-by: Corey Minyard <[email protected]> Acked-by: Christian Brauner <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Acked-by: Kees Cook <[email protected]> Acked-by: Wei Liu <[email protected]> Acked-by: Rasmus Villemoes <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Acked-by: Luis Chamberlain <[email protected]> Acked-by: Stephen Boyd <[email protected]> Acked-by: Thomas Bogendoerfer <[email protected]> Acked-by: Helge Deller <[email protected]> # parisc Signed-off-by: Linus Torvalds <[email protected]>
2021-07-01igb: Fix position of assignment to *ringJedrzej Jagielski1-1/+2
Assignment to *ring should be done after correctness check of the argument queue. Fixes: 91db364236c8 ("igb: Refactor igb_configure_cbs()") Signed-off-by: Jedrzej Jagielski <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01igb: Check if num of q_vectors is smaller than max before array accessAleksandr Loktionov1-1/+8
Ensure that the adapter->q_vector[MAX_Q_VECTORS] array isn't accessed beyond its size. It was fixed by using a local variable num_q_vectors as a limit for loop index, and ensure that num_q_vectors is not bigger than MAX_Q_VECTORS. Fixes: 047e0030f1e6 ("igb: add new data structure for handling interrupts and NAPI") Signed-off-by: Aleksandr Loktionov <[email protected]> Reviewed-by: Grzegorz Siwik <[email protected]> Reviewed-by: Arkadiusz Kubalewski <[email protected]> Reviewed-by: Slawomir Laba <[email protected]> Reviewed-by: Sylwester Dziedziuch <[email protected]> Reviewed-by: Mateusz Palczewski <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01iavf: Fix an error handling path in 'iavf_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01e1000e: Fix an error handling path in 'e1000_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 111b9dc5c981 ("e1000e: add aer support") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Sasha Neftin <[email protected]> Tested-by: Dvora Fuxbrumer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01fm10k: Fix an error handling path in 'fm10k_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 19ae1b3fb99c ("fm10k: Add support for PCI power management and error handling") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01igb: Fix an error handling path in 'igb_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 40a914fa72ab ("igb: Add support for pci-e Advanced Error Reporting") Signed-off-by: Christophe JAILLET <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01igc: Fix an error handling path in 'igc_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: c9a11c23ceb6 ("igc: Add netdev") Signed-off-by: Christophe JAILLET <[email protected]> Tested-by: Dvora Fuxbrumer <[email protected]> Acked-by: Sasha Neftin <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01ixgbe: Fix an error handling path in 'ixgbe_probe()'Christophe JAILLET1-0/+1
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 6fabd715e6d8 ("ixgbe: Implement PCIe AER support") Signed-off-by: Christophe JAILLET <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01igc: change default return of igc_read_phy_reg()Tom Rix1-1/+1
Static analysis reports this problem igc_main.c:4944:20: warning: The left operand of '&' is a garbage value if (!(phy_data & SR_1000T_REMOTE_RX_STATUS) && ~~~~~~~~ ^ phy_data is set by the call to igc_read_phy_reg() only if there is a read_reg() op, else it is unset and a 0 is returned. Change the return to -EOPNOTSUPP. Fixes: 208983f099d9 ("igc: Add watchdog") Signed-off-by: Tom Rix <[email protected]> Tested-by: Dvora Fuxbrumer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01igb: Fix use-after-free error during resetVinicius Costa Gomes1-0/+2
Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igb_poll() runs while the controller is reset this can lead to the driver try to free a skb that was already freed. (The crash is harder to reproduce with the igb driver, but the same potential problem exists as the code is identical to igc) Fixes: 7cc6fd4c60f2 ("igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ring") Signed-off-by: Vinicius Costa Gomes <[email protected]> Reported-by: Erez Geva <[email protected]> Tested-by: Tony Brelinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-07-01igc: Fix use-after-free error during resetVinicius Costa Gomes1-0/+2
Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igc_poll() runs while the controller is being reset this can lead to the driver try to free a skb that was already freed. Log message: [ 101.525242] refcount_t: underflow; use-after-free. [ 101.525251] WARNING: CPU: 1 PID: 646 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0 [ 101.525259] Modules linked in: sch_etf(E) sch_mqprio(E) rfkill(E) intel_rapl_msr(E) intel_rapl_common(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) binfmt_misc(E) kvm_intel(E) kvm(E) irqbypass(E) crc32_pclmul(E) ghash_clmulni_intel(E) aesni_intel(E) mei_wdt(E) libaes(E) crypto_simd(E) cryptd(E) glue_helper(E) snd_hda_codec_hdmi(E) rapl(E) intel_cstate(E) snd_hda_intel(E) snd_intel_dspcfg(E) sg(E) soundwire_intel(E) intel_uncore(E) at24(E) soundwire_generic_allocation(E) iTCO_wdt(E) soundwire_cadence(E) intel_pmc_bxt(E) serio_raw(E) snd_hda_codec(E) iTCO_vendor_support(E) watchdog(E) snd_hda_core(E) snd_hwdep(E) snd_soc_core(E) snd_compress(E) snd_pcsp(E) soundwire_bus(E) snd_pcm(E) evdev(E) snd_timer(E) mei_me(E) snd(E) soundcore(E) mei(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) t10_pi(E) crc_t10dif(E) crct10dif_generic(E) i915(E) ahci(E) libahci(E) ehci_pci(E) igb(E) xhci_pci(E) ehci_hcd(E) [ 101.525303] drm_kms_helper(E) dca(E) xhci_hcd(E) libata(E) crct10dif_pclmul(E) cec(E) crct10dif_common(E) tsn(E) igc(E) e1000e(E) ptp(E) i2c_i801(E) crc32c_intel(E) psmouse(E) i2c_algo_bit(E) i2c_smbus(E) scsi_mod(E) lpc_ich(E) pps_core(E) usbcore(E) drm(E) button(E) video(E) [ 101.525318] CPU: 1 PID: 646 Comm: irq/37-enp7s0-T Tainted: G E 5.10.30-rt37-tsn1-rt-ipipe #ipipe [ 101.525320] Hardware name: SIEMENS AG SIMATIC IPC427D/A5E31233588, BIOS V17.02.09 03/31/2017 [ 101.525322] RIP: 0010:refcount_warn_saturate+0xab/0xf0 [ 101.525325] Code: 05 31 48 44 01 01 e8 f0 c6 42 00 0f 0b c3 80 3d 1f 48 44 01 00 75 90 48 c7 c7 78 a8 f3 a6 c6 05 0f 48 44 01 01 e8 d1 c6 42 00 <0f> 0b c3 80 3d fe 47 44 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 a8 f3 [ 101.525327] RSP: 0018:ffffbdedc0917cb8 EFLAGS: 00010286 [ 101.525329] RAX: 0000000000000000 RBX: ffff98fd6becbf40 RCX: 0000000000000001 [ 101.525330] RDX: 0000000000000001 RSI: ffffffffa6f2700c RDI: 00000000ffffffff [ 101.525332] RBP: ffff98fd6becc14c R08: ffffffffa7463d00 R09: ffffbdedc0917c50 [ 101.525333] R10: ffffffffa74c3578 R11: 0000000000000034 R12: 00000000ffffff00 [ 101.525335] R13: ffff98fd6b0b1000 R14: 0000000000000039 R15: ffff98fd6be35c40 [ 101.525337] FS: 0000000000000000(0000) GS:ffff98fd6e240000(0000) knlGS:0000000000000000 [ 101.525339] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.525341] CR2: 00007f34135a3a70 CR3: 0000000150210003 CR4: 00000000001706e0 [ 101.525343] Call Trace: [ 101.525346] sock_wfree+0x9c/0xa0 [ 101.525353] unix_destruct_scm+0x7b/0xa0 [ 101.525358] skb_release_head_state+0x40/0x90 [ 101.525362] skb_release_all+0xe/0x30 [ 101.525364] napi_consume_skb+0x57/0x160 [ 101.525367] igc_poll+0xb7/0xc80 [igc] [ 101.525376] ? sched_clock+0x5/0x10 [ 101.525381] ? sched_clock_cpu+0xe/0x100 [ 101.525385] net_rx_action+0x14c/0x410 [ 101.525388] __do_softirq+0xe9/0x2f4 [ 101.525391] __local_bh_enable_ip+0xe3/0x110 [ 101.525395] ? irq_finalize_oneshot.part.47+0xe0/0xe0 [ 101.525398] irq_forced_thread_fn+0x6a/0x80 [ 101.525401] irq_thread+0xe8/0x180 [ 101.525403] ? wake_threads_waitq+0x30/0x30 [ 101.525406] ? irq_thread_check_affinity+0xd0/0xd0 [ 101.525408] kthread+0x183/0x1a0 [ 101.525412] ? kthread_park+0x80/0x80 [ 101.525415] ret_from_fork+0x22/0x30 Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Reported-by: Erez Geva <[email protected]> Signed-off-by: Vinicius Costa Gomes <[email protected]> Tested-by: Dvora Fuxbrumer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-06-30Merge tag 'net-next-5.14' of ↵Linus Torvalds1006-18132/+78532
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - BPF: - add syscall program type and libbpf support for generating instructions and bindings for in-kernel BPF loaders (BPF loaders for BPF), this is a stepping stone for signed BPF programs - infrastructure to migrate TCP child sockets from one listener to another in the same reuseport group/map to improve flexibility of service hand-off/restart - add broadcast support to XDP redirect - allow bypass of the lockless qdisc to improving performance (for pktgen: +23% with one thread, +44% with 2 threads) - add a simpler version of "DO_ONCE()" which does not require jump labels, intended for slow-path usage - virtio/vsock: introduce SOCK_SEQPACKET support - add getsocketopt to retrieve netns cookie - ip: treat lowest address of a IPv4 subnet as ordinary unicast address allowing reclaiming of precious IPv4 addresses - ipv6: use prandom_u32() for ID generation - ip: add support for more flexible field selection for hashing across multi-path routes (w/ offload to mlxsw) - icmp: add support for extended RFC 8335 PROBE (ping) - seg6: add support for SRv6 End.DT46 behavior - mptcp: - DSS checksum support (RFC 8684) to detect middlebox meddling - support Connection-time 'C' flag - time stamping support - sctp: packetization Layer Path MTU Discovery (RFC 8899) - xfrm: speed up state addition with seq set - WiFi: - hidden AP discovery on 6 GHz and other HE 6 GHz improvements - aggregation handling improvements for some drivers - minstrel improvements for no-ack frames - deferred rate control for TXQs to improve reaction times - switch from round robin to virtual time-based airtime scheduler - add trace points: - tcp checksum errors - openvswitch - action execution, upcalls - socket errors via sk_error_report Device APIs: - devlink: add rate API for hierarchical control of max egress rate of virtual devices (VFs, SFs etc.) - don't require RCU read lock to be held around BPF hooks in NAPI context - page_pool: generic buffer recycling New hardware/drivers: - mobile: - iosm: PCIe Driver for Intel M.2 Modem - support for Qualcomm MSM8998 (ipa) - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU) - NXP SJA1110 Automotive Ethernet 10-port switch - Qualcomm QCA8327 switch support (qca8k) - Mikrotik 10/25G NIC (atl1c) Driver changes: - ACPI support for some MDIO, MAC and PHY devices from Marvell and NXP (our first foray into MAC/PHY description via ACPI) - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx - Mellanox/Nvidia NIC (mlx5) - NIC VF offload of L2 bridging - support IRQ distribution to Sub-functions - Marvell (prestera): - add flower and match all - devlink trap - link aggregation - Netronome (nfp): connection tracking offload - Intel 1GE (igc): add AF_XDP support - Marvell DPU (octeontx2): ingress ratelimit offload - Google vNIC (gve): new ring/descriptor format support - Qualcomm mobile (rmnet & ipa): inline checksum offload support - MediaTek WiFi (mt76) - mt7915 MSI support - mt7915 Tx status reporting - mt7915 thermal sensors support - mt7921 decapsulation offload - mt7921 enable runtime pm and deep sleep - Realtek WiFi (rtw88) - beacon filter support - Tx antenna path diversity support - firmware crash information via devcoredump - Qualcomm WiFi (wcn36xx) - Wake-on-WLAN support with magic packets and GTK rekeying - Micrel PHY (ksz886x/ksz8081): add cable test support" * tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits) tcp: change ICSK_CA_PRIV_SIZE definition tcp_yeah: check struct yeah size at compile time gve: DQO: Fix off by one in gve_rx_dqo() stmmac: intel: set PCI_D3hot in suspend stmmac: intel: Enable PHY WOL option in EHL net: stmmac: option to enable PHY WOL with PMT enabled net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del} net: use netdev_info in ndo_dflt_fdb_{add,del} ptp: Set lookup cookie when creating a PTP PPS source. net: sock: add trace for socket errors net: sock: introduce sk_error_report net: dsa: replay the local bridge FDB entries pointing to the bridge dev too net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev net: dsa: include fdb entries pointing to bridge in the host fdb list net: dsa: include bridge addresses which are local in the host fdb list net: dsa: sync static FDB entries on foreign interfaces to hardware net: dsa: install the host MDB and FDB entries in the master's RX filter net: dsa: reference count the FDB addresses at the cross-chip notifier level net: dsa: introduce a separate cross-chip notifier type for host FDBs net: dsa: reference count the MDB entries at the cross-chip notifier level ...
2021-06-30treewide: Add missing semicolons to __assign_str usesJoe Perches2-8/+8
The __assign_str macro has an unusual ending semicolon but the vast majority of uses of the macro already have semicolon termination. $ git grep -P '\b__assign_str\b' | wc -l 551 $ git grep -P '\b__assign_str\b.*;' | wc -l 480 Add semicolons to the __assign_str() uses without semicolon termination and all the other uses without semicolon termination via additional defines that are equivalent to __assign_str() with the eventual goal of removing the semicolon from the __assign_str() macro definition. Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski30-112/+246
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <[email protected]>
2021-06-29gve: DQO: Fix off by one in gve_rx_dqo()Dan Carpenter1-1/+1
The rx->dqo.buf_states[] array is allocated in gve_rx_alloc_ring_dqo() and it has rx->dqo.num_buf_states so this > needs to >= to prevent an out of bounds access. Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29stmmac: intel: set PCI_D3hot in suspendVoon Weifeng1-0/+1
During suspend, set the Intel mgbe to D3hot state to save power consumption. Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: Ling Pei Lee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29stmmac: intel: Enable PHY WOL option in EHLLing Pei Lee1-0/+1
Enable PHY Wake On LAN in Intel EHL Intel platform. PHY Wake on LAN option is enabled due to Intel EHL Intel platform is designed for PHY Wake On LAN but not MAC Wake On LAN. Signed-off-by: Ling Pei Lee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29net: stmmac: option to enable PHY WOL with PMT enabledLing Pei Lee1-1/+2
The current stmmac driver WOL implementation will enable MAC WOL if MAC HW PMT feature is on. Else, the driver will check for PHY WOL support. There is another case where MAC HW PMT is enabled but the platform still goes for the PHY WOL option. E.g, Intel platform are designed for PHY WOL but not MAC WOL although HW MAC PMT features are enabled. Introduce use_phy_wol platform data to select PHY WOL instead of depending on HW PMT features. Set use_phy_wol will disable the plat->pmt which currently used to determine the system to wake up by MAC WOL or PHY WOL. Signed-off-by: Ling Pei Lee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29net: sock: introduce sk_error_reportAlexander Aring1-1/+1
This patch introduces a function wrapper to call the sk_error_report callback. That will prepare to add additional handling whenever sk_error_report is called, for example to trace socket errors. Signed-off-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-29Merge tag 'hyperv-next-signed-20210629' of ↵Linus Torvalds3-3/+18
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: "Just a few minor enhancement patches and bug fixes" * tag 'hyperv-next-signed-20210629' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: PCI: hv: Add check for hyperv_initialized in init_hv_pci_drv() Drivers: hv: Move Hyper-V extended capability check to arch neutral code drivers: hv: Fix missing error code in vmbus_connect() x86/hyperv: fix logical processor creation hv_utils: Fix passing zero to 'PTR_ERR' warning scsi: storvsc: Use blk_mq_unique_tag() to generate requestIDs Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer hv_balloon: Remove redundant assignment to region_start
2021-06-29net/mlx4: Fix fall-through warning for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]>
2021-06-28Merge tag 'fallthrough-fixes-clang-5.14-rc1' of ↵Linus Torvalds6-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fallthrough fixes from Gustavo Silva: "Fix many fall-through warnings when building with Clang 12.0.0 and '-Wimplicit-fallthrough' so that we at some point will be able to enable that warning by default" * tag 'fallthrough-fixes-clang-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (26 commits) rxrpc: Fix fall-through warnings for Clang drm/nouveau/clk: Fix fall-through warnings for Clang drm/nouveau/therm: Fix fall-through warnings for Clang drm/nouveau: Fix fall-through warnings for Clang xfs: Fix fall-through warnings for Clang xfrm: Fix fall-through warnings for Clang tipc: Fix fall-through warnings for Clang sctp: Fix fall-through warnings for Clang rds: Fix fall-through warnings for Clang net/packet: Fix fall-through warnings for Clang net: netrom: Fix fall-through warnings for Clang ide: Fix fall-through warnings for Clang hwmon: (max6621) Fix fall-through warnings for Clang hwmon: (corsair-cpro) Fix fall-through warnings for Clang firewire: core: Fix fall-through warnings for Clang braille_console: Fix fall-through warnings for Clang ipv4: Fix fall-through warnings for Clang qlcnic: Fix fall-through warnings for Clang bnxt_en: Fix fall-through warnings for Clang netxen_nic: Fix fall-through warnings for Clang ...
2021-06-28net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()Nathan Chancellor1-4/+1
Clang warns: drivers/net/ethernet/microchip/sparx5/sparx5_main.c:760:29: warning: variable 'mac_addr' is uninitialized when used here [-Wuninitialized] if (of_get_mac_address(np, mac_addr)) { ^~~~~~~~ drivers/net/ethernet/microchip/sparx5/sparx5_main.c:669:14: note: initialize the variable 'mac_addr' to silence this warning u8 *mac_addr; ^ = NULL 1 warning generated. mac_addr is only used to store the value retrieved from of_get_mac_address(), which is then copied into the base_mac member of the sparx5 struct using ether_addr_copy(). It is easier to just use the base_mac address directly, which avoids the warning and the extra copy. Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1413 Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: dsa: sja1105: fix dynamic access to L2 Address Lookup table for SJA1110Vladimir Oltean1-4/+22
The SJA1105P/Q/R/S and SJA1110 may have the same layout for the command to read/write/search for L2 Address Lookup entries, but as explained in the comments at the beginning of the sja1105_dynamic_config.c file, the command portion of the buffer is at the end, and we need to obtain a pointer to it by adding the length of the entry to the buffer. Alas, the length of an L2 Address Lookup entry is larger in SJA1110 than it is for SJA1105P/Q/R/S, so we need to create a common helper to access the command buffer, and this receives as argument the length of the entry buffer. Fixes: 3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: phy: at803x: mask 1000 Base-X link modeDavid Bauer1-1/+29
AR8031/AR8033 have different status registers for copper and fiber operation. However, the extended status register is the same for both operation modes. As a result of that, ESTATUS_1000_XFULL is set to 1 even when operating in copper TP mode. Remove this mode from the supported link modes, as this driver currently only supports copper operation. Signed-off-by: David Bauer <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller23-90/+12
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-06-28 The following pull-request contains BPF updates for your *net-next* tree. We've added 37 non-merge commits during the last 12 day(s) which contain a total of 56 files changed, 394 insertions(+), 380 deletions(-). The main changes are: 1) XDP driver RCU cleanups, from Toke Høiland-Jørgensen and Paul E. McKenney. 2) Fix bpf_skb_change_proto() IPv4/v6 GSO handling, from Maciej Żenczykowski. 3) Fix false positive kmemleak report for BPF ringbuf alloc, from Rustam Kovhaev. 4) Fix x86 JIT's extable offset calculation for PROBE_LDX NULL, from Ravi Bangoria. 5) Enable libbpf fallback probing with tracing under RHEL7, from Jonathan Edwards. 6) Clean up x86 JIT to remove unused cnt tracking from EMIT macro, from Jiri Olsa. 7) Netlink cleanups for libbpf to please Coverity, from Kumar Kartikeya Dwivedi. 8) Allow to retrieve ancestor cgroup id in tracing programs, from Namhyung Kim. 9) Fix lirc BPF program query to use user-provided prog_cnt, from Sean Young. 10) Add initial libbpf doc including generated kdoc for its API, from Grant Seltzer. 11) Make xdp_rxq_info_unreg_mem_model() more robust, from Jakub Kicinski. 12) Fix up bpfilter startup log-level to info level, from Gary Lin. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-06-28net: sparx5: fix error return code in sparx5_register_notifier_blocks()Yang Yingliang1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: d6fce5141929 ("net: sparx5: add switching support") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.