aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-03-31r8169: use netif_receive_skb_list batchingHeiner Kallweit1-1/+4
Use netif_receive_skb_list() instead of napi_gro_receive() to benefit from batched skb processing. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-31mlxsw: spectrum_acl: Rename rehash_dis traceJiri Pirko1-2/+2
The name of the trace is no longer correct, since there is no disable of rehash done. So name it "rehash_rollback_failed". Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-31mlxsw: spectrum_acl: Remove failed_rollback dead endJiri Pirko1-10/+10
Currently if a rollback ends with error, the vregion is in a zombie state until end of the existence. Instead of that, rather try to continue where rollback ended later on (after rehash interval). Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-31mlxsw: spectrum_acl: Move rehash_dis trace call and err msg to vregion_migrate()Jiri Pirko1-6/+5
Move the call of rehash_dis trace and the error message to vregion_migrate() next to the failed_rollback flag set. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-31mlxsw: spectrum_acl: Remove redundant failed_rollback from migrate_start()Jiri Pirko1-4/+1
The flag is set by the caller mlxsw_sp_acl_tcam_vregion_migrate() anyway, so don't set it here. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-30r8169: disable default rx interrupt coalescing on RTL8168Heiner Kallweit1-1/+1
It was reported that re-introducing ASPM, in combination with RX interrupt coalescing, results in significantly increased packet latency, see [0]. Disabling ASPM or RX interrupt coalescing fixes the issue. Therefore change the driver's default to disable RX interrupt coalescing. Users still have the option to enable RX coalescing via ethtool. [0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=925496 Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Reported-by: Mike Crowe <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-30Merge tag 'iwlwifi-next-for-kalle-2019-03-22' of ↵Kalle Valo29-446/+807
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of patches intended for v5.2 * Send NO_DATA events so they can be captured in radiotap; * Some channel-switch changes; * Support for multiple BSSID; * Continued work and bugfixes for the new debugging infra; * Support for some new FW API versions; * Some work to support new hardware; * General bugfixes; * Other cleanups;
2019-03-30Merge tag 'iwlwifi-for-kalle-2019-03-22' of ↵Kalle Valo14-146/+54
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes First batch of iwlwifi fixes intended for v5.1 * add some new PCI IDs (plus a struct name change they depend on); * fix crypto with new devices, namely 22560 and above; * a bunch of fixes (and a dependency) for the new debugging infra;
2019-03-29Merge tag 'mlx5-fixes-2019-03-29' of ↵David S. Miller9-81/+152
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-03-29 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.11 ('net/mlx5: Decrease default mr cache size') For -stable v4.12 ('net/mlx5e: Add a lock on tir list') For -stable v4.13 ('net/mlx5e: Fix error handling when refreshing TIRs') For -stable v4.18 ('net/mlx5e: Update xon formula') For -stable v4.19 ('net: mlx5: Add a missing check on idr_find, free buf') ('net/mlx5e: Update xoff formula') net-next merge Note: When merged with net-next the following simple conflict will appear, drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c ++<<<<<<< HEAD (net) + * max_mtu: netdev's max_mtu ++======= + * @mtu: device's MTU ++>>>>>>> net-next To resolve: just replace the line in net-next * @mtu: device's MTU to * @max_mtu: netdev's max_mtu ==================== Signed-off-by: David S. Miller <[email protected]>
2019-03-29team: use netif_is_team_port()Julian Wiedmann1-4/+2
Replace the team_port_exists() macro with its twin from netdevice.h CC: Jiri Pirko <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29cxgb4/cxgb4vf: Display advertised FEC in ethtoolVishal Kulkarni5-65/+95
This patch advertises Forward Error Correction in ethtool Signed-off-by: Casey Leedom <[email protected]> Signed-off-by: Vishal Kulkarni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29cxgb4: Update 1.23.3.0 as the latest firmware supported.Vishal Kulkarni1-6/+6
Change t4fw_version.h to update latest firmware version number to 1.23.3.0. Signed-off-by: Vishal Kulkarni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29Revert "cxgb4: Update 1.23.3.0 as the latest firmware supported."David S. Miller1-6/+6
This reverts commit 4d31c4fa3f9ef7b7e2e79fd57d21290f64c938f5. Accidently applied this to the wrong tree. Signed-off-by: David S. Miller <[email protected]>
2019-03-29cxgb4: Update 1.23.3.0 as the latest firmware supported.Vishal Kulkarni1-6/+6
Change t4fw_version.h to update latest firmware version number to 1.23.3.0. Signed-off-by: Vishal Kulkarni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29hv_netvsc: Fix unwanted wakeup after tx_disableHaiyang Zhang3-8/+31
After queue stopped, the wakeup mechanism may wake it up again when ring buffer usage is lower than a threshold. This may cause send path panic on NULL pointer when we stopped all tx queues in netvsc_detach and start removing the netvsc device. This patch fix it by adding a tx_disable flag to prevent unwanted queue wakeup. Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic") Reported-by: Mohammed Gamal <[email protected]> Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29bonding: show full hw address in sysfs for slave entriesKonstantin Khorenko1-1/+3
Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example. # cat /sys/devices/<skipped>/net/ib0/address 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr 80:00:02:08:fe:80 So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well. Signed-off-by: Konstantin Khorenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29net/mlx5e: Consider tunnel type for encap contextsEli Britstein1-9/+19
The driver allocates an encap context based on the tunnel properties, and reuse that context for all flows using the same tunnel properties. Commit df2ef3bff193 ("net/mlx5e: Add GRE protocol offloading") introduced another tunnel protocol other than the single VXLAN previously supported. A flow that uses a tunnel with the same tunnel properties but with a different tunnel type (GRE vs VXLAN for example) would mistakenly reuse the previous alocated context, causing the traffic to be sent with the wrong encapsulation. Fix that by considering the tunnel type for encap contexts. Fixes: df2ef3bff193 ("net/mlx5e: Add GRE protocol offloading") Signed-off-by: Eli Britstein <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5e: Update xon formulaHuy Nguyen1-12/+16
Set xon = xoff - netdev's max_mtu. netdev's max_mtu will give enough time for the pause frame to arrive at the sender. Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Signed-off-by: Huy Nguyen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5e: Update xoff formulaHuy Nguyen1-5/+6
Set minimum speed in xoff threshold formula to 40Gbps Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Signed-off-by: Huy Nguyen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5: E-Switch, fix syndrome (0x678139) when turn on vepaHuy Nguyen1-0/+1
Make sure the struct mlx5_flow_destination is zero before filling in the field. Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by: Huy Nguyen <[email protected]> Reviewed-by: Daniel Jurgens <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5: E-Switch, Fix esw manager vport indication for more vport commandsOmri Kahalon1-4/+2
Traditionally, the PF (Physical Function) which resides on vport 0 was the E-switch manager. Since the ECPF (Embedded CPU Physical Function), which resides on vport 0xfffe, was introduced as the E-Switch manager, the assumption that the E-switch manager is on vport 0 is incorrect. Since the eswitch code already uses the actual vport value, all we need is to always set other_vport=1. Signed-off-by: Omri Kahalon <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5: E-Switch, Protect from invalid memory access in offload fdb tableRoi Dayan1-0/+1
The esw offloads structures share a union with the legacy mode structs. Reset the offloads struct to zero in init to protect from null assumptions made by the legacy mode code. Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Or Gerlitz <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5e: Correctly use the namespace type when allocating pedit actionTonghao Zhang1-1/+1
The capacity of FDB offloading and NIC offloading table are different, and when allocating the pedit actions, we should use the correct namespace type. Fixes: c500c86b0c75d ("net/mlx5e: support for two independent packet edit actions") Cc: Pablo Neira Ayuso <[email protected]> Signed-off-by: Tonghao Zhang <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Acked-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5: E-Switch, Fix access to invalid memory when toggling esw modesRoi Dayan1-0/+2
The esw fdb table has a union of legacy and offloads members. So if we were in a certain esw mode we could set some memebers and not set null which is fine as on destroy path and don't care. But then moving from legacy to switchdev a second time, the cleanup flow of legacy mode checks if a struct member was in use if it's not null so we need to make sure to reset the code to null when we init legacy mode. Fixes: 8da202b24913 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Huy Nguyen <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5: ethtool, Allow legacy link-modes configuration via non-extended ptysAya Levin2-19/+31
Allow configuration of legacy link-modes even when extended link-modes are supported. This requires reading of legacy advertisement even when extended link-modes are supported. Since legacy and extended advertisement are mutually excluded, wait for empty reply from extended advertisement before reading legacy advertisement. Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes") Signed-off-by: Aya Levin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5: ethtool, Fix type analysis of advertised link-modeAya Levin1-2/+3
Ethtool option set_link_ksettings allows setting of legacy link-modes or extended link-modes. Refine the decision of which type of link-modes is set. Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes") Signed-off-by: Aya Levin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5e: Add a lock on tir listYuval Avnery1-0/+7
Refresh tirs is looping over a global list of tirs while netdevs are adding and removing tirs from that list. That is why a lock is required. Fixes: 724b2aa15126 ("net/mlx5e: TIRs management refactoring") Signed-off-by: Yuval Avnery <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net: mlx5: Add a missing check on idr_find, free bufAditya Pakki1-3/+11
idr_find() can return a NULL value to 'flow' which is used without a check. The patch adds a check to avoid potential NULL pointer dereference. In case of mlx5_fpga_sbu_conn_sendmsg() failure, free buf allocated using kzalloc. Fixes: ab412e1dd7db ("net/mlx5: Accel, add TLS rx offload routines") Signed-off-by: Aditya Pakki <[email protected]> Reviewed-by: Yuval Shaia <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5e: Allow IPv4 ttl & IPv6 hop_limit rewrite for all L4 protocolsDmytro Linkin1-4/+48
For some protocols we are not allowing IP header rewrite offload, since the HW is not capable to properly adjust the l4 checksum. However, TTL & HOPLIMIT modification can be done for all IP protocols, because they are not part of the pseudo header taken into account for checksum. Fixes: 738678817573 ("drivers: net: use flow action infrastructure") Signed-off-by: Dmytro Linkin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5e: Fix error handling when refreshing TIRsGavi Teitz1-2/+4
Previously, a false positive would be caught if the TIRs list is empty, since the err value was initialized to -ENOMEM, and was only updated if a TIR is refreshed. This is resolved by initializing the err value to zero. Fixes: b676f653896a ("net/mlx5e: Refactor refresh TIRs") Signed-off-by: Gavi Teitz <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29net/mlx5: Decrease default mr cache sizeArtemy Kovalyov1-20/+0
Delete initialization of high order entries in mr cache to decrease initial memory footprint. When required, the administrator can populate the entries with memory keys via the /sys interface. This approach is very helpful to significantly reduce the per HW function memory footprint in virtualization environments such as SRIOV. Fixes: 9603b61de1ee ("mlx5: Move pci device handling from mlx5_ib to mlx5_core") Signed-off-by: Artemy Kovalyov <[email protected]> Signed-off-by: Moni Shoua <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reported-by: Shalom Toledo <[email protected]> Acked-by: Or Gerlitz <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-03-29ipv6: Move ipv6 stubs to a separate header fileDavid Ahern4-0/+4
The number of stubs is growing and has nothing to do with addrconf. Move the definition of the stubs to a separate header file and update users. In the move, drop the vxlan specific comment before ipv6_stub. Code move only; no functional change intended. Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29ipv6: Rename fib6_nh entriesDavid Ahern1-16/+18
Rename fib6_nh entries that will be moved to a fib_nh_common struct. Specifically, the device, gateway, flags, and lwtstate are common with all nexthop definitions. In some places new temporary variables are declared or local variables renamed to maintain line lengths. Rename only; no functional change intended. Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29ipv4: Rename fib_nh entriesDavid Ahern3-22/+22
Rename fib_nh entries that will be moved to a fib_nh_common struct. Specifically, the device, oif, gateway, flags, scope, lwtstate, nh_weight and nh_upper_bound are common with all nexthop definitions. In the process shorten fib_nh_lwtstate to fib_nh_lws to avoid really long lines. Rename only; no functional change intended. Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-29ipv6: Move gateway checks to a fib6_nh settingDavid Ahern1-2/+2
The gateway setting is not per fib6_info entry but per-fib6_nh. Add a new fib_nh_has_gw flag to fib6_nh and convert references to RTF_GATEWAY to the new flag. For IPv6 address the flag is cheaper than checking that nh_gw is non-0 like IPv4 does. While this increases fib6_nh by 8-bytes, the effective allocation size of a fib6_info is unchanged. The 8 bytes is recovered later with a fib_nh_common change. Signed-off-by: David Ahern <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28nfp: disable netpoll on representorsJakub Kicinski1-1/+1
NFP reprs are software device on top of the PF's vNIC. The comment above __dev_queue_xmit() sayeth: When calling this method, interrupts MUST be enabled. This is because the BH enable code must have IRQs enabled so that it will not deadlock. For netconsole we can't guarantee IRQ state, let's just disable netpoll on representors to be on the safe side. When the initial implementation of NFP reprs was added by the commit 5de73ee46704 ("nfp: general representor implementation") .ndo_poll_controller was required for netpoll to be enabled. Fixes: ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: John Hurley <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28nfp: validate the return code from dev_queue_xmit()Jakub Kicinski1-1/+1
dev_queue_xmit() may return error codes as well as netdev_tx_t, and it always consumes the skb. Make sure we always return a correct netdev_tx_t value. Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: John Hurley <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28net: mvneta: Add 2500BaseT supportMaxime Chevallier1-0/+1
Some PHYs will use the 2500BaseX PHY_INTERFACE_MODE when being linked with a partner using 2.5GBaseT. Since we can't autonegotiate this speed between the MAC and the PHY, we need to have the proper comphy support enabled, to make sure we can safely advertise 2.5G and 1G in BaseT and be able to switch between both corresponding PHY interface modes. This is now possible since comphy support was added to this driver. This commit adds the 2500BaseT mode to the list of supported modes when using 2500BaseX, and was tested on a setup with an Armada385 and a 88E2010 PHY, both with and without the comphy node in the DT. Signed-off-by: Maxime Chevallier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28qmi_wwan: add Olicard 600Bjørn Mork1-0/+1
This is a Qualcomm based device with a QMI function on interface 4. It is mode switched from 2020:2030 using a standard eject message. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2031 Rev= 2.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28Merge branch '40GbE' of ↵David S. Miller6-60/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Fixes 2019-03-26 This series contains updates to igb, ixgbe, i40e and fm10k. Jake fixes an issue with PTP in i40e where a previous commit resulted in a regression where the driver would interpret small negative adjustments as large positive additions, resulting in incorrect behavior. Arvind Sankar fixes an issue in igb where a previous commit would cause a warning in the PCI pm core and resulted in pci_pm_runtime_suspend would not call pci_save_state or pci_finish_runtime_suspend. Ivan Vecera fixes MDIO bus registration with ixgbe, where the driver was ignoring errors returned when registering and would leave the pointer in a NULL state which triggered a BUG when un-registering. Stefan Assmann fixes the check for Wake-On-LAN for i40e, which only supports magic packet. Yue Haibing fixes a potential NULL pointer de-reference in fm10k by adding a simple check if the value is NULL. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-03-28nfp: do not handle nn->port defined case in nfp_net_get_phys_port_name()Jiri Pirko1-1/+4
If nn->port is defined it means that devlink_port has been registered for this port as well. Devlink core is handling the port name formatting. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28bnxt: remove ndo_get_phys_port_name implementationJiri Pirko1-18/+0
Rely on the previously introduced fallback and let the core call devlink in order to get the physical port name. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28bnxt: implement ndo_get_devlink_portJiri Pirko1-1/+9
In order for devlink compat functions to work, implement ndo_get_devlink_port. Legacy slaves does not have devlink port instances created for themselves. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28mlxsw: Remove ndo_get_phys_port_name implementationJiri Pirko5-45/+0
Rely on the previously introduced fallback and let the core call devlink directly in order to get the physical port name. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28mlxsw: Implement ndo_get_devlink_portJiri Pirko5-0/+48
In order for devlink compat functions to work, implement ndo_get_devlink_port. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28net: replace ndo_get_devlink with ndo_get_devlink_portJiri Pirko4-8/+8
Follow-up patch is going to need a devlink port instance according to a netdev. Devlink port instance should be always available when devlink is used. So change the recently introduced ndo_get_devlink to ndo_get_devlink_port. With that, adjust the wrapper for the only user to get devlink pointer. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Michal Kubecek <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-28nfp: register devlink port before netdevJiri Pirko1-15/+17
Change the init/fini flow and register devlink port instance before netdev. Now it is needed for correct behavior of phys_port_name generation, but in general it makes sense to register devlink port first. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-27vrf: prevent adding upper devicesSabrina Dubroca1-0/+1
VRF devices don't work with upper devices. Currently, it's possible to add a VRF device to a bridge or team, and to create macvlan, macsec, or ipvlan devices on top of a VRF (bond and vlan are prevented respectively by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED feature flag). Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit f5426250a6ec ("net: introduce IFF_NO_RX_HANDLER")). Cc: David Ahern <[email protected]> Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Signed-off-by: Sabrina Dubroca <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-27thunderx: eliminate extra calls to put_page() for pages held for recyclingDean Nelson1-4/+3
For the non-XDP case, commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing the additional receive buffer page reference held for recycling, repeatedly calls put_page() until the page's _refcount goes to zero. Which results in the page being freed. This is not okay if the page's _refcount was greater than 1 (in the non-XDP case), because nicvf_free_rbdr() should not be subtracting more than what nicvf_alloc_page() had previously added to the page's _refcount, which was only 1 (in the non-XDP case). This can arise if a received packet is still being processed and the receive buffer (i.e., skb->head) has not yet been freed via skb_free_head() when nicvf_free_rbdr() is spinning through the aforementioned put_page() loop. If this should occur, when the received packet finishes processing and skb_free_head() is called, various problems can ensue. Exactly what, depends on whether the page has already been reallocated or not, anything from "BUG: Bad page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or "Unable to handle kernel paging request...". So this patch changes nicvf_free_rbdr() to only call put_page() once for pages held for recycling (in the non-XDP case). Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-27thunderx: enable page recycling for non-XDP caseDean Nelson1-12/+11
Commit 773225388dae15e72790 ("net: thunderx: Optimize page recycling for XDP") added code to nicvf_alloc_page() that inadvertently disables receive buffer page recycling for the non-XDP case by always NULL'ng the page pointer. This patch corrects two if-conditionals to allow for the recycling of non-XDP mode pages by only setting the page pointer to NULL when the page is not ready for recycling. Fixes: 773225388dae ("net: thunderx: Optimize page recycling for XDP") Signed-off-by: Dean Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>