aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2020-12-14mlxsw: reg: Add Router XLT Enable RegisterJiri Pirko1-0/+44
The RXLTE enables XLT (eXtended Lookup Table) LPM lookups if a capable XM is present on the system. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14mlxsw: reg: Add XM Direct RegisterJiri Pirko1-3/+271
The XMDR allows direct access to the XM device via the switch. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14bnxt_en: Enable batch mode when using HWRM_NVM_MODIFY to flash packages.Michael Chan1-9/+40
The current scheme allocates a DMA buffer as big as the requested firmware package file and DMAs the contents to firmware in one operation. The buffer size can be several hundred kilo bytes and the driver may not be able to allocate the memory. This will cause firmware upgrade to fail. Improve the scheme by using smaller DMA blocks and calling firmware to DMA each block in a batch mode. Older firmware can cause excessive NVRAM erases if the block size is too small so we try to allocate a 256K buffer to begin with and size it down successively if we cannot allocate the memory. Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14bnxt_en: Retry installing FW package under NO_SPACE error condition.Pavan Chebbi1-5/+32
In bnxt_flash_package_from_fw_obj(), if firmware returns the NO_SPACE error, call __bnxt_flash_nvram() to create the UPDATE directory and then loop back and retry one more time. Since the first try may fail, we use the silent version to send the firmware commands. Reviewed-by: Vasundhara Volam <[email protected]> Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14bnxt_en: Restructure bnxt_flash_package_from_fw_obj() to execute in a loop.Pavan Chebbi1-32/+28
On NICs with a smaller NVRAM, FW installation may fail after multiple updates due to fragmentation. The driver can retry when FW returns a special error code. To faciliate the retry, we restructure the logic that performs the flashing in a loop. The actual retry logic will be added in the next patch. Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14bnxt_en: Rearrange the logic in bnxt_flash_package_from_fw_obj().Michael Chan1-33/+30
This function will be modified in the next patch to retry flashing the firmware in a loop. To facilate that, we rearrange the code so that the steps that only need to be done once before the loop will be moved to the top of the function. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14bnxt_en: Refactor bnxt_flash_nvram.Pavan Chebbi1-19/+32
Refactor bnxt_flash_nvram() into __bnxt_flash_nvram() that takes an additional dir_item_len parameter. The new function will be used in subsequent patches with the dir_item_len parameter set to create the UPDATE directory during flashing. Signed-off-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14Merge tag 'sched-core-2020-12-14' of ↵Linus Torvalds1-7/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - migrate_disable/enable() support which originates from the RT tree and is now a prerequisite for the new preemptible kmap_local() API which aims to replace kmap_atomic(). - A fair amount of topology and NUMA related improvements - Improvements for the frequency invariant calculations - Enhanced robustness for the global CPU priority tracking and decision making - The usual small fixes and enhancements all over the place * tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) sched/fair: Trivial correction of the newidle_balance() comment sched/fair: Clear SMT siblings after determining the core is not idle sched: Fix kernel-doc markup x86: Print ratio freq_max/freq_base used in frequency invariance calculations x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC x86, sched: Calculate frequency invariance for AMD systems irq_work: Optimize irq_work_single() smp: Cleanup smp_call_function*() irq_work: Cleanup sched: Limit the amount of NUMA imbalance that can exist at fork time sched/numa: Allow a floating imbalance between NUMA nodes sched: Avoid unnecessary calculation of load imbalance at clone time sched/numa: Rename nr_running and break out the magic number sched: Make migrate_disable/enable() independent of RT sched/topology: Condition EAS enablement on FIE support arm64: Rebuild sched domains on invariance status changes sched/topology,schedutil: Wrap sched domains rebuild sched/uclamp: Allow to reset a task uclamp constraint value sched/core: Fix typos in comments Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug ...
2020-12-14ice, xsk: Move Rx allocation out of while-loopBjörn Töpel1-6/+3
Instead doing the check for allocation in each loop, move it outside the while loop and do it every NAPI loop. This change boosts the xdpsock rxdrop scenario with 15% more packets-per-second. Reviewed-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14net: mtk_eth: simplify the mediatek code return expressionZheng Yongjun1-12/+4
Simplify the return expression at mtk_eth_path.c file, simplify this all. Signed-off-by: Zheng Yongjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14octeontx2-af: Add devlink health reporters for NPAGeorge Cherian3-1/+765
Add health reporters for RVU NPA block. NPA Health reporters handle following HW event groups - GENERAL events - ERROR events - RAS events - RVU event Output: #devlink health pci/0002:01:00.0: reporter hw_npa_intr state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_gen state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_err state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_ras state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true #devlink health dump show pci/0002:01:00.0 reporter hw_npa_err NPA_AF_ERR: NPA Error Interrupt Reg : 4096 AQ Doorbell Error #devlink health dump show pci/0002:01:00.0 reporter hw_npa_ras NPA_AF_RVU_RAS: NPA RAS Interrupt Reg : 0 Each reporter dump shows the Register value and the description of the cause. Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: Jerin Jacob <[email protected]> Signed-off-by: George Cherian <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14octeontx2-af: Add devlink suppoort to af driverGeorge Cherian6-2/+98
Add devlink support to AF driver. Basic devlink support is added. Currently info_get is the only supported devlink ops. devlink ouptput looks like this # devlink dev pci/0002:01:00.0 # devlink dev info pci/0002:01:00.0: driver octeontx2-af # Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: Jerin Jacob <[email protected]> Signed-off-by: George Cherian <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14net: mhi: Fix unexpected queue wakeLoic Poulain1-1/+2
This patch checks that MHI queue is not full before waking up the net queue. This fix sporadic MHI queueing issues in xmit. Indeed xmit and its symmetric complete callback (ul_callback) can run concurently, it is then not safe to unconditionnaly waking the queue in the callback without checking queue fullness. Fixes: 3ffec6a14f24 ("net: Add mhi-net driver") Signed-off-by: Loic Poulain <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14net: dsa: mv88e6xxx: don't set non-existing learn2all bit for 6220/6250Rasmus Villemoes1-3/+10
The 6220 and 6250 switches do not have a learn2all bit in global1, ATU control register; bit 3 is reserverd. On the switches that do have that bit, it is used to control whether learning frames are sent out the ports that have the message_port bit set. So rather than adding yet another chip method, use the existence of the ->port_setup_message_port method as a proxy for determining whether the learn2all bit exists (and should be set). Signed-off-by: Rasmus Villemoes <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-14Merge branch 'linus' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add speed testing on 1420-byte blocks for networking Algorithms: - Improve performance of chacha on ARM for network packets - Improve performance of aegis128 on ARM for network packets Drivers: - Add support for Keem Bay OCS AES/SM4 - Add support for QAT 4xxx devices - Enable crypto-engine retry mechanism in caam - Enable support for crypto engine on sdm845 in qce - Add HiSilicon PRNG driver support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits) crypto: qat - add capability detection logic in qat_4xxx crypto: qat - add AES-XTS support for QAT GEN4 devices crypto: qat - add AES-CTR support for QAT GEN4 devices crypto: atmel-i2c - select CONFIG_BITREVERSE crypto: hisilicon/trng - replace atomic_add_return() crypto: keembay - Add support for Keem Bay OCS AES/SM4 dt-bindings: Add Keem Bay OCS AES bindings crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd crypto: seed - remove trailing semicolon in macro definition crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg crypto: cpt - Fix sparse warnings in cptpf hwrng: ks-sa - Add dependency on IOMEM and OF crypto: lib/blake2s - Move selftest prototype into header file crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata crypto: ecdh - avoid unaligned accesses in ecdh_set_secret() crypto: ccree - rework cache parameters handling crypto: cavium - Use dma_set_mask_and_coherent to simplify code crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code ...
2020-12-14can: m_can: use struct m_can_classdev as drvdataMarc Kleine-Budde3-14/+13
The m_can driver's suspend and resume functions (m_can_class_suspend() and m_can_class_resume()) make use of dev_get_drvdata() and assume that the drvdata is a pointer to the struct net_device. With upcoming conversion of the tcan4x5x driver to pm_runtime this assumption is no longer valid. As the suspend and resume functions actually need a struct m_can_classdev pointer, change the m_can_platform and the m_can_pci driver to hold a pointer to struct m_can_classdev instead, as the tcan4x5x driver already does. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Sean Nyekjaer <[email protected]> Reviewed-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-12-14can: m_can: let m_can_class_allocate_dev() allocate driver specific private dataMarc Kleine-Budde5-50/+56
This patch enhances m_can_class_allocate_dev() to allocate driver specific private data. The driver's private data struct must contain struct m_can_classdev as its first member followed by the remaining private data. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Sean Nyekjaer <[email protected]> Reviewed-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-12-14can: m_can: m_can_clk_start(): make use of pm_runtime_resume_and_get()Marc Kleine-Budde1-9/+1
With patch | dd8088d5a896 PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter the usual pm_runtime_get_sync() and pm_runtime_put_noidle() in-case-of-error dance is no longer needed. Convert the m_can driver to use this function. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Sean Nyekjaer <[email protected]> Reviewed-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-12-14can: m_can: m_can_config_endisable(): mark as staticMarc Kleine-Budde2-2/+1
The function m_can_config_endisable() is not used outside of the m_can driver, so mark it as static. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Sean Nyekjaer <[email protected]> Reviewed-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-12-14can: m_can: use cdev as name for struct m_can_classdev uniformlyMarc Kleine-Budde1-49/+49
This patch coverts the m_can driver to use cdev as name for struct m_can_classdev uniformly throughout the whole driver. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Sean Nyekjaer <[email protected]> Reviewed-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-12-14can: m_can: convert indention to kernel coding styleMarc Kleine-Budde1-45/+43
This patch converts the indention in the m_can driver to kernel coding style. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Sean Nyekjaer <[email protected]> Reviewed-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-12-14can: m_can: update link to M_CAN user manualMarc Kleine-Budde1-2/+1
Old versions of the user manual are regularly depublished, so change link to the linux-can github page, which has a mirror off all published datasheets. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Sean Nyekjaer <[email protected]> Reviewed-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-12-14xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()SeongJae Park1-1/+1
Some code does not directly make 'xenbus_watch' object and call 'register_xenbus_watch()' but use 'xenbus_watch_path()' instead. This commit adds support of 'will_handle' callback in the 'xenbus_watch_path()' and it's wrapper, 'xenbus_watch_pathfmt()'. This is part of XSA-349 Cc: [email protected] Signed-off-by: SeongJae Park <[email protected]> Reported-by: Michael Kurth <[email protected]> Reported-by: Pawel Wieczorkiewicz <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2020-12-14xen/xenbus: Allow watches discard events before queueingSeongJae Park1-0/+4
If handling logics of watch events are slower than the events enqueue logic and the events can be created from the guests, the guests could trigger memory pressure by intensively inducing the events, because it will create a huge number of pending events that exhausting the memory. Fortunately, some watch events could be ignored, depending on its handler callback. For example, if the callback has interest in only one single path, the watch wouldn't want multiple pending events. Or, some watches could ignore events to same path. To let such watches to volutarily help avoiding the memory pressure situation, this commit introduces new watch callback, 'will_handle'. If it is not NULL, it will be called for each new event just before enqueuing it. Then, if the callback returns false, the event will be discarded. No watch is using the callback for now, though. This is part of XSA-349 Cc: [email protected] Signed-off-by: SeongJae Park <[email protected]> Reported-by: Michael Kurth <[email protected]> Reported-by: Pawel Wieczorkiewicz <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2020-12-12net: dsa: mt7530: enable MTU normalizationDENG Qingfang1-0/+2
MT7530 has a global RX length register, so we are actually changing its MRU. Enable MTU normalization for this reason. Signed-off-by: DENG Qingfang <[email protected]> Acked-by: Landen Chao <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-12Merge tag 'wireless-drivers-next-2020-12-12' of ↵Jakub Kicinski276-10777/+6622
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.11 Second set of patches for v5.11. iwlwifi gaining support for the new 6 GHz band and rtw88 got a new channel. Lots of new features for mt76 and ath11k now has working suspend for PCI devices. And as always, smaller fixes and cleanups all over. Major changes: rtw88 * add support for channel 144 mt76 * support for more sta interfaces on mt7615/mt7915 * mt7915 encapsulation offload * performance improvements * channel noise report on mt7915 * mt7915 testmode support * mt7915 DBDC support iwlwifi * support 6 GHz band ath11k * suspend support for QCA6390 PCI devices * support TXOP duration based RTS threshold * mesh: add support for 256 bitmap in blockack frames in 11ax * tag 'wireless-drivers-next-2020-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (197 commits) ath11k: implement suspend for QCA6390 PCI devices ath11k: hif: add ce irq enable and disable functions ath11k: implement WoW enable and wakeup commands ath11k: set credit_update flag for flow controlled ep only ath11k: dp: stop rx pktlog before suspend ath11k: htc: implement suspend handling ath11k: htc: remove unused struct ath11k_htc_ops ath11k: pci: read select_window register to ensure write is finished ath11k: hif: implement suspend and resume functions ath11k: mhi: hook suspend and resume ath11k: Fix incorrect tlvs in scan start command ath11k: pci: disable VDD4BLOW ath11k: pci: fix L1ss clock unstable problem ath11k: pci: fix hot reset stability issues ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID ath11k: mhi: print a warning if firmware crashed ath11k: use MHI provided APIs to allocate and free MHI controller ath10k: add atomic protection for device recovery ath10k: add option for chip-id based BDF selection mt76: remove unused variable q ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski44-151/+288
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-12Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo40-131/+1033
ath.git patches for v5.11. Major changes: ath11k * suspend support for QCA6390 PCI devices * support TXOP duration based RTS threshold * mesh: add support for 256 bitmap in blockack frames in 11ax
2020-12-12ath11k: implement suspend for QCA6390 PCI devicesCarl Huang8-2/+124
Now that all the needed pieces are in place implement suspend support QCA6390 PCI devices. All other devices will return -EOPNOTSUPP during suspend. The suspend is implemented by switching the firmware to WoW mode during suspend, so the firmware will be running on low power mode while host is in suspend. At the moment we are not able to shutdown and fully power off the device due to bugs in MHI subsystem, so WoW mode is a workaround for the time being. During suspend we enable WoW mode, disable CE irq and DP irq, then put MHI to suspend state. During resume, driver resumes MHI firstly, then enables CE irq and dp IRQ, and sends WoW wakeup command to firmware. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: hif: add ce irq enable and disable functionsCarl Huang2-1/+32
Add ce irq enable and disable hif layer functions, so core module can enable enable them without cleaning pipe and refilling pipe. Needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: implement WoW enable and wakeup commandsCarl Huang7-1/+355
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: set credit_update flag for flow controlled ep onlyCarl Huang1-3/+5
Firmware will check all the pipes before entering WoW mode during suspend. If ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to return credit even though it's actually not required. If any pipe needs to return credit, the suspend_complete message doesn't send to host but is dropped. So host gets time out and WoW suspend failed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: dp: stop rx pktlog before suspendCarl Huang4-0/+56
Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep it empty. During resume restart the reap timer. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: htc: implement suspend handlingCarl Huang4-2/+31
When ath11k sends suspend command to firmware, firmware will return suspend_complete events and add handlers for those. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: htc: remove unused struct ath11k_htc_opsKalle Valo1-6/+0
No need for it so remove. Compile tested only. Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: pci: read select_window register to ensure write is finishedCarl Huang1-0/+1
Just when resume from WoW, the write to select_window doesn't take effect immediately, so read the register again to ensure the write operation is finished. Another change is to reset select_window to ZERO because this register isn't restored after WoW, so the content of this register becomes ZERO too. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: hif: implement suspend and resume functionsCarl Huang2-0/+38
For suspend support add suspend and resume to HIF layer. These ops are optional and, for example, AHB bus driver does not need to implement these. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: mhi: hook suspend and resumeCarl Huang2-0/+14
MHI suspend and resume isn't hooked in ath11k yet, so hook these functions needed for suspend support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: Fix incorrect tlvs in scan start commandPradeep Kumar Chitrapu1-31/+0
Currently 6G specific tlvs have duplicate entries which is causing scan failures. Fix this by removing the duplicate entries of the same tlv. This also fixes out-of-bound memory writes caused due to adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Fixes: 74601ecfef6e ("ath11k: Add support for 6g scan hint") Reported-by: Carl Huang <[email protected]> Signed-off-by: Pradeep Kumar Chitrapu <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: pci: disable VDD4BLOWCarl Huang2-0/+13
It's recommended to disable VDD4BLOW during initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: pci: fix L1ss clock unstable problemCarl Huang2-0/+81
For QCA6390, one PCI related clock drifts sometimes, and it makes PCI link difficult to quit L1ss. Fix it by writing some registers which are known to fix the problem. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: pci: fix hot reset stability issuesCarl Huang2-5/+57
For QCA6390, host needs to reset some registers before MHI power up to fix PCI link unstable issue if hot reset happened. Also clear all pending interrupts during power up. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDIDCarl Huang4-13/+46
It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware to dbs mode instead of wmi_init command. This fixes a few strange stability issues. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: mhi: print a warning if firmware crashedKalle Valo1-0/+9
There was no way to detect if the firmware crashed so add a warning. At the moment the firmware is not restarted or anything like that, so when this happens ath11k modules need to be reloaded. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: use MHI provided APIs to allocate and free MHI controllerBhaumik Bhatt1-3/+4
Use MHI provided APIs to allocate and free MHI controller to improve MHI host driver handling. This also fixes a memory leak as the MHI controller was allocated but never freed. Signed-off-by: Bhaumik Bhatt <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath10k: add atomic protection for device recoveryWen Gong8-9/+25
When it has more than one restart_work queued meanwhile, the 2nd restart_work is very easy to break the 1st restart work and lead recovery fail. Add a flag to allow only one restart work running untill device successfully recovered. It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this flag again, because it is clear in ath10k_core_start. The function ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do many things and drv_start(call to ath10k_core_start) is 1st thing, when drv_start complete, it does not mean restart complete. So it add new flag and clear it in ath10k_reconfig_complete, because it is the last thing called from drv_reconfig_complete of function ieee80211_reconfig, after it, the restart process finished. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com
2020-12-12ath10k: add option for chip-id based BDF selectionAbhishek Kumar1-11/+32
In some devices difference in chip-id should be enough to pick the right BDF. Add another support for chip-id based BDF selection. With this new option, ath10k supports 2 fallback options. The board name with chip-id as option looks as follows board name 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320' Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00696-QCAHLSWMTPL-1 Tested-on: QCA6174 HW3.2 WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by: Abhishek Kumar <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Rakesh Pillai <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20201207231824.v3.1.Ia6b95087ca566f77423f3802a78b946f7b593ff5@changeid
2020-12-11mt76: remove unused variable qSouptick Joarder1-3/+0
Kernel test robot reported warning: drivers/net/wireless/mediatek/mt76/tx.c: In function 'mt76_txq_schedule': >> drivers/net/wireless/mediatek/mt76/tx.c:499:21: warning: variable 'q' >> set but not used [-Wunused-but-set-variable] 499 | struct mt76_queue *q; | ^ Reported-by: kernel test robot <[email protected]> Signed-off-by: Souptick Joarder <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11iwlwifi: fw: acpi: Demote non-conformant function headersLee Jones1-6/+6
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/fw/acpi.c:123: warning: Function parameter or member 'dev' not described in 'iwl_acpi_get_dsm_object' drivers/net/wireless/intel/iwlwifi/fw/acpi.c:123: warning: Function parameter or member 'rev' not described in 'iwl_acpi_get_dsm_object' drivers/net/wireless/intel/iwlwifi/fw/acpi.c:123: warning: Function parameter or member 'func' not described in 'iwl_acpi_get_dsm_object' drivers/net/wireless/intel/iwlwifi/fw/acpi.c:123: warning: Function parameter or member 'args' not described in 'iwl_acpi_get_dsm_object' drivers/net/wireless/intel/iwlwifi/fw/acpi.c:142: warning: Function parameter or member 'dev' not described in 'iwl_acpi_get_dsm_u8' drivers/net/wireless/intel/iwlwifi/fw/acpi.c:142: warning: Function parameter or member 'rev' not described in 'iwl_acpi_get_dsm_u8' drivers/net/wireless/intel/iwlwifi/fw/acpi.c:142: warning: Function parameter or member 'func' not described in 'iwl_acpi_get_dsm_u8' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-11iwlwifi: fw: dbg: Fix misspelling of 'reg_data' in function headerLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/fw/dbg.c:1932: warning: Function parameter or member 'reg_data' not described in 'iwl_dump_ini_mem' drivers/net/wireless/intel/iwlwifi/fw/dbg.c:1932: warning: Excess function parameter 'reg' description in 'iwl_dump_ini_mem' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Shahar S Matityahu <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.