aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-07-03Merge tag 'leds-next-6.5' of ↵Linus Torvalds1-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "New Drivers: - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs - Add support for Awinic AW20036/AW20054/AW20072 LEDs New Device Support: - Add support for PMI632 LPG to QCom LPG - Add support for PMI8998 to QCom Flash - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC New Functionality: - Implement the LP55xx Charge Pump - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC - Enable per-pin resolution Pinctrl in LEDs GPIO Fix-ups: - Allow thread to sleep by switching from spinlock to mutex - Add lots of Device Tree bindings / support - Adapt relationships / dependencies driven by Kconfig - Switch I2C drivers from .probe_new() to .probe() - Remove superfluous / duplicate code - Replace strlcpy() with strscpy() for efficiency and overflow prevention - Staticify various functions - Trivial: Fixing coding style - Simplify / reduce code Bug Fixes: - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename - Repair race between led_set_brightness(LED_{OFF,FULL}) - Fix Oops relating to sleeping in critical sections - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger - Do not leak resources in error handling paths - Fix unsigned comparison which can never be negative - Provide missing NULL terminating entries in tables - Fix misnaming issues" * tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits) leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks leds: sgm3140: Add richtek,rt5033-led compatible dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks" dt-bindings: leds: Drop unneeded quotes leds: Fix config reference for AW200xx driver leds: leds-mt6323: Add support for WLEDs and MT6332 leds: leds-mt6323: Add support for MT6331 leds leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro leds: leds-mt6323: Drop MT6323_ prefix from macros and defines leds: leds-mt6323: Specify registers and specs in platform data dt-bindings: leds: leds-mt6323: Document mt6332 compatible dt-bindings: leds: leds-mt6323: Document mt6331 compatible leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches leds: simatic-ipc-leds-gpio: Split up into multiple drivers leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative leds: cht-wcove: Remove unneeded semicolon leds: cht-wcove: Fix an unsigned comparison which can never be negative ...
2023-06-30Merge tag 'pci-v6.5-changes' of ↵Linus Torvalds1-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Export pcie_retrain_link() for use outside ASPM - Add Data Link Layer Link Active Reporting as another way for pcie_retrain_link() to determine the link is up - Work around link training failures (especially on the ASMedia ASM2824 switch) by training first at 2.5GT/s and then attempting higher rates Resource management: - When we coalesce host bridge windows, remove invalidated resources from the resource tree so future allocations work correctly Hotplug: - Cancel bringup sequence if card is not present, to keep from blinking Power Indicator indefinitely - Reassign bridge resources if necessary for ACPI hotplug Driver binding: - Convert platform_device .remove() callbacks to return void instead of a mostly useless int Power management: - Reduce wait time for secondary bus to be ready to speed up resume - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold - Call _REG when transitioning D-states so AML that uses the PCI config space OpRegion works, which fixes some ASMedia GPIO controllers after resume Virtualization: - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang when guest is rebooted - Add function 1 DMA alias quirk for Marvell 88SE9235 Error handling: - Unexport pci_save_aer_state() since it's only used in drivers/pci/ - Drop recommendation for drivers to configure AER Capability, since the PCI core does this for all devices ASPM: - Disable ASPM on MFD function removal to avoid use-after-free - Tighten up pci_enable_link_state() and pci_disable_link_state() interfaces so they don't enable/disable states the driver didn't specify - Avoid link retraining race that can happen if ASPM sets link control parameters while the link is in the midst of training for some other reason Endpoint framework: - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different from "PCI Endpoint NTB driver" - Automatically create a function specific attributes group for endpoint drivers to avoid reference counting issues - Fix many EPC test issues - Return pci_epf_type_add_cfs() error if EPF has no driver - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI vector parameters - Pass EPF device ID to driver probe functions - Return -EALREADY if EPC has already been started/stopped - Add linkdown notifier support and use it in qcom-ep - Add Bus Master Enable event support and use it in qcom-ep - Add Qualcomm Modem Host Interface (MHI) endpoint driver - Add Layerscape PME interrupt handling to manage link-up notification Cadence PCIe controller driver: - Wait for link retrain to complete when working around the J721E i2085 erratum with Gen2 mode Faraday FTPC100 PCI controller driver: - Release clock resources on error paths Freescale i.MX6 PCIe controller driver: - Save and restore Root Port MSI control to work around hardware defect Intel VMD host bridge driver: - Reset VMD config register between soft reboots - Capture pci_reset_bus() return value instead of printing junk when it fails Qualcomm PCIe controller driver: - Add SDX65 endpoint compatible string to DT binding - Disable register write access after init for IP v2.3.3, v2.9.0 - Use DWC helpers for enabling/disabling writes to DBI registers - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2, v2.3.3, v2.7.0, v2.9.0 - Reuse v2.3.2 post-init sequence for v2.4.0 Renesas R-Car PCIe controller driver: - Remove unused static pcie_base and pcie_dev Rockchip PCIe controller driver: - Remove writes to unused registers - Write endpoint Device ID using correct register - Assert PCI Configuration Enable bit after probe so endpoint responds instead of generating Request Retry Status messages - Poll waiting for PHY PLLs to lock - Update RK3399 example DT binding to be valid - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of manually generating PCIe message - Use multiple windows to avoid address translation conflicts - Use u32 (not u16) when accessing 32-bit registers - Hide MSI-X Capability, since RK3399 can't generate MSI-X - Set endpoint controller required alignment to 256 Synopsys DesignWare PCIe controller driver: - Wait for link to come up only if we've initiated link training Miscellaneous: - Add pci_clear_master() stub for non-CONFIG_PCI" * tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) Documentation: PCI: correct spelling PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() PCI: xgene-msi: Convert to platform remove callback returning void PCI: tegra: Convert to platform remove callback returning void PCI: rockchip-host: Convert to platform remove callback returning void PCI: mvebu: Convert to platform remove callback returning void PCI: mt7621: Convert to platform remove callback returning void PCI: mediatek-gen3: Convert to platform remove callback returning void PCI: mediatek: Convert to platform remove callback returning void PCI: iproc: Convert to platform remove callback returning void PCI: hisi-error: Convert to platform remove callback returning void PCI: dwc: Convert to platform remove callback returning void PCI: j721e: Convert to platform remove callback returning void PCI: brcmstb: Convert to platform remove callback returning void PCI: altera-msi: Convert to platform remove callback returning void PCI: altera: Convert to platform remove callback returning void PCI: aardvark: Convert to platform remove callback returning void PCI: rcar: Use correct product family name for Renesas R-Car PCI: layerscape: Add the endpoint linkup notifier support PCI: endpoint: pci-epf-vntb: Fix typo in comments ...
2023-06-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-4/+7
Pull rdma updates from Jason Gunthorpe: "This cycle saw a focus on rxe and bnxt_re drivers: - Code cleanups for irdma, rxe, rtrs, hns, vmw_pvrdma - rxe uses workqueues instead of tasklets - rxe has better compliance around access checks for MRs and rereg_mr - mana supportst he 'v2' FW interface for RX coalescing - hfi1 bug fix for stale cache entries in its MR cache - mlx5 buf fix to handle FW failures when destroying QPs - erdma HW has a new doorbell allocation mechanism for uverbs that is secure - Lots of small cleanups and rework in bnxt_re: - Use the common mmap functions - Support disassociation - Improve FW command flow - support for 'low latency push'" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (71 commits) RDMA/bnxt_re: Fix an IS_ERR() vs NULL check RDMA/bnxt_re: Fix spelling mistake "priviledged" -> "privileged" RDMA/bnxt_re: Remove duplicated include in bnxt_re/main.c RDMA/bnxt_re: Refactor code around bnxt_qplib_map_rc() RDMA/bnxt_re: Remove incorrect return check from slow path RDMA/bnxt_re: Enable low latency push RDMA/bnxt_re: Reorg the bar mapping RDMA/bnxt_re: Move the interface version to chip context structure RDMA/bnxt_re: Query function capabilities from firmware RDMA/bnxt_re: Optimize the bnxt_re_init_hwrm_hdr usage RDMA/bnxt_re: Add disassociate ucontext support RDMA/bnxt_re: Use the common mmap helper functions RDMA/bnxt_re: Initialize opcode while sending message RDMA/cma: Remove NULL check before dev_{put, hold} RDMA/rxe: Simplify cq->notify code RDMA/rxe: Fixes mr access supported list RDMA/bnxt_re: optimize the parameters passed to helper functions RDMA/bnxt_re: remove redundant cmdq_bitmap RDMA/bnxt_re: use firmware provided max request timeout RDMA/bnxt_re: cancel all control path command waiters upon error ...
2023-06-29Merge tag 'soc-drivers-6.5' of ↵Linus Torvalds3-9/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Nothing surprising in the SoC specific drivers, with the usual updates: - Added or improved SoC driver support for Tegra234, Exynos4121, RK3588, as well as multiple Mediatek and Qualcomm chips - SCMI firmware gains support for multiple SMC/HVC transport and version 3.2 of the protocol - Cleanups amd minor changes for the reset controller, memory controller, firmware and sram drivers - Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm, amlogic and renesas SoC specific drivers" * tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits) dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding MAINTAINERS: add PHY-related files to Amlogic SoC file list drivers: meson: secure-pwrc: always enable DMA domain tee: optee: Use kmemdup() to replace kmalloc + memcpy soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer dt-bindings: sram: qcom,imem: document qdu1000 soc: qcom: icc-bwmon: Fix MSM8998 count unit dt-bindings: soc: qcom,rpmh-rsc: Require power-domains soc: qcom: socinfo: Add Soc ID for IPQ5300 dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300 soc: qcom: Fix a IS_ERR() vs NULL bug in probe soc: qcom: socinfo: Add support for new fields in revision 19 soc: qcom: socinfo: Add support for new fields in revision 18 dt-bindings: firmware: scm: Add compatible for SDX75 soc: qcom: mdt_loader: Fix split image detection dt-bindings: memory-controllers: drop unneeded quotes soc: rockchip: dtpm: use C99 array init syntax firmware: tegra: bpmp: Add support for DRAM MRQ GSCs soc/tegra: pmc: Use devm_clk_notifier_register() soc/tegra: pmc: Simplify debugfs initialization ...
2023-06-28Merge tag 'net-next-6.5' of ↵Linus Torvalds805-16576/+60480
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Jakub Kicinski: "WiFi 7 and sendpage changes are the biggest pieces of work for this release. The latter will definitely require fixes but I think that we got it to a reasonable point. Core: - Rework the sendpage & splice implementations Instead of feeding data into sockets page by page extend sendmsg handlers to support taking a reference on the data, controlled by a new flag called MSG_SPLICE_PAGES Rework the handling of unexpected-end-of-file to invoke an additional callback instead of trying to predict what the right combination of MORE/NOTLAST flags is Remove the MSG_SENDPAGE_NOTLAST flag completely - Implement SCM_PIDFD, a new type of CMSG type analogous to SCM_CREDENTIALS, but it contains pidfd instead of plain pid - Enable socket busy polling with CONFIG_RT - Improve reliability and efficiency of reporting for ref_tracker - Auto-generate a user space C library for various Netlink families Protocols: - Allow TCP to shrink the advertised window when necessary, prevent sk_rcvbuf auto-tuning from growing the window all the way up to tcp_rmem[2] - Use per-VMA locking for "page-flipping" TCP receive zerocopy - Prepare TCP for device-to-device data transfers, by making sure that payloads are always attached to skbs as page frags - Make the backoff time for the first N TCP SYN retransmissions linear. Exponential backoff is unnecessarily conservative - Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO) - Avoid waking up applications using TLS sockets until we have a full record - Allow using kernel memory for protocol ioctl callbacks, paving the way to issuing ioctls over io_uring - Add nolocalbypass option to VxLAN, forcing packets to be fully encapsulated even if they are destined for a local IP address - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure in-kernel ECMP implementation (e.g. Open vSwitch) select the same link for all packets. Support L4 symmetric hashing in Open vSwitch - PPPoE: make number of hash bits configurable - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client (ipconfig) - Add layer 2 miss indication and filtering, allowing higher layers (e.g. ACL filters) to make forwarding decisions based on whether packet matched forwarding state in lower devices (bridge) - Support matching on Connectivity Fault Management (CFM) packets - Hide the "link becomes ready" IPv6 messages by demoting their printk level to debug - HSR: don't enable promiscuous mode if device offloads the proto - Support active scanning in IEEE 802.15.4 - Continue work on Multi-Link Operation for WiFi 7 BPF: - Add precision propagation for subprogs and callbacks. This allows maintaining verification efficiency when subprograms are used, or in fact passing the verifier at all for complex programs, especially those using open-coded iterators - Improve BPF's {g,s}setsockopt() length handling. Previously BPF assumed the length is always equal to the amount of written data. But some protos allow passing a NULL buffer to discover what the output buffer *should* be, without writing anything - Accept dynptr memory as memory arguments passed to helpers - Add routing table ID to bpf_fib_lookup BPF helper - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark maps as read-only) - Show target_{obj,btf}_id in tracing link fdinfo - Addition of several new kfuncs (most of the names are self-explanatory): - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(), bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size() and bpf_dynptr_clone(). - bpf_task_under_cgroup() - bpf_sock_destroy() - force closing sockets - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs Netfilter: - Relax set/map validation checks in nf_tables. Allow checking presence of an entry in a map without using the value - Increase ip_vs_conn_tab_bits range for 64BIT builds - Allow updating size of a set - Improve NAT tuple selection when connection is closing Driver API: - Integrate netdev with LED subsystem, to allow configuring HW "offloaded" blinking of LEDs based on link state and activity (i.e. packets coming in and out) - Support configuring rate selection pins of SFP modules - Factor Clause 73 auto-negotiation code out of the drivers, provide common helper routines - Add more fool-proof helpers for managing lifetime of MDIO devices associated with the PCS layer - Allow drivers to report advanced statistics related to Time Aware scheduler offload (taprio) - Allow opting out of VF statistics in link dump, to allow more VFs to fit into the message - Split devlink instance and devlink port operations New hardware / drivers: - Ethernet: - Synopsys EMAC4 IP support (stmmac) - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches - Marvell 88E6250 7 port switches - Microchip LAN8650/1 Rev.B0 PHYs - MediaTek MT7981/MT7988 built-in 1GE PHY driver - WiFi: - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps - Realtek RTL8723DS (SDIO variant) - Realtek RTL8851BE - CAN: - Fintek F81604 Drivers: - Ethernet NICs: - Intel (100G, ice): - support dynamic interrupt allocation - use meta data match instead of VF MAC addr on slow-path - nVidia/Mellanox: - extend link aggregation to handle 4, rather than just 2 ports - spawn sub-functions without any features by default - OcteonTX2: - support HTB (Tx scheduling/QoS) offload - make RSS hash generation configurable - support selecting Rx queue using TC filters - Wangxun (ngbe/txgbe): - add basic Tx/Rx packet offloads - add phylink support (SFP/PCS control) - Freescale/NXP (enetc): - report TAPRIO packet statistics - Solarflare/AMD: - support matching on IP ToS and UDP source port of outer header - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6 - add devlink dev info support for EF10 - Virtual NICs: - Microsoft vNIC: - size the Rx indirection table based on requested configuration - support VLAN tagging - Amazon vNIC: - try to reuse Rx buffers if not fully consumed, useful for ARM servers running with 16kB pages - Google vNIC: - support TCP segmentation of >64kB frames - Ethernet embedded switches: - Marvell (mv88e6xxx): - enable USXGMII (88E6191X) - Microchip: - lan966x: add support for Egress Stage 0 ACL engine - lan966x: support mapping packet priority to internal switch priority (based on PCP or DSCP) - Ethernet PHYs: - Broadcom PHYs: - support for Wake-on-LAN for BCM54210E/B50212E - report LPI counter - Microsemi PHYs: support RGMII delay configuration (VSC85xx) - Micrel PHYs: receive timestamp in the frame (LAN8841) - Realtek PHYs: support optional external PHY clock - Altera TSE PCS: merge the driver into Lynx PCS which it is a variant of - CAN: Kvaser PCIEcan: - support packet timestamping - WiFi: - Intel (iwlwifi): - major update for new firmware and Multi-Link Operation (MLO) - configuration rework to drop test devices and split the different families - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature - Qualcomm 802.11ax (ath11k): - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode - support factory test mode - RealTek (rtw89): - add RSSI based antenna diversity - support U-NII-4 channels on 5 GHz band - RealTek (rtl8xxxu): - AP mode support for 8188f - support USB RX aggregation for the newer chips" * tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits) net: scm: introduce and use scm_recv_unix helper af_unix: Skip SCM_PIDFD if scm->pid is NULL. net: lan743x: Simplify comparison netlink: Add __sock_i_ino() for __netlink_diag_dump(). net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses Revert "af_unix: Call scm_recv() only after scm_set_cred()." phylink: ReST-ify the phylink_pcs_neg_mode() kdoc libceph: Partially revert changes to support MSG_SPLICE_PAGES net: phy: mscc: fix packet loss due to RGMII delays net: mana: use vmalloc_array and vcalloc net: enetc: use vmalloc_array and vcalloc ionic: use vmalloc_array and vcalloc pds_core: use vmalloc_array and vcalloc gve: use vmalloc_array and vcalloc octeon_ep: use vmalloc_array and vcalloc net: usb: qmi_wwan: add u-blox 0x1312 composition perf trace: fix MSG_SPLICE_PAGES build error ipvlan: Fix return value of ipvlan_queue_xmit() netfilter: nf_tables: fix underflow in chain reference counter netfilter: nf_tables: unbind non-anonymous set if rule construction fails ...
2023-06-27Merge tag 'hardening-v6.5-rc1' of ↵Linus Torvalds1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "There are three areas of note: A bunch of strlcpy()->strscpy() conversions ended up living in my tree since they were either Acked by maintainers for me to carry, or got ignored for multiple weeks (and were trivial changes). The compiler option '-fstrict-flex-arrays=3' has been enabled globally, and has been in -next for the entire devel cycle. This changes compiler diagnostics (though mainly just -Warray-bounds which is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_ coverage. In other words, there are no new restrictions, just potentially new warnings. Any new FORTIFY warnings we've seen have been fixed (usually in their respective subsystem trees). For more details, see commit df8fc4e934c12b. The under-development compiler attribute __counted_by has been added so that we can start annotating flexible array members with their associated structure member that tracks the count of flexible array elements at run-time. It is possible (likely?) that the exact syntax of the attribute will change before it is finalized, but GCC and Clang are working together to sort it out. Any changes can be made to the macro while we continue to add annotations. As an example of that last case, I have a treewide commit waiting with such annotations found via Coccinelle: https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b Also see commit dd06e72e68bcb4 for more details. Summary: - Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko) - Convert strreplace() to return string start (Andy Shevchenko) - Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook) - Add missing function prototypes seen with W=1 (Arnd Bergmann) - Fix strscpy() kerndoc typo (Arne Welzel) - Replace strlcpy() with strscpy() across many subsystems which were either Acked by respective maintainers or were trivial changes that went ignored for multiple weeks (Azeem Shaikh) - Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers) - Add KUnit tests for strcat()-family - Enable KUnit tests of FORTIFY wrappers under UML - Add more complete FORTIFY protections for strlcat() - Add missed disabling of FORTIFY for all arch purgatories. - Enable -fstrict-flex-arrays=3 globally - Tightening UBSAN_BOUNDS when using GCC - Improve checkpatch to check for strcpy, strncpy, and fake flex arrays - Improve use of const variables in FORTIFY - Add requested struct_size_t() helper for types not pointers - Add __counted_by macro for annotating flexible array size members" * tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits) netfilter: ipset: Replace strlcpy with strscpy uml: Replace strlcpy with strscpy um: Use HOST_DIR for mrproper kallsyms: Replace all non-returning strlcpy with strscpy sh: Replace all non-returning strlcpy with strscpy of/flattree: Replace all non-returning strlcpy with strscpy sparc64: Replace all non-returning strlcpy with strscpy Hexagon: Replace all non-returning strlcpy with strscpy kobject: Use return value of strreplace() lib/string_helpers: Change returned value of the strreplace() jbd2: Avoid printing outside the boundary of the buffer checkpatch: Check for 0-length and 1-element arrays riscv/purgatory: Do not use fortified string functions s390/purgatory: Do not use fortified string functions x86/purgatory: Do not use fortified string functions acpi: Replace struct acpi_table_slit 1-element array with flex-array clocksource: Replace all non-returning strlcpy with strscpy string: use __builtin_memcpy() in strlcpy/strlcat staging: most: Replace all non-returning strlcpy with strscpy drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy ...
2023-06-27Merge tag 'wq-for-6.5-cleanup-ordered' of ↵Linus Torvalds12-37/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull ordered workqueue creation updates from Tejun Heo: "For historical reasons, unbound workqueues with max concurrency limit of 1 are considered ordered, even though the concurrency limit hasn't been system-wide for a long time. This creates ambiguity around whether ordered execution is actually required for correctness, which was actually confusing for e.g. btrfs (btrfs updates are being routed through the btrfs tree). There aren't that many users in the tree which use the combination and there are pending improvements to unbound workqueue affinity handling which will make inadvertent use of ordered workqueue a bigger loss. This clarifies the situation for most of them by updating the ones which require ordered execution to use alloc_ordered_workqueue(). There are some conversions being routed through subsystem-specific trees and likely a few stragglers. Once they're all converted, workqueue can trigger a warning on unbound + @max_active==1 usages and eventually drop the implicit ordered behavior" * tag 'wq-for-6.5-cleanup-ordered' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: rxrpc: Use alloc_ordered_workqueue() to create ordered workqueues net: qrtr: Use alloc_ordered_workqueue() to create ordered workqueues net: wwan: t7xx: Use alloc_ordered_workqueue() to create ordered workqueues dm integrity: Use alloc_ordered_workqueue() to create ordered workqueues media: amphion: Use alloc_ordered_workqueue() to create ordered workqueues scsi: NCR5380: Use default @max_active for hostdata->work_q media: coda: Use alloc_ordered_workqueue() to create ordered workqueues crypto: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues wifi: mwifiex: Use default @max_active for workqueues wifi: iwlwifi: Use default @max_active for trans_pcie->rba.alloc_wq xen/pvcalls: Use alloc_ordered_workqueue() to create ordered workqueues virt: acrn: Use alloc_ordered_workqueue() to create ordered workqueues net: octeontx2: Use alloc_ordered_workqueue() to create ordered workqueues net: thunderx: Use alloc_ordered_workqueue() to create ordered workqueues greybus: Use alloc_ordered_workqueue() to create ordered workqueues powerpc, workqueue: Use alloc_ordered_workqueue() to create ordered workqueues
2023-06-27Merge tag 'soc-fsl-next-v6.5' of ↵Arnd Bergmann3-9/+3
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into soc/drivers NXP/FSL SoC driver updates for v6.5 - fsl-mc: Make remove function return void - QE USB: fix build issue caused by missing dependency * tag 'soc-fsl-next-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: bus: fsl-mc: fsl-mc-allocator: Drop a write-only variable bus: fsl-mc: fsl-mc-allocator: Initialize mc_bus_dev before use soc/fsl/qe: fix usb.c build errors bus: fsl-mc: Make remove function return void soc: fsl: dpio: Suppress duplicated error reporting on device remove bus: fsl-mc: fsl-mc-allocator: Improve error reporting bus: fsl-mc: fsl-mc-allocator: Drop if block with always wrong condition bus: fsl-mc: dprc: Push down error message from fsl_mc_driver_remove() bus: fsl-mc: Only warn once about errors on device unbind Link: https://lore.kernel.org/r/20230621222503.12402-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-06-27Merge tag 'v6.4' into rdma.git for-nextJason Gunthorpe214-1019/+1920
Linux 6.4 Resolve conflicts between rdma rc and next in rxe_cq matching linux-next: drivers/infiniband/sw/rxe/rxe_cq.c: https://lore.kernel.org/r/20230622115246.365d30ad@canb.auug.org.au Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-06-27net: lan743x: Simplify comparisonMoritz Fischer1-1/+1
Simplify comparison, no functional changes. Cc: Bryan Whitehead <bryan.whitehead@microchip.com> Cc: UNGLinuxDriver@microchip.com Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Moritz Fischer <moritzf@google.com> Link: https://lore.kernel.org/r/20230627035432.1296760-1-moritzf@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski12-83/+149
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27net: phy: mscc: fix packet loss due to RGMII delaysVladimir Oltean1-2/+2
Two deadly typos break RX and TX traffic on the VSC8502 PHY using RGMII if phy-mode = "rgmii-id" or "rgmii-txid", and no "tx-internal-delay-ps" override exists. The negative error code from phy_get_internal_delay() does not get overridden with the delay deduced from the phy-mode, and later gets committed to hardware. Also, the rx_delay gets overridden by what should have been the tx_delay. Fixes: dbb050d2bfc8 ("phy: mscc: Add support for RGMII delay configuration") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Harini Katakam <harini.katakam@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230627134235.3453358-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27net: mana: use vmalloc_array and vcallocJulia Lawall1-1/+1
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-23-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27net: enetc: use vmalloc_array and vcallocJulia Lawall1-2/+2
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-19-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27ionic: use vmalloc_array and vcallocJulia Lawall1-2/+2
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-12-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27pds_core: use vmalloc_array and vcallocJulia Lawall1-2/+2
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-10-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27gve: use vmalloc_array and vcallocJulia Lawall1-1/+1
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-5-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27octeon_ep: use vmalloc_array and vcallocJulia Lawall1-1/+1
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230627144339.144478-3-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-27net: usb: qmi_wwan: add u-blox 0x1312 compositionDavide Tronchin1-0/+1
Add RmNet support for LARA-R6 01B. The new LARA-R6 product variant identified by the "01B" string can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial interface and 1 CDC-ECM virtual network interface The first 4 interfaces of all the 3 configurations (default, RmNet, ECM) are the same. In RmNet mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com> Link: https://lore.kernel.org/r/20230626125336.3127-1-davide.tronchin.94@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-27ipvlan: Fix return value of ipvlan_queue_xmit()Cambda Zhu1-3/+6
ipvlan_queue_xmit() should return NET_XMIT_XXX, but ipvlan_xmit_mode_l2/l3() returns rx_handler_result_t or NET_RX_XXX in some cases. ipvlan_rcv_frame() will only return RX_HANDLER_CONSUMED in ipvlan_xmit_mode_l2/l3() because 'local' is true. It's equal to NET_XMIT_SUCCESS. But dev_forward_skb() can return NET_RX_SUCCESS or NET_RX_DROP, and returning NET_RX_DROP(NET_XMIT_DROP) will increase both ipvlan and ipvlan->phy_dev drops counter. The skb to forward can be treated as xmitted successfully. This patch makes ipvlan_queue_xmit() return NET_XMIT_SUCCESS for forward skb. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Link: https://lore.kernel.org/r/20230626093347.7492-1-cambda@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-26Merge tag 'thermal-6.5-rc1' of ↵Linus Torvalds1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These extend the int340x thermal driver, add thermal DT bindings for some Qcom platforms, add DT bindings and support for Armada AP807 and MSM8909, allow selecting the bang-bang thermal governor as the default one, address issues in several thermal drivers for ARM platforms and clean up code. Specifics: - Add new IOCTLs to the int340x thermal driver to allow user space to retrieve the Passive v2 thermal table (Srinivas Pandruvada) - Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad Dybcio) - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki) - Add DT bindings for QCom ipq9574 (Praveenkumar I) - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren) - Allow selecting the bang-bang governor as default (Thierry Reding) - Refactor and prepare the code to set the scene for RCar Gen4 (Wolfram Sang) - Clean up and fix the QCom tsens drivers. Add DT bindings and calibration for the MSM8909 platform (Stephan Gerhold) - Revert a patch introducing a wrong usage of devm_of_iomap() on the Mediatek platform (Ricardo Cañuelo) - Fix the clock vs reset ordering in order to conform to the documentation on the sun8i (Christophe JAILLET) - Prevent setting up undocumented registers, enable the only described sensors and add the version 2.1 on the Qoriq sensor (Peng Fan) - Add DT bindings and support for the Armada AP807 (Alex Leibovich) - Update the mlx5 driver with the recent thermal changes (Daniel Lezcano) - Convert to platform remove callback returning void on STM32 (Uwe Kleine-König) - Add an error information printing for devm_thermal_add_hwmon_sysfs() and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra, Qoriq, Mediateka and QCom (Yangtao Li) - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai) - Use the dev_err_probe() function in the QCom tsens alarm driver (Luca Weiss)" * tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits) thermal/drivers/qcom/temp-alarm: Use dev_err_probe thermal/drivers/generic-adc: Register thermal zones as hwmon sensors thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start() thermal/drivers/qcom: Remove redundant msg at probe time thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor() thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone() thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel() drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe() thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe() thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe() thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register() thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs() thermal/drivers/stm32: Convert to platform remove callback returning void net/mlx5: Update the driver with the recent thermal changes thermal/drivers/armada: Add support for AP807 thermal data dt-bindings: armada-thermal: Add armada-ap807-thermal compatible thermal/drivers/qoriq: Support version 2.1 thermal/drivers/qoriq: Only enable supported sensors thermal/drivers/qoriq: No need to program site adjustment register thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors ...
2023-06-26net/mlx5: Update the driver with the recent thermal changesDaniel Lezcano1-7/+8
The thermal framework is migrating to the generic trip points. The set of changes also implies a self-encapsulation of the thermal zone device structure where the internals are no longer directly accessible but with accessors. Use the new API instead, so the next changes can be pushed in the thermal framework without this driver failing to compile. No functional changes intended. Cc: Sandipan Patra <spatra@nvidia.com> Cc: Gal Pressman <gal@nvidia.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230525140135.3589917-2-daniel.lezcano@linaro.org
2023-06-26sfc: falcon: use padding to fix alignment in loopback testEdward Cree1-19/+28
Add two bytes of padding to the start of struct ef4_loopback_payload, which are not sent on the wire. This ensures the 'ip' member is 4-byte aligned, preventing the following W=1 warning: net/ethernet/sfc/falcon/selftest.c:43:15: error: field ip within 'struct ef4_loopback_payload' is less aligned than 'struct iphdr' and is usually due to 'struct ef4_loopback_payload' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] struct iphdr ip; Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-26sfc: siena: use padding to fix alignment in loopback testEdward Cree1-19/+28
Add two bytes of padding to the start of struct efx_loopback_payload, which are not sent on the wire. This ensures the 'ip' member is 4-byte aligned, preventing the following W=1 warning: net/ethernet/sfc/siena/selftest.c:46:15: error: field ip within 'struct efx_loopback_payload' is less aligned than 'struct iphdr' and is usually due to 'struct efx_loopback_payload' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] struct iphdr ip; Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-26sfc: use padding to fix alignment in loopback testEdward Cree1-19/+28
Add two bytes of padding to the start of struct efx_loopback_payload, which are not sent on the wire. This ensures the 'ip' member is 4-byte aligned, preventing the following W=1 warning: net/ethernet/sfc/selftest.c:46:15: error: field ip within 'struct efx_loopback_payload' is less aligned than 'struct iphdr' and is usually due to 'struct efx_loopback_payload' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] struct iphdr ip; Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-26sfc: fix crash when reading stats while NIC is resettingEdward Cree1-3/+10
efx_net_stats() (.ndo_get_stats64) can be called during an ethtool selftest, during which time nic_data->mc_stats is NULL as the NIC has been fini'd. In this case do not attempt to fetch the latest stats from the hardware, else we will crash on a NULL dereference: BUG: kernel NULL pointer dereference, address: 0000000000000038 RIP efx_nic_update_stats abridged calltrace: efx_ef10_update_stats_pf efx_net_stats dev_get_stats dev_seq_printf_stats Skipping the read is safe, we will simply give out stale stats. To ensure that the free in efx_ef10_fini_nic() does not race against efx_ef10_update_stats_pf(), which could cause a TOCTTOU bug, take the efx->stats_lock in fini_nic (it is already held across update_stats). Fixes: d3142c193dca ("sfc: refactor EF10 stats handling") Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-24sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES)David Howells3-17/+0
Remove ->sendpage() and ->sendpage_locked(). sendmsg() with MSG_SPLICE_PAGES should be used instead. This allows multiple pages and multipage folios to be passed through. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> cc: linux-afs@lists.infradead.org cc: mptcp@lists.linux.dev cc: rds-devel@oss.oracle.com cc: tipc-discussion@lists.sourceforge.net cc: virtualization@lists.linux-foundation.org Link: https://lore.kernel.org/r/20230623225513.2732256-16-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24Merge tag 'mlx5-updates-2023-06-21' of ↵Jakub Kicinski8-56/+70
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-06-21 mlx5 driver minor cleanup and fixes to net-next * tag 'mlx5-updates-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Remove pointless vport lookup from mlx5_esw_check_port_type() net/mlx5: Remove redundant check from mlx5_esw_query_vport_vhca_id() net/mlx5: Remove redundant is_mdev_switchdev_mode() check from is_ib_rep_supported() net/mlx5: Remove redundant MLX5_ESWITCH_MANAGER() check from is_ib_rep_supported() net/mlx5e: E-Switch, Fix shared fdb error flow net/mlx5e: Remove redundant comment net/mlx5e: E-Switch, Pass other_vport flag if vport is not 0 net/mlx5e: E-Switch, Use xarray for devcom paired device index net/mlx5e: E-Switch, Add peer fdb miss rules for vport manager or ecpf net/mlx5e: Use vhca_id for device index in vport rx rules net/mlx5: Lag, Remove duplicate code checking lag is supported net/mlx5: Fix error code in mlx5_is_reset_now_capable() net/mlx5: Fix reserved at offset in hca_cap register net/mlx5: Fix SFs kernel documentation error net/mlx5: Fix UAF in mlx5_eswitch_cleanup() ==================== Link: https://lore.kernel.org/r/20230623192907.39033-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24Merge tag 'ieee802154-for-net-next-2023-06-23' of ↵Jakub Kicinski1-2/+2
gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next Miquel Raynal says: ==================== Core WPAN changes: - Support for active scans - Support for answering BEACON_REQ - Specific MLME handling for limited devices WPAN driver changes: - ca8210: - Flag the devices as limited - Remove stray gpiod_unexport() call * tag 'ieee802154-for-net-next-2023-06-23' of gitolite.kernel.org:pub/scm/linux/kernel/git/wpan/wpan-next: ieee802154: ca8210: Remove stray gpiod_unexport() call ieee802154: ca8210: Flag the driver as being limited net: ieee802154: Handle limited devices with only datagram support mac802154: Handle received BEACON_REQ ieee802154: Add support for allowing to answer BEACON_REQ mac802154: Handle active scanning ieee802154: Add support for user active scan requests ==================== Link: https://lore.kernel.org/r/20230623195506.40b87b5f@xps-13 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: axienet: Move reset before 64-bit DMA detectionMaxim Kochetkov1-5/+5
64-bit DMA detection will fail if axienet was started before (by boot loader, boot ROM, etc). In this state axienet will not start properly. XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect 64-bit DMA capability here. But datasheet says: When DMACR.RS is 1 (axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and is used to fetch the first descriptor. So iowrite32()/ioread32() trick to this register to detect 64-bit DMA will not work. So move axienet reset before 64-bit DMA detection. Fixes: f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20230622192245.116864-1-fido_max@inbox.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: dwmac-qcom-ethqos: use devm_stmmac_pltfr_probe()Bartosz Golaszewski1-2/+1
Use the devres variant of stmmac_pltfr_probe() and finally drop the remove() callback entirely. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-12-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: platform: provide devm_stmmac_pltfr_probe()Bartosz Golaszewski2-0/+33
Provide a devres variant of stmmac_pltfr_probe() which allows users to skip calling stmmac_pltfr_remove() at driver detach. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-11-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: dwmac-qco-ethqos: use devm_stmmac_probe_config_dt()Bartosz Golaszewski1-34/+15
Significantly simplify the driver's probe() function by using the devres variant of stmmac_probe_config_dt(). This allows to drop the goto jumps entirely. The remove_new() callback now needs to be switched to stmmac_pltfr_remove_no_dt(). Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-10-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: platform: provide devm_stmmac_probe_config_dt()Bartosz Golaszewski2-0/+43
Provide a devres variant of stmmac_probe_config_dt() that allows users to skip calling stmmac_remove_config_dt() at driver detach. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-9-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: platform: provide stmmac_pltfr_remove_no_dt()Bartosz Golaszewski2-2/+19
Add a variant of stmmac_pltfr_remove() that only frees resources allocated by stmmac_pltfr_probe() and - unlike stmmac_pltfr_remove() - does not call stmmac_remove_config_dt(). Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-8-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: dwmac-generic: use stmmac_pltfr_probe()Bartosz Golaszewski1-8/+1
Shrink the code and remove labels by using the new stmmac_pltfr_probe() function. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-7-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: platform: provide stmmac_pltfr_probe()Bartosz Golaszewski2-0/+31
Implement stmmac_pltfr_probe() which is the logical API counterpart for stmmac_pltfr_remove(). It calls the platform's init() callback and then probes the stmmac device. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-6-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: dwmac-generic: use stmmac_pltfr_exit()Bartosz Golaszewski1-2/+1
Shrink the code in dwmac-generic by using the new stmmac_pltfr_exit() helper. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-5-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: platform: provide stmmac_pltfr_exit()Bartosz Golaszewski2-6/+18
Provide a helper wrapper around calling the platform's exit() callback. This allows users to skip checking if the callback exists. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-4-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: dwmac-generic: use stmmac_pltfr_init()Bartosz Golaszewski1-5/+3
Shrink the code in dwmac-generic by using the new stmmac_pltfr_init() helper. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-3-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: stmmac: platform: provide stmmac_pltfr_init()Bartosz Golaszewski2-2/+26
Provide a helper wrapper around calling the platform's init() callback. This allows users to skip checking if the callback exists. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20230623100417.93592-2-brgl@bgdev.pl Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24Merge branch '100GbE' of ↵Jakub Kicinski9-108/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-22 (ice) This series contains updates to ice driver only. Jake adds a slight wait on control queue send to reduce wait time for responses that occur within normal times. Maciej allows for hot-swapping XDP programs. Przemek removes unnecessary checks when enabling SR-IOV and freeing allocated memory. Christophe Jaillet converts a managed memory allocation to a regular one. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: use ice_down_up() where applicable ice: Remove managed memory usage in ice_get_fw_log_cfg() ice: remove null checks before devm_kfree() calls ice: clean up freeing SR-IOV VFs ice: allow hot-swapping XDP programs ice: reduce initial wait for control queue messages ==================== Link: https://lore.kernel.org/r/20230622183601.2406499-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24gtp: Fix use-after-free in __gtp_encap_destroy().Kuniyuki Iwashima1-0/+2
syzkaller reported use-after-free in __gtp_encap_destroy(). [0] It shows the same process freed sk and touched it illegally. Commit e198987e7dd7 ("gtp: fix suspicious RCU usage") added lock_sock() and release_sock() in __gtp_encap_destroy() to protect sk->sk_user_data, but release_sock() is called after sock_put() releases the last refcnt. [0]: BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:96 [inline] BUG: KASAN: slab-use-after-free in atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline] BUG: KASAN: slab-use-after-free in queued_spin_lock include/asm-generic/qspinlock.h:111 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock include/linux/spinlock.h:186 [inline] BUG: KASAN: slab-use-after-free in __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline] BUG: KASAN: slab-use-after-free in _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178 Write of size 4 at addr ffff88800dbef398 by task syz-executor.2/2401 CPU: 1 PID: 2401 Comm: syz-executor.2 Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x72/0xa0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:351 [inline] print_report+0xcc/0x620 mm/kasan/report.c:462 kasan_report+0xb2/0xe0 mm/kasan/report.c:572 check_region_inline mm/kasan/generic.c:181 [inline] kasan_check_range+0x39/0x1c0 mm/kasan/generic.c:187 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:541 [inline] queued_spin_lock include/asm-generic/qspinlock.h:111 [inline] do_raw_spin_lock include/linux/spinlock.h:186 [inline] __raw_spin_lock_bh include/linux/spinlock_api_smp.h:127 [inline] _raw_spin_lock_bh+0x75/0xe0 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:355 [inline] release_sock+0x1f/0x1a0 net/core/sock.c:3526 gtp_encap_disable_sock drivers/net/gtp.c:651 [inline] gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664 gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728 unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841 rtnl_delete_link net/core/rtnetlink.c:3216 [inline] rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268 rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423 netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x1b7/0x200 net/socket.c:747 ____sys_sendmsg+0x75a/0x990 net/socket.c:2493 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547 __sys_sendmsg+0xfe/0x1d0 net/socket.c:2576 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f1168b1fe5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f1167edccc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f1168b1fe5d RDX: 0000000000000000 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f1168b80530 R15: 0000000000000000 </TASK> Allocated by task 1483: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x59/0x70 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:186 [inline] slab_post_alloc_hook mm/slab.h:711 [inline] slab_alloc_node mm/slub.c:3451 [inline] slab_alloc mm/slub.c:3459 [inline] __kmem_cache_alloc_lru mm/slub.c:3466 [inline] kmem_cache_alloc+0x16d/0x340 mm/slub.c:3475 sk_prot_alloc+0x5f/0x280 net/core/sock.c:2073 sk_alloc+0x34/0x6c0 net/core/sock.c:2132 inet6_create net/ipv6/af_inet6.c:192 [inline] inet6_create+0x2c7/0xf20 net/ipv6/af_inet6.c:119 __sock_create+0x2a1/0x530 net/socket.c:1535 sock_create net/socket.c:1586 [inline] __sys_socket_create net/socket.c:1623 [inline] __sys_socket_create net/socket.c:1608 [inline] __sys_socket+0x137/0x250 net/socket.c:1651 __do_sys_socket net/socket.c:1664 [inline] __se_sys_socket net/socket.c:1662 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1662 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 2401: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:521 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free mm/kasan/common.c:200 [inline] __kasan_slab_free+0x10c/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:162 [inline] slab_free_hook mm/slub.c:1781 [inline] slab_free_freelist_hook mm/slub.c:1807 [inline] slab_free mm/slub.c:3786 [inline] kmem_cache_free+0xb4/0x490 mm/slub.c:3808 sk_prot_free net/core/sock.c:2113 [inline] __sk_destruct+0x500/0x720 net/core/sock.c:2207 sk_destruct+0xc1/0xe0 net/core/sock.c:2222 __sk_free+0xed/0x3d0 net/core/sock.c:2233 sk_free+0x7c/0xa0 net/core/sock.c:2244 sock_put include/net/sock.h:1981 [inline] __gtp_encap_destroy+0x165/0x1b0 drivers/net/gtp.c:634 gtp_encap_disable_sock drivers/net/gtp.c:651 [inline] gtp_encap_disable+0xb9/0x220 drivers/net/gtp.c:664 gtp_dev_uninit+0x19/0x50 drivers/net/gtp.c:728 unregister_netdevice_many_notify+0x97e/0x1520 net/core/dev.c:10841 rtnl_delete_link net/core/rtnetlink.c:3216 [inline] rtnl_dellink+0x3c0/0xb30 net/core/rtnetlink.c:3268 rtnetlink_rcv_msg+0x450/0xb10 net/core/rtnetlink.c:6423 netlink_rcv_skb+0x15d/0x450 net/netlink/af_netlink.c:2548 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x700/0x930 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x91c/0xe30 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x1b7/0x200 net/socket.c:747 ____sys_sendmsg+0x75a/0x990 net/socket.c:2493 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2547 __sys_sendmsg+0xfe/0x1d0 net/socket.c:2576 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc The buggy address belongs to the object at ffff88800dbef300 which belongs to the cache UDPv6 of size 1344 The buggy address is located 152 bytes inside of freed 1344-byte region [ffff88800dbef300, ffff88800dbef840) The buggy address belongs to the physical page: page:00000000d31bfed5 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800dbeed40 pfn:0xdbe8 head:00000000d31bfed5 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:ffff888008ee0801 flags: 0x100000000010200(slab|head|node=0|zone=1) page_type: 0xffffffff() raw: 0100000000010200 ffff88800c7a3000 dead000000000122 0000000000000000 raw: ffff88800dbeed40 0000000080160015 00000001ffffffff ffff888008ee0801 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800dbef280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800dbef300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88800dbef380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88800dbef400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800dbef480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/r/20230622213231.24651-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24Merge branch '40GbE' of ↵Jakub Kicinski8-142/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-22 (iavf) This series contains updates to iavf driver only. Przemek defers removing, previous, primary MAC address until after getting result of adding its replacement. He also does some cleanup by removing unused functions and making applicable functions static. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: iavf: make functions static where possible iavf: remove some unused functions and pointless wrappers iavf: fix err handling for MAC replace ==================== Link: https://lore.kernel.org/r/20230622165914.2203081-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24net: phy: broadcom: drop brcm_phy_setbits() and use phy_set_bits() insteadGiulio Benetti1-15/+4
Linux provides phy_set_bits() helper so let's drop brcm_phy_setbits() and use phy_set_bits() in its place. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230622184721.24368-1-giulio.benetti@benettiengineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24Merge branch '1GbE' of ↵Jakub Kicinski3-47/+117
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== igc: TX timestamping fixes This is the fixes part of the series intended to add support for using the 4 timestamp registers present in i225/i226. Moving the timestamp handling to be inline with the interrupt handling has the advantage of improving the TX timestamping retrieval latency, here are some numbers using ntpperf: Before: $ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o -37 | responses | TX timestamp offset (ns) rate clients | lost invalid basic xleave | min mean max stddev 1000 100 0.00% 0.00% 0.00% 100.00% -56 +9 +52 19 1500 150 0.00% 0.00% 0.00% 100.00% -40 +30 +75 22 2250 225 0.00% 0.00% 0.00% 100.00% -11 +29 +72 15 3375 337 0.00% 0.00% 0.00% 100.00% -18 +40 +88 22 5062 506 0.00% 0.00% 0.00% 100.00% -19 +23 +77 15 7593 759 0.00% 0.00% 0.00% 100.00% +7 +47 +5168 43 11389 1138 0.00% 0.00% 0.00% 100.00% -11 +41 +5240 39 17083 1708 0.00% 0.00% 0.00% 100.00% +19 +60 +5288 50 25624 2562 0.00% 0.00% 0.00% 100.00% +1 +56 +5368 58 38436 3843 0.00% 0.00% 0.00% 100.00% -84 +12 +8847 66 57654 5765 0.00% 0.00% 100.00% 0.00% 86481 8648 0.00% 0.00% 100.00% 0.00% 129721 12972 0.00% 0.00% 100.00% 0.00% 194581 16384 0.00% 0.00% 100.00% 0.00% 291871 16384 27.35% 0.00% 72.65% 0.00% 437806 16384 50.05% 0.00% 49.95% 0.00% After: $ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o -37 | responses | TX timestamp offset (ns) rate clients | lost invalid basic xleave | min mean max stddev 1000 100 0.00% 0.00% 0.00% 100.00% -44 +0 +61 19 1500 150 0.00% 0.00% 0.00% 100.00% -6 +39 +81 16 2250 225 0.00% 0.00% 0.00% 100.00% -22 +25 +69 15 3375 337 0.00% 0.00% 0.00% 100.00% -28 +15 +56 14 5062 506 0.00% 0.00% 0.00% 100.00% +7 +78 +143 27 7593 759 0.00% 0.00% 0.00% 100.00% -54 +24 +144 47 11389 1138 0.00% 0.00% 0.00% 100.00% -90 -33 +28 21 17083 1708 0.00% 0.00% 0.00% 100.00% -50 -2 +35 14 25624 2562 0.00% 0.00% 0.00% 100.00% -62 +7 +66 23 38436 3843 0.00% 0.00% 0.00% 100.00% -33 +30 +5395 36 57654 5765 0.00% 0.00% 100.00% 0.00% 86481 8648 0.00% 0.00% 100.00% 0.00% 129721 12972 0.00% 0.00% 100.00% 0.00% 194581 16384 19.50% 0.00% 80.50% 0.00% 291871 16384 35.81% 0.00% 64.19% 0.00% 437806 16384 55.40% 0.00% 44.60% 0.00% During this series, and to show that as is always the case, things are never easy as they should be, a hardware issue was found, and it took some time to find the workaround(s). The bug and workaround are better explained in patch 4/4. Note: the workaround has a simpler alternative, but it would involve adding support for the other timestamp registers, and only using the TXSTMP{H/L}_0 as a way to clear the interrupt. But I feel bad about throwing this kind of resources away. Didn't test this extensively but it should work. Also, as Marc Kleine-Budde suggested, after some consensus is reached on this series, most parts of it will be proposed for igb. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igc: Work around HW bug causing missing timestamps igc: Retrieve TX timestamp during interrupt handling igc: Check if hardware TX timestamping is enabled earlier igc: Fix race condition in PTP tx code ==================== Link: https://lore.kernel.org/r/20230622165244.2202786-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-23mlxsw: spectrum_router: Track next hops at CRIFsPetr Machata1-52/+75
Move the list of next hops from struct mlxsw_sp_rif to mlxsw_sp_crif. The reason is that eventually, next hops for mlxsw uppers should be offloaded and unoffloaded on demand as a netdevice becomes an upper, or stops being one. Currently, next hops are tracked at RIFs, but RIFs do not exist when a netdevice is not an mlxsw uppers. CRIFs are kept track of throughout the netdevice lifetime. Correspondingly, track at each next hop not its RIF, but its CRIF (from which a RIF can always be deduced). Note that now that next hops are tracked at a CRIF, it is not necessary to move each over to a new RIF when it is necessary to edit a RIF. Therefore drop mlxsw_sp_nexthop_rif_migrate() and have mlxsw_sp_rif_migrate_destroy() call mlxsw_sp_nexthop_rif_update() directly. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Link: https://lore.kernel.org/r/e7c1c0a7dd13883b0f09aeda12c4fcf4d63a70e3.1687438411.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-23mlxsw: spectrum_router: Split nexthop finalization to two stagesPetr Machata1-4/+9
Nexthop finalization consists of two steps: the part where the offload is removed, because the backing RIF is now gone; and the part where the association to the RIF is severed. Extract from mlxsw_sp_nexthop_type_fini() a helper that covers the unoffloading part, mlxsw_sp_nexthop_type_rif_gone(), so that it can later be called independently. Note that this swaps around the ordering of mlxsw_sp_nexthop_ipip_fini() vs. mlxsw_sp_nexthop_rif_fini(). The current ordering is more of a historical happenstance than a conscious decision. The two cleanups do not depend on each other, and this change should have no observable effects. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Link: https://lore.kernel.org/r/7134559534c5f5c4807c3a1569fae56f8887e763.1687438411.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-23mlxsw: spectrum_router: Use router.lb_crif instead of .lb_rif_indexPetr Machata2-9/+4
A previous patch added a pointer to loopback CRIF to the router data structure. That makes the loopback RIF index redundant, as everything necessary can be derived from the CRIF. Drop the field and adjust the code accordingly. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Link: https://lore.kernel.org/r/8637bf959bc5b6c9d5184b9bd8a0cd53c5132835.1687438411.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-23mlxsw: spectrum_router: Link CRIFs to RIFsPetr Machata1-12/+47
When a RIF is about to be created, the registration of the netdevice that it should be associated with must have been seen in the past, and a CRIF created. Therefore make this a hard requirement by looking up the CRIF during RIF creation, and complaining loudly when there isn't one. This then allows to keep a link between a RIF and its corresponding CRIF (and back, as the relationship is one-to-at-most-one), which do. The CRIF will later be useful as the objects tracked there will be offloaded lazily as a result of RIF creation. CRIFs are created when an "interesting" netdevice is registered, and destroyed after such device is unregistered. CRIFs are supposed to already exist when a RIF creation request arises, and exist at least as long as that RIF exists. This makes for a simple invariant: it is always safe to dereference CRIF pointer from "its" RIF. To guarantee this, CRIFs cannot be removed immediately when the UNREGISTER event is delivered. The reason is that if a RIF's netdevices has an IPv6 address, removal of this address is notified in an atomic block. To remove the RIF, the IPv6 removal handler schedules a work item. It must be safe for this work item to access the associated CRIF as well. Thus when a netdevice that backs the CRIF is removed, if it still has a RIF, do not actually free the CRIF, only toggle its can_destroy flag, which this patch adds. Later on, mlxsw_sp_rif_destroy() collects the CRIF. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Link: https://lore.kernel.org/r/68c8e33afa6b8c03c431b435e1685ffdff752e63.1687438411.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.