aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-07-19drivers: net: fix return value check in emac_tso_csum()Yuanjun Gong1-2/+5
in emac_tso_csum(), return an error code if an unexpected value is returned by pskb_trim(). Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-18Merge branch '40GbE' of ↵Jakub Kicinski4-111/+176
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-17 (iavf) This series contains updates to iavf driver only. Ding Hui fixes use-after-free issue by calling netif_napi_del() for all allocated q_vectors. He also resolves out-of-bounds issue by not updating to new values when timeout is encountered. Marcin and Ahmed change the way resets are handled so that the callback operating under the RTNL lock will wait for the reset to finish, the rtnl_lock sensitive functions in reset flow will schedule the netdev update for later in order to remove circular dependency with the critical lock. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: fix reset task race with iavf_remove() iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies Revert "iavf: Do not restart Tx queues after reset task failure" Revert "iavf: Detach device during reset task" iavf: Wait for reset in callbacks which trigger it iavf: use internal state to free traffic IRQs iavf: Fix out-of-bounds when setting channels on remove iavf: Fix use-after-free in free_netdev ==================== Link: https://lore.kernel.org/r/20230717175205.3217774-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18octeontx2-pf: mcs: Generate hash key using ecb(aes)Subbaraya Sundeep1-37/+100
Hardware generated encryption and ICV tags are found to be wrong when tested with IEEE MACSEC test vectors. This is because as per the HRM, the hash key (derived by AES-ECB block encryption of an all 0s block with the SAK) has to be programmed by the software in MCSX_RS_MCS_CPM_TX_SLAVE_SA_PLCY_MEM_4X register. Hence fix this by generating hash key in software and configuring in hardware. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/1689574603-28093-1-git-send-email-sbhatta@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18igc: Prevent garbled TX queue with XDP ZEROCOPYFlorian Kauer1-2/+2
In normal operation, each populated queue item has next_to_watch pointing to the last TX desc of the packet, while each cleaned item has it set to 0. In particular, next_to_use that points to the next (necessarily clean) item to use has next_to_watch set to 0. When the TX queue is used both by an application using AF_XDP with ZEROCOPY as well as a second non-XDP application generating high traffic, the queue pointers can get in an invalid state where next_to_use points to an item where next_to_watch is NOT set to 0. However, the implementation assumes at several places that this is never the case, so if it does hold, bad things happen. In particular, within the loop inside of igc_clean_tx_irq(), next_to_clean can overtake next_to_use. Finally, this prevents any further transmission via this queue and it never gets unblocked or signaled. Secondly, if the queue is in this garbled state, the inner loop of igc_clean_tx_ring() will never terminate, completely hogging a CPU core. The reason is that igc_xdp_xmit_zc() reads next_to_use before acquiring the lock, and writing it back (potentially unmodified) later. If it got modified before locking, the outdated next_to_use is written pointing to an item that was already used elsewhere (and thus next_to_watch got written). Fixes: 9acf59a752d4 ("igc: Enable TX via AF_XDP zero-copy") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230717175444.3217831-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18Merge tag 'linux-can-fixes-for-6.5-20230717' of ↵Jakub Kicinski3-58/+83
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-07-17 The 1st patch is by Ziyang Xuan and fixes a possible memory leak in the receiver handling in the CAN RAW protocol. YueHaibing contributes a use after free in bcm_proc_show() of the Broad Cast Manager (BCM) CAN protocol. The next 2 patches are by me and fix a possible null pointer dereference in the RX path of the gs_usb driver with activated hardware timestamps and the candlelight firmware. The last patch is by Fedor Ross, Marek Vasut and me and targets the mcp251xfd driver. The polling timeout of __mcp251xfd_chip_set_mode() is increased to fix bus joining on busy CAN buses and very low bit rate. * tag 'linux-can-fixes-for-6.5-20230717' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout can: gs_usb: fix time stamp counter initialization can: gs_usb: gs_can_open(): improve error handling can: bcm: Fix UAF in bcm_proc_show() can: raw: fix receiver memory leak ==================== Link: https://lore.kernel.org/r/20230717180938.230816-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-18octeontx2-pf: Dont allocate BPIDs for LBK interfacesGeetha sowjanya1-2/+3
Current driver enables backpressure for LBK interfaces. But these interfaces do not support this feature. Hence, this patch fixes the issue by skipping the backpressure configuration for these interfaces. Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20230716093741.28063-1-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-18vrf: Fix lockdep splat in output pathIdo Schimmel1-6/+6
Cited commit converted the neighbour code to use the standard RCU variant instead of the RCU-bh variant, but the VRF code still uses rcu_read_lock_bh() / rcu_read_unlock_bh() around the neighbour lookup code in its IPv4 and IPv6 output paths, resulting in lockdep splats [1][2]. Can be reproduced using [3]. Fix by switching to rcu_read_lock() / rcu_read_unlock(). [1] ============================= WARNING: suspicious RCU usage 6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted ----------------------------- include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ping/183: #0: ffff888105ea1d80 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xc6c/0x33c0 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output+0x2e3/0x2030 stack backtrace: CPU: 0 PID: 183 Comm: ping Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 lockdep_rcu_suspicious+0x211/0x3b0 vrf_output+0x1380/0x2030 ip_push_pending_frames+0x125/0x2a0 raw_sendmsg+0x200d/0x33c0 inet_sendmsg+0xa2/0xe0 __sys_sendto+0x2aa/0x420 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [2] ============================= WARNING: suspicious RCU usage 6.5.0-rc1-custom-g9c099e6dbf98 #403 Not tainted ----------------------------- include/net/neighbour.h:302 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ping6/182: #0: ffff888114b63000 (sk_lock-AF_INET6){+.+.}-{0:0}, at: rawv6_sendmsg+0x1602/0x3e50 #1: ffffffff85b46820 (rcu_read_lock_bh){....}-{1:2}, at: vrf_output6+0xe9/0x1310 stack backtrace: CPU: 0 PID: 182 Comm: ping6 Not tainted 6.5.0-rc1-custom-g9c099e6dbf98 #403 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 lockdep_rcu_suspicious+0x211/0x3b0 vrf_output6+0xd32/0x1310 ip6_local_out+0xb4/0x1a0 ip6_send_skb+0xbc/0x340 ip6_push_pending_frames+0xe5/0x110 rawv6_sendmsg+0x2e6e/0x3e50 inet_sendmsg+0xa2/0xe0 __sys_sendto+0x2aa/0x420 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [3] #!/bin/bash ip link add name vrf-red up numtxqueues 2 type vrf table 10 ip link add name swp1 up master vrf-red type dummy ip address add 192.0.2.1/24 dev swp1 ip address add 2001:db8:1::1/64 dev swp1 ip neigh add 192.0.2.2 lladdr 00:11:22:33:44:55 nud perm dev swp1 ip neigh add 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud perm dev swp1 ip vrf exec vrf-red ping 192.0.2.2 -c 1 &> /dev/null ip vrf exec vrf-red ping6 2001:db8:1::2 -c 1 &> /dev/null Fixes: 09eed1192cec ("neighbour: switch to standard rcu, instead of rcu_bh") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/netdev/CA+G9fYtEr-=GbcXNDYo3XOkwR+uYgehVoDjsP0pFLUpZ_AZcyg@mail.gmail.com/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230715153605.4068066-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-18Merge branch '100GbE' of ↵Paolo Abeni4-31/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-14 (ice) This series contains updates to ice driver only. Petr Oros removes multiple calls made to unregister netdev and devlink_port. Michal fixes null pointer dereference that can occur during reload. ==================== Link: https://lore.kernel.org/r/20230714201041.1717834-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-17can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeoutFedor Ross2-2/+9
The mcp251xfd controller needs an idle bus to enter 'Normal CAN 2.0 mode' or . The maximum length of a CAN frame is 736 bits (64 data bytes, CAN-FD, EFF mode, worst case bit stuffing and interframe spacing). For low bit rates like 10 kbit/s the arbitrarily chosen MCP251XFD_POLL_TIMEOUT_US of 1 ms is too small. Otherwise during polling for the CAN controller to enter 'Normal CAN 2.0 mode' the timeout limit is exceeded and the configuration fails with: | $ ip link set dev can1 up type can bitrate 10000 | [ 731.911072] mcp251xfd spi2.1 can1: Controller failed to enter mode CAN 2.0 Mode (6) and stays in Configuration Mode (4) (con=0x068b0760, osc=0x00000468). | [ 731.927192] mcp251xfd spi2.1 can1: CRC read error at address 0x0e0c (length=4, data=00 00 00 00, CRC=0x0000) retrying. | [ 731.938101] A link change request failed with some changes committed already. Interface can1 may have been left with an inconsistent configuration, please check. | RTNETLINK answers: Connection timed out Make MCP251XFD_POLL_TIMEOUT_US timeout calculation dynamic. Use maximum of 1ms and bit time of 1 full 64 data bytes CAN-FD frame in EFF mode, worst case bit stuffing and interframe spacing at the current bit rate. For easier backporting define the macro MCP251XFD_FRAME_LEN_MAX_BITS that holds the max frame length in bits, which is 736. This can be replaced by can_frame_bits(true, true, true, true, CANFD_MAX_DLEN) in a cleanup patch later. Fixes: 55e5b97f003e8 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Signed-off-by: Fedor Ross <fedor.ross@ifm.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20230717-mcp251xfd-fix-increase-poll-timeout-v5-1-06600f34c684@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-17iavf: fix reset task race with iavf_remove()Ahmed Zaki4-29/+16
The reset task is currently scheduled from the watchdog or adminq tasks. First, all direct calls to schedule the reset task are replaced with the iavf_schedule_reset(), which is modified to accept the flag showing the type of reset. To prevent the reset task from starting once iavf_remove() starts, we need to check the __IAVF_IN_REMOVE_TASK bit before we schedule it. This is now easily added to iavf_schedule_reset(). Finally, remove the check for IAVF_FLAG_RESET_NEEDED in the watchdog task. It is redundant since all callers who set the flag immediately schedules the reset task. Fixes: 3ccd54ef44eb ("iavf: Fix init state closure on remove") Fixes: 14756b2ae265 ("iavf: Fix __IAVF_RESETTING state usage") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: fix a deadlock caused by rtnl and driver's lock circular dependenciesAhmed Zaki3-32/+85
A driver's lock (crit_lock) is used to serialize all the driver's tasks. Lockdep, however, shows a circular dependency between rtnl and crit_lock. This happens when an ndo that already holds the rtnl requests the driver to reset, since the reset task (in some paths) tries to grab rtnl to either change real number of queues of update netdev features. [566.241851] ====================================================== [566.241893] WARNING: possible circular locking dependency detected [566.241936] 6.2.14-100.fc36.x86_64+debug #1 Tainted: G OE [566.241984] ------------------------------------------------------ [566.242025] repro.sh/2604 is trying to acquire lock: [566.242061] ffff9280fc5ceee8 (&adapter->crit_lock){+.+.}-{3:3}, at: iavf_close+0x3c/0x240 [iavf] [566.242167] but task is already holding lock: [566.242209] ffffffff9976d350 (rtnl_mutex){+.+.}-{3:3}, at: iavf_remove+0x6b5/0x730 [iavf] [566.242300] which lock already depends on the new lock. [566.242353] the existing dependency chain (in reverse order) is: [566.242401] -> #1 (rtnl_mutex){+.+.}-{3:3}: [566.242451] __mutex_lock+0xc1/0xbb0 [566.242489] iavf_init_interrupt_scheme+0x179/0x440 [iavf] [566.242560] iavf_watchdog_task+0x80b/0x1400 [iavf] [566.242627] process_one_work+0x2b3/0x560 [566.242663] worker_thread+0x4f/0x3a0 [566.242696] kthread+0xf2/0x120 [566.242730] ret_from_fork+0x29/0x50 [566.242763] -> #0 (&adapter->crit_lock){+.+.}-{3:3}: [566.242815] __lock_acquire+0x15ff/0x22b0 [566.242869] lock_acquire+0xd2/0x2c0 [566.242901] __mutex_lock+0xc1/0xbb0 [566.242934] iavf_close+0x3c/0x240 [iavf] [566.242997] __dev_close_many+0xac/0x120 [566.243036] dev_close_many+0x8b/0x140 [566.243071] unregister_netdevice_many_notify+0x165/0x7c0 [566.243116] unregister_netdevice_queue+0xd3/0x110 [566.243157] iavf_remove+0x6c1/0x730 [iavf] [566.243217] pci_device_remove+0x33/0xa0 [566.243257] device_release_driver_internal+0x1bc/0x240 [566.243299] pci_stop_bus_device+0x6c/0x90 [566.243338] pci_stop_and_remove_bus_device+0xe/0x20 [566.243380] pci_iov_remove_virtfn+0xd1/0x130 [566.243417] sriov_disable+0x34/0xe0 [566.243448] ice_free_vfs+0x2da/0x330 [ice] [566.244383] ice_sriov_configure+0x88/0xad0 [ice] [566.245353] sriov_numvfs_store+0xde/0x1d0 [566.246156] kernfs_fop_write_iter+0x15e/0x210 [566.246921] vfs_write+0x288/0x530 [566.247671] ksys_write+0x74/0xf0 [566.248408] do_syscall_64+0x58/0x80 [566.249145] entry_SYSCALL_64_after_hwframe+0x72/0xdc [566.249886] other info that might help us debug this: [566.252014] Possible unsafe locking scenario: [566.253432] CPU0 CPU1 [566.254118] ---- ---- [566.254800] lock(rtnl_mutex); [566.255514] lock(&adapter->crit_lock); [566.256233] lock(rtnl_mutex); [566.256897] lock(&adapter->crit_lock); [566.257388] *** DEADLOCK *** The deadlock can be triggered by a script that is continuously resetting the VF adapter while doing other operations requiring RTNL, e.g: while :; do ip link set $VF up ethtool --set-channels $VF combined 2 ip link set $VF down ip link set $VF up ethtool --set-channels $VF combined 4 ip link set $VF down done Any operation that triggers a reset can substitute "ethtool --set-channles" As a fix, add a new task "finish_config" that do all the work which needs rtnl lock. With the exception of iavf_remove(), all work that require rtnl should be called from this task. As for iavf_remove(), at the point where we need to call unregister_netdevice() (and grab rtnl_lock), we make sure the finish_config task is not running (cancel_work_sync()) to safely grab rtnl. Subsequent finish_config work cannot restart after that since the task is guarded by the __IAVF_IN_REMOVE_TASK bit in iavf_schedule_finish_config(). Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17Revert "iavf: Do not restart Tx queues after reset task failure"Marcin Szycik1-15/+0
This reverts commit 08f1c147b7265245d67321585c68a27e990e0c4b. Netdev is no longer being detached during reset, so this fix can be reverted. We leave the removal of "hacky" IFF_UP flag update. Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17Revert "iavf: Detach device during reset task"Marcin Szycik1-11/+2
This reverts commit aa626da947e9cd30c4cf727493903e1adbb2c0a0. Detaching device during reset was not fully fixing the rtnl locking issue, as there could be a situation where callback was already in progress before detaching netdev. Furthermore, detaching netdevice causes TX timeouts if traffic is running. To reproduce: ip netns exec ns1 iperf3 -c $PEER_IP -t 600 --logfile /dev/null & while :; do for i in 200 7000 400 5000 300 3000 ; do ip netns exec ns1 ip link set $VF1 mtu $i sleep 2 done sleep 10 done Currently, callbacks such as iavf_change_mtu() wait for the reset. If the reset fails to acquire the rtnl_lock, they schedule the netdev update for later while continuing the reset flow. Operations like MTU changes are performed under the rtnl_lock. Therefore, when the operation finishes, another callback that uses rtnl_lock can start. Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: Wait for reset in callbacks which trigger itMarcin Szycik4-17/+68
There was a fail when trying to add the interface to bonding right after changing the MTU on the interface. It was caused by bonding interface unable to open the interface due to interface being in __RESETTING state because of MTU change. Add new reset_waitqueue to indicate that reset has finished. Add waiting for reset to finish in callbacks which trigger hw reset: iavf_set_priv_flags(), iavf_change_mtu() and iavf_set_ringparam(). We use a 5000ms timeout period because on Hyper-V based systems, this operation takes around 3000-4000ms. In normal circumstances, it doesn't take more than 500ms to complete. Add a function iavf_wait_for_reset() to reuse waiting for reset code and use it also in iavf_set_channels(), which already waits for reset. We don't use error handling in iavf_set_channels() as this could cause the device to be in incorrect state if the reset was scheduled but hit timeout or the waitng function was interrupted by a signal. Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count") Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Co-developed-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: use internal state to free traffic IRQsAhmed Zaki1-3/+4
If the system tries to close the netdev while iavf_reset_task() is running, __LINK_STATE_START will be cleared and netif_running() will return false in iavf_reinit_interrupt_scheme(). This will result in iavf_free_traffic_irqs() not being called and a leak as follows: [7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0' [7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0 is shown when pci_disable_msix() is later called. Fix by using the internal adapter state. The traffic IRQs will always exist if state == __IAVF_RUNNING. Fixes: 5b36e8d04b44 ("i40evf: Enable VF to request an alternate queue allocation") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: Fix out-of-bounds when setting channels on removeDing Hui1-1/+1
If we set channels greater during iavf_remove(), and waiting reset done would be timeout, then returned with error but changed num_active_queues directly, that will lead to OOB like the following logs. Because the num_active_queues is greater than tx/rx_rings[] allocated actually. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 3506.152887] iavf 0000:41:02.0: Removing device [ 3510.400799] ================================================================== [ 3510.400820] BUG: KASAN: slab-out-of-bounds in iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400823] Read of size 8 at addr ffff88b6f9311008 by task repro.sh/55536 [ 3510.400823] [ 3510.400830] CPU: 101 PID: 55536 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 3510.400832] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 3510.400835] Call Trace: [ 3510.400851] dump_stack+0x71/0xab [ 3510.400860] print_address_description+0x6b/0x290 [ 3510.400865] ? iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400868] kasan_report+0x14a/0x2b0 [ 3510.400873] iavf_free_all_tx_resources+0x156/0x160 [iavf] [ 3510.400880] iavf_remove+0x2b6/0xc70 [iavf] [ 3510.400884] ? iavf_free_all_rx_resources+0x160/0x160 [iavf] [ 3510.400891] ? wait_woken+0x1d0/0x1d0 [ 3510.400895] ? notifier_call_chain+0xc1/0x130 [ 3510.400903] pci_device_remove+0xa8/0x1f0 [ 3510.400910] device_release_driver_internal+0x1c6/0x460 [ 3510.400916] pci_stop_bus_device+0x101/0x150 [ 3510.400919] pci_stop_and_remove_bus_device+0xe/0x20 [ 3510.400924] pci_iov_remove_virtfn+0x187/0x420 [ 3510.400927] ? pci_iov_add_virtfn+0xe10/0xe10 [ 3510.400929] ? pci_get_subsys+0x90/0x90 [ 3510.400932] sriov_disable+0xed/0x3e0 [ 3510.400936] ? bus_find_device+0x12d/0x1a0 [ 3510.400953] i40e_free_vfs+0x754/0x1210 [i40e] [ 3510.400966] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 3510.400968] ? pci_get_device+0x7c/0x90 [ 3510.400970] ? pci_get_subsys+0x90/0x90 [ 3510.400982] ? pci_vfs_assigned.part.7+0x144/0x210 [ 3510.400987] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.400996] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 3510.401001] sriov_numvfs_store+0x214/0x290 [ 3510.401005] ? sriov_totalvfs_show+0x30/0x30 [ 3510.401007] ? __mutex_lock_slowpath+0x10/0x10 [ 3510.401011] ? __check_object_size+0x15a/0x350 [ 3510.401018] kernfs_fop_write+0x280/0x3f0 [ 3510.401022] vfs_write+0x145/0x440 [ 3510.401025] ksys_write+0xab/0x160 [ 3510.401028] ? __ia32_sys_read+0xb0/0xb0 [ 3510.401031] ? fput_many+0x1a/0x120 [ 3510.401032] ? filp_close+0xf0/0x130 [ 3510.401038] do_syscall_64+0xa0/0x370 [ 3510.401041] ? page_fault+0x8/0x30 [ 3510.401043] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 3510.401073] RIP: 0033:0x7f3a9bb842c0 [ 3510.401079] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 3510.401080] RSP: 002b:00007ffc05f1fe18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3510.401083] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3a9bb842c0 [ 3510.401085] RDX: 0000000000000002 RSI: 0000000002327408 RDI: 0000000000000001 [ 3510.401086] RBP: 0000000002327408 R08: 00007f3a9be53780 R09: 00007f3a9c8a4700 [ 3510.401086] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 3510.401087] R13: 0000000000000001 R14: 00007f3a9be52620 R15: 0000000000000001 [ 3510.401090] [ 3510.401093] Allocated by task 76795: [ 3510.401098] kasan_kmalloc+0xa6/0xd0 [ 3510.401099] __kmalloc+0xfb/0x200 [ 3510.401104] iavf_init_interrupt_scheme+0x26f/0x1310 [iavf] [ 3510.401108] iavf_watchdog_task+0x1d58/0x4050 [iavf] [ 3510.401114] process_one_work+0x56a/0x11f0 [ 3510.401115] worker_thread+0x8f/0xf40 [ 3510.401117] kthread+0x2a0/0x390 [ 3510.401119] ret_from_fork+0x1f/0x40 [ 3510.401122] 0xffffffffffffffff [ 3510.401123] In timeout handling, we should keep the original num_active_queues and reset num_req_queues to 0. Fixes: 4e5e6b5d9d13 ("iavf: Fix return of set the new channel count") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17iavf: Fix use-after-free in free_netdevDing Hui1-4/+1
We do netif_napi_add() for all allocated q_vectors[], but potentially do netif_napi_del() for part of them, then kfree q_vectors and leave invalid pointers at dev->napi_list. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 4093.900222] ================================================================== [ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390 [ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699 [ 4093.900233] [ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 4093.900239] Call Trace: [ 4093.900244] dump_stack+0x71/0xab [ 4093.900249] print_address_description+0x6b/0x290 [ 4093.900251] ? free_netdev+0x308/0x390 [ 4093.900252] kasan_report+0x14a/0x2b0 [ 4093.900254] free_netdev+0x308/0x390 [ 4093.900261] iavf_remove+0x825/0xd20 [iavf] [ 4093.900265] pci_device_remove+0xa8/0x1f0 [ 4093.900268] device_release_driver_internal+0x1c6/0x460 [ 4093.900271] pci_stop_bus_device+0x101/0x150 [ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900275] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10 [ 4093.900278] ? pci_get_subsys+0x90/0x90 [ 4093.900280] sriov_disable+0xed/0x3e0 [ 4093.900282] ? bus_find_device+0x12d/0x1a0 [ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 4093.900299] ? pci_get_device+0x7c/0x90 [ 4093.900300] ? pci_get_subsys+0x90/0x90 [ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210 [ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900318] sriov_numvfs_store+0x214/0x290 [ 4093.900320] ? sriov_totalvfs_show+0x30/0x30 [ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900323] ? __check_object_size+0x15a/0x350 [ 4093.900326] kernfs_fop_write+0x280/0x3f0 [ 4093.900329] vfs_write+0x145/0x440 [ 4093.900330] ksys_write+0xab/0x160 [ 4093.900332] ? __ia32_sys_read+0xb0/0xb0 [ 4093.900334] ? fput_many+0x1a/0x120 [ 4093.900335] ? filp_close+0xf0/0x130 [ 4093.900338] do_syscall_64+0xa0/0x370 [ 4093.900339] ? page_fault+0x8/0x30 [ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900357] RIP: 0033:0x7f16ad4d22c0 [ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0 [ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001 [ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700 [ 4093.900364] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000002 [ 4093.900365] R13: 0000000000000001 R14: 00007f16ad7a0620 R15: 0000000000000001 [ 4093.900367] [ 4093.900368] Allocated by task 820: [ 4093.900371] kasan_kmalloc+0xa6/0xd0 [ 4093.900373] __kmalloc+0xfb/0x200 [ 4093.900376] iavf_init_interrupt_scheme+0x63b/0x1320 [iavf] [ 4093.900380] iavf_watchdog_task+0x3d51/0x52c0 [iavf] [ 4093.900382] process_one_work+0x56a/0x11f0 [ 4093.900383] worker_thread+0x8f/0xf40 [ 4093.900384] kthread+0x2a0/0x390 [ 4093.900385] ret_from_fork+0x1f/0x40 [ 4093.900387] 0xffffffffffffffff [ 4093.900387] [ 4093.900388] Freed by task 6699: [ 4093.900390] __kasan_slab_free+0x137/0x190 [ 4093.900391] kfree+0x8b/0x1b0 [ 4093.900394] iavf_free_q_vectors+0x11d/0x1a0 [iavf] [ 4093.900397] iavf_remove+0x35a/0xd20 [iavf] [ 4093.900399] pci_device_remove+0xa8/0x1f0 [ 4093.900400] device_release_driver_internal+0x1c6/0x460 [ 4093.900401] pci_stop_bus_device+0x101/0x150 [ 4093.900402] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900403] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900404] sriov_disable+0xed/0x3e0 [ 4093.900409] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900415] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900416] sriov_numvfs_store+0x214/0x290 [ 4093.900417] kernfs_fop_write+0x280/0x3f0 [ 4093.900418] vfs_write+0x145/0x440 [ 4093.900419] ksys_write+0xab/0x160 [ 4093.900420] do_syscall_64+0xa0/0x370 [ 4093.900421] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900422] 0xffffffffffffffff [ 4093.900422] [ 4093.900424] The buggy address belongs to the object at ffff88b4dc144200 which belongs to the cache kmalloc-8k of size 8192 [ 4093.900425] The buggy address is located 5184 bytes inside of 8192-byte region [ffff88b4dc144200, ffff88b4dc146200) [ 4093.900425] The buggy address belongs to the page: [ 4093.900427] page:ffffea00d3705000 refcount:1 mapcount:0 mapping:ffff88bf04415c80 index:0x0 compound_mapcount: 0 [ 4093.900430] flags: 0x10000000008100(slab|head) [ 4093.900433] raw: 0010000000008100 dead000000000100 dead000000000200 ffff88bf04415c80 [ 4093.900434] raw: 0000000000000000 0000000000030003 00000001ffffffff 0000000000000000 [ 4093.900434] page dumped because: kasan: bad access detected [ 4093.900435] [ 4093.900435] Memory state around the buggy address: [ 4093.900436] ffff88b4dc145500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900437] ffff88b4dc145580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] >ffff88b4dc145600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900438] ^ [ 4093.900439] ffff88b4dc145680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ffff88b4dc145700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 4093.900440] ================================================================== Although the patch #2 (of 2) can avoid the issue triggered by this repro.sh, there still are other potential risks that if num_active_queues is changed to less than allocated q_vectors[] by unexpected, the mismatched netif_napi_add/del() can also cause UAF. Since we actually call netif_napi_add() for all allocated q_vectors unconditionally in iavf_alloc_q_vectors(), so we should fix it by letting netif_napi_del() match to netif_napi_add(). Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Cc: Donglin Peng <pengdonglin@sangfor.com.cn> Cc: Huang Cun <huangcun@sangfor.com.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Madhu Chittim <madhu.chittim@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-17can: gs_usb: fix time stamp counter initializationMarc Kleine-Budde1-48/+53
If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB. Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") Closes: https://github.com/candle-usb/candleLight_fw/issues/137#issuecomment-1623532076 Cc: stable@vger.kernel.org Cc: John Whittington <git@jbrengineering.co.uk> Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-2-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-17can: gs_usb: gs_can_open(): improve error handlingMarc Kleine-Budde1-9/+22
The gs_usb driver handles USB devices with more than 1 CAN channel. The RX path for all channels share the same bulk endpoint (the transmitted bulk data encodes the channel number). These per-device resources are allocated and submitted by the first opened channel. During this allocation, the resources are either released immediately in case of a failure or the URBs are anchored. All anchored URBs are finally killed with gs_usb_disconnect(). Currently, gs_can_open() returns with an error if the allocation of a URB or a buffer fails. However, if usb_submit_urb() fails, the driver continues with the URBs submitted so far, even if no URBs were successfully submitted. Treat every error as fatal and free all allocated resources immediately. Switch to goto-style error handling, to prepare the driver for more per-device resource allocation. Cc: stable@vger.kernel.org Cc: John Whittington <git@jbrengineering.co.uk> Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-1-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-07-17r8169: fix ASPM-related problem for chip version 42 and 43Heiner Kallweit1-0/+7
Referenced commit missed that for chip versions 42 and 43 ASPM remained disabled in the respective rtl_hw_start_...() routines. This resulted in problems as described in the referenced bug ticket. Therefore re-instantiate the previous logic. Fixes: 5fc3f6c90cca ("r8169: consolidate disabling ASPM before EPHY access") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217635 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-17net: dsa: microchip: correct KSZ8795 static MAC table accessTristram Ha3-5/+18
The KSZ8795 driver code was modified to use on KSZ8863/73, which has different register definitions. Some of the new KSZ8795 register information are wrong compared to previous code. KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading than writing. To compensate that a special code was added to shift the register value by 1 before applying those bits. This is wrong when the code is running on KSZ8863, so this special code is only executed when KSZ8795 is detected. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14ice: prevent NULL pointer deref during reloadMichal Swiatkowski3-4/+21
Calling ethtool during reload can lead to call trace, because VSI isn't configured for some time, but netdev is alive. To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors to 0 after freeing and add a check for ::tx/rx_rings in ring related ethtool ops. Add proper unroll of filters in ice_start_eth(). Reproduction: $watch -n 0.1 -d 'ethtool -g enp24s0f0np0' $devlink dev reload pci/0000:18:00.0 action driver_reinit Call trace before fix: [66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000 [66303.926259] #PF: supervisor read access in kernel mode [66303.926286] #PF: error_code(0x0000) - not-present page [66303.926311] PGD 0 P4D 0 [66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI [66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1 [66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice] [66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48 [66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246 [66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48 [66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000 [66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000 [66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000 [66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50 [66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000 [66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0 [66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [66303.927060] PKRU: 55555554 [66303.927075] Call Trace: [66303.927094] <TASK> [66303.927111] ? __die+0x23/0x70 [66303.927140] ? page_fault_oops+0x171/0x4e0 [66303.927176] ? exc_page_fault+0x7f/0x180 [66303.927209] ? asm_exc_page_fault+0x26/0x30 [66303.927244] ? ice_get_ringparam+0x22/0x50 [ice] [66303.927433] rings_prepare_data+0x62/0x80 [66303.927469] ethnl_default_doit+0xe2/0x350 [66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140 [66303.927538] genl_rcv_msg+0x1b1/0x2c0 [66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10 [66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10 [66303.927615] netlink_rcv_skb+0x58/0x110 [66303.927644] genl_rcv+0x28/0x40 [66303.927665] netlink_unicast+0x19e/0x290 [66303.927691] netlink_sendmsg+0x254/0x4d0 [66303.927717] sock_sendmsg+0x93/0xa0 [66303.927743] __sys_sendto+0x126/0x170 [66303.927780] __x64_sys_sendto+0x24/0x30 [66303.928593] do_syscall_64+0x5d/0x90 [66303.929370] ? __count_memcg_events+0x60/0xa0 [66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30 [66303.930920] ? handle_mm_fault+0x9e/0x350 [66303.931688] ? do_user_addr_fault+0x258/0x740 [66303.932452] ? exc_page_fault+0x7f/0x180 [66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: 5b246e533d01 ("ice: split probe into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14ice: Unregister netdev and devlink_port only oncePetr Oros1-27/+0
Since commit 6624e780a577fc ("ice: split ice_vsi_setup into smaller functions") ice_vsi_release does things twice. There is unregister netdev which is unregistered in ice_deinit_eth also. It also unregisters the devlink_port twice which is also unregistered in ice_deinit_eth(). This double deregistration is hidden because devl_port_unregister ignores the return value of xa_erase. [ 68.642167] Call Trace: [ 68.650385] ice_devlink_destroy_pf_port+0xe/0x20 [ice] [ 68.655656] ice_vsi_release+0x445/0x690 [ice] [ 68.660147] ice_deinit+0x99/0x280 [ice] [ 68.664117] ice_remove+0x1b6/0x5c0 [ice] [ 171.103841] Call Trace: [ 171.109607] ice_devlink_destroy_pf_port+0xf/0x20 [ice] [ 171.114841] ice_remove+0x158/0x270 [ice] [ 171.118854] pci_device_remove+0x3b/0xc0 [ 171.122779] device_release_driver_internal+0xc7/0x170 [ 171.127912] driver_detach+0x54/0x8c [ 171.131491] bus_remove_driver+0x77/0xd1 [ 171.135406] pci_unregister_driver+0x2d/0xb0 [ 171.139670] ice_module_exit+0xc/0x55f [ice] Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14net: ethernet: Remove repeating expressionWang Ming1-1/+0
Identify issues that arise by using the tests/doublebitand.cocci semantic patch. Need to remove duplicate expression in if statement. Signed-off-by: Wang Ming <machel@vivo.com> Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14bna: Remove error checking for debugfs_create_dir()Wang Ming1-5/+0
It is expected that most callers should _ignore_ the errors return by debugfs_create_dir() in bnad_debugfs_init(). Signed-off-by: Wang Ming <machel@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: ethernet: mtk_eth_soc: handle probe deferralDaniel Golle1-18/+11
Move the call to of_get_ethdev_address to mtk_add_mac which is part of the probe function and can hence itself return -EPROBE_DEFER should of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely get rid of the mtk_init function. The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced in situations in which the NVMEM provider holding the MAC address has not yet be loaded at the time mtk_eth_soc is initially probed. In this case probing of mtk_eth_soc should be deferred instead of falling back to use a random MAC address, so once the NVMEM provider becomes available probing can be repeated. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: ethernet: ti: cpsw_ale: Fix cpsw_ale_get_field()/cpsw_ale_set_field()Tanmay Patil1-5/+19
CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words. The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the field will be strictly contained within one word. However, this is not guaranteed to be the case and it is possible for ALE field entries to span across up to two words at the most. Fix the methods to handle getting/setting fields spanning up to two words. Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support") Signed-off-by: Tanmay Patil <t-patil@ti.com> [s-vadapalli@ti.com: rephrased commit message and added Fixes tag] Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: dsa: ar9331: Use explict flags for regmap single read/writeMark Brown1-2/+2
The at9331 is only able to read or write a single register at once. The driver has a custom regmap bus and chooses to tell the regmap core about this by reporting the maximum transfer sizes rather than the explicit flags that exist at the regmap level. Since there are a number of problems with the raw transfer limits and the regmap level flags are better integrated anyway convert the driver to use the flags. No functional change. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-13net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urbAlan Stern1-0/+6
The syzbot fuzzer identified a problem in the usbnet driver: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Workqueue: mld mld_ifc_work RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc9000463f568 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001 RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003 R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0 Call Trace: <TASK> usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453 __netdev_start_xmit include/linux/netdevice.h:4918 [inline] netdev_start_xmit include/linux/netdevice.h:4932 [inline] xmit_one net/core/dev.c:3578 [inline] dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594 ... This bug is caused by the fact that usbnet trusts the bulk endpoint addresses its probe routine receives in the driver_info structure, and it does not check to see that these endpoints actually exist and have the expected type and directions. The fix is simply to add such a check. Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/ Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13dsa: mv88e6xxx: Do a final check before timing outLinus Walleij1-0/+7
I get sporadic timeouts from the driver when using the MV88E6352. Reading the status again after the loop fixes the problem: the operation is successful but goes undetected. Some added prints show things like this: [ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1b reg 0b, mask 8000, val 0000, data c000 [ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for ATU op 4000, fid 0001 (...) [ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1c reg 18, mask 8000, val 0000, data 9860 [ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting for PHY command 1860 to complete The reason is probably not the commands: I think those are mostly fine with the 50+50ms timeout, but the problem appears when OpenWrt brings up several interfaces in parallel on a system with 7 populated ports: if one of them take more than 50 ms and waits one or more of the others can get stuck on the mutex for the switch and then this can easily multiply. As we sleep and wait, the function loop needs a final check after exiting the loop if we were successful. Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: Tobias Waldekranz <tobias@waldekranz.com> Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13Merge tag 'net-6.5-rc2' of ↵Linus Torvalds57-295/+531
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter, wireless and ebpf. Current release - regressions: - netfilter: conntrack: gre: don't set assured flag for clash entries - wifi: iwlwifi: remove 'use_tfh' config to fix crash Previous releases - regressions: - ipv6: fix a potential refcount underflow for idev - icmp6: ifix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev() - bpf: fix max stack depth check for async callbacks - eth: mlx5e: - check for NOT_READY flag state after locking - fix page_pool page fragment tracking for XDP - eth: igc: - fix tx hang issue when QBV gate is closed - fix corner cases for TSN offload - eth: octeontx2-af: Move validation of ptp pointer before its usage - eth: ena: fix shift-out-of-bounds in exponential backoff Previous releases - always broken: - core: prevent skb corruption on frag list segmentation - sched: - cls_fw: fix improper refcount update leads to use-after-free - sch_qfq: account for stab overhead in qfq_enqueue - netfilter: - report use refcount overflow - prevent OOB access in nft_byteorder_eval - wifi: mt7921e: fix init command fail with enabled device - eth: ocelot: fix oversize frame dropping for preemptible TCs - eth: fec: recycle pages for transmitted XDP frames" * tag 'net-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits) selftests: tc-testing: add test for qfq with stab overhead net/sched: sch_qfq: account for stab overhead in qfq_enqueue selftests: tc-testing: add tests for qfq mtu sanity check net/sched: sch_qfq: reintroduce lmax bound check for MTU wifi: cfg80211: fix receiving mesh packets without RFC1042 header wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set() net: txgbe: fix eeprom calculation error net/sched: make psched_mtu() RTNL-less safe net: ena: fix shift-out-of-bounds in exponential backoff netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write() net/sched: flower: Ensure both minimum and maximum ports are specified MAINTAINERS: Add another mailing list for QUALCOMM ETHQOS ETHERNET DRIVER docs: netdev: update the URL of the status page wifi: iwlwifi: remove 'use_tfh' config to fix crash xdp: use trusted arguments in XDP hints kfuncs bpf: cpumap: Fix memory leak in cpu_map_update_elem wifi: airo: avoid uninitialized warning in airo_get_rate() octeontx2-pf: Add additional check for MCAM rules net: dsa: Removed unneeded of_node_put in felix_parse_ports_node net: fec: use netdev_err_once() instead of netdev_err() ...
2023-07-12wifi: rtw89: debug: fix error code in rtw89_debug_priv_send_h2c_set()Zhang Shurong1-2/+3
If there is a failure during rtw89_fw_h2c_raw() rtw89_debug_priv_send_h2c should return negative error code instead of a positive value count. Fix this bug by returning correct error code. Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver") Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/tencent_AD09A61BC4DA92AD1EB0790F5C850E544D07@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-12net: txgbe: fix eeprom calculation errorJiawen Wu1-3/+0
For some device types like TXGBE_ID_XAUI, *checksum computed in txgbe_calc_eeprom_checksum() is larger than TXGBE_EEPROM_SUM. Remove the limit on the size of *checksum. Fixes: 049fe5365324 ("net: txgbe: Add operations to interact with firmware") Fixes: 5e2ea7801fac ("net: txgbe: Fix unsigned comparison to zero in txgbe_calc_eeprom_checksum()") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20230711063414.3311-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-12net: ena: fix shift-out-of-bounds in exponential backoffKrister Johansen1-0/+3
The ENA adapters on our instances occasionally reset. Once recently logged a UBSAN failure to console in the process: UBSAN: shift-out-of-bounds in build/linux/drivers/net/ethernet/amazon/ena/ena_com.c:540:13 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 28 PID: 70012 Comm: kworker/u72:2 Kdump: loaded not tainted 5.15.117 Hardware name: Amazon EC2 c5d.9xlarge/, BIOS 1.0 10/16/2017 Workqueue: ena ena_fw_reset_device [ena] Call Trace: <TASK> dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e ? __const_udelay+0x43/0x50 ena_delay_exponential_backoff_us.cold+0x16/0x1e [ena] wait_for_reset_state+0x54/0xa0 [ena] ena_com_dev_reset+0xc8/0x110 [ena] ena_down+0x3fe/0x480 [ena] ena_destroy_device+0xeb/0xf0 [ena] ena_fw_reset_device+0x30/0x50 [ena] process_one_work+0x22b/0x3d0 worker_thread+0x4d/0x3f0 ? process_one_work+0x3d0/0x3d0 kthread+0x12a/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Apparently, the reset delays are getting so large they can trigger a UBSAN panic. Looking at the code, the current timeout is capped at 5000us. Using a base value of 100us, the current code will overflow after (1<<29). Even at values before 32, this function wraps around, perhaps unintentionally. Cap the value of the exponent used for this backoff at (1<<16) which is larger than currently necessary, but large enough to support bigger values in the future. Cc: stable@vger.kernel.org Fixes: 4bb7f4cf60e3 ("net: ena: reduce driver load time") Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shay Agroskin <shayagr@amazon.com> Link: https://lore.kernel.org/r/20230711013621.GE1926@templeofstupid.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-12netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()Dan Carpenter1-6/+3
The simple_write_to_buffer() function is designed to handle partial writes. It returns negatives on error, otherwise it returns the number of bytes that were able to be copied. This code doesn't check the return properly. We only know that the first byte is written, the rest of the buffer might be uninitialized. There is no need to use the simple_write_to_buffer() function. Partial writes are prohibited by the "if (*ppos != 0)" check at the start of the function. Just use memdup_user() and copy the whole buffer. Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/7c1f950b-3a7d-4252-82a6-876e53078ef7@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-12Merge branch '1GbE' of ↵David S. Miller3-19/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== igc: Fix corner cases for TSN offload Florian Kauer says: The igc driver supports several different offloading capabilities relevant in the TSN context. Recent patches in this area introduced regressions for certain corner cases that are fixed in this series. Each of the patches (except the first one) addresses a different regression that can be separately reproduced. Still, they have overlapping code changes so they should not be separately applied. Especially #4 and #6 address the same observation, but both need to be applied to avoid TX hang occurrences in the scenario described in the patches. ==================== Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-11wifi: iwlwifi: remove 'use_tfh' config to fix crashJohannes Berg9-25/+18
This is equivalent to 'gen2', and it was always confusing to have two identical config entries. The split config patch actually had been originally developed after removing 'use_tfh" and didn't add the use_tfh in the new configs as they'd later been copied to the new files. Thus the easiest way to fix the init crash here now is to just remove use_tfh (which is erroneously unset in most of the configs now) and use 'gen2' in the code instead. There's possibly still an unwind error in iwl_txq_gen2_init() as it crashes if TXQ 0 fails to initialize, but we can deal with it later since the original failure is due to the use_tfh confusion. Tested-by: Xi Ruoyao <xry111@xry111.site> Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622 Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/ Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/ Fixes: 19898ce9cf8a ("wifi: iwlwifi: split 22000.c into multiple files") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-11wifi: airo: avoid uninitialized warning in airo_get_rate()Randy Dunlap1-1/+4
Quieten a gcc (11.3.0) build error or warning by checking the function call status and returning -EBUSY if the function call failed. This is similar to what several other wireless drivers do for the SIOCGIWRATE ioctl call when there is a locking problem. drivers/net/wireless/cisco/airo.c: error: 'status_rid.currentXmitRate' is used uninitialized [-Werror=uninitialized] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/39abf2c7-24a-f167-91da-ed4c5435d1c4@linux-m68k.org Link: https://lore.kernel.org/r/20230709133154.26206-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-11octeontx2-pf: Add additional check for MCAM rulesSuman Ghosh2-0/+23
Due to hardware limitation, MCAM drop rule with ether_type == 802.1Q and vlan_id == 0 is not supported. Hence rejecting such rules. Fixes: dce677da57c0 ("octeontx2-pf: Add vlan-etype to ntuple filters") Signed-off-by: Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20230710103027.2244139-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: dsa: Removed unneeded of_node_put in felix_parse_ports_nodeLu Hongfei1-1/+0
Remove unnecessary of_node_put from the continue path to prevent child node from being released twice, which could avoid resource leak or other unexpected issues. Signed-off-by: Lu Hongfei <luhongfei@vivo.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: de879a016a94 ("net: dsa: felix: add functionality when not all ports are supported") Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: fec: use netdev_err_once() instead of netdev_err()Wei Fang1-1/+1
In the case of heavy XDP traffic to be transmitted, the console will print the error log continuously if there are lack of enough BDs to accommodate the frames. The log looks like below. [ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG! Not only will this log be replicated and redundant, it will also degrade XDP performance. So we use netdev_err_once() instead of netdev_err() now. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: fec: increase the size of tx ring and update tx_wake_thresholdWei Fang2-3/+2
When the XDP feature is enabled and with heavy XDP frames to be transmitted, there is a considerable probability that available tx BDs are insufficient. This will lead to some XDP frames to be discarded and the "NOT enough BD for SG!" error log will appear in the console (as shown below). [ 160.013112] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.023116] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.028926] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.038946] fec 30be0000.ethernet eth0: NOT enough BD for SG! [ 160.044758] fec 30be0000.ethernet eth0: NOT enough BD for SG! In the case of heavy XDP traffic, sometimes the speed of recycling tx BDs may be slower than the speed of sending XDP frames. There may be several specific reasons, such as the interrupt is not responsed in time, the efficiency of the NAPI callback function is too low due to all the queues (tx queues and rx queues) share the same NAPI, and so on. After trying various methods, I think that increase the size of tx BD ring is simple and effective. Maybe the best resolution is that allocate NAPI for each queue to improve the efficiency of the NAPI callback, but this change is a bit big and I didn't try this method. Perheps this method will be implemented in a future patch. This patch also updates the tx_wake_threshold of tx ring which is related to the size of tx ring in the previous logic. Otherwise, the tx_wake_threshold will be too high (403 BDs), which is more likely to impact the slow path in the case of heavy XDP traffic, because XDP path and slow path share the tx BD rings. According to Jakub's suggestion, the tx_wake_threshold is at least equal to tx_stop_threshold + 2 * MAX_SKB_FRAGS, if a queue of hundreds of entries is overflowing, we should be able to apply a hysteresis of a few tens of entries. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: fec: recycle pages for transmitted XDP framesWei Fang2-48/+115
Once the XDP frames have been successfully transmitted through the ndo_xdp_xmit() interface, it's the driver responsibility to free the frames so that the page_pool can recycle the pages and reuse them. However, this action is not implemented in the fec driver. This leads to a user-visible problem that the console will print the following warning log. [ 157.568851] page_pool_release_retry() stalled pool shutdown 1389 inflight 60 sec [ 217.983446] page_pool_release_retry() stalled pool shutdown 1389 inflight 120 sec [ 278.399006] page_pool_release_retry() stalled pool shutdown 1389 inflight 181 sec [ 338.812885] page_pool_release_retry() stalled pool shutdown 1389 inflight 241 sec [ 399.226946] page_pool_release_retry() stalled pool shutdown 1389 inflight 302 sec Therefore, to solve this issue, we free XDP frames via xdp_return_frame() while cleaning the tx BD ring. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-11net: fec: dynamically set the NETDEV_XDP_ACT_NDO_XMIT feature of XDPWei Fang1-4/+9
When a XDP program is installed or uninstalled, fec_restart() will be invoked to reset MAC and buffer descriptor rings. It's reasonable not to transmit any packet during the process of reset. However, the NETDEV_XDP_ACT_NDO_XMIT bit of xdp_features is enabled by default, that is to say, it's possible that the fec_enet_xdp_xmit() will be invoked even if the process of reset is not finished. In this case, the redirected XDP frames might be dropped and available transmit BDs may be incorrectly deemed insufficient. So this patch disable the NETDEV_XDP_ACT_NDO_XMIT feature by default and dynamically configure this feature when the bpf program is installed or uninstalled. Fixes: e4ac7cc6e5a4 ("net: fec: turn on XDP features") Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-10igc: Fix inserting of empty frame for launchtimeFlorian Kauer1-1/+1
The insertion of an empty frame was introduced with commit db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") in order to ensure that the current cycle has at least one packet if there is some packet to be scheduled for the next cycle. However, the current implementation does not properly check if a packet is already scheduled for the current cycle. Currently, an empty packet is always inserted if and only if txtime >= end_of_cycle && txtime > last_tx_cycle but since last_tx_cycle is always either the end of the current cycle (end_of_cycle) or the end of a previous cycle, the second part (txtime > last_tx_cycle) is always true unless txtime == last_tx_cycle. What actually needs to be checked here is if the last_tx_cycle was already written within the current cycle, so an empty frame should only be inserted if and only if txtime >= end_of_cycle && end_of_cycle > last_tx_cycle. This patch does not only avoid an unnecessary insertion, but it can actually be harmful to insert an empty packet if packets are already scheduled in the current cycle, because it can lead to a situation where the empty packet is actually processed as the first packet in the upcoming cycle shifting the packet with the first_flag even one cycle into the future, finally leading to a TX hang. The TX hang can be reproduced on a i225 with: sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x1 \ txtime-delay 500000 \ clockid CLOCK_TAI sudo tc qdisc replace dev enp1s0 parent 100:1 etf \ clockid CLOCK_TAI \ delta 500000 \ offload \ skip_sock_check and traffic generator sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns with traffic.cfg #define ETH_P_IP 0x0800 { /* Ethernet Header */ 0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed 0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 48, 1, # IP Src - adapt as needed 10, 0, 48, 10, # IP Dest - adapt as needed const16(5555), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } and the observed message with that is for example igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang Tx Queue <0> TDH <32> TDT <3c> next_to_use <3c> next_to_clean <32> buffer_info[next_to_clean] time_stamp <ffff26a8> next_to_watch <00000000632a1828> jiffies <ffff27f8> desc.status <1048000> Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Fix launchtime before start of cycleFlorian Kauer1-1/+1
It is possible (verified on a running system) that frames are processed by igc_tx_launchtime with a txtime before the start of the cycle (baset_est). However, the result of txtime - baset_est is written into a u32, leading to a wrap around to a positive number. The following launchtime > 0 check will only branch to executing launchtime = 0 if launchtime is already 0. Fix it by using a s32 before checking launchtime > 0. Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: No strict mode in pure launchtime/CBS offloadFlorian Kauer1-2/+22
The flags IGC_TXQCTL_STRICT_CYCLE and IGC_TXQCTL_STRICT_END prevent the packet transmission over slot and cycle boundaries. This is important for taprio offload where the slots and cycles correspond to the slots and cycles configured for the network. However, the Qbv offload feature of the i225 is also used for enabling TX launchtime / ETF offload. In that case, however, the cycle has no meaning for the network and is only used internally to adapt the base time register after a second has passed. Enabling strict mode in this case would unnecessarily prevent the transmission of certain packets (i.e. at the boundary of a second) and thus interferes with the ETF qdisc that promises transmission at a certain point in time. Similar to ETF, this also applies to CBS offload that also should not be influenced by strict mode unless taprio offload would be enabled at the same time. This fully reverts commit d8f45be01dd9 ("igc: Use strict cycles for Qbv scheduling") but its commit message only describes what was already implemented before that commit. The difference to a plain revert of that commit is that it now copes with the base_time = 0 case that was fixed with commit e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") In particular, enabling strict mode leads to TX hang situations under high traffic if taprio is applied WITHOUT taprio offload but WITH ETF offload, e.g. as in sudo tc qdisc replace dev enp1s0 parent root handle 100 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x1 \ txtime-delay 500000 \ clockid CLOCK_TAI sudo tc qdisc replace dev enp1s0 parent 100:1 etf \ clockid CLOCK_TAI \ delta 500000 \ offload \ skip_sock_check and traffic generator sudo trafgen -i traffic.cfg -o enp1s0 --cpp -n0 -q -t1400ns with traffic.cfg #define ETH_P_IP 0x0800 { /* Ethernet Header */ 0x30, 0x1f, 0x9a, 0xd0, 0xf0, 0x0e, # MAC Dest - adapt as needed 0x24, 0x5e, 0xbe, 0x57, 0x2e, 0x36, # MAC Src - adapt as needed const16(ETH_P_IP), /* IPv4 Header */ 0b01000101, 0, # IPv4 version, IHL, TOS const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header)) const16(2), # IPv4 ident 0b01000000, 0, # IPv4 flags, fragmentation off 64, # IPv4 TTL 17, # Protocol UDP csumip(14, 33), # IPv4 checksum /* UDP Header */ 10, 0, 48, 1, # IP Src - adapt as needed 10, 0, 48, 10, # IP Dest - adapt as needed const16(5555), # UDP Src Port const16(6666), # UDP Dest Port const16(1008), # UDP length (UDP header 8 bytes + payload length) csumudp(14, 34), # UDP checksum /* Payload */ fill('W', 1000), } and the observed message with that is for example igc 0000:01:00.0 enp1s0: Detected Tx Unit Hang Tx Queue <0> TDH <d0> TDT <f0> next_to_use <f0> next_to_clean <d0> buffer_info[next_to_clean] time_stamp <ffff661f> next_to_watch <00000000245a4efb> jiffies <ffff6e48> desc.status <1048000> Fixes: d8f45be01dd9 ("igc: Use strict cycles for Qbv scheduling") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Handle already enabled taprio offload for basetime 0Florian Kauer1-1/+1
Since commit e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") it is possible to enable taprio offload with a basetime of 0. However, the check if taprio offload is already enabled (and thus -EALREADY should be returned for igc_save_qbv_schedule) still relied on adapter->base_time > 0. This can be reproduced as follows: # TAPRIO offload (flags == 0x2) and base-time = 0 sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x2 # The second call should fail with "Error: Device failed to setup taprio offload." # But that only happens if base-time was != 0 sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time 0 \ sched-entry S 01 300000 \ flags 0x2 Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Do not enable taprio offload for invalid argumentsFlorian Kauer1-12/+6
Only set adapter->taprio_offload_enable after validating the arguments. Otherwise, it stays set even if the offload was not enabled. Since the subsequent code does not get executed in case of invalid arguments, it will not be read at first. However, by activating and then deactivating another offload (e.g. ETF/TX launchtime offload), taprio_offload_enable is read and erroneously keeps the offload feature of the NIC enabled. This can be reproduced as follows: # TAPRIO offload (flags == 0x2) and negative base-time leading to expected -ERANGE sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \ num_tc 1 \ map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 \ base-time -1000 \ sched-entry S 01 300000 \ flags 0x2 # IGC_TQAVCTRL is 0x0 as expected (iomem=relaxed for reading register) sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 # Activate ETF offload sudo tc qdisc replace dev enp1s0 parent root handle 6666 mqprio \ num_tc 3 \ map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 2@2 \ hw 0 sudo tc qdisc add dev enp1s0 parent 6666:1 etf \ clockid CLOCK_TAI \ delta 500000 \ offload # IGC_TQAVCTRL is 0x9 as expected sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 # Deactivate ETF offload again sudo tc qdisc delete dev enp1s0 parent 6666:1 # IGC_TQAVCTRL should now be 0x0 again, but is observed as 0x9 sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1 Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-10igc: Rename qbv_enable to taprio_offload_enableFlorian Kauer3-5/+5
In the current implementation the flags adapter->qbv_enable and IGC_FLAG_TSN_QBV_ENABLED have a similar name, but do not have the same meaning. The first one is used only to indicate taprio offload (i.e. when igc_save_qbv_schedule was called), while the second one corresponds to the Qbv mode of the hardware. However, the second one is also used to support the TX launchtime feature, i.e. ETF qdisc offload. This leads to situations where adapter->qbv_enable is false, but the flag IGC_FLAG_TSN_QBV_ENABLED is set. This is prone to confusion. The rename should reduce this confusion. Since it is a pure rename, it has no impact on functionality. Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv") Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.