aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2019-10-14net: aquantia: when cleaning hw cache it should be toggledIgor Russkikh4-6/+53
>From HW specification to correctly reset HW caches (this is a required workaround when stopping the device), register bit should actually be toggled. It was previosly always just set. Due to the way driver stops HW this never actually caused any issues, but it still may, so cleaning this up. Fixes: 7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after driver unbind") Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-14net: aquantia: temperature retrieval fixIgor Russkikh1-1/+1
Chip temperature is a two byte word, colocated internally with cable length data. We do all readouts from HW memory by dwords, thus we should clear extra high bytes, otherwise temperature output gets weird as soon as we attach a cable to the NIC. Fixes: 8f8940118654 ("net: aquantia: add infrastructure to readout chip temperature") Tested-by: Holger Hoffstätte <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-14ath10k: fix latency issue for QCA988xMiaoqing Pan1-6/+9
(kvalo: cherry picked from commit 1340cc631bd00431e2f174525c971f119df9efa1 in wireless-drivers-next to wireless-drivers as this a frequently reported regression) Bad latency is found on QCA988x, the issue was introduced by commit 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug"). If uart_pin_workaround is false, this change will set uart pin even if uart_print is false. Tested HW: QCA9880 Tested FW: 10.2.4-1.0-00037 Fixes: 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug") Signed-off-by: Miaoqing Pan <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-10-13netdevsim: Fix error handling in nsim_fib_init and nsim_fib_exitYueHaibing1-1/+2
In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return. In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free: BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim] Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499 CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work [ipv6] Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x380 mm/kasan/report.c:351 __kasan_report+0x149/0x18d mm/kasan/report.c:482 kasan_report+0xe/0x20 mm/kasan/common.c:618 nsim_fib_event_nb+0x342/0x570 [netdevsim] notifier_call_chain+0x52/0xf0 kernel/notifier.c:95 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30 call_fib6_entry_notifiers+0xc1/0x100 [ipv6] fib6_add+0x92e/0x1b10 [ipv6] __ip6_ins_rt+0x40/0x60 [ipv6] ip6_ins_rt+0x84/0xb0 [ipv6] __ipv6_ifa_notify+0x4b6/0x550 [ipv6] ipv6_ifa_notify+0xa5/0x180 [ipv6] addrconf_dad_completed+0xca/0x640 [ipv6] addrconf_dad_work+0x296/0x960 [ipv6] process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269 worker_thread+0x5c/0x670 kernel/workqueue.c:2415 kthread+0x1d7/0x200 kernel/kthread.c:255 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Allocated by task 3388: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:748 [inline] ops_init+0xa9/0x220 net/core/net_namespace.c:127 __register_pernet_operations net/core/net_namespace.c:1135 [inline] register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253 nsim_fib_init+0x12/0x70 [netdevsim] veth_get_link_ksettings+0x2b/0x50 [veth] do_one_initcall+0xd4/0x454 init/main.c:939 do_init_module+0xe0/0x330 kernel/module.c:3490 load_module+0x3c2f/0x4620 kernel/module.c:3841 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3534: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1474 [inline] slab_free mm/slub.c:3016 [inline] kfree+0xe9/0x2d0 mm/slub.c:3957 ops_free net/core/net_namespace.c:151 [inline] ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184 ops_free_list net/core/net_namespace.c:182 [inline] __unregister_pernet_operations net/core/net_namespace.c:1165 [inline] unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271 nsim_fib_exit+0x11/0x20 [netdevsim] nsim_module_exit+0x16/0x21 [netdevsim] __do_sys_delete_module kernel/module.c:1015 [inline] __se_sys_delete_module kernel/module.c:958 [inline] __x64_sys_delete_module+0x244/0x330 kernel/module.c:958 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <[email protected]> Fixes: 59c84b9fcf42 ("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-13net/ibmvnic: Fix EOI when running in XIVE mode.Cédric Le Goater1-5/+3
pSeries machines on POWER9 processors can run with the XICS (legacy) interrupt mode or with the XIVE exploitation interrupt mode. These interrupt contollers have different interfaces for interrupt management : XICS uses hcalls and XIVE loads and stores on a page. H_EOI being a XICS interface the enable_scrq_irq() routine can fail when the machine runs in XIVE mode. Fix that by calling the EOI handler of the interrupt chip. Fixes: f23e0643cd0b ("ibmvnic: Clear pending interrupt after device reset") Signed-off-by: Cédric Le Goater <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-13net: lpc_eth: avoid resetting twiceAlexandre Belloni1-3/+0
__lpc_eth_shutdown is called after __lpc_eth_reset but it is already calling __lpc_eth_reset. Avoid resetting the IP twice. Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-10r8169: fix jumbo packet handling on resume from suspendHeiner Kallweit1-24/+11
Mariusz reported that invalid packets are sent after resume from suspend if jumbo packets are active. It turned out that his BIOS resets chip settings to non-jumbo on resume. Most chip settings are re-initialized on resume from suspend by calling rtl_hw_start(), so let's add configuring jumbo to this function. There's nothing wrong with the commit marked as fixed, it's just the first one where the patch applies cleanly. Fixes: 7366016d2d4c ("r8169: read common register for PCI commit") Reported-by: Mariusz Bialonczyk <[email protected]> Tested-by: Mariusz Bialonczyk <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-09tun: remove possible false sharing in tun_flow_update()Eric Dumazet1-2/+2
As mentioned in https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE#it-may-improve-performance a C compiler can legally transform if (e->queue_index != queue_index) e->queue_index = queue_index; to : e->queue_index = queue_index; Note that the code using jiffies has no issue, since jiffies has volatile attribute. if (e->updated != jiffies) e->updated = jiffies; Fixes: 83b1bc122cab ("tun: align write-heavy flow entry members to a cache line") Signed-off-by: Eric Dumazet <[email protected]> Cc: Zhang Yu <[email protected]> Cc: Wang Li <[email protected]> Cc: Li RongQing <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-09net: usb: qmi_wwan: add Telit 0x1050 compositionDaniele Palmas1-0/+1
This patch adds support for Telit FN980 0x1050 composition 0x1050: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-09phylink: fix kernel-doc warningsRandy Dunlap1-1/+1
Fix kernel-doc warnings in phylink.c: ../drivers/net/phy/phylink.c:595: warning: Function parameter or member 'config' not described in 'phylink_create' ../drivers/net/phy/phylink.c:595: warning: Excess function parameter 'ndev' description in 'phylink_create' Fixes: 8796c8923d9c ("phylink: add documentation for kernel APIs") Signed-off-by: Randy Dunlap <[email protected]> Cc: Russell King <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-09bonding: fix potential NULL deref in bond_update_slave_arrEric Dumazet1-1/+1
syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL. [1] Failed to build slave-array. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039 RSP: 0018:ffff88018fe33678 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000 RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20 RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0 FS: 00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline] [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline] [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline] [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline] [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Cc: Mahesh Bandewar <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-09net: stmmac: fix disabling flexible PPS outputAntonio Borneo1-0/+1
Accordingly to Synopsys documentation [1] and [2], when bit PPSEN0 in register MAC_PPS_CONTROL is set it selects the functionality command in the same register, otherwise selects the functionality control. Command functionality is required to either enable (command 0x2) and disable (command 0x5) the flexible PPS output, but the bit PPSEN0 is currently set only for enabling. Set the bit PPSEN0 to properly disable flexible PPS output. Tested on STM32MP15x, based on dwmac 4.10a. [1] DWC Ethernet QoS Databook 4.10a October 2014 [2] DWC Ethernet QoS Databook 5.00a September 2017 Signed-off-by: Antonio Borneo <[email protected]> Fixes: 9a8a02c9d46d ("net: stmmac: Add Flexible PPS support") Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-09net: stmmac: fix length of PTP clock's name stringAntonio Borneo1-1/+1
The field "name" in struct ptp_clock_info has a fixed size of 16 chars and is used as zero terminated string by clock_name_show() in drivers/ptp/ptp_sysfs.c The current initialization value requires 17 chars to fit also the null termination, and this causes overflow to the next bytes in the struct when the string is read as null terminated: hexdump -C /sys/class/ptp/ptp0/clock_name 00000000 73 74 6d 6d 61 63 5f 70 74 70 5f 63 6c 6f 63 6b |stmmac_ptp_clock| 00000010 a0 ac b9 03 0a |.....| where the extra 4 bytes (excluding the newline) after the string represent the integer 0x03b9aca0 = 62500000 assigned to the field "max_adj" that follows "name" in the same struct. There is no strict requirement for the "name" content and in the comment in ptp_clock_kernel.h it's reported it should just be 'A short "friendly name" to identify the clock'. Replace it with "stmmac ptp". Signed-off-by: Antonio Borneo <[email protected]> Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-7/+1
Pull rdma fixes from Jason Gunthorpe: "The usual collection of driver bug fixes, and a few regressions from the merge window. Nothing particularly worrisome. - Various missed memory frees and error unwind bugs - Fix regressions in a few iwarp drivers from 5.4 patches - A few regressions added in past kernels - Squash a number of races in mlx5 ODP code" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Add missing synchronize_srcu() for MW cases RDMA/mlx5: Put live in the correct place for ODP MRs RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcu RDMA/odp: Lift umem_mutex out of ib_umem_odp_unmap_dma_pages() RDMA/mlx5: Fix a race with mlx5_ib_update_xlt on an implicit MR RDMA/mlx5: Do not allow rereg of a ODP MR IB/core: Fix wrong iterating on ports RDMA/nldev: Reshuffle the code to avoid need to rebind QP in error path RDMA/cxgb4: Do not dma memory off of the stack RDMA/cm: Fix memory leak in cm_add/remove_one RDMA/core: Fix an error handling path in 'res_get_common_doit()' RDMA/i40iw: Associate ibdev to netdev before IB device registration RDMA/iwcm: Fix a lock inversion issue RDMA/iw_cxgb4: fix SRQ access from dump_qp() RDMA/hfi1: Prevent memory leak in sdma_init RDMA/core: Fix use after free and refcnt leak on ndev in_device in iwarp_query_port RDMA/siw: Fix serialization issue in write_space() RDMA/vmw_pvrdma: Free SRQ only once
2019-10-09iwlwifi: pcie: change qu with jf devices to use qu configurationLuca Coelho1-137/+137
There were a bunch of devices with qu and jf that were loading the configuration with pu and jf, which is wrong. Fix them all accordingly. Additionally, remove 0x1010 and 0x1210 subsytem IDs from the list, since they are obviously wrong, and 0x0044 and 0x0244, which were duplicate. Cc: [email protected] # 5.1+ Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: exclude GEO SAR support for 3168Luca Coelho1-7/+9
We currently support two NICs in FW version 29, namely 7265D and 3168. Out of these, only 7265D supports GEO SAR, so adjust the function that checks for it accordingly. Signed-off-by: Luca Coelho <[email protected]> Fixes: f5a47fae6aa3 ("iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support") Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: pcie: fix memory leaks in iwl_pcie_ctxt_info_gen3_initNavid Emamdoost1-11/+25
In iwl_pcie_ctxt_info_gen3_init there are cases that the allocated dma memory is leaked in case of error. DMA memories prph_scratch, prph_info, and ctxt_info_gen3 are allocated and initialized to be later assigned to trans_pcie. But in any error case before such assignment the allocated memories should be released. First of such error cases happens when iwl_pcie_init_fw_sec fails. Current implementation correctly releases prph_scratch. But in two sunsequent error cases where dma_alloc_coherent may fail, such releases are missing. This commit adds release for prph_scratch when allocation for prph_info fails, and adds releases for prph_scratch and prph_info when allocation for ctxt_info_gen3 fails. Fixes: 2ee824026288 ("iwlwifi: pcie: support context information for 22560 devices") Signed-off-by: Navid Emamdoost <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: dbg_ini: fix memory leak in alloc_sgtableNavid Emamdoost1-0/+1
In alloc_sgtable if alloc_page fails, the alocated table should be released. Signed-off-by: Navid Emamdoost <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: pcie: fix rb_allocator workqueue allocationJohannes Berg1-4/+11
We don't handle failures in the rb_allocator workqueue allocation correctly. To fix that, move the code earlier so the cleanup is easier and we don't have to undo all the interrupt allocations in this case. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: pcie: fix indexing in command dump for new HWJohannes Berg1-2/+8
We got a crash in iwl_trans_pcie_get_cmdlen(), while the TFD was being accessed to sum up the lengths. We want to access the TFD here, which is the information for the hardware. We always only allocate 32 buffers for the cmd queue, but on newer hardware (using TFH) we can also allocate only a shorter hardware array, also only 32 TFDs. Prior to the TFH, we had to allocate a bigger TFD array but would make those point to a smaller set of buffers. Additionally, now max_tfd_queue_size is up to 65536, so we can access *way* out of bounds of a really only 32-entry array, so it crashes. Fix this by making the TFD index depend on which hardware we are using right now. While changing the calculation, also fix it to not use void ptr arithmetic, but cast to u8 * before. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: mvm: fix race in sync rx queue notificationNaftali Goldstein1-4/+5
Consider the following flow: 1. Driver starts to sync the rx queues due to a delba. mvm->queue_sync_cookie=1. This rx-queues-sync is synchronous, so it doesn't increment the cookie until all rx queues handle the notification from FW. 2. During this time, driver starts to sync rx queues due to nssn sync required. The cookie's value is still 1, but it doesn't matter since this rx-queue-sync is non-synchronous so in the notification handler the cookie is ignored. What _does_ matter is that this flow increments the cookie to 2 immediately. Remember though that the FW won't start servicing this command until it's done with the previous one. 3. FW is still handling the first command, so it sends a notification with internal_notif->sync=1, and internal_notif->cookie=0, which triggers a WARN_ONCE. The solution for this race is to only use the mvm->queue_sync_cookie in case of a synchronous sync-rx-queues. This way in step 2 the cookie's value won't change so we avoid the WARN. The commit in the "fixes" field is the first commit to introduce non-synchronous sending of this command to FW. Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues") Signed-off-by: Naftali Goldstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: mvm: force single phy initHaim Dreyfuss1-0/+3
The PHY is initialized during device initialization, but devices with the tx_siso_diversity flag set need to send PHY_CONFIGURATION_CMD first, otherwise the PHY would be reinitialized, causing a SYSASSERT. To fix this, use a bit that tells the FW not to complete the PHY initialization before a PHY_CONFIGURATION_CMD is received. Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: fix ACPI table revision checksLuca Coelho2-10/+24
We can't check for the ACPI table revision validity in the same if where we check if the package was read correctly, because we return PTR_ERR(pkg) and if the table is not valid but the pointer is, we would return a valid pointer as an error. Fix that by moving the table checks to a separate if and return -EINVAL if it's not valid. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-09iwlwifi: don't access trans_cfg via cfgLuca Coelho1-6/+6
We copy cfg->trans to trans->trans_cfg at the very beginning, so don't try to access it via cfg->trans anymore, because the cfg may be unset in later cases. Signed-off-by: Luca Coelho <[email protected]>
2019-10-08Merge tag 'mac80211-for-davem-2019-10-08' of ↵Jakub Kicinski1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A number of fixes: * allow scanning when operating on radar channels in ETSI regdomains * accept deauth frames in IBSS - we have code to parse and handle them, but were dropping them early * fix an allocation failure path in hwsim * fix a failure path memory leak in nl80211 FTM code * fix RCU handling & locking in multi-BSSID parsing * reject malformed SSID in mac80211 (this shouldn't really be able to happen, but defense in depth) * avoid userspace buffer overrun in ancient wext code if SSID was too long ==================== Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-08net/mlx5: DR, Allow insertion of duplicate rulesAlex Vesker1-6/+4
Duplicate rules were not allowed to be configured with SW steering. This restriction caused failures with the replace rule logic done by upper layers. This fix allows for multiple rules with the same match values, in such case the first inserted rules will match. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-10-08rt2x00: remove input-polldev.h headerDmitry Torokhov1-1/+0
The driver does not use input subsystem so we do not need this header, and it is being removed, so stop pulling it in. Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-10-07ionic: fix stats memory dereferenceShannon Nelson2-10/+21
When the netdev is down, the queues and their debug stats do not exist, so don't try using a pointer to them when when printing the ethtool stats. Fixes: e470355bd96a ("ionic: Add driver stats") Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-06net: stmmac: selftests: Fix L2 Hash Filter testJose Abreu1-2/+2
With the current MAC addresses hard-coded in the test we can get some false positives as we use the Hash Filtering method. Let's change the MAC addresses in the tests to be unique when hashed. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-06net: stmmac: gmac4+: Not all Unicast addresses may be availableJose Abreu1-1/+1
Some setups may not have all Unicast addresses filters available. Check the number of available filters before trying to setup it. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-06net: stmmac: selftests: Check if filtering is available before runningJose Abreu1-0/+7
We need to check if the number of available Hash Filters is enough to run the test, otherwise we will get false failures. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-06net: dsa: b53: Do not clear existing mirrored port maskFlorian Fainelli1-1/+0
Clearing the existing bitmask of mirrored ports essentially prevents us from capturing more than one port at any given time. This is clearly wrong, do not clear the bitmask prior to setting up the new port. Reported-by: Hubert Feurstein <[email protected]> Fixes: ed3af5fd08eb ("net: dsa: b53: Add support for port mirroring") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04net: qlogic: Fix memory leak in ql_alloc_large_buffersNavid Emamdoost1-0/+1
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb. This skb should be released if pci_dma_mapping_error fails. Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by: Navid Emamdoost <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04net: phy: at803x: use operating parameters from PHY-specific statusRussell King1-0/+69
Read the PHY-specific status register for the current operating mode (speed and duplex) of the PHY. This register reflects the actual mode that the PHY has resolved depending on either the advertisements of autoneg is enabled, or the forced mode if autoneg is disabled. This ensures that phylib's software state always tracks the hardware state. It seems both AR8033 (which uses the AR8031 ID) and AR8035 support this status register. AR8030 is not known at the present time. This patch depends on "net: phy: extract pause mode" and "net: phy: extract link partner advertisement reading". Reported-by: tinywrkb <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Tested-by: tinywrkb <[email protected]> Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04net: phy: extract pause modeRussell King1-7/+13
Extract the update of phylib's software pause mode state from genphy_read_status(), so that we can re-use this functionality with PHYs that have alternative ways to read the negotiation results. Tested-by: tinywrkb <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04net: phy: extract link partner advertisement readingRussell King1-25/+40
Move reading the link partner advertisement out of genphy_read_status() into its own separate function. This will allow re-use of this code by PHY drivers that are able to read the resolved status from the PHY. Tested-by: tinywrkb <[email protected]> Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04net: phy: fix write to mii-ctrl1000 registerRussell King1-0/+5
When userspace writes to the MII_ADVERTISE register, we update phylib's advertising mask and trigger a renegotiation. However, writing to the MII_CTRL1000 register, which contains the gigabit advertisement, does neither. This can lead to phylib's copy of the advertisement becoming de-synced with the values in the PHY register set, which can result in incorrect negotiation resolution. Fixes: 5502b218e001 ("net: phy: use phy_resolve_aneg_linkmode in genphy_read_status") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04net: phy: allow for reset line to be tied to a sleepy GPIO controllerAndrea Merello1-1/+1
mdio_device_reset() makes use of the atomic-pretending API flavor for handling the PHY reset GPIO line. I found no hint that mdio_device_reset() is called from atomic context and indeed it uses usleep_range() since long time, so I would assume that it is OK to sleep there. This patch switch to gpiod_set_value_cansleep() in mdio_device_reset(). This is relevant if e.g. the PHY reset line is tied to a I2C GPIO controller. This has been tested on a ZynqMP board running an upstream 4.19 kernel and then hand-ported on current kernel tree. Signed-off-by: Andrea Merello <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04r8152: Set macpassthru in reset_resume callbackKai-Heng Feng1-2/+1
r8152 may fail to establish network connection after resume from system suspend. If the USB port connects to r8152 lost its power during system suspend, the MAC address was written before is lost. The reason is that The MAC address doesn't get written again in its reset_resume callback. So let's set MAC address again in reset_resume callback. Also remove unnecessary lock as no other locking attempt will happen during reset_resume. Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04cxgb4:Fix out-of-bounds MSI-X info array accessVishal Kulkarni1-3/+6
When fetching free MSI-X vectors for ULDs, check for the error code before accessing MSI-X info array. Otherwise, an out-of-bounds access is attempted, which results in kernel panic. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <[email protected]> Signed-off-by: Vishal Kulkarni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04qmi_wwan: add support for Cinterion CLS8 devicesReinhard Speyerer1-0/+1
Add support for Cinterion CLS8 devices. Use QMI_QUIRK_SET_DTR as required for Qualcomm MDM9x07 chipsets. T: Bus=01 Lev=03 Prnt=05 Port=01 Cnt=02 Dev#= 25 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00b0 Rev= 3.18 S: Manufacturer=GEMALTO S: Product=USB Modem C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Reinhard Speyerer <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-04RDMA/mlx5: Add missing synchronize_srcu() for MW casesJason Gunthorpe1-7/+1
While MR uses live as the SRCU 'update', the MW case uses the xarray directly, xa_erase() causes the MW to become inaccessible to the pagefault thread. Thus whenever a MW is removed from the xarray we must synchronize_srcu() before freeing it. This must be done before freeing the mkey as re-use of the mkey while the pagefault thread is using the stale mkey is undesirable. Add the missing synchronizes to MW and DEVX indirect mkey and delete the bogus protection against double destroy in mlx5_core_destroy_mkey() Fixes: 534fd7aac56a ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP") Fixes: 6aec21f6a832 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Artemy Kovalyov <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2019-10-04mac80211_hwsim: fix incorrect dev_alloc_name failure gotoMichael Vassernis1-1/+1
If dev_alloc_name fails, hwsim_mon's memory allocated in alloc_netdev needs to be freed. Change goto command in dev_alloc_name failure to out_free_mon in order to perform free_netdev. Signed-off-by: Michael Vassernis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2019-10-02net: stmmac: Avoid deadlock on suspend/resumeThierry Reding1-4/+6
The stmmac driver will try to acquire its private mutex during suspend via phylink_resolve() -> stmmac_mac_link_down() -> stmmac_eee_init(). However, the phylink configuration is updated with the private mutex held already, which causes a deadlock during suspend. Fix this by moving the phylink configuration updates out of the region of code protected by the private mutex. Fixes: 19e13cb27b99 ("net: stmmac: Hold rtnl lock in suspend/resume callbacks") Suggested-by: Bitan Biswas <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-02net: hisilicon: Fix usage of uninitialized variable in function ↵Yizhuo1-1/+5
mdio_sc_cfg_reg_write() In function mdio_sc_cfg_reg_write(), variable "reg_value" could be uninitialized if regmap_read() fails. However, "reg_value" is used to decide the control flow later in the if statement, which is potentially unsafe. Signed-off-by: Yizhuo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller5-10/+10
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Remove the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). Patch from Florian Westphal. 2) Fix deadlock in nft_connlimit between packet path updates and the garbage collector. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-10-02net: dsa: sja1105: Fix sleeping while atomic in .port_hwtstamp_setVladimir Oltean1-8/+11
Currently this stack trace can be seen with CONFIG_DEBUG_ATOMIC_SLEEP=y: [ 41.568348] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:909 [ 41.576757] in_atomic(): 1, irqs_disabled(): 0, pid: 208, name: ptp4l [ 41.583212] INFO: lockdep is turned off. [ 41.587123] CPU: 1 PID: 208 Comm: ptp4l Not tainted 5.3.0-rc6-01445-ge950f2d4bc7f-dirty #1827 [ 41.599873] [<c0313d7c>] (unwind_backtrace) from [<c030e13c>] (show_stack+0x10/0x14) [ 41.607584] [<c030e13c>] (show_stack) from [<c1212d50>] (dump_stack+0xd4/0x100) [ 41.614863] [<c1212d50>] (dump_stack) from [<c037dfc8>] (___might_sleep+0x1c8/0x2b4) [ 41.622574] [<c037dfc8>] (___might_sleep) from [<c122ea90>] (__mutex_lock+0x48/0xab8) [ 41.630368] [<c122ea90>] (__mutex_lock) from [<c122f51c>] (mutex_lock_nested+0x1c/0x24) [ 41.638340] [<c122f51c>] (mutex_lock_nested) from [<c0c6fe08>] (sja1105_static_config_reload+0x30/0x27c) [ 41.647779] [<c0c6fe08>] (sja1105_static_config_reload) from [<c0c7015c>] (sja1105_hwtstamp_set+0x108/0x1cc) [ 41.657562] [<c0c7015c>] (sja1105_hwtstamp_set) from [<c0feb650>] (dev_ifsioc+0x18c/0x330) [ 41.665788] [<c0feb650>] (dev_ifsioc) from [<c0febbd8>] (dev_ioctl+0x320/0x6e8) [ 41.673064] [<c0febbd8>] (dev_ioctl) from [<c0f8b1f4>] (sock_ioctl+0x334/0x5e8) [ 41.680340] [<c0f8b1f4>] (sock_ioctl) from [<c05404a8>] (do_vfs_ioctl+0xb0/0xa10) [ 41.687789] [<c05404a8>] (do_vfs_ioctl) from [<c0540e3c>] (ksys_ioctl+0x34/0x58) [ 41.695151] [<c0540e3c>] (ksys_ioctl) from [<c0301000>] (ret_fast_syscall+0x0/0x28) [ 41.702768] Exception stack(0xe8495fa8 to 0xe8495ff0) [ 41.707796] 5fa0: beff4a8c 00000001 00000011 000089b0 beff4a8c beff4a80 [ 41.715933] 5fc0: beff4a8c 00000001 0000000c 00000036 b6fa98c8 004e19c1 00000001 00000000 [ 41.724069] 5fe0: 004dcedc beff4a6c 004c0738 b6e7af4c [ 41.729860] BUG: scheduling while atomic: ptp4l/208/0x00000002 [ 41.735682] INFO: lockdep is turned off. Enabling RX timestamping will logically disturb the fastpath (processing of meta frames). Replace bool hwts_rx_en with a bit that is checked atomically from the fastpath and temporarily unset from the sleepable context during a change of the RX timestamping process (a destructive operation anyways, requires switch reset). If found unset, the fastpath (net/dsa/tag_sja1105.c) will just drop any received meta frame and not take the meta_lock at all. Fixes: a602afd200f5 ("net: dsa: sja1105: Expose PTP timestamping ioctls to userspace") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-02net: dsa: sja1105: Initialize the meta_lockVladimir Oltean1-0/+1
Otherwise, with CONFIG_DEBUG_SPINLOCK=y, this stack trace gets printed when enabling RX timestamping and receiving a PTP frame: [ 318.537078] INFO: trying to register non-static key. [ 318.542040] the code is fine but needs lockdep annotation. [ 318.547500] turning off the locking correctness validator. [ 318.552972] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-13257-g0825b0669811-dirty #1962 [ 318.561283] Hardware name: Freescale LS1021A [ 318.565566] [<c03144bc>] (unwind_backtrace) from [<c030e164>] (show_stack+0x10/0x14) [ 318.573289] [<c030e164>] (show_stack) from [<c11b9f50>] (dump_stack+0xd4/0x100) [ 318.580579] [<c11b9f50>] (dump_stack) from [<c03b9b40>] (register_lock_class+0x728/0x734) [ 318.588731] [<c03b9b40>] (register_lock_class) from [<c03b60c4>] (__lock_acquire+0x78/0x25cc) [ 318.597227] [<c03b60c4>] (__lock_acquire) from [<c03b8ef8>] (lock_acquire+0xd8/0x234) [ 318.605033] [<c03b8ef8>] (lock_acquire) from [<c11db934>] (_raw_spin_lock+0x44/0x54) [ 318.612755] [<c11db934>] (_raw_spin_lock) from [<c1164370>] (sja1105_rcv+0x1f8/0x4e8) [ 318.620561] [<c1164370>] (sja1105_rcv) from [<c115d7cc>] (dsa_switch_rcv+0x80/0x204) [ 318.628283] [<c115d7cc>] (dsa_switch_rcv) from [<c0f58c80>] (__netif_receive_skb_one_core+0x50/0x6c) [ 318.637386] [<c0f58c80>] (__netif_receive_skb_one_core) from [<c0f58f04>] (netif_receive_skb_internal+0xac/0x264) [ 318.647611] [<c0f58f04>] (netif_receive_skb_internal) from [<c0f59e98>] (napi_gro_receive+0x1d8/0x338) [ 318.656887] [<c0f59e98>] (napi_gro_receive) from [<c0c298a4>] (gfar_clean_rx_ring+0x328/0x724) [ 318.665472] [<c0c298a4>] (gfar_clean_rx_ring) from [<c0c29e60>] (gfar_poll_rx_sq+0x34/0x94) [ 318.673795] [<c0c29e60>] (gfar_poll_rx_sq) from [<c0f5b40c>] (net_rx_action+0x128/0x4f8) [ 318.681860] [<c0f5b40c>] (net_rx_action) from [<c03022f0>] (__do_softirq+0x148/0x5ac) [ 318.689666] [<c03022f0>] (__do_softirq) from [<c0355af4>] (irq_exit+0x160/0x170) [ 318.697040] [<c0355af4>] (irq_exit) from [<c03c6818>] (__handle_domain_irq+0x60/0xb4) [ 318.704847] [<c03c6818>] (__handle_domain_irq) from [<c07e9440>] (gic_handle_irq+0x58/0x9c) [ 318.713172] [<c07e9440>] (gic_handle_irq) from [<c0301a70>] (__irq_svc+0x70/0x98) [ 318.720622] Exception stack(0xc2001f18 to 0xc2001f60) [ 318.725656] 1f00: 00000001 00000006 [ 318.733805] 1f20: 00000000 c20165c0 ffffe000 c2010cac c2010cf4 00000001 00000000 c2010c88 [ 318.741955] 1f40: c1f7a5a8 00000000 00000000 c2001f68 c03ba140 c030a288 200e0013 ffffffff [ 318.750110] [<c0301a70>] (__irq_svc) from [<c030a288>] (arch_cpu_idle+0x24/0x3c) [ 318.757486] [<c030a288>] (arch_cpu_idle) from [<c038a480>] (do_idle+0x1b8/0x2a4) [ 318.764859] [<c038a480>] (do_idle) from [<c038a94c>] (cpu_startup_entry+0x18/0x1c) [ 318.772407] [<c038a94c>] (cpu_startup_entry) from [<c1e00f10>] (start_kernel+0x4cc/0x4fc) Fixes: 844d7edc6a34 ("net: dsa: sja1105: Add a global sja1105_tagger_data structure") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-02net: dsa: rtl8366: Check VLAN ID and not portsLinus Walleij1-4/+7
There has been some confusion between the port number and the VLAN ID in this driver. What we need to check for validity is the VLAN ID, nothing else. The current confusion came from assigning a few default VLANs for default routing and we need to rewrite that properly. Instead of checking if the port number is a valid VLAN ID, check the actual VLAN IDs passed in to the callback one by one as expected. Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-02mlx5: avoid 64-bit division in dr_icm_pool_mr_create()Michal Kubecek1-1/+2
Recently added code introduces 64-bit division in dr_icm_pool_mr_create() so that build on 32-bit architectures fails with ERROR: "__umoddi3" [drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko] undefined! As the divisor is always a power of 2, we can use bitwise operation instead. Fixes: 29cf8febd185 ("net/mlx5: DR, ICM pool memory allocator") Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.