aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-10-13Merge tag 'net-6.1-rc1' of ↵Linus Torvalds37-71/+199
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and wifi. Current release - regressions: - Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs", it may cause crashes when the qdisc is reconfigured - inet: ping: fix splat due to packet allocation refactoring in inet - tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF due to races when per-netns hash table is used Current release - new code bugs: - eth: adin1110: check in netdev_event that netdev belongs to driver - fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co. Previous releases - regressions: - ipv4: handle attempt to delete multipath route when fib_info contains an nh reference, avoid oob access - wifi: fix handful of bugs in the new Multi-BSSID code - wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer, fix checksum offload - wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) - wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx Previous releases - always broken: - ieee802154: don't warn zero-sized raw_sendmsg() - ipv6: ping: fix wrong checksum for large frames - mctp: prevent double key removal and unref - tcp/udp: fix memory leaks and races around IPV6_ADDRFORM - hv_netvsc: fix race between VF offering and VF association message Misc: - remove -Warray-bounds silencing in the drivers, compilers fixed" * tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits) sunhme: fix an IS_ERR() vs NULL check in probe net: marvell: prestera: fix a couple NULL vs IS_ERR() checks kcm: avoid potential race in kcm_tx_work tcp: Clean up kernel listener's reqsk in inet_twsk_purge() net: phy: micrel: Fixes FIELD_GET assertion openvswitch: add nf_ct_is_confirmed check before assigning the helper tcp: Fix data races around icsk->icsk_af_ops. ipv6: Fix data races around sk->sk_prot. tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct(). udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM). tcp/udp: Fix memory leak in ipv6_renew_options(). mctp: prevent double key removal and unref selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1 netfilter: rpfilter/fib: Populate flowic_l3mdev field selftests: netfilter: Test reverse path filtering net/mlx5: Make ASO poll CQ usable in atomic context tcp: cdg: allow tcp_cdg_release() to be called multiple times inet: ping: fix recent breakage ipv6: ping: fix wrong checksum for large frames net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports ...
2022-10-13sunhme: fix an IS_ERR() vs NULL check in probeDan Carpenter1-2/+2
The devm_request_region() function does not return error pointers, it returns NULL on error. Fixes: 914d9b2711dd ("sunhme: switch to devres") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Link: https://lore.kernel.org/r/Y0bWzJL8JknX8MUf@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-13net: marvell: prestera: fix a couple NULL vs IS_ERR() checksDan Carpenter1-3/+3
The __prestera_nexthop_group_create() function returns NULL on error and the prestera_nexthop_group_get() returns error pointers. Fix these two checks. Fixes: 0a23ae237171 ("net: marvell: prestera: Add router nexthops ABI") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Y0bWq+7DoKK465z8@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-13Merge tag 'wireless-2022-10-13' of ↵Paolo Abeni1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== More wireless fixes for 6.1 This has only the fixes for the scan parsing issues. * tag 'wireless-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: update hidden BSSes to avoid WARN_ON wifi: mac80211: fix crash in beacon protection for P2P-device wifi: mac80211_hwsim: avoid mac80211 warning on bad rate wifi: cfg80211: avoid nontransmitted BSS list corruption wifi: cfg80211: fix BSS refcounting bugs wifi: cfg80211: ensure length byte is present before access wifi: mac80211: fix MBSSID parsing use-after-free wifi: cfg80211/mac80211: reject bad MBSSID elements wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans() ==================== Link: https://lore.kernel.org/r/20221013100522.46346-1-johannes@sipsolutions.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-13Merge branch 'cve-fixes-2022-10-13'Johannes Berg14-23/+49
Pull in the fixes for various scan parsing bugs found by Sönke Huster by fuzzing.
2022-10-12net: phy: micrel: Fixes FIELD_GET assertionDivya Koppera1-4/+5
FIELD_GET() must only be used with a mask that is a compile-time constant. Mark the functions as __always_inline to avoid the problem. Fixes: 21b688dabecb6a ("net: phy: micrel: Cable Diag feature for lan8814 phy") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com> Link: https://lore.kernel.org/r/20221011095437.12580-1-Divya.Koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-12net/mlx5: Make ASO poll CQ usable in atomic contextLeon Romanovsky4-13/+11
Poll CQ functions shouldn't sleep as they are called in atomic context. The following splat appears once the mlx5_aso_poll_cq() is used in such flow. BUG: scheduling while atomic: swapper/17/0/0x00000100 Modules linked in: sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core fuse [last unloaded: mlx5_core] CPU: 17 PID: 0 Comm: swapper/17 Tainted: G W 6.0.0-rc2+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 __schedule_bug.cold+0x47/0x53 __schedule+0x4b6/0x670 ? hrtimer_start_range_ns+0x28d/0x360 schedule+0x50/0x90 schedule_hrtimeout_range_clock+0x98/0x120 ? __hrtimer_init+0xb0/0xb0 usleep_range_state+0x60/0x90 mlx5_aso_poll_cq+0xad/0x190 [mlx5_core] mlx5e_ipsec_aso_update_curlft+0x81/0xb0 [mlx5_core] xfrm_timer_handler+0x6b/0x360 ? xfrm_find_acq_byseq+0x50/0x50 __hrtimer_run_queues+0x139/0x290 hrtimer_run_softirq+0x7d/0xe0 __do_softirq+0xc7/0x272 irq_exit_rcu+0x87/0xb0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:default_idle+0x18/0x20 Code: ae 7d ff ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 8b 05 b5 30 0d 01 85 c0 7e 07 0f 00 2d 0a e3 53 00 fb f4 <c3> 0f 1f 80 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 80 ad 01 00 RSP: 0018:ffff888100883ee0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffff888100849580 RCX: 4000000000000000 RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000008863c RBP: 0000000000000011 R08: 00000064e6977fa9 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 default_idle_call+0x37/0xb0 do_idle+0x1cd/0x1e0 cpu_startup_entry+0x19/0x20 start_secondary+0xfe/0x120 secondary_startup_64_no_verify+0xcd/0xdb </TASK> softirq: huh, entered softirq 8 HRTIMER 00000000a97c08cb with preempt_count 00000100, exited with 00000000? Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-12net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused portsMatthias Schiffer1-1/+4
am65_cpsw_nuss_register_ndevs() skips calling devlink_port_type_eth_set() for ports without assigned netdev, triggering the following warning when DEVLINK_PORT_TYPE_WARN_TIMEOUT elapses after 3600s: Type was not set for devlink port. WARNING: CPU: 0 PID: 129 at net/core/devlink.c:8095 devlink_port_type_warn+0x18/0x30 Fixes: 0680e20af5fb ("net: ethernet: ti: am65-cpsw: Fix devlink port register sequence") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-11Merge tag 'wireless-2022-10-11' of ↵Jakub Kicinski7-19/+31
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.1 First set of fixes for v6.1. Quite a lot of fixes in stack but also for mt76. cfg80211/mac80211 - fix locking error in mac80211's hw addr change - fix TX queue stop for internal TXQs - handling of very small (e.g. STP TCN) packets - two memcpy() hardening fixes - fix probe request 6 GHz capability warning - fix various connection prints - fix decapsulation offload for AP VLAN mt76 - fix rate reporting, LLC packets and receive checksum offload on specific chipsets iwlwifi - fix crash due to list corruption ath11k - fix a compiler warning with GCC 11 and KASAN * tag 'wireless-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warning wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other cases) wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921 wifi: mt76: fix receiving LLC packets on mt7615/mt7915 wifi: nl80211: Split memcpy() of struct nl80211_wowlan_tcp_data_token flexible array wifi: wext: use flex array destination for memcpy() wifi: cfg80211: fix ieee80211_data_to_8023_exthdr handling of small packets wifi: mac80211: netdev compatible TX stop for iTXQ drivers wifi: mac80211: fix decap offload for stations on AP_VLAN interfaces wifi: mac80211: unlock on error in ieee80211_can_powered_addr_change() wifi: mac80211: remove/avoid misleading prints wifi: mac80211: fix probe req HE capabilities access wifi: mac80211: do not drop packets smaller than the LLC-SNAP header on fast-rx wifi: mt76: fix rate reporting / throughput regression on mt7915 and newer ==================== Link: https://lore.kernel.org/r/20221011163123.A093CC433D6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-11wifi: ath11k: mac: fix reading 16 bytes from a region of size 0 warningKalle Valo1-2/+3
Linaro reported stringop-overread warnings in ath11k (this is one of many): drivers/net/wireless/ath/ath11k/mac.c:2238:29: error: 'ath11k_peer_assoc_h_he_limit' reading 16 bytes from a region of size 0 [-Werror=stringop-overread] My further investigation showed that these warnings happen on GCC 11.3 but not with GCC 12.2, and with only the kernel config Linaro provided: https://builds.tuxbuild.com/2F4W7nZHNx3T88RB0gaCZ9hBX6c/config I saw the same warnings both with arm64 and x86_64 builds and KASAN seems to be the reason triggering these warnings with GCC 11. Nobody else has reported this so this seems to be quite rare corner case. I don't know what specific commit started emitting this warning so I can't provide a Fixes tag. The function hasn't been touched for a year. I decided to workaround this by converting the pointer to a new array in stack, and then copying the data to the new array. It's only 16 bytes anyway and this is executed during association, so not in a hotpath. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9 Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYsZ_qypa=jHY_dJ=tqX4515+qrV9n2SWXVDHve826nF7Q@mail.gmail.com/ Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221010160638.20152-1-kvalo@kernel.org
2022-10-11wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue (other ↵Jose Ignacio Tornos Martinez1-0/+2
cases) BUGs like this are still reproducible: [ 31.509616] list_add corruption. prev->next should be next (ffff8f8644242300), but was ffff8f86493fd300. (prev=ffff8f86493fd300). [ 31.521544] ------------[ cut here ]------------ [ 31.526248] kernel BUG at lib/list_debug.c:30! [ 31.530781] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 31.535831] CPU: 1 PID: 626 Comm: wpa_supplicant Not tainted 6.0.0+ #7 [ 31.542450] Hardware name: Dell Inc. Inspiron 660s/0478VN , BIOS A07 08/24/2012 [ 31.550484] RIP: 0010:__list_add_valid.cold+0x3a/0x5b [ 31.555537] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 28 20 69 89 e8 4c e3 fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 d0 1f 69 89 e8 35 e3 fd ff <0f> 0b 4c 89 c1 48 c7 c7 78 1f 69 89 e8 24 e3 fd ff 0f 0b 48 c7 c7 [ 31.574605] RSP: 0018:ffff9f6f00dc3748 EFLAGS: 00010286 [ 31.579990] RAX: 0000000000000075 RBX: ffff8f8644242080 RCX: 0000000000000000 [ 31.587155] RDX: 0000000000000201 RSI: ffffffff8967862d RDI: 00000000ffffffff [ 31.594482] RBP: ffff8f86493fd2e8 R08: 0000000000000000 R09: 00000000ffffdfff [ 31.601735] R10: ffff9f6f00dc3608 R11: ffffffff89f46128 R12: ffff8f86493fd300 [ 31.608986] R13: ffff8f86493fd300 R14: ffff8f8644242300 R15: ffff8f8643dd3f2c [ 31.616151] FS: 00007f3bb9a707c0(0000) GS:ffff8f865a300000(0000) knlGS:0000000000000000 [ 31.624447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 31.630286] CR2: 00007fe3647d5600 CR3: 00000001125a6002 CR4: 00000000000606e0 [ 31.637539] Call Trace: [ 31.639936] <TASK> [ 31.642143] iwl_mvm_mac_wake_tx_queue+0x71/0x90 [iwlmvm] [ 31.647569] ieee80211_queue_skb+0x4b6/0x720 [mac80211] ... So, it is necessary to extend the applied solution with commit 14a3aacf517a9 ("iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue") to all other cases where the station queues are invalidated and the related lists are not emptied. Because, otherwise as before, if some new element is added later to the list in iwl_mvm_mac_wake_tx_queue, it can match with the old one and produce the same commented BUG. That is, in order to avoid this problem completely, we must also remove the related lists for the other cases when station queues are invalidated. Fixes: cfbc6c4c5b91c ("iwlwifi: mvm: support mac80211 TXQs model") Reported-by: Petr Stourac <pstourac@redhat.com> Tested-by: Petr Stourac <pstourac@redhat.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221010081611.145027-1-jtornosm@redhat.com
2022-10-11wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921Felix Fietkau4-7/+10
Checking the relevant rxd bits for the checksum information only indicates if the checksum verification was performed by the hardware and doesn't show actual checksum errors. Checksum errors are indicated in the info field of the DMA descriptor. Fix packets erroneously marked as CHECKSUM_UNNECESSARY by checking the extra bits as well. Those bits are only passed to the driver for MMIO devices at the moment, so limit checksum offload to those. Fixes: 2122dfbfd0bd ("mt76: mt7615: add rx checksum offload support") Fixes: 94244d2ea503 ("mt76: mt7915: add rx checksum offload support") Fixes: 0e75732764e8 ("mt76: mt7921: enable rx csum offload") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005130824.23371-2-nbd@nbd.name
2022-10-11wifi: mt76: fix receiving LLC packets on mt7615/mt7915Felix Fietkau2-8/+8
When 802.3 decap offload is enabled, the hardware indicates header translation failure, whenever either the LLC-SNAP header was not found, or a VLAN header with an unregcognized tag is present. In that case, the hardware inserts a 2-byte length fields after the MAC addresses. For VLAN packets, this tag needs to be removed. However, for 802.3 LLC packets, the length bytes should be preserved, since there is no separate ethertype field in the data. This fixes an issue where the length field was omitted for LLC frames, causing them to be malformed after hardware decap. Fixes: 1eeff0b4c1a6 ("mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames") Reported-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221005130824.23371-1-nbd@nbd.name
2022-10-11can: kvaser_usb_leaf: Fix CAN state after restartAnssi Hannula1-0/+2
can_restart() expects CMD_START_CHIP to set the error state to ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards. Otherwise the user may immediately trigger restart again and hit a BUG_ON() in can_restart(). Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-11can: kvaser_usb_leaf: Fix TX queue out of sync after restartAnssi Hannula3-1/+5
The TX queue seems to be implicitly flushed by the hardware during bus-off or bus-off recovery, but the driver does not reset the TX bookkeeping. Despite not resetting TX bookkeeping the driver still re-enables TX queue unconditionally, leading to "cannot find free context" / NETDEV_TX_BUSY errors if the TX queue was full at bus-off time. Fix that by resetting TX bookkeeping on CAN restart. Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-11can: kvaser_usb: Fix use of uninitialized completionAnssi Hannula2-1/+2
flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and completed when the device sends CMD_FLUSH_QUEUE_RESP. This causes completion of uninitialized completion if the device sends CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a response to a flush by a previously bound driver, or a misbehaving device). Fix that by initializing flush_comp in kvaser_usb_init_one() like the other completions. This issue is only triggerable after RX URBs have been set up, i.e. the interface has been opened at least once. Cc: stable@vger.kernel.org Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-11can: kvaser_usb_leaf: Fix overread with an invalid commandAnssi Hannula1-0/+75
For command events read from the device, kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not exceed the size of the received data, but the actual kvaser_cmd handlers will happily read any kvaser_cmd fields without checking for cmd->len. This can cause an overread if the last cmd in the buffer is shorter than expected for the command type (with cmd->len showing the actual short size). Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of which are delivered to userspace as-is. Fix that by verifying the length of command before handling it. This issue can only occur after RX URBs have been set up, i.e. the interface has been opened at least once. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-10nfp: flower: fix incorrect struct type in GRE key_sizeLouis Peens1-2/+2
Looks like a copy-paste error sneaked in here at some point, causing the key_size for these tunnels to be calculated incorrectly. This size ends up being send to the firmware, causing unexpected behaviour in some cases. Fixes: 78a722af4ad9 ("nfp: flower: compile match for IPv6 tunnels") Reported-by: Chaoyong He <chaoyong.he@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20221007092132.218386-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10net: sfp: fill also 5gbase-r and 25gbase-r modes in sfp_parse_support()Marek Behún1-0/+3
Fill in also 5gbase-r and 25gbase-r PHY interface modes into the phy_interface_t bitmap in sfp_parse_support(). Fixes: fd580c983031 ("net: sfp: augment SFP parsing with phy_interface_t bitmap") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221007084844.20352-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10net: systemport: Enable all RX descriptors for SYSTEMPORT LiteFlorian Fainelli1-1/+1
The original commit that added support for the SYSTEMPORT Lite variant halved the number of RX descriptors due to a confusion between the number of descriptors and the number of descriptor words. There are 512 descriptor *words* which means 256 descriptors total. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221007034201.4126054-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10net: prestera: span: do not unbind things things that were never boundMaksym Glubokiy1-1/+4
Fixes: 13defa275eef ("net: marvell: prestera: Add matchall support") Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Link: https://lore.kernel.org/r/20221006190600.881740-1-maksym.glubokiy@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-10Merge tag 'mm-stable-2022-10-08' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...
2022-10-10Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-16/+32
Pull virtio updates from Michael Tsirkin: - 9k mtu perf improvements - vdpa feature provisioning - virtio blk SECURE ERASE support - fixes and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: don't try to use intxif pin is zero vDPA: conditionally read MTU and MAC in dev cfg space vDPA: fix spars cast warning in vdpa_dev_net_mq_config_fill vDPA: check virtio device features to detect MQ vDPA: check VIRTIO_NET_F_RSS for max_virtqueue_paris's presence vDPA: only report driver features if FEATURES_OK is set vDPA: allow userspace to query features of a vDPA device virtio_blk: add SECURE ERASE command support vp_vdpa: support feature provisioning vdpa_sim_net: support feature provisioning vdpa: device feature provisioning virtio-net: use mtu size as buffer length for big packets virtio-net: introduce and use helper function for guest gso support checks virtio: drop vp_legacy_set_queue_size virtio_ring: make vring_alloc_queue_packed prettier virtio_ring: split: Operators use unified style vhost: add __init/__exit annotations to module init/exit funcs
2022-10-10Merge tag 'v6.1-p1' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Feed untrusted RNGs into /dev/random - Allow HWRNG sleeping to be more interruptible - Create lib/utils module - Setting private keys no longer required for akcipher - Remove tcrypt mode=1000 - Reorganised Kconfig entries Algorithms: - Load x86/sha512 based on CPU features - Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher Drivers: - Add HACE crypto driver aspeed" * tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: aspeed - Remove redundant dev_err call crypto: scatterwalk - Remove unused inline function scatterwalk_aligned() crypto: aead - Remove unused inline functions from aead crypto: bcm - Simplify obtain the name for cipher crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf() hwrng: core - start hwrng kthread also for untrusted sources crypto: zip - remove the unneeded result variable crypto: qat - add limit to linked list parsing crypto: octeontx2 - Remove the unneeded result variable crypto: ccp - Remove the unneeded result variable crypto: aspeed - Fix check for platform_get_irq() errors crypto: virtio - fix memory-leak crypto: cavium - prevent integer overflow loading firmware crypto: marvell/octeontx - prevent integer overflows crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled crypto: hisilicon/qm - fix the qos value initialization crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs crypto: tcrypt - add async speed test for aria cipher crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher crypto: aria - prepare generic module for optimized implementations ...
2022-10-10wifi: mac80211_hwsim: avoid mac80211 warning on bad rateJohannes Berg1-0/+2
If the tool on the other side (e.g. wmediumd) gets confused about the rate, we hit a warning in mac80211. Silence that by effectively duplicating the check here and dropping the frame silently (in mac80211 it's dropped with the warning). Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10octeontx2-pf: mcs: fix possible memory leak in otx2_probe()Yang Yingliang1-1/+3
In error path after calling cn10k_mcs_init(), cn10k_mcs_free() need be called to avoid memory leak. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-09octeontx2-af: cn10k: mcs: Fix error return code in mcs_register_interrupts()Yang Yingliang1-1/+3
If alloc_mem() fails in mcs_register_interrupts(), it should return error code. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-09octeontx2-pf: mcs: fix missing unlock in some error pathsYang Yingliang1-2/+3
Add the missing unlock in some error paths. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-09macvlan: enforce a consistent minimal mtuEric Dumazet1-1/+1
macvlan should enforce a minimal mtu of 68, even at link creation. This patch avoids the current behavior (which could lead to crashes in ipv6 stack if the link is brought up) $ ip link add macvlan1 link eno1 mtu 8 type macvlan # This should fail ! $ ip link sh dev macvlan1 5: macvlan1@eno1: <BROADCAST,MULTICAST> mtu 8 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:47:6c:24:74:82 brd ff:ff:ff:ff:ff:ff $ ip link set macvlan1 mtu 67 Error: mtu less than device minimum. $ ip link set macvlan1 mtu 68 $ ip link set macvlan1 mtu 8 Error: mtu less than device minimum. Fixes: 91572088e3fd ("net: use core MTU range checking in core net infra") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-07virtio-net: use mtu size as buffer length for big packetsGavin Li1-13/+24
Currently add_recvbuf_big() allocates MAX_SKB_FRAGS segments for big packets even when GUEST_* offloads are not present on the device. However, if guest GSO is not supported, it would be sufficient to allocate segments to cover just up the MTU size and no further. Allocating the maximum amount of segments results in a large waste of buffer space in the queue, which limits the number of packets that can be buffered and can result in reduced performance. Therefore, if guest GSO is not supported, use the MTU to calculate the optimal amount of segments required. Below is the iperf TCP test results over a Mellanox NIC, using vDPA for 1 VQ, queue size 1024, before and after the change, with the iperf server running over the virtio-net interface. MTU(Bytes)/Bandwidth (Gbit/s) Before After 1500 22.5 22.4 9000 12.8 25.9 And result of queue size 256. MTU(Bytes)/Bandwidth (Gbit/s) Before After 9000 2.15 11.9 With this patch no degradation is observed with multiple below tests and feature bit combinations. Results are summarized below for q depth of 1024. Interface MTU is 1500 if MTU feature is disabled. MTU is set to 9000 in other tests. Features/ Bandwidth (Gbit/s) Before After mtu off 20.1 20.2 mtu/indirect on 17.4 17.3 mtu/indirect/packed on 17.2 17.2 Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Gavi Teitz <gavi@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Message-Id: <20220914144911.56422-3-gavinl@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-10-07virtio-net: introduce and use helper function for guest gso support checksGavin Li1-4/+9
Probe routine is already several hundred lines. Use helper function for guest gso support check. Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Gavi Teitz <gavi@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Message-Id: <20220914144911.56422-2-gavinl@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-07net: ethernet: bgmac: Remove -Warray-bounds exceptionKees Cook1-5/+0
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07net: ethernet: mediatek: Remove -Warray-bounds exceptionKees Cook1-5/+0
GCC-12 emits false positive -Warray-bounds warnings with CONFIG_UBSAN_SHIFT (-fsanitize=shift). This is fixed in GCC 13[1], and there is top-level Makefile logic to remove -Warray-bounds for known-bad GCC versions staring with commit f0be87c42cbd ("gcc-12: disable '-Warray-bounds' universally for now"). Remove the local work-around. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105679 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07prestera: matchall: do not rollback if rule existsSerhiy Boiko1-0/+2
If you try to create a 'mirror' ACL rule on a port that already has a mirror rule, prestera_span_rule_add() will fail with EEXIST error. This forces rollback procedure which destroys existing mirror rule on hardware leaving it visible in linux. Add an explicit check for EEXIST to prevent the deletion of the existing rule but keep user seeing error message: $ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p2 $ tc filter add dev sw1p1 ... skip_sw action mirred egress mirror dev sw1p3 RTNETLINK answers: File exists We have an error talking to the kernel Fixes: 13defa275eef ("net: marvell: prestera: Add matchall support") Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07net: enetc: Remove duplicated include in enetc_qos.cYang Li1-1/+0
net/pkt_sched.h is included twice in enetc_qos.c, remove one of them. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2334 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07octeontx2-pf: mcs: remove unneeded semicolonYang Li1-1/+1
Semicolon is not required after curly braces. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2332 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-07hv_netvsc: Fix race between VF offering and VF association message from hostGaurav Kohli3-1/+25
During vm boot, there might be possibility that vf registration call comes before the vf association from host to vm. And this might break netvsc vf path, To prevent the same block vf registration until vf bind message comes from host. Cc: stable@vger.kernel.org Fixes: 00d7ddba11436 ("hv_netvsc: pair VF based on serial number") Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-06Merge tag 'arm-drivers-6.1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...
2022-10-06wifi: mt76: fix rate reporting / throughput regression on mt7915 and newerFelix Fietkau1-2/+8
mt7915 and newer need to report the rate_info that's stored in wcid->rate, since they don't fill info->status.rates. Cc: Jonas Jelonek <jelonek.jonas@gmail.com> Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/all/CABXGCsP0znm9pS-MiKtyxTXR7XiyFVqen0qzNpicGHDZKCzbwg@mail.gmail.com/ Fixes: 44fa75f207d8 ("mac80211: extend current rate control tx status API") Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220927093823.6007-1-nbd@nbd.name
2022-10-05net: ethernet: adi: adin1110: Add check in netdev_eventAlexandru Tachici1-5/+8
Check whether this driver actually is the intended recipient of upper change event. Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20221003111636.54973-1-alexandru.tachici@analog.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05net: pse-pd: PSE_REGULATOR should depend on REGULATORGeert Uytterhoeven1-0/+1
The Regulator based PSE controller driver relies on regulator support to be enabled. If regulator support is disabled, it will still compile fine, but won't operate correctly. Hence add a dependency on REGULATOR, to prevent asking the user about this driver when configuring a kernel without regulator support. Fixes: 66741b4e94ca7bb1 ("net: pse-pd: add regulator based PSE driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/709caac8873ff2a8b72b92091429be7c1a939959.1664900558.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-04Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds5-17/+7
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-04Merge tag 'net-next-6.1' of ↵Linus Torvalds1150-23519/+80194
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Introduce and use a single page frag cache for allocating small skb heads, clawing back the 10-20% performance regression in UDP flood test from previous fixes. - Run packets which already went thru HW coalescing thru SW GRO. This significantly improves TCP segment coalescing and simplifies deployments as different workloads benefit from HW or SW GRO. - Shrink the size of the base zero-copy send structure. - Move TCP init under a new slow / sleepable version of DO_ONCE(). BPF: - Add BPF-specific, any-context-safe memory allocator. - Add helpers/kfuncs for PKCS#7 signature verification from BPF programs. - Define a new map type and related helpers for user space -> kernel communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF). - Allow targeting BPF iterators to loop through resources of one task/thread. - Add ability to call selected destructive functions. Expose crash_kexec() to allow BPF to trigger a kernel dump. Use CAP_SYS_BOOT check on the loading process to judge permissions. - Enable BPF to collect custom hierarchical cgroup stats efficiently by integrating with the rstat framework. - Support struct arguments for trampoline based programs. Only structs with size <= 16B and x86 are supported. - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping sockets (instead of just TCP and UDP sockets). - Add a helper for accessing CLOCK_TAI for time sensitive network related programs. - Support accessing network tunnel metadata's flags. - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open. - Add support for writing to Netfilter's nf_conn:mark. Protocols: - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation (MLO) work (802.11be, WiFi 7). - vsock: improve support for SO_RCVLOWAT. - SMC: support SO_REUSEPORT. - Netlink: define and document how to use netlink in a "modern" way. Support reporting missing attributes via extended ACK. - IPSec: support collect metadata mode for xfrm interfaces. - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST packets. - TCP: introduce optional per-netns connection hash table to allow better isolation between namespaces (opt-in, at the cost of memory and cache pressure). - MPTCP: support TCP_FASTOPEN_CONNECT. - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior. - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets. - Open vSwitch: - Allow specifying ifindex of new interfaces. - Allow conntrack and metering in non-initial user namespace. - TLS: support the Korean ARIA-GCM crypto algorithm. - Remove DECnet support. Driver API: - Allow selecting the conduit interface used by each port in DSA switches, at runtime. - Ethernet Power Sourcing Equipment and Power Device support. - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per traffic class max frame size for time-based packet schedules. - Support PHY rate matching - adapting between differing host-side and link-side speeds. - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode. - Validate OF (device tree) nodes for DSA shared ports; make phylink-related properties mandatory on DSA and CPU ports. Enforcing more uniformity should allow transitioning to phylink. - Require that flash component name used during update matches one of the components for which version is reported by info_get(). - Remove "weight" argument from driver-facing NAPI API as much as possible. It's one of those magic knobs which seemed like a good idea at the time but is too indirect to use in practice. - Support offload of TLS connections with 256 bit keys. New hardware / drivers: - Ethernet: - Microchip KSZ9896 6-port Gigabit Ethernet Switch - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs - Analog Devices ADIN1110 and ADIN2111 industrial single pair Ethernet (10BASE-T1L) MAC+PHY. - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP). - Ethernet SFPs / modules: - RollBall / Hilink / Turris 10G copper SFPs - HALNy GPON module - WiFi: - CYW43439 SDIO chipset (brcmfmac) - CYW89459 PCIe chipset (brcmfmac) - BCM4378 on Apple platforms (brcmfmac) Drivers: - CAN: - gs_usb: HW timestamp support - Ethernet PHYs: - lan8814: cable diagnostics - Ethernet NICs: - Intel (100G): - implement control of FCS/CRC stripping - port splitting via devlink - L2TPv3 filtering offload - nVidia/Mellanox: - tunnel offload for sub-functions - MACSec offload, w/ Extended packet number and replay window offload - significantly restructure, and optimize the AF_XDP support, align the behavior with other vendors - Huawei: - configuring DSCP map for traffic class selection - querying standard FEC statistics - querying SerDes lane number via ethtool - Marvell/Cavium: - egress priority flow control - MACSec offload - AMD/SolarFlare: - PTP over IPv6 and raw Ethernet - small / embedded: - ax88772: convert to phylink (to support SFP cages) - altera: tse: convert to phylink - ftgmac100: support fixed link - enetc: standard Ethtool counters - macb: ZynqMP SGMII dynamic configuration support - tsnep: support multi-queue and use page pool - lan743x: Rx IP & TCP checksum offload - igc: add xdp frags support to ndo_xdp_xmit - Ethernet high-speed switches: - Marvell (prestera): - support SPAN port features (traffic mirroring) - nexthop object offloading - Microchip (sparx5): - multicast forwarding offload - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets) - Ethernet embedded switches: - Marvell (mv88e6xxx): - support RGMII cmode - NXP (felix): - standardized ethtool counters - Microchip (lan966x): - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets) - traffic policing and mirroring - link aggregation / bonding offload - QUSGMII PHY mode support - Qualcomm 802.11ax WiFi (ath11k): - cold boot calibration support on WCN6750 - support to connect to a non-transmit MBSSID AP profile - enable remain-on-channel support on WCN6750 - Wake-on-WLAN support for WCN6750 - support to provide transmit power from firmware via nl80211 - support to get power save duration for each client - spectral scan support for 160 MHz - MediaTek WiFi (mt76): - WiFi-to-Ethernet bridging offload for MT7986 chips - RealTek WiFi (rtw89): - P2P support" * tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits) eth: pse: add missing static inlines once: rename _SLOW to _SLEEPABLE net: pse-pd: add regulator based PSE driver dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller ethtool: add interface to interact with Ethernet Power Equipment net: mdiobus: search for PSE nodes by parsing PHY nodes. net: mdiobus: fwnode_mdiobus_register_phy() rework error handling net: add framework to support Ethernet PSE and PDs devices dt-bindings: net: phy: add PoDL PSE property net: marvell: prestera: Propagate nh state from hw to kernel net: marvell: prestera: Add neighbour cache accounting net: marvell: prestera: add stub handler neighbour events net: marvell: prestera: Add heplers to interact with fib_notifier_info net: marvell: prestera: Add length macros for prestera_ip_addr net: marvell: prestera: add delayed wq and flush wq on deinit net: marvell: prestera: Add strict cleanup of fib arbiter net: marvell: prestera: Add cleanup of allocated fib_nodes net: marvell: prestera: Add router nexthops ABI eth: octeon: fix build after netif_napi_add() changes net/mlx5: E-Switch, Return EBUSY if can't get mode lock ...
2022-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski15-16/+58
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: pse-pd: add regulator based PSE driverOleksij Rempel3-0/+160
Add generic, regulator based PSE driver to support simple Power Sourcing Equipment without automatic classification support. This driver was tested on 10Bast-T1L switch with regulator based PoDL PSE. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03ethtool: add interface to interact with Ethernet Power EquipmentOleksij Rempel1-0/+58
Add interface to support Power Sourcing Equipment. At current step it provides generic way to address all variants of PSE devices as defined in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4 PoDL Power Sourcing Equipment (PSE). Currently supported and mandatory objects are: IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl This is minimal interface needed to control PSE on each separate ethernet port but it provides not all mandatory objects specified in IEEE 802.3-2018. Since "PoDL PSE" and "PSE" have similar names, but some different values I decide to not merge them and keep separate naming schema. This should allow as to be as close to IEEE 802.3 spec as possible and avoid name conflicts in the future. This implementation is connected to PHYs instead of MACs because PSE auto classification can potentially interfere with PHY auto negotiation. So, may be some extra PHY related initialization will be needed. With WIP version of ethtools interaction with PSE capable link looks as following: $ ip l ... 5: t1l1@eth0: <BROADCAST,MULTICAST> .. ... $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: disabled PoDL PSE Power Detection Status: disabled $ ethtool --set-pse t1l1 podl-pse-admin-control enable $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: enabled PoDL PSE Power Detection Status: delivering power Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: mdiobus: search for PSE nodes by parsing PHY nodes.Oleksij Rempel2-2/+37
Some PHYs can be linked with PSE (Power Sourcing Equipment), so search for related nodes and attach it to the phydev. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: mdiobus: fwnode_mdiobus_register_phy() rework error handlingOleksij Rempel1-9/+12
Rework error handling as preparation for PSE patch. This patch should make it easier to extend this function. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: add framework to support Ethernet PSE and PDs devicesOleksij Rempel5-0/+274
This framework was create with intention to provide support for Ethernet PSE (Power Sourcing Equipment) and PDs (Powered Device). At current step this patch implements generic PSE support for PoDL (Power over Data Lines 802.3bu) specification with reserving name space for PD devices as well. This framework can be extended to support 802.3af and 802.3at "Power via the Media Dependent Interface" (or PoE/Power over Ethernet) Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.