aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-09-26macsec: drop skb sk before calling gro_cells_receiveXin Long1-0/+1
Fei Liu reported a crash when doing netperf on a topo of macsec dev over veth: [ 448.919128] refcount_t: underflow; use-after-free. [ 449.090460] Call trace: [ 449.092895] refcount_sub_and_test+0xb4/0xc0 [ 449.097155] tcp_wfree+0x2c/0x150 [ 449.100460] ip_rcv+0x1d4/0x3a8 [ 449.103591] __netif_receive_skb_core+0x554/0xae0 [ 449.108282] __netif_receive_skb+0x28/0x78 [ 449.112366] netif_receive_skb_internal+0x54/0x100 [ 449.117144] napi_gro_complete+0x70/0xc0 [ 449.121054] napi_gro_flush+0x6c/0x90 [ 449.124703] napi_complete_done+0x50/0x130 [ 449.128788] gro_cell_poll+0x8c/0xa8 [ 449.132351] net_rx_action+0x16c/0x3f8 [ 449.136088] __do_softirq+0x128/0x320 The issue was caused by skb's true_size changed without its sk's sk_wmem_alloc increased in tcp/skb_gro_receive(). Later when the skb is being freed and the skb's truesize is subtracted from its sk's sk_wmem_alloc in tcp_wfree(), underflow occurs. macsec is calling gro_cells_receive() to receive a packet, which actually requires skb->sk to be NULL. However when macsec dev is over veth, it's possible the skb->sk is still set if the skb was not unshared or expanded from the peer veth. ip_rcv() is calling skb_orphan() to drop the skb's sk for tproxy, but it is too late for macsec's calling gro_cells_receive(). So fix it by dropping the skb's sk earlier on rx path of macsec. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Reported-by: Xiumei Mu <[email protected]> Reported-by: Fei Liu <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-26Merge tag 'mlx5-fixes-2019-09-24' of ↵David S. Miller8-65/+105
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-09-24 This series introduces some fixes to mlx5 driver. For more information please see tag log below. Please pull and let me know if there is any problem. For -stable v4.20: ('net/mlx5e: Fix traffic duplication in ethtool steering') For -stable v4.19: ('net/mlx5: Add device ID of upcoming BlueField-2') For -stable v5.3: ('net/mlx5e: Fix matching on tunnel addresses type') ==================== Signed-off-by: David S. Miller <[email protected]>
2019-09-26drivers: net: Fix Kconfig indentationKrzysztof Kozlowski19-151/+151
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Kalle Valo <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-25net: macb: Remove dead codeShubhrajyoti Datta1-3/+2
macb_64b_desc is always called when HW_DMA_CAP_64B is defined. So the return NULL can never be reached. Remove the dead code. Signed-off-by: Shubhrajyoti Datta <[email protected]> Reviewed-by: Claudiu Beznea <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-25net: stmmac: selftests: Flow Control test can also run with ASYM PauseJose Abreu1-1/+1
The Flow Control selftest is also available with ASYM Pause. Lets add this check to the test and fix eventual false positive failures. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-25gianfar: Make reset_gfar staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/ethernet/freescale/gianfar.c:2070:6: warning: symbol 'reset_gfar' was not declared. Should it be static? Reported-by: Hulk Robot <[email protected]> Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-25ppp: Fix memory leak in ppp_writeTakeshi Misawa1-0/+2
When ppp is closing, __ppp_xmit_process() failed to enqueue skb and skb allocated in ppp_write() is leaked. syzbot reported : BUG: memory leak unreferenced object 0xffff88812a17bc00 (size 224): comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline] [<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline] [<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574 [<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197 [<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline] [<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502 [<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494 [<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline] [<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542 [<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611 [<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline] [<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline] [<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620 [<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296 [<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by freeing skb, if ppp is closing. Fixes: 6d066734e9f0 ("ppp: avoid loop in xmit recursion detection code") Reported-and-tested-by: [email protected] Signed-off-by: Takeshi Misawa <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Tested-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-25net/ibmvnic: prevent more than one thread from running in resetJuliet Kim2-11/+34
The current code allows more than one thread to run in reset. This can corrupt struct adapter data. Check adapter->resetting before performing a reset, if there is another reset running delay (100 msec) before trying again. Signed-off-by: Juliet Kim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-25net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can runJuliet Kim2-68/+157
Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") made the change to hold the RTNL lock during a reset to avoid deadlock but linkwatch_event is fired during the reset and needs the RTNL lock. That keeps linkwatch_event process from proceeding until the reset is complete. The reset process cannot tolerate the linkwatch_event processing after reset completes, so release the RTNL lock during the process to allow a chance for linkwatch_event to run during reset. This does not guarantee that the linkwatch_event will be processed as soon as link state changes, but is an improvement over the current code where linkwatch_event processing is always delayed, which prevents transmissions on the device from being deactivated leading transmit watchdog timer to time-out. Release the RTNL lock before link state change and re-acquire after the link state change to allow linkwatch_event to grab the RTNL lock and run during the reset. Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset") Signed-off-by: Juliet Kim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-25ieee802154: mcr20a: simplify a bit 'mcr20a_handle_rx_read_buf_complete()'Christophe JAILLET1-1/+1
Use a 'skb_put_data()' variant instead of rewritting it. The __skb_put_data variant is safe here. It is obvious that the skb can not overflow. It has just been allocated a few lines above with the same 'len'. Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Xue Liu <[email protected]> Signed-off-by: Stefan Schmidt <[email protected]>
2019-09-25wil6210: use after free in wil_netif_rx_any()Dan Carpenter1-1/+1
The debug code dereferences "skb" to print "skb->len" so we have to print the message before we free "skb". Fixes: f99fe49ff372 ("wil6210: add wil_netif_rx() helper function") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-24skge: fix checksum byte orderStephen Hemminger1-1/+1
Running old skge driver on PowerPC causes checksum errors because hardware reported 1's complement checksum is in little-endian byte order. Reported-by: Benoit <[email protected]> Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-24arcnet: provide a buffer big enough to actually receive packetsUwe Kleine-König1-14/+17
struct archdr is only big enough to hold the header of various types of arcnet packets. So to provide enough space to hold the data read from hardware provide a buffer large enough to hold a packet with maximal size. The problem was noticed by the stack protector which makes the kernel oops. Signed-off-by: Uwe Kleine-König <[email protected]> Acked-by: Michael Grzeschik <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-24iwlwifi: fw: don't send GEO_TX_POWER_LIMIT command to FW version 36Luca Coelho1-3/+5
The intention was to have the GEO_TX_POWER_LIMIT command in FW version 36 as well, but not all 8000 family got this feature enabled. The 8000 family is the only one using version 36, so skip this version entirely. If we try to send this command to the firmwares that do not support it, we get a BAD_COMMAND response from the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151. Cc: [email protected] # 4.19+ Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-24mt76: mt7615: fix mt7615 firmware path definitionsLorenzo Bianconi2-10/+7
mt7615 patch/n9/cr4 firmwares are available in mediatek folder in linux-firmware repository. Because of this mt7615 won't work on regular distributions like Ubuntu. Fix path definitions. Moreover remove useless firmware name pointers and use definitions directly Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Cc: [email protected] Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-24net/mlx5e: Fix matching on tunnel addresses typeDmytro Linkin1-36/+53
In mlx5 parse_tunnel_attr() function dispatch on encap IP address type is performed by directly checking flow_rule_match_key() on FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS, and then on FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS. However, since those are stored in union, first check is always true if any type of encap address is set, which leads to IPv6 tunnel encap address being parsed as IPv4 by mlx5. Determine correct IP address type by checking control key first and if it set, take address type from match.key->addr_type. Fixes: d1bda7eecd88 ("net/mlx5e: Allow matching only enc_key_id/enc_dst_port for decapsulation action") Signed-off-by: Dmytro Linkin <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Reviewed-by: Eli Britstein <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-09-24net/mlx5e: Fix traffic duplication in ethtool steeringSaeed Mahameed1-2/+2
Before this patch, when adding multiple ethtool steering rules with identical classification, the driver used to append the new destination to the already existing hw rule, which caused the hw to forward the traffic to all destinations (rx queues). Here we avoid this by setting the "no append" mlx5 fs core flag when adding a new ethtool rule. Fixes: 6dc6071cfcde ("net/mlx5e: Add ethtool flow steering support") Signed-off-by: Saeed Mahameed <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-09-24net/mlx5: Add device ID of upcoming BlueField-2Bodong Wang1-0/+1
Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx network controller. Its VFs will be using the generic VF device ID: 0x101e "ConnectX Family mlx5Gen Virtual Function". Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Bodong Wang <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-09-24net/mlx5: DR, Allow matching on vport based on vhca_idAlaa Hleihel3-8/+37
In case source_eswitch_owner_vhca_id is given as a match, the source_vport (vhca_id) will be set in case vhca_id_valid. This will allow matching on peer vports, vports that belong to the other pf. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Alaa Hleihel <[email protected]> Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-09-24net/mlx5: DR, Fix getting incorrect prev node in ste_freeAlex Vesker3-16/+10
When we free an STE and the STE is in the middle of collision list, the prev_ste was obtained incorrectly from the list. To avoid such issues list_entry calls replaced with standard list API. Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-09-24net/mlx5: DR, Remove redundant vport number from actionAlex Vesker2-3/+2
The vport number is part of the vport_cap, there is no reason to store in a separate variable on the vport. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Alex Vesker <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-09-24rtw88: configure firmware after HCI startedYan-Hsuan Chuang2-3/+4
After firmware has been downloaded, driver should send some information to it through H2C commands. Those H2C commands are transmitted through TX path. But before HCI has been started, the TX path is not working completely. Such as PCI interfaces, the interrupts are not enabled, hence TX interrupts will not be issued after H2C skb has been DMAed to the device. And the H2C skbs will not be released until the device is powered off. Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds7-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-22net: dsa: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file for Distributed Switch Architecture drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Nishad Kamdar <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-22net: dsa: b53: Use the correct style for SPDX License IdentifierNishad Kamdar1-2/+2
This patch corrects the SPDX License Identifier style in header file for Broadcom BCM53xx managed switch driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Nishad Kamdar <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-22ionic: Fix an error code in ionic_lif_alloc()Dan Carpenter1-0/+1
We need to set the error code on this path. Otherwise it probably results in a NULL dereference down the line. Fixes: aa3198819bea ("ionic: Add RSS support") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Shannon Nelson <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-22net: ena: Select DIMLIB for ENA_ETHERNETMao Wenan1-0/+1
If CONFIG_ENA_ETHERNET=y and CONFIG_DIMLIB=n, below erros can be found: drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_dim_work': ena_netdev.c:(.text+0x21cc): undefined reference to `net_dim_get_rx_moderation' ena_netdev.c:(.text+0x21cc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `net_dim_get_rx_moderation' drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_io_poll': ena_netdev.c:(.text+0x7bd4): undefined reference to `net_dim' ena_netdev.c:(.text+0x7bd4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `net_dim' After commit 282faf61a053 ("net: ena: switch to dim algorithm for rx adaptive interrupt moderation"), it introduces dim algorithm, which configured by CONFIG_DIMLIB. So, this patch is to select DIMLIB for ENA_ETHERNET. Fixes: 282faf61a053 ("net: ena: switch to dim algorithm for rx adaptive interrupt moderation") Signed-off-by: Mao Wenan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-21qede: qede_fp: simplify a bit 'qede_rx_build_skb()'Christophe JAILLET1-2/+1
Use 'skb_put_data()' instead of rewritting it. This improves readability. Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-21net: stmmac: selftest: avoid large stack usageArnd Bergmann2-13/+6
Putting a struct stmmac_rss object on the stack is a bad idea, as it exceeds the warning limit for a stack frame on 32-bit architectures: drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1221:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l3filt' [-Werror,-Wframe-larger-than=] drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1338:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l4filt' [-Werror,-Wframe-larger-than=] As the object is the trivial empty case, change the called function to accept a NULL pointer to mean the same thing and remove the large variable in the two callers. Fixes: 4647e021193d ("net: stmmac: selftests: Add selftest for L3/L4 Filters") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Jose Abreu <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-21net: dsa: sja1105: Add dependency for NET_DSA_SJA1105_TASMao Wenan1-0/+1
If CONFIG_NET_DSA_SJA1105_TAS=y and CONFIG_NET_SCH_TAPRIO=n, below error can be found: drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio': sja1105_tas.c:(.text+0x318): undefined reference to `taprio_offload_free' sja1105_tas.c:(.text+0x590): undefined reference to `taprio_offload_get' drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown': sja1105_tas.c:(.text+0x610): undefined reference to `taprio_offload_free' make: *** [vmlinux] Error 1 sja1105_tas needs tc-taprio, so this patch add the dependency for it. Fixes: 317ab5b86c8e ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Mao Wenan <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-21net: remove netx ethernet driverArnd Bergmann3-509/+0
The ARM netx platform got removed in 5.3, so this driver is now useless. Reported-by: Uwe Kleine-König <[email protected]> Cc: Sascha Hauer <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-21net/phy: fix DP83865 10 Mbps HDX loopback disable functionPeter Mamonov1-3/+6
According to the DP83865 datasheet "the 10 Mbps HDX loopback can be disabled in the expanded memory register 0x1C0.1". The driver erroneously used bit 0 instead of bit 1. Fixes: 4621bf129856 ("phy: Add file missed in previous commit.") Signed-off-by: Peter Mamonov <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-21usbnet: ignore endpoints with invalid wMaxPacketSizeBjørn Mork1-0/+5
Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the drivers more robust against invalid and meaningless descriptors. The wMaxPacketSize of these endpoints are used for memory allocations and as divisors in many usbnet minidrivers. Avoiding zero is therefore critical. Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-21cdc_ncm: fix divide-by-zero caused by invalid wMaxPacketSizeBjørn Mork1-1/+5
Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the driver more robust against invalid and meaningless descriptors. The wMaxPacketSize of the out pipe is used as divisor. So this change fixes a divide-by-zero bug. Reported-by: [email protected] Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-7/+4
Pull RDMA subsystem updates from Jason Gunthorpe: "This cycle mainly saw lots of bug fixes and clean up code across the core code and several drivers, few new functional changes were made. - Many cleanup and bug fixes for hns - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed, bnxt_re, efa - Share the query_port code between all the iWarp drivers - General rework and cleanup of the ODP MR umem code to fit better with the mmu notifier get/put scheme - Support rdma netlink in non init_net name spaces - mlx5 support for XRC devx and DC ODP" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits) RDMA: Fix double-free in srq creation error flow RDMA/efa: Fix incorrect error print IB/mlx5: Free mpi in mp_slave mode IB/mlx5: Use the original address for the page during free_pages RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp" RDMA/hns: Package operations of rq inline buffer into separate functions RDMA/hns: Optimize cmd init and mode selection for hip08 IB/hfi1: Define variables as unsigned long to fix KASAN warning IB/{rdmavt, hfi1, qib}: Add a counter for credit waits IB/hfi1: Add traces for TID RDMA READ RDMA/siw: Relax from kmap_atomic() use in TX path IB/iser: Support up to 16MB data transfer in a single command RDMA/siw: Fix page address mapping in TX path RDMA: Fix goto target to release the allocated memory RDMA/usnic: Avoid overly large buffers on stack RDMA/odp: Add missing cast for 32 bit RDMA/hns: Use devm_platform_ioremap_resource() to simplify code Documentation/infiniband: update name of some functions RDMA/cma: Fix false error message RDMA/hns: Fix wrong assignment of qp_access_flags ...
2019-09-21zd1211rw: zd_usb: Use "%zu" to format size_tGeert Uytterhoeven1-1/+1
On 32-bit: drivers/net/wireless/zydas/zd1211rw/zd_usb.c: In function ‘check_read_regs’: drivers/net/wireless/zydas/zd1211rw/zd_def.h:18:25: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘size_t’ {aka ‘unsigned int’} [-Wformat=] dev_printk(level, dev, "%s() " fmt, __func__, ##args) ^~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_def.h:22:4: note: in expansion of macro ‘dev_printk_f’ dev_printk_f(KERN_DEBUG, dev, fmt, ## args) ^~~~~~~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1635:3: note: in expansion of macro ‘dev_dbg_f’ dev_dbg_f(zd_usb_dev(usb), ^~~~~~~~~ drivers/net/wireless/zydas/zd1211rw/zd_usb.c:1636:51: note: format string is defined here "error: actual length %d less than expected %ld\n", ~~^ %d Fixes: 84b0b66352470e64 ("zd1211rw: zd_usb: Use struct_size() helper") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-21rtw88: pci: release tx skbs DMAed when stopYan-Hsuan Chuang1-0/+12
Interrupt is disabled to stop PCI, which means the skbs queued for each TX ring will not be released via DMA interrupt. To avoid those skbs remained being left in the skb queue until PCI has been removed, driver needs to release skbs by itself. Signed-off-by: Yan-Hsuan Chuang <[email protected]> Reviewed-by: Brian Norris <[email protected]> Tested-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-21rtw88: pci: extract skbs free routine for trx ringsYan-Hsuan Chuang1-10/+26
These skbs free routines could be used when driver wants to stop PCI bus, because some of the skbs remained in the queue may not have been returned via DMA interrupt. Signed-off-by: Yan-Hsuan Chuang <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-20Merge tag 'kbuild-v5.4' of ↵Linus Torvalds14-27/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add modpost warn exported symbols marked as 'static' because 'static' and EXPORT_SYMBOL is an odd combination - break the build early if gold linker is used - optimize the Bison rule to produce .c and .h files by a single pattern rule - handle PREEMPT_RT in the module vermagic and UTS_VERSION - warn CONFIG options leaked to the user-space except existing ones - make single targets work properly - rebuild modules when module linker scripts are updated - split the module final link stage into scripts/Makefile.modfinal - fix the missed error code in merge_config.sh - improve the error message displayed on the attempt of the O= build in unclean source tree - remove 'clean-dirs' syntax - disable -Wimplicit-fallthrough warning for Clang - add CONFIG_CC_OPTIMIZE_FOR_SIZE_O3 for ARC - remove ARCH_{CPP,A,C}FLAGS variables - add $(BASH) to run bash scripts - change *CFLAGS_<basetarget>.o to take the relative path to $(obj) instead of the basename - stop suppressing Clang's -Wunused-function warnings when W=1 - fix linux/export.h to avoid genksyms calculating CRC of trimmed exported symbols - misc cleanups * tag 'kbuild-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (63 commits) genksyms: convert to SPDX License Identifier for lex.l and parse.y modpost: use __section in the output to *.mod.c modpost: use MODULE_INFO() for __module_depends export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols export.h: remove defined(__KERNEL__), which is no longer needed kbuild: allow Clang to find unused static inline functions for W=1 build kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN kbuild: refactor scripts/Makefile.extrawarn merge_config.sh: ignore unwanted grep errors kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj) modpost: add NOFAIL to strndup modpost: add guid_t type definition kbuild: add $(BASH) to run scripts with bash-extension kbuild: remove ARCH_{CPP,A,C}FLAGS kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC kbuild: Do not enable -Wimplicit-fallthrough for clang for now kbuild: clean up subdir-ymn calculation in Makefile.clean kbuild: remove unneeded '+' marker from cmd_clean kbuild: remove clean-dirs syntax kbuild: check clean srctree even earlier ...
2019-09-19ibmvnic: Warn unknown speed message only when carrier is presentMurilo Fossa Vicentini1-3/+4
With commit 0655f9943df2 ("net/ibmvnic: Update carrier state after link state change") we are now able to detect when the carrier is properly present in the device, so only report an unexpected unknown speed when it is properly detected. Unknown speed is expected to be seen by the device in case the backing device has no link detected. Reported-by: Abdul Haleem <[email protected]> Tested-by: Abdul Haleem <[email protected]> Signed-off-by: Murilo Fossa Vicentini <[email protected]> Reviewed-by: Thomas Falcon <[email protected]>
2019-09-19ionic: Remove unnecessary ternary operator in ionic_debugfs_add_identNathan Chancellor1-1/+1
clang warns: ../drivers/net/ethernet/pensando/ionic/ionic_debugfs.c:60:37: warning: expression result unused [-Wunused-value] ionic, &identity_fops) ? 0 : -EOPNOTSUPP; ^~~~~~~~~~~ 1 warning generated. The return value of debugfs_create_file does not need to be checked [1] and the function returns void so get rid of the ternary operator, it is unnecessary. [1]: https://lore.kernel.org/linux-mm/[email protected]/ Fixes: fbfb8031533c ("ionic: Add hardware init and device commands") Link: https://github.com/ClangBuiltLinux/linux/issues/658 Signed-off-by: Nathan Chancellor <[email protected]> Acked-by: Shannon Nelson <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]>
2019-09-19iwlwifi: mvm: fix build w/o CONFIG_THERMALJohannes Berg1-2/+7
Without CONFIG_THERMAL, the driver fails to link as it calls iwl_mvm_send_temp_report_ths_cmd() unconditionally. Fix this by making that function available, but do almost nothing but send the empty firmware command to enable CT-kill reporting. While at it, also fix that function itself to not error out when the thermal zone hasn't been initialized, but instead just send the empty firmware command in this case as well. Fixes: 242d9c8b9a93 ("iwlwifi: mvm: use FW thermal monitoring regardless of CONFIG_THERMAL") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-09-19ieee802154: atusb: fix use-after-free at disconnectJohan Hovold1-1/+2
The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Cc: stable <[email protected]> # 4.2 Cc: Alexander Aring <[email protected]> Reported-by: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Stefan Schmidt <[email protected]>
2019-09-19usbnet: sanity checking of packet sizes and device mtuOliver Neukum1-0/+3
After a reset packet sizes and device mtu can change and need to be reevaluated to calculate queue sizes. Malicious devices can set this to zero and we divide by it. Introduce sanity checking. Reported-and-tested-by: [email protected] Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds966-39063/+82871
Pull networking updates from David Miller: 1) Support IPV6 RA Captive Portal Identifier, from Maciej Żenczykowski. 2) Use bio_vec in the networking instead of custom skb_frag_t, from Matthew Wilcox. 3) Make use of xmit_more in r8169 driver, from Heiner Kallweit. 4) Add devmap_hash to xdp, from Toke Høiland-Jørgensen. 5) Support all variants of 5750X bnxt_en chips, from Michael Chan. 6) More RTNL avoidance work in the core and mlx5 driver, from Vlad Buslov. 7) Add TCP syn cookies bpf helper, from Petar Penkov. 8) Add 'nettest' to selftests and use it, from David Ahern. 9) Add extack support to drop_monitor, add packet alert mode and support for HW drops, from Ido Schimmel. 10) Add VLAN offload to stmmac, from Jose Abreu. 11) Lots of devm_platform_ioremap_resource() conversions, from YueHaibing. 12) Add IONIC driver, from Shannon Nelson. 13) Several kTLS cleanups, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1930 commits) mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared buffer mlxsw: spectrum: Register CPU port with devlink mlxsw: spectrum_buffers: Prevent changing CPU port's configuration net: ena: fix incorrect update of intr_delay_resolution net: ena: fix retrieval of nonadaptive interrupt moderation intervals net: ena: fix update of interrupt moderation register net: ena: remove all old adaptive rx interrupt moderation code from ena_com net: ena: remove ena_restore_ethtool_params() and relevant fields net: ena: remove old adaptive interrupt moderation code from ena_netdev net: ena: remove code duplication in ena_com_update_nonadaptive_moderation_interval _*() net: ena: enable the interrupt_moderation in driver_supported_features net: ena: reimplement set/get_coalesce() net: ena: switch to dim algorithm for rx adaptive interrupt moderation net: ena: add intr_moder_rx_interval to struct ena_com_dev and use it net: phy: adin: implement Energy Detect Powerdown mode via phy-tunable ethtool: implement Energy Detect Powerdown support via phy-tunable xen-netfront: do not assume sk_buff_head list is empty in error handling s390/ctcm: Delete unnecessary checks before the macro call “dev_kfree_skb” net: ena: don't wake up tx queue when down drop_monitor: Better sanitize notified packets ...
2019-09-17Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds2-15/+2
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-17Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-6/+11
Pull in bug fixes from 'net' tree for the merge window. Signed-off-by: David S. Miller <[email protected]>
2019-09-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds9-2870/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...
2019-09-16Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-28/+19
Pull ARM SoC platform updates from Arnd Bergmann: "The main change this time around is a cleanup of some of the oldest platforms based on the XScale and ARM9 CPU cores, which are between 10 and 20 years old. The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel IOP33x/IOP13xx platforms are removed after we determined that nobody is using them any more. The TI Davinci and NXP LPC32xx platforms on the other hand are still in active use and are converted to the ARCH_MULTIPLATFORM build, meaning that we can compile a kernel that works on these along with most other ARMv5 platforms. Changes toward that goal are also merged for IOP32x, but additional work is needed to complete this. Patches for the remaining ARMv5 platforms have started but need more work and some testing. Support for the new ASpeed AST2600 gets added, this is based on the Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and ARMv6 chips in the same family. Other changes include a cleanup of the ST-Ericsson ux500 platform and the move of the TI Davinci platform to a new clocksource driver" [ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being buildable on other platforms through COMPILE_TEST, but that causes new warnings that I most definitely do not want to see during the merge window as that could hide other issues. So the COMPILE_TEST option got disabled for them again - Linus ] * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build ARM: davinci: support multiplatform build for ARM v5 arm64: exynos: Enable exynos-chipid driver ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init() ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2 ARM: davinci: dm646x: Fix a typo in the comment ARM: davinci: dm646x: switch to using the clocksource driver ARM: davinci: dm644x: switch to using the clocksource driver ARM: aspeed: Enable SMP boot ARM: aspeed: Add ASPEED AST2600 architecture ARM: aspeed: Select timer in each SoC dt-bindings: arm: cpus: Add ASPEED SMP ARM: imx: stop adjusting ar8031 phy tx delay mailmap: map old company name to new one @microchip.com MAINTAINERS: at91: remove the TC entry MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91 MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c ARM: debug-ll: Add support for r7s9210 ...
2019-09-16mlxsw: spectrum_buffers: Add the ability to query the CPU port's shared bufferShalom Toledo1-8/+33
While debugging packet loss towards the CPU, it is useful to be able to query the CPU port's shared buffer quotas and occupancy. Since the CPU port has no ingress buffers, all the shared buffers ingress information will be cleared. Signed-off-by: Shalom Toledo <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.