aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-07-25net: ethernet: mtk_eth_soc: rely on page_pool for single page buffersLorenzo Bianconi3-40/+156
Rely on page_pool allocator for single page buffers in order to keep them dma mapped and add skb recycling support. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22Merge branch '100GbE' of ↵Jakub Kicinski6-35/+299
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-07-21 This series contains updates to ice driver only. Karol adds implementation for GNSS write; data is written to the GNSS module through TTY device using u-blox UBX protocol. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: add write functionality for GNSS TTY ice: add i2c write command ==================== Link: https://lore.kernel.org/r/20220721202842.3276257-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: usb: ax88179_178a: wol optimizationsJustin Chen1-24/+28
- Check if wol is supported on reset instead of everytime get_wol is called. - Save wolopts in private data instead of relying on the HW to save it. - Defer enabling WoL until suspend instead of enabling it everytime set_wol is called. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: usb: ax88179_178a: move priv to driver_privJustin Chen1-13/+19
We need more space to save WoL context. So lets allocate memory for ax88179_data instead of using struct usbnet data field which only supports 5 words. We continue to use the struct usbnet data field for multicast filters. However since we no longer have the private data stored there, we can shift it to the beginning. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: usb: ax88179_178a: restore state on resumeJustin Chen1-26/+1
The hardware state was only partially restored, which meant certain functionality was broken on resume. Do a full HW reset on resume to fix this. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: usb: ax88179_178a: clean up pm callsJustin Chen1-88/+59
Instead of passing in_pm flags all over the place, use the private struct to handle in_pm mode. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22net: usb: ax88179_178a: remove redundant init codeJustin Chen1-81/+4
Bind and reset are basically doing the same thing. Remove the duplicate code and have bind call into reset. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22mlxsw: core: Fix use-after-free calling devl_unlock() in ↵Jiri Pirko1-2/+2
mlxsw_core_bus_device_unregister() Do devl_unlock() before freeing the devlink in mlxsw_core_bus_device_unregister() function. Reported-by: Ido Schimmel <idosch@nvidia.com> Fixes: 72a4c8c94efa ("mlxsw: convert driver to use unlocked devlink API during init/fini") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220721142424.3975704-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22sfc: attach/detach EF100 representors along with their owning PFEdward Cree5-3/+59
Since representors piggy-back on the PF's queues for TX, they can only accept new TXes while the PF is up. Thus, any operation which detaches the PF must first detach all its VFreps. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22sfc: hook up ef100 representor TXEdward Cree3-1/+38
Implement .ndo_start_xmit() by calling into the parent PF's TX path. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22sfc: support passing a representor to the EF100 TX pathEdward Cree7-17/+123
A non-null efv in __ef100_enqueue_skb() indicates that the packet is from that representor, should be transmitted with a suitable option descriptor (to instruct the switch to deliver it to the representee), and should not be accounted to the parent PF's stats or BQL. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22sfc: determine representee m-port for EF100 representorsEdward Cree5-1/+96
An MAE port, or m-port, is a port (source/destination for traffic) on the Match-Action Engine (the internal switch on EF100). Representors will use their representee's m-port for two purposes: as a destination override on TX from the representor, and as a source match in 'default rules' to steer representee traffic (when not matched by e.g. a TC flower rule) to representor RX via the parent PF's receive queue. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22sfc: phys port/switch identification for ef100 repsEdward Cree2-2/+39
Requires storing VF index in struct efx_rep. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22sfc: add basic ethtool ops to ef100 repsEdward Cree1-0/+26
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22sfc: add skeleton ef100 VF representorsEdward Cree8-11/+196
No net_device_ops yet, just a placeholder netdev created per VF. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22sfc: detect ef100 MAE admin privilege/capability at probe timeEdward Cree4-0/+55
One PCIe function per network port (more precisely, per m-port group) is responsible for configuring the Match-Action Engine which performs switching and packet modification in the slice to support flower/OVS offload. The GRP_MAE bit in the privilege mask indicates whether a given function has this capability. At probe time, call MCDIs to read the calling function's privilege mask, and store the GRP_MAE bit in a new ef100_nic_data member. Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22sfc: update EF100 register descriptionsEdward Cree1-23/+60
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22net: marvell: prestera: use netif_is_any_bridge_port instead of open codeJuhee Kang1-2/+2
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is defined as a new helper function on netdev.h like netif_is_any_bridge_port that can check both IFF flags in 1 go. So use netif_is_any_bridge_port() function instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22mlxsw: use netif_is_any_bridge_port() instead of open codeJuhee Kang1-3/+1
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is defined as a new helper function on netdev.h like netif_is_any_bridge_port that can check both IFF flags in 1 go. So use netif_is_any_bridge_port() function instead of open code. This patch doesn't change logic. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-21Merge tag 'linux-can-next-for-5.20-20220721' of ↵Jakub Kicinski1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== can-next 2022-07-21 The patch is by Vincent Mailhol and fixes a use on an uninitialized variable in the pch_can driver (introduced in last pull request to net-next). * tag 'linux-can-next-for-5.20-20220721' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: pch_can: pch_can_error(): initialize errc before using it ==================== Link: https://lore.kernel.org/r/20220721163042.3448384-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: fix buildPaolo Abeni6-24/+24
After commit 2c7b9b936bdc ("net: ipa: move configuration data files into a subdirectory"), build of the ipa driver fails with the following error: drivers/net/ipa/data/ipa_data-v3.1.c:9:10: fatal error: gsi.h: No such file or directory After the mentioned commit, all the file included by the configuration are in the parent directory. Fix the issue updating the include path. Fixes: 2c7b9b936bdc ("net: ipa: move configuration data files into a subdirectory") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/7105112c38cfe0642a2d9e1779bf784a7aa63d16.1658411666.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21ice: add write functionality for GNSS TTYKarol Kolacinski3-31/+245
Add the possibility to write raw bytes to the GNSS module through the first TTY device. This allows user to configure the module. Create a second read-only TTY device. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski42-260/+546
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21ice: add i2c write commandKarol Kolacinski3-4/+54
Add the possibility to write to connected i2c devices using the AQ command. FW may reject the write if the device is not on allowlist. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21can: pch_can: pch_can_error(): initialize errc before using itVincent Mailhol1-1/+1
After commit 3a5c7e4611dd, the variable errc is accessed before being initialized, c.f. below W=2 warning: | In function 'pch_can_error', | inlined from 'pch_can_poll' at drivers/net/can/pch_can.c:739:4: | drivers/net/can/pch_can.c:501:29: warning: 'errc' may be used uninitialized [-Wmaybe-uninitialized] | 501 | cf->data[6] = errc & PCH_TEC; | | ^ | drivers/net/can/pch_can.c: In function 'pch_can_poll': | drivers/net/can/pch_can.c:484:13: note: 'errc' was declared here | 484 | u32 errc, lec; | | ^~~~ Moving errc initialization up solves this issue. Fixes: 3a5c7e4611dd ("can: pch_can: do not report txerr and rxerr during bus-off") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/all/20220721160032.9348-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-21net/cdc_ncm: Enable ZLP for DisplayLink ethernet devicesDominik Czerwik1-1/+24
This improves performance and stability of DL-3xxx/DL-5xxx/DL-6xxx device series. Specifically prevents device from temporary network dropouts when playing video from the web and network traffic going through is high. Signed-off-by: Dominik Czerwik <dominik.czerwik@synaptics.com> Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com> Link: https://lore.kernel.org/r/20220720060518.541-1-lukasz.spintzyk@synaptics.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-20net: ipa: move configuration data files into a subdirectoryAlex Elder7-1/+1
Reduce the clutter in the main IPA source directory by creating a new "data" subdirectory, and locating all of the configuration data files in there. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: ipa: list supported IPA versions in the MakefileAlex Elder1-3/+7
Create a variable in the Makefile listing the IPA versions supported by the driver. Use that to create the list of configuration data object files used (rather than listing them all individually). Add a SPDX license comment. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: ipa: fix an outdated commentAlex Elder1-1/+1
Since commit 8797972afff3d ("net: ipa: remove command info pool"), we don't allocate "command info" entries for command channel transactions. Fix a comment that seems to suggest we still do. (Even before that commit, the comment was out of place.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: ipa: report when the driver has been removedAlex Elder1-0/+2
When the IPA driver has completed its initialization and setup stages, it emits a brief message to the log. Add a small message that reports when it has been removed. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: ipa: skip some cleanup for unused transactionsAlex Elder1-1/+2
In gsi_trans_free(), there's no point in ipa_gsi_trans_release() if a transaction is unused. No used TREs means no IPA layer resources to clean up. So only call ipa_gsi_trans_release() if at least one TRE was used. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: ipa: rearrange transaction initializationAlex Elder2-30/+33
The transaction map is really associated with the transaction pool; move its definition earlier in the gsi_trans_info structure. Rearrange initialization in gsi_channel_trans_init() so it sets the tre_avail value first, then initializes the transaction pool, and finally allocating the transaction map. Update comments. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: ipa: add a transaction committed listAlex Elder3-7/+29
We currently put a transaction on the pending list when it has been committed. But until the channel's doorbell rings, these transactions aren't actually "owned" by the hardware yet. Add a new "committed" state (and list), to represent transactions that have been committed but not yet sent to hardware. Define "pending" to mean committed transactions that have been sent to hardware but have not yet completed. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: ipa: add an endpoint device attribute groupAlex Elder3-18/+53
Create a new attribute group meant to provide a single place that defines endpoint IDs that might be needed by user space. Not all defined endpoints are presented, and only those that are defined will be made visible. The new attributes use "extended" device attributes to hold endpoint IDs, which is a little more compact and efficient. Reimplement the existing modem endpoint ID attribute files using common code. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220719191639.373249-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20net: amd8111e: remove repeated dev->features assignementJian Shen1-3/+0
It's repeated with line 1793-1795, and there isn't any other handling for it. So remove it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Link: https://lore.kernel.org/r/20220719142424.4528-1-shenjian15@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20Merge tag 'mlx5-updates-2022-07-17' of ↵Jakub Kicinski19-860/+1152
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2022-07-17 1) Add resiliency for lost completions for PTP TX port timestamp 2) Report Header-data split state via ethtool 3) Decouple HTB code from main regular TX code * tag 'mlx5-updates-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: CT: Remove warning of ignore_flow_level support for non PF net/mlx5e: Add resiliency for PTP TX port timestamp net/mlx5: Expose ts_cqe_metadata_size2wqe_counter net/mlx5e: HTB, move htb functions to a new file net/mlx5e: HTB, change functions name to follow convention net/mlx5e: HTB, remove priv from htb function calls net/mlx5e: HTB, hide and dynamically allocate mlx5e_htb structure net/mlx5e: HTB, move stats and max_sqs to priv net/mlx5e: HTB, move section comment to the right place net/mlx5e: HTB, move ids to selq_params struct net/mlx5e: HTB, reduce visibility of htb functions net/mlx5e: Fix mqprio_rl handling on devlink reload net/mlx5e: Report header-data split state through ethtool ==================== Link: https://lore.kernel.org/r/20220719203529.51151-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-20Merge tag 'linux-can-fixes-for-5.19-20220720' of ↵David S. Miller2-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request of 2 patches for net/master. The first patch is by me and fixes the detection of the mcp251863 in the mcp251xfd driver. The last patch is by Liang He and adds a missing of_node_put() in the rcar_canfd driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20net: ipa: initialize ring indexes to 0Alex Elder2-10/+13
When a GSI channel is initially allocated, and after it has been reset, the hardware assumes its ring index is 0. And although we do initialize channels this way, the comments in the IPA code don't really explain this. For event rings, it doesn't matter what value we use initially, so using 0 is just fine. Add some information about the assumptions made by hardware above the definition of the gsi_ring structure in "gsi.h". Zero the index field for all rings (channel and event) when the ring is allocated. As a result, that function initializes all fields in the structure. Stop zeroing the index the top of gsi_channel_program(). Initially we'll use the index value set when the channel ring was allocated. And we'll explicitly zero the index value in gsi_channel_reset() before programming the hardware, adding a comment explaining why it's required. For event rings, use the index initialized by gsi_ring_alloc() rather than 0 when ringing the doorbell in gsi_evt_ring_program(). (It'll still be zero, but we won't assume that to be the case.) Use a local variable in gsi_evt_ring_program() that represents the address of the event ring's ring structure. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20mlxsw: spectrum_router: Fix IPv4 nexthop gateway indicationIdo Schimmel1-1/+1
mlxsw needs to distinguish nexthops with a gateway from connected nexthops in order to write the former to the adjacency table of the device. The check used to rely on the fact that nexthops with a gateway have a 'link' scope whereas connected nexthops have a 'host' scope. This is no longer correct after commit 747c14307214 ("ip: fix dflt addr selection for connected nexthop"). Fix that by instead checking the address family of the gateway IP. This is a more direct way and also consistent with the IPv6 counterpart in mlxsw_sp_rt6_is_gateway(). Cc: stable@vger.kernel.org Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop") Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20net: marvell: prestera: add phylink supportOleksandr Mazur5-62/+334
For SFP port prestera driver will use kernel phylink infrastucture to configure port mode based on the module that has beed inserted Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20vmxnet3: Implement ethtool's get_channels commandAndrey Turkin1-0/+29
Some tools (e.g. libxdp) use that information. Signed-off-by: Andrey Turkin <andrey.turkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20Merge tag 'linux-can-next-for-5.20-20220720' of ↵David S. Miller32-145/+225
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== this is a pull request of 29 patches for net-next/master. The first 6 patches target the slcan driver. Dan Carpenter contributes a hardening patch, followed by 5 cleanup patches. Biju Das contributes 5 patches to prepare the sja1000 driver to support the Renesas RZ/N1 SJA1000 CAN controller. Dario Binacchi's patch for the slcan driver fixes a sleep with held spin lock. Another patch by Dario Binacchi fixes a wrong comment in the c_can driver. Pavel Pisa updates the CTU CAN FD IP core registers. Stephane Grosjean contributes 3 patches to the peak_usb driver for cleanups and support of a new MCU. The last 12 patches are by Vincent Mailhol, they fix and improve the txerr and rxerr reporting in all CAN drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20tcp: Fix data-races around sysctl knobs related to SYN option.Kuniyuki Iwashima1-3/+3
While reading these knobs, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - tcp_sack - tcp_window_scaling - tcp_timestamps Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.Kuniyuki Iwashima1-1/+1
While reading sysctl_fib_multipath_hash_fields, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ce5c9c20d364 ("ipv4: Add a sysctl to control multipath hash fields") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.Kuniyuki Iwashima1-1/+1
While reading sysctl_fib_multipath_hash_policy, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: bf4e0a3db97e ("net: ipv4: add support for ECMP hash policy choice") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-20can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()Liang He1-0/+1
We should use of_node_put() for the reference returned by of_get_child_by_name() which has increased the refcount. Fixes: 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC") Link: https://lore.kernel.org/all/20220712095623.364287-1-windhl@126.com Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: mcp251xfd: fix detection of mcp251863Marc Kleine-Budde1-5/+13
In commit c6f2a617a0a8 ("can: mcp251xfd: add support for mcp251863") support for the mcp251863 was added. However it was not taken into account that the auto detection of the chip model cannot distinguish between mcp2518fd and mcp251863 and would lead to a warning message if the firmware specifies a mcp251863. Fix auto detection: If a mcp2518fd compatible chip is found, keep the mcp251863 if specified by firmware, use mcp2518fd instead. Link: https://lore.kernel.org/all/20220706064835.1848864-1-mkl@pengutronix.de Fixes: c6f2a617a0a8 ("can: mcp251xfd: add support for mcp251863") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: add CAN_ERR_CNT flag to notify availability of error counterVincent Mailhol24-18/+36
Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: usb_8dev: do not report txerr and rxerr during bus-offVincent Mailhol1-3/+4
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-20can: kvaser_usb_leaf: do not report txerr and rxerr during bus-offVincent Mailhol1-2/+4
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 7259124eac7d1 ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Link: https://lore.kernel.org/all/20220719143550.3681-9-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Powered by cgit, Gruvboxed by Blaster4385.